For the attention of "tpodell140"

Hello there,
Just saw your advice given for post titled "nano frozen". I followed out your advice holding down middle and menu key and my nano screen works now! Thanks.
PS any idea why the screen freezes like it does and they we have to go through process of holding down keys to get it working again?? The reason I ask is that I have only had my Ipod Nano for just under 5 months and if a major problem I might ask for new replacement.
Many thanks again for the advice!!!

"PS any idea why the screen freezes like it does and they we have to go through process of holding down keys to get it working again?? The reason I ask is that I have only had my Ipod Nano for just under 5 months and if a major problem I might ask for new replacement."
Can I answer instead?
Doing what you did is called a "reset" and is a very common fix for iPod ills. It's posted all over these forums just about every other post (mainly because folks don't read the manual or the getting started guide before coming here!).
It's just like restarting your computer when it freezes or won't respond and it's not a major problem unless you frequently have to do this.
Nothing to worry about.

Similar Messages

For the attention of DavidM - moderator - rebootin...

David,
I am one of the many who has experienced the random rebooting, many times over the last 18 months or so since the upgrade to the new look software. This issue has been highlighted by various people over the period, and your stock reply is for everyone to send you a private message and you will help.
The only help we want is a guaranteed supply of service, free from rebooting, provided by a combination of a stable BT Vision box and properly programmed software. Can you help with this...? If so, please explain what your plan is...?
When this problem first arose I was in regular contact with a Senior Manager for BT Vision Products, and she couldn't help me. When my questions got hard last November, she chose to just ignore me.
Last week I received an email from another BT employee from the Resolutions Dept stating that "This issue will not be fixed". Again, I went back to him with a hard question, and again, he has chosen to ignore me.
On one of my previous forum posts last week your BT TV expert SteveM questioned his colleagues comment above. Again, I went back to Steve with a hard question, and again, he has chosen not to reply as yet.
My friend's Sky box has never rebooted randomly. You would think that if BT can afford to pay £900m for the rights to broadcast Champions League football, then they can afford to fix this problem. You would also think that a company the size of BT would have the clout to employee whomever they need to make this work. If your box supplier can't provide working boxes, go to another supplier. If your software programmers can't write a working programme...well you know the answer.
Sorry to ramble on, but BT have rambled on even longer in their efforts to find a resolution to this major problem.
I do hope that you will show everyone on this forum the professional coutesy of a positive response and action plan, and I for one look forward to your comments in due course.
Thank you,
Douglas

Yep, mine reboots all the time as well and has lately also started showing a white screen and refusing to budge from it whenever we watch BBC iPlayer and the programme finishes.
Since the OP mentions BT Sport I'll also say that imo BT Vision has gone from fairly appalling but cheap. to nearly unwatchable it has so much dross on it. This is because no doubt ALL the money has gone into BT Sport which according to myself and a great many others, is also complete dross.
BT's complaints have gone through the roof since BT Sport arrived and little wonder - I get it for free and can't be bothered with it.
The only positive thing I can say regarding BT is; thank goodness my contract is up this month...

For the Attention of BTCare Staff. Assistance requ...

Hi there help is required immediately.
Where do i start.
Basically we have had problems with our broadband since we got it in a bit back and recently it got even worse. We reported this all to BT the same engineer has had too visit twice even though he clearly said there is not a problem with our line and that it is a fault at the exchange because of the section our house is hooked up too.
His last visit was about 3 weeks ago , he said everything fine but obviously speeds gross as he agreed, we are literally living with between 0.3 0.7 speeds now constantly and 1mb if we lucky and this is all the time. He forwarded all this too some specialist team that deal with the exchange faults etc and said they woudl ring us within 2 days! this was over 3 weks ago it must be now and nothing still!! internet si actually worse and i log in to my bt account tonight and amazingly the fault has been taken ooff ~! I have emaield bt numerous times over past week with no response and this is how they treat me. I would appreciate help with this matter asap or i really have no option but to take it to court because this is just shambolic. thanks

No my question is not with bt open reach they done there job ! The note's he put's frward go on my bt account for future reference if bt need too look at history of problems. BT retail Provide my broadband so they sort it ! end of story ! OFCOM always states that when i pay a product i get what im paying for. we can chat lega if u wan too ?
Finally the terrible speed test worked. ps: to the person who said this speed test provides things that are required, wrong , it provides nothing different to speed test.com which actually provided more info.
but here it is anyways
Download speedachieved during the test was - 2842 Kbps
For your connection, the acceptable range of speeds is 600-7150 Kbps.
Additional Information:
Your DSL Connection Rate :8128 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 7150 Kbps
This speed is actually miracle shame it's a one off im guessing every other bt customer here has went to bed.
anyways i'll see if any bt representative here want to fix the FAULT that has been deleted off my account which i have all the info for still i save everything so if it is not sorted asap, bills will be stopped and trading standards will be contacted as well as my dad's solicitor. Because enough is enough.

For the attention of Mod DavidM - Slow broadband s...

Hello. My broadband speed is at 576kbs down and 288kbs up. According to kitz, I'm 2.28km direct from the exchange and my estimated line speeds are 2048kbps on Fixed ASDL and 4500kbps on DSL Max. Those are currently the only 2 options available in my area until FTTC is rolled out next year. In terms of noise attenuation heres the following...
23:00:12, 13 Aug.
( 64.430000) ETHoA is up - VPI: 0, VCI:35
23:00:12, 13 Aug.
( 64.430000) DSL is up
23:00:11, 13 Aug.
( 62.980000) DSL noise margin: 25.00 dB upstream, 28.90 dB downstream
23:00:10, 13 Aug.
( 62.890000) DSL line rate: 288 Kbps upstream, 576 Kbps downstream
22:59:46, 13 Aug.
( 38.130000) WAN Auto-sensing running.
Running on a BT Home Hub 4. It's been a lot slower running speeds as of recently though it may of been a while though I've been out of the country so unsure. If there's my PC connected and any other device, it pretty much slows to a near stop. Any help that you can give would be massively appreciated. I've contacted BT customer service before to just have line tests run etc... which has been absolutely no help. Hub is connected to the master socket aswell.

