Follow on document display doesn't show any PO no. for Service SC
Hi,
We are using SRM 4.0 with extended classic scenario & currently on support pack 7.
Follow On document display in SC doesn't show PO no.
This Problem seems to be happening only for "Request external staff SC" & "Order SC" functionality ( BBPSC03) while ordering services. Link between SC & follow on document (PO) goes missing even though PO is properly created in SRM system ( being a Extended classic scenario) & also PO copy is available in R/3.
Service SC looks okay if we order it through "internal goods/Service", Describe requirement or through catalogue application.
any help is appreciated & rewarded with full points.
Regards
Bharat
I was a little bit impatient.
Juste need to wait that some people actualy use the transaction so that the system can record the datas. :-s
Similar Messages
-
Am I doing something wrong?
I only see the "old" view, which shows the files located in the "Pages", "Numbers" and "Keynote" Folder in iCloud Drive.
Thank you!
AlexThat's because the Mac version of Pages hasn't been updated for iCloud compatibility, only the iOS versions have.
Currently you have to manually upload and download Mac Pages documents at http://www.icloud.com/ for them to "sync" with the iOS version. -
BPEL Console doesn't show any instances created
Hi,
We are using file protocol to read the files from trading partner into B2B. File is successfully processes by B2B. I can see that in reports.
Then I have defined a BPEL process to Dequeue the messages from B2B using AQ Adapter, transforms and places the files in the local file system.
The BPEL process is simple flow with one receive , transform and invoke activity.
I have configured AQ adapter using WSIF browser. I can see the deployed document definition in browser.
I have the TP agreement deployed, BPEL process deployed, but I don't see the 850 file processed. BPEL Console doesn't show any instances created. How would I know where what went wrong?
Please help.Try using java oracle.tip.adapter.b2b.data.IPDequeue to dequeue the message and see if you can dequeue
Then you'l be able to pin point if the issue is with your BPEL or with B2B Queue's
Kalyan -
"Dependecies" tab doesn't show any information for a selected table version 4.0
Hello,
I work with SQL Developer 4.0.0.13. I can see 20 tables in the list. When I select one table, in the tabs on the right side I can see information for "columns" and "data" and "constraints" and "indexes"... but the tab "Dependencies" doesn't show any information about references between this table and other tables in the schema.
Oracle database is v11.2
Can you please tell me what do I need to do in order to see information on "Dependencies" tab for a table?
Thank you,
MilanHi, here is my example of XML extension showing referencing tables:
Save the following XML to a file.
<items>
<item type="editor" objectType="TABLE">
<title><![CDATA[*Referencing Tables]]></title>
<query>
<sql><![CDATA[SELECT
cfk.owner "OWNER",
cfk.table_name "TABLE NAME",
cols.column_name "COLUMN",
cfk.constraint_name "CONSTRAINT NAME",
cfk.delete_rule "DELETE RULE",
'SQLDEV:LINK:' || cfk.owner || ':TABLE:' || cfk.table_name ||
':oracle.dbtools.raptor.controls.grid.DefaultDrillLink' "LINK"
FROM
sys.all_constraints cpk,
sys.all_constraints cfk,
sys.all_cons_columns cols
WHERE
cpk.owner = :OBJECT_OWNER AND
cpk.table_name = :OBJECT_NAME AND
SUBSTR(cpk.table_name, 1, 4) != 'BIN$' AND
SUBSTR(cpk.table_name, 1, 3) != 'DR$' AND
cpk.constraint_type in ('P', 'U') AND
cfk.r_owner = cpk.owner AND
cfk.r_constraint_name = cpk.constraint_name AND
cfk.constraint_type = 'R' AND
cols.owner = cfk.owner AND
cols.constraint_name = cfk.constraint_name
ORDER BY
cfk.owner, cfk.table_name, cfk.constraint_name,
cols.column_name]]>
</sql>
</query>
</item>
</items>
In SQLDeveloper select Preferences -> Database -> User Defined Extensions and click <Add Row>.
In the "Type" field enter "EDITOR" and in the "Location" field enter the path to the file with XML.
After restarting SQLDeveloper You should see a new tab "*Referencing Tables" for tables. -
The document Address doesn't show the block when country isn't USA
hello
i have a little problem, when I create a new document for a customer which ship to address's country is different from USA, the document Address doesn't show the block. i checked the bp address in the bp master data and the block is written, also when i click on the ... button near the ship or bill to address the block has a value !! but when i go back to the document, there is an empty space where the block has to be in the document address.
is there any configuration to solve this problem
thanks a lot!Hi,
The configuration is under Admin-Setup-BP-Address Format. Each country has a built-in format for address initially.
