Form Error with Subtraction?

I'm doing the following simple calcuation:
Round(Row15.NumericField2-Row12.NumericField19)
but I keep getting an error saying that accessor Row12.NumericField19 is unknown?
I'm confused, does it have something to do with the subtraction?
Thanks for the help!

Row12 and Row14 are defined to repeat row for each data item, as depicted below for Row12. I am not sure if those settings are intentional. If they are not, un-checking the property will enable the calculation successfully.
Steve

Similar Messages

Error with hyperlink to open a form in Workflow Notification

Hi All,
I am trying to create a hyperlink to open a form in Workflow Notification. I want to open "Prepare Mass Additions" form from my workflow. I am in R12 (12.1.3) and there is no parameters defined for this function.
So i am trying the method given here:
http://oracleappsnotes.wordpress.com/2011/04/15/accessing-oracle-forms-from-workflow/
Below is a summary of steps from this blog:
Register a new custom form function with a parameter CREATE_BATCH_ID. Function name is XXFAXMADDS. Its just the seeded FAXMADDS form function, just with the addition of parameter.
Create an attribute of type ‘Form’ which stores the name of the form function and the parameter with which we want to call it. The default value of the attribute is XXFAXMADDS:CREATE_BATCH_ID=&BATCH_ID
In a workflow process include a notification message.
Associate the attribute with the notification message
Personalize the new form function, to add actions to assign the value of parameter to the form field, then goto the Find Button, and click it.
    When i click on the link in notification, I am getting the below errors:
    FRM-47023: No Such parameter named G_QUERY_FIND exists inform FAXMADDS
    FRM-40105: Unable to resolve reference to item PARAMETER:G_QUERY_FIND
    FRM-47023: No such parameter named CREATE_BATCH_ID exists in form FAXMADDS.
    Why is this error? Why it is referring to G_QUERY_FIND which i have not at all used?
Thanks
Manu
Message was edited by: manu.mur

Hi Hussein,
Clearing cache or bouncing application did not help. And now i am noticing that the value of this attribute does not change according to the changes i make in workflow builder.
Also, i tried by updating the workflow attribute from Workflow Admin, retried the notification and tried the link again. No help.
I tried updating attribute to just the standard form function name, still same errors!

Error with Drop -down UI elements in my HCM PF Form

Hi All,
I am facing some error with Drop -down UI elements in my HCM PF Form. I have some 2-3 DD elements, which are not binded to any backend field, so i am specifying their values in the UI Properties itself.
I am able to see my drop-down list values when the form first displays initally. On selecting the values from drop down, when i click on 'Check and Send' button, the form refreshes itself, and all the drop down values dissappear, along with the selected value.
Can anyone tell me if i am missing anything here ? Do i need to define my DropDOwn field in the Generic Service of HCM PF and then Bind it in the form ?
Any inputs on this would be welcome !
Thanks in advance,
Aditi

Hi Christopher,
Am also having the same issue like when am testing the process and clicking on check button, my do_operation method is called and the table SERVICE_DATASETS is getting updated. I am getting success message and all the fields are getting cleared. But when am clicking on second time the CHECK button am getting error's, because of the fields getting cleared in the screen.
But after executing the process all the fields getting refreshed. Even what ever values I have entered that too is getting cleared. I have debugged and not able to figure it out why its getting cleared.
I have activated the ISR context mapping and activated the Adobe Form too. I dont know where am going wrong.
I will be doing the context mapping for ISR via IMG path by clicking the "Compare Form Fields button" also using Tcode HRASR_DT also i have tried.But the form is consistent.
Do we have any note or patches regarding this issue.
Please help me out form this as i could not process further in my development.
Thanks & Regards,
Raja

10g Forms Builder with error "cannot attach library" opening R12 fmb file

Hi all,
I had set up my Forms Builder with all the necessary PLL and FMB files for developing R12 custom forms. I have used the builder to do few custom PLLs and one custom form, and I did not have any problem opening seeded Oracle Forms. Today when I need to enhance that custom form I did 2 weeks ago and I opened Forms Builder, I got the error "Cannot attach library.." for APPCORE, APPDAYPK, etc.. Same error for opening TEMPLATE.fmb.
I have done these to troubleshoot:
1) I verified my Windows XP registry "FORMS_PATH" to include the folder where I store all the PLLs and FMBs.
2) I updated default.env to include that file path.
3) I create shortcut to Forms Builder and put folder path with PLLs under the "Start in" field of the shortcut.
4) I rebooted my machine after changing the registry
5) I moved the folder with PLLs to under C:; I seperate PLL to "resource" sub-folder and FMB to forms/US/ sub-folder just like the server structure.
6) I install one more copy of Developer 10G Suite and set up the registry.
None of these work and the key is it used to work with no issue. Any suggestions what may be the problems?
Thanks!
Mike.

