SBO Mailer, message fails to be sent

Hi,
I try to send invoices via SBO Mailer... the message appears in my SENT ITEMS (in Messages/alerts overview), but with a red X, meaning that there is an error while trying to send the message. When I try to send messages without attachments, it works.
How can I know what is the error ? I can see AOB1.Confirmed2 = 'E', but is there a field or another table where I can see the source of the error ?
Is there a timeout that can be configured within SBO Mailer ? Our customer has a slow internet connection, but when trying to send those invoices (in PDF) via Outlook, it works... so how can I know what's wrong with the mails containing attachments ?
thanks,
Luce

Hi Luce,
As note [693306|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMSZ3PTU4ODAwMDAr)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=693306] mentions:
Error 35 - this error occurs when trying to send an e-mail with an attachment, that cannot be created or accessed via the Attachments path as defined in SAP Business One. It is necessary to verify that there are no folder restrictions on the Attachments folder. It is also necessary to verify that the created attachment has a valid name. In case the operating system does not support the specific language used in SAP Business One, the Service Manager will not recognize the created file. In NT 4.0 Servers, try running the SBO Mailer under an Administrator account, instead of under a Local service account.
Regards
Mario

Similar Messages

The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly

I have a 2 server SharePoint farm.
All outgoing emails were working fine.
I just restarted both servers and now after that none of the emails are being sent. I am using OOB publishing workflow and it shows message:
The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
Even if I setup Alert on some list, it doesn't send email.
I have checked that outgoing email setting in CA is defined and like I said it was working fine without problems but after restart it is showing error.
What could be the cause of this and how to fix it?
EDIT
I removed outgoing mail server in CA, added again and restart IIS but still emails from OOB workflow is not being sent. But email from Alerts are being sent. Don't know what to do now.

This is really weird, It works when an alert is set but workflows doesn't send emails... Can you create a simple 1 Step workflow in SPD to send an email when a specific field is set. See if this sends an email..
AJ MCTS: SP 2010 Configuration MCSA: Windows 7 If you find this post useful kindly please mark it as an answer :) TY
I created a test workflow which sends email to user and it is also not sending email. But I am getting email from SharePoint regarding "variation" page changes as well as alerts which I told above.

I'm using Apple Mail 2.1.3 on a MacBook running OS 10.4.11. A very strange thing is happening. E-mail messages that I either sent or received months ago are showing up in my mailbox and receivers' mailboxes. Help!

I'm using Apple Mail 2.1.3 on a MacBook running OS 10.4.11. A very strange thing is happening. E-mail messages that I either sent or received months ago are showing up in my mailbox and receivers' mailboxes. In one case, a message someone had sent to me wound up in the mailbox of a third person, who was not included in the address list!! I have only two accounts, and have checked everything; only one account is showing the repeats Now, that account is my professional account, and it resides in three places: I use it on the laptop described here, I use it through Apple Mail on the much newer desktop Mac in my office, and I can run it through Web mail on my employer's server, which is where the professional account resides (I have a mailbox there, etc.) That program is called Zimbra.
My personal account is with Earthlink and is not doing the repeats. I access it either through my MacBook's Apple Mail or the Web; the Apple Mail on my office Mac is not configured to access the Earthlink server.
What IS going on here?? My friends, colleagues, and students (I teach college) are mystified by these ancient messages.
Thanks for any help!!

I'm using Apple Mail 2.1.3 on a MacBook running OS 10.4.11. A very strange thing is happening. E-mail messages that I either sent or received months ago are showing up in my mailbox and receivers' mailboxes. In one case, a message someone had sent to me wound up in the mailbox of a third person, who was not included in the address list!! I have only two accounts, and have checked everything; only one account is showing the repeats Now, that account is my professional account, and it resides in three places: I use it on the laptop described here, I use it through Apple Mail on the much newer desktop Mac in my office, and I can run it through Web mail on my employer's server, which is where the professional account resides (I have a mailbox there, etc.) That program is called Zimbra.
My personal account is with Earthlink and is not doing the repeats. I access it either through my MacBook's Apple Mail or the Web; the Apple Mail on my office Mac is not configured to access the Earthlink server.
What IS going on here?? My friends, colleagues, and students (I teach college) are mystified by these ancient messages.
Thanks for any help!!

