Form Needs To Be Maintained

I am running a program to print dunning letters. When the job executes I get the following message...
Form ZF150_DUNN_01 for vendor 0006334804 2713 is not maintained in language E
The dunning letter prints, but it is formatted incorrectly. Looks like a jumble of field names and values. Where can I find this form in the system to maintain it?
Thanks - point will be rewarded.

HI,
In Transaction code SE71, Look at the form ZF150_DUNN_01, if it is not maintained in EN language, then copy the same layout in EN language
Regards
Sudheer

Similar Messages

  • Do Workspace ES PDF Forms need to be extended?

    Hello experts,
    I have a pressing question for you all.
    We have Adobe LiveCycle ES installed and have developed some processes. But we are facing some problems lately with our PDF with WDSL call embedded in. The problem is that the web service button does work after you click it. So I was wondering whether the form needs extension or not?
    If it does not what can we do to make it work with Adobe reader X?
    Thank you.

    Thank you Chuck for your reply.
    Now the interesting part of my issue is that on one PC the Form works fine in the Workspace environment, but on most of the computers it does not. I wonder how to set the environment so that the form can work on the other computers? All the computers do have the same version of browser IE8 and Firefox 4.0.
    Thank you in advance for your assistance.

  • Hi, i am new to PDF forms & need to make drop down menu with pictures, how do i do that ?

    Hi, i am new to PDF forms & need to make drop down menu with pictures, how do i do that ?
    some one suggested to use coding to achieve similar results,  but i don't know where and how to use it, please help!

    Sorry, images in drop downs are not supported by Formscentral.
    Andrew

  • What type of form need to be using to get Display tab on the Section Properties of my Optional Section?

    What type of form need to be  using to get Display tab on the Section Properties of my Optional Section?
    CRISTINA&amp MICROSOFT Forum

    Hi perezco,
    Are you using SharePoint?
    Please provide more information and screenshots about this issue.
    Thanks,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • Material form Packed, Loose is maintained for RG1 Register----where?

    Pls Suggest me to solve the problem. I want to know where the material form is maintained. P for packed, L for Loose. In RG1 register for Packed material everything is getting reflected in RG1 Register. Whereas for loose material opening balance, Total of opening and manufacture & Closing balance are not getting reflacted in Rg1 register.
    I have checked till the date all production & issue are there in J_1IRG1 table after J1I5. After extracting the thru J2I5 only packed material is getting updated in J_2IRG1BAL table. But not the loose or unspecified material. However my clients need to get packed as well as loose material in RG1 register.
    Manually in development client i changed the Losse or unspecified material as Packed by direct table entry in J_1IRG1 for testing. After doing the same when i extract the data thru J2I5, everything is coming in J_2IRG1BAL table. And getting reflected in RG1 register.
    Now I have to change the Loose material as Packed material. So my problem will be solved. That is my objective.
    Pls tell me how to do the change. Is any config setting or assignment?
    Its urgent.
    NB: helpfull answer will be awarded.
    Regards
    Srimanta
    Edited by: Srimanta De on Jun 25, 2008 11:46 AM

    Srimanta,
    for better and quick reply post this thread in MM section.
    Amit.

  • Free goods procured needs to be maintained as valuated goods in inventory

    Dear All,
    Here the scenario is, the company procures the material free of cost from the vendor, but they need to maintain the material in inventory in the same value as they mentioned in the material master.
    But if i check in T code MB52, after making the free goods receipt of the material, the  value is zero. Pls suggest how to configure so that free goods remains valuated in inventory.
    Rgds,
    Raghavendra N N

    Hi,
    For the valuation of the materials delivered free of charge, you must note which price control has been defined in the material master record.
    1. MAP :-  If the material is valuated at moving average price, the stock figure is updated on a quantity basis only, not on a value basis. Thus the total stock quantity increases but the total value of the stock remains unchanged. This results in a reduction in the moving average price.
    2. STD :-  If the material is valuated at standard price, the stock figure is updated on a quantity and a value basis. The receipt is valuated on the basis of the standard price. The offsetting posting to the stock account posting is made to a revenue account for price differences.
    So, Value comes only with Std Price control...but it will go to price Difference Acct.
    Regards,
    Pardeep Malik

  • Free article procured needs to be maintained as valuted goods in inventory

    Dear All,
    Here the scenario is, the company procures the article free of cost from the vendor, but they need to maintain the article in inventory in the same value as they mentioned in the artcle master.
    But if i check in T code MB52, after making the free goods receipt of the article, the  value is zero. Pls suggest how to configure so that free goods remains valuated in inventory.
    Rgds,
    Raghavendra N N

    Hi,
    For the valuation of the materials delivered free of charge, you must note which price control has been defined in the material master record.
    1. MAP :-  If the material is valuated at moving average price, the stock figure is updated on a quantity basis only, not on a value basis. Thus the total stock quantity increases but the total value of the stock remains unchanged. This results in a reduction in the moving average price.
    2. STD :-  If the material is valuated at standard price, the stock figure is updated on a quantity and a value basis. The receipt is valuated on the basis of the standard price. The offsetting posting to the stock account posting is made to a revenue account for price differences.
    So, Value comes only with Std Price control...but it will go to price Difference Acct.
    Regards,
    Pardeep Malik

