Bug report: Controls in the Data Entry property page reset when using relative time
Create a blank VI.
Drop a numeric control.
Right click and select "Display Format".
Change to a relative time.
Switch to the "Data Entry" tab page.
Uncheck the "Use Default Limits" boolean.
Try changing the values and you will see that they return to their previous values (inf, by default). This persists even after pressing OK and opening the dialog again. It looks like the values are held in a cache and put back into the controls, since if you change a page and go back to the limits page, it shows the correct values. I also managed to get it to display the values using the correct format (relative time), which I assume is what it should be doing.
This is in LabVIEW 8.6.
Try to take over the world!
Attachments:
Relative Time Data Entry Bug.vi 5 KB
I spent some time playing around with this in 8.6.1, and at this time do not consider it a bug - unless there is something I completely missed.
When you set to relative time, the inputs for data entry are expecting HH:MM or HH:MMS, depending on which display setting you chose. Typing a '7' is undefined - does the user mean hours? Minutes? Seconds? Parsecs ?
Once we type in a value that matches the format and we get the display to change, it is true that from now on if we type '7' in the field, it will automatically coerce it to 7:00, if we type 36 it coerces to 36:00. If we type 7.5, it does not change the value at all. I think at this point, the user knows what is going on, so this behavior is acceptable. After accepting the changes and re-opening the properties window, the limits are persistent.
I was not able to reproduce typing a '7' in the limit, having it automatically coerce back to '-inf', then going to a different tab or clicking ok, and coming back and seeing it as 7:00. It was still '-inf'. If you have some more details on this, maybe I can reproduce it, but from everything I tried, users are be able to enter values and these values are saved.
Edit - I am aware of the other forum post and the CAR filed there...
Message Edited by Robbob on 03-03-2009 11:20 AM
Rob K
Measurements Mechanical Engineer (C-Series, USB X-Series)
National Instruments
CompactRIO Developers Guide
CompactRIO Out of the Box Video
Attachments:
2009-03-03_105522.jpg 51 KB
2009-03-03_105336.jpg 58 KB
Similar Messages
-
Context Menu in WAD - disable the data entry active entries
Hi,
I have the following problem. We created an input ready query and brought this query via WAD into the portal. Inside the Web Template we have a SAVE Button and a Button activation the Data Entry possibility. Now when executing the Web Template, the user can save the data via the context menu (we have the steps "Data Entry Active -> Active | Save Changed Data | Reset Changed Data | Update ). Now we want to suppress these funcitonality, because using the SAVE button the systems starts a planning sequence for checking entries and a process chain with special funcition. The users must use the button, because the save function in the context menu does not execute the planning functions.
Maintaining the Web Template via WAD I don't have the possibility to disable these menu entries. If I disable all menu entries in the context menu web item, executing the Web Template displays only the Data Entry Active Menu . How can I suppress these special entries of the context menu, because I want to use other entries of the context menu and I don't want to suppress the context menu in total (I know that this is possible.)
Thanks in advance.
JuergenHi,
we have the same problem. I have found the following solution:
Use the following parameters for the context menu item to suppress the data entry active entries.
<bi:CONTEXT_MENU_ITEM name="CONTEXT_MENU_ITEM_1" designheight="70" designwidth="300" >
<bi:MENU_CELL_LOCKING value="" />
<bi:MENU_VALUE_RESET value="" />
<bi:MENU_DATA_ENTRY_MODE value="" />
<bi:MENU_REFRESH_DATA value="" />
<bi:MENU_SAVE_DATA value="" />
<bi:MENU_RESET_DATA value="" />
</bi:CONTEXT_MENU_ITEM>
It works for us.
Regards,
Benjamin -
Unable to get the data from ms sql stored procedures using crystal report 10
Dear,
I am using the crystal report 10 and MS SQL 2000. I created stored procedures and after making the connection, i am unbale the data from that procedure. When i run stored procedure on MS SQL server it works fine.
Please help me.
Best Regards
Pankaj
[email protected]Dear,
I am using the crystal report 10 and MS SQL 2000. I created stored procedures and after making the connection, i am unbale the data from that procedure. When i run stored procedure on MS SQL server it works fine.
Please help me.
Best Regards
Pankaj
[email protected] -
I had an interview question that is:
How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) From another server ex: Transaction server?
Set up steps so inset, update or delete operation takes place across the servers.
It would be great if someone please enlighten me in details about this process in MS SQL Server 2008 R2.
Also please describe would it be different for SQL Server 2012?
