Is there way to set tofirefox4 to always use https over http?

is there way to set tofirefox4 to always use https over http? instead of getting the message if i want to go to https site instead of http site, is there a way so that firefox will notify me if there isn't a https site instead?

*Force-TLS: https://addons.mozilla.org/firefox/addon/force-tls/
*STS UI: https://addons.mozilla.org/firefox/addon/sts-ui/
*HTTPS Everywhere: http://www.eff.org/https-everywhere

Similar Messages

Is there way to set thicker font for Clock widget?

Is there way to set thicker font for Clock widget (including Home and Unlock screens) ?
Solved!
Go to Solution.

As I understand, not by default.
Check on Google Play store if you can find any clock widgets that may suit your needs.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Is there way to remove the bar you use to move a JFrame?

Is there way to remove the bar you use to move a JFrame? I don't want it there for several reasons, if you want, I will give more detail.

I have seen a couple of posts in this forum suggesting to use a JWindow. Well, I can't get a JWindow to work. Here is the sample program I used.
a) Without doing anything type "aaa"
b) use tab key and then enter "bbb"
c) click on text field then enter "ccc"
d) use tab key
e) click on Dos window and use Ctrl-C to kill application
1) What is wrong with the Focus Manager. No caret is displayed in the text field or no 'rectangle' around the button.
2) Why is 'aaa' displayed on the Dos window when you kill the application?
3) I have seen a JWindow used in the JDK1.3 SwingSet2 demo, but it is only used to contain an image. Is a JWindow not meant to be used with other components?
Any comments would be appreciated.
import java.awt.*;
import javax.swing.*;
public class TestWindow extends JWindow
     public TestWindow()
          Toolkit tk = Toolkit.getDefaultToolkit();
          Dimension d = tk.getScreenSize();
          int width = 200, height = 200;
          setBounds((d.width - width) / 2, (d.height - height) / 2, width, height);
          JPanel panel = new JPanel();
          setContentPane(panel);
          JTextField textField = new JTextField(10);
          panel.add( textField );
          JButton button = new JButton("One");
          panel.add( button );
     public static void main(String[] args)
          JWindow window = new TestWindow();
          window.setVisible(true);

Is there any way to set a mail rule using an applescript code?

I just wanted to know if there is a way to set a rule using a applescript, so that I can send it to a friend.

You will need to use OLE on the client, which would further require the use of WebUtil. Here (below) are a couple of MS examples that you would need to convert to pl/sql. There are a variety of Oracle notes which discuss reading and writing to MS Word and Excel. These can likely be used as a starting place to talk to Outlook. There is a WebUtil demo which includes an example of how to write to MS Word. It can be found on the WebUtil home page:
http://www.oracle.com/technetwork/developer-tools/forms/webutil-090641.html
<li> http://support.microsoft.com/kb/160502
<li> http://support.microsoft.com/kb/170262

Best way to set up 'sample songs' using iWeb?

Just upgraded to '09. I remember having to write extra code to get iWeb to open separate music files.
How's iWeb '09? What would be the easiest\most efficient way to set up a sample song list - click on title to have the sample clip open and play?
Do I need to make a page for each clip? Is there a way the clip can open WITHOUT making a page, just as a Quicktime file to be played?
Any help would be most appreciated...
Ben

You'll find a few options and explanations here....
http://www.iwebformusicians.com/MusicPlayers/Players.html

Best way to set up home network using Time Capsule

Hi
My current home network consists of Macbook Pro 17 connected wirelessly, another Mac and few pcs. I have a Time Capsule, new netgear router and several hard drives. At the moment my main drive is plugged in via usb to the mac, however id like to set up a proper mini network where i can at least share several drives between macs, HOWEVER i also want to back up this data via TC, which is why at the moment my hard drive is plugged into the mac, so it can be backed up. Am i correct is saying that TC will not backup netwrok drives?
..any suggestions for best way to set up a network with TC backing up drives?
Thanks

paulsutt wrote:
Am i correct is saying that TC will not backup network drives?
Yes.
..any suggestions for best way to set up a network with TC backing up drives?
You could share the locally-connected drive. That would require that your Mac be on whenever any other network client needed to access the drive.

