Follow-up Activities for ERP Order (ERP_H)

Hello,
is it possible to create follow-up activities for documents which are in ERP (not CRM).
For example for the quotations and sales orders which are visible in CRM using component ERP_H?
Is anybody using such a scenario of CRM activities for ERP quotations / orders?
Thanks a lot
best regards
Manfred

Hi Manfred,
It is possible to create follow-up activities for documents which are in ERP (not CRM) like the ERP Sales Order as a Standard functionality, meaning the Activities in CRM can be created as a follow up document to ERP sales order.
Assign the Channel Interaction Center WebClient to the transaction type (Activities) in SPRO and you will see the follow up activity to the ERP Sales order
Is anybody using such a scenario of CRM activities for ERP quotations / orders?
--> We have a scenario to create an activity from ERP order. I assigned the channel as mentioned above and I can see the follow up activity to ERP sales Order.
Hope this helps.
Regards,
Chandrakant

Similar Messages

  • Upgrade to 4.0 - asking for 'follow-up activities for middleware'?!??!!

    HI,
    My upgrade from 3.1 to 4.0 has been going smoothly up to now.
    It stopped in phase REQ_BBWPCRM now asking me to perform the actions in the chapter 'Follow-up activities for the Middleware' in the documentation 'Upgrade Guide - CRM 5.0'.
    No mention of this is made in the Solution Manager 4.0 upgrade guide. I had a look at the CRM upgrade guide and those steps have nothing to do at all with Solution Manager and seem very CRM specific.
    Anyone has any advice on what to do at this point?
    I am tempted to just ignore this and to say Continue in the Upgrade Assistant, but I dont want to miss something important and then have to restore.

    See:
    * http://kb.mozillazine.org/Software_Update (Software Update not working properly)
    Remove the files in the updates and updates\0 folder.
    You may need to delete active-update.xml and updates.xml as well if present.
    You can probably find the updates folder in the Firefox program folder.

  • How to configure follow up transactions for service order

    Dear All,
    I want to configure follow up transactions for service order as I already there is follow up transaction
    For Service order below are follow up transactions
    Service confirmation
    Warranty claim
    complaints
    Task 
    If I want to add customized one then how to add ?? as I am not able to find out configure in IMG
    kapil

    Have you already customized Copy Control for your Service Order? If you want to add other transaction types the setting is necessary.
    The customizing path is shown as below.
    SPRO
    -> CRM
      -> Transactions
        -> Basic Settings
          -> Copying Control for Business Transactions
            -> Define Copying Control for Transaction Types
    Regards,
    Web

  • Credit block following availabilty check for released order

    Inisights are appreciated.
    We create a sales order for 100 items. We only have 50 in stock. The order gets blocked by credit since the customer is over limit. The order is released.
    Stock is increased to cover the order. An availability check is executed in the order to confirm the items. No other changes are made to the order. The credit value of the order is unchanged. However the order is blocked again in credit.
    This is a problem for us. Any suggestions on how to rectify this scenario are appreciated.

    Hello,
    As you said the customer is over limit, after you release the order and do avialability check again, the order will again get blocked because of credit check. The system is behaving correctly as per standard SAP.
    Check the credit limit of the customer and the credit availed in FD32. If you want to deliver the order, you will need to release the credit block again.
    Prase

  • Follow up Activities in CRM2007

    Hi Folks ,
    I m trying to creat a follow up activities for Lead , Opportunity - Activities is generating but im not able to open the Activity - The following is the Warning messages which is displayed.
    CRM_UI_FRAME/WorkAreaViewSet - Details for Diagnosis
    An exception occurred during request processing. This was handled centrally. It changed the program flow and the result of the request probably contains errors.
    Procedure
    Contact your system administrator.
    Procedure for System Administration
    Activate checkpoint group BSP_WD_EXCEPTION_DISPLAY. To do this, use transaction SAAB. If the error recurs, further details are displayed.
    I have maintained the steps as mentioned above - but also i could not able to view the activites . If i cross check in the GUI - I able to open & create the activities .
    If any body has faced same problem - Please provide your valueable inputs.
    Regards,
    Amrita

    Hi Amrita,
    you said you activated checkpoint group BSP_WD_EXCEPTION_DISPLAY for your user in TX SAAB.
    What is the extended error message that is shown on the UI now?
    As everything is working fine in SAP GUI it will most likely be an error related to the WebClient component.
    cheers Carsten

