For loop format
Ok so everybody knows the standard for loop format of:
for (initialization; termination; increment)
but what does it mean when you add a 4th expression to the mix?
this is from the Java Tutorial 4th Edition pg. 250
for (int i = 0; n = elements.length; i < n; i++)
Can somebody explain this please?
Perhaps you're thinking of something like this?
for (int ix = 0, jx = 10; ix < 100; ix++,
jx++)
ok good - well what does this mean?oh wait - this just means initialize 2 things before starting the loop, right? I get it now.
Similar Messages
-
Multiplication Table with Two Nested For Loops
I am trying to code a multiplication table in which the user enters the number of rows between 2 and 10 and enters the number of columns from 2 to 10. This must be in nested for loop format somewhat like this:
rows has been assigned the input variable for rows and columns is the name for input value for columns
for (int i = 1; i <=rows; i++)
for (int j = 1; j <=columns; j++)
i * j
i can't figure out how to get it to print out in table format or if the calculation coding is correct. can anyone help me please?
it should look like this for rows is 4 and columns is 7
1 2 3 4 5 6 7
2 4 6 8 10 12 14
3 6 9 12 15 18 21
4 8 12 16 20 24 28
Edited by: hatecodingsomuch on Feb 22, 2009 8:15 PMhatecodingsomuch wrote:
I refuse to ask for help from people who are acting like they are all-knowing and unwilling to help someone, considering I am asking for help...to learn. Obviously I am not understanding java very well and I don't need to be ridiculed like this from members who are supposed to help "NEW TO JAVA" individuals. Get off your high horse or get off the website. I will never use this again.Good luck with that.
You do seem to be yet another "do my homework for me" type of flunkie. I predict you'll soon have an epiphany that software development really isn't for you.
I hope you know how to say "Do you want fries with that, sir?" better than the next guy so you can edge him out. -
Modifying user input in for loop
Hello,
I am making a program in order to control two velmex motors. As part of my program, I have two nested for loops. The inner for loop formats a user specified input in ascii commands and the outer loop tells the program how many times to run that specific inner loop pattern.
I want to modify the program so that two motors work together in a "snake pattern". In other words, the first outer loop should take the original user input, but then the second time the outer loop runs the direction of one of the motors (all of the associated values with one motor are stored in an individual cluster and these clusters are sorted and placed into an array), should be reveresed by mulltiplying the step size * -1. The third time the outer loop runs, the direction of one the motors (the same motor) should be reveresed again so it is moving in its original direction etc.
Hope that made sense...
I have attached my code for clarification - any help would be really appreciated
Thanks,
Mridumnanda98 wrote:
Hi RavensFan,
Do you mean I need to wire a constant into the VISA read?
Isn't that exactly what I said?
Also I am making progess, but now when I run the program I get the error "timeout expired before the operation completed". From what I understand, the timeout would only expire if it is not picking up on the termination character, which I have put in.. Can you look at my code maybe and tell me what may be the problem?
It looks like you've set the termination character to be a carriage retrrun (decimal 13) just fine. So if you are getting a timeout error, that means you are either not sending the commands correctly and the device is not responding, or the termination character is not actually a carriage return like you said.
Do you have any software that the vendor of the device might have supplied that can prove to you that it is communicating correctly? Is any data returned in the string indicators when it finally times out?
Thanks in advance,
Mridu
And why do you still have the VISA Close inside the loop closing the port on each iteration? It belongs after the while loop. -
Hi
I am working on some project and am encountring for loop in some strange format. Can anyway help me with understanding this format of for loop.
this is something like:
for(Case q: cases)
can you simplify of map this to simple format of loop.
ThanksThis was introduced in JDK 1.5. Read the release notes for that to find out about this loop structure.
Basically it's a way to quickly loop, using iterators implicitly if the thing to the right of the colon is a Collection. -
For Loop and Void Method Questions
Question 1: How would I write a for loop that repeats the according to the number entered, to prompt the user to enter a number (double) between 1 and 100. If the number is outside this range it is not accepted.
Question: 2 Also how would I write a for loop to do sum and find the average of the array numbers in a seperate void method( does not return anything to the main method)?
Question: 3 (first code snippet) With my for loop that is used to process each number in the array and square it and cube it and display the results to 2 decimal places. How do I make it so say I want the array to allow me to enter 2 numbers (so I enter 2 numbers) then it asks me to enter a number between 1 -100 (which will prompt 2 times) that it shows me the results for the entered numbers between 1-100 after one another instead of number then result number then result like I how it now.
for (int index = 0; index < howNum; index++) // process each number in the array
enterYourNumbers = JOptionPane.showInputDialog
("Enter a number between 1 and 100");
numArray = new double[howNum];
try
numArray[index] = Double.parseDouble(enterYourNumbers);
catch (NumberFormatException e)
enterYourNumbers = JOptionPane.showInputDialog
("Enter a number between 1 and 100");
DecimalFormat fmt = new DecimalFormat ("###,###.00");
JOptionPane.showMessageDialog(null, enterYourNumbers + " " + "squared is " + fmt.format(calcSquare(numArray[index]))
+ "\n" + enterYourNumbers + " " + "cubed is " + fmt.format(calcCube(numArray[index])));
wantToContinue = JOptionPane.showInputDialog ("Do you want to continue(y/n)? ");
while (wantToContinue.equalsIgnoreCase("y"));
import javax.swing.*;
import java.text.DecimalFormat;
public class Array
public static void main(String[] args)
int howNum = 0;
int whichNum = 0;
double[] numArray;
boolean invalidInput = true;
String howManyNumbers, enterYourNumbers, wantToContinue;
do // repeat program while "y"
do // repeat if invalid input
howManyNumbers = JOptionPane.showInputDialog
("How many numbers do you want to enter");
try
howNum = Integer.parseInt(howManyNumbers);
invalidInput = false;
catch (NumberFormatException e )
howManyNumbers = JOptionPane.showInputDialog
("How many numbers do you want to enter");
while (invalidInput);
for (int index = 0; index < howNum; index++) // process each number in the array
enterYourNumbers = JOptionPane.showInputDialog
("Enter a number between 1 and 100");
numArray = new double[howNum];
try
numArray[index] = Double.parseDouble(enterYourNumbers);
catch (NumberFormatException e)
enterYourNumbers = JOptionPane.showInputDialog
("Enter a number between 1 and 100");
DecimalFormat fmt = new DecimalFormat ("###,###.00");
JOptionPane.showMessageDialog(null, enterYourNumbers + " " + "squared is " + fmt.format(calcSquare(numArray[index]))
+ "\n" + enterYourNumbers + " " + "cubed is " + fmt.format(calcCube(numArray[index])));
wantToContinue = JOptionPane.showInputDialog ("Do you want to continue(y/n)? ");
while (wantToContinue.equalsIgnoreCase("y"));
public static double calcSquare(double yourNumberSquared)
return yourNumberSquared * yourNumberSquared;
public static double calcCube(double yourNumberCubed)
return yourNumberCubed * yourNumberCubed * yourNumberCubed;
public static void calcAverage(double yourNumberAverage)
}DeafBox wrote:
Question 1: How would I write a for loop that repeats the according to the number entered, to prompt the user to enter a number (double) between 1 and 100. If the number is outside this range it is not accepted. Use a while loop instead.
Question: 2 Also how would I write a for loop to do sum and find the average of the array numbers in a seperate void method( does not return anything to the main method)? Why would you want to use 2 methods. Use the loop to sum the numbers. Then after the loop a single line of code calculates the average.
Question: 3 (first code snippet) With my for loop that is used to process each number in the array and square it and cube it and display the results to 2 decimal places. How do I make it so say I want the array to allow me to enter 2 numbers (so I enter 2 numbers) then it asks me to enter a number between 1 -100 (which will prompt 2 times) that it shows me the results for the entered numbers between 1-100 after one another instead of number then result number then result like I how it now. If I understand you correctly, use 2 loops. One gathers user inputs and stores them in an array/List. The second loop iterates over the array/List and does calculations. -
"Only files in Apple Loops format will be shown in the loop browser".
I recorded a Drum loop from my Korg m50 workstation into logic pro 9.
After recording i tried to import that loop into Apples loop library. After doing so i get this message.."Only files in Apple Loops format will be shown in the loop browser."
What do i do?
Please help.
Thanks
RohanI've recently gotten this error when I try to drag an audio file into the loops library (to create an apple loop.)
Comes along with Result Code=-43.
I'm trying to quantize some rhythmic loops using flex, then turn them into apple loops for the library.
My process:
Take original audio.
Flex it using slice mode.
Bounce in place.
Drag new region into Loops browser.
Errors ensue. -
Adding loops and loops format question
Hi, i've been facing difficulties adding loops into my GB. My problem is: "Loops do not appear in my loop browser nor the loop list from the silver loop bar above the browser".
Yes, forgive me for asking this repeated question but after checking the help tutorial, my personal GB guide books, and even HangTime's FAQ, sadly, i still dont find any answers.
Generally, the procedure is pretty simple from all the sources i've read. Simply drag the folder or loops into the browser and thats DONE right? I did exactly what it said but sigh...maybe there's something wrong with my Macbook?
For your information, all the loops that i've been adding are loops from CDs coupled with FutureMusic and ComputerMusic magazines, so i believe the sources are pretty reliable i hope.
As i was struggling to add the loops, this msg popped up for the first time; "Loops that are not in Apple format will not be added into GB"
So, is the loop format the main cause of my problem?
if yes, is there any way to convert the format? what is the procedure?
ps: My current status is, some loops i added are in my browser while some dont although they exist in User/Library/Audio/AppleLoops/UserLoops.
