Form language for dunning

I use the copy of F150_DUNN_01 for dunning printout.
Is there any variable I can use to determine the language of the form?
I believe it's coming from the communication language of the customer, so I could get in a PERFORM myself, but I'm sure it's available as a variable, however I cannot find it.
It seems the print is triggered by FM PRINT_DUNNING_NOTICE.
Thanks in advance,
Peter

Hi Tomasz,
Thanks for your answer.
It seems for both FM there is an import parameter LANGUAGE, however in case od OPEN_FORM it's still the logon langauge, however for START_FORM it's already correct.
I still couldn't find if this parameter is passed to the SAPScript. In the ABAP debugger LANGUAGE and 'rstxc-tdspras' is filled with the correct language, however in the FORM Debugger, there is no value assigned to these parameters.
If I change from the FORM debugger to ABAP debugger, the value is shown correctly for rstxc-tdspras.
I think I'll get it from the customer master with a PERFORM, it's easier.
Thanks,
Peter

Similar Messages

Overlapping characters displayed in spool for dunning in thai language

Hi Experts,
Our requirement is to create a dunning form for Thailand(displayed in thai language).
We have created a thai oriented printer(Thl1).We have also created a smart style and the font is helvetica(in order to display thai characters).
We have a problem when the spool is generated.The characters in the spool(both english and thai) appear overlapped.
What can be the reason for this?
My hunch is that since we are using helvetica font the spool is not generated properly.(ie spool cannot take helvetica font)
Since dunning is a sap standard program we cannot directly convert to otf format instead of generating a spool.
This problem has been bugging us for a long time.
Can any of the sap mates please suggest a solution for this?

This is a duplicate of
Link : [Overlapping characters displayed in spool for dunning in thai language]

Issue with Customize program for Dunning Forms

Hi Experts
I have write a perform for dunning form in a outside report apart from standard print program. After doing some calculations I want print some information in the form using the function module "Write_Form", but I am not able write on the form.
Please advise me is there any other settings are additional details are required to print the custome lines in the dunning form. Dunning form also customized in this scenario.
Awaiting for your reply
Thanks
Praveen

Hi Shakeel
Thanks for your help, I am using Write_Form only, but not able to write the statements in the Form.
Let me explain my code here.
1. I wrote the perform in the SAP Script under a text element.
2. In that perform(in the program) I am calling other text elements, where I have to write the statements.
But I dont know, what is the problem here, when I debug the Write_Form FM, in the very first statement itself, it is becoming false and coming out from the whole process. That statement is
check co_perform-active <> true.
Please advise me, am I doing anything wrong or is there any other process to fullfill it.
Thanks
Praveen

SAPSCRIPT: Creating new Language for existing form

Hi Guys,
I need add an additional language for an existing form. Italian is not available for the this existing form. How can I add this language? do I need to copy the form with language EN? how can I include that form in the existing form? or there are other way to do this? Thanks in advance!
Regards,
Michael Nacionales

There is a change in the standard code.The reason for the above problem was because of a missing Enhancemnet point in a standard function module 'CV110_DOC_CREATE_WITH_TEMPLATE'.
IS-ADEC-MPD - Enhancement to copy MPD data
ENHANCEMENT-POINT CV110_DOC_CREATE_WTEMPL_01 SPOTS ES_SAPLCV110.
+*$*$-Start: CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
+**ENHANCEMENT 1 ZSF_AD_MPD_SAPLCV110.    "active version**+
+*** copy MPD relevant data from templ. doc to current doc**+
+**CALL FUNCTION 'MPD02_COPY_MPD_DATA'**+
    +**EXPORTING**+
      +**is_draw = ls_draw**+
    +**TABLES**+
      +**ct_drad = lt_drad.**+
+*ENDENHANCEMENT.**$*$-End:   CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
Created a custom enhancement point similar to SAP ECC6.0 EHP 3.0 system.
The reason was the buffer was not getting cleared previously.After inserting the above code the DIR's are getting created withot any issues.
Regards,
Prasad.B

Specifiying Language for Document Properties if PDF Form

In order for a pdf to be 508 compliant it's language must be specified. I've created a form and for the life of me can't figure out how to specify the language for this document such that Adobe Reader knows it's english. In a pdf NOT created using lifecyle this would be easy. simply go to file > properties> advanced > Language > english. but in pdf forms that section of the properties is greyed out. I tried adding it to the xml like this:<br /> <text name="Language">English</text> in the <desc> tag. Please if you have ANY suggestions they'd be much appreciated.

I wonder if you have seen the form being filled, or a screen shot, so can confirm that Adobe Reader is the app when it is filled? (And not Adobe Reader Touch or a browser or Microsoft Reader or any other app). The reason for asking is that many users (not unreasonably but wrongly) assume that once Adobe Reader is installed it is bound to be used.

Use Adobe forms for Dunning letters

Dear All,
We have a requirement to use dunning letters using Adobe Forms. I would like to know,
1. Is there a way we can attach adobe forms for dunning letters.
2. what could be the estimate do develop these letters using adobe forms.
3. Could I get some guidelines on the approach.
Thanks.

