LSMW- Batch Input session getting error

Hi All,
I created LSMW object for Tcode KO01 and its creating the Internal order as expceted.But even after creating the document the Batch Input session status is showing incorrect.No messages are also displayed in the log.
Please let me know why this is happening.
Thanks in Advance,
Savitha

Hi,
Detail Error Message is as follows:
No batch input data for screen SAPLIMR0 1110
Message no. 00344
Diagnosis
The transaction sent a screen that was not expected in the batch input session and which therefore could not be supplied with data.
Possible reasons:
1. The batch input session was created incorrectly. The sequence of screens was recordly incorrectly.
2. The transaction behaves differently in background processing in a batch work process than when running in dialog (SY-BATCH is queried and changes the screen sequence).
3. The transaction has undergone user-specific Customizing and therefore certain screens may be skipped or processed differently, according to the current user. If the person who created a batch input session is not the same as the person now processing it, this problem may occur frequently.
System Response
None.
Procedure
For 1: Either re-create the session or process it in expert mode. Correct the batch input program.
For 2. It is very difficult to analyze this problem, particularly in the case that the screen sequence or the display-only options of fields differ according to whether the transaction is being processed in the background or as an online dialog. It could also be that this kind of transaction cannot run with batch input.
For 3: Have the creator of the session process it. If no error occurs now, then this is a program with user-specific Customizing.
Regards,
ababfk

Similar Messages

Batch Input Session for Errors

Hello
I'm running a Batch Input (in a FM) and I want to create a session for records with errors. In case of error (output parameter of the FM subrc NE 0) I send it to that session for later running.
Can you explain how do I do this? Thanks!