Hi Welcome to the community forums
Here is a basic guide to getting help from the community members done by CL Keith Please read through the link posted http://forumhelp.dyndns.info/speed/first_steps.html
once you have posted the information asked for then the community members can help you more
if using a hub 4 locate these lines located in the hub logs
Lines should look like this
19:11:29, 07 Nov. (2290101.460000) DSL noise margin: 7.00 dB upstream, 6.10 dB downstream
19:11:29, 07 Nov. (2290101.390000) DSL line rate: 448 Kbps upstream, 288 Kbps downstream
Thank You
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

For the attention of Pat Willener.

further to my screen shot on previous message.
the option "unclick grayscale" is not highlighted, this is defalt.
I cannot "unclick grayscale" for recent pdf files.

Some tips to get what you need from forums, which can be confusing places at first. And if you don't follow the usual way of doing things, it can actually cause annoyance and work against you.
If you have more to add it is very important to return to the original message and hit Reply. Posting a new message is very confusing, and is likely to lead to your message being ignored (or worse).
Also, it's helpful to realise that the people here aren't staff and anyone could pick up your message and help. If you address things to particular people it reduces the chances of getting help.

Two Loop for the position

Hi people i explain my situation.
I have a table with some component.
Every component have a type. For example:
Pos Name Netprice Type Uepos
10    xxxx    xxxx      TAP
20    yyyy    yyyy      TAN     10
30    zzzz    zzzz      TAN     10
Now i must do it.
Loop at this table, if TYPE = TAN i read the UEPOS value and get it into a Zvariable.
Now i must reloop in the table because i must SUM the Netprice of every element Type TAN that have the same UEPOS, and this UEPOS must be the same of the POSNR of the element that have the Type TAP.
Understand? I Know it's difficolt to explain. I try more in another type.
I have this situation:
POS NAME NETPR
10     A        0
20     A.1     xx
30     A.2     yy
40     B        0
50     B.1     xx
In this actual situation the A.1 are dependento of A and i wanto to sum in the NETPR of A the netpr xx , yy of the A.1 and A.2. then the same for B position.
Thanks for the attention.

hey i think you can do like this.
SORT ITAB by TYPE UEPOS.
clear: w_type, w_uepos, w_netpr.
loop at itab.
if w_type ne itab-type
or w_uepos ne itab-uepos.
here you can capture previous type and uepos.. so write logic to use netprice before clearing that.
clear w_netpr.
w_type = itab-type.
w_uepos = itab-uepos.
endif.
w_netpr = w_netpr + itab-netprice.
endloop.
Pos Name Netprice Type Uepos
10 xxxx xxxx TAP
20 yyyy yyyy TAN 10
30 zzzz zzzz TAN 10

Attention! For the visually impaired users of OS X!!!

Just wanted to bring this to the attention of all users of Universal Access Zoom feature in OS X.
There is a bug in OS 10.4.8 that basically defaults amount of magnification to "0" each time Zoom is switched On and Off. It can be quite a time waster to have to re-adjust amount of magnification each time you enable and disable the Zoom feature.
This isn't at all a problem for people that use "rapid zoom' option of course. But since all of us have different needs and abilities using this option may not be a solution for everyone.
I have already notified Apple Support.
Hopefully things will return to the way they were in OS 10.4 - 10.4.7. However, I strongly encourage everyone who finds this bug a problem to also do the same and notify Apple Support either directly or by using the feedback form.
regards,
Susan.

The general icon sizes are kind of matched to the rest of the user interface. You can set the zoom preferences to follow the mouse around; you can also lower the screen resolution to get an overall increase in the size of screen objects.

Attention N200 Owners, I found a fix for the fan

In an attempt to improve battery life, I made an important discovery. Apparently lenovo is using the desktop CPU P States instead of the mobile ones. With my T7200 running at 2GHz, this means it's using 1.35V instead of the 1.225V it's supposed to be. This mistake on lenovo's part means increased heat output and a fan that has no idea how fast to run. Here's how to fix it:
1. Download and Install RightMark CPU Clock Utility. http://cpu.rightmark.org/download.shtml
2. Open the utility and select "Advanced CPU Settings" in the pane on the left side.
3. Towards the bottom under "Intel Core 2 Family Advanced Features", change the "CPU type selection" setting from desktop to mobile.
In order to make this change stick, you have to make the RightMark CPU Clock Utility run at startup.
1. Click on settings in the pane on the left side.
2. Check the box next to "Run at Startup"
3. Select "via Startup Folder" in the pull down box.
4. You may also want to check the "Start Minimized to Tray" box above, or the main window will open every time you start the computer.
Untill lenovo does something about this problem, this is all you can do. However, you will see an improvement in battery life and a reduction in noise, along with a fan that does not have ADD.
Moderator Note; converted to clickable link
Message Edited by andyP on 04-15-2008 09:23 AM

@iamdh
He doesn´t change the voltage of the CPU fan which could indeed be a little risky. He changes the voltage of the CPU which is according to CPU-Z by default (http://www.cpuid.com/cpuz.php) a little higher than the default voltage of the CPU.
I also noticed this before and did exactly the same with my 3000 N200. The difference is just that my N200 has a T5250 CPU but as it seems the same overvoltage problem. With his workaround the heat and powerconsumption is especially under high load reduced, resulting in a higher runtime.
On the other hand this has hardly any effect on the fan spining up an down when the CPU is idle.
Sorry, small addition:
I used another way to get the "right" voltages for my CPU. When I open RMClock my CPU already is marked as an mobile CPU, so this is not the problem in my case. But you can also change voltages for the different Pstates in RMClock manually. And this is what I did to get the default voltages for my CPU. Interested ones can find the necessary information here http://forum.notebookreview.com/showthread.php?p=2637648 (They describe how to undervolt a CPU but as a start it is just enough to supply the CPU with the default voltage instead of the "higher than above" voltage supplied by for example my 3000 N200)
Just for information: The default Voltage of my T5250 CPU is 0.95 Volt at idle and 1.25 at load. According to CPU-Z my CPU gets 1.063 Volt at idle and 1.363 Volt at load.
Message Edited by oNeill on 04-15-2008 05:35 PM

How-to use Excel for the XML file input?

