Forcing a non batch-input mode

Hello!
Here's the question: Is there any way to reset 'sy-binpt' global value while i'm running a call transaction?
I know there is a variable called 'NOBINPT' which i can pass to 'CALL TRANSACTION' but there's a problem: If i use it, any actions i am storing in BDCDATA (values, OK_CODE's, etc) are not executed in the standard transaction. (I really don't know why and i wonder: what is this 'NO-BINPT' value for?)
I hope you can help me.
Thanks in advance.

Hi,
The system field available is SY-BINPT, i.e. Batch Input Field. When you are executing in batch input or background processing or from SE38, use the option of Execute in Background, the above field will get enabled.
You can not change the system fields.
But you can modify the code accordingly when it is enabled or disabled.
Regards,
Santhosh.

Similar Messages

Error in Batch Input Mode - SHDB

Hello All,
Could you help me, please?
I did a mapping on SHDB for transaction MD81, I test this mapping in a production copy with suporte pakage 30 for version 4.7, and when I simulate this batch in background mode, it returns the following message:
"No batch input data for screen SAPLCOZF 2300" (Message no. 00344)
But if I simulate it in mode A or mode E it works properly.
In procutcion this mapping working properly with any mode (using suporte pakage 28).
I tried to found if the suporte pakage changes something in MD81, but I didn't find any note about that.
Somebody have any ideia about that?
Thanks in advance.
Fernando Pena.

Hi Fernando,
Have you checked the date or time or decimal formats of the user running the program.
If we do not handle these, in back ground system will raise an error or information messages which we might not be handling.
Regards,
Subhani.

Idoc ACC_GL_POSTING in batch input mode gets error

hi,
In ACC_GL_POSTING, msg type ACC_GL_POSTING01 with process code 'BAPI' it is working fine for me if i run normally.
whereas in transaction 'OBA7' for document type 'SA' if I set batch input only enabled i get error message 'Document type SA is only defined for batch input'. what is problem and how to solve it.
thanks in advance.

Team
I have been ckecking the problem and the problem is not FF68; it has more focuses with BSEG-ZFBDT and use of SGL indicators, and according the explanation below described I have decided to take other approach to resolve the problem.
"Please note that the due date field is as per standard design as per the SAP note 95079.
Field BSEG-ZFBDT is hardcoded in most FI screens to be mandatory and cannot be influenced by any field status changes. This situation only valid when posting with special G/L indicator (downpayment).
The reason behind this is that this special GL screen and the data entered here are very important to many other programs. This data affects liabilities and receivables where due date is necessary almost everytime."
I want to say many thanks to try to help me.
Ismael

Restriction XD01 batch input mode

I have a specific program to create customer master. This program executes a batch input with Xd01 transaction code. How is it possible to use this program without giving XD01 transaction code to the user?

Solution found using an enhancement implementation in SAP program SAPMF02D
Edited by: Benjamin CABOT on Aug 26, 2008 3:55 PM

Batch Input for VA31 and adding new partner

Dear All,
I have a already well running program, which is creating new scheduling agreement via transaction VA31 in batch input mode.
Now, there is a new requirement to add one partner in the header. I made a recording and saw that there is a subcreen SAPLV09C. I extended the program, but doesn't matter I'm doing I always get the message:
No batch input data for screen SAPMV45A 4002
Does anyone has experience with adding new partners in the header and can explain me how to make the right development.
Thanks in advance.
Klaus

Hi Klaus,
If you get the error No Batch input data for screen proceed as follows:
1. In the Installation Assistant mark the foreground checkbox (in the column FG of the Installation Assistant project view) of this specific eCATT.
2. Activate the project again.
3. Run the eCATT in foreground
seee this links
ftp://ftp.software.ibm.com/software/websphere/integration/wbiadapters/library/doc/pdf/mysap4/mysap4_60.pdf
www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm - 9k -
thanks
karthik
reward me if usefull

Batch-input to transaction SM34

Hello,
I need to create a batch-input for the transaction SM34.
I have done a recording but there is a screen(dialog structure) that only appeares when I call the transaction without batch-input mode. So, I have done the recording with the option "Not a Batch-input Session". But the recording gives the TCODE "=%_GC 117 22" when I do double-click for displaying the details and when I try to call the transaction (options-nobinpt = 'X') from my report, this TCODE doesn't work.
Does anybody know if there is another way to display these details, without doing double-click? Or another way to pass this TCODE?
Thank you very much,
Maite.

