Forcing a Truncation warning in string to be error
Hi,
If let say my source table has column with varchar(20) and my destination table has a column of varchar(5), I want SSIS to force to an error because of the truncation detected. Is it possible?
Currently, warning is shown at design time that there is truncation but when package is run, the truncated data still gets inserted to destination.
cherriesh
If the value exceeds the allowed length it will fail.
There is nothing like a C++ compiler flag in SSIS that would treat warnings as errors. Yet, it will never run under the circumstances you are asking for, it merely does not make sense.
Arthur My Blog
Similar Messages
-
Is there a way to force the cursor into a string control when a vi is called
In a .vi I'm wrighting I need to input a new serail number at the beginning of each run. Is there a way to force the cursor into the string control box every time the start screen returns? eliminating the need for the operator to move the mouse around and click.
I would like to THANK all that have replied to my questions in the past. It has been a big help!
Thanks
TeBluesah, problem solved. what a community.
Message Edited by Space_Flight on 11-20-2006 10:08 AM
Attachments:
keyfocus.jpg 83 KB -
Hi,
I've configured ogg between primary & DR server. I'm continuously getting the following error in my primary server for DP process & sometimes for EXTRACT process after which process goes in abended state.
WARNING OGG-01223 TCP/IP error 111 (Connection refused).
After starting the process manually, it comes in Running state. But this is frequent issue I'm facing for OGG configuration at my end.
Please find the parameter details & report log details as follows:
Primary Server Parameters:
GGSCI (sevadm) 40> view params dpatm
extract dpatm
userid ggs_owner,password ggs_owner
discardfile /home/oracle/ogg/dirdat/discard/dpatm_discard.txt,append,megabytes 1
0
rmthost 10.10.250.198 ,mgrport 7809,tcpbufsize 100000
rmttrail /home/oracle/ogg/dirdat/rt
passthru
sequence atmswitch.*;
table atmswitch.*;
GGSCI (sevadm) 51> view params mgr
port 7809
dynamicportlist 7810-7830,7833,7835
DYNAMICPORTREASSIGNDELAY 5
--autorestart extract extatm,retries 500,waitminutes 1,resetminutes 600
--autorestart extract extcbs,retries 500,waitminutes 1,resetminutes 600
--autorestart extract dpatm,retries 500,waitminutes 1,resetminutes 600
--autorestart extract dpcbs,retries 500,waitminutes 1,resetminutes 600
--autorestart replicat drrepatm,retries 500,waitminutes 1,resetminutes 600
--autorestart replicat drrepcbs,retries 500,waitminutes 1,resetminutes 600
--autorestart extract extaml,retries 500,waitminutes 1,resetminutes 600
--autorestart extract extrm,retries 500,waitminutes 1,resetminutes 600
--autorestart extract extinb,retries 500,waitminutes 1,resetminutes 600
--autorestart extract dpaml,retries 500,waitminutes 1,resetminutes 600
--autorestart extract dprm,retries 500,waitminutes 1,resetminutes 600
--autorestart extract dpinb,retries 500,waitminutes 1,resetminutes 600
--autorestart replicat drrepaml,retries 500,waitminutes 1,resetminutes 600
--autorestart replicat drreprm,retries 500,waitminutes 1,resetminutes 600
--autorestart replicat drrepinb,retries 500,waitminutes 1,resetminutes 600
userid ggs_owner,password ggs_owner
purgeoldextracts /home/oracle/ogg/dirdat/*,usecheckpoints,minkeepdays 5
GGSCI (sevadm) 52> view params extatm
extract extatm
userid ggs_owner,password ggs_owner
reportcount every 2 hours,rate
report at 01:00
reportrollover at 01:15
tranlogoptions asmuser sys@asm,asmpassword asmdba
grouptransops 2000
discardfile /home/oracle/ogg/dirdat/discard/extatm_discard.txt,append,megabytes
10
discardrollover at 02:00 on sunday
exttrail /home/oracle/ogg/dirdat/lt
ddl include all
ddloptions addtrandata retryop retrydelay 20 maxretries 20,report
sequence atmswitch.*;
table atmswitch.*;
Report log file for DP Process:
GGSCI (sevadm) 39> view report dpatm
Oracle GoldenGate Capture for Oracle
Version 11.2.1.0.1 OGGCORE_11.2.1.0.1_PLATFORMS_120423.0230_FBO
Linux, x64, 64bit (optimized), Oracle 10g on Apr 23 2012 07:44:10
Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
Starting at 2015-03-19 16:54:56
Operating System Version:
Linux
Version #1 SMP Tue Mar 16 21:52:39 EDT 2010, Release 2.6.18-194.el5
Node: sevadm
Machine: x86_64
soft limit hard limit
Address Space Size : unlimited unlimited
Heap Size : unlimited unlimited
File Size : unlimited unlimited
CPU Time : unlimited unlimited
Process id: 13260
Description:
** Running with the following parameters **
2015-03-19 16:54:56 INFO OGG-03035 Operating system character set identifie
d as UTF-8. Locale: en_US, LC_ALL:.