Hi Jonathan,
You're right, PDF is easier to use in comparison to SapScript.
If the SapScript is in use at this time, you should have no worries with PDF, where you can even import the official format.
Regards,
Francois

Report for Dunning

Hi Experts,
Any one has written report for Dunning.(F150)
Scenario: transcation code F150 can't be schedule; it's runs manually by users.
we need a report same as what F150 is doing so that we can schedule in job.
if any one knows report for dunning ? I know fot he payment F110, there is a sap report progarm but not for Dunning(F150).
Can anybody suggest me ??
Thanks in advnace for the help.
Regards,
Nupur

Hi Hemanth,
Customizing:
You can go the Transaction FBMP and add your Form name as well as the Print Program name.
These would be call when ever you run the dunning Program.
From the Layoutset yuo can use the PERFORM subroutine using and changing parameters which would have the Structure ITCSY.
The Form then needs to be present in the Driover Prpgram.
Please let me know if this is useful.
Regards,
Deepak

How do I change the default language for the spell checker? - solved, sort of...

As the previous thread was closed without actual resolution - https://support.mozilla.org/en-US/questions/941350?esab=a&s=&r=0&as=s
I managed to solve this on my end by just reinstalling firefox using the localisation of the default dictionary language i wanted from here - http://www.mozilla.org/en-US/firefox/all/
A bit of a shame that the main download page doesnt select the geographically relevant localisation for you and even more so that changing the default language for the in built spell checker is so kak. oh well.

Right-click a web form on any web page.
Languages > Add Dictionaries
*Install the Language pack
You can look here for dictionaries:
* http://addons.mozilla.org/firefox/language-tools/
* http://kb.mozillazine.org/Spell_checking
*http://kb.mozillazine.org/Dictionaries
*http://support.mozilla.org/kb/Using+the+spell+checker
Right-click a web form on any web page.
Languages > Add Dictionaries
*Install the Language pack

Purchasing Contract output - form language determination

First, here's a shot outlook on the situation:
The customer created a vendor master, with the communication language German. He then created a contract with that vendor and tried to print it, but the output form came out in German. I checked the message in the contract, and the language was RO, not DE.
The customer then changed the communication language in the vendor master from german to romanian; then he deleted the message in the contract and recreated it, but the language for the form is still german. He told me that when he tries to recreate the message, the default language is still DE and he changes it to RO.
Please tell me why the language is still defaulted to DE. I checked in customizing & the vendor master and I can't find the DE language anywhere.
Thankyou in advance,
Cosmin

HI,
What is the log in language for the user?.
Usually when u need to print PO in different languages two output types are created one for each language .Check in previous what output type is used for german & RO..
DID u check in this node
MM>PUR>MESSAGES>OUTPUTCONTROL>MESSAGE TYPES>DEFINE MESSAGE TYPES FOR PO
Double click on first,select NEU,THEN CLICK ON SEE THE DEFAULT LANGAUAGE.
MURUGAN
Edited by: Murugan mgl on Aug 6, 2009 2:41 PM

Can we get a output in different languages for the same configuration

Hi All,
Can we get a output in different languages for the same configuration done in NACE. or it is language specific.
They have symbols which have values both in german and english. But when we run the transaction we are getting the output only in german language.We want the out put in english
language.
Thanks in Advance.
Rajesh

A Smartform can be maintained in many languages other than the language that it is created. Translations for the texts have to be maintained for this purpose.
To maintain the translations:
Go to transaction SE63 in R/3.
Go to menu Translation->R/3 Enterprise->Other Long Texts
Select the object type in the pop up. Smartform(SSF) object type is found under Forms and Styles(FS).
Enter the name of the Smart form and choose the source and target language. This would open a screen with the Smartform code in Source language on the top and an editor with the same code in the bottom.
Find the text for which you need to maintain the translation and insert the translation in that place. As usual after required texts are maintained Save and Activate.
To see the translated Smartform create an output type and assign the smartform and the driver program to this output type. In the transaction that sends output to this smartform, select the output type and select the language in which the smartform has to be displayed (translations have to be maintained in this lanuage).This will give the smartform in the required language.
Madhavi

Script or smartform for Dunning Letter????

Hi All, I have to develop a SF for Dunning Letter. When I checked in standard Program for Dunning Letter printing, there SSF FM.... But my doubt is can we go for Smartforms??? When I checked in the customization, there is a SF for dunnig letter.. but they didnot use it... So Kindly answer me...

Hi Jyothsna,
Do we need to write Z driver program?
You donot nee dto write a a driver program.There is a standar program that calls the smartform.if you have to make chnages in it for your requirment, you can just copy this into a z program and change it.
-- If Yes, where to assign program??
SPRO -> fin accounting -> acc recv & payables -> business transaction -> dunning -> printout -> Assign dunning Form.
-- Cant we go for the Standard prog as it also has the SSF FM??
as i mentioned above, yes you have to use the standard program. Only thing if you intend to make changes in program then you will have to copy it to a z program.

