Footer working on every page but index

i got the footer to work nicely except on my main page.. only the footer background shows but none of the divs:
http://toddheymandirector.com/
click on REEL, MORE, etc it shows there
THANKS!!
todd

<mailto:[email protected]?subject= TODDHEYMANDIRECTOR: REEL &body=Check This Out: http://toddheymandirector.com/REEL/ target="_new">
is invalid HTML.
mailto needs to be inside the href attribute inside the <a> tag.
Should be
<a href="mailto:[email protected]?subject= TODDHEYMANDIRECTOR: REEL&body=Check This Out: http://toddheymandirector.com/REEL/" target="_new">
Having said that, mailto is not a reliable method of getting feedback from a site because it relies on email software such as Outlook being installed locally. Many people use web-based email services such as Gmail.
Better to point them to a contact form on your website.

Similar Messages

HT4236 I've been using the iCloud Photo Stream with my PC for few months already. It work fine every time, but suddenly not work for today

I've been using the iCloud Photo Stream with my PC for few months already. It work fine every time, but suddenly not work for today

Hey lalitgupta,
Thanks for the question. The following article provides troubleshooting steps for Photo Stream:
iCloud: Photo Stream troubleshooting
http://support.apple.com/kb/TS3989
Thanks,
Matt M.

How to put a footer text in every page of the application

How to put footer text in every page of the application without putting it page by page.
Thanks.
Jen

Patick,
Thanks for your reply.
I still don't know how to do it.
1. Have a look at the documentation for Page 0.
There is no Page 0 in my application
2. You can add your custom stuff to your page templates.
Could you give me more detail on this?
Thanks,
Jen

Invoice Footer printing on every page of invoice instead of first page only

Hi,
I am working on an AR invoice report. I have a RTF template (template is 1 page only) and the output is PDF. The invoice has invoice header ( bill to , pay to ) and invoice line details. On the bottom of the first page of every invoice , I need to show the "customer address" and other details such as "total amt , customer no etc".. If the invoice line details overflow , only that information should be printed on the next page..
Right now , I have put the portion which needs to be displayed only on the first page in the "footer" section of the RTF. Due to footer , it gets repeated on every page of invoice..
I tried to get the current page number(<fo:page-number>) and compare it to 1 , but somehow its giving me syntax eorror...
Can someone please provide me directions on how to do this.. I can send the template and XML data if needed...
Thanks

Do you have any solution for this problem? I am facing the same for A/C Statement.
thanks

AJAX with PageMethods works in Application Pages but not with PageLayouts

Hi All,
I have created a class which contains public static method decorated with WebMethod and SciptMethod attributes
Public class BasePage : Microsoft.SharePoint.Publishing.PublishingLayoutPage
        [WebMethod(EnableSession = true)]
        [ScriptMethod(ResponseFormat = ResponseFormat.Json, UseHttpGet = false)]
        public static string HelloWorld()
            return "Hello world is working!";
Now I changed the <%Page ..> Tag of the PageLayout to inherit from the above class.
There is a ScriptManager in the master page with EnablePageMethods = true
I can see the Javascript methods are generated for HelloWorld(..) however the return result is "The Server Method HelloWorld failed." Error code is 500
However the exact same code when I use with a application page (_layouts) and change the Page tag to inherit from the same base class above - it works OK.
Both of them Page Layout and Application Page use the same master page - but one works and other does not.
Additional Information:
a) Am using Jquery and JqueryUI in the master page.
b) Site use Publishing Template
c) Variation is enabled on site
d) Site has both Anonymous and Windows NT authentication
The method Path for Application page shows as
/_layouts/test.aspx/HelloWorld
and for the page created using the Page layout is:
/en-us/Company/Pages/Default.aspx/HelloWorld.
Could anyone please advise what could be wrong where it does not work with Publishing Pages?
Would please appreciate ideas / thoughts.
Thanks,
Mohan
-- Mohan | My Blog

Are you sure that you are getting HTTP 500 error ?. Usually HTTP 500 error denotes service unavailable at the server side or at the server end point. What is the exact fiddler trace you are getting ?
If it is still HTTP 500, then one of the referenced components in the page layouts conflicts the ajax page methods call. Please let me know your findings
Please mark the replies as answers if they help or unmark if not.