Turned out I reloaded all the $AU_TOP forms and PLLs to my desktop and it worked fine. I think I did not FTP correctly the first time.

NeeBeans - Form loaded with errors

Using NetBeans 6.00 Windows.
I created a form class extending JPanel and inserted the class in Palette.
public class ObjPrivUser extends javax.swing.JPanel Then, I created a second class extending JPanel, including the first class.
public class GrantsByUser extends javax.swing.JPanel {
private void initComponents() {
objectPrivUser = new ObjPrivUser(db);
private GUI.Panels.ObjPrivUser objectPrivUser;
...Everything was ok, when I open the second class I can visualize all components. Until yesterday, when I opened the class and receive a message "form loaded with errors".
I recreated both classes, but today the same error has occurred.
Any sugestion?
Xks,
Fornari

Recompile from your source, something is not nice in your file.

Error trying to open an Excel worksheet...getting Visual Basic MS Forms error

Hi
We have just upgraded a user from Office 2007 to 2013. However he is now unable to open an Excel spreadsheet and keeps getting Visual Basic errors
MS Forms error. “Could not load an object because it is not available on this machine.”
Acknowledge the error then..
MS VBA error “Compile error Can’t find project or library”.
On acknowledging and closing VB window the spreadsheet is available although VB is not running.
VBA Project (Microsoft Forms 2.0 Object Library). However we still received the same errors.
So we reinstalled Office 2013 to see if this would update the dll files. Alas the same error. Another user who works with VB said the FM20.dll files should be deleted and replaced with new ones. We acquired another FM20.dll file deleted the older one and
replaced it in the folder. Rebooted but still the same error.
He is using a 64bit Windows machine with Office 2013 click2run installed.
We have spent 6 hours today trying to fix it with no luck.....Please can you help??
Br
Dan

Hi,
This is the forum to discuss questions and feedback for Microsoft Excel, this issue is more related to the Office develop, please post your question to the MSDN forum for Excel
http://social.msdn.microsoft.com/Forums/en-US/home?forum=exceldev&filter=alltypes&sort=lastpostdesc
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

There are some form errors after upgrading ebs from 12.1.1 to 12.1.3

Hello , EBS experts,
I have some upgrading issues need your great help. thanks in advance!
We have installed EBS 12.1.1 on Oracle Linux 5.7, everything is okay.
Now, we need to upgrading EBS from 12.1.1 to 12.1.3, after all the upgrading process were done. We have encountered the form error while opening the AR transaction forms as below
ORA-01403: no data found
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-04062.
Lots of Receivable forms have the same issue, I have upgrading the ebs from 12.1.1 to 12.1.3 with 2 times, but every time, I have encountered the same issue.
Can anyone have me? it's very urgent for me to finish this task, thanks!
Here is my upgrading process for your reference
1. Installed the EBS 12.1.1 and everything is okay(Create a AR, AP transaction and invoice and post to gl).
2. I have referenced this document to upgrading the EBS
Oracle E-Business Suite Release 12.1.3 Readme [ID 1080973.1]
To apply Oracle E-Business Suite Release 12.1.3, follow these steps:
1） 9239089
2） 9239090（US）， then applied the 9239090_zhs as I have the zhs language on the EBS 12.1.1
3) 9239095
Post-Update Steps
1. Apply post-install Oracle E-Business Suite Applications Technology patches. (Required)
4)9817770
5)9966055
2. Update database tier nodes with the Oracle E-Business Suite Release 12.1.3 code level.
Application tier:
Database tier:
3. I have applied the following patches before upgrading to 12.1.3(before step 2 as above)
Database Preparation Guidelines for an E-Business Suite Release 12.1.1 Upgrade [ID 761570.1]
Database Preparation Guidelines for an Oracle E-Business Suite Release 12.1.1 Upgrade
Patch E
B) For users on 11.1.0.7:
7111245 - 7684818 also includes 7111245 but this is a later version of the patch. Disregard errors related to 7111245 being installed when applying 7684818.
7211965
7330434
7486407
7627743
7639602
7684818
8199107
8639653
8940108
9026927
9066130
9554727
9743057
(I have compared the above patches with my db(ebs 12.1.1 ) and some patches have already been applied based on EBS 12.1.1), and the following patches were not included on the db, so I applied the following patches one by one
7684818
8199107
8639653
8940108
9026927
9066130
9554727
9743057
Modify Initialization Parameters
disablefast_validate=TRUE
pgamax_size=104857600
Can anyone help me on this issue? thanks!
Open AR forms such as transaction, receipt, etc, and always encountered the same issues as below
ORA-01403: no data found
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-04062.
The AR forms opened failed. thanks!
Thanks!
Chuan Ling