Where to assign zprogram to zform for dunning letters

Hi All,
I have created a new z print program and z sapscript for dunning letters(FI).
Where can i assign my custom program so that it is used for printing the dunning z forms. In SPRO where do we maintain this configuration.
Thanks,
Abhishek

hi Abhishek,
you need to configure this in IMG; follow the instructions mentioned below:
1->Goto SPRO->SAP reference IMG
2->navigate to FINANCIAL ACCOUNTING (new) ->ACCOUNTS RECEIVABLE AND ACCOUNTS PAYABLE ->BUSINESS TRANSACTIONS->DUNNING
3->Expand the node PRINTOUT and execute ASSIGN DUNNING FORMS.
Here you define the SAP SCRIPT form created for the purpose. Save the configurations.
4-> Go to the SAPSCRIPT editor, in change mode for the newly created form.
5-> choose any of the window, press F9, to go to the text editor.
6-> choose any of the text symbols used, and navigate to GOTO->PRINT PROGRAM->SYMBOL DEFINITION.
7-> in the new screen, click the button, APPEND PRINT PROGRAM
8-> Now enter the new ZPROGRAM created, save .......thats it....
Hope this helps,
Sajan Joseph.

Language for Premiere Elements, for MAC

Hello,
What's the reason for doesn't launch Adobe Elements for MAC (last version = 12) in spanish language?
Thanks

tutan25
Some purchased Adobe Premiere Elements Editor or Adobe Premiere Elements Quick Editor from the Mac App store instead of Premiere Elements Mac from Adobe.
I checked online regarding the Mac App store and their Premiere Elements offered...
http://helpx.adobe.com/photoshop-elements/kb/purchases-mac-app-store-faq.html
looks like last date on document is around May of 2013.
Note that even there
Spanish is not an included language for "Photoshop or Adobe Premiere Elements".
Curious.
I suspect only Adobe has the answer for no Spanish version of the product. You could contact Adobe via Adobe Chat to determine what workaround, if any, exists for those wanting a Spanish version of the product.
http://helpx.adobe.com/contact.html?product=premiere-elements&topic=orders-refunds-and-exc hanges
If you want to contact Adobe via its Adobe Chat regarding this matter, please click on the link above, and, when it opens, click on the statement "I still need help" to bring up the Adobe Chat. The Adobe Chat the "Orders" part of the category of "Orders, Refunds, and Exchanges" is probably a good start.
Please let us know the outcome.
Thank you.
ATR
Add On...Depending on the result of your contact with Adobe Chat, you may want to file an Adobe Feature Request/Bug Report Form on the matter.
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&product=12

Where to set sending of e-mails for dunning documents

Hello
Does anyone knows where to set sending of e-mails for dunning documents. They are being printed out but e-mail is not being sent.
Generalyy e-mail sending(trx scot) is set.
I guess it is pure Fi settinng to send e-mail as well. Could anyoune help
Thank you a lot in advance
Jan

Hi Jan,
Please refer SAP note
1042992 - Dunning by mail w/ SAPscript: Introductory text w/ attachmnt
Also refer SCN document
SAP FI Dunning Procedure customization and Functionality
Refer section
Activate the dunning via E-mail (To receive letter by mail)
Dunning letter output can be in two forms.
1)        Email
Manual Print out
H         Hope this helps.
              Regards,
             Deepak Kori

Database storage of multiple languages for name of a single entity

Surely I'm not the first person to have this problem, but I can't find many resources on how to solve this. Just some background on what I'm working with, I'm running a web application using the Struts framework with jdk 1.4 on a Weblogic 8.1 server connected to an Oracle 9i database, I'm using DAO for my persistence layer, and I'm not opposed to using any 3rd party software to assist in this task.
For example, say I have a database of DVDs, My application will retrieve the list of DVDs from the database to display to the user. Depending on the user's Locale I want to display the title of the DVD in that language.
This is a simple example, but the real-world application is much more complicated. The application is highly configurable meaning that through a configuration application, my internal users can add DVDs at any time, edit the title of the DVD, or add a new language that they want the title to display in, etc. When a customer logs in to the application front-end they will be able to change the language they want the application to display in at any time, and the application will need to reflect that change. The display of constant text like field labels and page text is easy using Struts but its this configurable dynamic text thats a bit more difficult.
Its obvious to me that I will need to store the multiple languages in the database in some way, I'm thinking of either storage in some xml format, or a new table hanging off the "dvd" table with languages for each dvd. Either of these options would work for my purposes, but I don't want to go reinvent the wheel when this same problem has arleady been solved. If someone could point me in the right direction I would appreciate it

One common way to handle this is to modify your key for the dvd title to include a locale identifier:
key dvdtitle
becomes
key locale dvdtitle
Now your db can hold multiple translations of the same dvd title.
Regards,
John O'Conner
Its obvious to me that I will need to store the
multiple languages in the database in some way, I'm
thinking of either storage in some xml format, or a
new table hanging off the "dvd" table with languages
for each dvd. Either of these options would work for
my purposes, but I don't want to go reinvent the
wheel when this same problem has arleady been solved.
If someone could point me in the right direction I
I would appreciate it

Form language for dunning

Similar Messages

Maybe you are looking for