Hello all,
Following our discussion with Gerhard Steinhuber on the very nice tutorial from Horst Schaude , "How to upload mass data via XML File Input" , I am starting this new discussion.
In the comments section of this previous cited tutorial, Rufat Gadirov explains how to use a generated XML from Eclipse instead of your XSD file as your source in Excel.
However, in spite of all the instructions, I am still facing the same issue in Excel when I try to save my file as XML : "The XML maps in this workbook are not exportable".
What I try to do is to create one or more Sales Orders with multiple Items in it from a XML File Input, using excel to enter data.
The part with the File input is working (if I directly upload my file to the webDAV, it creates a sales order instance with multiple items).
The only missing part is the Excel data input that I cannot make work. Any help on this matter would be greatly appreciated.
Here is my XML file that I try to use as a source in Excel before inputing data from Excel:
<?xml version="1.0" encoding="UTF-8"?>
<p:MySalesOrderUploadedIntegrationInputRequest xmlns:p="http://001365xxx-one-off.sap.com/YUUD0G3OY_" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<MessageHeader>
    <CreationDateTime>2015-03-02T12:00:00.000Z</CreationDateTime>
</MessageHeader>
    <List actionCode="01" listCompleteTransmissionIndicator="true" reconciliationPeriodCounterValue="0">
        <MySalesOrderUploaded>
          <MySalesOrderUploadedID>idvalue0</MySalesOrderUploadedID>
          <MyBuyerID schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeID="token">token</MyBuyerID>
          <MyDateTime>2015-03-02T12:00:00.000Z</MyDateTime>
          <MyName languageCode="EN">MyName</MyName>
          <MyBillToParty schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeAgencySchemeID="token" schemeID="token">token</MyBillToParty>
          <MyDateToBeDelivered>2001-01-01</MyDateToBeDelivered>
          <MyEmployeeResponsible schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeAgencySchemeID="token" schemeID="token">token</MyEmployeeResponsible>
          <MySalesUnit schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeAgencySchemeID="token" schemeID="token">token</MySalesUnit>
            <MyItem>
                <MyItemID>token</MyItemID>
                <MyItemProductID schemeAgencyID="token" schemeID="token">token</MyItemProductID>
                <MyItemDescription languageCode="EN">MyItemDescription</MyItemDescription>
                <MyProductTypeCode>token</MyProductTypeCode>
                <MyRequestedQuantity unitCode="token">0.0</MyRequestedQuantity>
                <MyConfirmedQuantity unitCode="token">0.0</MyConfirmedQuantity>
                <MyNetAmount currencyCode="token">0.0</MyNetAmount>
            </MyItem>
        </MySalesOrderUploaded>
        <MySalesOrderUploaded>
          <MySalesOrderUploadedID>idvalue0</MySalesOrderUploadedID>
          <MyBuyerID schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeID="token">token</MyBuyerID>
          <MyDateTime>2015-03-02T12:00:00.000Z</MyDateTime>
          <MyName languageCode="EN">MyName</MyName>
          <MyBillToParty schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeAgencySchemeID="token" schemeID="token">token</MyBillToParty>
          <MyDateToBeDelivered>2001-01-01</MyDateToBeDelivered>
          <MyEmployeeResponsible schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeAgencySchemeID="token" schemeID="token">token</MyEmployeeResponsible>
          <MySalesUnit schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeAgencySchemeID="token" schemeID="token">token</MySalesUnit>
            <MyItem>
                <MyItemID>token</MyItemID>
                <MyItemProductID schemeAgencyID="token" schemeID="token">token</MyItemProductID>
                <MyItemDescription languageCode="EN">MyItemDescription</MyItemDescription>
                <MyProductTypeCode>token</MyProductTypeCode>
                <MyRequestedQuantity unitCode="token">0.0</MyRequestedQuantity>
                <MyConfirmedQuantity unitCode="token">0.0</MyConfirmedQuantity>
                <MyNetAmount currencyCode="token">0.0</MyNetAmount>
            </MyItem>
        </MySalesOrderUploaded>
    </List>
</p:MySalesOrderUploadedIntegrationInputRequest>
Thank you all for your attention.
Best regards.
Jacques-Antoine Ollier

Hello Jacques-Antoine,
I suppose that as you have tried to construct a map from the schema, you have taken the elements from the List level down. In this case I also can't export the map.
But if you take the elements from the level MySalesOrderUploaded down, you'll get the exportable map (screenshots)
Best regards,
Leonid Granatstein

I repeatedly get "error during rendering/encoding of menus/slideshow" message. This process is the same on my iMac, MacBook and another iMac. I have been burning dvd's int he same way for the past 12 months using the exact same steps successfully.