"Returned mail: Message failed to pass through virus scanner"

We have a large number of this mail (see below) on our OCS1 cause by virus like MyDoom:
From: "Mail Delivery Subsystem" <[email protected]>
To: [email protected]
Mime-Version: 1.0
Content-Type: multipart/report;
     report-type=delivery-status; BOUNDARY="----ORCL_ES6_BOUNCE_1095724----"
Date: Fri, 22 Oct 2004 09:52:32 +0200
Subject: Returned mail: Message failed to pass through virus scanner
------ORCL_ES6_BOUNCE_1095724----
Content-Type: text/plain
The original message was received at Fri, 22 Oct 2004 09:51:21 +0200
from <[email protected]>
----- The following addresses had delivery problems -----
<[email protected]> (unrecoverable error)
----- Transcript of session follows -----
Message failed to pass through virus scanner
------ORCL_ES6_BOUNCE_1095724----
content-type: message/delivery-status
Reporting-MTA: dns; maildb.italtbs.com
Final-Recipient: rfc822;[email protected]
Action: failed
Status: 5.7.7
Diagnostic-Code: smtp; Message failed to pass through virus scanner
------ORCL_ES6_BOUNCE_1095724----
Content-Type: message/rfc822
Return-Path: <[email protected]>
Received: from mailas.italtbs.com by maildb.italtbs.com
     with ESMTP id 10957241098431481; Fri, 22 Oct 2004 09:51:21 +0200
Received: from italtbs.com
     by mailas.italtbs.com with SMTP id i9M7pJJ06571
     for <[email protected]>; Fri, 22 Oct 2004 09:51:19 +0200
Message-Id: <[email protected]>
From: [email protected]
To: [email protected]
Subject: Found
Date: Fri, 22 Oct 2004 09:50:40 +0200
MIME-Version: 1.0
Content-Type: multipart/mixed;
     boundary="----=_NextPart_000_0007_0000355F.0000439E"
X-Priority: 3
X-MSMail-Priority: Normal
------ORCL_ES6_BOUNCE_1095724------
On MAILAS.italtbs.com are installed infrastructure, sendmail and Symantec Scan Engine.
On MAILDB.italtbs.com are installed storage database and midtier.
Can I stop this useless messagges?
Thanks and regard
Matteo

Are you still unable to send email? What client are you using? Do you see your job represented on ePrintCenter?
Although I am an HP employee, I am speaking for myself and not for HP

Why mail messages appear bigger when sent?

Hello,
When I send an e-mail from Mail, some parts of the signature and the text appear in 16 instead of 12 as set in preferences. It looks normal when I right it but then when someone reply to me I can see that some of the text is bigger that what it is expected to be. (OS X 10.8.3)
This is really looking unprofessional and I am desperate to find a solution.
Thanks in advance.

I just had a flash and did a search for the sent messages, I found them in another accoun's sent folder. I am not sure why but it seems to be related to the fact that the other account (That received the sent mail) has my first account's address as a possible reply-to address. I just don't understand why a replied message from one account would use another account to send the message. Is there a setting to tell the mail app to reply with the same account?
Note that neither of these accounts are my default account.

SBO mailer message body configuration

Hi all,
I would like to know if we can configure the message body of an email, see belowé
1. Date Customer Remarks Due Date
111100029 07/25/2011 Amber Mann Based On Sales Orders 111000042. 07/25/2011
The customer would like to delete the Remarks,
any idea ?
thanks
Charles

Hi Charles,
This remark is linking to the table column directly. Unless you can taken out the column from the email source, nothing you can do about it.
Thanks,
Gordon

All my e-mail messages in Inbox & Sent are gone!!!

All my e-mail messages in the Inbox & Sent folder are gone!!!
How can I get them back? Where are they? Is this another issue like with Addressbook?
If I can't get them back, I will stop using the Mail & Addressbook applications altogether, and begin using Microsoft's Entourage program. It may be slow but it doesn't blow away my e-mails.

