For iTunes Match, how come some songs "match" on an album and other songs on the same album "upload" without matching?
For iTunes Match, how come some songs "match" on an album and other songs on the same album "upload" without matching? All songs are available on iTunes. I don't get it! Any way to manually match songs that iTunes apparently can't match? I have hundreds in this unmatched state.
gsl wrote:
Shazam has NO problem determining what these songs are. Maybe Apple needs to consider licensing their technology as it seems MUCH more accurate than what they are doing.
You aren't comparing like with like.
The main task that Shazam has is to identify the name or a track and the artist. I believe that it suggests the album as well, but if it gets that wrong then it doesn't really matter too much.
With iTunes Match, getting the album (i.e. identifying which version it is) is much more important. If it gets that wrong then it breaks up the flow of an album. This makes the task that match has very much harder.
In fact, there is a strong argument to say that currently the problem iTunes has is that it is matching too many songs, resulting in matches from different albums.
I'm sure that match is not struggling to identify whether it has a song or not, but whether it has the correct version of a song. When you introduce different masterings into the process then, depending on the thresholds set, it is probably correct in concluding that it hasn't got a particular version, even if you think it has.
The solution would appear to me to be a tweaking of the matching thresholds along with the ability to force an upload, but we just don't know what restrictions they have (remember that if Shazam gets it wrong the it doesn't present you with a copy of a new track that you didn't have previously). It is almost certainly not just a case of improving their technology.
Similar Messages
-
How to export an album and keep images in the same order in elements 11 mac
I made an album of my trip to Australia (lots of pictures) and changed the order of the images (not the same as shooting order) and when I export the images in the album to a folder or memorystick, the images are copied to that place but I lost the album order of the images.
How can I prevent that, without having to renumber al 500 images separatly?
Gr JosThanks for the tip, Michel
It worked like a charm…
cheers Jos
Op 28 okt. 2013, om 18:49 heeft MichelBParis <[email protected]> het volgende geschreven:
Re: How to export an album and keep images in the same order in elements 11 mac
created by MichelBParis in Photoshop Elements - View the full discussion
JosU a écrit:
I made an album of my trip to Australia (lots of pictures) and changed the order of the images (not the same as shooting order) and when I export the images in the album to a folder or memorystick, the images are copied to that place but I lost the album order of the images.
How can I prevent that, without having to renumber al 500 images separatly?
Gr Jos
The order in album is only kept in the organizer database, so the only way not to lose that order is to rename files.
If you are using the 'export' function, select your album in custom order, select all photos and in the dialog, choose to rename with a common base name.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5794538#5794538
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5794538#5794538
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5794538#5794538. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
How can i get my iPhone, ipad mini and mac to show the same contacts calendar and notes
how can i get my iPhone, ipad mini and mac to show the same contacts calendar and notes
Plug the phone and iPad into your computer and sync them.
-
I am able to access some directories on the website without any problems while I get the "Firefox has detected that the server is redirecting the request for this address in a way that will never complete." error for other directories of the same site.
== URL of affected sites ==
http://www.safelistgrande.comSuddenly from yesterday I am getting this error while trying to opening gmail
-
Tracks from imported cds are appearing as though they are from separate albums.Particularly if they are compilations.
You can use iTunes to select the multiple tracks of the same album, and give them the same Album Name from the info window.
If that does not solve your problem, be sure to check if your songs have different sorting albums. If so, change or delete the text in the sorted albums text field. -
Itunes charged me for the uncensored and censored version of the same album
It said purchasing album I confirmed but when I left the room my laptop was closed. It didn't ending up downloading at all so i re downloaded the album or so I thought. Itunes dose not say if the album is explit or not when u buy it so it turns out it bought the clean version and the explit because I thought I hit the explit album both times. Any one know how I can get my $13 back ? thank you
Welcome to the Apple Community.
Generally speakling, Apple's policy is that all sales are final. If you wish to try appealing to them, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History. -
Sorry, but I am still rather new to LabVIEW and NI MAX. I connected both devices (a linear probe and an angular encoder) to my NI 9401 chassis. I figured out how to create tasks for each and get continous samples readings from each. When trying to run both in LabVIEW, I get the error saying that I cannot run multiple tasks at once. It suggests the Control Task VI, but I did not see any help in that. Any advice?
