J_3R_INV1_CONTEXT or J_3R_INV1 PDF form need help

Hello All!
Help me please!
When I try to PDF print of PDF form INV-1, the subtotal on first page is incorect. becose qty * prise is incorect. qty = 1 but report do: qty = 1000 & all other data in report is incorect.
How i can try to correct this?

First of all sorry of my bad english.
On Page 1 in table on column 12 qty = 1, on Page 2 in first row (a)
Write ОДИН (in russian one or 1), in second row (Б) write ОДНА ТЫСЯЧА (in russian 1000) but it's incorrect.
row (В) = row(a) * price. I need row (B) = 1Price but i have 1000Price.

Similar Messages

Hi, i am new to PDF forms & need to make drop down menu with pictures, how do i do that ?

Hi, i am new to PDF forms & need to make drop down menu with pictures, how do i do that ?
some one suggested to use coding to achieve similar results, but i don't know where and how to use it, please help!

Sorry, images in drop downs are not supported by Formscentral.
Andrew

Adobe upgrade - lost all saved data on pdf form. Help?

I recently spent weeks completing and revising a very lengthy and important application form (pdf). Upon submitting it I was told that the data could not be viewed and that I needed to update my Adobe to the latest version (11). Upon doing this I lost all saved data on the pdf forms, I wasn't pre warned about this and am extremely dissapointed as it tooks me ages to find all the information and re-word it to a high standard. Is there any way that it can be recovered?
I thought it would be in my sent emails but that is blank as well. Help?

If you used an earlier version of Reader before it would only have been possible to save the filled-in information in the file if a special right was applied to it by the authors, before you received it. If that right was not applied then you should have seen an error message saying that the file can't be saved with the data you entered.

LiveCycle/PDF Forms Submission Help

Hello all,
I've recently been tasked with updating the website for my employer, a County Public Safety Department in PA. We currently accept forms from a number of other departments in all forms. Some come via FAX, some email, etc. We're trying to simplify the process and put all of the available forms on our website, and allowing them to be submitted electronically. My boss wanted me to look into FDF, but it seems that is a bit outdated.
At this point, I simply need some help determining exactly what software I need.
I need to have a multitude of documents available on the website and once filled out, they need to go to a myriad of people. I see an email submission is fairly easy, but as this is government, they want things sent to several people and logged in a central location. What software do I need on the server to accept the documents? They don't neccesarily need to go into a DB, but that option is available.
Thanks
jdestefano911

Hi,
If considering PDF forms, then it is important to consider what software the user will have to open/fill in/submit these forms, e.g. Acrobat or Reader or third party PDF viewers.
Before you deploy a form you can entend its functionality for users with Reader. If you don't do this, users with Reader will only be able to submit by http.
Here is a summary of deployment options and the features/restrictions in each case: http://assure.ly/etkFNU. Click the link at the end of the post for the summary.
If processing a lot of data then it may be worthwhile considering components from LiveCycle Enterprise Suite. http://www.adobe.com/products/livecycle/. Particularly when requiring logging of interactions and a workflow with different outcomes.
Maybe talk to an Adobe rep in your area.
Hope that helps,
Niall

Do Workspace ES PDF Forms need to be extended?

Hello experts,
I have a pressing question for you all.
We have Adobe LiveCycle ES installed and have developed some processes. But we are facing some problems lately with our PDF with WDSL call embedded in. The problem is that the web service button does work after you click it. So I was wondering whether the form needs extension or not?
If it does not what can we do to make it work with Adobe reader X?
Thank you.

Thank you Chuck for your reply.
Now the interesting part of my issue is that on one PC the Form works fine in the Workspace environment, but on most of the computers it does not. I wonder how to set the environment so that the form can work on the other computers? All the computers do have the same version of browser IE8 and Firefox 4.0.
Thank you in advance for your assistance.

Non - interactive PDF form needs to be typed in

I have a PDF form, non-interactive, which I would like to type the answers into. Easiest and most effective way to do this? Thanks,
Jay

Hi Jay,
"Into" is difficult. "Onto" is workable.
Open the document in Preview.
Go File > Save as... and choose PICT.
Open a New AppleWorks Draw document.
Drag the PICT version of the pdf document into the Draw doc (or go File > Insert to insert the file).
If necessary, resize the image to fit the page.*
For each answer:
Choose the Text tool from the Tools palette, and drag a Text frame onto one of the answer spaces.
Type in the answer.
Repeat as necessary.**
When finished, press command-P to get to the Print dialogue, then either Print the document, or click the PDF button to save it as a PDF file.*
Regards,
Barry
*Use Scale by Percent, in the Arrange menu if the image is larger than the page space. Drag the handles at each corner of the image if they're all visible.
**You can also type a few characters into the first answer space, then press command-D to duplicate the frame, and drag the duplicate(s) to the other answer spaces. Text frames drop off the document if they contain no text.
*The PDF file will lose sharpness due to recompression each time it is changed and saved.
B

