Form deactivated after transport.

Hello,
I have activate implementation HRFORM_AFTER_TRANSP however my form is still not active after a transport.
Seems the BADI may not be triggered?

no, it is as per - http://help.sap.com/saphelp_erp2005vp/helpdata/en/a5/0431b6ae76f84786c355cb353d5c92/frameset.htm
I just cant seem to trigger this badi.

Similar Messages

  • Update rules deactivated after transporting cube with zero elimination on

    Hello,
    The update rules were deactivated in the quality system after transporting the cube with the zero elimination flag switched on.  However, the update rules in development were not deactivated when setting the zero elimination flag.  So, the update rules in the "From" system were not deactivated.  This only happened  in the "To" System.  Does anyone know why?
    Thanks,
    Maureen

    If there is any change you did on cube, you need to re-activate your update rules.
    Re-activate your UR and transport it. It should be ok.
    Hope it helps..

  • Deactivated objects after transport of Analytics Security Object

    Hello Experts,
    We made a release Upgrade to 7.3. To garantee the access to our reports I implemented a lot new Analytics Security Objects. In our development system they are all activated. After transporting them into the quality system, all of them are deactived and not usable.
    Do you have any ideas?
    kind regards
    Frederike

    Hi Sujai,
    Just check is your ODS object Locked or any process job is running on it.
    Was your transport successful.
    Thanks
    CK

  • In which situation I need to active objects after transport

    Hi Experts,
        I'm wondering in which situation I need to active object after transport?  In some cases, I have to active transformation, DTP, infoobject, multiprovider....  Does any one make a conclusion of that?
        thanks in advance.
    Eric

    Sometimes, because of impact of a transport some other objects will be deactivated, then we need to manuaaly activate the objects after transport.
    Also, sometimes transport after import process could not be able to activate the objects, then also we have to activate them manually.
    Or suppose, you have moved and infoobject, due to which some other objects become inactive (where ever infoobjects is being used), then we have to activate them manually, if you dont want to transport them.

  • After transporting the TTF is not been used

    Hi all,
    I have installed a true type font (se73). After the installation I use it on a smart form style and it is shown ok.
    The problem is that after transporting it to integration, the forms are not using the one I installed but a standard instead.
    Hints:  - all was on the same transport order and it has been transported ok.
               - everything is active
               - I have allready read the note 421518 and i have executed the report RSTXDELL

    Are you checking by print preview only, or by printing?
    Which device type is defined for your printer? (SPAD transaction, display the output device)
    If the device type is a custom one (Y* or Z*), could you tell us what sapscript (OTF) driver it uses? (SPAD, double-click the device type).
    The font conversion algorithm is based on the fonts allowed for each device type (they are called "printer fonts", and are maintained via SE73 transaction). You may verify which font conversion is done via SE73 transaction, choose "printer fonts", double-click the device type, and click the "font conversion" button.
    To make sure, you may also see the converted font after the spool has been generated (the font conversion is applied before the spool is generated): display the spool in raw or hexadecimal view in SP01 transaction, the font lines are starting with FT characters followed by the converted printer font name.
    Could you tell us what are the results of the font conversion in SE73 for your device type?

  • Tab un alighned after transporting sapsript.

    Tabs are un aligned after transporting sap script in to qality.
    it displaying properly in dev but the header data is not aligned in qa.
    Is there some thing which I need to take care.
    Please let me know if any suggestions.
    Thanks,

    got to se71 open ur form--> (both in dev and Qty)
    in that click paragraph formate-->(both in dev and Qty)
    check ur each  paragraph by clicking on it
    down u will find the option as font-->
    there u check ur font family and there font size....weather both r same r not......
    if both r same......retransport the same request
    this will help u.
    Regards
    Anbu

  • ADOBE FM not exist after transport

    Hi dears,
    I'm facing to a problem with an adobe form transport.
    In dev, adobe works fine. I've transported the adobe in acceptance, after the transport, I test the adobe.
    Transaction sfp, test button.
    So I reach the initial screen of FM module. The FM is called /1BCDWB/SM00000007 and when I execute it, I've a dump. It's say:
    Short text
        The function module is not active or contains no code.
    What happened?
        The function module "/1BCDWB/SM00000007" is called, but
        cannot be found in its function group.
        Error in the ABAP Application Program
        The current ABAP program "/1BCDWB/SM00000007============FT" had to be
         terminated because it has
        come across a statement that unfortunately cannot be executed.
    I know that with smartforms sometimes we need to regenerate the SF after transport with the option in the menu generate.
    I go in form object menu Form Object (first one) and choose generate.
    I've the information message (in green):
    Unable to find include '/1BCDWB/LSM00000007U01
    and the FM is not yet avaible
    In dev this manipulation generate works fine but not needed.
    Su53 in acceptance is ok last authorization wheck was successful and adobe in acceptance (the form and interface with sfp) are ok.
    Any help is welcome
    Thx in advance
    Vincent