Thanks,
Gordon -
IPS MC: It doesn´t show any signature.
Hi.
I had IPS MC 2.1.0 (Build 123) functioning fine. I installed the idsmdc2.1.0-win-CSCsc336961.tar file in order to solve the CSCsc33696 bug. Next, I installed an update signature for IPS version 5 (But I didn´t has any IPS sensor version 5, I just was checking), but the update didn´t work. Afther it, I noted that I have a big issue: When I try to modify any signature, in the Settings->IOS IPS, it shows:
Object loading failed. Errors occurred while loading the Signatures. Not all signatures may have been loaded.
It doesn´t show any signature.
I erased all the sensors, including the IOS IPS. Then I import one of the IOS IPS and follow the instruction for the CSCsc33696 bug. I reimported the device, deployed configuration, disabled the IPS feature in the router and enabled the feature in order to load the signature configuration, but the issue persist. Then, I installed the newest signature update to IDS sensor version 4 (it includes IOS IPS update) and it installed without problems, but the problem in the sigature page perisist.
I reinstalled the IPS MC, but the problem persist. I uninstalled the IDS MC, and installed again without save the database. It shows the application IDS MC and Security Monitor without configuration, like a new installation, but the issue persist!!!
Someone had this problem? Someone know how can I solve it?
Thanks.The Cisco IOS IPS feature restructures the existing Cisco IOS Intrusion Detection System (IDS), allowing customers to choose to load the default, built-in signatures or to load a Signature Definition File (SDF) called attack-drop.sdf onto the router. The attack-drop.sdf file contains 118 high-fidelity Intrusion Prevention System (IPS) signatures, providing customers with the latest available detection of security threats. For more information refer to following url:
http://www.cisco.com/en/US/products/ps5854/prod_configuration_guide09186a00802c9587.html -
I have just changed internet providers from BT to Virgin, and now my iTunes doesn't show any of my airport express devices. I assume that I have to reconfigure them to the the new wireless but how do I do this frmo my PC? Thanks
I would recommend that you start by performing a "factory default" reset on each of your AirPort Express base stations. Once completed, you can use the following Apple Support article to configure each base station for streaming.
-
My App Store Doesn't Show Any Thing , and not working .
Today I've Noticed that My App Store Application is Not Working , and even I Can't Click On any Tabs ,and all of menu bar items such as sign out,sign in doesn't work . and doesn't Show Loading Status Bar, and doesn't show any message as you see in this picture :
I've Tried There Solutions:
Reset PRAM
Delete App Store Cache Files
Signed Out of Itunes And and signed in again
clear History and web site data in safari
But Nothing Changed .
(Sorry My English is Not Good at all , But i'll be thankful if you help me )Test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
Step 1
Sign in to the App Store by selecting Sign In from the Store menu. If you're already signed in, sign out and then sign in again.
Step 2
Log out or restart the computer.
Step 3
Remove or disable "LittleSnitch" or any similar third-party software that blocks outgoing network connections according to the developer's instructions.
Step 4
Start up in safe mode and log in to the account with the problem.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
After testing, restart as usual (not in safe mode.)
Step 5
If possible, connect to a different network and test.
Step 6
There are reports that resetting the PRAM may solve the problem in some cases. I can't confirm. -
Office365 - PasswordNeverExpires status doesn't show any status
Dear all,
I have a question about office365 passwordneverexpire setting.
Normally, when I execute the command "get-msoluser -userprincipalname "UserID" |select PasswordNeverExpires ", I can see the status "True/False". But, in my case, it doesn't show any status.
Thanks,
MinLooks like the "Administrative queues" implementation could have been planned around design time. Then the requests could be assigned and managed by different roles(groups) member with different access levels in OIM.
However, in my current setup - all workflows follows this rule 1) Route the request for manager approval 2) After successful manager approval, route it for application group approval (2nd step of approval). Implementation of "Administrative queues" in this setup looks difficult to me.
Any comment?
Thanks, -
IPhoto app doesn't show any photos from my photos app
I just upgraded my new iPad to iOS 6 beta. Maybe that's the problem but suddenly my iPhoto app doesn't show any photos at all. All the tabs (albums, photos, events, etc) are empty. When I open the app it says "updating photo library" briefly, but that's it. I tried rebooting, deleting the app and reinstalling it, basically everything I could. Is this a known iOs6 bug?
Ok, I have the release and I have the issue, photos are just boxes w no pictures, is there a way to remove library and reload? The photo app works fine and all pictures are there.
-
When I try to access my emails the screen opens but doesn't show any emails
When I try to access my emails the screen opens but doesn't show any emails
Tap to open a new tab and Private will be at the bottom left of the page. If it is active, tap to turn it off.