Getting data to show from context in adobe pdf form - Please help

Friends,
I need to get data passed to pdf based print form.
Here are the steps i perfomed to bring the data to the form:
1) created adobe form layout and context in sfp tcode
2) created interface in sfp tcode. used a copy of a standard sap interface with the code initialization intact.
3) dragged fields from interface to context
4) did default binding in object palette of the form fields in the layout to the respective fields from context
still, the data is not getting displayed in the form layout when the form is executed, whereas it is getting displayed in the standard form.
Am I missing something here... Please help me as this is urgent.
Points will be rewarded for helpful answers.
Regards,
John.

Solved

J_3R_INV1 PDF forms for russia

J_3R_INV1 don't work correctly. Help me please.

First of all sorry of my bad english.
On Page 1 in table on column 12 qty = 1, on Page 2 in first row (a)
Write ОДИН (in russian one or 1), in second row (Б) write ОДНА ТЫСЯЧА (in russian 1000) but it's incorrect.
row (В) = row(a) * price. I need row (B) = 1Price but i have 1000Price.

New to Forms, need help in Installing the Summit Application

Can someone guide me in installing Summit appl. and a runtime env. configuration. I am using 10g Dev. and 10g DB.
I have put the complete summit folder (got it from OTN) in C:/ and was successful in importing the summit data from the command line.
the problems i am facing are:
*Should i directly point to the summit folder in the c:/ while entering values for forms_path in the registry?
*next point in the readme file says
compile the application. The file gen.bat will generate files under microsoft windows. What application should I compile and how?
Runtime environment configuration
# Summit Application
Alias /summit/ "C:\summit/"
*this has to be added to the HTTPD.CONF file in Apache.
But i have found this file in my pc at this loc: (C:\DevSuiteHome_1\perl\site\5.6.1\lib\Apache) Is this the same file?
[summit]
IE=JInitiator
archive_jini=f60all_jinit.jar,/summit/RoundedButton.class
userid=summit/summit@<connect_string>
form=customers
pageTitle=Summit
splashScreen=no
lookAndFeel=oracle
separateFrame=false
width=994
height=582
serverapp=/summit/summit_reg
envFile=summit.env
the above is to be added to the FORMSWEB.CFG file, which i found. can i just change the connect_string and add it at the bottom of the file that i view in notepad. or do i have to fit it in somewhere in between the existing code in the file.
PLEASE HELP!!