hi,
Look at the sample program
REPORT Z_BDC_CUSTOMER_R07
       NO STANDARD PAGE HEADING LINE-SIZE 255.
INCLUDE Z_CUSTOMER_BDC_R02.
*-----AT SELECTION-SCREEN
AT SELECTION-SCREEN.
IF SY-UCOMM = 'ONLI'.
*-----group and user must be filled to create a session
    IF SESSION = 'X' AND
       GROUP = SPACE OR USER = SPACE.
      MESSAGE E613(MS).
    ENDIF.
*----Presentation File name should be entered
    IF SESSION = 'X' AND RB_PRE = 'X'
                     AND P_FILE = '' .
      MESSAGE E004(ZROJA).
    ELSEIF CTU = 'X' AND RB_PRE = 'X'
                     AND P_FILE = '' .
      MESSAGE E004(ZROJA).
    ENDIF.
*----Application File name should be entered
    IF SESSION = 'X' AND RB_APP   = 'X'
                     AND P_FILE_A = '' .
      MESSAGE E004(ZROJA).
    ELSEIF CTU = 'X' AND RB_APP = 'X'
               AND P_FILE_A = '' .
      MESSAGE E004(ZROJA).
    ENDIF.
ENDIF.
*-----AT SELECTION-SCREEN OUTPUT
AT SELECTION-SCREEN OUTPUT.
*----When file from Presentation server is selected
IF RB_PRE = 'X'.
*----To make the application server inactive
    LOOP AT SCREEN.
      IF SCREEN-GROUP1 = 'AAA'.
        SCREEN-ACTIVE = 0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ELSE.
*----When file from Presentation server is selected
    RB_APP = 'X'.
*----To make the application server inactive
    LOOP AT SCREEN.
      IF SCREEN-GROUP1 = 'BBB'.
        SCREEN-ACTIVE = 0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
*-----AT SELECTION-SCREEN ON VALUE-REQUEST
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE_A.
CALL FUNCTION 'F4_DXFILENAME_TOPRECURSION'
    EXPORTING
      I_LOCATION_FLAG = 'A'
      I_SERVER        = ' '
      FILEOPERATION   = 'R'
    IMPORTING
      O_PATH          = P_FILE_A
    EXCEPTIONS
      RFC_ERROR       = 1
      ERROR_WITH_GUI = 2
      OTHERS          = 3.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*-----AT SELECTION-SCREEN ON VALUE-REQUEST
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
*-----Function module for value-request
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      PROGRAM_NAME = SYST-CPROG
      DYNPRO_NUMBER = SYST-DYNNR
      FIELD_NAME    = ' '
    IMPORTING
      FILE_NAME     = V_FILE_NAME.
*----Assigning the flatfile to parameter
P_FILE        = V_FILE_NAME.
*-----START-OF-SELECTION
START-OF-SELECTION.
DATA: FILENAME TYPE STRING.
*----When file from Presentation Server is selected
IF RB_PRE = 'X'.
    FILENAME = P_FILE.
*-----Function module to upload data from the presentation server
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        FILENAME                = FILENAME
        FILETYPE                = 'ASC'
        HAS_FIELD_SEPARATOR     = 'X'
      TABLES
        DATA_TAB                = IT_KNA1
      EXCEPTIONS
        FILE_OPEN_ERROR         = 1
        FILE_READ_ERROR         = 2
        NO_BATCH                = 3
        GUI_REFUSE_FILETRANSFER = 4
        INVALID_TYPE            = 5
        NO_AUTHORITY            = 6
        UNKNOWN_ERROR           = 7
        BAD_DATA_FORMAT         = 8
        HEADER_NOT_ALLOWED      = 9
        SEPARATOR_NOT_ALLOWED   = 10
        HEADER_TOO_LONG         = 11
        UNKNOWN_DP_ERROR        = 12
        ACCESS_DENIED           = 13
        DP_OUT_OF_MEMORY        = 14
        DISK_FULL               = 15
        DP_TIMEOUT              = 16
        OTHERS                  = 17.
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ELSE.
*----Upload the File from Application Server
    OPEN DATASET P_FILE_A FOR INPUT IN TEXT MODE ENCODING DEFAULT.
*-----to display an error if the file is not in application server
    IF SY-SUBRC NE 0.
      MESSAGE E006(ZROJA).
    ELSE.
      DO.
        READ DATASET P_FILE_A INTO X_KNA1.
        IF SY-SUBRC EQ 0.
          APPEND X_KNA1 TO IT_KNA1.
        ELSE.
          EXIT.
        ENDIF.
      ENDDO.
    ENDIF.
    CLOSE DATASET P_FILE_A.
ENDIF.
*-----To open a batchinput session
IF SESSION = 'X'.
    CALL FUNCTION 'BDC_OPEN_GROUP'
      EXPORTING
        CLIENT              = SY-MANDT
        GROUP               = GROUP
        KEEP                = KEEP
        USER                = USER
        PROG                = SY-CPROG
      EXCEPTIONS
        CLIENT_INVALID      = 1
        DESTINATION_INVALID = 2
        GROUP_INVALID       = 3
        GROUP_IS_LOCKED     = 4
        INTERNAL_ERROR      = 6
        QUEUE_ERROR         = 7
        RUNNING             = 8
        SYSTEM_LOCK_ERROR   = 9
        USER_INVALID        = 10
        OTHERS              = 11.
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDIF.
*-----Filling the BDCDATA using the Internal Table
LOOP AT IT_KNA1 INTO X_KNA1.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0100'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'RF02D-KTOKD'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_FIELD       USING 'RF02D-KUNNR'
                                  X_KNA1-KUNNR.
    PERFORM BDC_FIELD       USING 'RF02D-KTOKD'