Thank you in advance.
PeaceSo, is the loop format the main cause of my problem?
likely.
if yes, is there any way to convert the format? what is the procedure?
apple's loop utility:
http://www.bulletsandbones.com/GB/GBFAQ.html#looputility
also note:
http://www.bulletsandbones.com/GB/GBFAQ.html#missingloops -
Replace the following open/fetch/close statements with a cursor FOR loop
Hi anyone could you please help me,
I would like to replace the following open/fetch/close statements with a cursor FOR loop.
Codes are:
CREATE OR REPLACE PROCEDURE COMOES.orchid_shipment_interface IS
-- get the com shipment header records
CURSOR c_com_shphdr ( p_dwn_end_dt DATE ) IS
SELECT custno client_id
, plheadno plheadno
, DECODE(carr_no,'FEDX',lading_no,'UPS',lading_no,carrier_pro_no) tracking_no
, carr_no||'/'||carr_method carrier_id
, plantid plant_id
, carr_no
, lading_no
, del_custaddr ship_to_id
, ol_type cfm_order_type
, del_custno
, shipterm freight_terms
, del_custattn attn_line
, custaddr
FROM com_plhead@com_pricing.world
WHERE status = '9'
AND (mod_dat) > p_dwn_end_dt;
-- get the com shipment address records
CURSOR c_com_shpadr (p_custaddr VARCHAR2) IS
SELECT name1 addr_name
, street1 addr_line1
, street2 addr_line2
, city city
, state state_cd
, zip zip
, country country_cd
, phone work_phone
, email email1
FROM com_address@com_pricing.world
WHERE addr_id = p_custaddr;
-- get the com shipment detail records
CURSOR c_com_shpdtl ( p_plheadno NUMBER) IS
SELECT pll.plheadno pllheadno
, pll.pllineno ord_line_no
, pll.ol_no erp_line_no
, pll.ol_segno
, pll.fg_id sku
, pll.qty_shipped ship_qty
, pll.ordno erp_ord_no
FROM com_plline@com_pricing.world pll
WHERE pll.plheadno = p_plheadno
AND NOT EXISTS (SELECT '1'
FROM com_pkg_int_interface@com_pricing.world cpi
WHERE pll.ordno = cpi.ordno
AND pll.ol_no = cpi.ol_no);
-- type declaration
-- type declaration of com table.
TYPE t_com_shphdr IS TABLE OF c_com_shphdr%ROWTYPE INDEX BY BINARY_INTEGER;
TYPE t_orchid_shphdr IS TABLE OF orchid_shipment_hdr_intf%ROWTYPE INDEX BY BINARY_INTEGER;
TYPE t_com_shpadr IS TABLE OF c_com_shpadr%ROWTYPE INDEX BY BINARY_INTEGER;
TYPE t_orchid_shpadr IS TABLE OF orchid_shipment_address_intf%ROWTYPE INDEX BY BINARY_INTEGER;
TYPE t_com_shpdtl IS TABLE OF c_com_shpdtl%ROWTYPE INDEX BY BINARY_INTEGER;
TYPE t_orchid_shpdtl IS TABLE OF orchid_shipment_dtl_intf%ROWTYPE INDEX BY BINARY_INTEGER;
lv_company_code com_customer.business_unit%TYPE;
lv_erp_ord_no com_plline.ordno%TYPE;
lv_actual_ship_date com_plline.confirm_date%TYPE;
lv_po_no com_oline.po_no%TYPE;
lv_ord_date com_oline.entrydate%TYPE;
lv_hdr_batch_ctrl_no download_batch_info.batch_ctrl_no%TYPE;
lv_adr_batch_ctrl_no download_batch_info.batch_ctrl_no%TYPE;
lv_dtl_batch_ctrl_no download_batch_info.batch_ctrl_no%TYPE;
lv_sku_desc com_salesitem.title%TYPE;
lv_ord_qty com_oldelseg.qty%TYPE;
lr_com_shphdr t_com_shphdr;
lr_orchid_shphdr t_orchid_shphdr;
lr_com_shpadr t_com_shpadr;
lr_orchid_shpadr t_orchid_shpadr;
lr_com_shpdtl t_com_shpdtl;
lr_orchid_shpdtl t_orchid_shpdtl;
-- variable declaration
ln_shphdr_seq NUMBER(10):= 0;
ln_shpadr_seg NUMBER(10):= 0;
ln_shpdtl_seq NUMBER(10):= 0;
cnt NUMBER(10):= 0;
cnt1 NUMBER(10):= 0;
ld_hdr_dwn_end_dt download_batch_info.download_end_tstamp%TYPE;
lc_hdr_dwn_status download_batch_info.dwn_status%TYPE;
ld_hdr_download_end_tstamp DATE;
ln_hdr_running_seq NUMBER(10) := 0;
ld_adr_dwn_end_dt download_batch_info.download_end_tstamp%TYPE;
lc_adr_dwn_status download_batch_info.dwn_status%TYPE;
ld_adr_download_end_tstamp DATE;
ln_adr_running_seg NUMBER(10) := 0;
ld_dtl_dwn_end_dt download_batch_info.download_end_tstamp%TYPE;
lc_dtl_dwn_status download_batch_info.dwn_status%TYPE;
ld_dtl_download_end_tstamp DATE;
ln_dtl_running_seq NUMBER(10) := 0;
BEGIN
-- get the batch control number details from batch information table for shipment header
BEGIN
SELECT batch_ctrl_no
, NVL(download_end_tstamp,TO_DATE('01/01/1980','MM/DD/YYYY'))
, dwn_status
INTO lv_hdr_batch_ctrl_no
, ld_hdr_dwn_end_dt
, lc_hdr_dwn_status
FROM comoes.download_batch_info
WHERE download_id = 'ORCHID_SHIPMENT_HDR_INTF';
EXCEPTION
WHEN NO_DATA_FOUND THEN
DBMS_OUTPUT.PUT_LINE (' No Data Found for ORCHID_SHIPMENT_HDR_INTF in Download Batch Info table...!!!');
RAISE;
WHEN TOO_MANY_ROWS THEN
DBMS_OUTPUT.PUT_LINE (' Too Many Rows found for ORCHID_SHIPMENT_HDR_INTF in Download Batch Info table...!!!');
RAISE;
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE (' Following error occured while getting batch control number for ORCHID_SHIPMENT_HDR_INTF in Download Batch Info table...!!!'||SQLERRM);
RAISE;
END;
-- get the batch control number details from batch information table for shipment address
BEGIN
SELECT batch_ctrl_no
, NVL(download_end_tstamp,TO_DATE('01/01/1980','MM/DD/YYYY'))
, dwn_status
INTO lv_adr_batch_ctrl_no
, ld_adr_dwn_end_dt
, lc_adr_dwn_status
FROM comoes.download_batch_info
WHERE download_id = 'ORCHID_SHIPMENT_ADDRESS_INTF';
EXCEPTION
WHEN NO_DATA_FOUND THEN
DBMS_OUTPUT.PUT_LINE (' No Data Found for ORCHID_SHIPMENT_ADDRESS_INTF in Download Batch Info table...!!!');
RAISE;
WHEN TOO_MANY_ROWS THEN
DBMS_OUTPUT.PUT_LINE (' Too Many Rows found for ORCHID_SHIPMENT_ADDRESS_INTF in Download Batch Info table...!!!');
RAISE;
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE (' Following error occured while getting batch control number for ORCHID_SHIPMENT_ADDRESS_INTF in Download Batch Info table...!!!'||SQLERRM);
RAISE;
END;
-- get the batch control number details from batch information table for shipment details
BEGIN
SELECT batch_ctrl_no
, NVL(download_end_tstamp,TO_DATE('01/01/1980','MM/DD/YYYY'))
, dwn_status
INTO lv_dtl_batch_ctrl_no
, ld_dtl_dwn_end_dt
, lc_dtl_dwn_status
FROM download_batch_info
WHERE download_id = 'ORCHID_SHIPMENT_DTL_INTF';
EXCEPTION
WHEN NO_DATA_FOUND THEN
DBMS_OUTPUT.PUT_LINE (' No Data Found for ORCHID_SHIPMENT_DTL_INTF in Download Batch Info table...!!!');
RAISE;
WHEN TOO_MANY_ROWS THEN
DBMS_OUTPUT.PUT_LINE (' Too Many Rows found for ORCHID_SHIPMENT_DTL_INTF in Download Batch Info table...!!!');
RAISE;
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE (' Following error occured while getting batch control number for ORCHID_SHIPMENT_DTL_INTF in Download Batch Info table...!!!'||SQLERRM);
RAISE;
END;
-- if previous run is not sucess then do nothing and return.
OPEN c_com_shphdr ( ld_hdr_dwn_end_dt ) ;
LOOP
-- delete the collection for every cycle
lr_com_shphdr.DELETE;
lr_orchid_shphdr.DELETE;
lr_com_shpadr.DELETE;
lr_orchid_shpadr.DELETE;
lr_com_shpdtl.DELETE;
lr_orchid_shpdtl.DELETE;
-- fetch the order header records to collection
FETCH c_com_shphdr BULK COLLECT INTO lr_com_shphdr LIMIT 500;
-- where there is no record in the collection the exit from the loop
EXIT WHEN lr_com_shphdr.COUNT = 0;
-- build your logic there to populate the data into order header collection.
