NeeBeans - Form loaded with errors

Using NetBeans 6.00 Windows.
I created a form class extending JPanel and inserted the class in Palette.
public class ObjPrivUser extends javax.swing.JPanel Then, I created a second class extending JPanel, including the first class.
public class GrantsByUser extends javax.swing.JPanel {
private void initComponents() {
objectPrivUser =  new ObjPrivUser(db);
private GUI.Panels.ObjPrivUser objectPrivUser;
...Everything was ok, when I open the second class I can visualize all components. Until yesterday, when I opened the class and receive a message "form loaded with errors".
I recreated both classes, but today the same error has occurred.
Any sugestion?
Xks,
Fornari

Recompile from your source, something is not nice in your file.

Similar Messages

  • Get message "loaded with errors on the target and was closed" but there are no errors in the vi.

    Hi,
    Attached image shows the error message which i receive when I try to run my vi. "vi loaded with errors on the target and was closed" 
    The vi has no errors as far as I can see and hasn't changed since I ran it a few days ago and it functioned fine. other vi's in the project run without any issue.
    Any guidance to find the issue would be greatly appreciated!
    Thanks,
    Conor
    Attachments:
    Labview error.JPG ‏43 KB

    Some tips:
    1. Try to recompile the VI which is "loaded broken" (ctrl+click on Run arrow). Deploy.
    2. Try to recompile this VI and its dependencies (ctrl+shift+click on Run arrow). Deploy.
    3. Try to recompile top-level VI and its dependencies. Deploy.
    4. Change something in "loaded broken" VI (add some code, like reversing array back and forth, just to make LV recompile it). Deploy.
    5. Close the project. Restart RIO. Open project. Deploy.
    6. Close LabVIEW. Restart computer. Restart RIO. Open project. Deploy.
    7. Take another computer. Deploy from it.
    8. Close project. Clear compiled object cache (menu Tools -> Advanced -> Clear compiled object cache...). Open project. Wait until LV will open/recompile it. Deploy.
    9. Do as 7, but in the meantime reformat RIO from MAX. Open project. Deploy.
    10. Contact NI Support. Send them your project. Make them Deploy it.
    The fun starts when you have project which deploys for 30 minutes... Usually I skip straight to step 8 then, and usually it helps.

  • Page opening hangs ,and loads with errors

    page opening hangs ,and loads with errors,
    terry.

    Terry,
    You need to be much more descriptive when posting. We have no idea what "page" you are referring to.

  • .vi loaded with errors on the target and was closed

    When I intend to run my RT (communicating with an FPGA on a cRIO) it only runs one time. The second trial leads to the following error:
    NI_AALBase.lvlibine Wave.vi loaded with errors on the target and was closed.
    LabVIEW:  Failed to load shared library lvanlys.*ineWaveCIN:C on RT target device.
    After reseting the FPGA and Labview it runs again, but also only for one time.
    Thanks for solutions!
    Thomas Vogl

    Error 'found'.
    Process (one day working on it!):
    1- 'Disabled' .vi cutting it into small pieces.
    2- Locate code that provokes 'not defined error' by enabling and running.
    3- Finally located.
    My case:
    I've designed a communication system. To send data uses a PDU containing a 'variant' and 'ring'. This ring indicates type of data to convert variant with necessary typedef. The system defines 4 default msgs on ring (NULL, ACK, NACK, PING).
    The receptor works well, but as I have a lot of data types, I need a case structure. (rings do not work with case at least on 2011) Then I do next thing:
    Explicit cast to a typedef enum with all my data values... (This system is designed for our purposes and could not be the better solution)
    ... UNDEFINED ERROR ON PXI ...
    Solution:
    Instead using explicit typecast use "coercion dot" casting. Like here.
    I receive an U16 data that PXI cast to my enum on 'data out' indicator (you can't see coercion dot because pink and red are 'very different' colors)
    No more errors.
    Conclusions:
    Labview has issues working with explicit type-casting to enums. I can't work more on it, but is necessary to debug this kind of issues because can affect projects at last steps of the development and drives LVdevelopers crazy.
    The only think I do with the enumeration is to add new element and all the system fails...
    Thank you for your reply Schmitz!
    I hope that this information could help somebody that in the future needs to investigate how LV works... xD
    Probably this is not the only issue related with ".vi loaded with errors on the target" (known as the "well defined error").
    Cheers