                                  X_KNA1-KTOKD.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0110'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'KNA1-SPRAS'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_FIELD       USING 'KNA1-NAME1'
                                  X_KNA1-NAME1.
    PERFORM BDC_FIELD       USING 'KNA1-SORTL'
                                  X_KNA1-SORTL.
    PERFORM BDC_FIELD       USING 'KNA1-ORT01'
                                  X_KNA1-ORT01.
    PERFORM BDC_FIELD       USING 'KNA1-PSTLZ'
                                  X_KNA1-PSTLZ.
    PERFORM BDC_FIELD       USING 'KNA1-LAND1'
                                  X_KNA1-LAND1.
    PERFORM BDC_FIELD       USING 'KNA1-SPRAS'
                                  X_KNA1-SPRAS.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0120'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'KNA1-LZONE'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_FIELD       USING 'KNA1-LZONE'
                                  X_KNA1-LZONE.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0125'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'KNA1-NIELS'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0130'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'KNBK-BANKS(01)'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=ENTR'.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0340'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'RF02D-KUNNR'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=ENTR'.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0370'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'RF02D-KUNNR'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=ENTR'.
    PERFORM BDC_FIELD       USING 'KNA1-CIVVE'
                                  'X'.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0360'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'KNVK-NAMEV(01)'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=ENTR'.
*----If Session is selected
    IF SESSION = 'X'.
*----To insert data into batch input session
      CALL FUNCTION 'BDC_INSERT'
        EXPORTING
          TCODE     = 'XD01'
        TABLES
          DYNPROTAB = IT_BDCDATA.
      REFRESH IT_BDCDATA.
      AT LAST.
        SKIP.
        WRITE:/ TEXT-001.
      ENDAT.
    ELSE.
*----Calling the transaction
      CALL TRANSACTION 'XD01' USING IT_BDCDATA
                              MODE     CTUMODE
                              UPDATE   CUPDATE
                            MESSAGES INTO IT_BDCMSGCOLL.
      CLEAR IT_BDCDATA.
      REFRESH IT_BDCDATA.
    ENDIF.
ENDLOOP.
*----If Session is Selected
IF SESSION = 'X'.
*----To close the session
    CALL FUNCTION 'BDC_CLOSE_GROUP'
      EXCEPTIONS
        NOT_OPEN    = 1
        QUEUE_ERROR = 2
        OTHERS      = 3.
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDIF.
*-----END-OF-SELECTION
END-OF-SELECTION.
*----To display the success messages
LOOP AT IT_BDCMSGCOLL INTO X_BDCMSGCOLL WHERE MSGTYP = 'S' .
*-----If Message Type Differs
    ON CHANGE OF X_BDCMSGCOLL-MSGTYP.
      WRITE:/ TEXT-002.
      SKIP.
      ULINE (58).
      WRITE:/01 SY-VLINE,02 TEXT-003,
             14 SY-VLINE,15 TEXT-004,
             21 SY-VLINE,22 TEXT-005,
             35 SY-VLINE,36 TEXT-006,
             58 SY-VLINE,/01 SY-ULINE(58).
    ENDON.
    WRITE:/01 SY-VLINE,02 X_BDCMSGCOLL-MSGTYP,
           14 SY-VLINE,15 X_BDCMSGCOLL-TCODE,
           21 SY-VLINE,22 X_BDCMSGCOLL-MSGV1,
           35 SY-VLINE,36 TEXT-007,
           58 SY-VLINE,/01 SY-ULINE(58).
ENDLOOP.
SKIP 2.
*----To display the error messages
LOOP AT IT_BDCMSGCOLL INTO X_BDCMSGCOLL WHERE MSGTYP = 'E'.
*-----If Message Type Differs
    ON CHANGE OF X_BDCMSGCOLL-MSGTYP.
      WRITE:/ TEXT-008.
      SKIP.
      ULINE (58).
      WRITE:/01 SY-VLINE,02 TEXT-003,
             14 SY-VLINE,15 TEXT-004,
             21 SY-VLINE,22 TEXT-005,
             35 SY-VLINE,36 TEXT-006,
             58 SY-VLINE,/01 SY-ULINE(58).
    ENDON.
    WRITE:/01 SY-VLINE,02 X_BDCMSGCOLL-MSGTYP,
           14 SY-VLINE,15 X_BDCMSGCOLL-TCODE,
           21 SY-VLINE,22 X_BDCMSGCOLL-MSGV1,
           35 SY-VLINE,36 'Customer Already Exits',
           58 SY-VLINE,/01 SY-ULINE(58).
ENDLOOP.
*-----FORM fill_bdcdata
FORM FILL_BDCDATA USING L_DYNPRO TYPE ANY
                        L_FNAME TYPE ANY
                        L_FVALUE TYPE ANY.
CLEAR X_BDCDATA.
IF L_DYNPRO = 'X'.
    X_BDCDATA-DYNBEGIN = 'X'.
    X_BDCDATA-PROGRAM = L_FNAME.
    X_BDCDATA-DYNPRO   = L_FVALUE.
ELSE.
    X_BDCDATA-FNAM = L_FNAME.
    X_BDCDATA-FVAL = L_FVALUE.
ENDIF.
APPEND X_BDCDATA TO IT_BDCDATA.
ENDFORM.                    "BDC_FIELD
*-----Start new screen
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROGRAM.
IT_BDCDATA-DYNPRO   = DYNPRO.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
ENDFORM.                    "BDC_DYNPRO
*-----Insert field
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> SPACE.
    CLEAR IT_BDCDATA.
    IT_BDCDATA-FNAM = FNAM.
    IT_BDCDATA-FVAL = FVAL.
    APPEND IT_BDCDATA.
ENDIF.
ENDFORM.                    "BDC_FIELD