Hi, Helios,
Thanks for your great help on this issues.
Here is my verification result for your reference as below
1.Known errors generated on the People form (PERWSHRG) [ID 206584.1]
10 - Error: FRM-40735:PRE-FORM trigger raised unhandled exception ORA-04062.
ORA-01403:no data found
APP-FND-01242:cannot read value from field: GLOBAL.G_NAV_NODE_USAGE_ID
Cause: The field: Global.G_NAV_NODE_USAGE_ID couldn't be located or read.
Resolution: This is an issue associated with multiple APPL_TOPS. Ensure
that references to the APPL_TOP are pointing to correct one.
I don't know how to fix this? do you know?
2.After Upgrade From R12.0.4 To 12.1.1 Property Manager Forms Give Error FRM-40735 [ID 1092394.1]
[r12app@infsgvm14 forms]$ strings -a $PN_TOP/patch/115/sql/PNPFUNCB.pls | grep '$Header:'
-- $Header: PNPFUNCB.pls 120.19.12010000.12 2010/03/26 10:43:10 rthumma ship $
my file's version is 120.19.12010000.12, so ignore this step
3.Property Manager Forms Error FRM-40735 After Upgrade From 12.0.6 to 12.1.2 [ID 1091124.1]
did you know how to set this 1) Please set Property Manager status to "Installed" via License Manager.
I don't find this on license manager.
4.Frm-40735 Ora-04062 When Trying To Open Transactions Form [ID 1363671.1]
just checked the custom.pll and custom.plx and they are existed in AU_TOP/resource, I want to re-generated this custom.plx using this
frmcmp module=CUSTOM.pll userid=apps/apps@hostname module_type=LIBRARY
but have some issues.
[r12app@infsgvm14 resource]$ frmcmp module=CUSTOM.pll userid=apps/[email protected] module_type=LIBRARY
Forms 10.1 (Form Compiler) Version 10.1.2.3.0 (Production)
Forms 10.1 (Form Compiler): Release - Production
Copyright (c) 1982, 2005, Oracle. All rights reserved.
PL/SQL Version 10.1.0.5.0 (Production)
Oracle Procedure Builder V10.1.2.3.0 - Production
Oracle Virtual Graphics System Version 10.1.2.0.0 (Production)
Oracle Multimedia Version 10.1.2.0.2 (Production)
Oracle Tools Integration Version 10.1.2.0.2 (Production)
Oracle Tools Common Area Version 10.1.2.0.2
Oracle CORE 10.1.0.5.0 Production
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
so, it's strange.
Thanks!
Chuan Ling

Tips for blue screen (BSOD) errors with Windows Vista and Intel Turbo Memory on T61/T61p