Thank you. Emails addressed to my ISP username arrive without problem in my account on its webmail, it's all the ones addressed to me at my domain name using my domain name that don't. The vast majority of the rest that are addressed to my domain name (about 95%, I presume, though have no way of checking) arrive without problem. I did notice emails from only one or two sites I'd subscribed to stopped mysteriously about 6 months ago, and thought their helplines looked into the matter there was no solution found. It was only very recently when I tried emailing some recipes from my iMac to my laptop, and noticed they never arrived, that I began to look into what was happening

Send Outgoing Mail Messages not working

I'm having trouble with a workflow that creates a new mail message, gets specified iCal items, creates a summary text file, attaches to mail message and then sends mail message. Everything is working except the mail message does not get sent. There are no logged error messages. I've experimented with changing up the order of the actions and noticed that when I place "Send Outgoing Messages" directly after "New Mail Message", the message gets sent without a problem. However in order for my workflow to make sense I need to have many intermediary steps before I trigger the send messages action.
Any clues on this problem. Thanks in advance.
Mac OS X (10.4.7)

Cascanuit-
I'm relatively new to Automator as well and by no means a programmer. It does seem that the iCal actions available are pretty meager. I did a search at www.automatorworld.com and there are a few additional actions but none that call out specific menu items.
Another way to approach your desired workflow is to create an applescript that selects Export... from the File Menu. I know very little beyond the basics of applescript but I did cobble together the following:
tell application "iCal" to activate
tell application "System Events"
tell application process "iCal"
set frontmost to true
click menu item "Export…" of menu 1 of menu bar item "File" of menu bar 1
delay 4
tell application "System Events"
keystroke return
end tell
end tell
end tell
Here's the weird part. This script works, but only sporadically. Sometimes it stalls at the selection of the Export button in the dialog box. I have no idea why it sometimes works and other times fails.
If someone could refine this script to make it bullet proof than you can simply incorporate it as an automator workflow and then save the created export file to another volume or anywhere you like.
Hope this helps some.

Gmail cannot receive email sent from SBO-Mailer

Dear All,
I can receive emails from SBO-Mailer to my company email. My colleague can also receive email sent to her company email. However, I can not receive email if it is sent to my gmail or hotmail or yahoo. Did I miss something?

Hi,
You may try to use this sap note solution if probably you are interested to use gmail smtp :
SBO Mailer doesn't work in Login Authentication mode
Symptom
You test connection in SBO mailer with Login Authentication mode unsuccessfully and the error message below is shown:
Login authentication failed. or
Login authentication not supported by SMTP server.
Also, you fail to send emls in SAP Business One with Login Authentication mode.
Other terms
SMTP
Reason and Prerequisites
Consulting
Solution
This is usually because of wrong settings in SBO mailer. Gmail for example, you should set as the following:
SMTP Server: smtp.gmil.com
SMTP Port: 587
Username: ***@gmil.com
Password: ****
Encoding: English (United States)
SMTP Client: Microsoft .NET
Authentication: Basic Authentication
Use TLS Encryption: Yes
If you choose Microsoft .NET as SMTP Client, the "test connection" button in SBO mailer is invalid but it can still send emails in SAP Business One.
JimM

The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly.

Hi,
I have SP 2013, and it was working properly. and workflows send emails perfectly. yesterday, i decided to build a fresh site collection so i deleted the old one and created a new one. now, workflows are unable to send emails. i'm sure it has nothing to do
with my mail server cuz no changes happened to it. i'm sure about the settings for outgoing mail on central admin. all i did, was to enter mail server IP in outgoing mail field and email below it.
in the workflow status the status says "error" followed by this message: "The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly."
Any help please?