Hello,
I've solve my problem on my own.
I don't need to call the details by a double-click, I can go to Table View --> Other View. The TCODE of this option doesn't give any problem in the Batch-input.
Maite.

Batch Input in RFC function module

Hi,
I am creating a function that change the location of an equipment in transaction IE02. When i execute this function from SAP it works fine, but when its call from .Net connector does not work, no changes to equipment are realized. i am using call transaction to generate a batch input mode.
i have used submit to programs with the necessary code to execute call transaction IE02 but the results are the same.
How can i execute a batch input from rfc funtion module?
thanks,
Alejandro
Message was edited by: Alejandro López

Alejandro,
Tengo problemas similares con una rfc y batch input.
Serías tan amable de enviarme el código de la rfc para revisar, chequee los permisos pero igual no actualiza datos.
Gracias.

Choose alternative BOM in batch input

Hi!
I'm starting using BOM alternative and I'm facing a problem. I have a batch input where I need to choose an alternative BOM, but the popup for choosing the alternative doesn't show up when in batch input mode.
Does anybody have a clue?
Regards.
Fabio Scaravelli

TAJUDDIN,
I think this thread is SD, because the transaction is VA01 (I forgot to mention it, sorry). The BOM usage is 5 (Sales and distribution).
I need to choose an alternative BOM among two ones. But when VA01 is ran in batch input mode, the popup for choosing the alternative doesn't show up and the first alternative is selected by default.
Regards.
Fabio Scaravelli

BDT - Business Data Toolset and batch input

hi
i want to creat batch input for transaction REBDBE .
i use transaction shdb in order to creat batch input - i record my moved and the despite the messege that this table record was updated i go to the table using se11 and i dont see that it was NOT updated ( i am doing the same actions but without rcording and using shdb and table record was updated )
does anyone has an idea what can cause that???
thanks

Does the problem happen when you
1) do the (initial and only) record with SHDB,
2) or is it when you execute the program generated by SHDB?
For option 1), I think it can't happen, or there is a bug in the sap standard REBDBE (one possibility is that the standard tests for the SHDB mode and works differently from normal use, and there would be a bug in that case). In that case, ask sap support.
If it's with option 2, did you try to do a screen by screen execution? (execution mode "A")
You may also try to change another flag in the launch screen, there is a flag which by default stops the call transaction after the first commit work, sometimes it is a bad option. There is also another flag which allows to make the system believe it should work as in normal use instead of "batch input" mode.
Other possibilities :
- check that you don't have custom code in the standard programs
- check that you have removed all breakpoints when you execute, it may disturb the screen processing when it displays debugger screen ; it may only happen if you use the "old debugger"
Note that business data toolset usually proposes a direct input mode (see sap documentation), but that's far more complex to use than batch input.

Batch Input Problems with CS01

Hi all,
      I have written a batch input program to create new material BOMs using CS01. The BOM gets its effective date from an ECM number which is entered into the RC29N-AENNR field in cs01. When the enter key is pressed to submit the data from the screen a warning message is posted by SAP to say "Date dd.mm.yyyy copied from change number".
This is all very well in manual input mode, where the message can be cleared by the user, but in batch input mode it stops the program dead in its tracks, and causes the whole batch input session to barf.
Can anyone tell me how I can clear this message in code so my program can proceed with adding the new BOM?
Thanks in advance,
Mark Wheaton

hi mark
in that particular screen add one more line in the coding like
perform bdc_field    using 'BDC_OKCODE'
                                  '/00'. or '=OKAY'
and you run in foreground then see what it happens
cheers,
sasi