  • Fields need to be maintained in Sales order

    Hi gurus,
           I wan to maintain two fields in sales order, one is agent(middlemen who facilitate sales) and companies sales representative fields for 3 respresentatives. Anyway these two were defined in Partner functions and assigned to account group. I want these  person names to display in sales order since these persons will get commission on their sales. And also pls let me know how to assign commission amount to theim , do i need to create any seperate G/L account.
    (I will create condition type to maintain condition records for each sales representative and agent seperately)
    waiting for reply, pls help
    Regards

    To have these partners show up on the sales order, you need to assign them to the sales order header partner determination routine.
    You can use an accrual condition to compute and account for a commission. If you have different rates for different sales reps, you will probably need to add the partners to the SD pricing communication structure - which requires a little bit of ABAP coding.
    In terms of needing a different G/L account for commissions payable: in all likelihood you will. However, this is normally an accounting policy decision.

  • Auto-populate of SHELL_shellName_shell Upper form DE only functions in one single-instance project shell.  The DE in the BP Upper Form needs to auto-populate in two separate single-instance shells.  How can I get this DE to autopopulate in both?

      The Unifier environment
    contains two single-instance project shells, INF and PBS, and two multiple-instance child project shells, INFS and
    PB.    There is a single instance, non-workflow
    business process, ‘Project Information’ that contains a data element in the
    upper form definition, Project ID.  The Project ID is set to auto-populate from the multi-instance “INFS”
    project shell attribute, which is populated manually. 
    Issue:  The auto-populate functionality for the
    Project ID ‘Shell_shellName_shell’ data element within the single-instance
    Project Information BP only functions within one of the shells, either
    INFS or PB, but not both.  The INF and INFS shells are currently deployed
    to production, PB and PBS shell are not.
    It is critical that Project ID ‘Shell_shellname_shell’ data element is populated correctly in the
    Project Information upper form of both shells, INFS and PB,
    because that data element is referenced by multiple business processes and
    integrations. 
    The attribute form definitions for both single and multiple instance project shells are identical.  The Project ID utilizes the same data
    element ‘SHELL_shellName_shell’ as is defined in both shell attribute forms
    (INFS and PB). 
    The data definition source is a Unifier system-level variable, SYS Shell
    Name (String, 128, Text Box)
    Potential Solutions:
    1. Create a Project ID DE of another data type which can
    be successfully auto-populated from either shell.  Drawback: all BPs and integrations which
    reference Shell_Shellname_shell will need to be rewritten.
    2. Investigate converting the Project Information single-instance
    to a  multi-instance BP, and create a
    separate instance for each single-instance shell type.  Same Drawback as Option #1, but with additional
    rework.  Most likely Project Information
    would have to be recreated as a new BP.
    Not sure that this option would even work.
    3. Create a separate Project Information BP for PB.  Drawback:  Two separate BPs for Project Information would
    need to be created.  All existing BPs
    refer to Project Information, so this option could potentially invalidate the
    ability to use the existing BPs in the PB shell.

    Was it really necessary to post the whole API description?!?
    Locale[] locales = Locale.ENGLISH();ENGLISH is not a method in class Locale, so do not add the braces "( );".
    Also, the constant ENGLISH is not an array, but just a single Locale object.
    You didn't say what your problem was. What do you want to achieve with your program and what is it that you don't understand?

  • Acrobat 9 Pro: Order Form, need SUM=blank? and not $0.00 (HELP!!!)

    I know this might be an easy question for people with javascript knowledge.... but I can't get this working... please help!
    I need Order Form total field (sum) to default to blank (instead of $0.00).
    *example: Under >calculate I am using "simplified field notation" and (Qty1)*7.95 -- sum appears in "total 1"
         The unit price is $7.95 - The value of Qty1 = total 1 (calculations are working fine)
         Currently all total boxes read as $0.00 --- I need SUM to be blank until a customer selects a quantity
    How can I make the SUM default to blank? and NOT $0.00 - Is it a validation script??? If so, please help with code!!!
    Help is appreciated - Thanks!
    PS - SUM fields can't be set as non-printing, because Shipping Dept./Accounting Dept. needs ability to print and view totals (if amount is selected - otherwise it could be blank).
    *** SUM fields need to be blank for customers who print form and manually enter data & totals...
    I am using a Mac, and Adobe Acrobat 9 Pro

    I appreciate the reply... (it's been many hours without one)
    I tried the validation script, and as you indicated, the only way the total field (with the validation script) appears blank is AFTER the Reset button is clicked. (However I have not checked this in a reader)
    I can't see how I can make it work in that manner. Customer inputs Billing & Delivery Addresses at top, then proceeds to select products. If the reset button has to be pressed, all the data (ie. addresses) are removed.
    If there was a way to apply the reset function automatically at the opening of the pdf doc. then it would achieve the result I need. I wonder if there isn't a way with a check box at the top that customer clicks which would apply the reset function.
    If you (or anyone) has any further tips or help I would appreciate it. This is the last item the client has requested for change.
    PS. In case anyone can think of a print script to use... The sum value, when =0 (no qty) needs to print blank sum fields (not $0.00) BUT if there is a sum value, the amount must print (for Ship/Acct Depts)
    *** I just thought of something... The only time where the sum value needs to be blank is when customer prints and inputs data by hand.... so, would there be a way to add a print button that can also clear the sum values at the same time with the "reset" function and the validation script???