Important note: The symptoms and solutions described below address only a small subset of the possible causes for blue screen errors, aka BSOD. This information can help address blue screen errors specifically related to Turbo Memory, but may not solve errors related to other issues. Please read through the instructions completely, make sure they apply to your system, and after attempting the solutions please post back with your feedback for the community.
Some users may experience random blue screen errors with ThinkPad
systems running Windows Vista with Intel Turbo Memory hardware. These
blue screens may occur during normal usage on the system or they may
occur when booting into Windows Vista. Blue screens related to the
Intel Turbo Memory hardware may reference a stop code of 8086 with
memory address locations of {0, 0, 0, 0}.
There are two main steps that you can take to help resolve blue screen issues related to Intel Turbo Memory.
Step 1: Update Intel Turbo Memory Driver
If the driver version is before version 1.0.1.1004-7.0.3.1001, please
update to this version.
To determine what version of the Intel Turbo Memory driver is installed:
1.    Click Start, then click Control Panel.
2.    Click System and Maintenance.
3.    Click System.
4.    Click Device Manager.
5.    Expand the Storage controllers category.
6.    Double-click Intel Flash Cache Logic Chip.
7.    Click the Driver tab. Then you will see the driver version (for example, 1.0.1.1004).
The new driver and installation instructions can be found here.
Note: The Intel Matrix Storage Driver is updated with this package.
Step 2: BIOS version
If your BIOS version is older than those listed below, please update to the version listed.
How to check your BIOS version:
Turn off the system.
Turn on the system.
While the To interrupt normal startup, press the blue ThinkVantage button message is displayed at the lower-left area of the screen, press the F1 key.
The
BIOS Setup Utility menu will be displayed. If you have set a supervisor
password, the BIOS Setup Utility menu appears after you enter the
password.
Check BIOS Version and Embedded Controller Version.
Turn off the system.
System BIOS versions:
ThinkPad T61/T61p (14.1 inch widescreen with IEEE 1394 model) - BIOS version 1.22 (7LET52WW)
Please
remember that these updates do not solve every possible system blue
screen, but they do resolve several problems related to the Intel Turbo
Memory driver.
Message Edited by Tim_Lenovo on 11-30-2007 07:03 PM
Tim Supples
Lenovo Social Media
Got a question? Don't PM me, post it on the forum!
Lenovo Blogs
X60 Tablet SXGA+ primary, Z61p fully loaded workhorse

Thanks Tim,
I do have my T61p fully up-to-date to the latest drivers and updates (via System Update and the Drivers&Software web page when the former is not that up-to-date).
At the moment the most recurrent problem is this:
http://forum.lenovo.com/lnv/board/message?board.id=T_Series_Thinkpads&thread.id=55
which has been longly speculated here:
http://forum.thinkpads.com/viewtopic.php?t=47755
My other angst is the boot-time chkdsk hang-up problem:
http://forum.thinkpads.com/viewtopic.php?t=52765&highlight=chkdsk
I just wonder if this purely a Vista issue when using NV cache, the disk spinning down at almost exactly 1 hour from the beginning of the chdsk operation seems too much of a coincidence.
This is my T61p configuration:
Intel Core 2 Duo T7700 2.4GHz
BIOS version 1.26-1.06
4GB RAM 2 SO-DIMMs
nVidia Quadro FX 570m with 512MB VRAM
WUXGA LCD
Seagate 7200.2 160 GB
4GB RAM 2 SO-DIMMs
Windows Vista Ultimate 32bit (waiting to move to 64bit)
thanks,
andrea
Message Edited by abarbieri on 12-05-2007 03:48 PM
T61p - 15.4" - T7700 - FX 570M 256MB - 4GB RAM - ST916023AS - 4965AGN - BT - FPR - 9 cell - Vista Ult. x86
T21p - 14" - PIII 850MHz - S3 Savage/IX 8MB - 512MB RAM - 100GB 7200rpm - WinXP x86

Smart form error

Hi Abapers,
i'm getting an error while printing a form.
error descr.: -
Output could not be issued
Message no. VL086
Diagnosis
An error occurred in the message processing program.
Procedure
Contact your system administrator
Also if I run my smartfrom independently i got message like this
Exception FORMATTING_ERROR
Message ID: SSFCOMPOSER Message number: 601
Message:
Reference field GS_LIKP-ZWEIGHWT unknown in form.
with 0 entries

Hi Adams,
The error is for field GS_LIKP-ZWEIGHWT. It seems to be a quantity field. If it is then you'll have to maintain a reference field for it in you Smartform. To do this -
Goto Global Definations -> Currency/Quant.fields
Here give the field name GS_LIKP-ZWEIGHWT and in the reference field give some quantity field contained in some internal table that you have passed in the form attributes. Give data type as QUAN.
Activate the Form and execute. This should solve your problem.
Hope this helps!
Regards,
Saurabh

Control 'ctl00_SPWebPartManager1_g_d4fb972b_26ec_4065_9c89_80b51b384492_gvwikireport' of type 'GridView' must be placed inside a form tag with runat=server.

