Multiplication Table with Two Nested For Loops
I am trying to code a multiplication table in which the user enters the number of rows between 2 and 10 and enters the number of columns from 2 to 10. This must be in nested for loop format somewhat like this:
rows has been assigned the input variable for rows and columns is the name for input value for columns
for (int i = 1; i <=rows; i++)
for (int j = 1; j <=columns; j++)
i * j
i can't figure out how to get it to print out in table format or if the calculation coding is correct. can anyone help me please?
it should look like this for rows is 4 and columns is 7
1 2 3 4 5 6 7
2 4 6 8 10 12 14
3 6 9 12 15 18 21
4 8 12 16 20 24 28
Edited by: hatecodingsomuch on Feb 22, 2009 8:15 PM
hatecodingsomuch wrote:
I refuse to ask for help from people who are acting like they are all-knowing and unwilling to help someone, considering I am asking for help...to learn. Obviously I am not understanding java very well and I don't need to be ridiculed like this from members who are supposed to help "NEW TO JAVA" individuals. Get off your high horse or get off the website. I will never use this again.Good luck with that.
You do seem to be yet another "do my homework for me" type of flunkie. I predict you'll soon have an epiphany that software development really isn't for you.
I hope you know how to say "Do you want fries with that, sir?" better than the next guy so you can edge him out.
Similar Messages
-
I want to recreate the method drawRect with a nested for-loop
I have absolutely no idea how to start to create a method that will draw an unfilled rect. on the picture instantiated.
The constructor of the class eats the following parameters:
int width, int height
I have the Color class imported and I use the usual parameters:
int xStartingPt, int yStartingPt, int width, int height, Color color
Please help me get started.And when you have a specific question, post you code and ask it.
Read the tutorial as suggested, you don't "draw onto the image". If you do a quick check of the API for Image or BufferedImage, you'll very soon come to that conclusion. -
Issues with nested for loops - saving images from a camera
Hi all,
I've written a vi. to capture a specific number of images ('Image No') and save these images, outputted to a folder of my choice. Each image is identified sequentially. However, I wish to do a number of iterations ('Run') of this capture sequence, such that the filename of each image would be 'Filename (Run)_(Image No).png', e.g. run 5, image 10 would be 'Filename 5_10.png'. I have tried a nested for loop for this but I receive an error 'Asynchronous I/O operation in progress' (I've attached a printscreen).
Can anyone assist me in solving this problem? I preiously posted this in machine Vision but got no response (http://forums.ni.com/t5/Machine-Vision/Capturing-image-sequences-issues-with-nested-for-loops/m-p/19...). Please find attached my vi.
Kindest regards and thanks,
Miika
Solved!
Go to Solution.
Attachments:
Labview problem.jpg 3841 KB
Image sequence save to file.vi 48 KBMiika,
the problem is not the filenam, but the name of the folder (AHHHHH!). You try to create the same folder in the outer for loop over and over again.... (it is the error message above the '======', not below )
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it. -
Capturing image sequences - issues with nested for loops
Hi all,
I've written a vi. to capture a specific number of images ('Image No') and save these images, outputted to a folder of my choice. Each image is identified sequentially. However, I wish to do a number of iterations ('Run') of this capture sequence, such that the filename of each image would be 'Filename (Run)_(Image No).png', e.g. run 5, image 10 would be 'Filename 5_10.png'. I have tried a nested for loop for this but I receive an error 'Asynchronous I/O operation in progress' (I've attached a printscreen).
Can anyone assist me in solving this problem? Please find attached my vi.
Kindest regards and thanks,
Miika
Solved!
Go to Solution.
Attachments:
Image sequence save to file.vi 48 KB
Labview problem.jpg 3841 KBHi,
You cannot create a folder if this one is already existing.
Just check that the folder exists before creating it.
Regards -
PL/SQL block to create temporary table + load via cursor for loop
Assume I have a table that contains a subset of data that I want to load into a temporary table within a cursor for-loop. Is it possible to have a single statement to create the table and load based on the results of the fetch?
I was thinking something like:
Declare CURSOR xyz is
CREATE TABLE temp_table as
select name, rank, serial number from
HR table where rank = 'CAPTAIN'
BEGIN
OPEN xyz
for name in xyz
LOOP
END LOOP
What I see wrong with this is that the table would be created multiple times which is why this syntax is not acceptable. I'd prefer not to have to define the temporary table then load in two sepearte SQL statements and am hoping a single statement can be used.
Thanks!What is the goal here?
If you're just going to iterate over the rows that are returned in a cursor, a temporary table is unnecessary and only adds complexity. If you truly need a temporary table, you would declare it exactly once, at install time when you create all your other tables. You'd INSERT data into the temp table and the data would only be visible to the session that inserted it.
Justin -
Interrupting Nested For Loops/Sequences
I have a lagre program consisting of nested for loops and case statements calibrating an array of patch antennas. The entire process of which will take about 15 hours. During this time, I want to have two things happen.
Every 20 minuites or so, I want the process to stop what it's doing, follow certain commands for the measurement equipment to recalibrate itself, and then go back to what it was doing.
I also want to protect it against unpredicted and predicted crashes. If the system needs to stop for whatever reason, I would like to be able to pick up the process where it left off. A sort of checkpoint system, where, when it passes a checkpoint, if it needs to be restarted, I can tell it to start from the last checkpoint it passed.
Anyone had any experiece with these types of problems?jaysmall wrote:
I also want to protect it against unpredicted and predicted crashes. If the system needs to stop for whatever reason, I would like to be able to pick up the process where it left off. A sort of checkpoint system, where, when it passes a checkpoint, if it needs to be restarted, I can tell it to start from the last checkpoint it passed.
Could you open and append parameters to a file? Every time you restart execution of the vi after crashes you can look through the contents of the file to determine the last operation that was successful and continue with the last know good settings. -SS -
Sorry to bother you all, but I have a small problem with my java homework.
I have to make a nested for loop to produce the following output:
00
10 11
20 21 22
30 31 32 33
(only goes from 0 to 3)
Now, all I have managed to do are two simple loops, one with increment 10 and the other with increment just ++.