extract dpatm
userid ggs_owner,password *********
2015-03-19 16:54:56 INFO OGG-03500 WARNING: NLS_LANG environment variable d
oes not match database character set, or not set. Using database character set v
alue of WE8ISO8859P1.
discardfile /home/oracle/ogg/dirdat/discard/dpatm_discard.txt,append,megabytes 1
0
rmthost 10.10.250.198 ,mgrport 7809,tcpbufsize 100000
rmttrail /home/oracle/ogg/dirdat/rt
passthru
sequence atmswitch.*;
table atmswitch.*;
2015-03-19 16:54:56 INFO OGG-01815 Virtual Memory Facilities for: COM
anon alloc: mmap(MAP_ANON) anon free: munmap
file alloc: mmap(MAP_SHARED) file free: munmap
target directories:
/home/oracle/ogg/dirtmp.
CACHEMGR virtual memory values (may have been adjusted)
CACHESIZE: 64G
CACHEPAGEOUTSIZE (normal): 8M
PROCESS VM AVAIL FROM OS (min): 128G
CACHESIZEMAX (strict force to disk): 96G
Database Version:
Oracle Database 10g Release 10.2.0.1.0 - 64bit Production
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Database Language and Character Set:
NLS_LANG = ".WE8ISO8859P1"
NLS_LANGUAGE = "AMERICAN"
NLS_TERRITORY = "AMERICA"
NLS_CHARACTERSET = "WE8ISO8859P1"
2015-03-19 16:55:26 WARNING OGG-01223 TCP/IP error 111 (Connection refused).
2015-03-19 16:56:08 WARNING OGG-01223 TCP/IP error 111 (Connection refused).
2015-03-19 16:56:49 WARNING OGG-01223 TCP/IP error 111 (Connection refused).
2015-03-19 16:57:30 WARNING OGG-01223 TCP/IP error 111 (Connection refused).
2015-03-19 16:58:11 WARNING OGG-01223 TCP/IP error 111 (Connection refused).
2015-03-19 16:58:52 WARNING OGG-01223 TCP/IP error 111 (Connection refused).
2015-03-19 16:59:33 WARNING OGG-01223 TCP/IP error 111 (Connection refused).
2015-03-19 17:00:14 WARNING OGG-01223 TCP/IP error 111 (Connection refused).
2015-03-19 17:00:55 WARNING OGG-01223 TCP/IP error 111 (Connection refused).
2015-03-19 17:01:36 WARNING OGG-01223 TCP/IP error 111 (Connection refused).
2015-03-19 17:02:17 WARNING OGG-01223 TCP/IP error 111 (Connection refused).
