Form paging
I have created a form in formscentral based on the "new client on-boarding" template. Looks fine. However there are two paging problems. Firstly, when I test it doesn't paginate as it shows in the form. And secondly there is a page 4 with no data on it at all. Help!
There are 2 views in the Design tab. In the bottom right corner there is a drop down that has "Page View" and "Web View" on it. Page view is for PDF forms; Web view is for Web/HTML forms. The page breaks on each view are independent of each other. It seems you are looking at the Page view but testing a HTML form. You need to flip to the web view and setup the page breaks there.
Randy
Similar Messages
-
Hi there,
Please could someone help with a paging issue that I am having with a Livecycle form? One of the subforms I have created keeps jumping to the end of the page and I do not know for the life of me how to fix it!! It is driving me crazy and I seem to have tried everything.
Any help greatly appreciated.
Thanks,
KenPost your question in one of the LiveCycle Designer forums.
-
How can I add a new field in selection screen for this report
*& Report ZGS_BARKODLA_HIZLI_GIRIS
report zgs_barkodla_hizli_giris.
tables: mara,
mseg,
mch1,
*mch1,
mkpf,
mchb ,
makt.
type-pools: esp1.
data: i_message_tab type esp1_message_tab_type,
wa_message_tab type esp1_message_wa_type ,
sc_count type i.
ALV
type-pools: slis, kkblo.
data: gs_layout type slis_layout_alv ,
gt_fldcat type slis_t_fieldcat_alv with header line,
gt_header type slis_t_listheader with header line,
gt_sortin type slis_t_sortinfo_alv with header line,
g_repid like sy-repid .
define add-fieldcat.
gt_fldcat-fieldname = &1.
gt_fldcat-ref_tabname = &2.
gt_fldcat-seltext_s = &3.
gt_fldcat-seltext_m = &3.
gt_fldcat-seltext_l = &3.
gt_fldcat-reptext_ddic = &3.
gt_fldcat-ddictxt = 'M'.
append gt_fldcat.
clear gt_fldcat.
end-of-definition.
types: begin of titab,
sel type xfeld,
matnr type matnr,
maktx type maktx,
charg type charg_d,
menge type menge_d,
erfmg type erfmg,
end of titab.
data : witab type titab.
data : itab type table of titab.
data : ok_code type sy-ucomm.
controls: tc_itab type tableview using screen 0100.
data: gv_header like bapi2017_gm_head_01,
gv_code like bapi2017_gm_code.
BAPI export parameters
data: gv_headret type bapi2017_gm_head_ret,
gv_matdoc type bapi2017_gm_head_ret-mat_doc,
gv_matyear type bapi2017_gm_head_ret-doc_year.
data : lv_objek like inob-objek .
data : ls_inob like inob .
data : imseg type ty_t_mseg.
data : wmseg type mseg.
data : answer.
data : count type i.
data : v_atinn type atinn.
BAPI movement details
data: i_goodsmvt_items type bapi2017_gm_item_create occurs 0
with header line.
data: i_return type bapiret2 occurs 0 with header line.
start-of-selection.
call function 'CONVERSION_EXIT_ATINN_INPUT'
exporting
input = 'Z_ORAN'
importing
output = v_atinn.
call screen 100.
*& Module status_0100 OUTPUT
module status_0100 output.
set pf-status '100'.
set titlebar '100'.
mseg-werks = 1000.
mseg-umwrk = 1000.
**added
sc_count = sc_count + 1.
if sc_count eq 1.
mseg-bwart = 313.
endif.
mkpf-budat = sy-datum.
**added
describe table itab lines tc_itab-lines.
endmodule. " status_0100 OUTPUT
*& Module user_command_0100 INPUT
module user_command_0100 input.
data field(20).
data: line_t like sy-index.
data: lines like sy-index.
data line_count like sy-loopc.
data: begin of cols,
screen like screen,
index type i,
selected(1) type c,
vislength like icon-oleng,
invisible(1) type c,
end of cols.
case ok_code.
when 'DELE'.
delete itab where sel eq 'X'.
when 'ENTE'.
check *mch1-charg is not initial.
read table itab into witab with key charg = *mch1-charg.
if not sy-subrc is initial.
witab-charg = *mch1-charg.
select single matnr from mch1 into witab-matnr
where charg eq witab-charg.
if not syst-subrc is initial.
set cursor field '*MCH1-CHARG'.
message e115(12) with *mch1-charg.
endif.
select single maktx from makt into witab-maktx
where matnr eq witab-matnr
and spras eq syst-langu.
witab-erfmg = 1.
concatenate witab-matnr witab-charg into lv_objek .
clear ls_inob .
select single * into ls_inob
from inob
where objek = lv_objek and
klart = '023' and
obtab = 'MCH1' .
select single atflv from ausp into witab-menge
where objek = ls_inob-cuobj and
klart = '023' .
append witab to itab.
**added
clear *mch1-charg.
**added
endif.
when 'SAVE'.
if mkpf-budat is initial.
set cursor field 'MKPF-BUDAT'.
message e055(00).
endif.
if mseg-lgort is initial.
set cursor field 'MSEG-LGORT'.
message e055(00).
endif.
if mseg-umlgo is initial.
set cursor field 'MSEG-UMLGO'.
message e055(00).
endif.
if mseg-bwart is initial.
set cursor field 'MSEG-BWART'.
message e055(00).
endif.
refresh imseg.
loop at itab into witab.
move-corresponding witab to wmseg.
append wmseg to imseg.
endloop.
call function 'ZMM_POPUP_WITH_DATA'
exporting
imseg = imseg
importing
answer = answer.
if answer eq 'Y'.
perform create_goods_movement.
endif.
when 'P--'.
clear ok_code.
perform paging using 'P--'.
set cursor field 'MARA-MATNR' line 1.
when 'P-'.
clear ok_code.
perform paging using 'P-'.