Error exec. Background Mode a Batch-Input using KP26 Transaction Code

I have a program that build a Batch-Input based on transaction code KP26.
I encounter the following error :
Field Z-BDC02(1) is not an input field (Program : SAPLKPP2 Screen : 0112)
When executing in background I got the error and when executing in Foreground, it is OK.
I use SHDB to look at the field needed and it gave me the same field to use.
Here is an extract of my program for the field I have the issue on :
    PERFORM F100_BDC_FIELD USING 'Z-BDC02(01)' I_T01-LST.
    PERFORM F100_BDC_FIELD USING 'Z-BDC05(01)' I_T01-SPRED.
    PERFORM F100_BDC_FIELD USING 'Z-BDC07(01)' I_T01-TOV.
    PERFORM F100_BDC_FIELD USING 'Z-BDC08(01)' I_T01-TOF.
Any one have an hint to solve this ?

Hi,
Just one remark: batch input is always executed in synchronous mode (hopefully, otherwise we would get many lock issues during mass updates!) Or is there something I missed?
Same thing when you use BDC_INSERT, CTU_PARAMS is ignored ([SAP note 1437811 (Batch input: BDC_INSERT parameter CTUPARAMS)|https://service.sap.com/sap/support/notes/1437811 ])
About the issue, I don't know, so maybe explain more about the context: for instance, do you run the session under a different user? (for instance, the user could be assigned a transaction/screen variant with table control variant, that protects some fields) Do you have one transaction in the batch input session or are there several ones. Try with one only to see if it works. If yes, then maybe it's something in memory that changes the "input-capability" of the field after the first transaction.
Sandra

Batch-input FB05 Cost Center -A mode - N mode

Hello,
When i execute a FB05 batch-input in mode A (visible) , the program post every document right , but when i try to execute in mode N a error message return in the messanges internal table.
"No batch input data for screen & & "
So i´ve checked many times the screen where i inform the Cost Center , and everything seems right. I suspect that it is a pop-up , and the program could not read properly this screen in N mode .
Anybody has passed for this situation ? What i need to do to make this work in N mode .
Ps: i´ve tried play with many option on the call transaction options ,
like :
T_CTU_PARAMS-UPDMODE
T_CTU_PARAMS-RACOMMIT
T_CTU_PARAMS-DEFSIZE
T_CTU_PARAMS-NOBINPT
T_CTU_PARAMS-NOBIEND
thank a lot
best regards