Could you help me?Think through this logically. You need two loops. You need this output:
00
10 11
20 21 22
30 31 32 33
Each number above has two digits (two digits, two loops...not a coincidence). So you need one loop to control the first digit, and another loop to control the second digit. Look at the values for the first digit: 0,1,2,3. Those are your first loop values. Now, each time the first loop has a value, your second loop goes through all of its values. Here's the values you need:
First iteration:
loop index 1: 0
loop index 2: 0
Second iteration:
loop index 1: 1
loop index 2: 0,1
Third Iteration:
loop index 1: 2
loop index 2: 0,1,2
Fourth Iteration:
loop index 1: 3
loop index 2: 0,1,2,3
Notice the pattern for loop 2? Look at the starting value for each iteration, and notice the ending value. That gives you your loop constraints. -
Replace the following open/fetch/close statements with a cursor FOR loop
Hi anyone could you please help me,
I would like to replace the following open/fetch/close statements with a cursor FOR loop.
Codes are:
CREATE OR REPLACE PROCEDURE COMOES.orchid_shipment_interface IS
-- get the com shipment header records
CURSOR c_com_shphdr ( p_dwn_end_dt DATE ) IS
SELECT custno client_id
, plheadno plheadno
, DECODE(carr_no,'FEDX',lading_no,'UPS',lading_no,carrier_pro_no) tracking_no
, carr_no||'/'||carr_method carrier_id
, plantid plant_id
, carr_no
, lading_no
, del_custaddr ship_to_id
, ol_type cfm_order_type
, del_custno
, shipterm freight_terms
, del_custattn attn_line
, custaddr
FROM com_plhead@com_pricing.world
WHERE status = '9'
AND (mod_dat) > p_dwn_end_dt;
-- get the com shipment address records
CURSOR c_com_shpadr (p_custaddr VARCHAR2) IS
SELECT name1 addr_name
, street1 addr_line1
, street2 addr_line2
, city city
, state state_cd
, zip zip
, country country_cd
, phone work_phone
, email email1
FROM com_address@com_pricing.world
WHERE addr_id = p_custaddr;
-- get the com shipment detail records
CURSOR c_com_shpdtl ( p_plheadno NUMBER) IS
SELECT pll.plheadno pllheadno
, pll.pllineno ord_line_no
, pll.ol_no erp_line_no
, pll.ol_segno
, pll.fg_id sku
, pll.qty_shipped ship_qty
, pll.ordno erp_ord_no
FROM com_plline@com_pricing.world pll
WHERE pll.plheadno = p_plheadno
AND NOT EXISTS (SELECT '1'
FROM com_pkg_int_interface@com_pricing.world cpi
WHERE pll.ordno = cpi.ordno
AND pll.ol_no = cpi.ol_no);
-- type declaration
-- type declaration of com table.
TYPE t_com_shphdr IS TABLE OF c_com_shphdr%ROWTYPE INDEX BY BINARY_INTEGER;
TYPE t_orchid_shphdr IS TABLE OF orchid_shipment_hdr_intf%ROWTYPE INDEX BY BINARY_INTEGER;
TYPE t_com_shpadr IS TABLE OF c_com_shpadr%ROWTYPE INDEX BY BINARY_INTEGER;
TYPE t_orchid_shpadr IS TABLE OF orchid_shipment_address_intf%ROWTYPE INDEX BY BINARY_INTEGER;
TYPE t_com_shpdtl IS TABLE OF c_com_shpdtl%ROWTYPE INDEX BY BINARY_INTEGER;
TYPE t_orchid_shpdtl IS TABLE OF orchid_shipment_dtl_intf%ROWTYPE INDEX BY BINARY_INTEGER;
lv_company_code com_customer.business_unit%TYPE;
lv_erp_ord_no com_plline.ordno%TYPE;
lv_actual_ship_date com_plline.confirm_date%TYPE;
lv_po_no com_oline.po_no%TYPE;
lv_ord_date com_oline.entrydate%TYPE;
lv_hdr_batch_ctrl_no download_batch_info.batch_ctrl_no%TYPE;
lv_adr_batch_ctrl_no download_batch_info.batch_ctrl_no%TYPE;
lv_dtl_batch_ctrl_no download_batch_info.batch_ctrl_no%TYPE;
lv_sku_desc com_salesitem.title%TYPE;
lv_ord_qty com_oldelseg.qty%TYPE;
lr_com_shphdr t_com_shphdr;
lr_orchid_shphdr t_orchid_shphdr;
lr_com_shpadr t_com_shpadr;
lr_orchid_shpadr t_orchid_shpadr;
lr_com_shpdtl t_com_shpdtl;
lr_orchid_shpdtl t_orchid_shpdtl;
-- variable declaration
ln_shphdr_seq NUMBER(10):= 0;
ln_shpadr_seg NUMBER(10):= 0;
ln_shpdtl_seq NUMBER(10):= 0;
cnt NUMBER(10):= 0;
cnt1 NUMBER(10):= 0;
ld_hdr_dwn_end_dt download_batch_info.download_end_tstamp%TYPE;
lc_hdr_dwn_status download_batch_info.dwn_status%TYPE;
ld_hdr_download_end_tstamp DATE;
ln_hdr_running_seq NUMBER(10) := 0;
ld_adr_dwn_end_dt download_batch_info.download_end_tstamp%TYPE;
lc_adr_dwn_status download_batch_info.dwn_status%TYPE;
ld_adr_download_end_tstamp DATE;
ln_adr_running_seg NUMBER(10) := 0;
ld_dtl_dwn_end_dt download_batch_info.download_end_tstamp%TYPE;
lc_dtl_dwn_status download_batch_info.dwn_status%TYPE;
ld_dtl_download_end_tstamp DATE;
ln_dtl_running_seq NUMBER(10) := 0;
BEGIN
-- get the batch control number details from batch information table for shipment header
BEGIN
SELECT batch_ctrl_no
, NVL(download_end_tstamp,TO_DATE('01/01/1980','MM/DD/YYYY'))
, dwn_status
INTO lv_hdr_batch_ctrl_no
, ld_hdr_dwn_end_dt
, lc_hdr_dwn_status
FROM comoes.download_batch_info