Source Context :
SourceModule : [er.extrout]
SourceID : [/scratch/aime1/adestore/views/aime1_adc4150256/oggc
ore/OpenSys/src/app/er/extrout.c]
SourceFunction : [tcp_send_data]
SourceLine : [1352]
ThreadBacktrace : [9] elements
: [/home/oracle/ogg/libgglog.so(CMessageContext::AddTh
readContext()+0x1e) [0x2ba1dd1587de]]
: [/home/oracle/ogg/libgglog.so(CMessageFactory::Creat
eMessage(CSourceContext*, unsigned int, ...)+0x2cc) [0x2ba1dd154c7c]]
: [/home/oracle/ogg/libgglog.so(_MSG_ERR_TCP_GENERIC(C
SourceContext*, char const*, CMessageFactory::MessageDisposition)+0x31) [0x2ba1d
d139daf]]
: [/home/oracle/ogg/extract(tcp_send_data(extract_def*
)+0x2b3) [0x5116e1]]
: [/home/oracle/ogg/extract(flush_tcp(extract_def*, in
t)+0x15c) [0x512350]]
: [/home/oracle/ogg/extract(RECOVERY_initialize()+0x37
1) [0x5239a1]]
: [/home/oracle/ogg/extract(main+0x4a5) [0x56b335]]
: [/lib64/libc.so.6(__libc_start_main+0xf4) [0x333621d
994]]
: [/home/oracle/ogg/extract(__gxx_personality_v0+0x382
) [0x4e754a]]
2015-03-19 17:02:58 ERROR OGG-01224 TCP/IP error 111 (Connection refused); r
etries exceeded.
2015-03-19 17:02:58 ERROR OGG-01668 PROCESS ABENDING.
Please guide me on this.
Regards,
Simon P- check your remote host server is up and running.
- check mgr process is up and running on target site.
- try this and see if network connection is OK..
telnet 10.10.250.198 7809
- try to copy a file (scp) from source to target (take a dummy file; size bigger than tcpbufsize)
- check ggserr.log file on target; you might see if there are any issues with server/collector port allocation/timeout.
hope this helps...
Thanks. -
Warning: View altered with compilation errors. : Please help.
Hi All,
Found few views invalid, tried to compile them, but got the following error. It looks like synonyms are calling each other.
Please help to compile the view.
=======================
SQL> alter view APPS.PER_ADDRESSES_AV12 compile;
Warning: View altered with compilation errors.
Checked error:
SQL> SHOW errors VIEW APPS.PER_ADDRESSES_AV12;
Errors for VIEW APPS.PER_ADDRESSES_AV12:
LINE/COL ERROR
0/0 ORA-01775: looping chain of synonyms
Extracted DDL:
==========
CREATE OR REPLACE FORCE VIEW "APPS"."PER_ADDRESSES_AV12" ("ROW_KEY", "ADDRESS_
ID", "TOWN_OR_CITY") AS
SELECT ROW_KEY, ADDRESS_ID, TOWN_OR_CITY FROM PER_ADDRESSES_A WHERE TOWN_OR_CI
TY IS NOT NULL OR SUBSTR(AUDIT_TRUE_NULLS,12,1)='Y' UNION ALL SELECT 99991231235
9591111122222 ROW_KEY, ADDRESS_ID, TOWN_OR_CITY FROM PER_ADDRESSES
Checked synonyms for the base table:
=======================
OWNER SYNONYM_NAME TABLE_OWNER TABLE_NAME
PUBLIC PER_ADDRESSES HR PER_ADDRESSES
APPS PER_ADDRESSES HR PER_ADDRESSES
XXHRC PER_ADDRESSES APPS PER_ADDRESSES
Edited by: 784786 on Dec 22, 2011 7:27 AM784786 wrote:
Found few views invalid, tried to compile them, but got the following error. It looks like synonyms are calling each other.
Please help to compile the view.
SQL> alter view APPS.PER_ADDRESSES_AV12 compile;
Warning: View altered with compilation errors.
