Force SB-Messaging to use HTTP

HI,
Is there a way of forcing SB-Messaging adapter to use http insteed of tcp?
I am behind a firewall where I can't open the tcp ports.
I did a C# app where I by adding "ServiceBusEnvironment.SystemConnectivity.Mode = ConnectivityMode.Http;" solved the problem.
Can the same be done in BTS SB-Messaging adapter in?
/// Johan

I noticed that even with the WCF-BasicHttpRelay adapter in BizTalk 2013 the adapter requires an outbound connection to port 9351.
The ConnectivityMode.Http setting can be used to direct all traffic over ports 80 and 443. This is especially useful
in customer environments where proxies typically allow traffic to ports 80 and 443 only.
With "netstat -a" I compared the connections between by BizTalk adapter and my custom service. The BizTalk adapter uses an outbound connection to port 9351 and the custom service
does not.
There seems to be no way to change the behaviour of the BizTalk adapter as this adapter does not allow for extensions either.

Similar Messages

Force Reporting Services 2012 use https

I have recently set up a new instance of SQL Server Reporting Services. I have it running and am in the testing phase of the deploy. I have set it up to use SSL and basic Authentication. This all works. The report writer has been able to deploy
reports and start testing. In this testing we discovered that the menu on the left of the report manager in the data sources or reports management window will not use https. So let me explain it more.
If you browse to a report or data source in Report Manager then highlight and click on the down arrow and choose "Manage" you will get a page with the report's or data sources' properties. It will also have a menu on the left with items
like "Subscriptions", "Dependent items", and "Security". If I click on one of these items I get a 404 page error. I can then go to the url and simply put a 's' in the http so it read https and it will work.
Due to security requirements I have had to block all port 80 traffic, if I open port 80 it will work. It only works as http with port 80 open. The menu url never defaults to htts.
I have set the root url to have an https at the front. This made no change.
I tried setting the ReportServerUrl in the c:\Program
Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer\rsreportserver.configfile. I set it to include the https at the front as such https://DNSentry.com/reports.
Yes I changed the url so the Reports is the Report Manager. This broke the entire Report Manager. It would give me an error of:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
I have also tried to force report portal to use https by setting the secureconnectionlevel in \c:\Program
Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer\rsreportserver.config to 2, then to 1 and it gave me an error both times.
The underlying connection was closed: An unexpected error occurred on a send.
If anyone knows how to force Reporting services to use https for all urls or if I am doing something wrong please let me know.

@Diskokid I have exactly the same problem, did you find a solution yet?
-edit- _remove the HTTP from the Web Service URL_
That did it for me. I got an error at first but it turned out that the certificate was wrong. The
machine was named ABACUS but could be reached using reports.company.com. I renamed the machine
REPORTS, requested a certificate and used that certificate to set up SSL and used the following url as a guide to check all.
http://nlsimmons.com/SQLScraps/?p=259

Using HTTP Receive ocation in BizTalk

Hi All,
I want to receive messages by using HTTP Receive location in BizTalk. Below are my steps.
1. Created App pool with .net framework 4 in IIS 7
2. Created virtual directory 'BTSHTTPReceive' with 64bit BTSHTTPReceive.dll with the above app pool in IIS 7
3. Created HTTP receive location in BizTalk with /BTSHTTPReceive/BTSHTTPReceive.dll and started in admin console of BizTalk
Correct me if I am wrong.
Now my question is,
How to send message to HTTP receive location of BizTalk?
Is there any tool to push message to BizTalk via HTTP adapter?
Thanks UK

You need to use post method. however check here what to use based on your requirement.
Also you can set the user authentication/password details in Soap UI.
Before that please go through the sub topics at here to validate if your configuration is correct and make changes if required, be it at IIS level or
at BizTalk host level or at SOAP UI, where ever needed.
Also make sure the account which you are using to post the message has proper access to IIS/Biztalk.
Please mark the post as answer if this answers your question. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Nokia Messaging wont use WiFi-Connection

Im using version 9.6.0.12 of Nokia Messaging for emails on my N96 in german. The phone firmware is version 30.101.
Now the problem is: Ive configured my default access point so that every application first checks if there is one of my known WLANs in range, and if not, uses UMTS to connect to the web.
This works fine with most apps... but Nokia Messaging just ignores it and always establishes a UMTS connection when Ive set its access point to "Default".
I can force Nokia Messaging to use WiFi when I go to "settings -> general -> service info -> access point" and choose one of my WLANs there (instead of "Default"). But it is very impractical to change this setting every time I move to another location.
Is this a bug or is there some way to fix it?

