Force width change of readonly column

Within a drag and drop ADF table, using an outputtext component, the column is shrunk to the width of the contents, likewise if I use an inputtext with the readonly attribute set to true.
How can I force a readonly column to be a width greater than the contents ?
Cheers,
Brent

Thanks Steven,
I've posted it on the JDeveloper forum.
Force width change of readonly column
Cheers.
Brent

Similar Messages

How do I change the border width of a table column?

Hi I am using Studio Edition Version 11.1.1.3.0.
I want to set the border width of columns inside an af:table to something different than the default still haven´t found a way to do this. I have tried setting Border Width property in Style tab of the column but it has no effect. I would apprciate if someone could tell me how to do this or point to some tutorial or blog where I can see how this is done.

I tested it a little more and it seems like what I did is working on normal columns and the reason it isn´t working in my case is because I have two grouping columns (that is two columns containing other columns) and on those columns code like
<af:column sortProperty="BillRef" sortable="true" headerText="#{bindings.Bill.hints.BillRef.label}"
id="tblBillC1" width="85" inlineStyle="border-width:2.0px; border-color:Red;">
has no effect for some reason.
It is the group columns borders that I want to make a little wider so that it is easyer for the user of the table to see the where the table is split into groups.
I will make an example to better descibe what I want to achieve.
If you look at the code below and observe what is achieved when it is run you will see that the borders of the inner columns become green and 10px while the outer columns don´t get blue and 20px and it is the outer columns border that I want to change.
<af:table >
<af:column headerText="Sosial eyðmerking" id="sosCol" align="center"
inlineStyle="border-color:Blue; border-width:20.0px;">
<af:column sortProperty="something"
headerText="something" id="c5"
inlineStyle="border-color:Green; border-width:10.0px;">
<af:outputText value="something" id="ot2"/>
</af:column>
<af:column headerText="#something" id="c7">
<af:outputText value="something" id="ot3"/>
</af:column>
</af:column>
<af:column headerText="Rokn eyðmerking" id="roknCol" align="center"
inlineStyle="border-color:Blue; border-width:20.0px;">
<af:column sortProperty="something"
headerText="something" id="c8" filterable="true"
inlineStyle="border-color:Green; border-width:10.0px;">
<af:outputText value="something" id="ot4"/>
</af:column>
<af:column headerText="#something" id="c9">
<af:outputText value="something" id="ot5"/>
</af:column>
</af:column>
/af:table>

To change the width of a Table Column

Hai Developers..................
I have problem with the Table Column Width.
When am on search state.
The search results are showing in a table.
At that time i want to change the width of the each column with respect to the column content.
Like the jsp table.......
Pls replay with example......
Thanks.

And that is why Swing related questions should be posted in the Swing forum so we don't spend time guessing what you are talking about.
Darn, the [Table Column Adjuster|http://www.camick.com/java/blog.html?name=table-column-adjuster] didn't show up in that Google search.

Can I change a field/column width in a script ?

Can I change a field/column width in a script to be run in SQL Plus? For example, I have a table where field COL1 is a varchar2(200). The table already has data in it. I would like to increase the width of field COL1 to be varchar2(300). Can I do this in a script ? Thank you.

No problem
alter table MYTABLE modify ( col1 varchar2(300) );

Changing datasheet view column width prompts for logon

Hello - I have a SharePoint 2010 farm at work that we are having undesirable logon prompts on at times. A reproducible example is the datasheet view of any library in our site. When a user switches from standard view to datasheet view & then resizes
a column, a logon dialogue box pops up. They can enter their username or cancel - either way they are allowed to continue. This occurs the first time the user tries to make a change to the column width, but not on subsequent attempts. If the view is reloaded
& they attempt to change the width again the logon box pops up again. Users only have read-only access to the view, so they cannot modify it. The 'Modify View' control in the ribbon bar is greyed out.
Background info: Clients are using Windows 7 SP1, Internet Explorer 10 (in compatibility view mode), and MS Office Pro Plus 2010 SP2. SharePoint is 2010 SP1 & June 2011 CU V1 (I know, we need to patch). The site is setup to use NTLM integrated authentication.
All PCs are configured via GPO to add the site to the local Intranet zone. The intranet zone is configured via GPO with medium-low settings & automatic logon in the intranet zone. I have verified the GPO propagation to client PCs and verified that
IE settings are correct for windows integrated authentication to take place.
Any help is appreciated
~james