FOR i IN 1..lr_com_shphdr.COUNT
LOOP
-- accumulate header running sequence number
ln_hdr_running_seq := ln_hdr_running_seq + 1;
ln_shphdr_seq := ln_hdr_running_seq;
-- Get the business unit for the customer from com_customer
BEGIN
SELECT business_unit
INTO lv_company_code
FROM com_customer@com_pricing.world
WHERE custno = lr_com_shphdr(i).del_custno;
EXCEPTION
WHEN OTHERS THEN
lv_company_code := NULL;
END;
-- Get the ordno, confirm_date from COM_PLLINE
BEGIN
SELECT ordno
, confirm_date
INTO lv_erp_ord_no
, lv_actual_ship_date
FROM com_plline@com_pricing.world cpl
WHERE cpl.plheadno = lr_com_shphdr(i).plheadno
AND ROWNUM = 1;
EXCEPTION
WHEN OTHERS THEN
lv_erp_ord_no := NULL;
lv_actual_ship_date := NULL;
END;
-- Get the po_no, Entry_date from COM_OLINE
BEGIN
SELECT po_no
, entrydate
INTO lv_po_no
, lv_ord_date
FROM com_oline@com_pricing.world col
WHERE col.ordno = lv_erp_ord_no
AND ROWNUM = 1;
EXCEPTION
WHEN OTHERS THEN
lv_po_no := NULL;
lv_ord_date := NULL;
END;
-- To assign the Bol Number from Lading Number
IF lr_com_shphdr(i).carr_no NOT IN ('FEDX','UPS') THEN
lr_orchid_shphdr(i).bol_no := lr_com_shphdr(i).lading_no;
ELSE
lr_orchid_shphdr(i).bol_no := NULL;
END IF;
-- For each order header get the Shipment Delivery Adderss
OPEN c_com_shpadr ( lr_com_shphdr(i).custaddr);
FETCH c_com_shpadr BULK COLLECT INTO lr_com_shpadr;
-- where there is no record in the collection the exit from the loop
EXIT WHEN lr_com_shpadr.COUNT = 0;
-- biuld your logic here to populate the del address collection.
FOR j IN 1..lr_com_shpadr.COUNT
LOOP
-- accumulate the loop count into temp variable, so that will through tell each set of order header.
cnt := cnt + 1;
-- accumolate the header running sequence number.
ln_adr_running_seg := ln_adr_running_seg + 1;
ln_shpadr_seg := ln_adr_running_seg;
-- move the order address data into collection.
lr_orchid_shpadr(cnt).client_id := lr_com_shphdr(i).del_custno;
lr_orchid_shpadr(cnt).ord_no := lr_com_shphdr(i).plheadno;
lr_orchid_shpadr(cnt).tracking_no := lr_com_shphdr(i).tracking_no;
lr_orchid_shpadr(cnt).addr_name := lr_com_shpadr(j).addr_name;
lr_orchid_shpadr(cnt).attn_line := lr_com_shphdr(i).attn_line;
lr_orchid_shpadr(cnt).addr_line1 := lr_com_shpadr(j).addr_line1;
lr_orchid_shpadr(cnt).addr_line2 := lr_com_shpadr(j).addr_line2;
lr_orchid_shpadr(cnt).addr_line3 := NULL;
lr_orchid_shpadr(cnt).addr_line4 := NULL;
lr_orchid_shpadr(cnt).addr_line5 := NULL;
lr_orchid_shpadr(cnt).city := lr_com_shpadr(j).city;
lr_orchid_shpadr(cnt).state_cd := lr_com_shpadr(j).state_cd;
lr_orchid_shpadr(cnt).zip := lr_com_shpadr(j).zip;
lr_orchid_shpadr(cnt).zip_ext := NULL;
lr_orchid_shpadr(cnt).country_cd := lr_com_shpadr(j).country_cd;
lr_orchid_shpadr(cnt).tax_geo_cd := NULL;
lr_orchid_shpadr(cnt).work_phone := lr_com_shpadr(j).work_phone;
lr_orchid_shpadr(cnt).email1 := lr_com_shpadr(j).email1;
lr_orchid_shpadr(cnt).cre_dat := SYSDATE;
lr_orchid_shpadr(cnt).cre_usr := USER;
lr_orchid_shpadr(cnt).batch_ctrl_no := lv_adr_batch_ctrl_no;
END LOOP;
CLOSE c_com_shpadr;
-- For each order header get the order detail/delivery segment data
OPEN c_com_shpdtl ( lr_com_shphdr(i).plheadno );
FETCH c_com_shpdtl BULK COLLECT INTO lr_com_shpdtl;
-- where there is no record in the collection the exit from the loop
EXIT WHEN lr_com_shpdtl.COUNT = 0;
-- build your logic here to populate the order detail collection
FOR k IN 1..lr_com_shpdtl.COUNT
LOOP
-- accumulate the loop count into a temp variable, so that will through till each set of Order Header.
cnt1 := cnt1 + 1;
-- accumulate header running sequence number
ln_dtl_running_seq := ln_dtl_running_seq + 1;
ln_shpdtl_seq := ln_dtl_running_seq;
-- Get Quantity for the delvery from delevery segment table.
BEGIN
SELECT NVL(Qty,0)
INTO lv_ord_qty
FROM com_oldelseg@com_pricing.world cds
WHERE cds.ordno = lr_com_shpdtl(k).erp_ord_no
AND cds.ol_no = lr_com_shpdtl(k).erp_line_no
AND cds.ol_segno = lr_com_shpdtl(k).ol_segno;
EXCEPTION
WHEN OTHERS THEN
lv_ord_qty := NULL;
END;
-- Get Title for the salesitem from the salesitem table.
BEGIN
SELECT Title
INTO lv_sku_desc
FROM com_salesitem@com_pricing.world cs
WHERE cs.fg_id = lr_com_shpdtl(k).sku;
EXCEPTION
WHEN OTHERS THEN
lv_sku_desc := NULL;
END;
-- move the Order detail data into collection
lr_orchid_shpdtl(cnt1).client_id := lr_com_shphdr(i).client_id;
lr_orchid_shpdtl(cnt1).ord_no := lr_com_shphdr(i).plheadno;
lr_orchid_shpdtl(cnt1).ord_line_no := lr_com_shpdtl(k).ord_line_no;
lr_orchid_shpdtl(cnt1).erp_line_no := lr_com_shpdtl(k).erp_line_no;
lr_orchid_shpdtl(cnt1).sku := lr_com_shpdtl(k).sku;
lr_orchid_shpdtl(cnt1).tracking_no := lr_com_shphdr(i).tracking_no;
lr_orchid_shpdtl(cnt1).container_no := NULL;
lr_orchid_shpdtl(cnt1).ord_qty := lv_ord_qty;
lr_orchid_shpdtl(cnt1).ship_qty := lr_com_shpdtl(k).ship_qty;
lr_orchid_shpdtl(cnt1).price_point := NULL;
lr_orchid_shpdtl(cnt1).pick_invoice_no := NULL;
lr_orchid_shpdtl(cnt1).cancel_qty := NULL;
lr_orchid_shpdtl(cnt1).bldg_id := NULL; --lr_com_shpdtl(k).bldg_id;
lr_orchid_shpdtl(cnt1).sku_company := NULL; --lr_com_shpdtl(k).sku_company;
lr_orchid_shpdtl(cnt1).sku_desc := lv_sku_desc;
lr_orchid_shpdtl(cnt1).icc_cd1 := NULL; --lr_com_shpdtl(k).icc_cd1;
lr_orchid_shpdtl(cnt1).erp_ord_no := lr_com_shpdtl(k).erp_ord_no;
lr_orchid_shpdtl(cnt1).cre_dat := SYSDATE;
lr_orchid_shpdtl(cnt1).cre_usr := USER;
lr_orchid_shpdtl(cnt1).batch_ctrl_no := lv_dtl_batch_ctrl_no;
END LOOP;
CLOSE c_com_shpdtl;
-- build the logic to populate Order Header
lr_orchid_shphdr(i).client_id := lr_com_shphdr(i).client_id;
lr_orchid_shphdr(i).ord_no := lr_com_shphdr(i).plheadno;
lr_orchid_shphdr(i).tracking_no := lr_com_shphdr(i).tracking_no;
lr_orchid_shphdr(i).container_no := NULL; -- container number is not maintained in COM
lr_orchid_shphdr(i).carrier_id := lr_com_shphdr(i).carrier_id;
lr_orchid_shphdr(i).plant_id := lr_com_shphdr(i).plant_id;
lr_orchid_shphdr(i).erp_ord_no := lv_erp_ord_no;
lr_orchid_shphdr(i).erp_ord_no2 := NULL;
lr_orchid_shphdr(i).po_no := lv_po_no;
lr_orchid_shphdr(i).ship_to_id := lr_com_shphdr(i).ship_to_id;
lr_orchid_shphdr(i).ship_to_addr_id := lr_com_shphdr(i).custaddr;
lr_orchid_shphdr(i).scac := NULL; --lr_com_shphdr(i).scac;
lr_orchid_shphdr(i).actual_ship_date := lv_actual_ship_date;
lr_orchid_shphdr(i).cfm_order_type := lr_com_shphdr(i).cfm_order_type;
lr_orchid_shphdr(i).company_code := lv_company_code;
lr_orchid_shphdr(i).no_of_order_lines := NULL; --lr_com_shphdr(i).no_of_order_lines;
lr_orchid_shphdr(i).pick_invoice_no := NULL;
lr_orchid_shphdr(i).ord_date := lv_ord_date;
lr_orchid_shphdr(i).orig_tender_date := NULL;
lr_orchid_shphdr(i).orig_delv_date := NULL;
lr_orchid_shphdr(i).delivery_flag := NULL;
lr_orchid_shphdr(i).delv_date_from := NULL;
lr_orchid_shphdr(i).delv_date_to := NULL;
lr_orchid_shphdr(i).orig_carr_cd := NULL;
lr_orchid_shphdr(i).routing_comment := NULL;
lr_orchid_shphdr(i).segment_type := NULL;
lr_orchid_shphdr(i).back_order_flag := NULL;
lr_orchid_shphdr(i).addr_override_flag := NULL;
lr_orchid_shphdr(i).fmx_assigned_carr := NULL;
lr_orchid_shphdr(i).fmx_assigned_ship_date := NULL;
lr_orchid_shphdr(i).fmx_assigned_delv_date := NULL;
lr_orchid_shphdr(i).freight_terms := lr_com_shphdr(i).freight_terms;
lr_orchid_shphdr(i).fmx_load_id := NULL;
lr_orchid_shphdr(i).asn_type := NULL;
lr_orchid_shphdr(i).icc_cd1 := NULL; --lr_com_shphdr(i).icc_cd1;
lr_orchid_shphdr(i).trans_type := NULL;
lr_orchid_shphdr(i).ref_no1 := NULL;
lr_orchid_shphdr(i).ref_no2 := NULL;
lr_orchid_shphdr(i).ref_no3 := NULL;
lr_orchid_shphdr(i).ref_no4 := NULL;
lr_orchid_shphdr(i).cre_dat := SYSDATE;
lr_orchid_shphdr(i).cre_usr := USER;
lr_orchid_shphdr(i).batch_ctrl_no := lv_hdr_batch_ctrl_no;
-- logic to get total boxes and weight.
