Form data entry - tab vertically

the form im manipulating is currently tabbing horizontally - how can this be changed? to tab down the page

Hi
Thanks for the replies
I just realized that data entry on a numeric indicator doesn't really make sense. But my question is, how do I go about setting data range for a numeric indicator? Based on this tutorial : http://www.ni.com/pdf/manuals/320998a.pdf (Page 128/250) in the older versions there seems to be a data range tab or option when you write click the indicator. In my case, the range is greyed out and I tried to play with it with no avail.
Thanks very much

Similar Messages

Data Entry Tab for Numeric Indicator does not Exist

Hi
I'm trying to set the data range for numeric indicators on LabVIEW 10.0.1. For some reason when I go to properties of my numeric indicator, there is no Data Entry Tab as explained on the NI website: http://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/changing_data_ranges_of_nu/. Also, in the data type tab, there is a section for range but everything is grayed out. Any help is appreciated. Thanks
Solved!
Go to Solution.
Attachments:
Question.png ‏159 KB

Hi
Thanks for the replies
I just realized that data entry on a numeric indicator doesn't really make sense. But my question is, how do I go about setting data range for a numeric indicator? Based on this tutorial : http://www.ni.com/pdf/manuals/320998a.pdf (Page 128/250) in the older versions there seems to be a data range tab or option when you write click the indicator. In my case, the range is greyed out and I tried to play with it with no avail.
Thanks very much

Bug report: Controls in the Data Entry property page reset when using relative time

Create a blank VI.
Drop a numeric control.
Right click and select "Display Format".
Change to a relative time.
Switch to the "Data Entry" tab page.
Uncheck the "Use Default Limits" boolean.
Try changing the values and you will see that they return to their previous values (inf, by default). This persists even after pressing OK and opening the dialog again. It looks like the values are held in a cache and put back into the controls, since if you change a page and go back to the limits page, it shows the correct values. I also managed to get it to display the values using the correct format (relative time), which I assume is what it should be doing.
This is in LabVIEW 8.6.
Try to take over the world!
Attachments:
Relative Time Data Entry Bug.vi ‏5 KB

I spent some time playing around with this in 8.6.1, and at this time do not consider it a bug - unless there is something I completely missed.
When you set to relative time, the inputs for data entry are expecting HH:MM or HH:MMS, depending on which display setting you chose. Typing a '7' is undefined - does the user mean hours? Minutes? Seconds? Parsecs ?
Once we type in a value that matches the format and we get the display to change, it is true that from now on if we type '7' in the field, it will automatically coerce it to 7:00, if we type 36 it coerces to 36:00. If we type 7.5, it does not change the value at all. I think at this point, the user knows what is going on, so this behavior is acceptable. After accepting the changes and re-opening the properties window, the limits are persistent.
I was not able to reproduce typing a '7' in the limit, having it automatically coerce back to '-inf', then going to a different tab or clicking ok, and coming back and seeing it as 7:00. It was still '-inf'. If you have some more details on this, maybe I can reproduce it, but from everything I tried, users are be able to enter values and these values are saved.
Edit - I am aware of the other forum post and the CAR filed there...
Message Edited by Robbob on 03-03-2009 11:20 AM
Rob K
Measurements Mechanical Engineer (C-Series, USB X-Series)
National Instruments
CompactRIO Developers Guide
CompactRIO Out of the Box Video
Attachments:
2009-03-03_105522.jpg ‏51 KB
2009-03-03_105336.jpg ‏58 KB

Data entry layout

Hello all
I have created a form (data entry layout) in BCS.
I want to change the order of the objects in the rows (etc. i want "item" to come before "company").
How can i do it?
Best
Yuval

Hi
Thanks for your answer. Unfortunately, I haven't found SAP notes for this problem.
Kind regards,
Jürgen

How do I clear old form data?