I have the same problem in my x6-00, although i can live without messaging, have all my email accounts configured and use them manually with wifi.
However, the problem is that the lonely planet and michelin guides in the ovi maps use nokia messaging when you click on an email link from there, and it therefore does not work, it says "Email account hasn't been set up yet".
Also, the nokia search does not work correctly if I use nokia messaging results, because it is not set up. This is very annoying because nokia search is great and I would like to use it to seach emails in my folders. If I don't look at search results from NM I can see results from messages (sms) and from Notes, but as soon as I try to look inside the NM results, immediately the Notes and sms messages results became blank.
Another irritating think about nokia email is that it gets all the email messages from IMAP servers, including those that have been marked for deletion or moved to a junk folder. There should be an option to ignore those.

How do I disable the "Security Warning" - encrpted script message when I log in to a website using https ? If I cannot get the website owner to change it's code

''dupe of https://support.mozilla.org/en-US/questions/1027400 - locking''
Whenever I log onto a website via https, I get this message and am unable to have Firefox save my password for the website.
Another user asked this question and it was answered, however, the user was asking in the context of his own website where he was able to change the code.
I am unable to change the code for this website but would like to disable this message and have Firefox remember my password for the user id I type in.
Whenever I log onto a website via https (including my website), I get this message:
Although this page is encrypted, the information you have entered is to be sent over an unencrypted connection and could easily be read by a third party. Are you sure you want to continue sending this information? This is followed below with two boxes, "continue" and "cancel".
In order to connect with the website, I must click on "continue" each time I log onto the website. HOW do I permanently DISABLE this message?
Chosen solution
Firefox gives that error because the page is on HTTPS but your form action is HTTP:
<form action="http://eclipse69forum.com/index.php?app=core&module=global&section=login&do=process" method="post" id="login">
Can you change that to HTTPS?

There is a disconnect here: if the form is being submitted securely, then you would not get that message. So although you may be looking at an HTTPS address in the address bar, Firefox is warning you that your username and password are going to an HTTP address and being transmitted in the clear rather than being protected.
That's definitely not the normal way to set up a login page. Do you want to give the URL of the problem login page to get specific comments? Without knowing more, it sounds as though it isn't designed for secure logins and you may be wasting your time accessing their login form using HTTPS.
Anyway, to answer your question, I don't think there is a way to disable that warning.

Going through messages in PI using http requests

Hi,
I'm researching for an external tool that will handle PI channels.
I'm aware of the stop, start and status actions that can be used in an http request.
But what if I want more detailed information?
For example, if a channel is in status error, is there an http request to get details about the error?
What about messages? Is there a request I can use to find out what messages came through the channel?
So what else can I get using http requests besides the basic 3 actions?
What about RFC calls? Can they be used to get more information on channels/errors/messages?
Someone has a guide, about the http calls/RFC that can be used.
Thanks!

Thing is that one of the requirements is to limit the need to go to SAP and check the errors.
Also, there is a need to watch for certain message, not necessarily if only error occurred and trigger stuff in my application.
The tool I'm working on is an enterprise one that also interacts with other applications in the organization, so if I want to create dependencies between different applications covered in my tool I need to get more information than just the status of the channel.
So, I hope for some additional http calls to get more information, but if there are none, then I'll have to do with what we have

How to convert XML message in text format by using HTTPS-Receiver adapter

Is it possible to convert XML message in text format when we use HTTPS as the receiver adapter?
If yes, how?
Thanks!
Mrudula

Hi Mrudula,
As far as i know there are no content conversion methodology for HTTPS as the recevier adapter.
Also you can read through these links to confirm the same:
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/content.htm
http://publib.boulder.ibm.com/infocenter/wbihelp/v6rxmx/index.jsp?topic=/com.ibm.wbia_adapters.doc/doc/sap_xi/sapximst30.htm
SAP NetWeaver - XML Communication Interface (CA-XML) [original link is broken]
Regards,
abhy
note: reward the helpful.

Scheduling of message using HTTP Adapter.