WHERE download_id = 'ORCHID_SHIPMENT_HDR_INTF';
EXCEPTION
WHEN NO_DATA_FOUND THEN
DBMS_OUTPUT.PUT_LINE (' No Data Found for ORCHID_SHIPMENT_HDR_INTF in Download Batch Info table...!!!');
RAISE;
WHEN TOO_MANY_ROWS THEN
DBMS_OUTPUT.PUT_LINE (' Too Many Rows found for ORCHID_SHIPMENT_HDR_INTF in Download Batch Info table...!!!');
RAISE;
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE (' Following error occured while getting batch control number for ORCHID_SHIPMENT_HDR_INTF in Download Batch Info table...!!!'||SQLERRM);
RAISE;
END;
-- get the batch control number details from batch information table for shipment address
BEGIN
SELECT batch_ctrl_no
, NVL(download_end_tstamp,TO_DATE('01/01/1980','MM/DD/YYYY'))
, dwn_status
INTO lv_adr_batch_ctrl_no
, ld_adr_dwn_end_dt
, lc_adr_dwn_status
FROM comoes.download_batch_info
WHERE download_id = 'ORCHID_SHIPMENT_ADDRESS_INTF';
EXCEPTION
WHEN NO_DATA_FOUND THEN
DBMS_OUTPUT.PUT_LINE (' No Data Found for ORCHID_SHIPMENT_ADDRESS_INTF in Download Batch Info table...!!!');
RAISE;
WHEN TOO_MANY_ROWS THEN
DBMS_OUTPUT.PUT_LINE (' Too Many Rows found for ORCHID_SHIPMENT_ADDRESS_INTF in Download Batch Info table...!!!');
RAISE;
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE (' Following error occured while getting batch control number for ORCHID_SHIPMENT_ADDRESS_INTF in Download Batch Info table...!!!'||SQLERRM);
RAISE;
END;
-- get the batch control number details from batch information table for shipment details
BEGIN
SELECT batch_ctrl_no
, NVL(download_end_tstamp,TO_DATE('01/01/1980','MM/DD/YYYY'))
, dwn_status
INTO lv_dtl_batch_ctrl_no
, ld_dtl_dwn_end_dt
, lc_dtl_dwn_status
FROM download_batch_info
WHERE download_id = 'ORCHID_SHIPMENT_DTL_INTF';
EXCEPTION
WHEN NO_DATA_FOUND THEN
DBMS_OUTPUT.PUT_LINE (' No Data Found for ORCHID_SHIPMENT_DTL_INTF in Download Batch Info table...!!!');
RAISE;
WHEN TOO_MANY_ROWS THEN
DBMS_OUTPUT.PUT_LINE (' Too Many Rows found for ORCHID_SHIPMENT_DTL_INTF in Download Batch Info table...!!!');
RAISE;
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE (' Following error occured while getting batch control number for ORCHID_SHIPMENT_DTL_INTF in Download Batch Info table...!!!'||SQLERRM);
RAISE;
END;
-- if previous run is not sucess then do nothing and return.
OPEN c_com_shphdr ( ld_hdr_dwn_end_dt ) ;
LOOP
-- delete the collection for every cycle
lr_com_shphdr.DELETE;
lr_orchid_shphdr.DELETE;
lr_com_shpadr.DELETE;
lr_orchid_shpadr.DELETE;
lr_com_shpdtl.DELETE;
lr_orchid_shpdtl.DELETE;
-- fetch the order header records to collection
FETCH c_com_shphdr BULK COLLECT INTO lr_com_shphdr LIMIT 500;
-- where there is no record in the collection the exit from the loop
EXIT WHEN lr_com_shphdr.COUNT = 0;
-- build your logic there to populate the data into order header collection.
FOR i IN 1..lr_com_shphdr.COUNT
LOOP
-- accumulate header running sequence number
ln_hdr_running_seq := ln_hdr_running_seq + 1;
ln_shphdr_seq := ln_hdr_running_seq;
-- Get the business unit for the customer from com_customer
BEGIN
SELECT business_unit
INTO lv_company_code
FROM com_customer@com_pricing.world
WHERE custno = lr_com_shphdr(i).del_custno;
EXCEPTION
WHEN OTHERS THEN
lv_company_code := NULL;
END;
-- Get the ordno, confirm_date from COM_PLLINE
BEGIN
SELECT ordno
, confirm_date
INTO lv_erp_ord_no
, lv_actual_ship_date
FROM com_plline@com_pricing.world cpl
WHERE cpl.plheadno = lr_com_shphdr(i).plheadno
AND ROWNUM = 1;
EXCEPTION
WHEN OTHERS THEN
lv_erp_ord_no := NULL;
lv_actual_ship_date := NULL;
END;
-- Get the po_no, Entry_date from COM_OLINE
BEGIN
SELECT po_no
, entrydate
INTO lv_po_no
, lv_ord_date
FROM com_oline@com_pricing.world col
WHERE col.ordno = lv_erp_ord_no
AND ROWNUM = 1;
EXCEPTION
WHEN OTHERS THEN
lv_po_no := NULL;
lv_ord_date := NULL;
END;
-- To assign the Bol Number from Lading Number
IF lr_com_shphdr(i).carr_no NOT IN ('FEDX','UPS') THEN
lr_orchid_shphdr(i).bol_no := lr_com_shphdr(i).lading_no;
ELSE
lr_orchid_shphdr(i).bol_no := NULL;
END IF;
-- For each order header get the Shipment Delivery Adderss
OPEN c_com_shpadr ( lr_com_shphdr(i).custaddr);
FETCH c_com_shpadr BULK COLLECT INTO lr_com_shpadr;
-- where there is no record in the collection the exit from the loop
EXIT WHEN lr_com_shpadr.COUNT = 0;
-- biuld your logic here to populate the del address collection.
FOR j IN 1..lr_com_shpadr.COUNT
LOOP
-- accumulate the loop count into temp variable, so that will through tell each set of order header.
cnt := cnt + 1;
-- accumolate the header running sequence number.
ln_adr_running_seg := ln_adr_running_seg + 1;
ln_shpadr_seg := ln_adr_running_seg;
-- move the order address data into collection.