SQL> SHOW errors VIEW APPS.PER_ADDRESSES_AV12;
Errors for VIEW APPS.PER_ADDRESSES_AV12:
LINE/COL ERROR
0/0 ORA-01775: looping chain of synonyms
CREATE OR REPLACE FORCE VIEW "APPS"."PER_ADDRESSES_AV12" ("ROW_KEY", "ADDRESS_
ID", "TOWN_OR_CITY") AS
SELECT ROW_KEY, ADDRESS_ID, TOWN_OR_CITY FROM PER_ADDRESSES_A WHERE TOWN_OR_CI
TY IS NOT NULL OR SUBSTR(AUDIT_TRUE_NULLS,12,1)='Y' UNION ALL SELECT 99991231235
9591111122222 ROW_KEY, ADDRESS_ID, TOWN_OR_CITY FROM PER_ADDRESSES
OWNER SYNONYM_NAME TABLE_OWNER TABLE_NAME
PUBLIC PER_ADDRESSES HR PER_ADDRESSES
APPS PER_ADDRESSES HR PER_ADDRESSES
XXHRC PER_ADDRESSES APPS PER_ADDRESSESso break the chain by dropping one or of them -
Warning: Procedure created with compilation errors.
I am trying to upload a pdf file into a blob column of a table. I get this error with these three ways of doing that:Warning: Procedure created with compilation errors.
Any ideas why?
-- THE STORAGE TABLE FOR THE IMAGE FILE
ALTER TABLE PDM
DROP PRIMARY KEY CASCADE;
DROP TABLE PDM CASCADE CONSTRAINTS;
CREATE TABLE PDM (
DNAME VARCHAR2(30), -- DIRECTORY NAME
SNAME VARCHAR2(30), -- SUBDIRECTORY NAME
FNAME VARCHAR2(30), -- FILE NAME
IBLOB BLOB); -- IMAGE FILE
-- CREATE THE PROCEDURE TO LOAD THE FILE
CREATE OR REPLACE PROCEDURE LOAD_FILE (
PDNAME VARCHAR2,
PSNAME VARCHAR2,
PFNAME VARCHAR2) IS
SRC_FILE BFILE;
DST_FILE BLOB;
LGH_FILE BINARY_INTEGER;
BEGIN
SRC_FILE := BFILENAME('PDF_DIR', '266-5210.pdf');
-- INSERT A NULL RECORD TO LOCK
INSERT INTO PDM
(DNAME, SNAME, FNAME, IBLOB)
VALUES
(PDNAME, PSNAME, PFNAME, EMPTY_BLOB())
RETURNING IBLOB INTO DST_FILE;
-- LOCK RECORD
SELECT IBLOB
INTO DST_FILE
FROM PDM
WHERE DNAME = PDNAME
AND SNAME = PSNAME
AND FNAME = PFNAME
FOR UPDATE;
-- OPEN THE FILE
DBMS_LOB.FILEOPEN(SRC_FILE, DBMS_LOB.FILE_READONLY);
DBMS_LOB.OPEN(DST_FILE, DBMS_LOB.LOB_READWRITE);
-- DETERMINE LENGTH
LGH_FILE := DBMS_LOB.GETLENGTH(SRC_FILE);
-- READ THE FILE
DBMS_LOB.LOADFROMFILE(DST_FILE, SRC_FILE, LGH_FILE);
-- UPDATE THE BLOB FIELD
UPDATE PDM
SET IBLOB = DST_FILE
WHERE DNAME = PDNAME
AND SNAME = PSNAME
AND FNAME = PFNAME;
-- CLOSE FILE
DBMS_LOB.FILECLOSE(SRC_FILE);
END LOAD_FILE;
-- THE STORAGE TABLE FOR THE IMAGE FILE
ALTER TABLE PDM
DROP PRIMARY KEY CASCADE;
DROP TABLE PDM CASCADE CONSTRAINTS;
CREATE TABLE PDM
FNAME VARCHAR2(1000)
,IBLOB BLOB
-- CREATE THE PROCEDURE TO LOAD THE FILE
CREATE OR REPLACE PROCEDURE LOAD_FILE AS (
SRC_FILE BFILE := BFILENAME('PDF_DIR', '262-2827.pdf');