set cursor field 'MARA-MATNR' line 1.
when 'P+'.
clear ok_code.
clear lines.
perform paging using 'P+'.
set cursor field 'MARA-MATNR' line 1.
when 'P++'.
clear ok_code.
perform paging using 'P++'.
set cursor field 'MARA-MATNR' line 1.
when 'SORA'.
read table tc_itab-cols into cols with key selected = 'X'.
if sy-subrc is initial.
field = cols-screen.
field = field+5(10).
sort itab ascending by (field).
endif.
when 'SORZ'.
read table tc_itab-cols into cols with key selected = 'X'.
if sy-subrc is initial.
field = cols-screen.
field = field+5(10).
sort itab descending by (field).
endif.
when 'PRNT'.
perform write_alv.
endcase.
endmodule. " user_command_0100 INPUT
*& Module read_table OUTPUT
module read_table output.
mara-matnr = witab-matnr.
makt-maktx = witab-maktx.
mch1-charg = witab-charg.
mseg-menge = witab-menge.
mseg-erfmg = witab-erfmg.
line_count = sy-loopc.
endmodule. " read_table OUTPUT
*& Module write_table INPUT
module write_table input.
witab-matnr = mara-matnr.
witab-maktx = makt-maktx.
witab-charg = mch1-charg.
witab-menge = mseg-menge.
witab-erfmg = mseg-erfmg.
modify itab from witab index tc_itab-current_line.
endmodule. " write_table INPUT
*& Module exit INPUT
module exit input.
leave to screen 0 .
endmodule. " exit INPUT
*& Form create_goods_movement
form create_goods_movement .
clear : gv_header, i_return[], i_goodsmvt_items[].
gv_header-doc_date = gv_header-pstng_date = mkpf-budat.
gv_header-pr_uname = sy-uname.
GM with reference to reservation
loop at itab into witab.
i_goodsmvt_items-material = witab-matnr.
i_goodsmvt_items-entry_qnt = witab-erfmg.
i_goodsmvt_items-entry_uom = 'ST'.
i_goodsmvt_items-move_type = mseg-bwart.
i_goodsmvt_items-plant = mseg-werks.
i_goodsmvt_items-stge_loc = mseg-lgort.
i_goodsmvt_items-move_plant = mseg-umwrk.
i_goodsmvt_items-move_stloc = mseg-umlgo.
i_goodsmvt_items-batch = witab-charg.
append i_goodsmvt_items.
endloop.
find BAPI processing transaction
if gv_code is initial.
perform determine_bapi_code using mseg-bwart
changing gv_code.
endif.
call function 'BAPI_GOODSMVT_CREATE'
exporting
goodsmvt_header = gv_header
goodsmvt_code = gv_code
importing
goodsmvt_headret = gv_headret
materialdocument = gv_matdoc
matdocumentyear = gv_matyear
tables
goodsmvt_item = i_goodsmvt_items
return = i_return[].
cancel blocking process
loop at i_return where type eq 'E' or type eq 'A' or type eq 'X'.
exit.
endloop.
if sy-subrc ne 0.
refresh i_message_tab.
call function 'BAPI_TRANSACTION_COMMIT'
exporting
wait = 'X'.
wa_message_tab-msgid = 'M7'..
wa_message_tab-msgty = 'S'.
wa_message_tab-msgno = '060'.
wa_message_tab-msgv1 = gv_matdoc.
wa_message_tab-msgv2 = ''.
wa_message_tab-msgv3 = ''.
wa_message_tab-msgv4 = ''.
append wa_message_tab to i_message_tab.
else.
refresh i_message_tab.
call function 'BAPI_TRANSACTION_ROLLBACK'.
write a message as there is an unexpected error.
loop at i_return.
wa_message_tab-msgid = i_return-id.
wa_message_tab-msgty = i_return-type.
wa_message_tab-msgno = i_return-number.
wa_message_tab-msgv1 = i_return-message_v1.
wa_message_tab-msgv2 = i_return-message_v2.
wa_message_tab-msgv3 = i_return-message_v3.
wa_message_tab-msgv4 = i_return-message_v4.
append wa_message_tab to i_message_tab.
endloop.
endif.
call function 'C14Z_MESSAGES_SHOW_AS_POPUP'
tables
i_message_tab = i_message_tab.
endform. " create_goods_movement
*& Form determine_bapi_code
form determine_bapi_code using p_bwart type bwart
changing p_code type bapi2017_gm_code.
data: lt_t158b type table of t158b with header line.
clear p_code.
select tcode from t158b into corresponding fields of table lt_t158b
where bwart eq p_bwart.
loop at lt_t158b.
select single gmcode from t158g into p_code
where tcode eq lt_t158b-tcode.
if sy-subrc is initial.
exit.
endif.
endloop.
endform. " determine_bapi_code
*& Form paging
form paging using code.
data: i type i,
j type i.
case code.
when 'P--'. tc_itab-top_line = 1.
when 'P-'.
tc_itab-top_line = tc_itab-top_line - line_count.
if tc_itab-top_line le 0.
tc_itab-top_line = 1.
endif.
when 'P+'.
i = tc_itab-top_line + line_count.
j = tc_itab-lines - line_count + 1.
if j le 0.
j = 1.
endif.
if i le j.
tc_itab-top_line = i.
else.
tc_itab-top_line = j.
endif.
when 'P++'.
tc_itab-top_line = tc_itab-lines - line_count + 1.
if tc_itab-top_line le 0.
tc_itab-top_line = 1.
endif.
endcase.
endform. " paging
*& Form write_alv
form write_alv .
perform find_list_header.
perform fill_field_cat.
perform fill_sortinfo.
g_repid = sy-repid.
gs_layout-colwidth_optimize = 'X'.
gs_layout-zebra = 'X'.