lr_orchid_shpadr(cnt).client_id := lr_com_shphdr(i).del_custno;
lr_orchid_shpadr(cnt).ord_no := lr_com_shphdr(i).plheadno;
lr_orchid_shpadr(cnt).tracking_no := lr_com_shphdr(i).tracking_no;
lr_orchid_shpadr(cnt).addr_name := lr_com_shpadr(j).addr_name;
lr_orchid_shpadr(cnt).attn_line := lr_com_shphdr(i).attn_line;
lr_orchid_shpadr(cnt).addr_line1 := lr_com_shpadr(j).addr_line1;
lr_orchid_shpadr(cnt).addr_line2 := lr_com_shpadr(j).addr_line2;
lr_orchid_shpadr(cnt).addr_line3 := NULL;
lr_orchid_shpadr(cnt).addr_line4 := NULL;
lr_orchid_shpadr(cnt).addr_line5 := NULL;
lr_orchid_shpadr(cnt).city := lr_com_shpadr(j).city;
lr_orchid_shpadr(cnt).state_cd := lr_com_shpadr(j).state_cd;
lr_orchid_shpadr(cnt).zip := lr_com_shpadr(j).zip;
lr_orchid_shpadr(cnt).zip_ext := NULL;
lr_orchid_shpadr(cnt).country_cd := lr_com_shpadr(j).country_cd;
lr_orchid_shpadr(cnt).tax_geo_cd := NULL;
lr_orchid_shpadr(cnt).work_phone := lr_com_shpadr(j).work_phone;
lr_orchid_shpadr(cnt).email1 := lr_com_shpadr(j).email1;
lr_orchid_shpadr(cnt).cre_dat := SYSDATE;
lr_orchid_shpadr(cnt).cre_usr := USER;
lr_orchid_shpadr(cnt).batch_ctrl_no := lv_adr_batch_ctrl_no;
END LOOP;
CLOSE c_com_shpadr;
-- For each order header get the order detail/delivery segment data
OPEN c_com_shpdtl ( lr_com_shphdr(i).plheadno );
FETCH c_com_shpdtl BULK COLLECT INTO lr_com_shpdtl;
-- where there is no record in the collection the exit from the loop
EXIT WHEN lr_com_shpdtl.COUNT = 0;
-- build your logic here to populate the order detail collection
FOR k IN 1..lr_com_shpdtl.COUNT
LOOP
-- accumulate the loop count into a temp variable, so that will through till each set of Order Header.
cnt1 := cnt1 + 1;
-- accumulate header running sequence number
ln_dtl_running_seq := ln_dtl_running_seq + 1;
ln_shpdtl_seq := ln_dtl_running_seq;
-- Get Quantity for the delvery from delevery segment table.
BEGIN
SELECT NVL(Qty,0)
INTO lv_ord_qty
FROM com_oldelseg@com_pricing.world cds
WHERE cds.ordno = lr_com_shpdtl(k).erp_ord_no
AND cds.ol_no = lr_com_shpdtl(k).erp_line_no
AND cds.ol_segno = lr_com_shpdtl(k).ol_segno;
EXCEPTION
WHEN OTHERS THEN
lv_ord_qty := NULL;
END;
-- Get Title for the salesitem from the salesitem table.
BEGIN
SELECT Title
INTO lv_sku_desc
FROM com_salesitem@com_pricing.world cs
WHERE cs.fg_id = lr_com_shpdtl(k).sku;
EXCEPTION
WHEN OTHERS THEN
lv_sku_desc := NULL;
END;
-- move the Order detail data into collection
lr_orchid_shpdtl(cnt1).client_id := lr_com_shphdr(i).client_id;
lr_orchid_shpdtl(cnt1).ord_no := lr_com_shphdr(i).plheadno;
lr_orchid_shpdtl(cnt1).ord_line_no := lr_com_shpdtl(k).ord_line_no;
lr_orchid_shpdtl(cnt1).erp_line_no := lr_com_shpdtl(k).erp_line_no;
lr_orchid_shpdtl(cnt1).sku := lr_com_shpdtl(k).sku;
lr_orchid_shpdtl(cnt1).tracking_no := lr_com_shphdr(i).tracking_no;
lr_orchid_shpdtl(cnt1).container_no := NULL;
lr_orchid_shpdtl(cnt1).ord_qty := lv_ord_qty;
lr_orchid_shpdtl(cnt1).ship_qty := lr_com_shpdtl(k).ship_qty;
lr_orchid_shpdtl(cnt1).price_point := NULL;
lr_orchid_shpdtl(cnt1).pick_invoice_no := NULL;
lr_orchid_shpdtl(cnt1).cancel_qty := NULL;
lr_orchid_shpdtl(cnt1).bldg_id := NULL; --lr_com_shpdtl(k).bldg_id;
lr_orchid_shpdtl(cnt1).sku_company := NULL; --lr_com_shpdtl(k).sku_company;
lr_orchid_shpdtl(cnt1).sku_desc := lv_sku_desc;
lr_orchid_shpdtl(cnt1).icc_cd1 := NULL; --lr_com_shpdtl(k).icc_cd1;
lr_orchid_shpdtl(cnt1).erp_ord_no := lr_com_shpdtl(k).erp_ord_no;
lr_orchid_shpdtl(cnt1).cre_dat := SYSDATE;
lr_orchid_shpdtl(cnt1).cre_usr := USER;
lr_orchid_shpdtl(cnt1).batch_ctrl_no := lv_dtl_batch_ctrl_no;
END LOOP;
CLOSE c_com_shpdtl;
-- build the logic to populate Order Header
lr_orchid_shphdr(i).client_id := lr_com_shphdr(i).client_id;
lr_orchid_shphdr(i).ord_no := lr_com_shphdr(i).plheadno;
lr_orchid_shphdr(i).tracking_no := lr_com_shphdr(i).tracking_no;
lr_orchid_shphdr(i).container_no := NULL; -- container number is not maintained in COM
lr_orchid_shphdr(i).carrier_id := lr_com_shphdr(i).carrier_id;
lr_orchid_shphdr(i).plant_id := lr_com_shphdr(i).plant_id;
lr_orchid_shphdr(i).erp_ord_no := lv_erp_ord_no;
lr_orchid_shphdr(i).erp_ord_no2 := NULL;
lr_orchid_shphdr(i).po_no := lv_po_no;
lr_orchid_shphdr(i).ship_to_id := lr_com_shphdr(i).ship_to_id;
lr_orchid_shphdr(i).ship_to_addr_id := lr_com_shphdr(i).custaddr;
lr_orchid_shphdr(i).scac := NULL; --lr_com_shphdr(i).scac;
lr_orchid_shphdr(i).actual_ship_date := lv_actual_ship_date;
lr_orchid_shphdr(i).cfm_order_type := lr_com_shphdr(i).cfm_order_type;
lr_orchid_shphdr(i).company_code := lv_company_code;
lr_orchid_shphdr(i).no_of_order_lines := NULL; --lr_com_shphdr(i).no_of_order_lines;
lr_orchid_shphdr(i).pick_invoice_no := NULL;
lr_orchid_shphdr(i).ord_date := lv_ord_date;
lr_orchid_shphdr(i).orig_tender_date := NULL;
lr_orchid_shphdr(i).orig_delv_date := NULL;
lr_orchid_shphdr(i).delivery_flag := NULL;
lr_orchid_shphdr(i).delv_date_from := NULL;
lr_orchid_shphdr(i).delv_date_to := NULL;
lr_orchid_shphdr(i).orig_carr_cd := NULL;
lr_orchid_shphdr(i).routing_comment := NULL;
lr_orchid_shphdr(i).segment_type := NULL;
lr_orchid_shphdr(i).back_order_flag := NULL;
lr_orchid_shphdr(i).addr_override_flag := NULL;
lr_orchid_shphdr(i).fmx_assigned_carr := NULL;
lr_orchid_shphdr(i).fmx_assigned_ship_date := NULL;
lr_orchid_shphdr(i).fmx_assigned_delv_date := NULL;
lr_orchid_shphdr(i).freight_terms := lr_com_shphdr(i).freight_terms;
lr_orchid_shphdr(i).fmx_load_id := NULL;
lr_orchid_shphdr(i).asn_type := NULL;
lr_orchid_shphdr(i).icc_cd1 := NULL; --lr_com_shphdr(i).icc_cd1;
lr_orchid_shphdr(i).trans_type := NULL;
lr_orchid_shphdr(i).ref_no1 := NULL;
lr_orchid_shphdr(i).ref_no2 := NULL;
lr_orchid_shphdr(i).ref_no3 := NULL;
lr_orchid_shphdr(i).ref_no4 := NULL;
lr_orchid_shphdr(i).cre_dat := SYSDATE;
lr_orchid_shphdr(i).cre_usr := USER;
lr_orchid_shphdr(i).batch_ctrl_no := lv_hdr_batch_ctrl_no;
-- logic to get total boxes and weight.