DST_FILE BLOB;
BEGIN
-- INSERT A NULL RECORD TO LOCK
INSERT INTO PDM
(FNAME, IBLOB)
VALUES
('262-2827.pdf', EMPTY_BLOB())
RETURNING IBLOB INTO DST_FILE;
-- OPEN THE FILE
DBMS_LOB.FILEOPEN(SRC_FILE, DBMS_LOB.FILE_READONLY);
DBMS_LOB.OPEN(DST_FILE, DBMS_LOB.LOB_READWRITE);
-- READ THE FILE
DBMS_LOB.LOADFROMFILE( SRC_FILE, DST_FILE);
-- UPDATE THE BLOB FIELD
UPDATE PDM
SET FNAME = SRC_FILE,
IBLOB = DST_FILE;
-- CLOSE FILE
DBMS_LOB.CLOSE(DST_FILE);
DBMS_LOB.FILECLOSE(SRC_FILE);
COMMIT;
END LOAD_FILE;
ALTER TABLE IMAGE_TABLE
DROP PRIMARY KEY CASCADE;
DROP TABLE IMAGE_TABLE CASCADE CONSTRAINTS;
CREATE TABLE IMAGE_TABLE (
ID NUMBER PRIMARY KEY,
IMAGE ORDSYS.ORDIMAGE);
CREATE OR REPLACE DIRECTORY IMAGEDIR AS 'C:\cards\';
GRANT READ ON DIRECTORY IMAGEDIR TO PUBLIC;
GRANT READ ON DIRECTORY MY_FILES TO twilliam;
GRANT READ ON DIRECTORY MY_FILES TO tmwillia;
CREATE OR REPLACE PROCEDURE IMAGE_IMPORT(DEST_ID NUMBER,
FILENAME VARCHAR2)
IS
IMG ORDSYS.ORDIMAGE;
CTX RAW(64) := NULL;
BEGIN
DELETE FROM IMAGE_TABLE
WHERE ID = DEST_ID;
INSERT INTO IMAGE_TABLE (ID, IMAGE)
VALUES (DEST_ID, ORDSYS.ORDIMAGE.INIT())
RETURNING IMAGE INTO IMG;
IMG.IMPORTFROM(CTX, 'FILE', 'IMAGEDIR', FILENAME);
UPDATE IMAGE_TABLE SET IMAGE=IMG WHERE ID=DEST_ID;
END
CALL IMAGE_IMPORT(7142,'125-0502.pdf');
CALL IMAGE_IMPORT(7143,'125-0503.pdf');
SELECT ID,
T.IMAGE.GETHEIGHT(),
T.IMAGE.GETWIDTH()
FROM IMAGE_TABLE T;
SELECT ID,
T.IMAGE.GETFILEFORMAT(),
T.IMAGE.GETCOMPRESSIONFORMAT()
FROM IMAGE_TABLE T;
SELECT ID,
T.IMAGE.GETCONTENTFORMAT(),
T.IMAGE.GETCONTENTLENGTH()
FROM IMAGE_TABLE T;In the second load_file procedure you should probably change the update command
-- UPDATE THE BLOB FIELD
UPDATE PDM
SET FNAME = SRC_FILE,
IBLOB = DST_FILE;into this
-- UPDATE THE BLOB FIELD
UPDATE PDM
SET IBLOB = DST_FILE
WHERE FNAME = '262-2827.pdf';but I'm not sure how to explain the eof error message. Usually this happens when you forget an "END;" or "END LOOP;" command.
Ok I rechecked and the declaration of the second procedure seems wrong
-- CREATE THE PROCEDURE TO LOAD THE FILE
CREATE OR REPLACE PROCEDURE LOAD_FILE AS (
SRC_FILE BFILE := BFILENAME('PDF_DIR', '262-2827.pdf');
DST_FILE BLOB;
BEGINshould be rewritten as
-- CREATE THE PROCEDURE TO LOAD THE FILE
CREATE OR REPLACE PROCEDURE LOAD_FILE
AS
SRC_FILE BFILE := BFILENAME('PDF_DIR', '262-2827.pdf');
DST_FILE BLOB;
BEGIN
...I removed one parenthesis which was not closed.
