For registration purposes, should I register in Canada or USA. I live on the border and live in both
For registration purposes, should I register in Canada or USA ? I live on the border and live in both cities Detroit & Windsor.
Hi doorjam,
Welcome to Adobe Forum,
You Adobe Customer number 0313439551is from US, so you should be registering from US.
Regards,
Rajshree
Similar Messages
-
My iPhone stolen and I download find my iPhone on it also I can sea it online but I can't locate it so please help me .. What should I do . I heard apple support can activate the GBS and send it to my e_mail . So I hope they can help me with that ...
Best wishes ..
<Email Edited by Host>These are user-to-user forums, I've asked the hosts to remove your email address from your post.
Apple and/or iTunes support can't locate it for you, only you can potentially locate it via http://icloud.com on a computer or Find My iPhone / Find My iPad on another device - but that will only work if it's connected to a network and the device hasn't already been wiped and/or Find My iPhone disabled on it.
If it was stolen then you should report it to the police. You should also change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc. -
Hey,I've got a problem on my iPad mini for a few days now?My iPad is in recovery mode at the moment and I Cannot restore my Ipad with iTunes...Can anyone help me with the solution?Each of your helps will be appreciate...Thanks for all the helps...
Follow step 1 to 6 closely to recover your iPad.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times -
I have the iPhone 5 and iPad 3. I will travel to Europe and would like to know if I need a current covertidor 220-110 for my equipments. I have an adapter, but that did not change the flow and do not want to risk it. Thank you.
All you need is a physical plug adapter, not a voltage converter. All Apple chargers work on any voltage from 110 - 240 worldwide.
-
I have purchased a new iPhone on the online store, but how come Apple can send me a repacking old device (with scar on both the border and the cable port)!!!!
And after I phone to their hotline for the issue, they asking to give me hk$400 cash coupons???? This action make me very angry. I have pay for my goods, but they are giving me some repacking rubbish, and trying to treat me as a beggar????
I have make the request to give me back a new device in good conditions, I will wait and look for what they will delivery.Do you feel better now that you have vented?
This is a user to user forum... if you want/need assistance, contact Apple directly. -
My iPhone is FULL, no memory left for photos. If I move all my photos off my iPhone, will the 'ALBUMS' and their content (pics) be blown away ? Also, what is the BEST way to clear/save photos off my iPhone ? PC, ITunes, some other app ?
I use an app called FileApp to transfer photos to my PC - I can then selectively delete photos from my iPhone and still have them on my PC - just download the app to your iPhone and follow the instructions for the accompanying program for your PC - then use your iPhone cable to connect - iTunes will also start up so just close it and you will see the iPhone storage as a drive - go the DCIM folder and open the device folder and you will see your photos.
-
I have pre-bought an album for a March 25 release. But a single has been released from the album and i cant seem to download it, its says $0.99. Do i need to buy the single aswell? Shouldnt I have access to the song becasue i already pre-bought the album?
Hello, Edgarflo.
Thank you for visiting Apple Support Communities.
Here is some helpful information regarding preorder albums in iTunes. I would recommend checking to see if you can download the single directly from the preorder album as some artists release a single that is separate from the album and will be a different purchase.
iTunes Store: About pre-orders
http://support.apple.com/kb/ht5714
Cheers,
Jason H. -
I cannot access iTunes store from my laptop. I could for years but suddenly - no.
Have removed all recently installed software. Have uninstalled and re-installed both my anti-virus software and iTunes.
Have allowed pop-ups.
Have flushed the DNS. Nothing.
Still can't access the store. Please help!Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
I bought a mic for my ipod touch 2nd gen and the mic works yet when its plugged in the speakers dont work, meaning i cant hear, so skype and other similar apps are un-useable, is there a way in which the mic and speakers will both work together?
Looking at the details for this mic, it appears that the app has to have the option to use the internal specak when a mic is plugged into the headphone jack. Specifically:
NOTE: When MityMic is plugged into your iPod/iPhone you won’t be able to use the onboard speaker for sound output. You must remove the MityMic then play back your recordings. (The Skype app has an option to enable the onboard speaker even when the mic is plugged in, so you could use MityMic for placing Skype calls. However most other apps do not have this function.)
The above is from:
http://touchmic.com/products-page/view-all-products/touchmic-mitymic---voice-rec ording-and-interview-mic/ -
How do I change or reset my password for my wifi? I have forgotten my initial password when I setup the wifi and now cant use it with my iPod but it still works with my iPad as the password option doesn't come up like the iPod.
If you are saying that the iPod asks for the password for the network and you do not know it, what may work is to turn on iCloud keychain for the iPod and iPad., Thet may sync the password from the iPad to the iPod
http://9to5mac.com/2013/10/26/how-to-setup-and-use-icloud-keychain-for-mavericks -and-ios-7/
Otherwise you will have to go into the router settings and reset the wifi password in the router -
I have a jpeg I have added for a profeesional look to my signature in my Mail acount. When I attach other files to the message and send the message to a Widows-user recipient, the signature is no no seen as a signature and simply becomes an attachment with the email.