BEGIN
SELECT SUM(no_cartons), SUM(weight)
INTO lr_orchid_shphdr(i).total_boxes
, lr_orchid_shphdr(i).weight
FROM com_plline@com_pricing.world pll
WHERE pll.plheadno = lr_com_shphdr(i).plheadno;
EXCEPTION
WHEN OTHERS THEN
lr_orchid_shphdr(i).total_boxes := NULL;
lr_orchid_shphdr(i).weight := NULL;
END;
END LOOP;
-- initialize the variables for next loop cycle.
cnt := 0;
cnt1 := 0;
-- populate the shipment header interface table.
FOR x IN 1..lr_orchid_shphdr.COUNT
LOOP
ld_hdr_download_end_tstamp := lr_orchid_shphdr(x).cre_dat;
INSERT INTO orchid_shipment_hdr_intf
(record_qualifier
,client_id
,ord_no
,tracking_no
,container_no
,bol_no
,carrier_id
,plant_id
,erp_ord_no
,erp_ord_no2
,po_no
,ship_to_id
,ship_to_addr_id
,scac
,actual_ship_date
,cfm_order_type
,company_code
,no_of_order_lines
,pick_invoice_no
,total_boxes
,weight
,ord_date
,orig_tender_date
,orig_delv_date
,delivery_flag
,delv_date_from
,delv_date_to
,orig_carr_cd
,routing_comment
,segment_type
,back_order_flag
,addr_override_flag
,fmx_assigned_carr
,fmx_assigned_ship_date
,fmx_assigned_delv_date
,freight_terms
,fmx_load_id
,asn_type
,upl_status
,icc_cd1
,trans_type
,ref_no1
,ref_no2
,ref_no3
,ref_no4
,cre_dat
,cre_usr
,batch_ctrl_no)
VALUES
( 10
,lr_orchid_shphdr(x).client_id
,lr_orchid_shphdr(x).ord_no
,lr_orchid_shphdr(x).tracking_no
,lr_orchid_shphdr(x).container_no
,lr_orchid_shphdr(x).bol_no
,lr_orchid_shphdr(x).carrier_id
,lr_orchid_shphdr(x).plant_id
,lr_orchid_shphdr(x).erp_ord_no
,lr_orchid_shphdr(x).erp_ord_no2
,lr_orchid_shphdr(x).po_no
,lr_orchid_shphdr(x).ship_to_id
,lr_orchid_shphdr(x).ship_to_addr_id
,lr_orchid_shphdr(x).scac
,lr_orchid_shphdr(x).actual_ship_date
,lr_orchid_shphdr(x).cfm_order_type
,lr_orchid_shphdr(x).company_code
,lr_orchid_shphdr(x).no_of_order_lines
,lr_orchid_shphdr(x).pick_invoice_no
,lr_orchid_shphdr(x).total_boxes
,lr_orchid_shphdr(x).weight
,lr_orchid_shphdr(x).ord_date
,lr_orchid_shphdr(x).orig_tender_date
,lr_orchid_shphdr(x).orig_delv_date
,lr_orchid_shphdr(x).delivery_flag
,lr_orchid_shphdr(x).delv_date_from
,lr_orchid_shphdr(x).delv_date_to
,lr_orchid_shphdr(x).orig_carr_cd
,lr_orchid_shphdr(x).routing_comment
,lr_orchid_shphdr(x).segment_type
,lr_orchid_shphdr(x).back_order_flag
,lr_orchid_shphdr(x).addr_override_flag
,lr_orchid_shphdr(x).fmx_assigned_carr
,lr_orchid_shphdr(x).fmx_assigned_ship_date
,lr_orchid_shphdr(x).fmx_assigned_delv_date
,lr_orchid_shphdr(x).freight_terms
,lr_orchid_shphdr(x).fmx_load_id
,lr_orchid_shphdr(x).asn_type
,00
,lr_orchid_shphdr(x).icc_cd1
,lr_orchid_shphdr(x).trans_type
,lr_orchid_shphdr(x).ref_no1
,lr_orchid_shphdr(x).ref_no2
,lr_orchid_shphdr(x).ref_no3
,lr_orchid_shphdr(x).ref_no4
,lr_orchid_shphdr(x).cre_dat
,lr_orchid_shphdr(x).cre_usr
,lr_orchid_shphdr(x).batch_ctrl_no);
END LOOP;
-- populate the shipment address interface table.