BEGIN
SELECT SUM(no_cartons), SUM(weight)
INTO lr_orchid_shphdr(i).total_boxes
, lr_orchid_shphdr(i).weight
FROM com_plline@com_pricing.world pll
WHERE pll.plheadno = lr_com_shphdr(i).plheadno;
EXCEPTION
WHEN OTHERS THEN
lr_orchid_shphdr(i).total_boxes := NULL;
lr_orchid_shphdr(i).weight := NULL;
END;
END LOOP;
-- initialize the variables for next loop cycle.
cnt := 0;
cnt1 := 0;
-- populate the shipment header interface table.
FOR x IN 1..lr_orchid_shphdr.COUNT
LOOP
ld_hdr_download_end_tstamp := lr_orchid_shphdr(x).cre_dat;
INSERT INTO orchid_shipment_hdr_intf
(record_qualifier
,client_id
,ord_no
,tracking_no
,container_no
,bol_no
,carrier_id
,plant_id
,erp_ord_no
,erp_ord_no2
,po_no
,ship_to_id
,ship_to_addr_id
,scac
,actual_ship_date
,cfm_order_type
,company_code
,no_of_order_lines
,pick_invoice_no
,total_boxes
,weight
,ord_date
,orig_tender_date
,orig_delv_date
,delivery_flag
,delv_date_from
,delv_date_to
,orig_carr_cd
,routing_comment
,segment_type
,back_order_flag
,addr_override_flag
,fmx_assigned_carr
,fmx_assigned_ship_date
,fmx_assigned_delv_date
,freight_terms
,fmx_load_id
,asn_type
,upl_status
,icc_cd1
,trans_type
,ref_no1
,ref_no2
,ref_no3
,ref_no4
,cre_dat
,cre_usr
,batch_ctrl_no)
VALUES
( 10
,lr_orchid_shphdr(x).client_id
,lr_orchid_shphdr(x).ord_no
,lr_orchid_shphdr(x).tracking_no
,lr_orchid_shphdr(x).container_no
,lr_orchid_shphdr(x).bol_no
,lr_orchid_shphdr(x).carrier_id
,lr_orchid_shphdr(x).plant_id
,lr_orchid_shphdr(x).erp_ord_no
,lr_orchid_shphdr(x).erp_ord_no2
,lr_orchid_shphdr(x).po_no
,lr_orchid_shphdr(x).ship_to_id
,lr_orchid_shphdr(x).ship_to_addr_id
,lr_orchid_shphdr(x).scac
,lr_orchid_shphdr(x).actual_ship_date
,lr_orchid_shphdr(x).cfm_order_type
,lr_orchid_shphdr(x).company_code
,lr_orchid_shphdr(x).no_of_order_lines
,lr_orchid_shphdr(x).pick_invoice_no
,lr_orchid_shphdr(x).total_boxes
,lr_orchid_shphdr(x).weight
,lr_orchid_shphdr(x).ord_date
,lr_orchid_shphdr(x).orig_tender_date
,lr_orchid_shphdr(x).orig_delv_date
,lr_orchid_shphdr(x).delivery_flag
,lr_orchid_shphdr(x).delv_date_from
,lr_orchid_shphdr(x).delv_date_to
,lr_orchid_shphdr(x).orig_carr_cd
,lr_orchid_shphdr(x).routing_comment
,lr_orchid_shphdr(x).segment_type
,lr_orchid_shphdr(x).back_order_flag
,lr_orchid_shphdr(x).addr_override_flag
,lr_orchid_shphdr(x).fmx_assigned_carr
,lr_orchid_shphdr(x).fmx_assigned_ship_date
,lr_orchid_shphdr(x).fmx_assigned_delv_date
,lr_orchid_shphdr(x).freight_terms
,lr_orchid_shphdr(x).fmx_load_id
,lr_orchid_shphdr(x).asn_type
,00
,lr_orchid_shphdr(x).icc_cd1
,lr_orchid_shphdr(x).trans_type
,lr_orchid_shphdr(x).ref_no1
,lr_orchid_shphdr(x).ref_no2
,lr_orchid_shphdr(x).ref_no3
,lr_orchid_shphdr(x).ref_no4
,lr_orchid_shphdr(x).cre_dat
,lr_orchid_shphdr(x).cre_usr
,lr_orchid_shphdr(x).batch_ctrl_no);
END LOOP;
-- populate the shipment address interface table.
FOR y IN 1..lr_orchid_shpadr.COUNT
LOOP
ld_adr_download_end_tstamp := lr_orchid_shpadr(y).cre_dat;
INSERT INTO orchid_shipment_address_intf
( record_qualifier
, client_id
, ord_no
, tracking_no
, addr_name
, attn_line
, addr_line1
, addr_line2
, addr_line3
, addr_line4
, addr_line5
, city
, state_cd
, zip
, zip_ext
, country_cd
, tax_geo_cd
, work_phone
, email1
, cre_dat
, cre_usr
, batch_ctrl_no)
VALUES ( 14
, lr_orchid_shpadr(y).client_id
, lr_orchid_shpadr(y).ord_no
, lr_orchid_shpadr(y).tracking_no
, lr_orchid_shpadr(y).addr_name
, lr_orchid_shpadr(y).attn_line
, lr_orchid_shpadr(y).addr_line1
, lr_orchid_shpadr(y).addr_line2
, lr_orchid_shpadr(y).addr_line3
, lr_orchid_shpadr(y).addr_line4
, lr_orchid_shpadr(y).addr_line5
, lr_orchid_shpadr(y).city
, lr_orchid_shpadr(y).state_cd
, lr_orchid_shpadr(y).zip
, lr_orchid_shpadr(y).zip_ext
, lr_orchid_shpadr(y).country_cd
, lr_orchid_shpadr(y).tax_geo_cd
, lr_orchid_shpadr(y).work_phone
, lr_orchid_shpadr(y).email1
, lr_orchid_shpadr(y).cre_dat
, lr_orchid_shpadr(y).cre_usr
, lr_orchid_shpadr(y).batch_ctrl_no);
END LOOP;
-- populate the shipment detail interface table.