Hi All,
The scenario is SAP ECC to SAP PI to SAP MII, and we are using HTTP adapter on the receiver side.
The requirement is that, the messages should be sent to MII in the order in which ECC sends it to PI.
Can anyone please help me on how this can be achieved.
Thanks and Regards,
NehaSingh

Hi Neha,
If it is IDOC to HTTP scenario and you use EOIO also you will face a big problem.
It will not work. I have faced the same problem.
Suppose at a same time ECC genaretes 100 IDOC then then in intregration engine it may not reach at same sequecnce as IDOC no.
You can go with IDOC packageing in this case in ECC.
In ECC send the IDOCs as packages.
Also in PI create one Sender IDOC channel with package size.
then before your actual mappinng create a simple mapping program to sort the IDOC based on IDOC number. Then do the actual mapping.
Dont forget to create an Unbounded IDOC structure as source side in Mapping,
Edited by: Debashish on Jul 1, 2011 2:29 PM

XI message with Attachment using Http Adapter

Hi ,
We are using XI/PI 7.0 with Sp09 and Sender Application is SRM and Receiver is Ariba MarketPlace.
We are trying to Send PO with Attachments like Word, PDF etc from SRM to Ariba using Https adapter and from SRM we are using ABAP Proxy. When I did the testing with out any special config, I was able to send the attachments (I can see word doc as part of the payload-attachment) to XI from SRM but this attachment is not going through https adapter from XI to Ariba?
I have read some posts on this but I could not find the answer for my situation. One of the solution is that we can use SOAP adapter but we don't want to use Soap for some reasons.
Please give your thoughts.
Thanks in Advance.
-Laxman

> Thanks for your replies, I am little confused, based
> on your references http can't support attachments.
That is true.
> Also sap help link says Http adapter doesn't support
> attachments and XI adapter also doesn't support.
That is not true. XI adapter (in fact we do not talk of an adapter) supports attachments.
> It means Proxy also shouldn't support because proxy is
> nothing but XI adapter.
This is true, ABAP or Java Proxy are like XI adapter. Therefore it supports attachments.
> But When I send PO with attachments from SRM using
> Proxy connection I was able to pass through XI. So
> how proxy was able to send the attachments and this
> is contradicts to the help documentation.
The online help is wrong.
> We don't want to use SOAP because we are already
> using https adapter and this scenario is in
> production also if we go with SOAP then we have to
> re-import the digital certificate in Java Engine for
> SSL. Attachments are the new enhancement only.
I do not see another solution besides using SOAP adapter in so-called non-SOAP mode. Yes you have to reimport the certificates to J2EE stack.
Regards
Stefan

Is there way to set tofirefox4 to always use https over http?

is there way to set tofirefox4 to always use https over http? instead of getting the message if i want to go to https site instead of http site, is there a way so that firefox will notify me if there isn't a https site instead?

*Force-TLS: https://addons.mozilla.org/firefox/addon/force-tls/
*STS UI: https://addons.mozilla.org/firefox/addon/sts-ui/
*HTTPS Everywhere: http://www.eff.org/https-everywhere

Forcing WLS 6.1 to HTTP 1.0?

          Is there some way to force weblogic server 6.1 to only use
          HTTP 1.0? There are a lot of brain dead browsers out there,
          especially on wireless devices. If there is no way to force
          HTTP 1.0, can the transfer encoding: chunked be turned off?
          -Richard Campbell.


          Hi,
          It is true that WebLogic6.0Sp2 always returns HTTP1.1 even when request is HTTP1.0
          This has been resolved in WebLogic 6.0SP2 RP1.
          --Vijay
          "Ian" <[email protected]> wrote:
          >I am seeing strange behavior on WLS 6.0 SP2 + IIS Proxy as well.
          >
          >I have a web client who operates in HTTP 1.0, making a request
          >to IIS Proxy / WLS Server... and I am seeing a header
          >HTTP 1.1 Continue sent back from WLS ?
          >
          >Why? HTTP 1.1 Continue is strictly a HTTP 1.1 header and
          >cannot be sent to HTTP 1.0 client ?
          >
          >
          >"Srinagesh Susarla" <[email protected]> wrote in message
          >news:[email protected]..
          >> If the request is HTTP 1.0 then the Transfer-Encoding header is never
          >> set.
          >> The response of the server would depend on the request.
          >> Are you having any problems in particular.
          >> Can u post the request headers here?
          >> -nagesh
          >>
          >>
          >> Richard Campbell wrote:
          >> >
          >> > Is there some way to force weblogic server 6.1 to only use
          >> > HTTP 1.0? There are a lot of brain dead browsers out there,
          >> > especially on wireless devices. If there is no way to force
          >> > HTTP 1.0, can the transfer encoding: chunked be turned off?
          >> >
          >> > -Richard Campbell.
          >
          >

HT3529 Is there a way to create, store and use preset messages for use with "Messages"?