    Hi Vincent,
    Similar to SMARTFORMS in adobe forms also the FM have a different name in different systems.
    So wherever you are writing the code to call your adobe form call FM: FP_FUNCTION_MODULE_NAME and get the fm name from there, replace your FM /1BCDWB/SM00000007 with the variable in which you are getting your Forms FM name.
    For example:
      CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
        EXPORTING
          i_name     = <Your form name>
        IMPORTING
          e_funcname = lv_funcname.
      CALL FUNCTION lv_funcname
        EXPORTING
          git_item       = git_item
          gs_header      = gs_header
        EXCEPTIONS
          usage_error    = 1
          system_error   = 2
          internal_error = 3
          OTHERS         = 4.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    Regards,
    Vaibhav

  • Doubled entries after transport

    Hi,
    We decided to make some modification in DEV (delete and recreate new KPIs, delete and recreate new metrics sets).
    After Transport to QUAL, Some entries are doubled (twice the same KPIs linked to a objective, metric sets doubled...). We checked in DEV and everything is OK. We did again a transport deleting QUAL database before but same results.
    Is there any cache or something to delete before transporting ?
    The former transport finished correctly. The only difference is that we noticed that users in QUAL are all doubled (2 same entries for each users !!!).
    Thanks
    Matt

    Hello,
    I saw in the support case text that you had imported data previously and did not get duplicate metric sets until this last recent import.
    After the successful import had any thing changed with user assignments or group changes at all?
    One thing to test is to send your Zip file to Support and ask them to import it into a clean test system and see if they see duplicate metric set entries.  That would tell us if the 'duplicate' entries are in the export file or not.
    That's probably easier then worrying about deleting and backing up data. 
    Are all metrics sets duplicated or only new ones that were loaded from the other system?
    It's always a good idea to open a new browser session and clear the IE cache, then login to SSM just to be sure the duplicates are not some cached entries.
    If you have 'preserve favorites website  data' selected and you have SSM urls saved as favorites, please turn this off.
    Thanks,
    Bill

  • EPM Context Unlock after Transport

    Hi
    After transporting Input forms from Development to Quality server the context on every sheet got unlocked.
    As i don't have page axis for some reports and have manually selected and locked the dimensions in the context itself.

    Hi,
    Check following note :
                             1821026  - EPM-XLS - Context Lock settings lost after transport            
    Please install latest version of EPM add-in and try again.
    Hope it helps...
    regards,
    Raju

  • View modification in ODS after transport to production

    Hi,
    It's possible to see all modification in ODS after transport?
    I would like to see the modification that was done in Navigation Attributes of ODS.
    Thank's
    Cesar G. Batista

    HI
    When you double click on ODS you see a info button(i) click on it it will pop up save and activate button these yo can see the last log.
    Hope this helps!!
    Thanks
    Santosh RC

  • Issue with migrated transformation rule after transport

    Hello all,
    We have migrated couple of update rules and transfer rules to transformation rules. All the transformation rules are active in development environment.
    The issue is when we transport these transformation rules to QA, one of the fields of datapacket dimension "RECORD" becomes &R1& in the global structure of start routine and therefore, transport fails in QA. Along with this we had another issue that if we add any additional fields in the cube or ODS structure, the global structure in start routine doesn't change after transport in QA. Basically, it seems like it doesn't do anything when we do transport.
    We tried couple of things by transporting entire flow inclding target and source objects, we also tried transporting only transformation with overwrite mode. But none of the things worked. We also have logged the message with SAP.
    SAP suggested us to open the QA environment and perform the change manually. We did it and obviously we could activate the transformation rules. But when we tried to re-transport the transformation, it is keep failing with the error "Syntax Error". My assumption has after the transport, the field has become &R1& again.
    Has anybody faced such issue? We are on Ehp1 SP7.
    - Danny

    Thanks Murali,
    Yes as I mentioned SAP suggested us to open the box and do it manually, but once we are done with the manual changes, we tried transporting the same transformation rule again, which I guess going to be the case in case of any future enhancement. Transport failed and it says "Syntax Error".
    The transformations we activated manually in the target system are active, but when we try to load the data, it throws the exception error.
    Any clue ?? Is it working fine in your system after you did manual changes? Did all future transport go well ?
    - Danny

  • ALV Title Not Display after transporting the Programme from DeV to Qlty

    Hellow Experts,
    i developed one ALV report with two screens, i transported the report from Development server to Qulaity server.
    in Development server report are working fine  but in Qulaity server after transporting the TiTle of ALV not display , plz give me some hint , below is my code to display alv title
    DATA: alv_grid       TYPE REF TO cl_gui_alv_grid.
    DATA:alv_grid_ref type ref to CL_GUI_ALV_GRID.
    DATA: layout    TYPE lvc_s_layo.
    layout-grid_title = 'Daily Material Reports.' .
    DATA: fieldcat  TYPE lvc_t_fcat.
    I m using  ALL METHOD alv_grid->set_table_for_first_display method for display alv .
    Thanks,
    Regards
    Neha.