I am thinking this behavior is not by design. In my environment this is what happens:
A standard user (no modify view rights) changes a column width & gets prompted for credentials. It does not matter what they do - cancel, use own credentials, or use someone else's credentials (with modify rights) - the results are the same.
The view is not changed for everyone, just the local user. The change only applies to the current page load.
Users with modify view rights see no logon prompt.
I just installed Office 2013 with my test VM & the unwanted logon prompt is gone. My opinion is this is an unresolved issue with the Access Web Datasheet, 2010-version active-x plugin. It appears to have been fixed with Access 2013.
I'm going to do some more testing, but this is looking like another reason for an upgrade to Office 2013.
I tried changing the compatibility view settings, user agent string, Browser Mode, and Document Mode. None of the different combinations I tried had any effect on the logon prompt issue.
Any other ideas?
thanks

How do I change the width of a lead column in an enhanced layout ?

I have an enhanced layout in BPS that gets rendered in TPM (CRM2007) application.
I need to increase the width of a lead column in this layout. I saw a bunch of methods in a BADI UPX_LAYOUT_RENDER. There is one to manipulate XML and another to manipulate HTML. Are these my only options? or is there an easier way via config or another BADI?
Cheers
Vijay

Can you share if you have got a solution to this.
Regards
Manga

Increasing the width of Pivot table Columns

Hi Gurus,
Small pivot table --> ( ie having less no of columns which generally can be seen in a single page without scrolling to the right)
If i have a small pivot table , then in the column properties through additional formatting options i can increase the width of an individual column.
However if the pivot table is Big,I am not able to increase the width of the individual column .
I tried setting width in the additional formatting options in the Content Properties( just above Rows and below Section there is a small grey box containing finger).
Now the Content Properties indeed increases the width of the column, but it also increase the width of the whole Pivot Table.
See...If i have a fixed number of columns in a PIVOT Table that do not change with prompt, then this solution work fine...
but the problem comes when the no of columns in pivot Table reduces based on the prompt selected.
In this case the less no of columns tries to occupy the whole width set in the content properties.
In short, with Content Properties the width of the PIVOT Table becomes fixed, irrespective of the no of columns coming.
Also after setting content properties, I am not able to print the report to PDF.
So the Question is... Can we increase the width of a Big Pivot Table whose no of columns keeps on changing based on the prompt....
Big pivot table -->
(ie table having no of columns which exceeds a single window frame and have to scroll to right to see the rest of the columns)
I hope i have not made things messy...
Thanks
Ashish

Ashish,
Yes, you can set a fixed size for these. I'm sure you are fixing these because of PDF issue which might be irregular in sizes. Just play arnd with Custom CSS options.

Changing printout report column colour

Hi
How I can change the colour of the column in out put report.
we have one Z report, in that couple of lines are in green in colour.
If I take a print in dot matrix printer, the Green colour over lapses (lines will over lap the numbers) on the value in that particular column.
so I have to change the green colour to some other colour.
What should i have to do.
Thanks in advance.
Regards,
dhan
Edited by: DHANAVEL SUNDARAM on Mar 9, 2011 2:27 PM

Hello Amit,
In a Classical Report (as opposed to a Interactive report) do the the following:
. Under the "Report Attributes"
. Click the edit icon in front of the column you want to set the width of,
. Under Column formatting you will find a text item with the name CSS Style.
There you enter
display:block;width:250px;
(or any other width you need, ofcourse)
Hopes ths helps you
regards Wouter

Password being forced to change every next day.

Hello,
I have this one user who is being forced to change the EBS password evry next login. He alswys being asked to change the password every next day.
What could the Possibly the issue?
Password expiration is set none. and there is no specific settings done in profile options for sign on. but only this user is facing this issue.. any idea?
RDBMS : 10.2.0.4.0
Oracle Applications : 11.5.10.2
regards,
Kamlesh

Please check the values of the following columns in APPLSYS.FND_USER table.
PASSWORD_DATE
PASSWORD_ACCESSES_LEFT
PASSWORD_LIFESPAN_ACCESSES
PASSWORD_LIFESPAN_DAYS
How to find users whose passwords have expired before using the bulkload utility. [ID 406970.1]
Where Is "Password Expiration" Information Saved? [ID 427785.1]
Thanks,
Hussein