Hi,
According to your post, my understanding is that you failed to send email after building a fresh site collection.
I recommend to verify that you have entered your SMTP server name correctly.
You can add it as FQDN e.g. ServerName.DomainName.
Here are a similar articles for your reference:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/f0605f59-0baa-49c9-854e-0fb369a9e5a0/cant-seem-to-get-emails-to-send-in-sharepoint
http://alpesh.nakars.com/blog/sharepoint-outgoing-email-issue/
Best Regards,
Linda
Linda Li
TechNet Community Support

Error message when sending mail : sending the message failed because you have exceeeded your sending limit"

I was trying to email a link from a webpage I loaded in safari. The email sits in my outbox with a red exclamation point. WIll not send. Keeping getting an error message sending the message failed because you have exceeded your sending limit

"I keep getting a "you have exceeded your limit" on my email."
No explanation, makes no sense, it's happening with others.
I have to change (in my outgoing/unsent folder) my sending address from .mac to me.com. After reading the following helpful post:
To get outbox individual mails sent, Try going to outbox, opening each email to edit and change sending email to [email protected] by clicking arrow in from line. If [email protected] account does not show, go to settings > mail > icloud account > add "[email protected]" And, until this issue is resolved, set mail to send from [email protected]
(and you should be using smtp.mail.me.com)

"Mail Delivery Failed:returning message to sender" recipients not familiar

I am getting a "Mail Delivery Failed" message. The address' that failed are to recipients I am not familiar with and have not tried to email. Has my email been hijacked?

I'm getting the same problem ... only it happens to anyone who sends a message TO me. This only happens on my .mac address --- not other email addresses that I use. It's as if the .mac smtp code is ADDING a bcc to any message sent to me! All the comments to date have been less than encouraging - surely SOMETHING can be done about this! No?

Cannot get rid of mail message which failed to send

I am "stuck" with a MAIL message which failed to send and has returned: "cannot send message using the server smtp.gmail.com:...... ".
I cannot delete it since the "delete" radio button on the message in inactive, it's not in the outbox or in "drafts".
It's sitting there and even if MAIL is closed and relaunched or if the system is restarted it appears again.

There are five messages in my Outbox.mbox>Messages folder (suffix .emix) all dated today. Only one of them is from my .mac account, the rest from Verizon email accounts. When I sent the .mac email, it seemed to be sent, but a copy did not end up in my sent folder as it usually does, yet the others all did. I’ve closed and reopened Apple Mail as well as restarted my system (iMac) and they are still there. Why are those 5 emails in the Outbox.mbox>Messages folder? Nothing shows up in the “Outbox” in my Mail sidebar. And if they have not been sent, how do I send them?

I use a gmail account for my mail. When I send an email I sometimes get multiple duplicates (up to 10-12) of the same sent message saved in my sent file. help

I use a gmail account for my mail. When I send an email I sometimes get multiple duplicates (up to 10-12) of the same sent message saved in my sent file. help

Did you check your user name and password in Settings>Mail,Contacts,Calendars...tap your email account, tap SMTP, then tap the primary server name. Make sure the settings there are correct.

E-mail messages sent, are received not in the paragraph-form as sent, but

Dear Friends,
E-mail messages sent, are received not in the paragraph-form as sent, but are broken-up into small segments, one line finely printed, the next line may appear with just two or three words printed on it, then the next line will show a few words at the end of it, while the next line appears as the start of another paragraph, and so on and on and on. So that the original message, although sent in the one paragraph-form, winds up being received as several paragraphs, each broken up into several segments. My contacting Apple has produced no solution thus far. I am new at this computer business and would greatly appreciate any help you can give me on this score. Thanking you in advance for your interest and kind help.
Yours Truly,
GMS.

Dear Friends,
E-mail messages sent, are received not in the paragraph-form as sent, but are broken-up into small segments, one line finely printed, the next line may appear with two or three words printed on it, then the next line will show a few words at the end of it, while the next line appears as the start of another paragraph, and so on and on and on. So that the original message, although sent in the one paragraph-form, winds up being received as several paragraphs, each broken up into several segments. My contacting Apple has produced no solution thus far. I am new at this computer
business and would greatly appreciate any help you can give me on this score. Thanking you in advance for your interest and kind help.
Yours Truly,
Broduff.

SBO Mailer, message fails to be sent

Similar Messages

Maybe you are looking for