I keep getting "error during rendering/encoding of menus/slideshows" message. I have been burning DVD's in exactly the same way for the past 12 months and mostly on my MacBook which is 3 years old. Obviously I'm using iDVD. I purchased an iMac about a year ago and moved to use this for dvd burning without problem. A few months ago (approximately) I started to experience problems with burning with the error message above. I tried everything including starting the whole process from scratch right down to capturing the movie clips from my video recorder into iMovie, then using them in iDVD. Still the same message came up. I lost count of how many times I repeated the process with different clips and variations and the same thing happened. This was also the case with my MacBook and my husband's iMac.
After taking both of mymac's tothe service centre, having new optical thingys put it and even a new hard drive on my iMac along with a new DVD burner the same thing happened. They told me it must be the process that I am using that is incorrect!
I took my 27" iMac to an apple shop and asked them to assist me while I use the same technique as I always had. The same message came up so they tried using my clips in one of their mac's. The same message. They tried it with different clips and the same message. The only way we could get theirs to work was with a magic DVD which did not produce what I needed and was limited with only one page.
I now cannot use any of my Mac's for the intended purpose that I bought them for - to produce good media for my work! It was suggested that I purchase some non Mac software to burn DVDs which defeats the object of having a mac with iDVD in my opinion. I have a book on iDVD which is very informative and have followed the process to the letter and checked all the trouble shooting and still no remedy. It was mentioned that an up-date may have caused the problem on all my macs.
I feel that this issue should be addressed by Apple as a matter of correctness.
I now find that on the net there are many posts in forums and such like with exactly the same (almost word for word) problems. Please Apple, keep/regain your good name and sort this out.
Jayne Connelly

Thanks Bengt W for your attention to this matter. So much appreciated. And thanks for putting me right on the aim of forums (new to this). Although, you may regret asking for more information. I've added everything I can below.
The process I used is as follows:
Import recorded clips of between 5 and 15minutes each from my video recorder into i
Edit the clips (remove unwanted start and endng)
Add title to front of clips
‘Share’ them to ‘movie’ (export using QuickTime)folder in .mov format individually
Open iDVD and ‘create new project’
Select ‘favourite’ theme that I have set up forall my work dvd’s (this has been used successfully many times and I’ve triedwithout using the favourite them).
Add 2 submenus for each group of clips
Select submenu - drag and drop between 3 – 6 clips in each of the twosubmenus
Change title colours on clips
Dragand drop image into drop zones where required
In‘map’ view I check for any yellow warnings before burning to disc
In an attempt to remedy the problems I’ve tried the following:
Try new DVD discs
Try different themes (favourites and standardones)
Change images in drop zones
Start whole process again even from importingfrom camera again
Two other completely different computers (iMacand MacBook) with iDVD
Go to apple shop and use their computers to doin iDVD
Try with one clip and no menu pages added
Use a clip that I already have that did notoriginate from my camera
Turn computer off and restart
New hard drive
New optical lense (thing)
New DVD burner
Saving to disc image rather than dvd disc
Other points:
I also have a ‘flip’ and ‘iPhone’ whereI’ve imported footage camera which, although limited, records and makes videoclips and burns them to DVD through iDVD without problem.
For example, I have just gone through steps 5 - 11 using some clips that were already imported from my iphone to iPhoto and dragged across. I used a theme that I've used before which has failed and added one sub menu page where the clip went. It burned to disc image successfully.
The startup disc, I believe will have no space issues asit’s a new hard drive with no use apart from this. That could have been an issue before (I didn’t check it) butnot now.
Other technical stuff that I don't understand but you may:
I have…… Mac OS X Version 10.6.7 with all updates onit. Processor 2.8 GHz Intel Corei7. Memory 4GB 1067 MHz DDR3.
iDVD version 7.1.1
HardwareOverview:
Model Name: iMac
Model Identifier: iMac11,1
Processor Name: Intel Core i7
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 4
L2 Cache (per core): 256 KB
L3 Cache: 8 MB
Memory: 4GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: IM111.0034.B02
SMC Version (system):            1.54f36
OPTIARCDVD RW AD-5680H:
Firmware Revision:     3AHB
Interconnect:    ATAPI
Burn Support:   Yes (AppleShipping Drive)
Cache:    2048KB
Reads DVD:    Yes
CD-Write: -R, -RW
DVD-Write:   -R, -R DL,-RW, +R, +R DL, +RW
Write Strategies: CD-TAO,CD-SAO, CD-Raw, DVD-DAO
Media: Toshow the available burn speeds, insert a disc and choose View > Refresh
If you can solve this you are better than the 'apple geeks' in the shop and the service technicians in the service centre (and of course me but that's no achievement).
Eagerly awaiting your reply.
Jayne

My personal laundry list for the N8.