  • Set user status in CRM for incoming ERP order

    Hello,
    as SAP doesn't offer a user status replication between ERP and CRM (Note 905430) and we have the requirement that incoming ERP orders should get a specific user status, I was trying to implement the BADI CRM_DATAEXCHG_BADI.
    For data coming from the ERP system into CRM, the documentation of that above mentioned BADI points to implement the CRM_DATAEXCH_R3D_MBDOC_FILL method.
    I am experimenting for a week now how to fill the status segment correctly but unfortunately I don't get it to work. I didn't find any coding examples in SDN nor OSS so that now I am posting myself the question due to the lack of documention/information on that interface.
    Does anybody know what I have to fill in the structure BAD_STATUS_MESS which consists of the following fields:
    TR_STATUS
    BEF_IMG
    TASK
    SENDBITS
    CLIENT
    GUID
    ORDERADM_H_GUID
    STATUS
    USER_STAT_PROC
    ACTIVE
    PROCESS
    TXT04
    TXT30
    KIND
    OBJECT_TYPE
    My best guess was the following, but it didn't work:
    TR_STATUS.................
    BEF_IMG.......................0
    TASK............................0
    SENDBITS.....................FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
    CLIENT..........................
    GUID.............................
    ORDERADM_H_GUID...<GUID of the orderadm_h segment>
    STATUS.......................E0003
    USER_STAT_PROC.....ZCRMJHTA
    ACTIVE........................X
    PROCESS....................
    TXT04..........................
    TXT30..........................
    KIND............................
    OBJECT_TYPE............BUS2000115
    Any help will be highly appreciated.
    Many thanks in advance
    Victor

    TR_STATUS.................
    BEF_IMG.......................0
    TASK............................1
    SENDBITS.....................'FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF'
    CLIENT..........................SY-MANDT
    GUID................................<GUID of the orderadm_h segment>
    ORDERADM_H_GUID...<GUID of the orderadm_h segment>
    STATUS.......................E0003
    USER_STAT_PROC.....ZCRMJHTA
    ACTIVE........................X
    PROCESS....................
    TXT04.......................... Status Text
    TXT30.......................... Status Text
    KIND............................ 'A'
    OBJECT_TYPE............BUS2000115
    APPEND above record TO ct_bus_trans_msg-status.

  • !How to find out follow up activities created during creation of an Order??

    Hi Gurus,
    I want to find out the number of follow up activities created during creation of an Order??
    Is there any BAPI or Function Module which can detrmine the number of follow up activities after creation / saving an Order..
    Please Reply fast.
    Thanks
    Pranay

    Hi Pranav,
    I am confident this will solve your problem:
    <b>Step 1.</b>
    Enter the guid of the current order into function module
    CRM_DOC_FLOW_READ_DB.
    Code:
    DATA : t_doc_links TYPE crmt_doc_flow_db_wrkt,
               v_guid TYPE crmt_object_guid.
    v_guid = <guid of the order from table crmd_orderadm_h>
    CALL FUNCTION 'CRM_DOC_FLOW_READ_DB'
                  EXPORTING
                    iv_header_guid = v_guid
                  IMPORTING
                    et_doc_links   = t_doc_links
                  EXCEPTIONS
                    error_occurred = 1
                    OTHERS         = 2.
    <b>Step2.</b>
    Now loop through the returned table ie t_doc_links.
    Records which fulfill the following criteria are
    the follow up records.
      reltype    = 'VONA'
      objtype_b  = 'BUS2000126'
      objkey_b   =  v_temp
      roletype_b = 'NACHFOLGER'
      roletype_a = 'VORGAENGER'.
    <b>Step:3</b>
    Now Count the records which fulfill the above creteria.
    This count represent the number of followups created.
    <b>REWARD THE ANSWER WITH FULL 10 POINTS IF UR PROBLEM IS SOLVED.</b>
    thanks,
    ashish.