Hi,
I have written code for 'Export To Excel' in the visual web part as below
//ascx file
<table>
<tr>
<td>From Date:</td>
<td><SharePoint:DateTimeControl ID="dtFromDate" runat="server" DateOnly="True" /></td>
</tr>
<tr>
<td>To Date:</td>
<td><SharePoint:DateTimeControl ID="dtToDate" runat="server" DateOnly="True" TimeOnly="False" /></td>
</tr>
<tr>
<td>Report Type:<asp:DropDownList ID="ddlreporttype" runat="server"><asp:ListItem>Consolidated</asp:ListItem><asp:ListItem>Question Wise</asp:ListItem></asp:DropDownList></td>
<td>
<br />
<asp:GridView ID="gvwikireport" runat="server">
</asp:GridView>
</td>
</tr>
<tr>
<td><asp:Button ID="btnExportToExcel" runat="server" Text="Export To Excel" OnClick="btnExportToExcel_Click"/></td>
</tr>
</table>
//cs file
protected void Page_Load(object sender, EventArgs e)
if (!Page.IsPostBack)
BindGridview();
private void BindGridview()
DataTable dt = new DataTable();
dt.Columns.Add("UserId", typeof(Int32));
dt.Columns.Add("UserName", typeof(string));
dt.Columns.Add("Education", typeof(string));
dt.Columns.Add("Location", typeof(string));
dt.Rows.Add(1, "SureshDasari", "B.Tech", "Chennai");
dt.Rows.Add(2, "MadhavSai", "MBA", "Nagpur");
dt.Rows.Add(3, "MaheshDasari", "B.Tech", "Nuzividu");
dt.Rows.Add(4, "Rohini", "MSC", "Chennai");
dt.Rows.Add(5, "Mahendra", "CA", "Guntur");
dt.Rows.Add(6, "Honey", "B.Tech", "Nagpur");
gvwikireport.DataSource = dt;
gvwikireport.DataBind();
protected void btnExportToExcel_Click(object sender, EventArgs e)
Page.Response.ClearContent();
Page.Response.Buffer = true;
Page.Response.AddHeader("content-disposition", string.Format("attachment; filename={0}", "WikiReport.xls"));
Page.Response.ContentType = "application/ms-excel";
StringWriter sw = new StringWriter();
HtmlTextWriter htw = new HtmlTextWriter(sw);
gvwikireport.AllowPaging = false;
BindGridview();
//Change the Header Row back to white color
gvwikireport.HeaderRow.Style.Add("background-color", "#FFFFFF");
//Applying stlye to gridview header cells
for (int i = 0; i < gvwikireport.HeaderRow.Cells.Count; i++)
gvwikireport.HeaderRow.Cells[i].Style.Add("background-color", "#df5015");
gvwikireport.RenderControl(htw);
Page.Response.Write(sw.ToString());
Page.Response.End();
But after clicking the 'Export To Excel' button i am getting the below error
Control 'ctl00_SPWebPartManager1_g_d4fb972b_26ec_4065_9c89_80b51b384492_gvwikireport' of type 'GridView' must be placed inside a form tag with runat=server.
In case if i am modifying the code as below I am getting error as 'page can have only one server tag'.
<form id="frmgrdview" runat="server">
<asp:GridView ID="gvwikireport" runat="server">
</asp:GridView></form>
So please share your ideas/thoughts on the same.
Regards,
Sudheer
Thanks & Regards, Sudheer