-
Tools sync now doesn't show any progress bar???
I have created sync module for firefox.
But when i click on : Tools > sync now
Why it doesn't show any progress bar???
Firexfox team should look into this matter.
I love firefox.
Best Regards,
Jason MalaysiaYup Okay..
But i'm now wondering, if it run background:-
Where does it update sync to?
Is it into my firefox account?
Where i can see my backup bookmarks?
Best Regards,
Jason Malaysia -
Running Sync BPEL process doesn't show any HTML form /XML source for input
Hi
I designed,compiled and deployed SYNC BPEL process on to server
but when I opened console and try to run the process, it doesn't show any form for input
Actually it has to take input
Where I am doing wrong...?
Thanks for any help...Hi Praveen,
That is correct, you're not doing anything wrong. The BPEL Console doesn't show any forms for testing the services if the service is synchronous.
I test my synchronous webservices with Eviware SoapUI. This is a freeware tool. Check: http://www.soapui.org/
Just create a new project in soapUI, create a new request from WSDL, copy and paste the WSDL in soapUI. It will generate a default request for you, which you can edit and execute.
HTH,
Bas -
when i call someone who already connected with another call it doesn't show any wating notification. why? it is very important. all other mobiles have this option. Please give me some solution.
Your iPhone can take multiple calls. If you answer your phone from one person or call someone and another call comes into you, you will hear a beep and if you pull your phone away from your ear, you will see that you can hang up the call with the 1st person or answer the 2nd call and then swap between the two.
I have no idea what you mean by you calling someone who is already talking to someone. I've never been able to see on my iPhone that someone I'm calling is already talking to someone else. -
I changed my username and now afp doesn't show any users. I have file sharing on. And also when I select "get more info" on the shared folders they don't have my username in there. it just has "applepc(me)" my old username before changing it showed the correct username? please any help would be great.
Turn Time Machine OFF temporarily in its preference pane. Leave the window open.
Navigate in the Finder to your backup disk, and then to the folder named "Backups.backupdb" at the top level of the volume. If you back up over a network, you'll first have to mount the disk image file containing your backups by double-clicking it. Descend into the folder until you see the snapshots, which are represented by folders with a name that begins with the date of the snapshot. Find the one you want to restore from. There's a link named "Latest" representing the most recent snapshot. Use that one, if possible. Otherwise, you'll have to remember the date of the snapshot you choose.
Inside the snapshot folder is a folder hierarchy like the one on the source disk. Find one of the items you can't restore and select it. Open the Info dialog for the selected item. In the Sharing & Permissions section, you may see an entry in the access list that shows "Fetching…" in the Name column. If so, click the lock icon in the lower right corner of the dialog and authenticate. Then delete the "Fetching…" item from the icon list. Click the gear icon below the list and select Apply to enclosed items from the popup menu.
Now you should be able either to copy the item in the Finder or to restore it in the time-travel view. If you use the time-travel view, be sure to select the snapshot you just modified. If successful, repeat the operation with the other items you were unable to restore. You can select multiple items in the Finder and open a single Info dialog for all of them by pressing the key combination option-command-I.
When you're done, turn TM back ON and close its preference pane.
Maybe you are looking for
-
Okay: My start page is the one Google provides: http://www.google.ca/firefox?client=firefox-a&rls=org.mozilla:en-US:official and frequently it has a note underneath the search box that "You're not on the latest version of Firefox. Upgrade today to ge
-
How to Filter a filtered Query with in a single query
Hi all, Thanks in advance , Below is the query SELECT * FROM (SELECT MitarbeiterListe.IDMITARBEITERLISTE, MITARBEITERLISTE.JAHR , MITARBEITERLISTE.mitarbeiter , FIRMA.FIRMA , Abteilung.Abteilung , MitarbeiterStatus.mitarbeiterstatus , MitarbeiterList
-
Connecting Audigy2 to Speakers with TRS jacks
I would like to connect my Audigy 2 soundcard to a pair of speakers that only comes with XLR and TRS inputs. How can I go about it. If I want to achieve a balanced connection, if possible, how can I go about it? If not, what can I do to make use of t
-
Hi, I have XE installed in a Windows Server 2003 R2 (same problem in Windows XP). Everytime I shutdown the machine or reboot it, I get a new file "core_xe_pid_448_tid_x1CC_2007_9_20_11_3_13.log" in "C:\oraclexe\app\oracle\product\10.2.0\server\databa
-
i make a matrix report and the data is arabic when i make concurrent pdf or html the arabic is not appear as i want. when i try to make a template i can't because the option is table or table/form. what is the solution?