  • Request for proper order to follow for Oracle installation

    Hi,
    Previously, there was Oracle 11g R1 Enterprise edition was installed with custom database (win32_11gR1_database_1013) on non-clustered windows 2003 enterprise sp2 enviornment.
    We are going to make 2 nodes windows clustered enviornment and it would be active-passive mode
    We don't want Oracle RAC. We only want oracle 11 g R1 installed on both nodes of windows cluster and windows clustering featuring to look after active - passive mode. We only want single instance database.
    Currently we are discussing the keep the current Oracle database going and make the current node as node 1(active node) of the cluster. we will arrange another server and that would be node 2 (passive mode)
    I appreciate any help on what we are currently discussing is;
    The following steps are in chronological order
    1. We already have Oracle installed on node 1 and also oracle instance running on the node 1 (instance name is Alt_Prod)
    2. This database and oracle server files (i.e. control files and redo log files are stored in shared storage, not on local drives of node 1)
    3. We will make the Alt_Prod service offline from windows >> Administrative Tools >> services option (please ask if any other services to be made offline?)
    4. We will switch to node 2 of the cluster and will install Oracle without database (i.e. during installation we will select software only option).
    5. We will install oracle files either on local drive of node 2 or on shared storage drives
    6. Once installation complete, we will return back to node 1
    7. We will open the cluster administration option and will create generic service for Alt_Prod service inside the cluster administrator.
    8. Same point 7 will be followed on node 2
    Please add / amend where ever I’m wrong.
    Thanks in advance

    Basically a FailSafe environment just using only Windows Clustering. I've used that in the past with Oracle8i, hope it works out better for you on Oracle11gR1. I believe you will still need to license the 2nd node if you use it for more than 10 days in the year, if using this setup you are trying to avoid license costs.
    1. We already have Oracle installed on node 1 and also oracle instance running on the node 1 (instance name is Alt_Prod)
    2. This database and oracle server files (i.e. control files and redo log files are stored in shared storage, not on local drives of node 1)
    3. We will make the Alt_Prod service offline from windows >> Administrative Tools >> services option (please ask if any other services to be made offline?)
    Resp: All Oracle services on the node should be down, such as the listener. However this could be step 4 and hence reduce downtime.
    4. We will switch to node 2 of the cluster and will install Oracle without database (i.e. during installation we will select software only option).
    5. We will install oracle files either on local drive of node 2 or on shared storage drives
    Resp: I would install the Oracle software on local storage for each node so you can minimize downtime while patching (simply switch over to the other node with the updated software, and patch the other). You can still do this using shared storage for the Oracle Home via having two Oracle Homes on the shared storage (one primary the other backup), but that adds some more complexity.
    6. Once installation complete, we will return back to node 1
    Resp: You don't need this step, make step 3 into step 4 and reduce outages
    7. We will open the cluster administration option and will create generic service for Alt_Prod service inside the cluster administrator.
    Resp: Don't forget you will need to make the Oracle data disks, listener, and agent cluster monitored resources as well with dependencies.
    8. Same point 7 will be followed on node 2
    Resp: I'm not that familiar with Windows Clustering anymore, but I think you only need to do this once, and just failover for testing. Your cluster/server admin will know better.
    Hope this helps.

  • Profiles for ERP Sales Order

    Dear experts,
    I'm trying to configure our CRM 2007 system (upgraded from CRM 4.0) in order to call ERP Sales Order functions from the the new CRM WebClient UI. The ERP background system is ECC 5.0.
    Issue Description:
    In standard, we should have 2 default profiles for ERP Sales Orders: DEFAULT and SALESPRO but I can't see them. I think those entries will allow us to call some ERP Sales Order functions from CRM. When I try to recreate them manually, a short dump occurs.
    Steps for reconstruction:
    1. CRM > Interaction Center WebClient > Business Transaction > ERP Sales Order > Define Profiles for ERP Sales Order
    2. Select SALESPRO and double-click on Assign Document Types to ERP profiles in the left menu
    3. Select New Entries and select SALESPRO for the ERP Sales Order Profile
    4. Select a Document Type using the F4 search. Short dump occurs and can be analysed in the ECC system (SLS_LORD_GET_VALUES_AUART)
    Do you have any idea why this short dump occurs?
    Thanks in advance
    Stephanie

    Hi,
    see ERP Sales Transaction in CRM 2007 for details.
    They say that you can connect only a ECC6.0 to CRM, not any older versions.
    Unfortunately I cannot check this statement.
    Regards,
    Claudia

  • Inbox search for ERP sales order

    CRM 5.0 SP11
    Objective is to pull up an order from ECC in the ICWC inbox with the ability to change the order.
    in IMG t-code CRMC_IC_AUI_MAINCAT I changed the TA from ONEORDER to ERPORDER.
    In t-code CRMC_IC_AUI_MAP_PRI I copied the ONEORDER entries to ERPORDER.
    The TA is in my inbox profile.
    I can create an ERP order that is created in ECC (good), but when I do the inbox search the system times out.  
    The inbox search works with ONEORDER settings, but then I'm changing the order in CRM not ECC.