Podcast - works on iTunes page but not when subscribed

Hi, I produced my podcast, submitted the feed through iTunes store and was validated. However, it happens so that people can listen to the podcast on iTunes page but not when they subscribe to it and try to download. error points to URL issues apparently. Help.

It works perfectly well for me. On subscribing I saw all three episodes and downloaded and played Episode 2 without any problems. The only explanations I can suggest are that either some of your subscribers are having some sort of technical issue at their end: or that your server is intermittently sulking and failing to respond to requests. Try playing the episode from this link a few times on spaced-out occasions and see whether you ever get a failure:
http://thecricketcouch.com/CouchTalk/CouchTalk-AntSims-SanaKazmi-062611.mp3

My font changes when I export to pdf, not on every page but only a few pages

I am using the font Helvetica, light in my iBook. It looks the same on every page in iBooks Author, but when I export it to PDF some of the pages look like they are written with font Helvetica bold. Can anyone suggest a fix? Thank you

A number of threads dealing with issue have been posted over the past two weeks or so, I suggest a search may help you and also check out the More Like This column on the right.

Internet works in every room but one...

Alright, here is the deal.
I have a WRT54G wireless router. In every room in the house, I can get on the internet. There is one room in the house that is the problem, and it is equally distanced from all the other room. The strangest thing is that I get full signal strength from the router, but no matter what computer or network device enters the room, it immediatley loses ability to connect to the internet.
Case in point... I will walk around the house with my laptop and the internet will work in every room except the one room. Again, I will have full strenght connection to the router, but I cannot connect to any websites. I can ping a site like google, it will find the ip address, but all request will time out.
Does anyone have ANY ideas?
Cheers, Jason
Message Edited by zirotti on 06-24-2007 06:47 PM

There are lots of factors that can effect wireless connections, and lots of different solutions. I suspect that there is something in the room that is "jamming" your signal, such as the 2.4 GHz devices listed below. To fix your problem:
First of all, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
Poor wireless connections are often caused by radio interference from other 2.4 GHz devices. This includes wireless phones, wireless baby monitors, Bluetooth (including Bluetooth game controllers), microwave ovens, wireless mice and keyboards, wireless speakers, and your neighbor's wireless network. Even some 5+ GHz phones also use the 2.4 Ghz band. Unplug these devices, and see if that corrects your problem.
In your router, try a different channel. There are 11 channels in the 2.4 GHz band. Usually channel 1, 6, or 11 works best. Check out your neighbors, and see what channel they are using. Because the channels overlap one another, try to stay at least +5 or -5 channels from your strongest neighbors. For example, if you have a strong neighbor on channel 9, try any channel 1 through 4.
Also, try to locate the router about 4 to 6 feet above the floor, in an open area. Do not locate it behind your monitor or near other computer equipment or speakers. The antenna should be vertical.
Hope this helps.

Includes work on one page, but not another.

Hello all.
I made a Spry naviation bar. It works on the orginal page, but when I put it on other pages, the menu bar is there, but the spry functionality is gone.
I've also had problems with my CSS stylesheet. I tried putting it in my header include, but it doesn't work on all my pages, but it does work on some. I've checked the links and they seem to be right as well
Any tips?
Gregg

As a guess, I would say that you are using doc relative paths inside your include files, and the parent page that does not work is in a different directory than those that do work. But like most questions here, without seeing your code we can only guess.

Cell repeats on every page but is overlapping other elements

Hi all,
in my report I have a free cell which schould appear on every page. I selected in cell-properties 'Repeat on every page' and cell repeats as expected.
Problem is that a table in the report starts on second page and onwards not before the bottom of the cell.
Positions of the report elements shouldn't be changed.
Thanks for your help,
Regards Sören

Hi Soren try Bellow
Create a Webi document using
Add a blank cell and put it on the top of the table.
Name the cell as Cell1.
Right click the table and select Format Table.
In Layout tab, set vertical relative position to 0 cm from the Bottom edge of cell1.
Repeat cell1 on each page and keep it blank.
Regards,
mahi

Form validation working on one page, but not the other....