When you're filling in forms, as you enter the first letter, all options beginning with that letter appear - allowing you to select one rather than type in an entry.
Some of those drop down suggestions can get pretty long. How do you remove entries - or clear them?

From : http://kevmarl.com/2008/10/20/how-to-delete-a-single-saved-form-data-entry-in-mozilla-firefox
Click on the test entry box form where your data is.
Press down till you get to the incorrect/old/unwanted entries.
Press shift+del.
Repeat for all others.
Viola!

Data entry form problem - form in query-only mode

Hi there,
I am trying to create an data entry form to insert recordacross 2 out of 3 tables. The last of the four tables already have details and does not need to have record inserted into.
This is the scenario, my four tables are Factory, Employee, Works_in. Works_in resolves a many to many relationship between Factory and Employee
Now for a person to be employed in a factory, he must be assigned to a factory.
I have a list of factories already in the database. After choosing a factory from the database, I want to insert records to do with his Fname, Lname, Hiredate bla, bla, bla to the Employee table.
I have a single form with Factory as the master, and 2 tabs each for Employee and Works_in.
After linking all my tables with the ability to choose a factory first on the master form from a combo box and after inserting records into the other forms, it says form running in query-only mode.
What do you think?
Many thanks in advance.
Cube60

I think that's too much of the wrong information.
It sounds like you have multiple forms. Are they Modal or Non-Modal?
What code do you use to call the form that's not working?
Does it work initially and then stop working?
James.

What else must I do to force data entry other than making the field required in LC 9 Forms Designer?

I am trying to make sure that fields are populated with data prior to moving to the next field, but it seems that simply making the field required is not sufficient. What else must I do to enforce data entry within required fileds?
Thank you,

There are a variety of scripting techniques that can be used based upon the form requirements, UI aesthetics, designer preference,... The script below forces data entry into a text field object called 'tf1' but it is a dangerous practice and should be used carefully. You may find yourself in a infinite loop based upon the tab order. A safer pattern includes global field validation upon submit.
// form1.page1.subform1.tf1::exit - (JavaScript, client)
if (this.isNull) {
xfa.host.messageBox("tf1 is a mandatory field.","Text Field 1 Error",0);
xfa.host.setFocus("form1.page1.subform1.tf1");
Steve

Creating data entry forms in numbers

How do I create a data entry form in Numbers for Macbook Air?

Hi Francie,
Ever since I switched to the Mac over a decade ago, I've been puzzled by why Apple gives the keyboard interrupt such low priority. When the computer gets busy, keystrokes start to lag. Sometimes, rarely, they are even lost.
The computer gets very busy with Flash websites. If you have several Safari Windows or Tabs running with Flash animation, the fans will start to rev up, a laptop will start to warm your legs (ok in the winter) and your keyboard will lag.
The computer also gets busy when you are editing a large Numbers iWork '09 document. Large for Numbers '09 is not really very big compared to many Excel documents that we are used to seeing in a business setting. This is because Numbers '09 constantly recalculates the document as you type. It doesn't wait for you to finish an entry, it just gets busy recalculating. They tried to address this recalculation problem in iWork '13 (Version 3).
In general, your spreadsheet work will go better if Numbers is the only app you have running. At least close windows, tabs and apps that you aren't using.
One lsat thing is your Free Memory. If you are short on RAM, Restarting your computer will free-up memory by releasing allocations for apps that you may have closed earlier. This is a pain, so it's best to install as much RAM as your computer will hold.
Jerry

Restricting data entry to a particular language in the form

Hi,
I created a multilingual form in which all the fields of the form are in a particular language . Now am trying to restrict data entry in the form to that language at the client side only . Say if it is a form in french, can we restrict the data entry to french only . The approach i was trying to implement was adding a script against the change event of all data fields and see if the characters lie in the range of the language unicode character set . But have not been successful in it yet . Can anybody help me find some way or provide any sample for it ?
Thanks