    Config settings were correct, needed oss note 1005642, the inbox search is very slow but working the performance issue with oss.
    But I was able to change an order in ICWC that updated ECC directly.

  • SAP Mobile Sales 2.0 delta load issue for Sales Orders

    Hello,
    we have used Mobile Sales 2.0 with a Windows app for a while now. Our current issue is that sales reps won't see any historical sales order data on their devices.
    Background
    Due customer requirements, we need to make small changes to customer master data attributes and reload all customers from ERP to CRM. Then we ran delta loads (MAS_PARTNER followed by all other objects) to DOE, in which virtually all 5000+ customer accounts were compared. The delta load ran for about 3 days (some performance bottleneck we haven't located yet).
    During the delta load, data on devices was inconsistent. Accounts were missing and all transaction data disappeared. After the delta loads, all accounts and contacts are OK, save for a few. Data from activities (appointments, tasks) have reappeared, as they should. Only sales orders won't reappear. The sales orders exist in the backend and belong to active accounts and sales reps.
    Settings and troubleshooting so far
    We don't have any limitations for sales orders in CRM Sales Mobile configuration.
    We've run delta loads for all objects in transaction SDOE_LOAD.
    MAS_CUSTOMIZATION etc seem fine.
    We've re-run initial load for sales orders from CRM.
    In the test system, we've even reinitialized the whole CDS database on DOE and on the devices, then re-ran the loads.
    Checked steps suggested in discussion
    SAP CRM 2.0 initial load issue
    Historical sales orders (those created before the master data reload) exist in the backend, but don't show up on the device.
    If I change one of those historical sales orders in the backend, it gets sent to the device.
    If I create a new sales order in the backend or on the device, it is saved and replicated just fine.
    To sum it up, it seems DOE is unable to identify the sales orders relevant for replication.

    First Doubt i got clarify by my self as we can go with Unwired Runtime option .
    But i still have doubt in :
    2. How can i Modifying the Main Menu for iOS.
    i am able to customize the same for windows using files SybaseCRM.Configuration.xml file.
    Same how can i do for iphone/ipad.

  • Talent Review Meeting - Follow-up activities

    Hello Experts,
    We are on ERP 6.0 - EHP6.
    I have created a talent review meeting, but when I go to do the Follow-up Activities, the button is disabled. There is a Badi to enable this button?
    After creating this talent review metting, the value of performance and Potential was saved in infotype 7409 and 7408, but in my opinion it should be also saved in the appraisal documents and it doesn´t happen.
    Could you help me?
    Thank You
    Clemilda

    Hi Luke,
    Yes, I configurated look the prints bellow.
    The status off apraissal is
    The botton UPDATE_POST_TRM I create, because in the sistem don´t existe.
    I configurate the button in Talent Management and Talent Development --> Assessment of Employees -> Employee Assessment with Flexible Appraisal Processes-> Define Data Retrieval for Flexible Appraisal Processes->Assign Status Change to Appraisal Templates.
    Best regards,
    Clemilda

  • Need to assign follow up activities to Service Quotations

    Hi All,
    can any one give me soluton on
    Need to assign follow up activities to Service Quotations (Create Service Quotation type "ZAV"...transaction code VA21. Need quotes to print out 90 days before service is due again in the following year.
    Thanks in advance.

    Have you already customized Copy Control for your Service Order? If you want to add other transaction types the setting is necessary.
    The customizing path is shown as below.
    SPRO
    -> CRM
      -> Transactions
        -> Basic Settings
          -> Copying Control for Business Transactions
            -> Define Copying Control for Transaction Types
    Regards,
    Web