Here is some general information, whatever it is worth: Both encoders are operating off of the same clock source, PFI4, which to my knowledge corresponds to CTR 1 A, where the angular encoder's A signal is wired in. The linear's physical channel is ctr0 and the angular's is ctr1.
Thank you very much for taking the time to look at this and help me out!
Solved!
Go to Solution.So if I go the Edge Counter route, is there any way for the task to figure out direction of the encoders? It looks like my options are always counting up or always counting down whenever the encoder is read... For my application, I need it to read when the linear encoder goes in and when it goes out... Am I doing something incorrectly with it?
I am using a probe to measure the contour of a part, and using a motor to spin the part, with one encoder measuring the angle of the motor and the other measuring the displacement of the probe.
Also I am still not seeing a way to simultaneously read both devices in NI MAX... I cannot use two counter inputs from the same device at once in the same task it seems. -
[SOLVED] How to use timidity++ and other programs at the same time?
I have installed timidity following arch wiki instructions - I have soundfont, and I start it in /etc/rc.conf
It works properly with tuxguitar (and tuxguitar-alsa) or kmid, but I cannot play MIDI and - for example - oggs in amarok at the same time.
I suspect that the problem is that timidity doesn't use dmix alsa plugin I have made in my ~/.asoundrc.
The question is: how to tell timidity to use my dmix plugin?
Last edited by senjin (2007-11-19 19:53:50)but they don't define "default" there, but "!default"...
anyway, I have already both "default" and "!default" defined exactly the same way:
pcm.!default
type plug
slave.pcm "dmixer"
pcm.default
type plug
slave.pcm "dmixer"
pcm.dmixer
type dmix
ipc_key 1024
slave
pcm "hw:0,0"
format "S32_LE"
channels 2
period_time 0
period_size 1024
buffer_size 4096
rate 44100
bindings
0 0
1 1
ctl.dmixer
type hw
card 0
pcm.w_y_h
type hw
card 0
device 0
pcm.what_you_hear
type plug
ttable.0.10 1 # digital mix left
ttable.1.11 1 # digital mix right
slave.pcm w_y_h
pcm.skype
type asym
playback.pcm "dmixer"
capture.pcm "skype_input"
pcm.skype_input
type dsnoop
ipc_key 2048
slave
pcm "hw:0,0"
period_time 0
buffer_time 0
period_size 1024
buffer_size 8192
rate 44100
and it doesn't work!
Last edited by senjin (2007-11-18 17:49:21) -
How come some of my "top sites" in safari won't show the pages?
I had to restore my system and now some of the TOP SITES in safari wont show the pages and only show the black page. If I click on the black page, it loads the page, but it stays black in top sites. Any help would be nice thanks
It is probably just an artifact of restoring. Once you type their names into the url bar again, the sites and their last images will show up again in Top Sites.
I use an obscure method that clears all caches on every logout, and my top sites always comes up all black when I log in. It is not really a defect, it just does not have an old page-image to show you until you visit that site again. -
How come some purchases dont appear on icloud and appear under purchase history?
i purchased music in the past and they do not appear in iCloud but appear in purchase history
asuming you are talking about the app store try signing into your account using your apple id into the app store.
-
How do i remove MYWEBSEARCH from my PC and block it at the same time
some how i have downloaded something that brought MYWEBSEARCH page and can not find out how to
remove it permanently and also block.Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us! -
How can we have a column having text and radio button in the same line?
Hi,
I have a column which needs to have data with a radio button. Was able to achieve this by using <trh:tableLayout>. But when i select the radio button it shifts to the next line. Want to stop this behavior of radio button of shifting to the next line. This column also includes a hyperlink.So the text and hyperlink are made visible invisible based on radio button action.
Adding one more doubt. Can a particular columns horizontalgrid can be made invisible?