Batch Input Session - Display Error Only - SM35

Dear all,
Need to do material master extension in MM01 and considering batch input session using mode 'display error' only.
However,do have a concern on its performance or run time. In SM35, running in display error only mode - will there be any time out error like the ones encounter in abap reporting ?
This is because, we will be dealing with a huge volume of data (round 2,000). Therefore would like to know, if there would be any possibility that the bdc session in sm35 will experience a time out or not .
Appreciate it if you could shed some lights on this. Thanks in advance.

Hello there,
Executing MM01's batch job in background wasn't really an option. This is because, this error was encountered "Control Framework: Fatal error - GUI cannot be reached".
Had done a search on this -- and it indicates that in background mode there isn't GUI involved. Searched result also shows that this error appears when its comes to screens with text ie. Purchase Text or Sales text. Nope, no BDC on entering text involved.
http://www.sapfans.com/forums/viewtopic.php?f=13&t=164902&hilit=ControlFramework%3AFatalerrorGUIcannotbe+reached
Therefore the option am considering is executing the batch job in "Display Error Only". Nonetheless, am not too sure if this will cause time out. The other reason as to this option is that -- we initially introduced CALL TRANSACTION for extending material in MM01. However, functional feedback that it was slow.
Kindly advise - thanks in advance.

Idoc ACC_GL_POSTING in batch input mode gets error

hi,
In ACC_GL_POSTING, msg type ACC_GL_POSTING01 with process code 'BAPI' it is working fine for me if i run normally.
whereas in transaction 'OBA7' for document type 'SA' if I set batch input only enabled i get error message 'Document type SA is only defined for batch input'. what is problem and how to solve it.
thanks in advance.

Team
I have been ckecking the problem and the problem is not FF68; it has more focuses with BSEG-ZFBDT and use of SGL indicators, and according the explanation below described I have decided to take other approach to resolve the problem.
"Please note that the due date field is as per standard design as per the SAP note 95079.
Field BSEG-ZFBDT is hardcoded in most FI screens to be mandatory and cannot be influenced by any field status changes. This situation only valid when posting with special G/L indicator (downpayment).
The reason behind this is that this special GL screen and the data entered here are very important to many other programs. This data affects liabilities and receivables where due date is necessary almost everytime."
I want to say many thanks to try to help me.
Ismael

LSMW Batch input session issue

We have LSMW project for changing material BOM, object 0030, method 0002 and program RCSBI020 type B. I am passing header and items file. All the steps works until session creation. At session creation step it is just displaying the list of material and doesn't show any session generated.
In what scenarios usually LSMW doesn't create the sessions? Any help would be appericiated.

It seems that LSMW always use B (Batch Input). Try running the program RCSBI020 directly, I think you have the option not to create BI (the "Create folder" checkbox must not be selected).
Thanks & regards,
Hadiman

Getting error while uploading gl master data using LSMW batch input data

Hi Experts,
I am getting error while uploading the GL master data through lsmw using batch input recording.
After completion of all steps at the time of running batch input session error i am getting is "maintain EN language discription"
and Pls tell me is it possible to upload transactional data using lsmw? if yes pls explaing briefly.

Hello,
Kindly post in the FI forum to get a better response.
Regarding the issue you might check whether the correct column is being picked up where you have maintained the description.
Kind Regards // Shaubhik

LSMW - Error in Inventory - Create batch input session

Hello good day.
I'm trying to create a batch input session for inventory upload (Standard Batch Input program - RM07MMBL) and when I select the Name of logical file = "MM_INVENTORY_MANAGEMENT_GOODS_MOVEMENT" and press F8, the following error occurs:
<b>Sequential file mmgoods cannot be opened
Message no. M7 850</b>
Now as the legend says.... I've contacted my system administrator and he keeps telling me everything is ok, but the error keeps appearing, where can I see if I have authorization for this "file" ???
Where is it created ??
I need more info on this.
Your help is very much appreciated.
Thank you.
Juan

go to file transaction n check for the logical file path and logical file weather it is defined correctly r not?
if it is correctly defined check for the file, weather the flat file is defined at the correct location which is defined in the logical file path
u can refer the below link also
Re: Logical file
Regards,
Naveen

LSMW Issue at step -Run Batch Input Session

Dear gurus,
While uploading service master through lSMW while processing the system prompts a message specifying "Buffertable not upto date" at Run Batch Input Session step .So please investigate what is missing/wrong.
Wirth regards,
Raj

I dont think that this has directly something to do with LSMW.
It is more related to the transaction your try to post in the batch input.
Search OSS with the error message number. I had seen some notes for number SE001, but your message is actually twice in the message table, and you did not tell the message number.
If it is message SE001, then you may find programm corrections in OSS.
Otherwise just log out and in again and try, or open a message at OSS yourself if the problem still persists

Batch Input Session for RFUMSV50 is not getting processed.

Dear All,
When i am trying to transfer the Service Tax Inetrim account to Service tax final account with the help of the program RFUMSV50 the batch input session is getting generated without any error. But when i process the same in SM35 it is not getitng processed.
Please advice on this.
Regards,
Rajeswari Shankar.