answer = 'Y'.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_buffer_active = ''
i_callback_program = g_repid
i_save = 'A'
i_callback_top_of_page = 'TOP_OF_PAGE'
is_layout = gs_layout
it_fieldcat = gt_fldcat[]
it_sort = gt_sortin[]
tables
t_outtab = itab[].
endform. " write_alv
Form find_list_header
form find_list_header.
data : v_datum(10),
v_datlo(10),
v_dathi(10),
v_uzeit(8).
clear: gt_header, gt_header[].
gt_header-typ = 'H'.
gt_header-info = sy-title.
append gt_header.
clear gt_header.
gt_header-typ = 'S'.
gt_header-key = 'Çalıştırma Zamanı : '.
write syst-datum to v_datum.
write syst-uzeit to v_uzeit.
concatenate v_datum '/' v_uzeit into gt_header-info.
append gt_header.
endform. " find_list_header
Form fill_field_cat
form fill_field_cat.
refresh gt_fldcat.
clear gt_fldcat.
gt_fldcat-key = 'X'.
add-fieldcat 'MATNR' 'MARA' ''.
add-fieldcat 'MAKTX' 'MAKT' ''.
add-fieldcat 'CHARG' 'MSEG' ''.
gt_fldcat-do_sum = 'X'.
add-fieldcat 'MEINS' 'MARA' 'Olcu Birimi '.
gt_fldcat-do_sum = 'X'.
add-fieldcat 'ERFMG' 'MSEG' 'Adet'.
endform. " fill_field_cat
Form fill_sortinfo
form fill_sortinfo.
gt_sortin-up = 'X'.
gt_sortin-fieldname = 'MATNR'. append gt_sortin.
endform. " fill_sortinfo
Form top_of_page *
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
i_logo = 'ZKUTAS'
it_list_commentary = gt_header[].
endform. " top_of_pageHI,
if it is a normal report program then you can directly create a Selection screen field.
After the Type-pool you can use Parameters or Select-options to create the selection screen field..
If it is a Modulpool program then you can create a selection scren field like
SELECTION-SCREEN BEGIN OF SCREEN 1100 AS SUBSCREEN.
PARAMETERS: p1(10) TYPE c.
SELECTION-SCREEN END OF SCREEN 1100.
defines a selection screens 1100 as subscreens.
The next screen number of screen 100 is 100 (statically-defined).
PROCESS BEFORE OUTPUT.
MODULE status_0100.
CALL SUBSCREEN area INCLUDING sy-repid number.
PROCESS AFTER INPUT.
MODULE cancel AT EXIT-COMMAND.
CALL SUBSCREEN area.
MODULE user_command_0100.
look at the below link
http://help.sap.com/saphelp_nw2004s/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/content.htm
Regards
Sudheer -
Last_page button is not working in table control-urgent
hi all,
iam displaying the data in table control.in my pf-status i have first_page,next_page,prev_page and last_page.out of 4 buttons 3 buttons are working finr except last_page. any body can send me the code for this program.iam sending my program below.
REPORT ZMAHI_TABLE_CONTROL .
TABLES : VBAK,VBAP.
DATA : BEGIN OF ITAB OCCURS 0,
VBELN TYPE VBAK-VBELN,
ERDAT TYPE VBAK-ERDAT,
ERNAM TYPE VBAK-ERNAM,
ERZET TYPE VBAK-ERZET,
REASON(40) TYPE C,
END OF ITAB.
DATA : FILL TYPE I VALUE 1.
DATA : N TYPE I .
DATA : BEGIN OF XVALUES OCCURS 50,
BUTXT LIKE T001-BUTXT,
END OF XVALUES.
DATA : BEGIN OF XFIELDS OCCURS 50.
INCLUDE STRUCTURE HELP_VALUE.
DATA : END OF XFIELDS.
DATA : BEGIN OF SEL_VAL OCCURS 50.
INCLUDE STRUCTURE HELP_VTAB.
DATA : END OF SEL_VAL.
TABLE CONTROL DECLARATIONS------
CONTROLS : CONTROL_DATA TYPE TABLEVIEW USING SCREEN '100'.
DATA : OK_CODE TYPE SY-UCOMM,
LIN TYPE I,
LIN1 TYPE I,
LIN2 TYPE I,
LIN3 TYPE I.
DATA: LINES TYPE I,
LIMIT TYPE I VALUE 1.
DATA : LINE_COUNT TYPE I,
LINEI TYPE I,
LINEJ TYPE I,
LINE1 TYPE I,
LINE2 TYPE I,
LN1 TYPE I.
SELECTION-SCREEN : BEGIN OF BLOCK B1.
SELECT-OPTIONS : P_VBELN FOR VBAK-VBELN.
SELECTION-SCREEN : END OF BLOCK B1.
START-OF-SELECTION.
SELECT VBELN
ERDAT
ERNAM
ERZET
FROM VBAK
INTO TABLE ITAB
WHERE VBELN IN P_VBELN.
CALL SCREEN 100.
*& Module F4_HELP INPUT
MODULE F4_HELP INPUT.
FREE : XFIELDS,SEL_VAL,XVALUES.
MOVE : 'ZMAHI' TO XFIELDS-TABNAME,
'REASON' TO XFIELDS-FIELDNAME,
'X' TO XFIELDS-SELECTFLAG.
APPEND XFIELDS.
XVALUES = 'Non Trade F&F'.
APPEND XVALUES .
XVALUES = 'Non Trade Retention'.
APPEND XVALUES .
XVALUES = 'Oldbills Accnt cntmnt'.
APPEND XVALUES .
XVALUES = 'Non Trade Not claimed'.
APPEND XVALUES .
XVALUES = 'Non Trade Dispute'.
APPEND XVALUES .
XVALUES = 'Non Trade Payment Block'.
APPEND XVALUES .
XVALUES = 'N/T Subsntly Cleared'.
APPEND XVALUES .
XVALUES = 'N/T Unstld Advances'.
APPEND XVALUES .