And for the image_import procedure there is a semikolon missing after the final END.
END*;*
Edited by: Sven W. on Nov 24, 2008 5:54 PM.
Edited by: Sven W. on Nov 24, 2008 5:56 PM
Edited by: Sven W. on Nov 24, 2008 5:59 PM -
Warning: Type created with compilation errors. sql : oracle 11gr2
I'm trying to create a supertype customer service and subtype agent and supervisor, so they can inherent values however when I try to run this in oracle sql: a message comes up
Warning: Type created with compilation errors.
What is wrong with the code below?
Create or replace type customer_s_type as object ( csID number, csName varchar(15), csType number ) NOT FINAL; Create or replace type supervisor_type UNDER customer_s_type ( title varchar (10) ); Create or replace type agent_type UNDER customer_s_type (title varchar (10)); Create table supervisor of supervisor_type ( CONSTRAINT supervisor_PK PRIMARY KEY (csID)); Create table agent of agent_type (CONSTRAINT agent_PK PRIMARY KEY (csID)); create table customer_service( csID number(10), csType number(10), constraint supervisor_pk primary key(csID) );Wile creating TYPE you need to terminate with a back slash (/) semi colon does not work.
Try like this
create or replace type customer_s_type as object ( csid number, csname varchar(15), cstype number ) not final
create or replace type supervisor_type under customer_s_type ( title varchar (10) )
create or replace type agent_type under customer_s_type (title varchar (10)) -
Warning: Function created with compilation errors. ???
I created a function with a warning:
Warning: Function created with compilation errors.
I'd like to know more detailed information about this warning, how to find them?
If only with this warning, I don't know how to correct the definition of the function.
BTW, because it is a warning, I just try to run the sql stmt which will call this function:
SQL> select strdiff(ename, 'FOR') from emp;
select strdiff(ename, 'FOR') from emp
ERROR at line 1:
ORA-06575: Package or function STRDIFF is in an invalid state.
/* strdiff is the name of function */
Thanks in advance!Hi,
I think that your posting may be more suited to the PL/SQL forum.
after the function is created with errors you should try the command:
show err
or
show errors
this should at least give you some idea of what is wrong.
regards Michael -
Strange "Scan From String" to Timestamp Error
hi,
i am trying to parse my time-string into a Time Stamp with "Scan From String" but i get some strange Error(1).
The Code:
The Error:
can anyone confirm? do i have an error in my parser-string?
is it possibly related to this Bug
461196
Scan From String VI returns Error 1 with "%t" as the format string input
http://www.ni.com/product-documentation/52151/en/
that should be fixed?
my labview version is
LV 2014 Service Pack 1 -- Version 14.0.1 (32bit)
with the RealTime addon (but the code in question was not run on RT)
thanks for your time.
Solved!
Go to Solution.Why do you have the square brackets around the scan from string format string? They are not there when you generate the timestamp string so it will fail when trying to convert it back as they are expected to be there.
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets -
I've used Project Web App on Sharepoint 2013. After clear job queue about force check-in then I've got this error. This made me can't access some pages in PWA anymore e.g. Project center, Resoure center, PWA setting, etc. Who have ever found this problem,
pls. help.
The pop up error msg. is "Sorry, you don't have access to this page"Hi,
According to your description, after you cleared job queue about force check-in then you can't access some pages in PWA.
Maybe you need to check in the pages which has been checked out.
If you have administrative rights, it is possible to override the check-out via the View All Site Content page:
Site Actions->View All Site Content->Pages->Hover the item you want to check in, and from the context-menu (arrow-down next to the filename), choose "Discard Check Out"
Besides, to troubleshooting the error “Sorry, you don't have access to this page”, refer to the following articles:
http://sharepoint.rackspace.com/sharepoint-2013-troubleshooting-an-access-issue-with-a-custom-master-page
http://technet.microsoft.com/en-us/library/ff758656(v=office.15).aspx
In addition, as this issue is related to project server, I suggest you create a new thread on project server, more experts will assist you:
https://social.technet.microsoft.com/Forums/projectserver/en-US/home?category=project
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support -
Warning: Library created with compilation errors.