How to implement Force password change during authentication

Description of problem
Our client requires web applications to support its internal security policy beyond
normal authentication. This includes:
- force password change periodically. This should be performed at logon time.
- maintain password history so that a new password would not repeat any of its
previous 15 changes.
We already have an authentication server that satisfy these requirements. However,
we would also like to base our solution on WebLogic security framework so that
we can leverage the benefit of the container-managed declarative security (e.g.
we don't need to use our special cookie to check whether a user is authenticated
for every web page in the application). So the best scenario for us is to wrap
up this authentication server using WLS 7.0 authentication SSPI.
My initial investigation of WLS 7.0 security framework (based on edocs and the
sample customer security provider codes) convinced me that overall, this is achievable.
However, I am still left with quite a few questions, which I would like to get
your help.
Questions:
1. (web container) The J2EE-standard container-based authentication is to specify
<login-config> element. My understanding is that only FORM based authentication
is applicable. The specified form elements:
<form method="post" action="j_security_check">
<INPUT TYPE="TEXT" NAME="j_username">
<INPUT TYPE= "password" NAME="j_password">
</form>
is adequate for authentication. However, if the authentication service provider
indicates that password change is needed, what would be the most appropriate way
within WebLogic for the authentication service provider to pass such a flag to
the web container know so that our application can access it? I guess, a simpler
question, would be, using the standard <login-config>, webapp knows only about
authentication fails or succeeds. Can it possibly know more information provided
by the authentication service provider right after authentication?
2) If we don't use standard FORM-based authentication, we will code up our own
authentication control, which could give us a lot more flexibility, but can we
then bind our Subject obtained through our authentication control to the WebLogic
Subject that is running the webapp.
3) (Authentication service provider) Our design is for the custom LoginModule
to delegate login calls to the authentication server, and throws more refined
exceptions such as: FailedLoginException, PasswordExpiredException, UserAccountLockedException
(all subclassed from LoginException). Another approach is to provide detailed
information such as password expired in callbacks. Either way, when Authentication
service provider returns, how our web application can access this refined flag
of authentication result.
4) Can our customer authentication service provider use DataSource defined in
a weblogic server? I ask this question because DataSource itself is a protected
resource of WebLogic. Will referencing it during authentication initiate another
authentication cycle?
Can anyone who has experienced similar requirements and worked solutions please
give me a hint? I appreciate your guidance.
regards
Licheng

"Licheng" == Licheng <[email protected]> writes:
Licheng> Description of problem
Licheng> Our client requires web applications to support its internal security policy beyond
Licheng> normal authentication. This includes:
Licheng> - force password change periodically. This should be performed at logon time.
Licheng> - maintain password history so that a new password would not repeat any of its
Licheng> previous 15 changes.
Licheng> ..
Licheng> We already have an authentication server that satisfy these requirements. However,
Licheng> we would also like to base our solution on WebLogic security framework so that
Licheng> we can leverage the benefit of the container-managed declarative security (e.g.
Licheng> we don't need to use our special cookie to check whether a user is authenticated
Licheng> for every web page in the application). So the best scenario for us is to wrap
Licheng> up this authentication server using WLS 7.0 authentication SSPI.
I believe it's impractical to fit the requirement of forcing a password change
into the standard JAAS interface.
I think the only practical way to do this is to implement a servlet filter that
reads the persistent record of the logged-in user to check for a "force change
password flag". If it finds this, the servlet filter will forward to a page to
change your password. Note that the servlet filter may be hit again when
trying to get to the change password page, so it needs to know to not do the
check in that case.
If you implement this, I would strongly urge you to softcode the "change
password" page URL in your system configuration, and not hardcode it in the
servlet filter.
===================================================================
David M. Karr ; Java/J2EE/XML/Unix/C++
[email protected] ; SCJP; SCWCD

How do you keep your purchased apps if you are forced to change your Apple ID?

How do you keep your purchased apps if you are forced to change your Apple ID? A good example is if you are forced to change your email, which you use as your Apple ID. what if it is a security app and you lose a lot of data if you lose the app? Why are the apps tied to the Apple ID rather than the user? Why is it impossible to globally change the Apple I D?