  • Hierarchy from flat file loading with errors - duplicate node names

    Hello experts,
    I am loading a product hierarchy from a flat file into a custom hierarchy
    object.  The issue is that it errors out saying I am loading
    duplicates within nodes, however all node IDs within a level are unique.
    It seems to be looking at the node name to determine uniqueness and I know
    we have some duplication within the text there especially when you factor
    in the 32 character limitation for the node name.  Does anyone have an idea
    as to whether it is possible to have it only consider the node ID instead
    of the node name to determine uniqueness?
    A colleague suggested using the link ID to fix this problem but I don't know how that field works or how to populate it.
    I'm working in a BI 7.0 environment (I don't know if that makes a difference since you still have to use the 3.x objects to extract the hierarchy).
    Any help would be appreciated.
    Nancy

    Hi Nancy,
    You may wish to check this OSS Note 1026749 - Hierarchies: Consistency check for duplicate nodes and 912115 (old one)
    Symptom -
    When you load or activate a hierarchy it terminates with error message RH 109 or RH 211. The hierarchy contains duplicate nodes and this is not allowed. The long texts of messages RH 109 or RH 211 do not describe the reason for the problem sufficiently or they are partially incorrect.
    There is uncertainty about in which cases duplicate nodes exist in a hierarchy and in which cases duplicate nodes are allowed.
    Hope this helps,
    Bye...
    Naga Timmaraju

  • 10g Forms Builder with error "cannot attach library" opening R12 fmb file

    Hi all,
    I had set up my Forms Builder with all the necessary PLL and FMB files for developing R12 custom forms. I have used the builder to do few custom PLLs and one custom form, and I did not have any problem opening seeded Oracle Forms. Today when I need to enhance that custom form I did 2 weeks ago and I opened Forms Builder, I got the error "Cannot attach library.." for APPCORE, APPDAYPK, etc.. Same error for opening TEMPLATE.fmb.
    I have done these to troubleshoot:
    1) I verified my Windows XP registry "FORMS_PATH" to include the folder where I store all the PLLs and FMBs.
    2) I updated default.env to include that file path.
    3) I create shortcut to Forms Builder and put folder path with PLLs under the "Start in" field of the shortcut.
    4) I rebooted my machine after changing the registry
    5) I moved the folder with PLLs to under C:; I seperate PLL to "resource" sub-folder and FMB to forms/US/ sub-folder just like the server structure.
    6) I install one more copy of Developer 10G Suite and set up the registry.
    None of these work and the key is it used to work with no issue. Any suggestions what may be the problems?
    Thanks!
    Mike.

    Turned out I reloaded all the $AU_TOP forms and PLLs to my desktop and it worked fine. I think I did not FTP correctly the first time.

  • Safari extremely slow and pages load with errors

    Not sure if this is related to other Safari posts, but when I try to load a page from many sites, including this one, the speed is extremely slow and there are invariably errors reported on the bottom status bar. I'm on a new Mac Pro, and I haven't added any add-ons to Safari or changed system settings. My internet connection is DSL on ethernet, and there are no problems with email or on my old G4 using Explorer 5.1. At this point G4's Explorer is light years faster than Safari on this machine. I'm going to try Mozilla Firefox, but is there any hope for Safari?
    Thanks,
    Peggy

    Hi Peggy
    Welcome to Apple Discussions
    Try this to speed up Safari.
    First, make sure you are not using Rosetta. Go to Safari's info panel (Application folder>Safari.app>Single click>Apple Key I). If Rosetta is selected, uncheck it.
    Network Connection
    Go to the System Preferences>Network panel
    - Location - set up a personal location by clicking on the drop down menu and selecting "add a location". Use a name familiar to you. Once established, select "apply".
    - Next, click on the "Show" drop down menu and select Network Port Configurations. Only Ethernet ought to be checked. Move it to the top of the list (you can drag it). Select "apply".
    - Back to the "Show" menu, depending on your connection select "Ethernet". Click on the TCP panel. There, enter 4.2.2.1 and 4.2.2.2 (separate lines) in the DNS servers box and select "apply".
    Creating a personal location, plus adding the DNS codes seems to speed things up. Otherwise, the "automatic" function has a tendency to "search" for available locations.
    In the Finder, go to your Utilities folder and select "Terminal". Once the screen is open enter lookupd -flushcache and press return. This clears out the DNS cache. Once done, quit Terminal.
    Post back

  • Images won't load or they load with errors.

