Forbid sending window to front after clicking on it.

I have application with main window in AIR which is maximized on whole screen and a few "small" windows which are created from Window component (Window was the only option 'cause times to time I need move it out of main application) and live above main app window.
I would like to have main app window always in the back and all other "small" windows in front of it. The problem is that whenever I click on main window system brings it to the front. So the question is how can I force AIR not to bring newly focused window to the front? I tried to set alwaysInFront=true on each "small" window (Window.NativeWindow.alwaysInFront) which worked but in the end it brought other problems and I didn't really liked the fact that they were always above all other application windows.
I know that I could use NativeWindow.orderToFront() method and after clicking on main app window send it behind all others but all sent windows into front then blink. Perfect would be to suppress default behaviour and don't let system bring clicked window to front.
Any idea?
//pyso

See if any of these provide pointers.
*Various causes of sleep issues in Macs*
[Post by Dale Weisshaar|http://discussions.apple.com/message.jspa?messageID=8980488] - general post on sleep issues.
[Logitech keyboard drivers out of date after updates|http://discussions.apple.com/message.jspa?messageID=8999415]
[Try safe boot, then rebooting normally|http://discussions.apple.com/thread.jspa?threadID=1906841]
[Mac OS X: Why your Mac might not sleep or stay in sleep mode|http://support.apple.com/kb/HT1776]
[A long list of sleep issue reports and comments|http://www.macintouch.com/readerreports/macosx10_4tiger/topic3083.html ]
Check if third party USB devices or cards are causing problems.

Similar Messages

How to send a predefined email after clicking on an Insert button in a Form?

Hi,
I created my form ( three fields) where I enter a three values.
I want an email be sent every time new values are entered and the insert button clicked.
Do you know a way on how to do it please?
Thanks
Khaled.

Hi,
I do not know of a way within Portal to automatically send an email, but the database has a utility (utl_smtp) that will allow you to do so very easily. You can use Portal to insert your data and then put a trigger on your table that fires after the data is inserted that calls a procedure that will send the mail.
Here is an example of a procedure that I have used to send mail (you can get all of the info on utl_smtp in the Oracle docs). I have a Portal form that allows the user to input three values and once they click 'insert' and the data goes into the table, I have a trigger that fires 'after insert' and runs this procedure:
PROCEDURE send_register_mail (sender in varchar2,
email varchar2,
date_of_class date)
IS
mailhost VARCHAR2(30) := 'my.mailserver.com';
mail_conn utl_smtp.connection;
BEGIN
mail_conn := utl_smtp.open_connection(mailhost, 25);
utl_smtp.helo(mail_conn, mailhost);
utl_smtp.mail(mail_conn, email);
utl_smtp.rcpt(mail_conn, '[email protected]');
utl_smtp.open_data(mail_conn);
utl_smtp.write_data(mail_conn, 'Subject: Platform Training registration request'||utl_tcp.crlf||'Content-Type:text/html;'||utl_tcp.crlf||utl_tcp.crlf);
utl_smtp.write_data(mail_conn, sender||' would like to attend the POC training scheduled for '|| date_of_class);
utl_smtp.close_data(mail_conn);
utl_smtp.quit(mail_conn);
EXCEPTION
WHEN OTHERS THEN
-- Handle the error
htp.p('There was an error processing your registration. Please contact the site administrator');
END;
Hope this helps.
-melissa

Window position incorrect after clicking on a link...

With jdeveloper 10.1.3.2 I used to be able to do right click/find usages/ and double click on one of the usages and the cursor would be placed on the java class and line but now, when I click on the usage, it places me on the proper java class but the line of code isn’t showing on the screen. I have to scroll down to find it.
I would appreciate any help possible with this issue.
I am running on windows xp sp2.
The line is highlighted but it isn't moved into the visible viewing area of the screen as it did with the previous version.
I tried double clicking and it works if you aren't referencing a different class than where you started from.
In other words, if I am in class abc, and i want to find usages for method def, and it lists multiple places, the screen will be correctly positioned for class abc, but for the other classes outside, the line may or may not be highlighted but the selected line isn't centered into view window as it should be and used to be with the previous version 10.3.1.2.
This also happens when debugging, or clicking on the structure window.
The correct line is no longer displayed even though the correct class is being displayed in the window.

Hi,
try 10.1.3.3 - I tested it with this release and here it worked fine.
Frank

Prevent Find and Replace from closing after clicking "Replace All"

With the latest release of Dreamweaver CC (2014.1.1), there's been a minor change to the way Find and Replace works. I use Find and Replace a lot to clean up and delete code, so I might do many searches in a row to get things tidy. With the new version however, the Find and Replace window always closes after clicking "Replace All", which is very cumbersome. I need to open it up again, and it doesn't remember the text I entered to use as a replacement.
Does anyone know if there's a way to prevent this window from closing after doing a Replace All? The previous version of Dreamweaver would keep it open and remember the text either until I changed it or I closed Find and Replace myself.
Any pointers that would get me a little closer to the previous version's functionality would be appreciated!