FOR y IN 1..lr_orchid_shpadr.COUNT
LOOP
ld_adr_download_end_tstamp := lr_orchid_shpadr(y).cre_dat;
INSERT INTO orchid_shipment_address_intf
( record_qualifier
, client_id
, ord_no
, tracking_no
, addr_name
, attn_line
, addr_line1
, addr_line2
, addr_line3
, addr_line4
, addr_line5
, city
, state_cd
, zip
, zip_ext
, country_cd
, tax_geo_cd
, work_phone
, email1
, cre_dat
, cre_usr
, batch_ctrl_no)
VALUES ( 14
, lr_orchid_shpadr(y).client_id
, lr_orchid_shpadr(y).ord_no
, lr_orchid_shpadr(y).tracking_no
, lr_orchid_shpadr(y).addr_name
, lr_orchid_shpadr(y).attn_line
, lr_orchid_shpadr(y).addr_line1
, lr_orchid_shpadr(y).addr_line2
, lr_orchid_shpadr(y).addr_line3
, lr_orchid_shpadr(y).addr_line4
, lr_orchid_shpadr(y).addr_line5
, lr_orchid_shpadr(y).city
, lr_orchid_shpadr(y).state_cd
, lr_orchid_shpadr(y).zip
, lr_orchid_shpadr(y).zip_ext
, lr_orchid_shpadr(y).country_cd
, lr_orchid_shpadr(y).tax_geo_cd
, lr_orchid_shpadr(y).work_phone
, lr_orchid_shpadr(y).email1
, lr_orchid_shpadr(y).cre_dat
, lr_orchid_shpadr(y).cre_usr
, lr_orchid_shpadr(y).batch_ctrl_no);
END LOOP;
-- populate the shipment detail interface table.
FOR z IN 1..lr_orchid_shpdtl.COUNT
LOOP
ld_dtl_download_end_tstamp := lr_orchid_shpdtl(z).cre_dat;
INSERT INTO orchid_shipment_dtl_intf
( record_qualifier
, client_id
, ord_no
, ord_line_no
, erp_line_no
, sku
, tracking_no
, container_no
, ord_qty
, ship_qty
, price_point
, pick_invoice_no
, cancel_qty
, bldg_id
, sku_company
, sku_desc
, icc_cd1
, erp_ord_no
, cre_dat
, cre_usr
, batch_ctrl_no)
VALUES ( 20
, lr_orchid_shpdtl(z).client_id
, lr_orchid_shpdtl(z).ord_no
, lr_orchid_shpdtl(z).ord_line_no
, lr_orchid_shpdtl(z).erp_line_no
, lr_orchid_shpdtl(z).sku
, lr_orchid_shpdtl(z).tracking_no
, lr_orchid_shpdtl(z).container_no
, lr_orchid_shpdtl(z).ord_qty
, lr_orchid_shpdtl(z).ship_qty
, lr_orchid_shpdtl(z).price_point
, lr_orchid_shpdtl(z).pick_invoice_no
, lr_orchid_shpdtl(z).cancel_qty
, lr_orchid_shpdtl(z).bldg_id
, lr_orchid_shpdtl(z).sku_company
, lr_orchid_shpdtl(z).sku_desc
, lr_orchid_shpdtl(z).icc_cd1
, lr_orchid_shpdtl(z).erp_ord_no
, lr_orchid_shpdtl(z).cre_dat
, lr_orchid_shpdtl(z).cre_usr
, lr_orchid_shpdtl(z).batch_ctrl_no);
END LOOP;
COMMIT;
END LOOP;
CLOSE c_com_shphdr;
-- set the status to success
UPDATE comoes.download_batch_info
SET batch_ctrl_no = orchid_plhead_btch_ctrl_seq.NEXTVAL
, dwn_status = '90'
, download_end_tstamp = NVL(ld_hdr_download_end_tstamp,SYSDATE)
WHERE download_id = 'ORCHID_SHIPMENT_HDR_INTF'
AND batch_ctrl_no = lv_hdr_batch_ctrl_no;
UPDATE comoes.download_batch_info
SET batch_ctrl_no = orchid_address_btch_ctrl_seq.NEXTVAL
, dwn_status = '90'
, download_end_tstamp = NVL(ld_hdr_download_end_tstamp,SYSDATE)
WHERE download_id = 'ORCHID_SHIPMENT_ADDRESS_INTF'
AND batch_ctrl_no = lv_adr_batch_ctrl_no;
UPDATE comoes.download_batch_info
SET batch_ctrl_no = orchid_plline_btch_ctrl_seq.NEXTVAL
, dwn_status = '90'
, download_end_tstamp = NVL(ld_dtl_download_end_tstamp,SYSDATE)
WHERE download_id = 'ORCHID_SHIPMENT_DTL_INTF'
AND batch_ctrl_no = lv_dtl_batch_ctrl_no;
-- Update the download status to success in the interface table.
-- Shipment Header
COMMIT;
EXCEPTION
WHEN OTHERS THEN
-- load is not sucess then set the status to fail
UPDATE comoes.download_batch_info
SET dwn_status = '99'
WHERE download_id = 'ORCHID_SHIPMENT_HDR_INTF'
AND batch_ctrl_no = lv_hdr_batch_ctrl_no;
UPDATE comoes.download_batch_info
SET dwn_status = '99'
WHERE download_id = 'ORCHID_SHIPMENT_ADDRESS_INTF'
AND batch_ctrl_no = lv_adr_batch_ctrl_no;
UPDATE comoes.download_batch_info
SET dwn_status = '99'
WHERE download_id = 'ORCHID_SHIPMENT_DTL_INTF'
AND batch_ctrl_no = lv_dtl_batch_ctrl_no;
COMMIT;
DBMS_OUTPUT.PUT_LINE('Following error occured while executing ORCHID_SHIPMENT_INTF procedure...!!!'||SQLERRM);
RAISE;
END orchid_shipment_interface;Edited by: BluShadow on 03-Aug-2011 13:28
added {noformat}{noformat} tags. Please read {message:id=9360002} to learn to do this yourself. &nbPlease read the Forum FAQ on how to ask a question, particularly how to format code
SQL and PL/SQL FAQ
SQL and PL/SQL FAQ
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE (' Following error occured while getting batch control number for ORCHID_SHIPMENT_HDR_INTF in Download Batch Info table...!!!'||SQLERRM);
RAISE;http://tkyte.blogspot.com/2008/01/why-do-people-do-this.html -
How can i build table with two user name columne ?
How can I build view with two columns for user name ( one create and the other
Can change also )
And to display full name ( the user name is the key but not display ) ?Hi,
Creating View
From initial screen of data dictionary(T.Code: SE11), enter the name of object i.e. view.