Hello Rajeswari,
Yes, this is normal.
When batch input sessions is generated with any error, this does not mean that you can execute it after via SM35 without any error
Moreover, you have the option in SM35 to execute it and with option "display error only", so this means that it can happen that there is no error
For example, the profit center is mandatory, and it is missing in the document. In that case the system will display error and ask you to fulfill the profit center
Please tell me, which error you have (message number)
Thanks
Tarek

LSMW for Chart of Account: Field XSPEB not filled in batch-input session

Hi all,
we are using LSMW for importing the chart of account into a new system.
The LSMW project uses the report RFBISA00 for the creation of the batch-input session.
Some accounts need to be blocked in the new system. Therefore, we have the field XSPEB in our source structure and of course also in our target structure. But after the creation of the batch-input session the field is not included in the corresponding batch-input session.
Does anybody know why it is not set? I already debugged the program RFBISA00 but couldn't find the place where the data get lost.
Thanks in advance and regards,
Martin

Did your batch input end with save ( /11 ) or what ok_code are you using ?

Error while Running BRS Batch input session

Dear Gurus,
When i am running Batch input session after BRS statement posted, system giving Error message:
<b>No batch input data for screen SAPDF05X 3100</b>
Entered, saved and posted the statement. after that while processing session getting error like this........How to overcome.
Can we post statement directly without creating session.
Regards,
Venkat

Hi,
The ABAP Counterpart has to build an exception handling for this particular message.
Normally these messages occur either after an upgrade or after a change in the account(different filed status)
Provide points if usefull.
Thanks,
Praveen

PIR - LSWM Error in create batch input session

Hi
i made a conversion program Purchasing info record through Standard object / Direct Input in that Step 13 : Create Batch input session when i execute the Batch Input session i am getting the following error message
Transaction 00000001 : no transaction code transfered.
Please help me to solve this issue
Thanks & Regards,
mani.

Hi
Everything is working perfectly till STEP 10 : " Display Read Data"
once if i convert it it was not populating the correct one. i cant find the T.Code ,Material Number & Indictor for Purchasing Info record.
Please help me to solve thi s issue
Thanks & Regards,
Mani.

Revaluation error"posting are in batch input session"

HI All,
we are using 6.0 version and user has executed revaluation for FEB month,they were practised to use the online postings, but when they excute the revaluation there was an error message for 3 accts " valauation kept in batch input session "and accounts determination is missing for these accounts" and when we check the batch input session using SM35 there is no session with error. How to work on this ?
Is there any particular transaction where we can check the batch input session and execute once the accounts are assigned ?
Plz advice us, and is necessary for closing the month end activity.
best Regards
Stephen

Execute the session either online or in display error mode. This will give you the exact point of error and also you will be able to get detailed error message.
Regards
Rakesh Pawaskar

RFUMSV50- Error during batch input session

Hello Experts,
I am getting an error after creation of batch input session for program RFUMSV50.
If I run the session in foreground it gives velow error
program successfully worked 3 months back without any error but after that I am facing this type of issues.
Can anyone please guide what exactly missing in the configuration.
Regards,
ps

Hi Salvatore,
I'm in the same situation. I execute a BI, but it stops after a waring appears.
If I proceed the transaction manually, the warning appears, but if I press ENTER the transaction ends successful.
Did you solved your Problem or did you have an hint for me.
Kind regards
Yvonne Adler

LSMW Routing Standard Batch Input Create Batch Input Session

Hello All,
I am using LSMW for routing upload, using standard batch input method. Program RCPTRA01.
I am facing this quite peculiar problem.
I have tried first with separate text file for every source structure. Everything works fine till convert data step.
But when I go for 'Create Batch Input Session' it creates session for tables MAPL, PLKO, PLPO, PLMZ, PLMK. Other tables remain balnk (EAPL, PLFL, PLAB, PLFH, PLPH, PLFT, PLFV, PLWP). Because of this while running the session only the header and material assignment to task list get uploaded. Rest data, operation, MIC, component allocation do not get uploaded.
I have also tried for one text file for multiple structure. In that I face porblem for BDC creation. While debugging I faced th same thing in this also.
Could anyone please explain me the soution for this? Do I need to amend any progrm fior this?
Expecting lightning fast replies from Gurus....
Mimiri

Hello All,
I am awaiting your reply on this.......
Mimiri

LSMW- Batch Input session getting error

Similar Messages

Maybe you are looking for