I am trying to run the following in SQLPlus logged in as
Portal30_SSO on the portal database server:
create or replace library auth_ext as 'C:\oracle\ora81
\bin\ssoxldap.dll';
commit;
When I run this it gives me the error:
Warning: Library created with compilation errors.
I am following the instructions from "Configuring Oracle9iAS
Portal for LDAP Authentication". I am running Oracle 8.1.7 and
OID on one W2K server and 9iAS on another W2K server. Any
suggestions on how to resolve this problem?Is there any solution about how to compile XDB.DBMS_XDBUTIL_INT package?
My XDB.DBMS_XDBUTIL_INT package gives the following error when compiled:
How can I recreate "XDB.DBMS_XDBUTIL_INT". Currently it does not compile, giving error :
LINE/COL ERROR
33/7 PL/SQL: SQL Statement ignored
34/14 PL/SQL: ORA-00942: table or view does not exist -
Unflatten From String causes runtime error in LV2009
I found this error when trying suggestions made in this thread.
http://forums.ni.com/ni/board/message?board.id=170&thread.id=458335
Unflaten from string causes runtime Error 74 possible reason(s) Memory or data structure corrupt.
Attachments:
Unflatten runtime error.vi 8 KB
error1.jpg 13 KBOf course you are getting the error. The data types are inconsistent. You convert the cluster to an array. You then define the type of flattened string as a cluster. Either don't convert to an array or define the data type as an of paths. Look again at the examples in that post.
-
Hi,
Im getting following ODBC warning while connecting with TT database.
I understood its thrown after SQLDriverConnect() in my application.
This error was noticed after changing my DSN.
[TimesTen][TimesTen 7.0.2.0.0 CLIENT] Data truncated. ODBC Error/Warning = 01004, TimesTen Error/Warning = 0
Both the server dsn connection character set is JA16SJIS .
Connection is done and I could do operations on the DB .
Thanking in advance
sanalHi thanks ,
This is the connection.DLL contains the following method
int getConnection(SQLHENV henv,SQLHDBC hdbc,char * dsn){
SQLRETURN rc = SQL_SUCCESS; //* General return code for the API
SQLHSTMT hstmt = SQL_NULL_HSTMT; //* Statement handle
SQLCHAR connOut[255];// Buffer for completed connection string
SQLSMALLINT connOutLen;//Number of bytes returned in ConnOut
SQLCHAR connStr = (SQLCHAR)dsn;//Connection string
/* FOR LOGGING THE MESSAGE IN THE LOG*/
logMessage('D', __FILE__, "getConnection", __LINE__, "Entering connection"); //logging a 'DEBUG'
rc = SQLAllocEnv(henv);
if (rc != SQL_SUCCESS){
logMessage('E', __FILE__, "getConnection", __LINE__, "Unable to allocate an environment handle!");
exit(1);
logMessage('D', __FILE__, "getConnection", __LINE__, "Allocating Connection Handle"); //logging a 'DEBUG'
rc = SQLAllocConnect(*henv, hdbc);
if (rc != SQL_SUCCESS){
printf("unable to allocate connection handle hdbc");
chkReturnCode(rc, *henv, SQL_NULL_HDBC, SQL_NULL_HSTMT, "Unable to allocate a connection handle\n", __FILE__, __LINE__, 1);
logMessage('D', __FILE__, "getConnection", __LINE__, "Creating the connection"); //logging a 'DEBUG'
rc = SQLDriverConnect(*hdbc, NULL,connStr, SQL_NTS,connOut, sizeof(connOut),&connOutLen,SQL_DRIVER_NOPROMPT);\
chkReturnCode(rc, henv, hdbc, SQL_NULL_HSTMT, "Error in connecting to the data store\n", __FILE__, __LINE__, 1);
return rc; // Connection will be closed in the calling program
Im passing the env and connection handles from my calling program as follows
rc=getConnection(&henv,&hdbc,connStr);
where connStr="DSN=sanal_dsn;PermSize=64"
even if rc =1 ,surprisingly connection is there and i can do operations on DB.
