For object RF_BELEG number range does not exist

Hi,
while doing PGI, i get an error For Object RF_BELEG ,number range does not exist in company code ABCD. Where do i create the number range for this. I tried with FBN1 but not useful.
" Diagnosis says, the database table NRIV has the delivery class as C. Make chages in customizing. "
what could be the reason for this error? can anyone help me to fix this error.
i tried to fix it through transaction code 'SNRO' and 'OBA7' but in vain
can anyone help me out

Try Extending the same in VN01 , and assigning it to your relevant document
Cheers

Similar Messages

Number range does not exist error message while releasing billing document

Hi,
We are trying to release a billing document to Accounting through VF02. But the system throws an error message that "For object RF_BELEG 1000, number range interval does not exist FBN1". Note : System does not specify which number range is missing...
There are existing number range intervals for the company code which looks fine. Any advise where this number ranges are missing.
Regards,
Sakthy

Hi,
I suggest you to check the which document type has assigned for biiling document and against that document type , have to ssign the id for number range and check whethere internal assignment or external assignment.
I hope this will make sense.
Panneer

Number range does not exist error while creating shopping cart

Hi,
I am working in SRM 5.0 classic scenario..while creating a shopping cart it gives error as number range 01 does not exist.(while clicking shop button).
Thanks&Regards,
Aravind.

Hi,
Please maintain SC number range and transaction type assignment in SRM SPRO.
--> cross application -> number range
Kind regards,
Yann

For object XABBELEGNR , number range interval does not exist OMJ6

Dear all
I want to enter only the value between 1 to 5 in GR/GI Slip No for T.code Mb01,but it is not allowing it is showing as For object XABBELEGNR , number range interval does not exist OMJ6.
Kindly let me know how to proceed,so that i can enter value between 1 to 5 in that field.
regards
M.Chandra mohan

hi
u just go to tcode omc1.
activate gr/gi slip for plant
then create number range group code and assign it to plant ,storage location and movenent type combination.
Then u can create the intervals thru OMJ6.
Hope it helps
rewrad if useful
Rohit

For Object RV_BELEG, number range SD does not exist

Dear Gurus,
I have created a sales order VA01 with 1 material, and when I try to print the invoice, I have the following message of error:
'For Object RV_BELEG, number range SD does not exist'
I have checked my output types, they have been rightly assigned to the invoice forms.
OK, so If I have to assign number ranges to sales documents, how can I do that? Do I have to talk to FI guys to?
Please help.
Regards
Christian

Thats SD numbeer range that is missing. Each invoice has two numbers one in SD and one in FI.
Just go to SNRO type RV_BELEG and maintain it (the name of the number range you have in your billing document type setup in spro)
Piotr.

For object RV_BELEG , number range interval does not exit

I am receiving this error when trying to generate billing document type L2 for a newly created company code.
Exisiting company codes are generating billing documents so obviously this is to do with a company code related definition.
Any thouhgts ?
-Mark

Please check if the error is
"For object RV_BELEG , number range interval does not exit"
"For object RV_BELEG , number range interval <b>10</b> does not exit"
10 used as an example here you may be getting any 2-digit alpha-numeric value in stead of 10.
Also Check
If you are using
Include program : RV60AFZZ
Routine: USEREXIT_NUMBER_RANGE
If so then for each plant you have assign a number range for each billing type (L2- here).
Thanks,
Ashish

ORA-04043: object SYS.DELTA$SESSION does not exist

Dear Friends
after I import my data by using the follwoing import script :
IMP JCC/P_MANUF FILE =JCC.DMP FULL
and at the end give this message import has been imported succesfully without warning
then when I use this script :
SQL> SELECT TNAME FROM TAB
2 WHERE TNAME LIKE 'USER_SESSION'
3 /
TNAME
USER_SESSION
The table USER_SESSION is exist but when I try to desplay the structure of the USER_SESSION by using this :
SQL> DESC USER_SESSION
ERROR:
ORA-04043: object SYS.DELTA$SESSION does not exist
and when I try to use the select statment as the following
SELECT * FROM USER_SESSION
ERROR at line 1:
ORA-00980: synonym translation is no longer valid
Waiting for your valuable answer.
Best regards
Jamil Alshaibani