Notably, the bugs I have experienced thus far are:
1. Inability for Wi-Fi to connect in Offline mode if you have previously gone to Offline mode and said No when activating an app that requires data connection.
2. When you turn on the phone without a SIM card, then hit the Call button, it will stay in an infinite loop in the Dialer screen. It'll ask you to please insert a sim card, followed by either OK or Cancel. So after you insert the SIM card, you hit OK, then it repeats the question. If you hit Cancel, it repeats the question. You can't get out of this infinite cycle other than turning the N8 off.
3. After a hard reset of your phone, the Ovi Social app is missing the widget for the home screen. Yes, you can go to the Nokia Messaging OTA site to get the update, but after 2 hard resets, the installation of the update gives me a "Unable to install" error. Which is a joke, because after the first hard reset it worked wonderfully. And it never worked for me subsequently.
4. Even after defining a WLAN destination, if you don't have a SIM card, you can't configure any mail other Mail for Exchange. Yes, the new Mail app tries to use mail routed through Nokia, but at least give me the option to create mailboxes using old traditional direct IMAP or POP3.
5. With my N95 and N97, as soon as I turn on my car (equipped with Nokia CK-100), I automatically get connected to BT HFP and A2DP profiles. The car kit will tell me, "Phone connected." A second later, "Player connected." With the N8, the car kit will only connect to just the phone automatically. For the player to connect while the car is on, I have to open up the music player and play a music, which will force N8 to make the A2DP connection. So when that happens, you hear a 1.5 second message saying, "Player connected" followed by music that is already 2 to 3 seconds into the song. I thought it was perhaps the Car Kit getting full with the list of paired devices (memory is for 8 pairings), but clearing the list doesn't help. I thought it was the Car Kit firmware, so I upgraded it to 4.401, no luck. Then when I tried my old N97 and N95, it worked as expected! But not the N8.
6. Sometimes after a hard reset, even when I respond with selecting my country/city and entering my time, the phone will start with the UK time zone instead. The UTC time is correct, but for the wrong time zone. Why does it do that?!?
7. 60% of the time when I turn on the phone (even when it was Normal mode during the previous shut down), I do not get the classic Nokia tone when the iconic handshake video plays. This is your brand recognition! Something so valuable that it's impossible to put a dollar value on it. And you botch that up?!?
List of the reduced functionalities:
1. In previous generations of Mail app, if an email contains what appears to be a phone number, Symbian will make it clickable so that you can call the number. Not so with Mail app in S^3.
2. In previous versions of Messaging app, if I receive a SMS, I can either click on the call button (no longer exists in the N8) or Options > Call to call the sender of the SMS automatically. Now, with S^3, the Call option is no longer in Options. Makes it really hard to call the SMS sender back while you're driving.
3. In the previous generations of Mail app, I can call up the Listen option when I'm either in a Mailbox or have the email open, and it will read the email. Now, this functionality only exists on the Messaging app, not Mail app.
4. If you open up the Message Reader app, it will be able to playback all your SMS, MMS, Mail mailbox's messages. Great, right? But in order to listen to an email, you must first go through all the SMS messages first before it will play back any emails. So if you have 20 SMSs, you have to click on the FFw button 20 times before you get to listen to your email. Truly a brilliant design, whoever came up with that.
5. In the previous Symbian web browsers, when I hit the Back button, I can either go back/forward using the left/right gestures, and selecting a page by tapping the page. I also have the option of hitting the left or right arrows right above the soft keys and hitting Select (left soft key) or Cancel/Stop (right soft key). In the N8, everything but the Select key is there. Now it's replaced by a blank?!? If you want to force me to use gestures and taps, then at least do me a favor and remove the left/right arrows on the screen. (Surprisingly, if I invoke the web browser using the YouTube "app", the Select soft key appears during back/forward navigation. Hmmm...)
List of improvement suggestions:
1. Whenever you're in a screen that has a tiny left/right arrow (such as reading an SMS message, or looking at your Messaging Inbox, allow me to swipe left or right to go to the previous/next message or folder. This functionality already exists in the Calendar app. So why stop there? Not only that, but extend it to Settings menu! Why should gestures be limited to up and down, except for the Calendar application that allows left/right?
2. Allow landscape dialer, like the N97.
3. Uhm, what happened to the Converter application? It has been a staple of all Nokia phones, and suddenly it's missing from the flagship phone? Nokia's comeback phone?!?
4. A much simpler VPN application? Look at what Apple did in just a little over a year. A simple process of logging into Cisco VPN. What's Nokia's way, after having VPN solution for years and years? Still a mess.
5. Previously, connectivity settings were easier to get to with the N91, N95 and N97. Now, I have A) Menu > Options > Settings > Connectivity > Wi-Fi, and B) Menu > Options > Settings > Connectivity > Settings > Switch to Wi-Fi? I can work around it as a power user. What about those people who make up the biggest market share of iPhone users who are not technologically savvy? And do you see the irony with Settings buried within Settings menu?
6. Port all functionalities of PC Suite to Ovi Suite, and fix all the bugs in Ovi Suite. The latest 3.0.0.271 still has bugs and missing functionalities. Open back up the dual code development pipelines (PC Suite and Ovi Suite) to the N8 until all core functionalites are successfully brought over to Ovi Suite.
Nokia, I hope this thread captures your attention within the developers and management. Thank you.
John @ Chicago // 5160 (1999.07.20) > 7160 (2001.06.09) > 6340i (2003.04.26) > 6620 (2004.08.24) > 7610b (2005.05.08) > N91 (2006.06.07) > N95-3 (2007.09.28) > N95-3 #2 (2007.12.05) > E51 (2008.03.10) > N97 (2009.06.11) > N97 #2 (2009.09.11-warranty replacement) > N97 #3 (2009.12.10-warranty replacement) > N8 (2010.12.02) > N8 #2 (2010.12.11-retailer replacement) > 808 (2012.12.10) > X2 Dual Sim (2015.01.19-for motorcycle offline maps use only) %gt; 808 #2 (2015.01.26-manufacturer replacement)