What can I do to stop this happening. ThanksFile menu "Attach Files..." then Tick off "Windows-friendly Attachment".
-
For my purposes, should I install Boot Camp or Parallels?
I have a three year old iMac running Mavericks with 8 gigs of RAM. I want to take a class that teaches 3D design using 3ds Max. If I do I'm going to need to use a Windows platform to run the software. Never having used either one, would I be better off using Boot Camp or Parallels? Also, I haven't used Windows since I had Vista installed on a Dell laptop, which was a major proponent for my switch over to a large Mac. But I hated Vista!!! Now I believe they're up to Windows 8. Is Windows 8 better than 7?
Windows 7 is better than windows 8 for many reasons but either are workable. I prefer parallels when I need windows (in fact I don't have a bootcamp partition) because I like to have access to my mail, calendar, iTunes, ... If your application will work with parallels then I would go parallels+win7. It won't be as fast as bootcamp but since it is a class, maybe speed isn't your top concern.
win7 cost money
parallels cost money
bootcamp is free
good luck. -
I am somewhat computer illiterate but I have a question. I have had iTunes for several years and never had a problem. I occassionally get prompts to update and those only take about a minute and they're done. Last week, the download could not complete even after I had tried 2 or 3 times. I just let it go thinking I would try again when I had more time. Yesterday I tried to access iTunes on my Windows 7 and got a message, " could not start iTunes, MSVCR80 dill is missing. Please reload iTunes to fix the problem. I tried several times but I continue to get the same message without iTunes coming up. I talked to a computer geek today who told me I should go to my control panel and uninstall iTunes and reinstall it. My question. I have placed many albums of music and purchased many songs from the iTunes shop which I am concerned will go missing or deleted if I uninstall and reinstall. Will I lose my library if I do this? What precautions can I take to make sure everything comes back as it was?
In a message dated 6/1/2011 9:56:56 P.M. Eastern Daylight Time,
[email protected] writes:
http://forums.adobe.com/message/3714327#3714327
I removed the whole suite. I tried last night to download the free trial
CS5, it took seven hour's and when the "do you accept the term's" popped up,
I clicked it and another page came up saying to close explorer and it was
not open (I kept clicking and it kept popping up I couldn't make it leave
that page so I canceled the whole thing) I will give the link that you sent
a try tomorrow and will let you know one way or the other. Thanks, it is
driving me insane ....M -
I need the simplest method of using two 6534 cards for a memory (UUT) test. I want to write (byte-wide) a pattern (A5,5A) into the UUT, then read it back and verify it matches the value written. Things that change are: Address inputs (increment by 1 for each read/write) with the control signals (card 1) and data values written/read (card 2). If I detect a mis-match, the test stops, I read the location one more time and verify it's really incorrect, the correct value is written back into the same location just read, a counter is incremented to keep track of the tota
l errors detected and the test (memory read/verify) is resumed. Each time through the memory another counter is incremented to track the number of passes through the memory read test. The test should terminate when the operator hits the VI panel STOP TEST button.Dave
Check out chapter two of the 653x User Manual for information on the different modes of operation. There it explains the difference between strobed and unstrobed I/O as well as Pattern I/O and Handshaking. It sounds as though unstrobed should work unless your UUT requires hardware timing or handshaking. You will have to keep track of errors in software however since the 6534 does not have any counters on it.
Brian -
Mac Desktop.processor 2.7 , intel core 17 . 16gh . Created apple album .Tried to purchase but will not me complete as do not have a zip code as my country is Canada.Tried to change country but unable to do .Everthing else seems to have correct Country (itunes/photos/apple store ) .What is the correct pathway to change Country for the Apple Album ?
Thank you .Now I have created album , Changed to correct Country mode , through checkout and started upload to apple store ! Will NOT complete this very last task .Called service provider for wireless internet (only service available in rural NS . Eastlink .ca ) . Service teck says they cannot make it faster .Tried twice again . Is their some way I could load the Apple Album on a transport/ USB stick to take to town where a friend has "real " high speed .? Thank u in advance .
Maybe you are looking for
-
What are the things we need to install on client desktop?
Hi all I will need to install Peoplesoft Enterprise. However, for my part I will need to try to install it into serveral clients but connect it to a database. Which means that the main database is not in my com but in another com, is it possible that
-
Unable to open the BI Query after change in ODS structure
Dear All, I have a query which is based on some ODS. I have added one more InfoObject to the data part of this ODS and deleted one of the existing one. Now when I try to open the existing query (so that I can include this new field) based on this ODS
-
I cannot find my Lumetri libraries for Premiere CC - how can I get them?
I cannot find my Lumetri libraries for Premiere CC - how can I get them?
-
Sub panel vi cannot be loaded properly when main vi is converted to exe
Hi All, I have a main vi that uses sub panel to call another single vi during the operation. The code is working well in vi level. However, When I converted the main vi to exe file, this sub panel cannot load that single vi properly. The error shows"
-
Where is the link to upgrade from 7.0 to 7.0.1?
Where is the link to upgrade from 7.0 to 7/0/1?