ESB - Is there a way to set context properties when using esb custom pipeline

Hi there,
I have a situation where I am using a oneway wcf sql custom receive adapter to polling db and a two-way solicit response wcf sql send adapter to update the db and receive a result back.
Now I had got this working by setting the BTS.Operation and BTS.MessageType properties using a custom receive pipeline on the receive port. FOR SOME REASON THESE TWO WERE NOT SET BY THE RECEIVE PORT !!!
Now I have decided to wrap all that in en ESB itinerary by converting the send port into a dynamic one. I get the following error:
Exception of type 'Microsoft.BizTalk.Message.Interop.BTSException' was thrown.
Since I am using the ESB pipeleine - ItineraryReceiveXML I am not able to set the BTS.Operation and BTS.MessageType explicitly in a pipeline neither can I derive a pipeline form the ESB pipeline as it's a sealed class.
So my questions are:
1. Any idea what the above error could be ?
2. Also is there a way I get set context properties using an ESB itinerary as that is the only difference from before, can I do that in a map ?
Thanks
Phanindra

BTS.MessageType is typically set by one of the Disassemblers.
BTS.Operation has nothing to do with the Receive Port/Location and is set by the Engine only when coming from an Orchestration Port.
But, you can set any Property in any Stage with a custom Pipeline Component as you've found.
"Exception of type 'Microsoft.BizTalk.Message.Interop.BTSException' was thrown."
There's usually a lot more to the stack trace. You'll have to include the whole thing.
Finally, what benefit do you expect from adding the ESB layer? This is pretty trivial with an Orchestration.

Photoshop Elements 10 - is there way to set tile to vertical as default?

Have managed to create a AutoHotkey script for keyboard shortcut to tile via Window/Image/Tile but on first use defaults to horizontal. Once changed via Arrange 2up it remembers. Is there a registry hack or a tip or trick? I do side by side all the time and although there is the workaround it's moderately irritating.
Thank you.

Thanks for the fast reply. I'm using Windows 7. Works the same with or without the script which I've set as Control+Z. I was using floating but tried setting tabbed in Preferences but it did not seem to have any effect.
However, Windows>Images>Consolidate All to Tabs worked like a charm and vertical. I'll have to rejig the script so it does the Consolidating first but I do wish it could be adjusted simply in Preferences. I'm not a natural scripter.
Thanks you again for the good advice.

What is the best way to set up Facetime if using multiple computers with one apple ID?

I currently have FaceTime setup on my iPad 2 using my normal appleID, but have just recently upgraded our iMac from Leopard to Snow leopard, and have added FaceTime to that computer as well. So my question is this. If I want to avoid confusion with which device is called when someone calls us using FaceTime, what is the best way to distinguish the devices? Should I try to use a different email address to reach the iMac? Is there a best-known-method for this?

That's a nice system Kevin, and it will work very nicely with Photoshop. I do take it that you have 16Gb RAM in Total?
250Gb SSD is a good size, but you can still run short, and that will affect Windows performance. When you get your system, instal WinDirStat which gives you a graphic display of everything on your drive, like below. Clicking on any of the large areas will tell you what and where they are, so you can think about moving cache folders etc. to one of the HDDs.
Leave the Pagefile.sys on the boot drive. Think about disabling Hyphenate as it takes a ton of space, and too often crashes on wake up.
My Documents
Desktop
Downloads
Look at Bridge cache
iTunes backup
Other stuff like that.
Think about another 500Gb drive just for Photoshop Scratch. Drives are cheap as chips nowadays
Do yourself a favour, and invest $100 in Shadow Protect (or similar if there is such a thing) SP saves incremental backups every 15 minutes (you can set the interval, but it has no impact on performance with a system like yours). If you have a problem you can mount the back up at any of those 15 minute points, and open files from it. You can also make a bootable DVD image of your C drive, and be back up and running five minutes after disaster strikes.
Optimize Performance in Photoshop
Photoshop CC and CC 2014 GPU FAQ
For more ideas, swing by the Premiere Pro Hardware forum. Those guys are serious good at this stuff, and you'll find links tips and ideas.
Happy computing, and have fun with your Creative Cloud® apps.

Is there way to restrict a specific app using profile manager?

I want to restrict a specific app, in this case boot camp assistant, from being able to launch or run for users. I noticed that in the restriction payload section on the Mac Server that you could prevent apps, that are at a specific location, from being used but you cannot seem to pinpoint one particular app instead of all apps in the folder. Does anyone know how to segregate and restrict a specific app?