If so, then what are the steps?I had an interview question that is:
How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) from another server ex: Transaction server?
Set up steps so that inset, update or delete operation gets done correctly across servers.
I was not sure about the answer, it would be great if someone please put some light on this and explain in details about this process in MS SQL Server 2008 R2.
Also it would be very helpful if you please describe would it be different for SQL Server 2012? If so, then what are the steps? -
I have a problem in the data entry Visa card please help
I have a problem in the data entry Visa card please help
abdulaziz711 wrote:
I have a problem in the data entry Visa card please help
Is this what you mean...
http://support.apple.com/kb/TS1646
If no joy...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
How to Hightlight the Data in Jsp Page
How to Hightlight the Data in Jsp Page,
I am doing doing search page,based on values given search page those are sent to servlet,in servlet based on some conditions if particuler id i am getting then i am redirecting to Respective jsp page with highlight the data from database..
Thanks in advance..."Highlighting data in JSP sounds strange".
Without looking at your search specific algorithms I feel you are finally going to display a page (HTML content) to user which contains highlighted text. Highlighting is not directly related to server side language you use (JSP, ASP, PHP etc.). This is purely HTML and CSS. However, server side script (such as JSP) should generate HTML content for getting highlight effect.
Following HTML shows highlighted text using background-color property on span element.
<html>
<head>
<title></title>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
</head>
<body>
<p style="font-size:1.1em">This is a long paragraph which contains <span style="background-color: yellow;">highlighted text</span> and non highlighted text.</p>
</body>
</html>Thanks,
Mrityunjoy
Edited by: mrityunjoy on 14 Jun, 2010 3:30 AM -
Revision: 20976
Revision: 20976
Author: [email protected]
Date: 2011-03-28 09:20:34 -0700 (Mon, 28 Mar 2011)
Log Message:
bug fix BLZ 602 IPv6 address isn't properly resolved when used in dynamic url in the proxy service
checkintests pass
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/messages/HTTPMessage.javaFirstly, there's no such thing as Apache 9.3, there's Apache 1 (and subversions) and Apache 2 (and subversions). Your error message -
Oracle-HTTP-Server/1.3.28Shows you're using Apache 1.3.28
Secondly, I'm confused by your comment -
I do not have Apache 9.3 or higher but I think oracle should offer this in its companion CDOracle does offer the Apache server, if you're saying you didn't get it from Oracle then where did your Apache server come from?
Thirdly, I notice from your config file -
ErrorLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/error_log 43200"That you're piping the logs through rotatelogs, are you sure the logfiles haven't just been renamed? -
The data form formname is currently in use and is locked by user username
We run planning 931 on weblogic 91 and sometimes our administrators find our forms locked. So the are not able to edit them.
The following message appears +“the data form <formname> is currently in use and is locked by user <username>”.+
Off course it always happens with users who are not available themselves to unlock the form for others. ;-)
Only a planning windows service restart unlockes this. In our case the form is not unlocked after 2 hours.
I found this phrase via google. It suggests that there is a certain (time) propertie which unlockes the form after a given period.
Does anyone know where to set this property? Or to solve this otherwise.
Only one person at a time can use the Add a Row function on a particular form. When you have the form open, everyone else is locked out. If you close the form (using the X) instead of cancelling it, it will remain locked by you for the next two hours, even though it's not on your screen anymore. If this happens, you will be the only one who can reopen the form. You can unlock the form by reopening it and then clicking the Cancel button to exit properly.no solution found. A restart of the services did the job. Hopefully this is not necessary again.
-
Does anyone know how to display (in LabVIEW) the memory use during execution of an image and data acquisition VI to predict when it is time to cease the acquisition to prevent the program crashing?
I am acquiring images and data to a buffer on the edge of the while loop, and am finding that the crashing of the program is unpredictable, but almost always due to a memory saturation when the buffers gets too big.
I have attached the VI.
Thanks for the help
Attachments:
new_control_and_acquisition_program.vi 946 KBTake a look at this document that discusses how to monitor IMAQ memory usage:
http://digital.ni.com/public.nsf/websearch/8C6E405861C60DE786256DB400755957
Hope this helps -
Julie -
How can we export the data from OAF Page to Excel instead of .csv or .txt
Hello,
How can we export the data from OAF Page to Excel instead of .csv or .txt
When i click on the export button it is exporting to txt file, But i need to export the data into Excel by default
Please help me
Thanks in advance
Thanks,
Raju
We have changed the below profile option to get the data in excel by default
Profile Name Export MIME type
Profile Code FND_EXPORT_MIME_TYPE+
Existing Value: text/tab-separated-values+
Change as: Excel
Thank you,
Raju
Edited by: 1006649 on May 21, 2013 10:55 AMWe have changed the below profile option to get the data in excel by default
Profile Name Export MIME type
Profile Code FND_EXPORT_MIME_TYPE+
Existing Value: text/tab-separated-values+
Change as: Excel
Thank you,
Raju -
Please can someone help me to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3G or GPRS on safari with an iphone 4GS and latest software updates. I have tried resetting the network and phone settings. I have restored the factory settings on itunes and still the problem persists.