Any help would be appreciated.
sample code:
<trh:cellFormat id="cf8" halign="start">
<af:activeOutputText value="#{row.Actions}" id="aot2"/>
<af:goLink text="#{row.Actions}" id="gl1"
clientComponent="true" visible="false"
targetFrame="_blank" destination="http:// + #{row.BUTTON_URL}">
</af:goLink>
<af:selectBooleanRadio text="" id="sbr1">
<af:clientListener method="selectCheckBox" type="click"/>
</af:selectBooleanRadio>
</trh:cellFormat>
Thanks,
NitaRemove the <trh:> components. Put the other components as direct children of the PanelGroupLayout:
<af:column id="c2" headerText="Actions">
<af:panelGroupLayout id="pgl6" layout="horizontal">
<af:activeOutputText value="#{row.Actions}" id="aot2"/>
<af:goLink text="#{row.Actions}" id="gl1"
clientComponent="true" visible="false"
targetFrame="_blank" destination="http:// + #{row.BUTTON_URL}">
</af:goLink>
<af:selectBooleanRadio text="" id="sbr1">
<af:clientListener method="selectCheckBox" type="click"/>
</af:selectBooleanRadio>
</af:panelGroupLayout>
</af:column>If you need to add some horizontan space between the components, you can put <af:spacer>(s) between the components.
Dimitar -
Itunes two versions of the same album?
Hello,
I have two versions, high res audio and CD quality, of the same album of an artist located in two folders "Album Title" and "Album Title HD".
By adding the two folders to the iTunes mediathek, all tracks are merged under "Album Title" in iTunes. Do I have to manipulate the meta data to avoid this behavior in iTunes? Interestingly the views on the Mac and via iOS Remote App are different:
Mac:
Track 1
Track 1 HD
Track 2
Track 2 HD
etc.
Rmote App:
Track 1
Track 2
Track Last
Track 1 HD
Track 2 HD
I disabled the automatic handling option for iTunes import. So still two folders in the iTunes music folder exist.
Any ideas?
AndreasIf you want them to appear as separate albums you will have to change the metadata for one of the albums. There are many ways to do this and which one you use will depends upon your preferences.
You can make it obvious by doing something such as adding a descriptor to the album name e.g., Album Name [CD quality]
You can "hide". If you do not normally use the album artist field and you add an album artist to that field for one of the versions it will cause that to sort separately. Similarly if you add a number to the disc number field that should normally get it to display separately.
Alternatively you can come up with a smart playlist to sort according to kind. -
Sorting Songs From the Same Album but Different Artists
I have the Warped Tour 2014 Compilation CD. I want all of the songs on this album to be grouped into the same album. I know I could do this by giving them the same album artist, but here's my problem: When I do that, it separates songs by an artist from other songs by the same artist. One of the artists on the album is Less Than Jake. I have other music by Less Than Jake, and I want this song to be grouped with their other songs, which doesn't work if I change the album artist. I want the song to stay in the compilation album but also grouped with other songs by the same artist. How can I do this?
Stick with using the correct Album Artist for the album.
Visit the Songs > Column Browser view and untick View > Column Browser > Use Album Artists. This should allow all of the Less Than Jake songs to be listed under the artist.
See Grouping tracks into albums for more.
tt2 -
Under the iCloud portion of settings on my iPhone, I have always gotten the message "account not verified". The email matches and is in fact the same for my accounts on iCloud and iTunes. Has anyone had this problem, and how have they resolved it?
Hello megalina23
You need to verify the email address associated with the Apple ID. Check out the article below on how to do this.
Associating and verifying email addresses with your Apple ID
http://support.apple.com/kb/HE68
Thanks for using Apple Support Communities.
Regards,
-Norm G.
Maybe you are looking for
-
Hi, I've troll this forum and have not been able to locate my specific problem. I've tried importing my Mail 1.3.11 (v622/624) from 10.3.9 10.4.10 Mail 2.1.1 (752.3) using a Firewire transfer, Network transfer, as well as the Import Mailboxes... func
-
I purchased a used iPad 1st. Generation that has an iOS 5.1.1 Can I upgrade to iOS 7 ? I have tried to do it but when I go to Settings/General/ Software update, it comes back with : iOS 5.1.1 Your software is up to date therefore I have not
-
I have an ipod touch 4th gen i installed recenr upgrade to this ipod, and all of my music ha dissapeared I can still find my music collection in my ipad 1st gen and it is stall on my ipod 3rd gen but cannot get it back onlater ipod or synk with my o
-
hi, can any body explain me what is rule+ and what is rule- in transformations and what is the use?. i have tried adding the object and its populating to the target . but what is the use of it? regards, manju
-
I have an iBook running 10.4.7 and a Dell running XP Pro on my airport network, as well as an HP 2110 printer. Things had been running OK, but suddenly I couldn't print to the HP. I tried deleting the printers and re-installing, to no avail. The only