Hi,
According to your post, my understanding is that you fail to export to excel.
I create a demo as below, it works well.
<table>
<tr>
<td>
<asp:Label ID="Label1" runat="server" Text="Name"></asp:Label>
</td>
<td>
<asp:TextBox ID="TextBox2" runat="server"></asp:TextBox>
</td>
</tr>
<tr>
<td>
<asp:GridView ID="gvwikireport" runat="server">
</asp:GridView>
</td>
<td>
<br />
<asp:Button ID="btnExportToExcel" runat="server"
onclick="btnExportToExcel_Click" Text="Export to excel" />
</td>
</tr>
</table>
using System;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Data;
using System.IO;
namespace Export_to_Excel.VisualWebPart1
public partial class VisualWebPart1UserControl : UserControl
protected void Page_Load(object sender, EventArgs e)
if (!Page.IsPostBack)
BindGridview();
private void BindGridview()
DataTable dt = new DataTable();
dt.Columns.Add("UserId", typeof(Int32));
dt.Columns.Add("UserName", typeof(string));
dt.Columns.Add("Education", typeof(string));
dt.Columns.Add("Location", typeof(string));
dt.Rows.Add(1, "SureshDasari", "B.Tech", "Chennai");
dt.Rows.Add(2, "MadhavSai", "MBA", "Nagpur");
dt.Rows.Add(3, "MaheshDasari", "B.Tech", "Nuzividu");
dt.Rows.Add(4, "Rohini", "MSC", "Chennai");
dt.Rows.Add(5, "Mahendra", "CA", "Guntur");
dt.Rows.Add(6, "Honey", "B.Tech", "Nagpur");
gvwikireport.DataSource = dt;
gvwikireport.DataBind();
protected void btnExportToExcel_Click(object sender, EventArgs e)
Page.Response.ClearContent();
Page.Response.Buffer = true;
Page.Response.AddHeader("content-disposition", string.Format("attachment; filename={0}", "WikiReport.xls"));
Page.Response.ContentType = "application/Excel";
StringWriter sw = new StringWriter();
HtmlTextWriter htw = new HtmlTextWriter(sw);
gvwikireport.AllowPaging = false;
BindGridview();
//Change the Header Row back to white color
gvwikireport.HeaderRow.Style.Add("background-color", "#FFFFFF");
//Applying stlye to gridview header cells
for (int i = 0; i < gvwikireport.HeaderRow.Cells.Count; i++)
gvwikireport.HeaderRow.Cells[i].Style.Add("background-color", "#df5015");
gvwikireport.RenderControl(htw);
Page.Response.Write(sw.ToString());
Page.Response.End();
The result is as below:
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Can't combine a IRS fillable form pdf with Acrobat XI

In past years I have combined an IRS fillable form pdf with attachments before printing and archiving.
However, this year I contine to get an error message.
Not sure if it is XI vs X or new type of pdf by IRS but I'm a Acrobat relative beginner and need some assist.
Maybe just operator error.
This is the dialog that I keep getting:
Any tips greatly appreciated.
Thank you.

Thank you.
Yes, it is created by Adobe LCD ES 8.2.
I don't see the type of document. Probably staring at me. Sorry.
Can I convert or somehow get around this?
Last year's looks to be the same type of animal but I was using Acrobat X. Would that make a difference?
This beginner, old beginner , appreciates the help.

Contradiction form error in non interactive adobe forms.

HI All,
I am woriking on a non interactive adobe forms generation program in ABAP.
The program uses a variant and generate pdf forms for all the list items on the varient.
Note: I am not using Webdynpro its the normal pdf generation.
The problem I am facing is that when the varient has a list of more records at some point of time it generates the contradiction form error and terminates. if I alter the varient so that the list is minimal then there is no problem with that.
I know that the Contradiction form error occurs when the pdf generation is open and there is another request to open a new form before closing the previous call. but when the varient has minimal data there is no problem with that, my assumption here is the data volume or such which causes the problem.
Does somebody came accross such an issue earlier or if you have a solution approach please do share it with me.
Thanks in Advance.
Sai Krishna.

Total Posts: 366
Total Questions: 110 (59 unresolved)
Forum Points: 2
Why do you ask so much and never answer? You´d better reconsider the questions/ points balance if you want some help from our side.
Otto

Pdf form error

Hello Friends,
I am working on <b>pdf based print form (adobe form)</b> in GTS module. When the activity message gets executed, the form is called.
I am getting two errors when the activity message is executed.
1) <b>Error in PDF document formatting</b>
here is the detailed information about the error message:
Message No. BCS_MEDIUM016
Message Type E (Error)
Message Class BCS_MEDIUM (Texts for BCS Medium for PPF)
Message Number - 016
Problem Class 1 (very important)
2) <b>Exception CX_FP_API occurred</b>
here is the detailed information about the error message
Message No. BCS_MEDIUM017
Message Type E (Error)
Message Class BCS_MEDIUM (Texts for BCS Medium for PPF)
Message Number - 017
Problem Class 1 (very important)
Please help me on how to rectify these errors. Is it the problem with the print form or is there an error with ADS.
If anyone has encountered similar error(s) with <b>sapscript / smartform</b> and knows the solution, please share the same.
Points will be rewarded for useful answers.
Thanks,
Arun.