    I bought a new pc a couple of weeks ago, since then images won't load properly or simply won't load. Most of the time it happens with images hosted on imgur.com but happened a couple of times with other hosts too.
    It seems to be a Firefox problem, because images are well displayed on Chrome & IE. Also it's odd because sometimes I cannot see an image, but if I try a few hours later I can view them perfectly.
    A few examples, the originals and how I see them:
    <pre>
    http://i.imgur.com/fgxY56P.jpg
    http://i.imgur.com/5r5ELRN.png
    http://i.imgur.com/JWsLLTu.jpg
    http://i.imgur.com/b8FNb1N.png
    http://i.imgur.com/SIIfgVc.jpg
    http://i.imgur.com/wo2FbUT.png
    http://imgur.com/gallery/3ULJn
    http://i.imgur.com/e3pta66.gif</pre>
    I tried disabling all addons, but I still got errors. I'm using Firefox 28.0 on Win7 Ultimate SP1 x64.
    Excuse my poor english and thanks in advance.

    Resetting Firefox seemed to be the only solution, worked fine.
    Thanks for your help Aman : )

  • Apache2 Loads With Errors

    I have a new install of SLES10sp2 OES2SP1.
    I was able to unload and load Apache2 yesterday.
    Today I receive the following error when I run the command rcapache2 start:
    httpd2-worker: Syntax error on line 113 of /etc/apache2/httpd.conf: Syntax error on line 27 of /etc/apache2/sysconfig.d/loadmodule.conf: Cannot load /usr/lib/apache2-worker/mod_proxy_connect.so into server: /usr/lib/apache2-worker/mod_proxy_connect.so: undefined symbol: ap_proxyerror
    I have looked at both of these files. There does not appear to be any syntax errors. Also all modules are in the /usr/lib/apache2-worker directory.
    I am able to get to NRM on port 8008 and 8009 and the DHost HTTP Server on port 8030.
    I have not patched anything. However our backup team did install Data Protector.
    Is this fixable or should I just reinstall Apache.

    Originally Posted by kbannister
    I have a new install of SLES10sp2 OES2SP1.
    I was able to unload and load Apache2 yesterday.
    Today I receive the following error when I run the command rcapache2 start:
    httpd2-worker: Syntax error on line 113 of /etc/apache2/httpd.conf: Syntax error on line 27 of /etc/apache2/sysconfig.d/loadmodule.conf: Cannot load /usr/lib/apache2-worker/mod_proxy_connect.so into server: /usr/lib/apache2-worker/mod_proxy_connect.so: undefined symbol: ap_proxyerror
    I have looked at both of these files. There does not appear to be any syntax errors. Also all modules are in the /usr/lib/apache2-worker directory.
    I am able to get to NRM on port 8008 and 8009 and the DHost HTTP Server on port 8030.
    I have not patched anything. However our backup team did install Data Protector.
    Is this fixable or should I just reinstall Apache.
    check the modules you are loading. With apache2.2 there are some modules that have to be loaded before others. Had the same problem try adding basic proxy first (not sure the exact module name) and if that still doesn't work add proxy_balance.
    Hope that helps.

  • EIS outline load with error 1130203

    Hi, All
    Help me please with this trouble:
    We use Essbase Integration Services 9.3.1 , data source is Oracle DB. One of the base dimension include about 1000000 members , and on this base dimension we need to use 15 attribute dimension. When I try to load outline, always have error “Analytic Services Error Number 1130203.Failed to save outline” But if I decrease number of source member to about 600000 – all right, cube is loaded. All recommendation which I find in document “Essbase error messages references” are checked and all source data is correct.
    OS – Windows 2003 SE
    RAM – 3 GB
    Thanks

    If you wish to compact/restructure the outline, you could refer the Thread: Can't update and save the ASO outline because of error 1130203
    GlennS has suggested to compact the outline,
    Go into EAS and right click on the outline and select compact. I think it really only started to work properly in 9.3.1.2
    I have suggested the way to resize the outline in the same thread, just see if it helps.
    1..Create an new application and database xx and add the Dimensions. Lets consider the Outline size to be 736KB (xx.otl)(This is considered to be template outline.)
    2.Take the back up of the Template outline.
    3.Run the application.
    4.During the first refresh,the outline size will be minimum, say 180 MB (xx.otl)
    5.During next refresh the outline size will increase to 350 MB. In order to avoid this increase in outline size, we have to stop the application and replace the current Outline file with Template Outline before refreshing.
    6.Start the Application. Now the Outline size is only 736KB
    7. After the cube refresh, the outline size become 180 MB.
    8.Follow the same procedure for further refresh , then Outline file size will not exceed 180 MB.

  • Won't load with error 2738

    iTunes will not update because of error 2738. It also said something about quicktime not updating or loading either. I am about to recieve and iPhone and it will not sync with my version of iTunes, so I need help!
    Windows Vista   Windows Vista  

    same problem. tries to install, gives the same error code (with no explanation) for both quicktime and 7.3. then takes me back to the install prompt after telling me the install could not be completed. I have Vista Home Premium, which I knew had issues with some software, but this is ridiculous. Apple even made me create a whole profile just to get into these discussions and get help so I could use my shiney new iPod I got for a gift. great customer service. thanks, Apple, for your wonderful systems.