You need to do a find/change for each code individually, but it should be scriptable to take the .csv file and use it to load the find and change values. I'd try asking this over in the scripting forum: InDesign Scripting

Clicking on Dock icon only brings most-recently-used window to front

In Leopard, clicking on the iChat Dock icon would bring all iChat windows (contact lists, chats, etc.) in front of other open applications, and give focus to the most recently used iChat window.
After installing Snow Leopard, clicking on the iChat Dock icon only brings the most recently used iChat window to the front and gives it focus -- other iChat windows remain behind other application windows (if that is where they were before).
Is this just me? My friend tells me that it still behaves like it did in Leopard on his computer. Any ideas?

In the First Post your Specs said Snow Leopard, now they say Tiger
Sorry, I didn't realize it wouldn't remember that setting for me -- I am running Snow Leopard.
With Chax in Leopard/iChat 4 an extra item was added to the Window menu of iChat that says "Always On top"
No, this is not what I was looking for. I have another machine with Leopard, and it does not have Chax -- iChat windows are not always in front, but they all come to the front when clicking on the Dock icon.
I don't use it on the Buddy List as you can set it on Any iChat window.
What do you mean, "you can set it on Any iChat window"? You mean the Chax setting, or something else?
Are any Minimised to the DOCK ?
No, none are minimized to the Dock.
Chax does not work in iChat 5 and may be the cause of the issue.
There is a beta version of Chax for iChat 5.
I would delete Chax and then the com.apple.ichat.plist to remove any thing in it that refers to Chax and then relaunch iChat.
I deleted Chax and every Chax and iChat plist, then restarted my computer. The problem did not go away -- still, only one window comes to the front when I click on the iChat Dock icon -- the others stay behind other windows.

Cannot send email. When I click Write the window does not open properly. Does not have the "send, spelling, attach security save" line.

Cannot send email. When I click Write the window does not open properly. Does not have the "send, spelling, attach, security, save line there. Then when I click File, then Send now it will not send. A message comes up saying my SMTP server failed. Have check and everything appears to be o.k.

Hi Stephen,
What version of MS Office are you using?
Are you facing the issue similar to that mentioned here: Acrobat/Reader: Attach to Email button not working for PDFs referenced from long URLs
Open Acrobat. Use the click-path Edit - Preferences - select the Category "Email Accounts". In the dialog there is the "Add Account" drop-down. Select "Add Other". The "Add Webmail Account" dialog presents. You'll fill out the dialog's fields with Outlook.com settings. (don't forget the "Advance Settings" button)
From a look-see on the web it appears that the following are the needed settings. BUT, you'll be wanting to validate.
The Outlook.com SMTP server settings for sending outgoing messages from an email program on desktop, cell phone or mobile device are:
• Outlook.com SMTP server address: smtp.live.com
• Outlook.com SMTP user name: Your full Outlook.com email address (not an alias)
• Outlook.com SMTP password': Your Outlook.com password
• Outlook.com SMTP port: 587
• Outlook.com SMTP TLS/SSL encryption required: yes
For incoming messages from an Outlook.com account to an email program using POP, use the Windows Live Hotmail POP3 server settings.
The Outlook.com POP server settings for downloading new incoming messages to email program, cell phone or mobile device are:
• Outlook.com POP server address: pop3.live.com
• Outlook.com POP user name: Your full Outlook.com email address (not an alias)
• Outlook.com POP password: Your Outlook.com password
• Outlook.com POP port: 995
• Outlook.com POP TLS/SSL encryption required: yes
Regards,
Rave

I just purchased Photoshop 13 for PC MS Windows 8.1 In trying to install, I get the following message after clicking on the 2nd file. "The file archive part of Adobe Photoshop Elements 13 is missing. You need all parts in the same folder in order to ex

I just purchased Photoshop 13 for PC MS Windows 8.1 In trying to install, I get the following message after clicking on the 2nd file. "The file archive part of Adobe Photoshop Elements 13 is missing. You need all parts in the same folder in order to extract Adobe Photoshop Elements 13. Please download all parts.: I've also gotten an Exit Code: 7 when trying to install. I've turned my McAfee virus system off while trying to install.

Hi,
Have you tried downloading Photoshop Elements 13 from here?
https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
There is only one file to download - which one depends on your system (32-bit or 64-bit).
These are the trial versions but will convert to the full version when you supply your serial number.
Brian

Macbook froze while online. hard shutdown. when it restarted, an error message appeared saying finder shut down unexpectedly containing a message box with a long list of technical jibberish. after clicking OK that it would send an error report to Apple,

macbook froze while online. hard shutdown. when it restarted, an error message appeared saying finder shut down unexpectedly containing a message box with a long list of technical jibberish. after clicking OK that it would send an error report to Apple, the same error message box appeared again and again every time OK was clicked. Now the macbook will not turn on at all

If you're able to boot, launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post "shutdownStall" or "hang" reports.
If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is slower than normal, and some things won’t work at all.
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.