All iPhones sold in Japan are sold carrier locked and cannot be officially unlocked by the carrier. If you unlocked it, it was by unauthorized means (hacked), and support cannot be given to you in this forum.
Hacked iPhones are subject to countermeasures by Apple, particularly when updating the firmware. It is likely permanently re-locked or permanently disabled.
Message was edited by: modular747 -
I have written a binary file with a specific header format in LABVIEW 8.6 and tried to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?
I can think of two possible stumbling blocks:
What are your 8.6 options for "byte order" and "prepend array or string size"?
Overall, many file IO functions have changed with LabVIEW 8.0, so there might not be an exact 1:1 code conversion. You might need to make some modifications. For example, in 7.1, you should use "write file", the "binary file VIs" are special purpose (I16 or SGL). What is your data type?
LabVIEW Champion . Do more with less code and in less time . -
Change the data selection tab page in an InfoPackage
Hi SDN Community,
Is it possible to have an Infopackage and change the data selection tab page ? Because I would like to know if I can change the select-options by a parameter.
For example: Now you can enter 01.01.1950 as the start date and 31.12.9999 as the end date,
I only want that the user enter the start date.
Thanks a lot,
best regards.
AnaYes, I tried an abap routine option and the result is not good because the user can't put the information in the low (start date) parameter.
Thanks -
Lost all contact info. All my Aps are there but all the data/progress is missing. When I plug my iphone into the usb fto synch up with my itunes on the computer a message comes up and says "enter the password to unlock your iphone backup file". This is very frustrating
I suggest trying the update again after an hour or two. Sometimes, the notice that an update is available comes an hour or two before the developers actually sends the revised app out to be downloaded.
-
How to transpose the data records (rows) to column(lists) using apd
Hi,
how to transpose the data records (rows) to column (lists) using apd in sap bw.
I do not want to use abap routine.only use the transpose rows to list transformation .
Pls provide the step by step procedure .
thanks,
NimaiSave youe file to transpose as a csv and in the header row of your file for the columns you want to transpose you need to put some soer of a tag before the column name (ie your colum header was for a period budget will be something lie 2011001:ZFIBDD)
1. You will need to create a new apd process (rsanwb)
2. Insert a "Read from Data File" data source object and map it file (,csv)
3. insert a transpose object into your apd process (middle row 4th one over in the transformations section)
4. under the definition tab in the transformation object select all the columns that are to be transposed into rows and move them to the transformed area, the grouping fields section should contain the rows that you want to now be columns
5.under the transformation tab enter in the seperator you selected under the Field Name/Infoobject area (ie. ZFIBDD)
6. under the details tab you need to enter in all the fields to be transformed and tner the transposition field (ie ZFIBDD)
7. Then you can insert a set of transformations and a DSO and link the newly transposed fields into that.
hope that helps
Maybe you are looking for
-
Hi Experts, plz tell me which report i can use to extract the bank details saved in the infotype 9. My requirement is how will i know after running the payroll that for which employee the payment should go to the bank and for other to cash? Plz help.
-
How to add two date format in web i report.
Hi Every One, I have Fields like Start Date,New Date, Close Date, End date balance. that Fields all are in date format like start date(05/05/14), New date(06/05/14),Close date(09/05/14) But i need result (start date+new date)-close d
-
Classic Application Administration vs. Administration within the workspace
Can someone tell me the Pros and Cons of Classic Application Administration vs Administering the App from the Workspace? We have always used Classic and I would like to know if it would be worth the effort to convert over.
-
Middleware for ocustomer master changes
Hi, I am a SD consultant with an idea in CRM. We are maintaining CRM 6.0 and ECC6.0. Both are now loaded with initial data loading of customers and materials. We have a requirement " whenever there is a change in the customer master's any field in EC
-
In which topics business objects is/will using cal?
<p>Hi, I repeat my question from my last post as a new topic. </p><p>In which areas is or will your company business objects using the new language?</p><p>Klaus </p>