The first thing you must realize is that this Demo is very old and was created for a very old Forms version (6.0.x). At least three new releases have come out since this demo was created.
The documentation for the demo is specific to that old version. Every reference to "60" should be removed. For example a reference to FORMS60_PATH has now been changed to FORMS_PATH. This applies to ALL variables.
The same applies to file names. For example f60all.jar is now frmall.jar. Same is true for f60all_jinit.jar, which is now frmall_jinit.jar.
So, as you can see copying the README word for word is going to cause you problems.
Here is an overview of what you likely need to do based on your last update:
1. Verify that you successfully imported the database objects related to the demo. Login as summit and see if the tables and data actually exist. If not, this should be corrected first.
2. Whether you use default.env or summit.env is entirely up to you. If you choose to use default.env, the only thing I can think of that would need to be changed is the FORMS_PATH. Add the path to where your FMX, MMX, and PLX files will be located.
If you choose to use summit.env, copy the file to ..\forms\server (this is the same directory where you will find default.env). Open this file in a text editor. You will need to change all of the "60" references like I previously mentioned. You will likely also need to change the value of ORACLE_HOME as well as many others. This is why using the existing default.env would probably be easier.
If you carefully read the contents of summit.env, you should be able to understand what needs to be changed. I'm sure many of the directories noted in the file won't even exist. You need to set them to the equivalent on your system.
3. If you plan to use a "gen.bat" file to compile the application, you will likely need to open it in a text editor first. Verify that FORMS_PATH, ORACLE_HOME, PATH and all other variables are correctly set.
4. If you are using Developer Suite there is no Apache, so setting the Alias is a little different. However, as previously mentioned, this is unnecessary anyway IF you copy the demos CLASS and JAR files to the ..\forms\java directory. You will then not use the Alias reference in your ARCHIVE and ARCHIVE_JINI entries. For example simply do this:
archive_jini=frmall_jinit.jar,RoundedButton.class
archive=frmall_jinit.jar,RoundedButton.class
5. As mentioned, your formsweb.cfg entries will look like this and should be at the bottom of the file below the existing entries:
[summit]
archive_jini=frmall_jinit.jar,/summit/RoundedButton.class
userid=summit/summit@ORCL
form=customers
pageTitle=Summit
splashScreen=no
lookAndFeel=oracle
separateFrame=false
width=994
height=582
serverApp=summit_reg
envFile=summit.env
The reference to serverApp is for access to the .dat file, which I will assume you have in your C:\summit directory. Again, remove the Alias reference and copy the file within the Oracle Home where the original is found. If the demo .dat file is named "Registry.dat", rename the original so you can revert back to it later.
This file should be stored in:...\forms\java\oracle\forms\registry
If you really want to create the Alias and follow the instructions as closely as possible, you will find that the Alias should be configured in the following:
...\j2ee\DevSuite\application-deployments\forms\formsweb\orion-web.xml
Use the existing entries as an example. Your entry will look something like this:
<virtual-directory virtual-path="/summit" real-path="C:\summit" />
If you are new to all of this, I would recommend that you flip through some of the documentation. Starting with a demo before understanding how the product works is probably not the best approach. Here are some references to useful documentation. References to additional documentation can be found in link on these pages. Be aware that most documentation which was created for Forms 9.0.4 will still apply to 10.1.2.
Forms 10.1.2 Tech Listing
http://www.oracle.com/technology/products/forms/techlisting10gR2.html
Forms 9.0.4 Tech Listing
http://www.oracle.com/technology/products/forms/techlisting10g.html
Forms 10.1.2 Online Help (same as Help found in Builder)
http://www.oracle.com/webapps/online-help/forms/10g/
Forms 10.1.2 Deployment Guide
http://download.oracle.com/docs/cd/B19375_07/doc/frs/forms/B14032_03/toc.htm

I can't get my print widget to display certificate in PDF file, need help.

I can get my certificate to display with all the variables on the slide, inserted my print widget which asks for a location to save the pdf file. I save it, open it and its blank.
Any suggestions?

Centering an entire page's worth of content is pretty simple, but not as simple as adding align:center to the css of every element.
You likely need to remove a bunch of stuff from your css if that's what you were trying. Seeing the page is going to be the best way to tell you how to fix it.
Many people will use a container like <div id="wrapper"> to center their page, so that's what I'll use in the example. Here is the css that would go in your page's <style> tags, or in your external .css file...
#wrapper {
     width:950px;
     margin:0 auto;
Then in the html...
<body>
<div id="wrapper">
     all of your page's content
</div>
</body>
What this does is creates a 950 pixel wide wrapper around all of your content (the pixel amount isn't as important as the fact that there is a width that is less than 100%). The browser then sets the left and right margin to the same setting using all of the available horizontal space by setting the left and right margins to auto. Basically, if the browser viewport is wider than the wrapper div (anything more than 950 pixels in this example), the left and right margin will split that remaining amount between themselves and center your content.

Time statemement in pdf format|Need help urgent

Hi ,
Can somebody give details about the spro configuration and any other configuration required to display Time statement on portal .We urgently require help on this . Where exactly in the decision tree are the changes required

Hi,
Time Statement works only you implement Time Evalutation, once you run the Time Evalutationn than you activate the HR FORM =SAP_TIMESLIP , and maintain the Feature HRFOR.
Hope this will help you!!
Regards,
Samba.

PHP Email form, need help...

Heya,
I have a flash form that uses PHP to send the data to an
email, but it causes all of the data to display on the same line
with no spaces when recieved via email, can anyone help? Thanks!
Code:
<?php
$sendTo = "[email protected]";
$subject = "Contact Form from Cabinet Source Website";
$headers = "From: " . $_POST["name"] ." ". $_POST["phone"] .
"<" . $_POST["comments"] .">\r\n";
$headers .= "Reply-To: " . $_POST["name"] . "\r\n";
$headers .= "Return-path: " . $_POST["name"];
$message = $_POST["comments"];
mail($sendTo, $subject, $message, $headers);
?>

As bregent says, the names of the variables you're assigning at the top of the script don't match the variables that you're adding to the $body.
Another problem is that you're using lowercase for the $_POST array. For example, you have $_post['gt']. PHP is case-sensitive. It should be $_POST['gt'].
Even when you get those problems sorted out, the script is extremely insecure because you're not checking any of the values submitted. In particular, you're assigning the value of the 'gt' input field to the From: header. This will lay the form wide open to attack by spammers. (Google for "email header injection" to understand the problem.)
If you want to put a value from the form into the headers, you must first make sure it's safe. For example, I see that gt is meant to be an Xbox Live gamertag. Assuming it must contain only letters and numbers, you should sanitize it like this before inserting it into the headers:
$gt = filter_input(INPUT_POST, 'gt', FILTER_VALIDATE_REGEXP, array('options' => array('regexp' => '/^[a-zA-Z0-9]+$/')));

Sending .pdf files -- Need Help.

