Folders checked out by vlt are not under jcr_root, but at same level
When I used vlt to check out the subfolders of jcr_root, all folders weren't under jcr_root, but next to it, jcr_root and these folders were at the same level, I don't know why.
Did u move exactly up to src\main\content to checkout ?
Similar Messages
-
How do I find out what features are not useful in my Classifier?
How do I find out what features are not useful in my Classifier? I am trying to trim down the number of features to speed up the training of my data, I have about 3700 features. I have found the Filter Based Feature Selection Module and have not been successful
in using it. I have looked through all the examples and have not been able to find any examples using the module. Will the Filter Based Feature Selection Module help me to trim features. If so how do I use it?One way to do this would be is to use a random forest classifier. Feature/variable importance can be obtained relatively easily with random forests.
Here is how you may do it in R.
> install.packages('randomForest') #install randomForest package in R if it is not already there
> library(randomForest) # reference the library
> data(mtcars) # load motor cars data that ships with
#train a random forest
> mtcars.rf <- randomForest(mpg ~ ., data=mtcars, ntree=1000,keep.forest=FALSE, importance=TRUE)
> importance(mtcars.rf)
> importance(mtcars.rf)
#You will see an output like below
%IncMSE IncNodePurity
cyl 16.168645 169.96741
disp 18.672188 260.08722
hp 17.584375 184.95007
drat 6.948743 63.54528
wt 17.818509 254.30347
qsec 4.772889 33.25546
vs 5.303058 24.39064
am 5.210181 17.36626
gear 4.619161 21.55450
carb 8.577037 28.46715
# or plot the importance as follows
> varImpPlot(mtcars.rf)
What this tells you is how important predictors/features/variables like horsepower(hp), weight(wt), no. of cylinders (cyl) is in predicting miles per gallon (mpg).
If you are wondering how the data looks like. Try this
head(mtcars) # gives first few lines of the data set.
mpg cyl disp hp drat wt ...
Mazda RX4 21.0 6 160 110 3.90 2.62 ...
Mazda RX4 Wag 21.0 6 160 110 3.90 2.88 ...
Datsun 710 22.8 4 108 93 3.85 2.32 ...
. Try this
Here is a few useful resources:
Random Forest documentation (Check out the pages on variable importance and variable importance plot)
http://cran.r-project.org/web/packages/randomForest/randomForest.pdf
Motor cars data: http://stat.ethz.ch/R-manual/R-devel/library/datasets/html/mtcars.html -
My Library has ten more songs than my iPod. How can I find out which songs are not syncing?
I recently had to purchase a new hard drive. Because the size of my music collection exceeds 140 GB, I stored all of my music on a separate external hard drive. When I exported everything back into my new iTunes library, I found that I had about 200 more songs than I had in the previous library. After deleting most of those extraneous songs, I was able to get my library close to where it was before. However, after syncing to my iPod Classic, I noticed that only 34,853 of the 34,863 loaded. How can I figure out which of those ten songs in my library did not sync to my iPod?
Yellow12It may be that the 10 songs are unchecked. To find them select songs view.
If there is a column Heading marked with a tick then click on it to sort by this column.
If the Column is not there then View > View Options and select the Checked column which will then display
Check the songs by putting ticks in the empty boxes and resynch. Now those tracks should go over as well -
I try to put music in my ipod through itunes but it's not letting me do it. it tells me it's doing it, but when I check. My songs are not there
OOk so I have my new Apple id in my iTunes account but my old Apple ID is the one that is in the iCloud account which is the Apple ID have been using for years and the reason I cannot get it on this abled is because somebody was using my credit card or debit card that was on file for family sharing and it was a stolen iPhone from my account so they had to disable my Apple ID and I could not use my debit card anymore on any Apple ID ever again they said because of it so I can't get it not to be disabled and I can't sign into iTunes with it I already have signed out and signed in with my new Apple ID for iTunes it's just iCloud is not letting me load anything so pretty much what I've been doing is I have to erase every app and then re-dumb going to iTunes and re-download the apps again but the only issue is that I still have a disabled Apple ID as my iCloud settings and my iCloud family sharing in all of that so I'm wondering how or is it possible to change my Apple ID for iCloud specifically because when I go into Icloud and settings and go into my name where my Apple ID is the one that's disabled it doesn't say anything about log out or sign out or anything like that it just says to put the password for it so is there a way to change the Apple ID for my iCloud so that my iTunes in my iCloud is the same Apple ID?
-
Revision: 10676
Author: [email protected]
Date: 2009-09-29 07:06:03 -0700 (Tue, 29 Sep 2009)
Log Message:
Removing JavaScript getters and setters: Wei found out that these are not supported by Internet Explorer.
Modified Paths:
osmf/trunk/apps/samples/framework/HTMLGatewaySample/html-template/index.template.html
osmf/trunk/framework/MediaFramework/org/openvideoplayer/gateways/HTMLGateway.asHello ZeroThirtySeven,
Do you mean that you want to use group policy to make users can visit the web application in Internet Explorer version 7?
Enterprise Mode, a compatibility mode that runs on Internet Explorer 11 on Windows 8.1 Update and Windows 7 devices, lets websites render using a modified browser configuration that’s designed to emulate Internet Explorer 8.
We could check if the web application can run in the Enterprise mode.
If it can, please take a look at the following article to use group policy to turn on Enterprise Mode.
http://msdn.microsoft.com/en-us/library/dn640699.aspx
Please take a look at the following thread about set IE compatibility mode by group policy.
https://social.technet.microsoft.com/Forums/windowsserver/en-US/95c0b8e6-72b5-472f-a5cb-07b17a8294a1/ie-compatibility-mode-not-applying-via-group-policy
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support -
I add links when I am building the website to pages within the site.(they work) Then I publish the site but when I check it out online the links don't work?