I get a window pop up after every click into a new site that reads : Safari is no longer responding because of a script on the webpage " ". Do you want to stop running the script, or let it continue? If I click on continue it just continues,

I get a window pop up after every click into a new site that reads : Safari is no longer responding because of a script on the webpage " ". Do you want to stop running the script, or let it continue? If I click on continue it just continues, stop, it stops. How to correct this annoying message?

Disable Javascript for those webpages. Note, your Javascript is probably antiquated by now. Try a different web browser, or contact the website and let them know they aren't as accessible as they could be*:
http://www.macmaps.com/browser.html

Erec - When an External window opens after click of a button

We are using an Standard Webdynpro Erec Appln.
When an External window opens after click of a button the smart form embedded in that windows view is not appearing instead and small X mark (in Red) is appearing with fully plain background
It is happening only for my system, others are able to view it properly...
I have cleared the cache, restarted the system and also re-installed the Adobe Reader too..
But still the problem persists.. Let me know what can be done in this case...
Thanks & regards,
Rashmi

The service that you are trying to use requires integration of adobe with in browser(IE). Check the option [Display PDF in browser |http://lh4.ggpht.com/_E1SpYl0ZbfE/SlI0rfQAxeI/AAAAAAAAAh4/fC9alkf1M78/Adobe_Setting.gif]in Adobe Reader preferences.
If it still doesn't show the PDF, try to reset the browser setting to Medium and re-open.
Regards,
Trikanth Basetty

Whenever a download is finished, my windows toolbar unhides itself. Only after clicking on the download window does it autohide itself again.

I have my windows (7.0) toolbar on auto-hide so that it doesn't clutter up my screen. But whenever I download a file with Firefox, the download window triggers the toolbar to pop up. Only after clicking on the download window does the toolbar rehide itself. Is there a way to get the download complete event to not trigger a windows event (or whatever it is that causes the toolbar to pop up)?
== This happened ==
Every time Firefox opened
== I downloaded files

The showAlertOnComplete didn't work. I downloaded and installed the download manager program and that seems to have done the trick.
Thanks

Firefox tabs close when I click on a tab and windows become unresponsive after I launch a site. Using latest version for MacOSX. How do I fix this bug? Have already tried a bunch of things.

Firefox tabs close when I simply click on a tab and windows become unresponsive after I launch a site. I am using the latest version for MacOSX but this happened a couple days ago with an older version of Firefox as well. Is this some kind of bug? How do I fix this bug? Have already tried a bunch of things like clearing/reinstalling etc. This does not help.
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_8; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

You can middle click a link to open that link in a new tab.
*Open Link in New Tab: https://addons.mozilla.org/firefox/addon/open-link-in-new-tab/
*Tab Utilities Lite: https://addons.mozilla.org/firefox/addon/tab-utilities-lite/

While installing flashplayer the installation manager box is grayed out after clicking on run. My system is Windows 7 64bit and ie 11.

I am not able to play any videos in ie 11 and I am not able to install flash player.
So far I have uninstalled prior installation of flash player. When I visit get adobe flash player sight with ie 11 whole sight box is grayed out. so I tried to download the flash player for ie 11 with chrome and firefox. In both cases after running .exe file downloaded and saved on pc the flashplayer installation manger comes up for permissions. but after clicking run, it is grayed out and nothing further happens. I will appreciate any help in getting this installed.
I have other laptop with Windows 7 professional and ie 11. there is no problem on playing videos in ie11 in this laptop. so why do I have problem in this pc? Only difference is here I have Windows 7 Home premium. Java version 32 and 64 bit are installed and enabled. Silverlight is enabled and adobe shockwave player is enabled, Active x control are disabled. software rendering box is also checked in the advanced tab of ie 11.

Hi vasanthas62986264,
Can you please post a screenshot of the installer dialog window (please see How to post a screenshot in the forum).
Thank you.
Maria

Opening in new window after clicking on h:commandLink

hi,
Please help to display jsp in new window after clicking on <h:commandLink>.
This is what I have written.
<h:commandLink value="Image" action="#{ImageBean.displayActualImage}" target="_blank"/>
So Because of that I am able to display in the jsp in same window. displayActualImage() is function that is redirected to another jsp. But I want to disply it in new window. So can any one please help me.
Thanks.

Hello Koduru,
you should have a look at the work protect modus settings of the user.
Regards
Gregor

Reminders window won't show up after clicking in notifications center

After clicking a notificytion in notifications center on Mavericks the APP Reminders opens but the application window is not showing up. Allways worked like a charme but not any longer for me.
I tried to:
1) uncheck the iClound sync for Reminders while Reminders.app ist closed which deletes all local data!
2) logout my user
3) login again
4) open Reminders
5) check the iCloud sync for Reminders again
After this procedure, Reminder is working again for a day, then again the Reminders window is not showing up, after clicking a notification or open the Reminders.app manualy.
Why is this, any hints?
Cheers

In addition: after I went thru the steps above the applications runs without problems until I close the app again. When now reopening the app will show no windows.

Forbid sending window to front after clicking on it.

Similar Messages

Maybe you are looking for