XVALUES = 'N/T OThers'.
APPEND XVALUES .
XVALUES = 'Trade Non Receipt OF BOE'.
APPEND XVALUES .
XVALUES = 'Trade OEM Adjustments'.
APPEND XVALUES .
XVALUES = 'Trade Reject Of Material'.
APPEND XVALUES .
XVALUES = 'Trade NOt Claimed'.
APPEND XVALUES .
XVALUES = 'Trade Dispute'.
APPEND XVALUES .
XVALUES = 'Trade Payment BLock'.
APPEND XVALUES .
XVALUES = 'Trade Subsntly Cleared'.
APPEND XVALUES .
XVALUES = 'Trade Non Submission of bills'.
APPEND XVALUES .
XVALUES = 'Trade others'.
APPEND XVALUES .
CALL FUNCTION 'HELP_VALUES_GET_WITH_TABLE_EXT'
EXPORTING
CUCOL = 0
CUROW = 0
DISPLAY = ' '
FIELDNAME = 'REASON'
TABNAME = 'ZIFIOD011'
IMPORTING
SELECT_VALUE = ITAB-REASON
TABLES
FIELDS = XFIELDS
SELECT_VALUES = SEL_VAL
VALUETAB = XVALUES.
ENDMODULE. " F4_HELP INPUT
*& Module STATUS_0100 OUTPUT
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS '0100'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'CANCEL' OR 'EXIT' OR 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'NEXT_LINE'.
CONTROL_DATA-top_line = CONTROL_DATA-top_line + 1.
limit = fill - lines + 1.
IF CONTROL_DATA-top_line > limit.
CONTROL_DATA-top_line = limit.
ENDIF.
WHEN 'PREV_LINE'.
CONTROL_DATA-top_line = CONTROL_DATA-top_line - 1.
IF CONTROL_DATA-top_line < 0.
CONTROL_DATA-top_line = 0.
ENDIF.
WHEN 'NEXT_PAGE'.
CONTROL_DATA-TOP_LINE = CONTROL_DATA-TOP_LINE + LINES.
LIMIT = LIMIT + 1.
CONTROL_DATA-TOP_LINE = LIMIT.
WHEN 'PREV_PAGE'.
CONTROL_DATA-TOP_LINE = CONTROL_DATA-TOP_LINE - LINES.
LIMIT = LIMIT - 1.
CONTROL_DATA-TOP_LINE = LIMIT.
WHEN 'LAST_PAGE'.
CONTROL_DATA-TOP_LINE = FILL - LINES + 1.
WHEN 'FIRST_PAGE'.
CONTROL_DATA-TOP_LINE = 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module SCROLL_BAR INPUT
MODULE SCROLL_BAR INPUT.
DESCRIBE TABLE ITAB LINES CONTROL_DATA-LINES.
ENDMODULE. " SCROLL_BAR INPUT
thanks,
maheedhar.THi Ravi,
The code which u sent to me is not working for next page and previous page.
can u plz resend me the code.
iam sending my code below.
REPORT ZMAHI_TABLE_CONTROL .
TABLES : VBAK,VBAP.
DATA : BEGIN OF ITAB OCCURS 0,
VBELN TYPE VBAK-VBELN,
ERDAT TYPE VBAK-ERDAT,
ERNAM TYPE VBAK-ERNAM,
ERZET TYPE VBAK-ERZET,
REASON(40) TYPE C,
END OF ITAB.
DATA : FILL TYPE I VALUE 1.
DATA : N TYPE I .
DATA : BEGIN OF XVALUES OCCURS 50,
BUTXT LIKE T001-BUTXT,
END OF XVALUES.
DATA : BEGIN OF XFIELDS OCCURS 50.
INCLUDE STRUCTURE HELP_VALUE.
DATA : END OF XFIELDS.
DATA : BEGIN OF SEL_VAL OCCURS 50.
INCLUDE STRUCTURE HELP_VTAB.
DATA : END OF SEL_VAL.
TABLE CONTROL DECLARATIONS------
CONTROLS : CONTROL_DATA TYPE TABLEVIEW USING SCREEN '100'.
DATA : OK_CODE TYPE SY-UCOMM,
LIN TYPE I,
LIN1 TYPE I,
LIN2 TYPE I,
LIN3 TYPE I.
DATA: LINES TYPE I,
LIMIT TYPE I VALUE 1.
DATA : LINE_COUNT TYPE I,
LINEI TYPE I,
LINEJ TYPE I,
LINE1 TYPE I,
LINE2 TYPE I,
LN1 TYPE I.
SELECTION-SCREEN : BEGIN OF BLOCK B1.
SELECT-OPTIONS : P_VBELN FOR VBAK-VBELN.
SELECTION-SCREEN : END OF BLOCK B1.
START-OF-SELECTION.
SELECT VBELN
ERDAT
ERNAM
ERZET
FROM VBAK
INTO TABLE ITAB
WHERE VBELN IN P_VBELN.
CALL SCREEN 100.
*& Module F4_HELP INPUT
MODULE F4_HELP INPUT.
FREE : XFIELDS,SEL_VAL,XVALUES.
MOVE : 'ZMAHI' TO XFIELDS-TABNAME,
'REASON' TO XFIELDS-FIELDNAME,
'X' TO XFIELDS-SELECTFLAG.
APPEND XFIELDS.
XVALUES = 'Non Trade F&F'.
APPEND XVALUES .
XVALUES = 'Non Trade Retention'.
APPEND XVALUES .
XVALUES = 'Oldbills Accnt cntmnt'.
APPEND XVALUES .
XVALUES = 'Non Trade Not claimed'.
APPEND XVALUES .
XVALUES = 'Non Trade Dispute'.
APPEND XVALUES .
XVALUES = 'Non Trade Payment Block'.
APPEND XVALUES .
XVALUES = 'N/T Subsntly Cleared'.