follow
SELECT BUKRS KUNNR BELNR BUZEI
         INTO TABLE T_BSID
          FROM BSID
          FOR ALL ENTRIES IN T_BATCH_AUX
           WHERE BUKRS EQ T_BATCH_AUX-BUKRS
            AND KUNNR EQ T_BATCH_AUX-KUNNR.
IF SY-SUBRC = 0.
    LOOP AT T_BATCH INTO WA_BATCH.
      T_BSID_AUX = T_BSID.
      DELETE T_BSID_AUX WHERE KUNNR NE WA_BATCH-KUNNR.
      READ TABLE T_BSID_AUX INTO WA_BSID
                WITH KEY BUKRS = WA_BATCH-BUKRS
                         KUNNR = WA_BATCH-KUNNR
                         BELNR = WA_BATCH-BELNR
                         BUZEI = WA_BATCH-BUZEI.
      MOVE SY-TABIX TO W_TABIX.
      PERFORM ZE_MOVER_BDC USING:
           'X'    'SAPMF05A'                        '0122' ,
           ' '    'BDC_CURSOR'                      'RF05A-XPOS1(02)',
           ' '    'BDC_OKCODE'                      '=SL',
           ' '    'BKPF-BLDAT'                       WA_BATCH-DTA_DOCTO,
           ' '    'BKPF-BLART'                       WA_BATCH-TP_DOCTO,
           ' '    'BKPF-BUKRS'                       WA_BATCH-BUKRS,
           ' '    'BKPF-BUDAT'                       WA_BATCH-DTA_LCTO,
           ' '    'BKPF-MONAT'                       WA_BATCH-PERIODO,
           ' '    'BKPF-WAERS'                       WA_BATCH-MOEDA,
           ' '    'BKPF-XBLNR'                       WA_BATCH-REFERENCIA,
           ' '    'BKPF-XBLNR'                       WA_BATCH-TXTCAB,
           ' '    'BKPF-BKTXT'                       WA_BATCH-TXTCAB,
           ' '    'RF05A-AUGTX'                      WA_BATCH-TXTDESC.
        ' '    'FS006-DOCID'                      '*'.
      PERFORM ZE_MOVER_BDC USING:
          'X'    'SAPMF05A'                        '0710' ,
          ' '    'BDC_CURSOR'                      'RF05A-XPOS1(03)',
          ' '    'BDC_OKCODE'                      '=PA',
          ' '    'RF05A-AGBUK'                     WA_BATCH-BUKRS,
          ' '    'RF05A-AGKON'                     WA_BATCH-KUNNR,
          ' '    'RF05A-AGKOA'                     'D',
          ' '    'RF05A-AGUMS'                     WA_BATCH-CDRZE,
          ' '    'RF05A-XNOPS'                     'X',
          ' '    'RF05A-XPOS1(03)'                 'X'.
      PERFORM ZE_MOVER_BDC USING:
          'X'    'SAPMF05A'                        '0731' ,
          ' '    'BDC_CURSOR'                      'RF05A-SEL01(01)',
          ' '    'BDC_OKCODE'                      '=PA',
          ' '    'RF05A-SEL01(01)'                 WA_BSID-BELNR.
      PERFORM ZE_MOVER_BDC USING:
          'X'    'SAPDF05X'                        '3100' ,
          ' '    'BDC_OKCODE'                      '=OMX',
          ' '    'BDC_SUBSCR'                      'SAPDF05X',
          ' '    'BDC_CURSOR'                      'DF05B-PSSKT(01)',
          ' '    'RF05A-ABPOS'                     '1'.
      PERFORM ZE_MOVER_BDC USING:
          'X'    'SAPDF05X'                        '3100' ,
          ' '    'BDC_OKCODE'                      '=Z-',
          ' '    'BDC_SUBSCR'                      'SAPDF05X',
          ' '    'BDC_CURSOR'                      'DF05B-PSSKT(01)',
          ' '    'RF05A-ABPOS'                     '1'.
      PERFORM ZE_MOVER_BDC USING:
          'X'    'SAPDF05X'                        '3100' ,
          ' '    'BDC_OKCODE'                      '=OSU',
          ' '    'BDC_SUBSCR'                      'SAPDF05X',
          ' '    'BDC_CURSOR'                      'DF05B-PSSKT(01)',
          ' '    'RF05A-ABPOS'                     '1'.
      PERFORM ZE_MOVER_BDC USING:
          'X'    'SAPDF05X'                        '2000' ,