thanks for ur time,
sanal -
Image (Line drawing). Save for Web (*gif). Receive following warning:
"Some names of the files being saved will be truncated to 31 characters for compatibility with Macintosh browsers. To change your filename compatibility options, click the Optimize pop-up menu, choose Output Settings, and select Saving Files."
I could not find the Optimize pop-up menu. Therefore, I did not do this step.
After save, I simply went to the appropriate folder and changed the file name to what I originally wanted (i.e., essentially correcting the truncation).
Big deal or not? Will all be OK?
Thanks in advance. From a novice.
K. Glenn Cole, President
Wilmot Company, Inc.You can probably safely turn off that Macintosh compatibility setting now.
It's a bit tricky to find those settings... Here's how.
First, in the Save For Web dialog, hit the little icon at the upper-right and choose Edit Output Settings.
Then change the selector to Saving Files and look for the settings you want to change as shown here:
I captured the above from PS CS6, but I think they're substantially the same.
-Noel -
Truncate numbers from string field
Afternoon all,
This time I'd like to extract only 2 strings out of a string field. The field is of sales area which contains numbers and letters. For example, Scotland is given a number 01, West midlands is 02, Ireland however is given IR.
however, the field which holds the information is like, 012, where 01 is the area number and 2 is type of area number.
The information which we are interested in is first two strings.
I have tried this in the formula given below but it doesn't work, it states a field is required
If hasvalue({?Sales Area}) then
totext(Minimum({slslsp.slr_slsperson}[1 to 2])) + " - " +
totext(Maximum({slslsp.slr_slsperson}[1 to 2]))
else
"n/a"
Should I be using a truncate and if yes then how?
P.S. This is to show only the sales area number or text if selected under a parameter. The values of the parameter will stay the same. In other words it is just to show in the report.
Many thanks once again
Regards
JehanzebIs it a range parameter? If so try this
If hasvalue({?Sales Area}) then
totext(Minimum({slslsp.slr_slsperson})[1 to 2]) + " - " +
totext(Maximum({slslsp.slr_slsperson})[1 to 2])
else
"n/a"
regards,
Raghavendra.G
Edited by: Raghavendra Gadhamsetty on Jan 16, 2009 4:16 PM -
I force quit pages and now I get an error saying it "can't be opened"
My computer was acting up, do I saved the document I was working on and restarted. Once I restarted I went to reopen the document and I got an error stating it "can't be opened". So I tried to restart again, saying that pages wasn't quitting and I had to force quit before I could restart (even though pages wasn't opening). So I did the force quit and it's still not opening, I'm getting the same error message and I really need to get into this document and finish it before a deadline. HELP PLEASE.
Try opening it with the shift key held down.
Peter
Maybe you are looking for
-
Hi there everyone. I just lost all of my iTunes Music Store downloads (back-up hard drive failure and was in the middle of a format on my MacBook Pro)... so I don't have any of my .m4p and .m4v files that I've downloaded over the past 2 years from th
-
Why can't I buy songs from Blutengel in Belgium?
Some weeks ago, I could buy songs from them and now not anymore? What's going on in Belgium? Grtz, Zamba
-
Hello there, we got a problem with our Linksys switch. What happened was, we wanted to restore a config from another switch (same) so we backed up the config and loaded it onto this current "dead" one. All we thought was going fine until the switch n
-
Dear all, I want to establish a connectivity of the IP21 server with the xMII server. For this I have used a IP21 connector. I was getting an error related to Easysoft services. To resolve this I downloaded the easysoft JDBC-ODBC connector from the e
-
HELP