All content is tied to the account, but you can change the primary email address on an account e.g. you can log into your account via the Store > View Account on your computer's iTunes and there should be an Edit button to the right of your account id on your account's page, or similarly on your iPad try tapping on your id in Settings > iTunes & App Store and view your account. Or you can update it by logging into it via this page http://appleid.apple.com . You shouldn't lose any content on the account if you update it.
After updating the account you may need to log out of your iPad by tapping on your id in Settings > iTunes & App Store and then log back in with the updated version for it to be 'refreshed' on it

How to track changes in text [column type] changes in MDM

Hi,
How to keep track changes in Text[column type] in MDM tables.Is it the only way that I have to declare it as Name field?

Hi,
You keep track of changes for a field by enabling change tracking for that field in MDM. This functionality is available in the MDM Console.
For more information please have a look at the MDM Console Reference Guide -> Part 4: Repository Maintenance -> Other System Tables -> Change Tracking Table
The MDM Console Reference Guide can be found in http://service.sap.com/instguides -> SAP NetWeaver -> Release 04 -> Operations -> SAP MDM -> MDM 5.5 SP02 - Console Reference Guide
Hope this helps,
Richard

Changing number of columns on master page, does not affect pages?

I create a master page. say three columns per spread.
I go to actual pages, flow my type in with the loaded cursor and holding the shift key... it works like a charm... text flows in the three colums, adding pages until the end of the manuscript...
Now I decide I don't like the three columns. I go to the master page and change to 4 columns via "margins and columns..." under LAYOUT menu
I go to the pages assuming that any change in a masterpage will translate to the pages... NOT!
If I go to to my first page, the type is still in three colums...
All other changes I make on the masterpage do translate to the pages... like say a color bar at the top, the size and font of the folios... BUT NOT if I change the number of columns???
Can anyone shed light on this?

You MUST tick the Option for "Master Text Frame" when Creating a new document.
OR you MUST include a Text Frame with the number of Columns on the master page.
Copy the text to the clip board
Delete all page except page 1
remove the existing text frame.
Drag the Master A to the page 1
CTRL or CMD (MAC) click shift the text frame to break it from the master.
Now paste your text in here
Insert a new page
And click the Overload (red cross) button and connect it to the page 2 hodling down shift.
From memory - hope I got it right !

Why can't I login into my Apple account without being forced to change my password.

I received an email from Apple:
"The following changes to your Apple ID (xxxxxxxxxxxx) were made on 01 January 2015 at 17:52:54 (GMT):
Shipping and/or billing address.
When I log on to check my Shipping and Billing address I am prompted to change my password, which I do NOT want to do.
I cannot go any further than the forced password change screen.
How do I check my account details without changing my password?
I am not happy with being forced to change my password. it almost makes me wonder if I have been redirected to a 'scam' site.

How are you trying to log into your account ? You can log into an account :
- via the 'manage your apple id' button on http://appleid.apple.com
- Store > View Account menu option on a computer's iTunes
- tapping on the id in Settings > iTunes & App Store on an iOS device
All three let you view and/or change your billing address, though only the last you let you view payment details. You could try one of the other methods and see if they let you login without requesting a password change.
This page lists the current requirements for passwords : Security and your Apple ID.
If you want to check your account's purchase history then you can do so via the Store > View Account menu option on your computer's iTunes, or you can view the last 90 days purchases via http://reportaproblem.apple.com

Change Table control Column Header text dynamically

Hi,
I have an requirement to change table control column header text dynamically.
i.e. I have about 10 columns in table control, out that need to change 5 columns header text. These header texts are stored in an internal table.
I had looked into the below link but could not get exactly how to do it.
Dynamic headers in table control
Could you please tell me how to do that.
Thanks in Advance.

Hi Saba,
What you will need to do is this.....
1. First replace the column Header Text box by I/O Fields and name them accordingly.
Say for example we will consider the same example which i had explained in the link.
there in the column header we want the header to change when some dates and entered into two fields which are out of table control say
Start Date: 01.01.2010 to End Date: 06.01.2010
Now we want the header to look like this,
Column No.    -        1               2             3                  4               5               6
Header label   -    01/FRI       02/SAT     03/SUN       04/MON     05/TUE      06/WED
Header name -    SPOTS1   SPOTS2    SPOTS3      SPOTS4     SPOTS5    SPOTS6
then you go as per the instructions in the link......
Let me know if you need further help,
Hope this solves your problem....
Regards,
Abhijit G. Borkar

Force width change of readonly column

Similar Messages

Maybe you are looking for