FOR z IN 1..lr_orchid_shpdtl.COUNT
LOOP
ld_dtl_download_end_tstamp := lr_orchid_shpdtl(z).cre_dat;
INSERT INTO orchid_shipment_dtl_intf
( record_qualifier
, client_id
, ord_no
, ord_line_no
, erp_line_no
, sku
, tracking_no
, container_no
, ord_qty
, ship_qty
, price_point
, pick_invoice_no
, cancel_qty
, bldg_id
, sku_company
, sku_desc
, icc_cd1
, erp_ord_no
, cre_dat
, cre_usr
, batch_ctrl_no)
VALUES ( 20
, lr_orchid_shpdtl(z).client_id
, lr_orchid_shpdtl(z).ord_no
, lr_orchid_shpdtl(z).ord_line_no
, lr_orchid_shpdtl(z).erp_line_no
, lr_orchid_shpdtl(z).sku
, lr_orchid_shpdtl(z).tracking_no
, lr_orchid_shpdtl(z).container_no
, lr_orchid_shpdtl(z).ord_qty
, lr_orchid_shpdtl(z).ship_qty
, lr_orchid_shpdtl(z).price_point
, lr_orchid_shpdtl(z).pick_invoice_no
, lr_orchid_shpdtl(z).cancel_qty
, lr_orchid_shpdtl(z).bldg_id
, lr_orchid_shpdtl(z).sku_company
, lr_orchid_shpdtl(z).sku_desc
, lr_orchid_shpdtl(z).icc_cd1
, lr_orchid_shpdtl(z).erp_ord_no
, lr_orchid_shpdtl(z).cre_dat
, lr_orchid_shpdtl(z).cre_usr
, lr_orchid_shpdtl(z).batch_ctrl_no);
END LOOP;
COMMIT;
END LOOP;
CLOSE c_com_shphdr;
-- set the status to success
UPDATE comoes.download_batch_info
SET batch_ctrl_no = orchid_plhead_btch_ctrl_seq.NEXTVAL
, dwn_status = '90'
, download_end_tstamp = NVL(ld_hdr_download_end_tstamp,SYSDATE)
WHERE download_id = 'ORCHID_SHIPMENT_HDR_INTF'
AND batch_ctrl_no = lv_hdr_batch_ctrl_no;
UPDATE comoes.download_batch_info
SET batch_ctrl_no = orchid_address_btch_ctrl_seq.NEXTVAL
, dwn_status = '90'
, download_end_tstamp = NVL(ld_hdr_download_end_tstamp,SYSDATE)
WHERE download_id = 'ORCHID_SHIPMENT_ADDRESS_INTF'
AND batch_ctrl_no = lv_adr_batch_ctrl_no;
UPDATE comoes.download_batch_info
SET batch_ctrl_no = orchid_plline_btch_ctrl_seq.NEXTVAL
, dwn_status = '90'
, download_end_tstamp = NVL(ld_dtl_download_end_tstamp,SYSDATE)
WHERE download_id = 'ORCHID_SHIPMENT_DTL_INTF'
AND batch_ctrl_no = lv_dtl_batch_ctrl_no;
-- Update the download status to success in the interface table.
-- Shipment Header
COMMIT;
EXCEPTION
WHEN OTHERS THEN
-- load is not sucess then set the status to fail
UPDATE comoes.download_batch_info
SET dwn_status = '99'
WHERE download_id = 'ORCHID_SHIPMENT_HDR_INTF'
AND batch_ctrl_no = lv_hdr_batch_ctrl_no;
UPDATE comoes.download_batch_info
SET dwn_status = '99'
WHERE download_id = 'ORCHID_SHIPMENT_ADDRESS_INTF'
AND batch_ctrl_no = lv_adr_batch_ctrl_no;
UPDATE comoes.download_batch_info
SET dwn_status = '99'
WHERE download_id = 'ORCHID_SHIPMENT_DTL_INTF'
AND batch_ctrl_no = lv_dtl_batch_ctrl_no;
COMMIT;
DBMS_OUTPUT.PUT_LINE('Following error occured while executing ORCHID_SHIPMENT_INTF procedure...!!!'||SQLERRM);
RAISE;
END orchid_shipment_interface;Edited by: BluShadow on 03-Aug-2011 13:28
added {noformat}{noformat} tags. Please read {message:id=9360002} to learn to do this yourself. &nbPlease read the Forum FAQ on how to ask a question, particularly how to format code
SQL and PL/SQL FAQ
SQL and PL/SQL FAQ
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE (' Following error occured while getting batch control number for ORCHID_SHIPMENT_HDR_INTF in Download Batch Info table...!!!'||SQLERRM);
RAISE;http://tkyte.blogspot.com/2008/01/why-do-people-do-this.html -
How do I use For loop to check each node and import them to a new document?
In my function I would like to use a For loop to get all the statutes (xml) inside the object
objXmlBcaResponseDoc. In my case there are 2 statutes. I would like the output to look like the one I have posted here below. I am not sure how to do the For loop. The commented For loop is from another function but it is not working inside
this function.
The output is added into the **objXmlResponseMessageDoc** object and should look like this with 2 statutes (ns1:Statute) and a totalCount=2
<BasicSearchQueryResponse xmlns="http://crimnet.state.mn.us/mnjustice/statute/service/4.0">
<StatutesXml>
<Statutes runType="Request" runDateTime="2015-03-17T10:23:04" totalCount="2">
<ns1:Statute xmlns:ns1="http://crimnet.state.mn.us/mnjustice/statute/messages/4.0">
<StatuteId xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0">8471</StatuteId>
<Chapter xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0">60</Chapter>
<Section xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0">55</Section>
<Subdivision xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0"/>
</ns1:Statute>
<ns1:Statute>
<StatuteId xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0">9722</StatuteId>
<Chapter xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0">90</Chapter>
<Section xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0">25</Section>
<Subdivision xsi:nil="true" xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0"/>
</ns1:Statute>
</Statutes>
</StatutesXml>
</BasicSearchQueryResponse>
My xml doc is found inside objXmlBcaResponseDoc Here is xml inside
objXmlBcaResponseDoc object
<BasicSearchQueryResponse xmlns="http://crimnet.state.mn.us/mnjustice/statute/service/4.0">
<ns1:Statutes xmlns:ns1="http://crimnet.state.mn.us/mnjustice/statute/messages/4.0">
<ns1:Statute>
<StatuteId xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0">8471</StatuteId>
<Chapter xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0">60</Chapter>
<Section xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0">55</Section>
<Subdivision xsi:nil="true" xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0"/>
</ns1:Statute>
<ns1:Statute>
<StatuteId xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0">9722</StatuteId>
<Chapter xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0">90</Chapter>
<Section xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0">25</Section>
<Subdivision xsi:nil="true" xmlns="http://crimnet.state.mn.us/mnjustice/statute/4.0"/>
</ns1:Statute>
</BasicSearchQueryResponse>
Here is my function
Function GetStatutesByChapter(ByVal aobjXmlGetStatuteRequestNode As XmlNode, ByVal aobjXMLNameSpaceManager As XmlNamespaceManager, ByVal aobjBroker As ServiceCatalog.Library.v4.Broker) As XmlDocument
Dim objXmlRequestMessageDoc As XmlDocument
Dim objXmlResponseMessageDoc As XmlDocument
Dim intCount As Integer
aobjBroker.PostMessageWarehouseInformationalMessage("Chapter found.", 1)
objXmlResponseMessageDoc = New XmlDocument
'Add the first element into the document GetStatuteByChapter with its namespace
objXmlResponseMessageDoc.AppendChild(objXmlResponseMessageDoc.CreateElement("BasicSearchQueryResponse", "http://crimnet.state.mn.us/mnjustice/statute/service/4.0"))
'Build the initial response document
objXmlResponseMessageDoc = New XmlDocument
'Add the first element into the document GetStatutesResponse with its namespace
objXmlResponseMessageDoc.AppendChild(objXmlResponseMessageDoc.CreateElement("GetStatutesResponse", "http://www.courts.state.mn.us/StatuteService/1.0"))
'Add a child node to the GetStatutesResponse node
objXmlResponseMessageDoc.SelectSingleNode("ss:GetStatutesResponse", aobjXMLNameSpaceManager).AppendChild(objXmlResponseMessageDoc.CreateElement("StatutesXml", "http://www.courts.state.mn.us/StatuteService/1.0"))
objXmlResponseMessageDoc.SelectSingleNode("ss:GetStatutesResponse/ss:StatutesXml", aobjXMLNameSpaceManager).AppendChild(objXmlResponseMessageDoc.CreateElement("Statutes", "http://www.courts.state.mn.us/StatuteService/1.0"))
'Convert the node Statutes into an element and set the runType attribute (runType="Request") by adding it's value Request
CType(objXmlResponseMessageDoc.SelectSingleNode("ss:GetStatutesResponse/ss:StatutesXml/ss:Statutes", aobjXMLNameSpaceManager), System.Xml.XmlElement).SetAttribute("runType", "Request")
'Convert the node Statutes into an element and set the attribute (runDateTime="2015-03-05T10:29:40") by adding it
CType(objXmlResponseMessageDoc.SelectSingleNode("ss:GetStatutesResponse/ss:StatutesXml/ss:Statutes", aobjXMLNameSpaceManager), System.Xml.XmlElement).SetAttribute("runDateTime", Format(Now, "yyyy-MM-ddTHH:mm:ss"))
'Create the BCA request message
objXmlRequestMessageDoc = New XmlDocument
objXmlRequestMessageDoc.AppendChild(objXmlRequestMessageDoc.CreateElement("ns:BasicSearchQueryRequest", aobjXMLNameSpaceManager.LookupNamespace("ns")))
objXmlRequestMessageDoc.SelectSingleNode("ns:BasicSearchQueryRequest", aobjXMLNameSpaceManager).AppendChild(objXmlRequestMessageDoc.CreateElement("ns1:BasicSearchCriteria", aobjXMLNameSpaceManager.LookupNamespace("ns1")))
objXmlRequestMessageDoc.SelectSingleNode("ns:BasicSearchQueryRequest/ns1:BasicSearchCriteria", aobjXMLNameSpaceManager).AppendChild(objXmlRequestMessageDoc.CreateElement("ns2:Chapter", aobjXMLNameSpaceManager.LookupNamespace("st")))
objXmlRequestMessageDoc.SelectSingleNode("ns:BasicSearchQueryRequest/ns1:BasicSearchCriteria", aobjXMLNameSpaceManager).AppendChild(objXmlRequestMessageDoc.CreateElement("ns2:Section", aobjXMLNameSpaceManager.LookupNamespace("st")))
objXmlRequestMessageDoc.SelectSingleNode("ns:BasicSearchQueryRequest/ns1:BasicSearchCriteria", aobjXMLNameSpaceManager).AppendChild(objXmlRequestMessageDoc.CreateElement("ns2:Subdivision", aobjXMLNameSpaceManager.LookupNamespace("st")))
'Uncomment last working section below
objXmlRequestMessageDoc.DocumentElement.SelectSingleNode("ns1:BasicSearchCriteria/st:Chapter", aobjXMLNameSpaceManager).InnerText = aobjXmlGetStatuteRequestNode.SelectSingleNode("ss:Statute/ss:Chapter", aobjXMLNameSpaceManager).InnerText