  • Oracle Forms - need to update multi-record block - Help needed asap

    Hi,
    We are using Oracle apps release 11i - Oracle forms 6i.
    I have a field "project_start_date" in project_block in a custom form. There is another multi-record block called role_block in the same custom form and it has a field named start_date. Requirement is when ever I make change in the project_start_date in project_block, that should reflect in role_block.start_date. I tried different means and could update only the very first record of the multi-record block - role_block. I need to update all the records in the role_block with the same project_start_date. Used looping and several other methods. But could not achieve. Any help is really appreciated.
    Thanks
    Akil

    Hi;
    For your issue i suggest close your thread here as changing thread status to answered and move it to Forum Home » Application Development in PL/SQL » Forms which you can get more quick response
    Regard
    Helios

  • J_3R_INV1_CONTEXT or J_3R_INV1 PDF form need help

    Hello All!
    Help me please!
    When I try to PDF print of PDF form INV-1, the subtotal on first page is incorect. becose qty * prise is incorect. qty = 1 but report do: qty = 1000 & all other data in report is incorect.
    How i can try to correct this?

    First of all sorry of my bad english.
    On Page 1 in table on column 12 qty = 1, on Page 2 in first row (a)
    Write ОДИН (in russian one or 1), in second row (Б) write ОДНА ТЫСЯЧА (in russian 1000) but it's incorrect.
    row (В) = row(a) * price. I need row (B) = 1Price but i have 1000Price.

  • Dynamic form needs to be saved as a flat/unmodifiable pdf

    Hi All,
    Please let me know what i can do!
    I have enabled "Enable Additional Features" in acrobat to allow my dynamic pdf form to be saved. However, after being saved and reopenning the saved form in reader, the pdf is still dynamic and edits can to text fields or drop down lists can still be made. I need it to be saved as a flat pdf file.
    I also have a "submit by email" button, programmed to email the filled out pdf to a particualr emailbox. Clicking the "submit by email" button, will attach the pdf, but unfortunately the file still allow edits.
    Help please!
    -KL 

    Hi,
    a XFA form cannot be real flattened by Acrobat nor Reader except by printing.
    Another method is to set all fields access property to readOnly be scripting.
    function lockFields(vNode) {
        if (vNode.className === "field") {
            vNode.access = "protected";
        for (var i = 0; i < vNode.nodes.length; i += 1) {
            lockFields(vNode.nodes.item(i));
    lockFields(xfa.form);

  • Oracle Web Forms - need a method to get data from a Form to Excel

    I am running Oracle Forms 6i for the web.
    I need a way of using the old DDE or OLE implmentation to get
    data to an Excel spreadsheet. Ideally opening an existing
    spreadsheet and inserting new data.
    Anyone been able to do this ?
    Thanks in advance
    Dave.

    If you have EXcel on your application server (the one where forms
    is), you can still use OLE2 calls to create or modify the excel
    sheet on the server. Then you can use web.show_document to get
    the excel file back to the client machine.

  • Date Format in Forms- Need inputs.

    Forms [32 Bit] Version 9.0.4.1.0 (Production)
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    I have date type field (Db column of date type Date ) in a data block and its value is set based on a char field value in another block, in a trigger event.
    In a when-button-pressed trigger, I convert a char item value (from another block - :mod_plan.date_plan_to_zero, Eg say 05/27/2013) to to_date, something like below.
    trigger code
    begin
    :lims_flood_gates.plan_date := to_date (:mod_plan.plan_date_to_zero,'mm/dd/yyyy');
    end;
    When I run the form in debug mode, I see that plan_date (which is a date type field, with format mask MM/DD/RRRR) has a value '2013/05/27 00:00:00'...?! as soon as the above code is run.
    using TRUNC did not work. No matter what, the value when converted to date and assigned to the variable, takes the said format. I need to lose the time portion and need the date to be mm/dd/yyyy format.
    How can I do that?
    Thanks
    SR

    Try these in when-new-form-instance trigger:
    set_application_property(builtin_date_format,'mm/dd/yyyy');
         set_application_property(plsql_date_format,'mm/dd/yyyy');
         FORMS_DDL('ALTER SESSION SET NLS_DATE_FORMAT = "mm/dd/yyyy"');
    I don't know about that format mm/dd/rrrr I'd use y's instead.
    As others have said, a date in the database is a date-time so you can never really get rid of the time underneath the hood.

Maybe you are looking for