No you can not. But you can diable all the installed apps, and keep only the default available.
For this do as follow:
Go to setting
General
Restrictions
Apps
Click on Don't allow apps.
(applicable for 6.1.3)
It is strange that after spending for the best phone in the market, we are begging for locking software! Apple is sleeping!
If any one knows the better way then post it.

Prevent user from setting a parameter in url. Always use http session variable

In my xsql page I want to prevent a user from seeing data that he is not allowed to see. I am thinking of implementing this by reading a http session variable (like userid=xxx) to be used in my query. I want to be absolutely sure that the userid variable cannot be set manually by the user, for instance by manipulating the url (like: mypage.xsql?userid=123). How can I do this?

Sorry guys, already found it. Thanks to a reply from our lead-guru Muench on another post in this forum. Look here for the answer:
http://download-west.oracle.com/otndoc/oracle9i/901_doc/appdev.901/a88894/adx10xsq.htm#1023490
Search for "Understanding the Different Kinds of Parameters".

Invoice date always use todays date

Hello!
Is there a user exit we can use to always set invoice date = today? In VF01 or VF04 is it also possible to set system to always use todays date?
Regards

Hi,
This Data Requirement routine works fine with order to billing also. Check in VTFA for the relevant item category which Data VBRK/VBRP routine is assigned. If you have assigned any customer developed routine other than the standard one, try to incorporate the validation of Billing Date = System Date as like Standard Routine 11 = Billing = Today's Date. This is the simplest way we had achieved for order related billing.
Hope this helps.
Thanks
Krishna.

Always Use This IP Address

All my devices connected to the router is using DHCP except from my satellite receiver that is using a static IP, devices connected via ethernet cable is set to 'Always use this IP address' and devices connected via wireless is set to No to 'Always use this IP address' option.
Is that the correct way?

Casterina wrote:
By correct I mean, set Yes to 'Always use this IP address' for wired devices and set No to wireless devices?
Doesn't matter which, its personal choice how you like your network to be set up
Also using DHCP with Always use this IP address option is just the same as a static IP?
Yes and no. For a true static IP, the IP address needs to be set on the device itself not on the router.

Setting PREFIX for DIMENSION_TABLE using OMB Scripting

I'm trying all day to find a way to set PREFIX for DIMENSION_TABLE
using OMB script without success and I'm a little confused now.
First of all Scripting Reference does not mention about PREFIX
property so maybe there is no way to achieve what I want. Consequently
it would mean that GUI interface is "stronger" than OMB Scripting.
Secondly I don't understand why when I issue following command in OMB
Plus:
OMBDESCRIBE CLASS_DEFINITION 'DIMENSION_TABLE' GET PROPERTY_DEFINITIONS
I get nothing (empty output, no errors) and when I execute:
OMBDESCRIBE CLASS_DEFINITION 'DIMENSION_TABLE' GET PROPERTIES
(STEREOTYPE, IS_ABSTRACT, DESCRIPTION)
I get:
class false {}
First result suggests that there are no properties for DIMENSION_TABLE
and second proves that there are at least three.
Is there some type/properties inheritance here?
Can someone explain me this and tell how can I:
1. find all valid types (I would like to set prefix for LEVEL,
LEVEL_ATTRIBUTE, etc. too)
2. find all properties for these types
regards
Tomasz Gajewski

You misunderstood me. I don't want to rename DIMENSION_TABLE. When creating DIMENSION_TABLE with gui I set NAME and PREFIX for each DIMENSION_TABLE and LEVEL.
PREFIX for level is used later during deploy to distinguish attributes from different levels.
Example. If I have a level named LEVEL_NAME with prefix LN and an attribute of it named ID than table generated for this contains column LN_ID.
When I create DIMENSION_TABLE using OMB Script prefix is set same as name (default behaviour that I can't change) and it is to long to use.
Scripting Reference doesn't mention about PREFIX property. Should I assume that the only way to change these values are through OWB GUI?
regards
Tomasz Gajewski

Is there a way to set your Illustrator CC to always save down to CS6 as a default?

At our company a select few of us have been upgraded to CC and most are still on CS6. Is there a way to set saving down to CS6 as a default so we don't need to remember to Save as every time?

No.
Mylenium

Is there way to set tofirefox4 to always use https over http?

Similar Messages

Maybe you are looking for