'check if there is a section and or subdivision if it is there then set the value
If Not (aobjXmlGetStatuteRequestNode.SelectSingleNode("ss:Statute/ss:Section", aobjXMLNameSpaceManager) Is Nothing) Then
objXmlRequestMessageDoc.DocumentElement.SelectSingleNode("ns1:BasicSearchCriteria/st:Section", aobjXMLNameSpaceManager).InnerText = aobjXmlGetStatuteRequestNode.SelectSingleNode("ss:Statute/ss:Section", aobjXMLNameSpaceManager).InnerText
End If
If Not (aobjXmlGetStatuteRequestNode.SelectSingleNode("ss:Statute/ss:Subdivision", aobjXMLNameSpaceManager) Is Nothing) Then
objXmlRequestMessageDoc.DocumentElement.SelectSingleNode("ns1:BasicSearchCriteria/st:Subdivision", aobjXMLNameSpaceManager).InnerText = aobjXmlGetStatuteRequestNode.SelectSingleNode("ss:Statute/ss:Subdivision", aobjXMLNameSpaceManager).InnerText
End If
'check if there is a section and or subdivision if it is there then set the value
aobjBroker.PostMessageWarehouseSnapshot(objXmlRequestMessageDoc.OuterXml, "Request Message", 1)
'Call the BCA service
intCount = 0
'This is where I want to use a For loop to check for the statutes found using the Chapter
'Loop through each Id
'For Each objXmlStatuteIdNode In aobjXmlGetStatuteRequestNode.SelectNodes("ss:Statute/ss:StatuteId/ss:Id[string-length(.)>0]", aobjXMLNameSpaceManager)
'Create the BCA request message
'objXmlRequestMessageDoc = New XmlDocument
'objXmlRequestMessageDoc.AppendChild(objXmlRequestMessageDoc.CreateElement("ns:SingleStatuteRequest", aobjXMLNameSpaceManager.LookupNamespace("ns")))
'objXmlRequestMessageDoc.SelectSingleNode("ns:SingleStatuteRequest", aobjXMLNameSpaceManager).AppendChild(objXmlRequestMessageDoc.CreateElement("ns:statuteId", aobjXMLNameSpaceManager.LookupNamespace("ns")))
'objXmlRequestMessageDoc.DocumentElement.SelectSingleNode("ns:statuteId", aobjXMLNameSpaceManager).InnerText = objXmlStatuteIdNode.InnerText aobjBroker.PostMessageWarehouseSnapshot(objXmlRequestMessageDoc.OuterXml, "Request Message", 1)
'intCount = intCount + 1
'objXmlBcaResponseDoc = New XmlDocument
'File name is BCASearchQueryResponse.xml
'objXmlBcaResponseDoc.Load("\\j00000swebint\mscapps\deve\appfiles\temp\BCASearchQueryResponse.xml")
'objXmlResponseMessageDoc.DocumentElement.SelectSingleNode("ss:StatutesXml/ss:Statutes", aobjXMLNameSpaceManager).AppendChild(objXmlResponseMessageDoc.ImportNode(objXmlBcaResponseDoc.DocumentElement.SelectSingleNode("ns1:Statute", aobjXMLNameSpaceManager), True))
'Next
'Count how many Statute nodes found
CType(objXmlResponseMessageDoc.SelectSingleNode("ss:BasicSearchQueryResponse/ss:StatutesXml/ss:Statutes", aobjXMLNameSpaceManager), System.Xml.XmlElement).SetAttribute("totalCount", CStr(intCount))
Return objXmlResponseMessageDoc
End FunctionWhat is XPath and what does it do that you're impressed with?
Yes, I see your link, but give me the abbreviated elevator speech on what it is please. It has me curious.
http://searchsoa.techtarget.com/definition/XPath
http://www.techrepublic.com/article/easily-navigate-xml-with-vbnet-and-xpath/
http://www.techrepublic.com/article/using-xpath-string-functions-in-xslt-templates/
The way that all this is being used by me now on a project is the HTML controls on the screen are built by XML not only about what the controls are and their attributes, but the data from from the database is XML too with both going through transfermations
vis XSLT as the HTML controls are built dynamically by XML data for the controls and the XML database data with decision being made in the transfermation on the fly.
There are many usages with Xpath not just this one I am talking about with Xpath. You can do the same kind of thing with XAML and WPF forms as they are dynamically built. But it goes well beyond what I am talking about and the usage of Xpath. Xpath 3.0
is the latest version.
http://www.balisage.net/Proceedings/vol10/html/Novatchev01/BalisageVol10-Novatchev01.html
Thanks - I'll look into that at some point.
Still lost in code, just at a little higher level. -
I have been a software engineer for a number of years now, and thus far I have never come across any coding issues that truly merit a post such as this. Someone has almost always run across the issue before, so there is no need to reinvent the wheel, or solution as it were.
However, a number of times I have run across instances where the JRE simply... does not execute parts of my code, and throws no exceptions.
The sample code is a simple logging application, watered down to the bare minimum for the purposes of this forum:
public class Log {
public static void main(String[] args) {Log log = new Log();}
public Log() {Logger.log("Hello World");}
import java.util.*;*
import java.io.*;
import java.text.SimpleDateFormat;
public abstract class Logger {
private static final int SIZE = 2;
private static final SimpleDateFormat DAY = new SimpleDateFormat("EEEE");
private static final String
DIR = "logs/",
EXT = ".log",
FILTER = ".*log\\z",
DNE = "DNE";
private static int i,oldest;
private static long previous = 0;
private static FileFilter filter = new LogFilter();
private static FileWriter out;
private static File file,directory;
private static File[] list;
public synchronized static void log(String param) {
try {
directory = new File(DIR);
file = new File(DIR + getDay() + EXT);
list = directory.listFiles(filter);
if (file.createNewFile()) {
readOnly();
reconcile();
write(param);
catch (Exception exception) {}
private static void write(String param) throws Exception {
out = new FileWriter(file, true);
out.write(param);
out.close();
private static void readOnly() throws Exception {
for (i=0;i<list.length;i++) {list.setReadOnly();}
private static void reconcile() {
try {
previous = list[SIZE].lastModified();
oldest = SIZE;
for (i=SIZE;i<=0;i--) {
if (list[i].lastModified() <= previous) {
previous = list[i].lastModified();
oldest = i;
list[oldest].delete();
catch (Exception exception) {System.out.println("Skipping reconciliation...");}
private static String getDay() throws Exception {
return DAY.format(Calendar.getInstance().getTime());
private static class LogFilter implements FileFilter {
public LogFilter() {}
public boolean accept(File param) {
try {
if ((param.getName()).matches(FILTER)) {return true;}
else {return false;}
catch (Exception exception) {return false;}
*The problem*:
Ok, easy visual, this is the "log/" directory as I run the Log.java application repeatedly and iterate the date on my computer as I do so.
Thursday
*log/*
+Thursday.log+
Friday
*log/*
+Thursday.log+
+Friday.log+
Saturday
*log/*
+Thursday.log+
+Friday.log+
+Saturday.log+
Sunday
*log/*
+Friday.log+
+Saturday.log+
+Sunday.log+
Monday
*log/*
+Friday.log+
+Saturday.log+
+Monday.log+
This is the point at which I go ???
Turns out, the JRE skips the execution of my for loop in the *reconcile()* method when the date rolls over to Monday, and from then on it simply deletes the previous day's log instead of the oldest log.
Why? Who knows.
Things I have tried:
- Using another variable integer for the *readOnly()* method
- Removing the synchronized keyword from the *log(String param)* method
- Second call to *directory.listFiles(filter)* and setting *SIZE* to *3* after the old files have been set to read-only
- Removing the call to *readOnly()*
- Verified that the call to *readOnly()* does not alter the +modified+ date on the log files
- Changed Logger.java from a +static+ class to a +local+ class
Things I cannot do:
This log application stores privy information about end-users at locations across the country in the event that there are support issues that need to be resolved, and the agreement is that we store this information no more than three days. Just wanted to make sure, that the hopefully informed respondants to this issue, know that the obvious solution (storing seven day records), is unfortunately not available to me.
Edited by: Threadstorm on Jan 8, 2009 8:24 AMHA! Most excellent. The last place I would ever look.
Yes, seems like Java sorts the files in such a way that everything works fine without the loop until Monday rolls over.
Now I can have a better appreciation for that second set of eyes.
I use for loops so frequently that I never look at them (though I did stare at this one myself prior to this post, much to my chagrin now) but the subtracting iteration (which I use once in a blue moon) was necessary for the nature of the code.
But ok, up and running! (whew) was going to be a long day until now.
To answer your question though, the Logger is static so I don't have to pass it around to dozens and dozens of other modules but rather just include the package on the fly as I develop new modules that need to log information, and I like to write most mundane things myself if I can, that way I have the freedom to modify them at will.
Thanks again! I'm now a happy camper once more.
I'm also thankful that I don't have to chalk up another notch on the wall of cases where the JRE behaves magically and truly ignores code which I have definitely run into before. Something about listCellRenderers and the order of calls made to them, or some such and JRE doesn't read one of the lines. It's been a year or two.