  • Add ECC Custom Fields in CRM Web UI ERP Order item

    hi all,
    i have to Add ECC Custom Fields in CRM Web UI ERP Order item .
    I have :
    -  add the field on Web UI Screen.
    -  add the field on structure  TDS_item_COMV  and  TDS_item_COMC in ecc
    -  insert record for field on LORD_MAPPING table
    -  implemented badi BADI_LORD_DO_PA BADI_LORD_GET_INPUT_MODE.
    -  implemented method GET_I_S_STRUCT on crm with  :
    CASE COMPONENT.
        WHEN 'ZZSPOND'.
          RV_DISABLED = ABAP_False.
    endcase.
    - on method  do_prepare_output i have change value of fields with code :
    lr_loop = typed_context->erpadmini->collection_wrapper->get_first( ).
    WHILE lr_loop IS BOUND.
    posnr = lr_loop->get_property_as_string( iv_attr_name = 'POSNR' ).
    Does the current item has to be set for "Sponda Idraulica"?
    READ TABLE Z5CL_GSA_TOOL0001=>GT_ITEMS_SPOND INTO ls_spond
                                  WITH KEY posnr = posnr.
    IF sy-subrc = 0.
    lr_loop->set_property_as_string( iv_attr_name = 'ZZSPOND' iv_value = 'X' ).
    DATA : V_X TYPE STRING.
    V_X = lr_loop->get_property_as_string( iv_attr_name = 'ZZSPOND' ).
    ENDIF.
    lr_loop = typed_context->erpadmini->collection_wrapper->get_next( ).
    ENDWHILE.
    I can't change the field  value  because it is "not changeble"  .
    Can you help me ?
    Thanks in advance.

    Hi Celi,
    I have created some fields at header level of ERP Order, and the user is available to change them, replicating the information to SAP ECC (using interface LORD II). 
    All sales item information is treated using RFC ERP_LORD_GET_ITEM_MULTI, available in SAP ECC. 
    Please check the following point:
    If those structures below were expanded with your custom fields:
    SAP CRM:
    CRMST_L2_ITEM_COMV
    CRMST_L2_ITEM_COMC
    CRMTT_ADMINI_ERPIL
    CRMTT_ADMINI_I_ERPIL
    SAP ECC:
    TDS_RFC_ITEM_COMV
    TDS_RFC_ITEM_COMC
    Please check if for your scenario is necessary to implement the enhancement BADI_LORD_DO_PAI method ADD_SUPPLY_LIST. The code below works for header level.
      DATA: ls_supply TYPE tds_field_supply.
      IF iv_object_id EQ 'HEAD'.
        IF iv_module EQ 'VBAK_BEARBEITEN'.
          ls_supply-field = 'ZZCCINS'.
          APPEND ls_supply TO ct_supply.
          ls_supply-field = 'ZZCCNUM'.
          APPEND ls_supply TO ct_supply.
          ls_supply-field = 'ZZCCNAME'.
          APPEND ls_supply TO ct_supply.
          ls_supply-field = 'ZZAUNUM'.
          APPEND ls_supply TO ct_supply.
        ENDIF.
      ENDIF.
    I hope it helps!
    Kind Regards!

  • E-Commerce 5.0 for ERP and re-using a Quote

    We have an E-Commerce 5.0 for ERP environment that has been up and running for three years now. Everything is working great and we've made many custom enhancements through the years, but there is one that business is asking for that I've not been able to tackle yet, so I'd thought it best to get some advice.
    If you are familiar with E-Commerce 5.0 for ERP you should have noticed that a Quote can only be referenced (used) by an Order one time. After that has occured, the next time you access the Quote on the B2B site, the "Order Quote" button is greyed-out. This appears to be standard functionality. The main issue is the fact that there is no way to change the order quantity before you press the "Order Quote" button. It is not a text field.
    On the contrary, however, when creating a Quote within the ERP system (ECC6), one can reference (use) the Quote many times in the creation of Orders assuming you are not referencing the complete line quantity.
    What is going on? Where should I start looking on how to adjust the "web" quote to allow for this re-use? Could it be as simple as changing the qty field from a label to a text box, which would allow the customer to change the value?
    Any advice or ideas are welcome!
    Thanks
    Edited by: Bryan Fickle on Dec 3, 2009 9:21 AM

    If anyone knows how to get a user-entered custom value from the item level to a custom java class, please let me know.
    I'm still looking into how to extend the quote and allow for the re-use of it, if all the quantity on the line item has not been exhausted.
    I can easily add a custom field to the header of a .jsp and access that user entered value by coding against the requestParser.
    Example: Parameter xxx = requestParser.getParameter("customerHeaderParm");
    But, when I add a customer parameter to the item level of the .jsp, I cannot leverage the same to code and get at the user entered value. The value comes back as null.
    The two files I am working with are as follows: orderstatusdetail.jsp and Z_DocumentStatusOrderQuotAction, which is an extension of the standard class, DocumentStatusOrderQuotAction.
    I am working with the requestParser within the ActionForward isaPerform() method of Z_DocumentStatusOrderQuotAction. I need to get to those item level values BEFORE the order is created from the quotation.

Maybe you are looking for