Status update after installing PR 1.1 version 013.016 for product code 059DV2 on 2011.02.20, plus new bug reports after testing and using PR 1.1 extensively for 44 days. I thought I needed to put in this status update before installing PR 1.2, which became available on 2011.04.03 for my market.
1. Inability for Wi-Fi to connect in Offline mode if you have previously gone to Offline mode and said No when activating an app that requires data connection. Status as of PR 1.1: Semi-fixed. After installing PR 1.1, when you're in Offline mode and you use an App that required Internet connection and subsequently say No when asked if you want to allow WiFi in Offline mode, it will still prompt you later on. But this is semi-fixed because sometimes, when the N8 is in Offline mode and you try to access an app that needs Internet connection, the question "Allow Wi-Fi connections during this offline period?" doesn't even bother to prompt you, other than "Conn. Unavailable" in the upper left corner of the screen. What da?!?
2. When you turn on the phone without a SIM card, then hit the Call button, it will stay in an infinite loop in the Dialer screen. It'll ask you to please insert a sim card, followed by either OK or Cancel. So after you insert the SIM card, you hit OK, then it repeats the question. If you hit Cancel, it repeats the question. You can't get out of this infinite cycle other than turning the N8 off. Status as of PR 1.1: Fixed.
3. After a hard reset of your phone, the Ovi Social app is missing the widget for the home screen. Yes, you can go to the Nokia Messaging OTA site to get the update, but after 2 hard resets, the installation of the update gives me a "Unable to install" error. Which is a joke, because after the first hard reset it worked wonderfully. And it never worked for me subsequently. Status as of PR 1.1: Unknown. Have not tried to do a hard reset, but now that Social is on 1.3, I'm sure the installer file now includes the widget. But I also heard that the latest beta version of 1.3 (as of this writing) may require an uninstallation of older versions of Social first, otherwise it may fail. Other reports indicate Social no longer works after the update. Follow the discussion in betalabs.nokia.com for the Social 1.3 app.
4. Even after defining a WLAN destination, if you don't have a SIM card, you can't configure any mail other Mail for Exchange. Yes, the new Mail app tries to use mail routed through Nokia, but at least give me the option to create mailboxes using old traditional direct IMAP or POP3. Status as of PR 1.1: Still unfixed. No SIM card, no ability to define a new mailbox other than Mail for Exchange. You absolutely must have SIM card. Why?!?
5. With my N95 and N97, as soon as I turn on my car (equipped with Nokia CK-100), I automatically get connected to BT HFP and A2DP profiles. The car kit will tell me, "Phone connected." A second later, "Player connected." With the N8, the car kit will only connect to just the phone automatically. For the player to connect while the car is on, I have to open up the music player and play a music, which will force N8 to make the A2DP connection. So when that happens, you hear a 1.5 second message saying, "Player connected" followed by music that is already 2 to 3 seconds into the song. I thought it was perhaps the Car Kit getting full with the list of paired devices (memory is for 8 pairings), but clearing the list doesn't help. I thought it was the Car Kit firmware, so I upgraded it to 4.401, no luck. Then when I tried my old N97 and N95, it worked as expected! But not the N8. Status as of PR 1.1: Still broken. I won't be able to test this out with PR 1.2, since I ripped out Nokia CK-100 and installed CK-600. I've never used the N97 with CK-600, so I don't know if the A2DP connection is automatic or not, but with N8 PR 1.1 and either CK-100 or CK-600, the A2DP connection is still NOT automatic.
6. Sometimes after a hard reset, even when I respond with selecting my country/city and entering my time, the phone will start with the UK time zone instead. The UTC time is correct, but for the wrong time zone. Why does it do that?!? Status as of PR 1.1: Unknown. I've only done 1 hard reset since upgrading to PR 1.1, and it didn't misbehave. But during PR 1.0, the behavior wasn't constant, but half the time.
7. 60% of the time when I turn on the phone (even when it was Normal mode during the previous shut down), I do not get the classic Nokia tone when the iconic handshake video plays. This is your brand recognition! Something so valuable that it's impossible to put a dollar value on it. And you botch that up?!? Status as of PR 1.1: Still a problem. Now, it seems like 90% of the time when I turn on the N8, the Nokia tone doesn't play during the hand shake.
8. [New bug in PR 1.1] Light time-out: I never had a problem with this in N8 PR 1.0, but only started noticing this in PR 1.1. When you have a browser up and running, and you leave the N8 alone, like no movement or screen activity such as leaving it on a table, the screen doesn't black out after the allotted time setting in Settings > Phone > Display > Light time-out. It will go dim, but the screensaver never kicks in. This happens 75% of the time, and is quite annoying. This behavior seems to manifest itself when you're in an app that requires Internet connection, such as the browser or email application.
9. [New bug in PR 1.1 or possibly in PR 1.0 as well] Apps dependent on operator even on unlocked and unsubsidized Nokia phones: I am not sure if this is a new problem with PR 1.1 or existed in PR 1.0, but it appears that some apps like Social, Email and Ovi Maps are dependent on operator permissions, even if the device is unsubsidized and purchased unlocked. I don't know if this is a problem with PR 1.0 because when I traveled from 2011.02.25 to 2011.03.10, I already upgraded my N8 to PR 1.1. But basically, after I popped in a pre-paid SIM card at another country, starting Social and trying to log in will tell me something along the lines of checking with the operator and then telling me I cannot use Social. (I traveled to China.) But I could kind of work around it by exiting, then tapping the Social widget. Sometimes hitting refresh will somehow allow me to get Facebook updates in China, and sometimes it will tell me Service Unavailable. Likewise with Ovi Maps. When I was back home in the USA, I had many other online services, like Time Out, Lonely Planet, Trip Advisor, etc. But once I popped in a Chinese SIM card and go online with the operator (3G or Edge), all my online services disappeared, and replaced with Chinese services which was totally useless as my USA N8 cannot render Chinese characters. Mind you, I did not connect to 3G or Edge for a few days, so during those few days when I was just using WiFi, I was still able to look up things in English in Trip Advisor, such as nearby restaurants or hotels. But as soon as I connected online via SIM operator network, features started disappearing. Same with email behavior. No SIM inserted, can't configure new email mailboxes. No SIM card, Social displays "Service is not available" even if I have WiFi AP connected. The important question here is, why are unlocked and unsubsidized S^3 phones even checking with the operator if I can run whatever services?