    Hi neha,
    use the sap/help link to solve your issue,
    [http://help.sap.com/saphelp_erp2004/helpdata/en/0a/b5533cd30911d2b467006094192fe3/content.htm]
    if not use the below example code ,
    Heading 3 :h3  Set the title of the grid
    Fill the grid_title field of structure lvc_s_layo.
    Note that the structure lvc_s_layo can be used for to customize the grid appearance in many ways.
    DATA:
    ALV control: Layout structure
    gs_layout TYPE lvc_s_layo.
    For example :
    Set grid title
    gs_layout-grid_title = 'Flights'.
    CALL METHOD go_grid->set_table_for_first_display
                EXPORTING
               i_structure_name = 'SFLIGHT'
    is_layout      =gs_layout*
               CHANGING 
              it_outtab   = gi_sflight.
    Regards,
    Saravana.S
    Edited by: saravanasap on Dec 21, 2011 8:13 AM

  • Error after transport of Virtual Cube with Services

    Hi All,
    would any body can suggest me how we can change the source system assignment in QA or Production client for virtual Cube with Services.
    A virtual cube is created with Services using the settings for RFC and using the logical source system. however after transporting the same to the QA system the Logical Source System has not changed and thus it is giving error " Error occured while determining target system for the logical system" would any body can suggest me how i can change the logical source system assignment in QA system for Virtual Cube with services.
    Points would be rewarded appropriately.
    Cheers
    Noor

    Hi Noor,
    Check this link, it may help you.
    Re: Transport issue - Source system does not exist
    Regards,
    Vijay G.

  • Hierarchy Analysis Authorization does not work after transport

    Hi Gurus,
    I am facing a issue in hierarchy analysis authorization in quality system but the same authorization works perfectly fine in development.
    All hierarchy authorizations works in Quality except for this one. I found one old sap note describing this as program error but this note is not applicable in BW 7.3.
    I have checked the table RSECVAL, RSECHIER and authorization is active so everything looks good. Please advise if anyone faced this issue after transporting hierarchy auths to other systems
    Regards,
    Salman

    Salman,
    What I understood from your description is that you have same role+AA in Dev and QA, which provides access in Dev for all the nodes for said hierarchy but in QA, same role+AA provides access to the same hierarchy for all the nodes but one. Try to create a ZTEST analysis authorization in QA itself with access for the problematic hierarchy node and see if it works ? This will rule out the case if there is a difference in hierarchy in DEV & QA.
    Regards,
    Shivraj Singh

  • If i download any file which is prepare on microsoft office 2007 . The file have been download without extension of the prog. Means if files name is "1,docx" when i download from firefox it download in that form "1". after download i have to rename and gi

    If i download any file which is prepare on microsoft office 2007 . The file have been download without extension of the prog. Means if files name is "1,docx" when i download from firefox it download in that form "1". after download i have to rename and give the extension name is plz tell me the way that office files are compatible with it.
    == This happened ==
    Every time Firefox opened
    == when i download the office files

    In Firefox Options / Privacy be sure "Remember download history" is checked. To see all of the options on that panel, "Firefox will" must be set to "Use custom settings for history".
    To find your OS information, on your Windows desktop, right-click the My Computer icon, choose Properties, under System on that small window is info about your OS.
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Maybe you are looking for

  • Crystal layout previews fine in Crystal, but not in SAP.

    Hi, I've built a simple report in Crystal based upon the Goods Receipt Header and Goods Receipt Rows Table. I've included the DocKey@ paremeter I've set the correct select record: {OPDN.DocEntry} = {?DocKey@} When I preview the report in Crystal, Cry

  • Locked out of iMatch:  iMatch/HomeSharing/Apple ID Questions

    I purchased an iTunes Match subscription in November (with my Apple ID).  We recently gave our son an iPod and set him up on a separate Apple ID.  He has a separate log-in on our computer and I used Home Sharing to transfer some songs over to his log

  • How to get rid of Apple logo?

    When I am making a DVD project to be burned I see a small white Apple logo in the lower right. I don't want this to be there when I burn my DVD because it will be a gift. How do you get rid of this/will it go away when burned?

  • Purchase Import Procedure in B1

    Would request you all to please provide me with the complete procedure for purchase import in B1.

  • Unable to Import  Hyperion FR reports.

    I exported the FR reports in Production server and wanted to import in development server. I am getting the following error message when i try to import Required application module reporting.HRImport is not configured. Please contact your administrat