Hope someone can help with this.
I have a page below with a load of contact forms which all work fine :
http://www.goodsafariguide.com/judges/judges.php
I've trued to recreate (admittedly mostly by saving as....) the same functionality here :
http://www.goodsafariguide.com/awardssite/judges/
They do work when fulled in correctly, but there's a glitch with the validation.
Basically when you fill in a form incorrectly, the page reloads, with the form's accordion closed. When you open it up, its showing the ugly looking error at the top of the form.
Any ideas what's causing it to act like this, as opposed to the way it works in the first link?
Thanks.

Iain71 wrote:
I've trued to recreate (admittedly mostly by saving as....) the same functionality here :
http://www.goodsafariguide.com/awardssite/judges/
They do work when fulled in correctly, but there's a glitch with the validation.
When looking at the source code I note that - unlike the first page - this one doesn´t contain any references to the ADDT form validation libraries ("../includes/tng/scripts/FormValidation.js" and "../includes/tng/scripts/FormValidation.js.php"), meaning that the validation can´t work.
Cheers,
Günter

Sample portlets work in Repository page, but can't be added to a page

Help,
Portal 3.0.9.8.2. Apps 11.5.7 DB 8.1.7.3.0
I installed the JPDK and could see all samples from the Portlet Repository page. Every one works fine, except the Lottery only shows preview, not the balls.
Then I try to add a portlet to a page. When I click on the name of the provider, I get the Windows hourglass forever and have to Cancel. It does not show any portlets.
The Apache error log shows:
[Tue Nov 26 14:40:27 2002] [debug] opm_tbl.c(1606): OPM:selected proc is:mod=JServ,grp=OACoreGroup,host=utility31.sagpnet,bindadd=localhost,port=16020,prot=0
[Tue Nov 26 14:40:31 2002] [debug] opm_tbl.c(1606): OPM:selected proc is:mod=JServ,grp=OACoreGroup,host=utility31.sagpnet,bindadd=localhost,port=16020,prot=0
[Tue Nov 26 14:40:37 2002] [warn] mod_plsql: /pls/test_portal30/PORTAL30.wwexp_api_engine.action had to be described for execution. Refer to the PL/SQL GateWay documentation on how to avoid this
[Tue Nov 26 14:40:43 2002] [debug] opm_tbl.c(1606): OPM:selected proc is:mod=JServ,grp=OACoreGroup,host=utility31.sagpnet,bindadd=localhost,port=16020,prot=0
[Tue Nov 26 14:40:43 2002] [debug] opm_tbl.c(1606): OPM:selected proc is:mod=JServ,grp=OACoreGroup,host=utility31.sagpnet,bindadd=localhost,port=16020,prot=0
TIA,
Gary

Hi megahertz456,
Seems to me that Source patching is not enabled. You should have 'V1' on the left of timeline highlighted. Check this:
https://forums.adobe.com/thread/1513966
Thanks,
Rameez

CNET links work on home page but sub pages require a refresh

Ever since the last update, when I'm reading the main page on CNET news site everything works fine. When I click on a link to an article a sub page comes up but none of the comment links on that page will work (for example the comment links and "like" links at the bottom of the page). The normal links to other articles seem to work.
If you want to comment or click a "like" link you have to refresh the page. This is FF 3.6.11 on Windows XP 32 bit.
This was not an issue until FF was last updated.

Although you are correct in that booting the browser in safe mode did correct the issue, I had no desire to start troubleshooting what addon or plugin was responsible for the issue. I did update Java.
Today there was another update for FF, and when this update was done the issue was corrected. Because of this, and since I really don't have time to be troubleshooting browser issues, I have disabled all the automatic updates in all the FF browsers in our shop, and at home. I am only going to update them if there is a significant change. I realize this may be a security issue, however I just cannot spend the time required to correct issues caused by browser updates. Again, I realize issues can be caused by the plugins not "following the rules" and not being updated but even so I cannot justify spending huge amounts of time correcting issues that would not happen if I did not update the browser.
Thanks for your time helping me with this problem. I will not be updating any more unless I read about a serious problem that has to be corrected.

Full screen plugin or add-on code works for every page except the start page ?? special containers on the new start page ?