List of the reduced functionalities:
1. In previous generations of Mail app, if an email contains what appears to be a phone number, Symbian will make it clickable so that you can call the number. Not so with Mail app in S^3. Status as of PR 1.1: Still a problem.
2. In previous versions of Messaging app, if I receive a SMS, I can either click on the call button (no longer exists in the N8) or Options > Call to call the sender of the SMS automatically. Now, with S^3, the Call option is no longer in Options. Makes it really hard to call the SMS sender back while you're driving. Status as of PR 1.1: Still a problem.
3. In the previous generations of Mail app, I can call up the Listen option when I'm either in a Mailbox or have the email open, and it will read the email. Now, this functionality only exists on the Messaging app, not Mail app. Status as of PR 1.1: Still a problem.
4. If you open up the Message Reader app, it will be able to playback all your SMS, MMS, Mail mailbox's messages. Great, right? But in order to listen to an email, you must first go through all the SMS messages first before it will play back any emails. So if you have 20 SMSs, you have to click on the FFw button 20 times before you get to listen to your email. Truly a brilliant design, whoever came up with that. Status as of PR 1.1: Still a problem.
5. In the previous Symbian web browsers, when I hit the Back button, I can either go back/forward using the left/right gestures, and selecting a page by tapping the page. I also have the option of hitting the left or right arrows right above the soft keys and hitting Select (left soft key) or Cancel/Stop (right soft key). In the N8, everything but the Select key is there. Now it's replaced by a blank?!? If you want to force me to use gestures and taps, then at least do me a favor and remove the left/right arrows on the screen. (Surprisingly, if I invoke the web browser using the YouTube "app", the Select soft key appears during back/forward navigation. Hmmm...) Status as of PR 1.1: Still a problem.
6. [New reduction of functionality in PR 1.1] This is truly a new one for Nokia - Breathing Light Notification: In the N8 PR 1.1, when you go to Settings > Phone > Notification lights > Notification light > Events notified, you can now enable/disable 2 events: "Missed call" and "New message". But in PR 1.0, you had a third choice: "New email". Uhm... **bleep**?!? Why would Nokia remove a notification event type?!? Is the business justification that nobody cared enough about the breathing light that having some extra lines of code for notification of new emails would be a waste of precious firmware C:\ drive space?!?
7. No ability to specify which drive to use for Mailbox repository: In the previous iterations of Symbian, I could tell the mailbox which drive to use, the C:\ drive or the mass storage or even the memory card. Now, that flexibility is gone. Why is this a problem? Recently, I was sending a bunch of emails with big attachments, and suddenly, I was notified that C: drive was running out of memory! What do you know? The Sent mail is stored in C:\ drive! That's real smart, considering real estate in C:\ drive is already little to begin with.
List of improvement suggestions:
1. Whenever you're in a screen that has a tiny left/right arrow (such as reading an SMS message, or looking at your Messaging Inbox, allow me to swipe left or right to go to the previous/next message or folder. This functionality already exists in the Calendar app. So why stop there? Not only that, but extend it to Settings menu! Why should gestures be limited to up and down, except for the Calendar application that allows left/right? Status as of PR 1.1: Nokia is still ignoring me on this one.
2. Allow landscape dialer, like the N97. Status as of PR 1.1: Added! Kudos!
3. Uhm, what happened to the Converter application? It has been a staple of all Nokia phones, and suddenly it's missing from the flagship phone? Nokia's comeback phone?!? Status as of PR 1.1: Nokia is still ignoring me on this one.
4. A much simpler VPN application? Look at what Apple did in just a little over a year. A simple process of logging into Cisco VPN. What's Nokia's way, after having VPN solution for years and years? Still a mess. Status as of PR 1.1: Nokia is still ignoring me on this one.
5. Previously, connectivity settings were easier to get to with the N91, N95 and N97. Now, I have A) Menu > Options > Settings > Connectivity > Wi-Fi, and B) Menu > Options > Settings > Connectivity > Settings > Switch to Wi-Fi? I can work around it as a power user. What about those people who make up the biggest market share of iPhone users who are not technologically savvy? And do you see the irony with Settings buried within Settings menu? Status as of PR 1.1: Nokia is still ignoring me on this one.
6. Port all functionalities of PC Suite to Ovi Suite, and fix all the bugs in Ovi Suite. The latest 3.0.0.271 still has bugs and missing functionalities. Open back up the dual code development pipelines (PC Suite and Ovi Suite) to the N8 until all core functionalites are successfully brought over to Ovi Suite. Status as of PR 1.1: Technically this isn't a problem with the firmware on the N8 but rather a problem with PC Suite in disallowing N8 connectivity. Anybody wants to give me an update on the latest version of PC Suite 7.1.5X.X? Since the Nokia "Download software" support site no longer has a link to PC Suite but just Ovi Suite, I suspect PC Suite will never be opened up for N8.
Nokia, I hope this thread captures your attention within the developers and management. Thank you.
John @ Chicago // 5160 (1999.07.20) > 7160 (2001.06.09) > 6340i (2003.04.26) > 6620 (2004.08.24) > 7610b (2005.05.08) > N91 (2006.06.07) > N95-3 (2007.09.28) > N95-3 #2 (2007.12.05) > E51 (2008.03.10) > N97 (2009.06.11) > N97 #2 (2009.09.11-warranty replacement) > N97 #3 (2009.12.10-warranty replacement) > N8 (2010.12.02) > N8 #2 (2010.12.11-retailer replacement) > 808 (2012.12.10) > X2 Dual Sim (2015.01.19-for motorcycle offline maps use only) %gt; 808 #2 (2015.01.26-manufacturer replacement)