Hello, I'm German
Probably you can restrict the characters used for text entry, so for example ü is allowed in the German form but not in French.
But you will NEVER be able to restrict the users staying only writing French in French forms 100%.
1) You sometimes, not often, do encounter letters that are not typical for the language. (Though it can appear in any kind of word, it's quite regular for names.)
2) Let's say I fill the French form. I encounter a problem when I type in the word "Müller". This word wouldn't be French at all. The text will be delted and probably given an error message. Well... I learn out of this error message. Next time I'll type Mueller. ^^
(I knew several pages were people were restricted to talk English by forbidding letters that were not used in English very often... That didn't stop us violating that rule. The only error that really bugged us wasn't the restriction in not using letters that don't exist in English but the "please don't swear or insult so." error that kept appearing for ex. when we used the German word for "that" (= "dass"). They just didn't like the last 3 letters.)
3) Many countries have the same or include other countries unicodes. For example English could be written in the German form or in the French form.
4) You can't get out the syslanguage as far as I know. This would be a great hint which language the person is using.
5) I don't think you can use the spellcheck in any way... great violation against spellchecking could also be a hint for another language.
I know a quite big internetcommunity which did try to accomplish the same as you do. After about 2 years and a lot of experiments they stopped their efforts and were content by popping up the random error-messages warning that you don't have to insult, just like those other communities mentioned above. ^^ (Though they tried to restrict the insulting parts to the language used that didn't work out. Too many people knew how to insult in other languages ;D or which words were similar to insults.)
People just never do what they are supposed to do and are quite nasty finding workarounds...
My advice to you would be:
Don't make the effort.
Sorry for not being able to provide you with a solution, but the opposite.
Lisa

How to populate new record on data entry form based on search results?

Hello,
I'm new to jdeveloper im using version 11.1.2.1.0.
Usually Im using forms 10g.
I created search panel with table and its working but problem is how to transfer/populate all the field value according to that search result to New data Entry Form
by clicking the table record or a button.
Given :
TABLES,EO
1. PatientMasterIndex
2. PatientTransactionMaster <<---- master
3. PatientTransactionDetail <<-- detail relation
Here the scenario,
After Search of any patient, when i clicked one or more patient (which Jdeveloper allow multi select on jtable) on the table record it should automatically transfer or copied to the text field, i want to show on the form of PatientTransactionMaster like PatientNumber,PatientInsuranceNumber etc. to be save on db as new record, also non database field for view only like patient Name,address,age.
IN forms i can do that by :PatientTransactionMaster.PatientNumber := :blocksearch.PatientSearchNumber ,etc.....
or an item trigger to populate the said PatientTransactionMaster block. ( select .... into :PatientTransactionMaster.PatientNumber,etc....)
Any suggestion,links,sample is highly appreciated.
Sorry for my english.
Thank you very much

Hi,
Do you want to create a detail record that will include some values from your master record??
Or do you want to create a record with values from your Search criteria, only in the case you do not have any results?
if it is the second case.
When do you want to do that? After a press of button? or immediately?
In general you have to handle the values from search criteria.
Additionally, if you use ViewCriteria, you have to have bind variables for your search criteria that you will want to use.
So in general, you have to know the values by using bind variables, understand that the query has no results (This can be done in many ways, depending on your implementation. if you are using a button, you could make a disable condition with iterator.estimatedRowCount property.)
Perform the insert operation with the values from the bind variables.
Regards,
Dimitris.

Can I Create A Data Entry Form with iWeb?

I want members of my club to be able to make data entry selections each week directly to my web site via a data entry form, and have those entries stored for my retrieval and later posting. Can this configuration be set up in iWeb? Thank you in advance for pointing me in the right direction.

http://discussions.apple.com/thread.jspa?messageID=7465901
_Additional Info_

I am trying to delete one entry in forms data by highlighting and deleting it but it is not working. Thanks.