Is there a way to create, store and use preset messages for use with "Messages". I often have a recurrinig message to send, after a repeating event, and need to enter the same short message each time. It would be nice to have this short message stored and selectable so that I do not need to enter each time.

found an answer that seems to work:
https://discussions.apple.com/message/17997300#17997300

Retrieve data from a non-peoplesoft application using HTTP Get

I need to retrieve data from a non-peoplesoft application. They want us to submit a HTTP GET request to their URL with a series of parameters. I am thinking about using HTTP Targert connector to accomplish this. Does anyone have sample peoplecode?
Currently we are on 8.51.10 Tools...
If there is any better way .. please let me know ..

I have used HTTP Get to get XML file from a government sanction list by hitting URL http://www.treasury.gov/ofac/downloads/sdn.xml
There is a delivered PS program that does that for vendor sanctions. I had to get the online setup correctly by creating a new custom Node with HTTP Target Connector. The program name is BSP_IMPORT. The below code is responsible for the calling the node and retrieving the data. Play around with the code below see if you can get it to meet your needs.
BSP_IMPORT_AET.BANKNODE.Value is just the custom external code that I created.
PMT_FLAT_FILE_INBOUND message is just a none rowset based message to use the web service call.
Local TR:FileUtilities:FTP &oFTPUtil = create TR:FileUtilities:FTP();
+/* HTTP */+
+/*******************************************************************************/+
Local Message &msgHTTP;
Local Message &msgResult;
+&msgHTTP = CreateMessage(Message.PMT_FLAT_FILE_INBOUND);+
+&oFTPUtil.PopulateFTPGetIBInfo(&msgHTTP, BSP_IMPORT_AET.BANKNODE.Value);+
+&msgResult = %IntBroker.ConnectorRequest(&msgHTTP);+
+/* check to see if the file is wrapped */+
+&strAllLines = &msgResult.GenXMLString();+
+&strAllLines = Substitute(&strAllLines, Char(26), " "); /* Added this line to remove invalid characters */+
+/*******************************************************************************/+
Edited by: Maher on Mar 20, 2012 3:28 PM

How to invoke a web service using https

Hi,
I have a few security related questions surrounding BPEL process manager.
1. Does the BPEL engine have the capability to invoke a web service using https (HTTP over SSL)? Does it automatically do that if partner link URI starts with https:// ?
2. If not, what needs to be done to enable accessing a https based web service?
3. I need to write a web service that accepts a message and updates certain information in the database. The web service will be deployed in an OC4J instance in Oracle App Server. We want to allow the web service to be accessed from BPEL only by users registered in the database. What is the recommended way to pass username and password to a webservice if service is invoked from BPEL process manager? Note that specifying username/password in bpel.xml is not an option.
Thanks,
Pranav

1. Does the BPEL engine have the capability to invoke a web service using https (HTTP over SSL)? Does it automatically do that if partner link URI starts with https:// ?
We currently don't have support for HTTP over SSl. We are working on it to include this functionality in near future.
2. If not, what needs to be done to enable accessing a https based web service?
I am not sure it is possible with current product offering. I will confirm it after discussing with our concerned development group. There is some work going to integrate with Oblix security mechanism [recently acquired by Oracle].
3. I need to write a web service that accepts a message and updates certain information in the database. The web service will be deployed in an OC4J instance in Oracle App Server. We want to allow the web service to be accessed from BPEL only by users registered in the database. What is the recommended way to pass username and password to a webservice if service is invoked from BPEL process manager? Note that specifying username/password in bpel.xml is not an option.
This will be easier to do if we can use Oblix along with BPEL PM. Could you please let us know more about your application so that we can provide you the customized solution till it's part of the product. You can send this query to [email protected] so that our product management team can give you more detailed roadmap regarding this.
HTH.
Thanks,
Rakesh

Calling Web Service from EJB using HTTP Client

Hi,
Scenario:
I need to Call a Web Service from an EJB Application.I used HttpClient for calling the Web Service in the EJB Application. When i call the execute method of the HttpCLient it throws an exception
The element type "META" must be terminated by the matching end-tag "</META>"
The input XML does not have a node called META.
When i call the Web Service using Http Client form an Java Application it is working fine.
Kindly Suggest me the changes/steps that needs to be done
Regards,
S.V.Satish Kumar

Hi Manish,
SOAP adapter does pass the message to XI (this message contains SOAP envelope although XI expects to get message without it), and during the mapping step i get "Runtime Exception in Message-Mapping transformatio~".
I suppose it's because i created proxy manually. I did so because when i imported WSDL, and tried to generate proxy in CRM, i got an error message that said that proxy couldn't be generated because external definitions are only allowed in XI 3. But my XI version is 3.0! And when I generate the same proxy in my R/3 system that is installed on WAS 640, it works.
What can I do?
Cheers,
Anya.

Force SB-Messaging to use HTTP

Similar Messages

Maybe you are looking for