          ' '    'BDC_CURSOR'                      'RF05A-XPOS1(01)',
          ' '    'BDC_OKCODE'                      '=GO',
          ' '    'RF05A-XPOS1(01)'                 'X'.
      PERFORM ZE_MOVER_BDC USING:
          'X'    'SAPDF05X'                        '0731' ,
          ' '    'BDC_CURSOR'                      'RF05A-SEL01',
          ' '    'BDC_OKCODE'                      '=GO',
          ' '    'RF05A-SEL01(01)'                  WA_BSID-BUZEI.
      PERFORM ZE_MOVER_BDC USING:
          'X'    'SAPDF05X'                        '3100' ,
          ' '    'BDC_OKCODE'                      '=OMX',
          ' '    'BDC_SUBSCR'                      'SAPDF05X',
          ' '    'BDC_CURSOR'                      'DF05B-PSSKT(01)',
          ' '    'RF05A-ABPOS'                     '1'.
      PERFORM ZE_MOVER_BDC USING:
          'X'    'SAPDF05X'                        '3100' ,
          ' '    'BDC_OKCODE'                      '=Z+',
          ' '    'BDC_SUBSCR'                      'SAPDF05X ',
          ' '    'BDC_CURSOR'                      'DF05B-PSSKT(01)',
          ' '    'RF05A-ABPOS'                     '1'.
                                                                                PERFORM ZE_MOVER_BDC USING:
          'X'    'SAPDF05X'                        '3100' ,
          ' '    'BDC_OKCODE'                      '=KMD',
          ' '    'BDC_SUBSCR'                      'SAPDF05X ',
' '    'BDC_CURSOR'                      'DF05B-PSSKT(01)',
          ' '    'RF05A-ABPOS'                     '1'.
      PERFORM ZE_MOVER_BDC USING:
          'X'     'SAPMF05A'                        '0700' ,
          ' '     'BDC_CURSOR'                      'RF05A-NEWKO',
      ' '     'BDC_OKCODE'                      '/00',
          ' '     'BKPF-XBLNR'                      WA_BATCH-REFERENCIA,
          ' '     'BKPF-BKTXT'                      WA_BATCH-TXTCAB,
          ' '     'RF05A-NEWBS'                     WA_BATCH-CH1,
          ' '     'RF05A-NEWKO'                     WA_BATCH-CTA.
      PERFORM ZE_MOVER_BDC USING:
          'X'     'SAPMF05A'                        '0300' ,
          ' '     'BDC_CURSOR'                      'BSEG-WRBTR',
          ' '     'BDC_OKCODE'                      '/00',
          ' '     'BSEG-WRBTR'                       WA_BATCH-VALOR,
          ' '     'BSEG-VALUT'                       WA_BATCH-DTA_LCTO.
      PERFORM ZE_MOVER_BDC USING:
          'X'     'SAPLKACB'                        '0002' ,
          ' '     'BDC_CURSOR'                      'COBL-KOSTL',
          ' '     'BDC_OKCODE'                      '=ENTE',
          ' '     'COBL-KOSTl'                      WA_BATCH-CENTR.
    PERFORM ZE_MOVER_BDC USING:
        'X'      'SAPMF05A'                        '0300' ,
        ' '      'BSEG-WRBTR'                       WA_BATCH-VALOR,
        ' '      'BDC_OKCODE'                      '=BU'.
    PERFORM F_EXECUTA_TRANSACAO.
    PERFORM F_MENSAGEM.
    CLEAR: INT_BDC, T_BDCMSG, W_TABIX, W_POSICAO.
    REFRESH: INT_BDC, T_BDCMSG.
ENDLOOP.
Form f_executa_transação
Call-Transaction parameters
CLEAR T_CTU_PARAMS.
A: show all dynpros E: show dynpro on error only
N: do not display dynpro
T_CTU_PARAMS-DISMODE = P_MODE.
S: synchronously A: asynchronously L: local
T_CTU_PARAMS-UPDMODE = 'S'.
T_CTU_PARAMS-RACOMMIT = 'X'.
T_CTU_PARAMS-DEFSIZE = 'X'.
T_CTU_PARAMS-NOBINPT = 'X'.
T_CTU_PARAMS-NOBIEND = 'X'.
*Executa a transação
CALL TRANSACTION W_TRANS USING INT_BDC
                          OPTIONS FROM T_CTU_PARAMS
                            MESSAGES INTO T_BDCMSG.
ENDFORM.                    " f_executa_transacao