I am trying to delete one entry in forms data by highlighting and deleting it but it is not working. Thank

Lightroom - all versions
Windows
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
Mac
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

What can be considered as the business logic of simple data entry form

Hi all,
I want to separate my applications logic into layers. It is a simple data entry form and doesn't contain any complex business logic. So I want to get this simple business logic to different layer. But the problem is, I cannot clearly identify what are business logic of this kind of simple data entry form.
How do I separate business logic of this simple data entry form to another layer?
any help is appreciated,
Thanks in advance,
Dil.

dcminter wrote:
It is a [form] and doesn't contain any complex business logic. So I want to get this simple business logic to different layer. But the problem is, I cannot clearly identify what are business logic of this kind of [form].Are you asking which bits are business logic?
Suppose that the data comes into your system immaculate from some external system. Imagine that it will go out into some other system. The bits that you would still have to write are your business logic.That's a nice practical definition. Thank you, I'm stealing it.
Also interesting to note that validation falls into that category... say you're recieving data from a magical external source... you still have to validate it.
And of course you'd still have to store it somewhere, ans retrieve it.
Yep, I definately like that definition.
Cheers. Keith.

HFM tables for WDEF (Web Data Entry Form)

Hi all,
is there a way for understanding which tables are used by the HFM for storing the member selections of the WDEF (Web Data Entry Form)?
I was able to find only the table <application>_RPTS which contains the list of reports and folders I creted into the application.
Now, I would like to retreive the tables where the info related to the member selections are stored.
Can someone help me on this topic?
Thanks in advance
Christian

Payous999 wrote:
Dear All,
I have created simple Web Data Entry Form in Planning 11.1.2 and not able to load the data through it (cells are read only)
1. I have selected all the base level members for all the dimensions
2. In Scenario version selection of Start Year End Year as well as Start Period and End Period is OK
3. It is Bottom up version
4. Is Evaluation Order any issue?
5. Few days back while refreshing the database I receive the error 1060051 toi resolve that we need to delete the duplicate members from Oracle Table. We also deleted Essbase database and recreated the same
Thanks
PayousAre you logging in as admin, are they definitely all stored/never share level 0 members, is it a currency application.
Evaluation Order should not be an issue.
Point 5 is a little worrying, what did you do to resolve the issue? does it refresh without any issues now?
Cheers
John
http://john-goodwin.blogspot.com/

Data entry form to submit to a web Service using webcenter

Currently using Jdev 11.1.1.3, but have potential to upgrade to 11.1.1.4 or 5
Most examples I see in the docs is using web services in webcenter is to display data but I need to pass data to a web service to process the data.
Considering ways to show on a webcenter page a data entry form to send the entered data to a web service. Potential ways:
1. Use Omniportlet that is based on a web service and define for each of the fields a parameter mapped to a displayed field. Submit the data to the web service to be processed.
2. Use ADF syntax to create a web service proxy. Create a form with the needed fields, code a managed bean that uses the proxy code to submit the entered data in the form. Place the form on the webCenter page, but the webcenter already have a <af:form>, so a partialSubmit and autoSubmit set to "true" might be needed.
Haven't used either and would greatly appreciate ideas and suggestions.
Thanks

With the omniportlet, you'll also have to test the form and so on :)
My suggestion is indead an extra step but it is more flexible than just creation a DC from a WSDL. I already have done some implementation in Webcenter for web services and i started by just using the DC from a WSDL but soon i noticed that i needed more flexibility. That's why i suggest to create a proxy and create your own layer in front of it. This way you can easily control what you expose to your DC and do some initializations were needed. It offers a great deal of flexibility. That's why i suggest using the proxy + dc instead of wsdl + dc.
When you should decide for migrating to Webcenter PS3, you can even expose datacontrols to your resource catalog. This way you can create your DC in JDeveloper and allow the business users to put the data controls on the page. a realy nice feature.

Form data entry - tab vertically

Similar Messages

Maybe you are looking for