There itsn't much to check for others if you do not provide useful information, such as an URL.
In the meantime, check that the links are not covered by other objects. -
My folders in my email accounts are not on my phone? Only with one email address are they. Any reason why?
Care to share which OS, email client & versions you are using?
iOS is for mobile devices. -
I can not restore and upgrade my Iphone 4. When i plug in to computer itune's restore and check for update buttons are not active. What is that mean?
Razmee,
Guess what? After posting, I read another thread on this topic where someone said they went to an Apple store and the tech person there added the optional username and password in the Outgoing Mail Server boxes, and then reset the phone again. Although I had tried resetting and restarting a few times today, I had NOT reset it after entering the username and password into the optional fields.
When I entered my username and password into the optional fields, the iPhone entered checks (ticks) to the right of every entry; it had not done this earlier. (I didn't reset at this time, and the outgoing mail would still not transmit).
So just now, I reset it and the outgoing email was sent!
Thanks to you and this forum, it's a great ending to a few frustrating days.
I hope this message helps others. Not only does everything have to be entered correctly in the respective boxes; but once everything is entered and you press the "Done" button, every box should then have a check mark next to it and then you must reset the phone. -
My folders in my I-Phone are not displaying or populating.....How may I fix it?......
What type of account is it? If POP and you just setup, then yes that is all you will see. Once you send, you will get sent times. Once you delete you will get trash.
-
I have several charges on my checking account statement that are not mind.
I have several charges on my checking account statement that are not mine.
You've checked the purchase history on your iTunes account ? If you log into your account on your computer's iTunes via the Store > View Account menu option, you should then see a Purchase History section with a 'see all' link to the right of it, click on that and you should then see a list of your purchases. On your iPad you can see the last 90 days purchases via http://reportaproblem.apple.com
If you don't recognise the charges, and nobody else has access to your account or devices and made them, then try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
I phone 6 packaging is horrible. The phone sits on top of the box and fall out of you are not extra careful. For an $800 phone I expect good packaging. My phone fell as soon as I opened the box and now it's scratched on the corner. I am very disappointed.
I agree with you. It has almost happened to me.. The Box is difficult to open and unless you are very careful, when it finally does come open, it is very easy for what happened to you to happen...
-
Anyone any advice on how to stop my mail "activity" from continuously caching? is this a problem? I have had inbox issues recently that are not resolved yet but I am not sure if they are related.
Quit Mail. Force quit if necessary.
Back up all data. That means you know you can restore the Mail database, no matter what happens.
Triple-click the line below on this page to select it:
~/Library/Mail/V2/MailData/Envelope Index
Copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder
from the menu bar. Paste into the box that opens (command-V), then press return.
A Finder window will open with a file selected. Move the selected file to the Desktop, leaving the window open. Other files in the folder may have names that begin with "Envelope Index". Move those files, if any, to the Trash.
Log out and log back in. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is corrupt and that Mail has to quit. Click OK.
Test. If Mail now works as expected, you can delete the file you moved to the Desktop. Otherwise, post your results. -
Documents are appearing in J1INMIS but the same are not appring in Form 26Q
Hi,
Documents are appearing in J1INMIS but the same are not appearing in Consolidated Form 26Q.(J1INQEFILE).
Can anyone give me the solution for above.
Thanks & Regards,
reddyHi Reddy,
So you have completed the challan & update of Bank challan steps?
I implemented CIN in India in Summer 2009 & we found a number of issues & bugs with the standard code, particularly around the TDS process. During the J1INMIS processing we found that a number of tables were not being updated (Challan update) & we had to copy & fix the code ourselves as J1INMIS (so I'm lead to believe) is not supported by SAP any longer.
Good luck!
Regards,
Steve -
How can I get GV and HDV files imported to Premier Elements 13. I know now that they are not supported. But does it exist ways to get them. I use camera HDR-HS7E?
skjeggi
What is this HDR-HS7E - a miniDV camcorder that lets you do DV and HDV capture firewire?
True, the DV and HDV capture firewire into the Premiere Elements 13 Capture window is gone. But, have you
looked at the workaround suggested by PRE_help in this forum. The workaround is found in the following
Adobe document....
http://helpx.adobe.com/premiere-elements/kb/removed-features-formats-elements.html
When your schedule permits, please let us know if that worked for you.
Thank you.
ATR -
I downloaded Magzter app button iPad 2 but when I buy magazines it is not getting downloaded but the same is getting downloaded in my iPod. Pl help. Magzter support is unable to help.
You will not be able to see what version you are running until the iPad is activated. It will be in Settings>General>About >Version when you can get to the settings app.
The slider bar that you are describing sounds like the screen lock side switch and that has no bearing on setting up the iPad or connecting to WiFi.
Why don't you try rebooting your router? Unplug it for about 30 seconds and then plug it in again and see if the iPad will recognize and join the network.
Maybe you are looking for
-
How to: username as default value in a form
How can I use the user_name (portal user: wwsec_person.user_name) as a default value in a form. When I use #USER I get the db_user value.
-
I've been working on a project for a few days now, everything's been fine. Last night while editing, something happened when I was trying to add a transition between two clips. Now I can't select or edit any clips in the timeline anymore, and can't a
-
How do i set up a ring back?
HOw do i set up a ring back on an 3GS i phone?
-
How could i get the kernel and user cpu usage for each process
Hi all, In order to monitor the system CPU usage, I would like write a script to gather the kernel and user CPU usage for each process, like the prstat or top does. As always missing the shortlived kernel usage, prstat or top cann't get the precise C
-
Parse XML in a Floater extension
Hello, I am attempting to write a little floater extension that will show some data from one of our internal servers. I need to call a REST service from the extension, parse the XML and display the result. Note this does nothing to the currently open