Edited by: Threadstorm on Jan 8, 2009 8:47 AM -
Remove text field from Array via for loop
Hi,
i have a problem to remove text fields added via for loop.
That im doing is, via for loop im dynamically creating menu with 10 buttons.
Each button contain, dynamically created, background (shape) and text field.
And everything is fine.
But when im try to remove text fields then i got this error:
- Im using button to remove text fields - lang_btn.addEventListener(MouseEvent.CLICK, clickHandler);
ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.
at flash.display::DisplayObjectContainer/removeChild()
at Loading_Img_fla::MainTimeline/xmlLoaded()
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/onComplete()
In the script bellow marked with red is what should remove text fields from an Array, instead giving me error.
Here is my script
// Create for loop
for (var i:int = 0; i < 10; i++)
for each (xml in listItems)
if (i == xml.attribute("Id"))
// Add MovieClip to stage to hold the data
addChild(lmHolder);
lmHolder.x = 0;
lmHolder.y = 0;
// Create new MovieClip to hold buttons
lmButtonsMCArray[i] = new MovieClip();
lmButtonsMCArray[i].buttonMode = true;
lmButtonsMCArray[i].mouseChildren = false;
lmButtonsMCArray[i].x = 20;
lmButtonsMCArray[i].y = 20 + btCount * buttonSpace;
// Add each button MovieClip to lmHolder MovieClip
lmHolder.addChild(lmButtonsMCArray[i]);
// Create Background to buttons
lmButtonsArray[i] = new Shape();
lmButtonsArray[i].graphics.beginFill(lmBgColor0, 1);
lmButtonsArray[i].graphics.drawRect(0, 0, 230, 85);
lmButtonsArray[i].x = 0;
lmButtonsArray[i].y = 0;
// <<-- Add Background shape to the buttons MovieClips
lmButtonsMCArray[i].addChild(lmButtonsArray[i]);
// Create a new array to preserve data from XML List
lmNameArrayEG = new Array();
lmNameArrayUS = new Array();
// Create local variable to hold
var lmTxtFieldContentUS:String;
var lmTxtFieldContentEG:String;
var lmTxtContent:String;
// If clicked button is EG then make array with Arabic text
// If clicked button is US then make array with English text
if (footer.lang_btn.langState == "EG")
for each (var leftMenuName:XML in egLanguageList)
lmNameArrayEG.push(leftMenuName);
lmTxtFieldContentEG = lmNameArrayEG[i];
lmTxtContent = lmTxtFieldContentEG;
else
for each (var leftMenuNameUS:XML in usLanguageList)
lmNameArrayUS.push(leftMenuNameUS);
lmTxtFieldContentUS = lmNameArrayUS[i];
lmTxtContent = lmTxtFieldContentUS;
// Setup new text field each time script is executed
lmTxtFieldsArray[i] = new TextField();
lmTxtFieldsArray[i].width = 110;
lmTxtFieldsArray[i].border = false;
lmTxtFieldsArray[i].wordWrap = true;
lmTxtFieldsArray[i].multiline = true;
lmTxtFieldsArray[i].selectable = false;
lmTxtFieldsArray[i].embedFonts = true;
lmTxtFieldsArray[i].antiAliasType = AntiAliasType.ADVANCED;
lmTxtFieldsArray[i].autoSize = TextFieldAutoSize.CENTER;
lmTxtFieldsArray[i].text = lmTxtContent.toUpperCase();
lmTxtFieldsArray[i].x = 10;
lmTxtFieldsArray[i].name = "lmTxtFieldName" + i;
// <<-- Add Text fields to the Movie Clip
lmButtonsMCArray[i].addChild(lmTxtFieldsArray[i]);
// If clicked button is EG then set Arabic text format, and make array with Arabic text fields
// If clicked button is US then set English text format, and make array with Egnlish text fields
if (footer.lang_btn.langState == "EG")
lmTxtFieldsArray[i].setTextFormat(txtFormat_lm_eg);
// Make array from text fields;
pushEgTFintoArray.push(lmTxtFieldsArray[i]);
else
lmTxtFieldsArray[i].setTextFormat(txtFormat_lm_us);
// Make array from text fields;
pushUsTFintoArray.push(lmTxtFieldsArray[i]);
// If clicked button is EG then loop thrue the for loop and remove English text fields from array
// If clicked button is EG then loop thrue the for loop and remove Arabic text fields from array
if (footer.lang_btn.langState == "EG")
for (var rNr_us:Number = 0; rNr_us < pushUsTFintoArray.length; rNr_us++)
//remove the text field array from the display
removeChild(pushUsTFintoArray[rNr_us]);
//clear the array
pushUsTFintoArray = [];
else
for (var rNr_eg:Number = 0; rNr_eg < pushEgTFintoArray.length; rNr_eg++)
//remove the text field array from the display
removeChild(pushEgTFintoArray[rNr_eg]);
//clear the array
pushEgTFintoArray = [];
btCount++;it looks like those tf's are children of lmButtonsMCArray[i], not the current scope. use:
if (footer.lang_btn.langState == "EG")
for (var rNr_us:Number = 0; rNr_us < pushUsTFintoArray.length; rNr_us++)
//remove the text field array from the display
lmButtonsMCArray[rNr_us].removeChild(pushUsTFintoArray[rNr_us]);
//clear the array
pushUsTFintoArray = [];
else
for (var rNr_eg:Number = 0; rNr_eg < pushEgTFintoArray.length; rNr_eg++)
//remove the text field array from the display
lmButtonsMCArray[rNr_eg].removeChild(pushEgTFintoArray[rNr_eg]);
//clear the array
pushEgTFintoArray = []; -
Hi i'm wondering what is the format of a for loop in jstl.
for example:
my for loop:
for(int i = 0; i< stringArray.Length(); i++){
i++;
thanks<c:forEach var="i" items="stringArray">
${i}
</c:forEach>Note: stringArray should be a variable in scope, and not a scriptlet variables.
ram. -
Hi all
I have a dir that has a list of folders that are created using php that my customers upload to. the PHP creates a new folder using the system date on the days that they upload. (using this format yyyymmdd)
What I am trying to do is loop thou the folders and get todays folder and list the files that are in todays folder. I have been able to do this up to the point of if a customer folder does not have a folder called todays date.
I know I need some sort of try / catch but don't know what.
Can anyone help me please
Thanks for you time and help in advance
Craig
public void getfolderList() {
File dir = new File("/Users/craig/Documents/jBuilder_Epod/copy");
File[] getFolderNames = dir.listFiles();
if (getFolderNames != null) {
for (int gf = 0; gf < getFolderNames.length; gf++) {
String store = "" + getFolderNames[gf];
if (!store.endsWith(".DS_Store")) { // This is a mac file name Only
String folderName = "" + getFolderNames[gf];
if (!store.endsWith(".DS_Store")) { // This is a mac file name Only
//I need to have some sort of try and Catch here.
// If there is no Folder called "todaysFileName" I need to go to the next folder
//i.e. stop the for loop and go to next
String setTodaysFileName = folderName + "/";
String todaysFileName = setTodaysFileName + systemDate;
File todaysFolder = new File(todaysFileName);
File[] todaysFiles = todaysFolder.listFiles();
for (int td = 0; td < todaysFiles.length; td++) {
todaysFileName = "" + todaysFiles[td];
System.out.println("There is no folder Today........" +
todaysFileName);
}A quick guess would be that after the sStatement
File[] todaysFiles = todaysFolder.listFiles();todaysFiles is null if todaysFolder doesn't exist and you get a NullPointerException when trying to access todaysFiles.length in the following for-loop.
If that doesn't help, please be a bit more precise what kind of Exception occurs... -
How to get last Record ior Total rows in For Loop Cursor ?
Hi Friends
I would like to know , the last record in for loop cursor, i have the code in following format
cursor c1 is
select * from emp;
begin
for r1 in c1 loop
v_total_rec := ? ( i would like to know total rows in the cursor , say for example if cursor has 10 rows, i want10 into this variable )
v_count := v_count +1;
dbms_output.put_line(r1.emp_name);
end loop;
end;
Hope i am clear
Any suggestions?
Thanks
RaviEven though cursor loops are generally a Bad Idea ^tm^ as Dan says, here's an example of how you can get the information you wanted within the query itself...
SQL> ed
Wrote file afiedt.buf
1 declare
2 cursor c1 is
3 select emp.*
4 ,count(*) over (order by empno) as cnt
5 ,count(*) over () as total_cnt
6 from emp
7 order by empno;
8 begin
9 for r1 in c1 loop
10 dbms_output.put_line(r1.ename||' - row: '||r1.cnt||' of '||r1.total_cnt);
11 end loop;
12* end;
SQL> /
SMITH - row: 1 of 14
ALLEN - row: 2 of 14
WARD - row: 3 of 14
JONES - row: 4 of 14
MARTIN - row: 5 of 14
BLAKE - row: 6 of 14
CLARK - row: 7 of 14
SCOTT - row: 8 of 14
KING - row: 9 of 14
TURNER - row: 10 of 14
ADAMS - row: 11 of 14
JAMES - row: 12 of 14
FORD - row: 13 of 14
MILLER - row: 14 of 14
PL/SQL procedure successfully completed.