Select view radio button and click on the push button.
Dialog box is displayed for types of views.
Select the view type.
On the next screen, you have to pass following parameters.
Short text
In the table box you need to enter the table names, which are to be related.
In join table box you need to join the two tables.
Click on the TABFIELD. System displays the dialog box for all the table fields and user can select the fields from this screen. These fields are displayed in the view fields box.
Save and Activate: When the view is activated, view is automatically created in the underlying database system. As long as the table exists in the database, the view also exists (Unless you delete it).
Regards,
Bhaskar -
Ok I need to have a nested for loop that asks a user to enter in a int number from 1-50. Whatever the number is, lets say 4 I need the program to count up asterisk and count down asterisks, like this.
This is my code:
import java.io.*;
public class Stars {
static int n;
static private InputStreamReader in = new InputStreamReader(System.in);
static private BufferedReader br = new BufferedReader(in);
public static void main(String[] Args)throws IOException
System.out.println("Please enter in a number to see display: ");
String num = br.readLine();
n=Integer.parseInt(num);
for(int i=1;i<=n;i++)
for(int j=1;j<=i;j++)
System.out.print("*");
for(int j=1;j<=i;j--)
System.out.print("*");
System.out.println();
Can someone tell me what I am doing wrong so I can figure out my mistake(s).Ok, well I know that the loop relies on the number entered in by the user. So if i pick 3 the three enter in the loop and counts up in a for loop and for every number it counts up to the three it does a print("*"); Now what I am getting confused about is where the other for loop comes into play. I know that I need to start from the number I have which is 3, so I need to have one less than that and then count down. The thing is that i'm not sure where or how the second for loop gets implemented into the code. Does it get nested with the first loop like this:
for(int i=1;i<=n;i++)
for(int j=1;j<=i;j++)
for(int j=n-1;j>=i;j--)
System.out.print("*");
System.out.println();
}Or is the second for loop on its own like this:
for(int i=1;i<=n;i++)
for(int j=1;j<=i;j++)
System.out.print("*");
for(int j=n-1;j>=i;j--)
System.out.print("*");
System.out.println();
}If someone can help me understand, for this is my first time with nested for loops. -
How to convert the table with separate fields for every period
Hi there,
I have the table in R/3 called COSP. The table contains the separate fields for values of separate reporting periods, let's say Amount01, Amount02 etc. I need to extract this data to BW and load it into ODS, which contains the data like common key figure for amount and info object Fiscal Period. How to extract and tansform the data to be able to load it there?
I mean, how to change the row like:
100 100 200 200....
for rows like:
001 100
002 100
003 200
004 200
I hope you'll help,
KooyotHi,
you need to implement a bit of coding for that.
With the 'do varying' statement abap provides a loop over those fields. Within this loop you can build up a new internal table with one entry for each period and amount.
kind regards
Siggi
PS: I am not very familiar with CO, but I guess there will be a standard extractor for that. -
Hi all Community members,, I am facing problem with pulling attributes from a xml which I have created. I am using nested for loop. Please kindly help me out to solve this problem....
Thanks in advance...
Below is the code & xml ...
import flash.events.Event;
import flash.events.EventDispatcher;
import flash.events.*;
import flash.net.*;
var myXML:XML;
var voiceOver:String;
var startOffset:Number;
var slideData:Array;
var id_cont_array:Array = new Array();
var id_textfield_array:Array = new Array();
var id_image_array:Array = new Array();
var myXML_Container_Length:Number;
var myXML_textField_Length:Number;
var myXML_images_Length:Number;
var loader:URLLoader = new URLLoader();
loader.load(new URLRequest("dynamic.xml"));
loader.addEventListener(Event.COMPLETE,processXML);
function processXML(e:Event):void
slideData=new Array();
myXML = new XML(loader.data);
loader.removeEventListener(Event.COMPLETE, processXML);
loader.removeEventListener(IOErrorEvent.IO_ERROR, loadError);
myXML = new XML(e.target.data);
voiceOver = myXML. @ voice_over;
startOffset = myXML. @ start_offset;
for (var i : uint = 0; i<myXML.*.length(); i++)
//trace(myXML + "slide");
//myXML_List = myXML.children();
myXML_Container_Length = myXML.children().length();
//trace(myXML_Container_Length+ "==myXML_Container_Length")
//myXML_textField_Length = myXML.containerss[0].children().length();
//myXML_images_Length = myXML.children().length();
//trace(myXML.child("containerss")[3]. @ id.toXMLString()+ "==myXML.containerss[0]. @ id;");
//trace(myXML.containerss[0].textfield[0]. @ id+ "==myXML.slide.containerss[0]. @ id");
//trace(myXML.containerss[0].textfield[1]. @ id+ "==myXML.slide.containerss[1]. @ id");
//trace(myXML.containerss[3].image[0]. @ id + "==image[0]");
//trace(myXML.containerss[0].children() + "==myXML.containerss[0].children()");
for (var j:Number=0; j<=myXML_Container_Length; j++)
id_cont_array.push(myXML.containerss[j]. @ id);
//trace(myXML.containerss[j].children().length() + "==j");
myXML_textField_Length = myXML.containerss[j].children().length();
trace(myXML_textField_Length + "==myXML_textField_Length");
for (var k:Number=0; k<=myXML_textField_Length-1; k++)
id_textfield_array.push(myXML.containerss[j].textfield[k]. @ id);
//id_image_array.push(myXML.containerss[k].image[j]. @ id);
trace(id_textfield_array[k] + "==id_textfield_array[k]==" + k + "---j==" + j);
//trace(id_image_array[k] + "==id_image_array");
//trace(id_textfield_array[j]+"==id_cont_array[j]");
//trace(myXML_List.length() + "===myXML_List");
function loadError(e:IOErrorEvent):void
trace("loadError");
/// XML is as given below..