SQL> select * from V$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production
PL/SQL Release 11.1.0.6.0 - Production
CORE 11.1.0.6.0 Production
TNS for Linux: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
SQL> !uname -a
Linux KAD-VMWARE 2.6.9-55.ELsmp #1 SMP Fri Apr 20 16:36:54 EDT 2007 x86_64 x86_64 x86_64 GNU/Linux
SQL> sho user
USER is "SYS"
SQL> select object_type,status from dba_objects where object_name = 'K_DRWDWN_GRP' and OWNER = 'SYS';
no rows selected
Is any thing wrong with my dictionary? please let me know if i missed anything?
Edited by: sanora600 on Oct 16, 2010 12:34 AM

Object Category CL_ABAP Class does not exist

Hi Experts,
When Iam creating a workflow tasks or template the object category CL_ABAP Class does not exist in drop down box. Only BOR Business object is appearing. Could anyone help me the problem and how to resolve it.

Jose,
Note: If you are in a 6.20 system and can't see the Object Category choice "ABAP Class", then you first need to execute report SWF_CATID to enable "ABAP Classes" as an available object category. It's already done for you in releases 6.40 and higher.
I am guessing you are in SAP_BASIS 620 version.
Courtesy:
This is from blog written by jocelyn dart of ABAP OO Workflow.
For more details pls check this:
/people/jocelyn.dart/blog/2006/12/19/using-functional-methods-in-workflows-and-tasks
Hope this will help.
Cheers
Jai
PS: Small correction report name is RSWF_CATID not SWF_CATID

Application object BUPA: Table TSADC does not exist

Hi All,
When I try to create a Business Partner in transaction fmcac1, I get the message Application object BUPA: Table TSADC does not exist, especially when I try to go back to the Address tab after clicking on any other tab on that screen. I have tried to add the table in trans BUSG but I don't know what I am supposed to assign as the FM, for example.
I have also used the trans BUSB to try to delete the entry for TSADC but it says 'do not make any changes (SAP Entry.)' Can u pliz assist with the information I have requsted above or prescribe another solution.
Thanx in advance.

For the benefit of others, I was able to solve the problem by removing the entry to the RIGHT, not the WHOLE entry (which refuses becoz it's an SAP entry). This is through transaction BUSB.

M8 140 Acct assgt 01 for order item 45041838 00003 does not exist

Hi experts,
when i am trying to create invoice from BAPI_INCOMINGINVOICE_CREATE ii am getting the following error meesage for multi account assignment for non service based invoice ,service items.
error message: M8 140 Acct assgt 01 for order item 45041838 00003 does not exist
Please advice
Thanks & Regards,
Narasimha

Hi,
Please check the SAP note number : 810917.
Regards,

Profitability segment number 02209 does not exist in operating concern ESAA

Hello Experts,
Please help us on one issue which we are facing here that
"Profitability segment number 02209 does not exist in operating concern ESAA"
please could you please let us know why are facing this issue and where to check if this Profitability segment number.
Thanks and Regards,
Mangal Modi

HI,
This can occur if you have deleted data from table CE41001 and have
already assigned data to profitability segments in this operating
concern.
Check the OSS note: 93051, hope it may help you..
Thanks

Line 1 Error - Value 120 for the flexfield segment Company does not exist

{color:#0000ff}Receiving the following error message in the "Submit Expense Report - Expense Allocation" page:
"Error : Line 1 Error - Value 120 for the flexfield segment Company does not exist in the value set XX_GL_COMPANY"
This error message is shown when the user is entering the expense report in R12 Oracle Internet Expenses responsibility. After the user has finished entering the expense lines and after the user has reviewed the default expense allocation values in the expense allocation page, upon clicking on the next button , this error message is shown.
Has anybody experienced this issue?
We have opened a Service Request with Oracle but so far there is no resolution. This issue occurs intermittently. It is NOT consistent. We have advised the user base with the following workarounds to over this bug:
1. The system administrator shall clear the cache using Functional Administrator responsonsibility
OR
2. Advise the application user to sign-off from Oracle Applications and allow 5 minutes before they sign-in again.
Any help or advise in the matter is appreciated.
Thank you.
{color}