APPEND XVALUES .
XVALUES = 'N/T Unstld Advances'.
APPEND XVALUES .
XVALUES = 'N/T OThers'.
APPEND XVALUES .
XVALUES = 'Trade Non Receipt OF BOE'.
APPEND XVALUES .
XVALUES = 'Trade OEM Adjustments'.
APPEND XVALUES .
XVALUES = 'Trade Reject Of Material'.
APPEND XVALUES .
XVALUES = 'Trade NOt Claimed'.
APPEND XVALUES .
XVALUES = 'Trade Dispute'.
APPEND XVALUES .
XVALUES = 'Trade Payment BLock'.
APPEND XVALUES .
XVALUES = 'Trade Subsntly Cleared'.
APPEND XVALUES .
XVALUES = 'Trade Non Submission of bills'.
APPEND XVALUES .
XVALUES = 'Trade others'.
APPEND XVALUES .
CALL FUNCTION 'HELP_VALUES_GET_WITH_TABLE_EXT'
EXPORTING
CUCOL = 0
CUROW = 0
DISPLAY = ' '
FIELDNAME = 'REASON'
TABNAME = 'ZIFIOD011'
IMPORTING
SELECT_VALUE = ITAB-REASON
TABLES
FIELDS = XFIELDS
SELECT_VALUES = SEL_VAL
VALUETAB = XVALUES.
ENDMODULE. " F4_HELP INPUT
*& Module STATUS_0100 OUTPUT
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS '0100'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'CANCEL' OR 'EXIT' OR 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'NEXT_LINE'.
CONTROL_DATA-top_line = CONTROL_DATA-top_line + 1.
limit = fill - lines + 1.
IF CONTROL_DATA-top_line > limit.
CONTROL_DATA-top_line = limit.
ENDIF.
WHEN 'PREV_LINE'.
CONTROL_DATA-top_line = CONTROL_DATA-top_line - 1.
IF CONTROL_DATA-top_line < 0.
CONTROL_DATA-top_line = 0.
ENDIF.
WHEN 'NEXT_PAGE'.
CONTROL_DATA-TOP_LINE = CONTROL_DATA-TOP_LINE + LINES.
LIMIT = LIMIT + 1.
CONTROL_DATA-TOP_LINE = LIMIT.
WHEN 'PREV_PAGE'.
CONTROL_DATA-TOP_LINE = CONTROL_DATA-TOP_LINE - LINES.
LIMIT = LIMIT - 1.
CONTROL_DATA-TOP_LINE = LIMIT.
WHEN 'LAST_PAGE'.
DESCRIBE TABLE ITAB LINES LIMIT.
CONTROL_DATA-TOP_LINE = LIMIT.
WHEN 'FIRST_PAGE'.
CONTROL_DATA-TOP_LINE = 0.
WHEN 'P--'.
CLEAR ok_code.
PERFORM paging USING 'P--'.
WHEN 'P-'.
CLEAR ok_code.
PERFORM paging USING 'P-'.
WHEN 'P+'.
CLEAR ok_code.
PERFORM paging USING 'P+'.
WHEN 'P++'.
CLEAR ok_code.
PERFORM paging USING 'P++'.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module SCROLL_BAR INPUT
MODULE SCROLL_BAR INPUT.
DESCRIBE TABLE ITAB LINES CONTROL_DATA-LINES.
ENDMODULE. " SCROLL_BAR INPUT
*& Form paging
text
-->P_0356 text
*FORM paging USING VALUE(P_0356).
FORM paging USING code.
DATA: i TYPE i,
j TYPE i.
CASE code.
WHEN 'P--'.
CONTROL_DATA-top_line = 1.
WHEN 'P-'.
CONTROL_DATA-top_line = CONTROL_DATA-top_line - line_count.
IF CONTROL_DATA-top_line LE 0.
CONTROL_DATA-top_line = 1.
ENDIF.
WHEN 'P+'.
i = CONTROL_DATA-top_line + line_count.
j = CONTROL_DATA-lines - line_count + 1.
IF j LE 0. j = 1. ENDIF.
IF i LE j.
CONTROL_DATA-top_line = i.
ELSE.
CONTROL_DATA-top_line = j.
ENDIF.
WHEN 'P++'.
CONTROL_DATA-top_line = CONTROL_DATA-lines - line_count + 1.
IF CONTROL_DATA-top_line LE 0.
CONTROL_DATA-top_line = 1.
ENDIF.
ENDCASE.
ENDFORM. " PAGING
*ENDFORM. " paging
thanks,
maheedhar.t -
Not able to do page down in table control of screen
Hello,
I have created a table control on a screen of my report. This screen gets called from my selection screen. When I do page down or click on down arrow key to view other table entries nothing is happening. The scroll bar is not moving vertically.
Someone told me that no coding is required to make the table scrollable vertically.
Can someone please tell me if there is any attribute that needs to be set for this?
Best Regards,
Priyanka Gupta.Hi,
Please go through this code.
dataL line_count type i. " Global declaration
In the PAI of the table control screen.
CASE OK_CODE.
when 'P--'.
clear ok_code.
perform paging using 'P--'.
when 'P-'.
clear ok_code.
perform paging using 'P-'.
when 'P+'.
clear ok_code.
perform paging using 'P+'.
when 'P++'.
clear ok_code.
perform paging using 'P++'.
form paging using code. " NOTE : here "TABCTL" is your table control name
data: i type i,
j type i.
case code.
when 'P--'.
tabctl-top_line = 1.
when 'P-'.
tabctl-top_line = tabctl-top_line - line_count.
if tabctl-top_line le 0.
tabctl-top_line = 1.
endif.
when 'P+'.
i = tabctl-top_line + line_count.
j = tabctl-lines - line_count + 1.
if j le 0.
j = 1.
endif.
if i le j.
tabctl-top_line = i.
else.
tabctl-top_line = j.
endif.
when 'P++'.
tabctl-top_line = tabctl-lines - line_count + 1.
if tabctl-top_line le 0.
tabctl-top_line = 1.
endif.
endcase.
endform.