Question create a batch input session in display mode

Hi, i have a batch input, with this three functions
CALL FUNCTION 'BDC_OPEN_GROUP'
CALL FUNCTION 'BDC_INSERT'
CALL FUNCTION 'BDC_CLOSE_GROUP'
when i execute the program, i need to see the batch input session in display mode. I need to see all the screens.
I try with
DATA: PARAMETROS LIKE CTU_PARAMS.
PARAMETROS-DISMODE = 'A'.
CALL FUNCTION 'BDC_INSERT'
   EXPORTING
     TCODE                  = 'ME51'
    POST_LOCAL             = NOVBLOCAL
    PRINTING               = NOPRINT
    SIMUBATCH              = 'A'
     CTUPARAMS               = PARAMETROS
    TABLES
      dynprotab              = i_bdcdata
EXCEPTIONS
    INTERNAL_ERROR         = 1
    NOT_OPEN               = 2
    QUEUE_ERROR            = 3
    TCODE_INVALID          = 4
    PRINTING_INVALID       = 5
    POSTING_INVALID        = 6
    OTHERS                 = 7
But i can´t see the screens.
Help me, please
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Apr 10, 2008 12:46 PM

hi
    For a BDC upload you need to write a program which created BDC sessions.
<u>Steps</u>:
1. Work out the transaction you would use to create the data manually.
2. Use transaction SHDB to record the creation of one material master data.
    Click the New recording button or the Menu - Recording - Create
3. Save the recording, and then go back a screen
4. Select the recording and <b>click on Edit - Create Program.</b> Give the program a Z name, and select transfer from recording.
5. Edit the program. You will see that all the data you entered is hard-coded into the program.
Execute the program. It will have options to create a batch session or to process directly.
IF THIS FINDS USEFUL PLEASE REWARD POINTS
REGARDS
ANOOP

Batch input problem in SM35

Dear all,
I am uploading the bank statements using manual bank statements through Z transaction, Once uploaded system is generating the batch input session for the same.
When i run the batch input session system not clearing outgoing payment automatically based on the assignment field, as i have alreday mentioned the same assignment while posting the document and in the excel file.
I am getting the following message while running the batch input session.
No batch input data for screen SAPDF05X 3100
Message no. 00344
Diagnosis
The transaction sent a screen that was not expected in the batch input session and which therefore could not be supplied with data.
Possible reasons:
1. The batch input session was created incorrectly. The sequence of screens was recordly incorrectly.
2. The transaction behaves differently in background processing in a batch work process than when running in dialog (SY-BATCH is queried and changes the screen sequence).
3. The transaction has undergone user-specific Customizing and therefore certain screens may be skipped or processed differently, according to the current user. If the person who created a batch input session is not the same as the person now processing it, this problem may occur frequently.
System Response
None.
Procedure
For 1: Either re-create the session or process it in expert mode. Correct the batch input program.
For 2. It is very difficult to analyze this problem, particularly in the case that the screen sequence or the display-only options of fields differ according to whether the transaction is being processed in the background or as an online dialog. It could also be that this kind of transaction cannot run with batch input.
For 3: Have the creator of the session process it. If no error occurs now, then this is a program with user-specific Customizing.
Please let me know solution for the same.
Regards,
Anand

Hi,
This may not be a solution but may help you to isolate the problem
a) Are you able to load the bank statement for other banks without error ?
b) Try for the same bank in a different system .
c) If it is working for different bank then check the file format is the same for both the banks.
d) If it is working in different system check the ABAP code for any changes between the system,
e) Are you getting this message for all the line items or only for some line items ?
Regards
K.R

LSMW- Batch Input session getting error

Hi All,
I created LSMW object for Tcode KO01 and its creating the Internal order as expceted.But even after creating the document the Batch Input session status is showing incorrect.No messages are also displayed in the log.
Please let me know why this is happening.
Thanks in Advance,
Savitha

Hi,
Detail Error Message is as follows:
No batch input data for screen SAPLIMR0 1110
Message no. 00344
Diagnosis
The transaction sent a screen that was not expected in the batch input session and which therefore could not be supplied with data.
Possible reasons:
1. The batch input session was created incorrectly. The sequence of screens was recordly incorrectly.
2. The transaction behaves differently in background processing in a batch work process than when running in dialog (SY-BATCH is queried and changes the screen sequence).
3. The transaction has undergone user-specific Customizing and therefore certain screens may be skipped or processed differently, according to the current user. If the person who created a batch input session is not the same as the person now processing it, this problem may occur frequently.
System Response
None.
Procedure
For 1: Either re-create the session or process it in expert mode. Correct the batch input program.
For 2. It is very difficult to analyze this problem, particularly in the case that the screen sequence or the display-only options of fields differ according to whether the transaction is being processed in the background or as an online dialog. It could also be that this kind of transaction cannot run with batch input.
For 3: Have the creator of the session process it. If no error occurs now, then this is a program with user-specific Customizing.
Regards,
ababfk

Forcing a non batch-input mode

Similar Messages

Maybe you are looking for