Whenever I try to send a .pdf file, it includes the entire file in the body of my email. I want to send it as an attachment. Most people that I send these emails to have a hard time reading the file.
I hope that makes sense. Thanks in advance for your help.

It is being sent as an attachment.
The Mail.app displays all image/photo and single page PDF attachments inline or viewed in place within the body of the message by default which cannot be turned off and is not the same as being embedded.
You can control-click on such an attachment in the message body and at select View as Icon but this does not change anything in regards to the attachment.
Depending on the recipient's email client and available preference settings, such attachments may appear inline or viewed in place within the body of the message when the message is opened (as with the Mail.app) or as attached files only which must be opened separately to be viewed which the sender has no control over.
That being said, there are a few things you should not do with a single page PDF attachment.
Do not use the Image Size adjustment available at the bottom right of the message window which is intended and should only be used with a picture/image attachment.
Be sure the file extension is used with the attached file which applies to any attachment.
When sending attachments to Windows user, be sure to select Send Windows Friendly Attachments - which I have on by default regardless of sending attachments to Windows or Mac users.
Are you using RTF for message composition and including a Signature?

PDF Forms JavaScript Help

Hello,
I've learned the hard way that JavaScript in forms may not work on tablets (across various OS). I have two custom calculation scripts running in my form, and was wondering if there's another way to write them, or a work around, to where it would work on tablets (I'm no JavaScript expert!)?
I have one calculation that counts the number of check boxes in a list (check boxes 20-31) that are checked:
var total = 0;
for (var i=20; i<=31; i++) {
if (this.getField("Check Box"+i).value!="Off") total++;
event.value = total;
From that, I have another calculation that returns a value in another field based on the number of check boxes checked:
var a = this.getField("Check Box Count").valueAsString;
event.value = "";
if (a=="1") event.value = "0.00";
if (a=="2") event.value = "300.00";
if (a=="3") event.value = "300.00";
if (a=="4") event.value = "300.00";
if (a=="5") event.value = "300.00";
if (a=="6") event.value = "300.00";
if (a=="7") event.value = "300.00";
if (a=="8") event.value = "300.00";
if (a=="9") event.value = "300.00";
if (a=="10") event.value = "300.00";
if (a=="11") event.value = "300.00";
if (a=="12") event.value = "300.00";
I don't know which of the two, or both, is the issue. Is there a work around I could use?
Many many thanks in advance for any help!!

Do you mean update the full script to the below? I tried that and unfortunately it didn't work. Am I missing a command somewhere?
Thanks!
var a = this.getField("Check Box Count");
event.value = "";
if (a==1) event.value = "0.00";
if (a==2) event.value = "300.00";
if (a==3) event.value = "300.00";
if (a==4) event.value = "300.00";
if (a==5) event.value = "300.00";
if (a==6) event.value = "300.00";
if (a==7) event.value = "300.00";
if (a==8) event.value = "300.00";
if (a==9) event.value = "300.00";
if (a==10) event.value = "300.00";
if (a==11) event.value = "300.00";
if (a==12) event.value = "300.00";

Forms - Needed help in disabling/hiding a field

Hi
I'm working on a "Order management - Quick sales order" sutomization.
This is specifically for a set of users in the company.
At the line level attribute we have a DFF. This is common to this form ( quick sales order) and Also the main Sales order form- Order organizer.
I have to hide this line DFF in my custom form.
I cant hide it using form Personalization as the moment i click on it the DFF pops up.
I disabled the field in the fmb. But that does not take effect. The field still shows up.
THe other option is
-> Disable the DFF( unfreeze it) then go to the line attribute.
-> It wont pop up the DFF since its diabled.
-> And then using folder options hide the field. And later enable the DFF
Doing this. Will it cause any problem to the DFF or the values as this DFF is being used in other forms like sales order form- line level .????
Any help on this or any other way to acheive this requirement.
Thanks in advance

Your best chance of getting an answer to your question is to post it in the EBS General Discussion Forum (General EBS Discussion This Forum is dedicated to non-EBS Forms development.
Craig...

J_3R_INV1_CONTEXT or J_3R_INV1 PDF form need help

Similar Messages

Maybe you are looking for