SQL> -
Hi all,
Been busy making this budget applet and have run into some trouble with my JTable. Each time a user inputs a selection, it is supposed to return values in the first column only. The next time a user inputs an amount, it should go into the next column, etc. As of now, the user inputs an amount and returns the values in all the columns.....How do i get the column # to increase each time a user inputs an amount? thanks!
import java.awt.*;
import javax.swing.*;
import java.awt.event.*;
import java.text.NumberFormat;
import java.util.Arrays;
import java.util.EventListener;
import javax.swing.table.*;
import javax.swing.border.Border;
import javax.swing.border.LineBorder;
import javax.swing.table.DefaultTableModel;
import javax.swing.JScrollPane;
//WRITE FOR LOOP..COLUMNS ++1 EACH TIME AN INPUT IS ENTERED..LAST COLUMN==TOTALS
public class ProjectOne extends JApplet implements ActionListener , ItemListener, EventListener {
private static String Enter = "Enter";
private JPasswordField pass;
JLabel money, inlabel, outlabel,result, taxwitheld, taxlabelsouth, quote, information;
JButton input, cleartable, clear;
Image img, butimg;
JPanel top, left, bottom, middletop, east;
ImageIcon arg;
JRadioButton jrbyes, jrbno;
ButtonGroup radgroup;
JTextField moneyinput;
String[] tableheadings = {"CATAGORIES","1", "2", "3","4","5", "TOTALS"};
Object data[] [] = { { "Rent","","","","","",""},
{"Utilities","","","","","",""},
{"Groceries","","","","","",""},
{"Clothes","","","","","",""},
{"Bills","","","","","",""},
{"Automobile","","","","","",""},
JScrollPane sp;
JTable table;
public void init()
setLayout(new BorderLayout());
setSize(850, 325);
doNside();
doEside();
doWside();
doSside();
doCenter();
public void doNside()
img = getImage( getCodeBase( ), "money-symbol.jpg" );
arg = new ImageIcon(img);
money = new JLabel("<HTML><FONT COLOR=GREEN>Alan Reno's Budget Applet </FONT>", arg ,JLabel.RIGHT );
money.setHorizontalTextPosition(JLabel.LEFT);
top = new JPanel( new FlowLayout( ) );
top.setBorder(BorderFactory.createLineBorder(Color.black));
top.setBackground(Color.WHITE);
top.add( money );
add( top, BorderLayout.NORTH );
public void doSside()
bottom = new JPanel (new FlowLayout());
taxwitheld = new JLabel("Display Taxes Witheld?", JLabel.CENTER);
jrbyes = new JRadioButton ("yes");
jrbno = new JRadioButton ("no");
jrbyes.setOpaque(false);
jrbno.setOpaque(false);
jrbyes.addItemListener(this);
jrbno.addItemListener(this);
radgroup = new ButtonGroup();
radgroup.add(jrbyes);
radgroup.add(jrbno);
Font font = new Font("Serif", Font.ITALIC,12);
Border border = LineBorder.createGrayLineBorder();
taxlabelsouth = new JLabel(" tax amount ");
taxlabelsouth.setFont(font);
taxlabelsouth.setBorder(border);
bottom.setBackground(Color.WHITE);
bottom.add(taxwitheld);
bottom.add(jrbyes);
bottom.add(jrbno);
bottom.add(taxlabelsouth);
add(bottom, BorderLayout.SOUTH);
public void doEside()
east = new JPanel (new GridLayout(2,1));
quote = new JLabel ("<HTML><FONT SIZE=+1><CENTER><B>\"Healthy</B>"
+"<BR>Wealthy</BR>"
+"<BR>and</BR>"
+"<BR>Wise\"</BR></CENTER></FONT>", JLabel.CENTER);
east.setBackground(Color.WHITE);
table = new JTable(data, tableheadings);
DefaultTableModel dmodel = new DefaultTableModel(data, tableheadings)
public boolean isCellEditable(int row,int column)
return false;
table = new JTable(dmodel);
table.setPreferredScrollableViewportSize(new Dimension( 350,70));
table.getColumnModel().getColumn(0).setPreferredWidth(150);
table.getColumnModel().getColumn(1).setPreferredWidth(80);
table.getColumnModel().getColumn(2).setPreferredWidth(80);
table.getColumnModel().getColumn(3).setPreferredWidth(80);
table.getColumnModel().getColumn(4).setPreferredWidth(80);
table.getColumnModel().getColumn(5).setPreferredWidth(80);
table.getColumnModel().getColumn(6).setPreferredWidth(90);
table.getTableHeader();
JScrollPane sp = new JScrollPane(table);
east.add(quote);
east.add(table);
east.add(sp);
sp.getViewport().add(table);
add(east, BorderLayout.EAST);
public void doWside()
left = new JPanel (new GridLayout(3, 1));
inlabel = new JLabel("Enter Amount:", JLabel.RIGHT);
outlabel = new JLabel("Enter Password to Display Information ", JLabel.RIGHT);
result = new JLabel("Information (ENTER PASSWORD): ", JLabel.RIGHT);
left.setBackground(Color.WHITE);
left.add(inlabel);
left.add(outlabel);
left.add(result);
add( left, BorderLayout.WEST );
public void doCenter()
middletop = new JPanel( new GridLayout(3,3));
moneyinput = new JTextField("$0.00",5);
moneyinput.addActionListener(this);
butimg = getImage( getCodeBase(), "button_1.gif");
input = new JButton( new ImageIcon( butimg ));
input.setForeground(Color.WHITE);
input.setBorderPainted( false);
input.setContentAreaFilled( false);
input.setFocusPainted( false );
input.setToolTipText("Select to input amount" );
input.setFont(new Font("Serif", Font.BOLD, 17));
input.addActionListener(this);
clear = new JButton("ENTER");
clear.addActionListener(this);
clear.setActionCommand(Enter);
pass = new JPasswordField(10);
pass.setActionCommand(Enter);
pass.addActionListener(this);
information = new JLabel ("<HTML><FONT SIZE=-2>*********</FONT>", JLabel.CENTER);
cleartable = new JButton("Clear Spreadsheet");
middletop.setBackground(Color.WHITE);
middletop.add(moneyinput);
middletop.add(input);
middletop.add(pass);
middletop.add(clear);
middletop.add(information);
middletop.add(cleartable);
add(middletop, BorderLayout.CENTER);
public void actionPerformed(ActionEvent ae)
String cmd = ae.getActionCommand();//password
/////////table
///////////ENTERAMOUNT///////////////////////////////////////////
Object obj = ae.getSource();
if( obj == input )
double d = Double.valueOf(moneyinput.getText()).doubleValue();
double output2 = (d/(7.38));
double a = d-output2;
NumberFormat nf = NumberFormat.getCurrencyInstance();
double rent = (a*(.45));
double utilities = (a*(.15));
double groceries = (a*(.10));
double clothes = (a*(.05));
double bills = (a*(.10));
double auto = (a*(.15));
//HERE IS THE FOR LOOP WHERE I AM HAVING TROUBLE
for (int colindex=1; colindex<=6;colindex++)
table.setValueAt(nf.format(rent), 0, colindex);
table.setValueAt(nf.format(utilities), 1, colindex);
table.setValueAt(nf.format(groceries), 2, colindex);
table.setValueAt(nf.format(clothes), 3, colindex);
table.setValueAt(nf.format(bills), 4, colindex);
table.setValueAt(nf.format(auto), 5, colindex);
validate();
repaint();
//taxlabelsouth.setText(nf.format(output2));
Hello,
*> >
Each time a user inputs a selection, it is supposed to return values in the first column only. The next time a user inputs an amount, it should go into the next column, etc.
As of now, the user inputs an amount and returns the values in all the columns (...)
//HERE IS THE FOR LOOP WHERE I AM HAVING TROUBLE
for (int colindex=1; colindex<=6;colindex++)You are aware that this line iterates (loops) over all 6 columns, right? So it's kind of normal that all columns are updated...
How do i get the column # to increase each time a user inputs an amount? thanks!To update only one column at a time, don't loop, instead keep a columnIndex as an instance variable (of the applet), and increase its value once each time you pass in this branch of code (don't loop).
Make sure to handle wrapping the value (or whatever your business logic implies when you've filled all columns), as setting the value into a column that doesn't exist (colIndex>6) will likely throw an exception.
N.B.:
validate();
repaint();validate() tells the applet to re-layout its children: this is not useful if you haven't added/removed/"resized" any children.
repaint() tells the applet to repaint itslef. Only the Jtable needs to be repainted, IMHO, and I think a repaint() command is already done automatically during the setValue(...) call, so it's probably not necessary either.
Hope this helps.
Edited by: jduprez on Nov 23, 2009 11:35 AM
Maybe you are looking for
-
Creative Cloud: Nothing But Daylight Robbery?
I work for an academic institution in Surrey that has been using Adobe CS3 Suite since 2009. Many of the Adobe tools are used around the school between students and staff, and it has become a required resource for many. With the last few PCs around t
-
Zen Micro - Installation CD error mess
Hello there... I just bought the Zen Micro today, and as I was attempting to load the installation CD, I received the following error message: "Exception occurred: Stream write error" Does anyone have a fix for this problem? Thanks very much! ZB
-
Mismatch between the MD04 and VL10 tcodes.
Hello Gurus, There is a Mismatch between the MD04 and VL10 tcodes. We can see an entry in the VL10 transaction which we couldn't find in the MD04. Please note that there is no dschedule line for that date in the LU aggremen
-
Well , i got a mac a few months back , April to be exact , so , its still under warranty ... ..either way , whenever i turn on the mac , it comes to the loading screen :the apple logo appears and the loading sign some ....and it keeps loading and doe
-
Downloaded Lightroom CC and it will not open
Downloaded Lightroom CC 2015 and it will not open?