Check these things
1. you have enable PerPeriodOfService DFF to this set.
2. you are setting Context Variable like (AttributeCategory) with requried value.
Thanks

Production scheduling profile for production order type 10 does not exist – SAP Message No.10085

When i tried to make confirmation for Production Order through CO15 transaction , i receive the following error message “ Production scheduling profile for production order type 10 does not exist – SAP Message No.10085 “
In Work Scheduling view, Production Scheduling Profile is maintained as per OPKP only.
How to check whether production scheduling profile is maintained for relevant order type 10.
To do this , i went to OPKP & KOT2_OPA transactions but i don’t know how to check. I guide me through with a screen shot.
Also, pls explain about “Order Type 10” and how it is linked with material and order execution.
Looking for a detailed explanation with screen shots , since i am new to SAP.
Thanks With Regards,
Dinesh Kumar V.

Hello Dinesh,
Please check the order type dependent parameter in OPL8 here you will get the Substitute Scheduler
Then go to OPCH and check valid production scheduling profile assign here as per OPKP to your production scheduler for your plant.
Production order have Order category as 10 Process Order 40 in standard SAP you can check this in OPJH.
Best Regards,
R.Brahmankar

Status row for item '', activity ID '264766' does not exist.

I have developed a custom workflow which is AME configured. The workflow runs well in R12.1.2 instance. But when deployed to R12.1.3 it fails out.
error starting at line 20 in command:
exec XX_PACKAGE.XX_PROCEDURE(19098, 'XX_WF', '1:Yes;')
Error report:
ORA-01086: savepoint 'WF_SAVEPOINT' never established in this session or is invalid
ORA-20002: 3101: Status row for item '', activity ID '264766' does not exist.
ORA-06512: at "APPS.WF_ENGINE", line 4192
ORA-06512: at "APPS.XXIFMIS_ICX_UTILS", line 20
ORA-06512: at line 1
01086. 00000 - "savepoint '%s' never established"
*Cause: Trying to roll back to a save point that was never established.
*Action:
Could anyone suggest how I can debug this issue.

Sosa,
When i run the wfstat nothing wrong in the info. unable to find the issue.
But, i have narrow down the issue. In the function process in my workfow i am calling a custom function called update_approval_status_new.
In this the value of the respond notification to be updated to a header table of this workflow and insert into events tables.
When i comment these two dml ( update to header status & insert into events ) there is no error.
Can any one tells me can i update and insert custom tables in workflow or not. If I want to do this, what is procedure.
Regards/Prasanth

Error while loadjava xmlparserv2.jar: ORA-04043: object oracle/xml/.. does not exist

In Oracle8i.15, I tried to install xmlparserv2.jar after I downloaded xdk_plsql_9_2_0_2_0.zip and upzip to local machine.
However, when I issued the follwoing command:
loadjava -v -r -user SYSTEM/manager -force xmlparserv2.jar
For each class, it has the following error message:
resolving: oracle/xml/async/DOMBuilderErrorListener
Error while resolving class oracle/xml/async/DOMBuilderErrorListener
ORA-04043: object oracle/xml/async/DOMBuilderErrorListener does not exist
resolving: oracle/xml/comp/CXMLParser
Error while resolving class oracle/xml/comp/CXMLParser
ORA-04043: object oracle/xml/comp/CXMLParser does not exist
How can I solve this problem?
Thanks in advance.

Do you mean you use 8.1.5? You can't directly load the xmlparserv2.jar to it.

For object RF_BELEG number range does not exist

Similar Messages

Maybe you are looking for