  • Logic Pro 9 will not load with error message MINOR PROBLEM IN DATA (3)

    Logic 9 will not load for me. I am using version 9.3 and have not changed anything on my setup.
    It just crashes and will not repair issue. Any help would be appreciated.

    How is this drive formatted? What's on it? How are you opening Logic: by doubleclicking the app or by doubleclicking a project? What project was it supposed to open? have you tried starting Logic by doubleclicking a different project?

  • IMAQ setup pattern matching 2 loaded with errors on the target and was closed

    Hi , guys. has any of you nice people ever seen something like that ... in deployment progress?
    labview 2010
    sbRIO -9631
    Thanks in advance.
    Attachments:
    deployment progress.jpg ‏43 KB

    Hi, Oli
    thanks for your help. I re-installed the IMAQ software, it seems working.
    but i have some similar errors now, and i dont know which module i should re-install, could you tell me where the problem is, please.
    the name of which module would be great.
    thanks a lot.
    Attachments:
    0.jpg ‏55 KB
    1.jpg ‏52 KB
    2.jpg ‏52 KB

  • Logs loaded with errors from WLC 4404

    I get pages and pages of these in my syslog... yet everything appears to be wrong.. what gives?Nov 26 01:44:42.102 dtl_pdu_landd.c:400 DTL-3-PKT_TX_ERROR: Failed to transmit a packet of type 2,USP:291897344/288555008/288555008.
    Thanks!

    IDS Disassociation Flood attacks against valid clients are sometimes reported where the attacker's MAC address is that of an AP joined to that controller.
    When a client is associated to the AP but stops communicating because of card removal, roaming out of range, etc. to the AP, the AP will wait until the idle timeout. Once the idle timeout is reached, the AP sends that client a disassociate frame. When the client does not acknowledge the disassociate frame, the AP retransmits the frame numerous times (around 60 frames). The IDS subsystem of the controller hears these retransmits and alerts with this message.
    This bug is resolved in version 4.0.217.0. Upgrade your Controller version to this version in order to overcome this alert message against valid clients and APs.

  • Delta Loads failling after system copy with error in source system(RSM340)

    Hi Guru's
    We recently performed system copy in BI side.I am facing same issue in couple of chains.Process chains are failing at delta loads with error in source system(ERROR IN SOURCE SYSTEM-message no-RSM340 ).When I go for repeat option ,delta loads are running fine.I did some research regarding RSM340 and I found note:1576331.
    But my system is not showing any 'Time Inconsistencies'.So.I was not able to find any clue about it.
    Could anybody help  me out in this aspect.
    Thanks!!!
    Kuldeep

    Hi,
    Check whether the profiles that ran in background have the following authorizations.
      The RFC user on BW, receiving data from OLTP system, should have  S_BI-WHM_RFC and S_RS_ALL in the user profile.
    The RFC user on OLTP, receiving request from BW system, should have  S_BI-WX_RFC, S_IDOC_ALL, and, B_ALE_ALL in the user profile.
    Regards .

Maybe you are looking for

  • JSSE Performance 1.3.1 v. 1.4.1

    We are in the process of moving an application that uses JSSE SSL sockets from 1.3.1 to 1.4.1. It seems that socket creation time went through the roof by just switching the JDK's: Running on a LAN, in 1.3.1, after the initial socket, it takes <50ms

  • Backup 3 freezes at "Pending . . ."

    After using Backup 3.1.2 successfully for months, now when I try to back up Personal Data & Settings to my iDisk, the process appears to start, but never leaves a state that says "Pending. . ." Same issue if I try to back up Purchased Music to the iD

  • Audio output issue in Adobe Acrobat

    We have embedded .mp3 file in Adobe Acrobat XI Pro trial version. We tested in various versions of Adobe Reader in Windows and Mac. The audio is playing fine. But as per our client the audio does not work for her. She is using Windows 8. We could not

  • How to create a product in Standalone CRM System?

    Hi All, I am new to SAP-CRM and I got a problem while creating a product (without downloading from R/3) using hierarchies. First I  created attributes, set types and assigned to categories and hierarchies. After this step when I tried to create a pro

  • Can anyone recommend software for graphic project management?

    I am a graphic designer who has to juggle multiple projects in various stages and am wondering if there is a software for my new Mac Pro that can help with this type of usage.