Hope this will help you.
Regards,
Smart Varghese -
How to make the Page UP and down work on a table control screen?
Dear all,
Can some one suggest how to make the table control screen work with Page Up and Page down controls.
when I press on Page down it works for the first time and after that i need to select the table to make it work the second time. it there a way I can make the index on the screen stay on the table control at all times.
Regard,
VjTake this code as a referance:
Sample code for vertical scrolling in PAI processing will look like this:
MODULE user_command_XXXX INPUT. (XXXX is screen no.)
CASE ok_code.
WHEN 'P--'.
CLEAR ok_code.
PERFORM paging USING 'P--'.
WHEN 'P-'.
CLEAR ok_code.
PERFORM paging USING 'P-'.
WHEN 'P+'.
CLEAR ok_code.
PERFORM paging USING 'P+'.
WHEN 'P++'.
CLEAR ok_code.
PERFORM paging USING 'P++'.
*& Form PAGING
* Form to do scrolling for screen XXXX
* -->CODE OKCODE value (P--, P-, P+, P++ )
FORM paging USING code.
DATA: i TYPE i,
j TYPE i.
CASE code.
WHEN 'P--'. <table control name>-top_line = 1.
WHEN 'P-'.
<table control name>-top_line =
<table control name>-top_line - line_count.
IF <table control name>-top_line LE 0.
<table control name>-top_line = 1.
ENDIF.
WHEN 'P+'.
i = <table control name>-top_line + line_count.
j = <table control name>-lines - line_count + 1.
IF j LE 0. j = 1. ENDIF.
IF i LE j.
<table control name>-top_line = i.
ELSE.
<table control name>-top_line = j.
ENDIF.
WHEN 'P++'.
<table control name>-top_line =
<table control name>-lines - line_count + 1.
IF <table control name>-top_line LE 0.
<table control name>-top_line = 1.
ENDIF.
ENDCASE.
ENDFORM. " PAGING
Regards,
Ravi -
hello friends,
i was informed that i would be working on table controls through dialogue program,
if any one has a sample code for tabel control through screens,
plz post it here, so that , i can understand which command is to use for what, and what would be most common commands.
thank you in advance.Hello,
Check this sample
********** Trancsaction code- zrtc **********************
*********** Default Screen- 1000 ************************
PROGRAM ZRAVI_TABLECONTROL message-id zrtc.
*Displaying data from VBAP,VBAK and VBKD tables using table control
tables : VBAP,VBAK,VBKD.
controls : tab_cntrl type tableview using screen '2000'.
data : begin of it_sales occurs 0,
vbeln like VBAP-vbeln,
matnr like VBAP-matnr,
erdat like VBAK-erdat,
ernam like VBAK-ernam,
auart like VBAK-auart,
konda like VBKD-konda,
kdgrp like VBKD-kdgrp,
end of it_sales.
data : l_count type i.
*& Module USER_COMMAND_1000 INPUT
* text
MODULE USER_COMMAND_1000 INPUT.
case sy-ucomm.
when 'SHOW'.
if VBAP-MATNR ne ''.
select vp~vbeln vp~matnr vk~erdat vk~ernam vk~auart vd~konda
vd~kdgrp into corresponding fields of table it_sales from
( ( VBAP as vp inner join VBAK as vk on vp~vbeln = vk~vbeln )
inner join VBKD as vd on vk~vbeln = vd~vbeln )
where vp~matnr = VBAP-MATNR.
else.
select vp~vbeln vp~matnr vk~erdat vk~ernam vk~auart vd~konda
vd~kdgrp into corresponding fields of table it_sales from
( ( VBAP as vp inner join VBAK as vk on vp~vbeln = vk~vbeln )
inner join VBKD as vd on vk~vbeln = vd~vbeln ).
endif.
** leave to list-processing.
** *For testing the query
** loop at it_sales.
** write : / it_sales-matnr.
** endloop.
** *End testing of query
call screen '2000'.
when 'EXIT'.
leave program.
endcase.
ENDMODULE. " USER_COMMAND_1000 INPUT
*& Module STATUS_2000 OUTPUT
* text
MODULE STATUS_2000 OUTPUT.
* SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'Sales Document Information'.
ENDMODULE. " STATUS_2000 OUTPUT
*& Module USER_COMMAND_2000 INPUT
* text
MODULE USER_COMMAND_2000 INPUT.
case sy-ucomm.
when 'BACK'.
leave to screen '1000'.
when 'P--'.
perform paging using 'P--'.
when 'P-'.
perform paging using 'P-'.
when 'P+'.
perform paging using 'P+'.
when 'P++'.
perform paging using 'P++'.
endcase.
ENDMODULE. " USER_COMMAND_2000 INPUT
*& Module GET_CTRL_SALES INPUT
* text
MODULE GET_CTRL_SALES INPUT.
case sy-ucomm.
when 'SAVE'.
data : line_count type i value 0.
modify it_sales index tab_cntrl-current_line.
line_count = line_count + 1.
* *VBAP,VBAK and VBKD tables
* vbeln like VBAP-vbeln,
* matnr like VBAP-matnr,
* erdat like VBAK-erdat,
* ernam like VBAK-ernam,
* auart like VBAK-auart,
* konda like VBKD-konda,
* kdgrp like VBKD-kdgrp,
* update VBAP set vbeln = it_sales
* if sy-subrc = 0.message i001.endif.
IF SY-SUBRC = 0 AND SY-TABIX > LINE_COUNT.
MESSAGE E001 WITH LINE_COUNT.
* STOP.
ENDIF.
*LEAVE TO LIST-PROCESSING.
*WRITE : 'TABIX',SY-INDEX,'LINE',LINE_COUNT.
endcase.