Use Matt Brubecks Full screen plugin or just write a new Addon for Firefox for android (23.0)
Load add-on.
If you are on any tab other than the awesome screen.. it works and goes to full screen (although there are minor issues with container layout)
if you start the browser with no tabs selected.. i.e it falls back to start screen (awesome screen), then it does go to fullscren.. but leaves an ugly grayy bar on top where the awesome bar used to be..
Looks like the awesome screen is using a different container layout and has 2 different containers
Any ideas..
Basically I just need the browser to go to full screen without the gray bar showing up

Thanks allen222! I've been banging my head against this issue as well - glad to hear it's fixed in Mavericks - was planning to upgrade shortly.

Cloudfront signed url works with "setup page", but not local copy

I generated a signed url so I could do rtmp streaming through cloudfront from a S3 bucket.
When I put this url as the "src" of the player found here: http://osmf.org/dev/2.0gm/setup.html, I can see my video, however, it doesn't work on my local copy of Strobe Media Player.
I went and grabbed the latest available versions from source forge (2.0 of OSMF and 1.6 of SMP), compiled them, and tried to play the file, but it wouldn't work on my compiled copy.
My player works fine with normal videos, only when using signed urls from cloudfromt do I get ths error
It uses a signed url like this:
rtmp://s161ki0ys7euuz.cloudfront.net/cfx/st/vid_cdntest001?Signature=RSS0PV4RCq6lsF7gKE202 sHJw0lxCE9zwJbISVuovaBnARQFCVZ2e6SSejHXN4uIT5uotDBT8iYZVvfUC3rq0A571CWVETsnlJ4jhEir1JE5w-p jC-cx~CjxkcVQSj8EC07zozoNCypiBggLy0w2Id8TUxTuX9KrIDlN~BImwBjN1cnuZMpms9dpfuw-MLFefHtTDwfZZ Yh00LSUAEqA0BwqhA6NECHbrkaXQjUM7r5TRSP3ZH5uFIWhUWLMH3WWYLyz5bQab3FQxZhI4BhdFPJm6Z0m6HVVnuz eMqibMWDGybtoepjkTUYJqeTaYQUpIHrp1-0-dDVhhCx7BxCOlA__&Key-Pair-Id=APKAJSRQXYNPUENHF6HQ&Exp ires=1387398525
And it requires a flashvar "urlIncludesFMSApplicationInstance" to be set to true. The flashvar is set in my local copy of the player.
I set "verbose" to true, and I get "Playback failed. Failed to play(stream ID: 1)"
The AWS people were able to play the file on their debug player, so it isn't a problem with the video. It's just something about my copy of the player or the environment I'm on.

I'm initlaizing the player using swfObject like this:
$(document).ready(function(){
        callPlayer("rtmp://s161ki0ys7euuz.cloudfront.net/cfx/st/vid_cdntest001?Signature=EYvGzU2I4CRLE4h8pD8fec3A6fwfIqadzuAtVBQcsDeh0zU9rexKJqq-5GVNG~PdNlV~nbdSlUl4FAJ6rCuOTAh7BrXkieg26z4y3uMgzLm3I3p8GSjTyUBe5rIbZhnxUulSFfHoOWFDV-keORil3~zG91OVDKxvsbIrZv6-IsYTJQzYA7w6R2jy6SiJEJwfqNvD5xdiv2w87GuR472kELQ79yvI6twgeDnZOkN~w9khQSVLcqqmAkkTHQxxkBR8hs954VaUEAKZO~ejwZ3ju8xTUAeuuQu3y06r6SHNGwhLdQh00qV1PUHSMdPdHp3SzZdCxwAepV6xUx2~TR2idw__&Key-Pair-Id=APKAJSRQXYNPUENHF6HQ&Expires=1387466710");
    function callPlayer(x){
    $("#PlayerHolder").html("<span id='PlayerDiv'></span>");
        var flashvars = {};
        flashvars.verbose=true;
        flashvars.src=x;
        var parameters = {};
        parameters.urlIncludesFMSApplicationInstance=true;
        var attributes = {};
        attributes.name="player";
        attributes.id="player";
        swfobject.embedSWF("StrobeMediaPlayback.swf?ID="+Math.random()*100,"PlayerDiv","470","320","11.2","scripts/expressInstall.swf", flashvars, parameters, attributes);

Footer working on every page but index

Similar Messages

Maybe you are looking for