<slide orientation="VERTICAL" voice_over="Slide1.mp3" start_offset="0" margin="">
<containerss id="0" orientation="HORIZONTAL" padding="10" margin="10" x="10" y="160" width="200" height="150">
<textfield id="Text1" text="textfieldText1" padding="10" margin="10" x="10" y="160"/>
<image id="img1" text="" padding="10" margin="10" x="10" y="160"/>
<textfield id="Text2" text="textfieldText2" padding="10" margin="10" x="10" y="160"/>
</containerss>
<containerss id="1" orientation="HORIZONTAL" padding="10" margin="10" width="200" height="200" x="10" y="160">
<textfield id="Text3" text="textfieldText3" padding="10" margin="10" x="10" y="160"/>
<image id="img2" text="" padding="10" margin="10" x="10" y="160"/>
</containerss>
<containerss id="2" orientation="VERTICAL" padding="10" margin="10" width="200" height="150" x="10" y="160">
<textfield id="Text5" text="textfieldText5" padding="10" margin="10" width="200" height="150" x="10" y="160"/>
<image id="img3" text="" padding="10" margin="10" x="10" y="160"/>
<textfield id="Text6" text="textfieldText6" padding="10" margin="10" x="10" y="160"/>
</containerss>
<containerss id="4" orientation="VERTICAL" padding="10" margin="10" width="200" height="150" x="10" y="160">
<textfield id="Text7" text="textfieldText7" padding="10" margin="10" width="200" height="150" x="10" y="160"/>
<image id="img4" text="" padding="10" margin="10" x="10" y="160"/>
<textfield id="Text8" text="textfieldText8" padding="10" margin="10" width="200" height="150" x="10" y="160"/>
</containerss>
</slide>Parsing is totally wrong. You function processXML() should be like that:
function processXML(e:Event):void
slideData = new Array();
loader.removeEventListener(Event.COMPLETE, processXML);
loader.removeEventListener(IOErrorEvent.IO_ERROR, loadError);
myXML = new XML(e.target.data);
voiceOver = myXML.@voice_over;
startOffset = myXML.@start_offset;
myXML_Container_Length = myXML.children().length();
var node:XMLList;
for (var j:Number = 0; j <= myXML_Container_Length - 1; j++)
id_cont_array.push(myXML.containerss[j].@id);
node = myXML.containerss[j].children();
myXML_textField_Length = node.length();
for (var k:Number = 0; k <= myXML_textField_Length - 1; k++)
switch (node[k].name().toString())
case "textfield":
trace(node[k].@id);
id_textfield_array.push(node[k].@id);
break;
case "image":
id_image_array.push(node.@id);
break; -
ACE deployment with two interface for client side
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-fareast-language:EN-US;}
In a ACE router mode deployment, I have a single context configured with two interface for server side and two interface for client side. In this situation how can we meet the demands of customers arriving from both networks? How can the ACE handle the client request if we configure one default-gateway to each network?
Regards,
EgomesEnable "mac-sticky" comand under each client inteface.
It will ensure that ACE sends the response to the MAC address from which the request to the VIP was recieved.
For more details
http://cisco.biz/en/US/docs/interfaces_modules/services_modules/ace/v3.00_A1/command/reference/if.html#wp1033275
HTH
Syed Iftekhar AHmed -
Dynamic Table with two columns
Hi!
i have to create a Dynamic Table with two columns having 5-5 links each with some text...... three links r based on certain conditions....they r visible only if condition is true...
if the links r not visible in this case another links take it's place & fill the cell.
links/text is coming from database.
i am using Struts with JSP IDE netbeans
Please help me
BuntyIndiai wanna do something like this
<div class="box_d box_margin_right">
<ul class="anchor-bullet">
<c:forEach items="${data.faqList}" var="item" varStatus="status"
begin="0" end="${data.faqListSize/2-1}">
<li>${item}</li>
</c:forEach>
</ul>
</div>
<div class="box_d">
<ul class="anchor-bullet">
<c:forEach items="${data.faqList}" var="item" varStatus="status"
begin="${data.faqListSize/2}" end="${data.faqListSize}">
<li>${item}</li>
</c:forEach>
</ul>
</div>
wanna divide table in two columns....if one link got off due to condition other one take it's position...
I have created a textorderedlist
Bunty -
hi all,
I need to implement nested for loop in Xquery, but not able to do. Please help.
Thanks in advance..
RajanNested for loops are simple in Xquery. Here is a very basic example:
Input:
<root>
<FirstLevel>
<SecondLevel>
<Value>1</Value>
</SecondLevel>
<SecondLevel>
<Value>2</Value>
</SecondLevel>
<SecondLevel>
<Value>3</Value>
</SecondLevel>
</FirstLevel>
<FirstLevel>
<SecondLevel>
<Value>4</Value>
</SecondLevel>
<SecondLevel>
<Value>5</Value>
</SecondLevel>
<SecondLevel>
<Value>6</Value>
</SecondLevel>
</FirstLevel>
</root>XQuery:
declare namespace ns0 = "http://temp.uri/OTM";
declare function ns0:NestedForLoop($input as element(*)) as element(*)
<ns0:Output>
for $firstLevel in $input/FirstLevel
for $secondLevel in $firstLevel/SecondLevel
return
<element>{ $secondLevel/Value/text() }</element>
</ns0:Output>
declare variable $input aselement(*) external;
ns0:NestedForLoop($input)Output:
<otm:Output xmlns:otm="http://temp.uri/OTM">
<element>1</element>
<element>2</element>
<element>3</element>
<element>4</element>
<element>5</element>
<element>6</element>
</otm:Output>Of course, this case is very simple and usually you wont even loop for this you can use a simple XPath like $input/FirstLevel/SecondLevel/Value/text() to achieve the above result. So, If you are having problems in a specific case of nested for loops, please post the input and output here and we can help out.
Maybe you are looking for
-
I created a fillable form with drop downs...
and such using the Adobe Forms Central for my business quotes. I created the form, saved it as a pdf, tested the form by going through and filling it out with data, whether it was text, dates, or drop down options, and emailed it. One lady didn't s
-
Hi, It is my understanding that the ability to code ABAP is a key capability of a technical BW consultant. I have no experience in ABAP, but i am familiar with .NET development. Some questions: 1. Is ABAP knowledge such important for a BW consultant?
-
A 6-Hour film Assembly from FCP to DVD. Compression?
Hello! I have a 6-hour assembly of a film that was shot with the Panasonic HVX200 with 35mm film lenses. These are the specs: DVCPRO HD 720p 60; frame size 960x720; 23.98fps; audio rate 48.0 KHz, 16 bit; pixel aspect HD [960x720]. It was cut with Fin
-
We have an issue here in Ciscoworks where in most of the alerts we received from Ciscoworks are delayed. Like last January 22 issues. One of our devices is down and there should be an alert on the same day of incident but we only received the alert l
-
My phone update downloading has stopped on o% & i cant re download it. How can i solve this?