ENDMODULE. " GET_CTRL_SALES INPUT
*& Module FILL_TAB_CNTRL OUTPUT
* text
MODULE FILL_TAB_CNTRL OUTPUT.
read table it_sales index tab_cntrl-current_line.
l_count = sy-loopc.
* leave to list-processing.
* write : l_count,tab_cntrl-top_line.
if sy-subrc ne 0.exit from step-loop.endif.
ENDMODULE. " FILL_TAB_CNTRL OUTPUT
*& Module GET_MESSAGE INPUT
* text
MODULE GET_MESSAGE INPUT.
* if sy-subrc = 0.
* message i001 with line_count.
* endif.
ENDMODULE. " GET_MESSAGE INPUT
*& Form PAGING
* text
* -->P_0189 text
FORM PAGING USING code.
data : i type i,
j type i.
case code.
when 'P--'.
TAB_CNTRL-top_line = 1.
when 'P-'.
TAB_CNTRL-top_line = TAB_CNTRL-top_line - l_count.
message i001.
if TAB_CNTRL-top_line le 0.
TAB_CNTRL-top_line = 1.
endif.
when 'P+'.
i = TAB_CNTRL-top_line + l_count.
j = TAB_CNTRL-lines - l_count + 1.
if j le 0.j = 1.endif.
if i le j.
TAB_CNTRL-top_line = i.
else.
TAB_CNTRL-top_line = j.
endif.
when 'P++'.
TAB_CNTRL-top_line = TAB_CNTRL-lines - l_count + 1.
if TAB_CNTRL-top_line le 0.
TAB_CNTRL-top_line = 1.
endif.
endcase.
ENDFORM. " PAGING
*& Module INIT_CONTROL OUTPUT
* text
MODULE INIT_CONTROL OUTPUT.
TAB_CNTRL-top_line = 1.
ENDMODULE. " INIT_CONTROL OUTPUT
********************** flow logic of screen 2000 ********************
PROCESS BEFORE OUTPUT.
MODULE STATUS_2000.
module init_control.
loop with control tab_cntrl.
module fill_tab_cntrl.
endloop.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_2000.
loop with control tab_cntrl.
field SEL module get_ctrl_sales on input.
endloop.
*module get_message.
******************** End of flow logic ************************
If useful reward.
VAsanth -
Able to traverse other schema in Table Dictionary?!
Hi,
I am working in apex.oracle.com.
Workspace: LOGICA277730 User: [email protected]
Page: Home > SQL Workshop > Utilities > User Interface Defaults > Table Dictionary
I have synchonized the defaults.
I click a table to edit it's UI defaults.
When finished, I click the "*Prev*" or "*Next*" button that are at the right of the "Edit Table Defaults"-button and then ... I get in a different schema... When I click the "Edit Table Defaults"-button I get to the page:
Home > SQL Workshop > Utilities > User Interface Defaults > Table Dictionary > Table and Column Properties > Table Defaults
And there I see the table defautls of:
Schema: DATAMINE
Object Name: COMPANYCASH
Is this a bug?Hi,
Please go through this code.
dataL line_count type i. " Global declaration
In the PAI of the table control screen.
CASE OK_CODE.
when 'P--'.
clear ok_code.
perform paging using 'P--'.
when 'P-'.
clear ok_code.
perform paging using 'P-'.
when 'P+'.
clear ok_code.
perform paging using 'P+'.
when 'P++'.
clear ok_code.
perform paging using 'P++'.
form paging using code. " NOTE : here "TABCTL" is your table control name
data: i type i,
j type i.
case code.
when 'P--'.
tabctl-top_line = 1.
when 'P-'.
tabctl-top_line = tabctl-top_line - line_count.
if tabctl-top_line le 0.
tabctl-top_line = 1.
endif.
when 'P+'.
i = tabctl-top_line + line_count.
j = tabctl-lines - line_count + 1.
if j le 0.
j = 1.
endif.
if i le j.
tabctl-top_line = i.
else.
tabctl-top_line = j.
endif.
when 'P++'.
tabctl-top_line = tabctl-lines - line_count + 1.
if tabctl-top_line le 0.
tabctl-top_line = 1.
endif.
endcase.
endform.
Hope this will help you.
Regards,
Smart Varghese -
Does anybody know one type: CX_TABLEVIEW?
I have use this type in table control process:
<i><i>FORM paging USING p_control TYPE cx_tableview
p_code TYPE syucomm
p_loopc TYPE syloopc.
FIELD-SYMBOLS <tbctrl> TYPE cx_tableview.
ASSIGN p_control TO <tbctrl>.
CASE p_code.
WHEN 'PGTP'.
<tbctrl>-top_line = 1.
WHEN 'PGUP'.
<tbctrl>-top_line = <tbctrl>-top_line - loopc + 1.
IF <tbctrl>-top_line LE 0.
<tbctrl>-top_line = 1.
ENDIF.
WHEN 'PGDN'.
<tbctrl>-top_line = <tbctrl>-top_line + loopc - 1.
IF <tbctrl>-top_line GE <tbctrl>-lines.
<tbctrl>-top_line = <tbctrl>-lines.
ENDIF.
WHEN 'PGBT'.
<tbctrl>-top_line = <tbctrl>-lines.
ENDCASE.
ENDFORM. " paging</i></i>
But I cannot find this type from ABAP dictionary. I guess this type is the same with CXTAB_CONTROL. Anyway, is it still work in future version? Thanks
BR
MadI checked the help and this is what I found out, however when I tried to find out <b>CXTAB_CONTROL</b> in SE11.
For a description of individual components of the structure CXTAB_CONTROL, refer to:
Table Controls in ABAP Programs
When displaying the control, the system uses the current contents at the time when all PBO modules have run. The modified values (changed by the user on the screen) are set directly before the first PAI is called.