How can I export speech analysis text with imbedded timecodes for the creation of subtitle files?

I found a script that allows you to export all your text layers with time codes as a .srt subtitle file. However, instead of multiple text layers, I have only one: essentially the meta data from Premiere speech analysis that with the aid of a different script, is being used at a "subtitle layer". Essentially, I'm trying to use this data to create a .srt file so I can create actual subtitles, not this hybrid animation/text layer.
Here is the script I used to export the text layer to .srt:
Subtitle Exporter v01
Script by Philipp Grolle
www.display-artists.de
Instructions:
Select all the Text Layers you want to export, run the script, and save the file as .srt
Attention: The Script has not been debugged or testet. Try it on your own risk!
// get all the selected Layers
var theComp = app.project.activeItem;
var alleLayer = theComp.selectedLayers;
// count how many layers are selected
var anzahlLayer = alleLayer.length;
// Enable the line below if you want to change the order of your text (ascending / descending)
/* alleLayer.reverse(); */
   // prompt to save file
   var theFile = File.saveDialog("Save the text file.", "untitled.txt", "TEXT txt");
   // if user didn't cancel...
   if (theFile != null) {
      // open file for "w"riting,
      theFile.open("w","TEXT","????");
         // Do it for all the selected Layers
         for (x = 0; x < anzahlLayer; x++)
             // get In- and Outpoint of the current Layer and convert to timecode (00:00:00:00)
            var timecodeIn = timeToCurrentFormat(alleLayer[x].inPoint, 25);
            var timecodeOut = timeToCurrentFormat(alleLayer[x].outPoint, 25);
           // split the value of the inPoint; converting last 2 characters (frames) to milliseconds, and finally join it again with comma instead of colon
            var str_in= timecodeIn;
            var timeCodeAnfang_in=str_in.slice(0,8);
            var timeCodeEnde_in=str_in.slice(9,11);
            var millisek_in = timeCodeEnde_in*40; // 1000 milliseconds divided by 25 fps = 40
            var zusammen_in = timeCodeAnfang_in +"," + millisek_in;
            //split the value of the outPoint; converting last 2 characters (frames) to milliseconds, and finally join it again with comma instead of colon
            var str_out= timecodeOut;
            var timeCodeAnfang_out=str_out.slice(0,8);
            var timeCodeEnde_out=str_out.slice(9,11);
            var millisek_out = timeCodeEnde_out*40;
            var zusammen_out = timeCodeAnfang_out +"," + millisek_out;
            //counter for the number above the timecode (in the results)
            var zaehler = x+1;
            //writing the results to file
            theFile.write(zaehler);
            theFile.write("\r\n");
            theFile.write(zusammen_in);
            theFile.write(" --> ");
            theFile.write(zusammen_out);
            theFile.write("\r\n");
            theFile.write(alleLayer[x].property("Source Text").value);
            theFile.write("\r\n\n");
      // close the text file
      theFile.close();
      // open text file in default app
      theFile.execute();
As I am only using one text layer, it shows me only one continious subtitle in the .srt file. Does anyone have any suggestions?

I should add that I myself am not particularly familiar with scripts or scripting, I'm merely trying all possible solutions to my problem and this seems to be a good approach. Any help would be much appreciated.

Using a different background for the drop down options in a spry menu bar

Hi all,
I am trying to set just a background color in the drop down menu, I have a background image repeated along the x asis at the top but this has come down into the sub menu bar how can I change just the lower drop down menu to just a solid color??
I have tryed google and youtube to try to find a answer but have had no luck in finding the solution to this problem.

Give a man a fish, you feed him for a day. Teach a man to fish, he eats every day…
winabe23, you joined this month—probably because you were having trouble with CSS and HTML and you have certainly come to the right place.
I'm going to send you to several places I have found helpful in understanding how you can make drop-down menus in CSS without the need for JavaScript—though JS may be necessary for certain older browsers that do not understand pseudo classes and may be necessary for the blind or keyboard navigation.
CSS Wizardry has a great tutorial here.
Line25 has one here.
For those who don't want to have to wrangle code, here is a menu generator from PureCSSMenu.
Here's a page by Eric Meyer who describes how the concept works.
And here is a video tutorial by "zorro30mum." It's in two parts, but there is a link to Part 2 below Part 1.
The reason why I am posting all of these links in my answer is because you're using Spry. And Spry has been found wanting by Adobe and they are deprecating and abandoning it.
The Spry framework is an open source Ajax framework that Adobe developed. Ajax stands for Asynchronous JavaScript And XML. On August 29th 2012, Adobe handed over Spry to github. If you want to help github develop Spry, there is a site for that, but I'm thinking you're not a JavaScript developer.
I would recommend you pay a little more attention and time to Ajax, which is not deprecated and not discontinued. It allows you to do client-side triggers for server-side code. But that's if you want to do work in JavaScript, XML and a server-side language, like Cold Fusion, php or ASP.
But in the meantime, the tutorials above will get you into understanding how this whole menuing stuff is done in CSS and give you the understanding necessary to do simple stuff, like changing the color of a background for a drop-down.
I hope this helps you make great websites!
-Mark

10yr customer switching to AT&T from Verizon for the Nokia 900 Lumia

So I've been with Verizon for almost 10 years. That's about $20,000 to $30,000 I've given them. I know that's nothing to a massive company, but I also know that it's not peanuts either. I have been very happy with Verizon during those years (though I have gotten sick of every single other company always having nicer, better, cooler phones). But their service has been good, as well as the customer service. However, I have gotten to a point where I don't like the android phones at all, and don't really like iphones either. I've been sitting on an old HTC TP2 and now am out of contract. I was hoping Verizon would get the 900 Lumia, but it has now been announced as AT&T only. Why does Verizon always have to be the last company to get any sort of innovative phones?
I am about 90% sure I will be switching to AT&T. I don't like the way Verizon clings to their droids, how their salespeople only push one or two devices, and I don't like how they handled their iphone introduction (instead of innovating, they just jumped on the bandwagon a few years too late).
I know that the people interested in Windows Phones are a small minority, but if we can get this thing to trend it might get someone's attention. At worst, make them consider bringing in some new phones. I don't want the dumbed-down 700 series Nokia phone.
Anyone else considering a switch to AT&T?

They did it once already.
On 12.01.2012 20:36, jcb193 wrote:
RE: 10YR CUSTOMER
SWITCHING TO AT||AMP||T FROM VERIZON FOR THE NOKIA 900 LUMIA
created by jcb193 in Windows Phone Discussions - View the full
discussion

I buy for mac app but not for the iPad, so how do I reinstall a program that has already purchased? I need help because I bought the imovie'11 but when he opened it only brought 8 movie trailer templates instead of the 15 it says on the program. How do I

I buy for mac app but not for the iPad, so how do I reinstall a program that has already purchased? I need help because I bought the imovie'11 but when he opened it only brought 8 movie trailer templates instead of the 15 it says on the program. How do I solve this problem? Once paid for a program incomplete. I also liked that the AppStore itself had a button to reinstall programs already bought, because it is very hard to understand how to do this in the store, only option is to install and hide purchase, and how do I reinstall, attention'm talking about reinstalling a computer mac, not an ipad or iphone.
Thank you.

Prodesigntools.com , go ahead and download the software from there and use your serial number to serialize it.

For the attention of "tpodell140"

Similar Messages

Maybe you are looking for