solved

"NO_RECEIVER_CASE_BE" error with SOAP Sender assigned to a Business Service

Hi all,
we have a strange error with XI3.0
We created a configuration scenario where the initial step is done by a Business System, that uses a SOAP Sender communication channel to send its request. And this works great when testing it with XMLSpy.
But we then needed to shift from a Business System to a Business Service, as the machine sending the SOAP request changed and was not anymore part of the landscape, but elsewhere.
Hence we recreated a SOAP sender which we assigned to this new business service, doing absolutely the same configuration work as for the other soap sender of the former business system.
Yet when testing it through XMLSpy, we everytime get a NO_RECEIVER_CASE_BE error back, stating that "No receiver could be determined". Yet when checking in sxi_cache, receiver determination is clearly there. All the blogs I went into are only refering to Business System for a SOAP sender, so I was wondering if any of you already managed to assign a SOAP sender to a business Service.
Regards,
Cedric

hi,
so you sue SOAP to make a query ? (sync)
or to send the data to XI ? (async)?
if async then make sure
you use <b>Quality of Service</b> other then BE
in your soap adapter channel
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Error with dbms_xslprocessor.clob2file

Hi all!
I am experiencing an error with this command
dbms_xslprocessor.clob2file(v_xml,'DIR','1.xml');
where:
v_xml is a clob ( it is well formed and with data)
DIR is the directory where i want to output the data, it has beeen created with: EXECUTE IMMEDIATE 'create or replace directory DIR ' ||' as ' || '''D:\XMLFILES''';
and i don't have any error in this command
1.xml is the name of the file.
The errors i get when i execute that command are the following:
ORA-29283 invalid file operation
ORA-06512 at "SYS.UTL_FILE" line 451
ORA-29283 invalid file operation
ORA-06512 at "XDB.DBMS_XSlPROCESSOR" line 58
ORA-06512 at "DBA_TEST.PRUEBA_TEST" line 106
ORA-06512 at line 2
thx in advance!!!

Hi, excuse me for taking so long time to respond, but yesterday i had a mayor issue to solve, but now i am again with this problem.
I'm gonna put some more code.
The database is in another location, and i want to write the data in a local drive, so maybe this is important for the code.
I will put the full code so maybe there is something else important here:
CREATE OR REPLACE PROCEDURE DBA_TEST.PRUEBA_TEST AS
v_select VARCHAR2(2000);
v_ctx DBMS_XMLGen.ctxHandle;
v_xml CLOB;
v_more BOOLEAN := TRUE;
xmldoc dbms_xmldom.DOMDocument;
DIR VARCHAR2(200);
v_DIR VARCHAR2(200);
BEGIN
EXECUTE IMMEDIATE 'create or replace directory DIR ' ||' as ' || '''D:\XMLFILES''';
v_DIR := DIR;
v_select := ' select nombre, direccion, dni from clientes where anio = 2009';
v_ctx := DBMS_XMLGen.newContext(v_select);
DBMS_XMLGen.setRowsetTag(v_ctx, 'rec_decla');
DBMS_XMLGen.setRowTag(v_ctx, '');
v_xml := DBMS_XMLGen.GetXML(v_ctx);
DBMS_XMLGen.closeContext(v_ctx);
dbms_xslprocessor.clob2file(v_xml,v_DIR,'1.xml');
DBMS_LOB.FREETEMPORARY(v_xml);
END;
Remeber that the data are in another location, no local, and i need to output these xml in the D:\XMLFILES directory.
I tried to grant permisions
GRANT READ, WRITE ON DIRECTORY TO DBA_USER
, but it said that i can't give permision to itself..
maybe there is another way to write these files witout using:
dbms_xslprocessor.clob2file(v_xml,v_DIR,'1.xml');
but i would like to use it.
Thx all!!!

Form Error with Subtraction?

Similar Messages

Maybe you are looking for