Hope this helps
Regards,
Subramanian V. -
hi
i want to display output on table control, how to do this.Hello,
Check this sample
********** Trancsaction code- zrtc **********************
*********** Default Screen- 1000 ************************
PROGRAM ZRAVI_TABLECONTROL message-id zrtc.
*Displaying data from VBAP,VBAK and VBKD tables using table control
tables : VBAP,VBAK,VBKD.
controls : tab_cntrl type tableview using screen '2000'.
data : begin of it_sales occurs 0,
vbeln like VBAP-vbeln,
matnr like VBAP-matnr,
erdat like VBAK-erdat,
ernam like VBAK-ernam,
auart like VBAK-auart,
konda like VBKD-konda,
kdgrp like VBKD-kdgrp,
end of it_sales.
data : l_count type i.
*& Module USER_COMMAND_1000 INPUT
* text
MODULE USER_COMMAND_1000 INPUT.
case sy-ucomm.
when 'SHOW'.
if VBAP-MATNR ne ''.
select vp~vbeln vp~matnr vk~erdat vk~ernam vk~auart vd~konda
vd~kdgrp into corresponding fields of table it_sales from
( ( VBAP as vp inner join VBAK as vk on vp~vbeln = vk~vbeln )
inner join VBKD as vd on vk~vbeln = vd~vbeln )
where vp~matnr = VBAP-MATNR.
else.
select vp~vbeln vp~matnr vk~erdat vk~ernam vk~auart vd~konda
vd~kdgrp into corresponding fields of table it_sales from
( ( VBAP as vp inner join VBAK as vk on vp~vbeln = vk~vbeln )
inner join VBKD as vd on vk~vbeln = vd~vbeln ).
endif.
** leave to list-processing.
** *For testing the query
** loop at it_sales.
** write : / it_sales-matnr.
** endloop.
** *End testing of query
call screen '2000'.
when 'EXIT'.
leave program.
endcase.
ENDMODULE. " USER_COMMAND_1000 INPUT
*& Module STATUS_2000 OUTPUT
* text
MODULE STATUS_2000 OUTPUT.
* SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'Sales Document Information'.
ENDMODULE. " STATUS_2000 OUTPUT
*& Module USER_COMMAND_2000 INPUT
* text
MODULE USER_COMMAND_2000 INPUT.
case sy-ucomm.
when 'BACK'.
leave to screen '1000'.
when 'P--'.
perform paging using 'P--'.
when 'P-'.
perform paging using 'P-'.
when 'P+'.
perform paging using 'P+'.
when 'P++'.
perform paging using 'P++'.
endcase.
ENDMODULE. " USER_COMMAND_2000 INPUT
*& Module GET_CTRL_SALES INPUT
* text
MODULE GET_CTRL_SALES INPUT.
case sy-ucomm.
when 'SAVE'.
data : line_count type i value 0.
modify it_sales index tab_cntrl-current_line.
line_count = line_count + 1.
* *VBAP,VBAK and VBKD tables
* vbeln like VBAP-vbeln,
* matnr like VBAP-matnr,
* erdat like VBAK-erdat,
* ernam like VBAK-ernam,
* auart like VBAK-auart,
* konda like VBKD-konda,
* kdgrp like VBKD-kdgrp,
* update VBAP set vbeln = it_sales
* if sy-subrc = 0.message i001.endif.
IF SY-SUBRC = 0 AND SY-TABIX > LINE_COUNT.
MESSAGE E001 WITH LINE_COUNT.
* STOP.
ENDIF.
*LEAVE TO LIST-PROCESSING.
*WRITE : 'TABIX',SY-INDEX,'LINE',LINE_COUNT.
endcase.
ENDMODULE. " GET_CTRL_SALES INPUT
*& Module FILL_TAB_CNTRL OUTPUT
* text
MODULE FILL_TAB_CNTRL OUTPUT.
read table it_sales index tab_cntrl-current_line.
l_count = sy-loopc.
* leave to list-processing.
* write : l_count,tab_cntrl-top_line.
if sy-subrc ne 0.exit from step-loop.endif.
ENDMODULE. " FILL_TAB_CNTRL OUTPUT
*& Module GET_MESSAGE INPUT
* text
MODULE GET_MESSAGE INPUT.
* if sy-subrc = 0.
* message i001 with line_count.
* endif.
ENDMODULE. " GET_MESSAGE INPUT
*& Form PAGING
* text
* -->P_0189 text
FORM PAGING USING code.
data : i type i,
j type i.
case code.
when 'P--'.
TAB_CNTRL-top_line = 1.
when 'P-'.
TAB_CNTRL-top_line = TAB_CNTRL-top_line - l_count.
message i001.
if TAB_CNTRL-top_line le 0.
TAB_CNTRL-top_line = 1.
endif.
when 'P+'.
i = TAB_CNTRL-top_line + l_count.
j = TAB_CNTRL-lines - l_count + 1.
if j le 0.j = 1.endif.
if i le j.
TAB_CNTRL-top_line = i.
else.
TAB_CNTRL-top_line = j.
endif.
when 'P++'.
TAB_CNTRL-top_line = TAB_CNTRL-lines - l_count + 1.
if TAB_CNTRL-top_line le 0.
TAB_CNTRL-top_line = 1.
endif.
endcase.
ENDFORM. " PAGING
*& Module INIT_CONTROL OUTPUT
* text
MODULE INIT_CONTROL OUTPUT.
TAB_CNTRL-top_line = 1.
ENDMODULE. " INIT_CONTROL OUTPUT
********************** flow logic of screen 2000 ********************
PROCESS BEFORE OUTPUT.
MODULE STATUS_2000.
module init_control.
loop with control tab_cntrl.
module fill_tab_cntrl.
endloop.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_2000.
loop with control tab_cntrl.
field SEL module get_ctrl_sales on input.
endloop.
*module get_message.
******************** End of flow logic ************************
If useful reward.
VAsanth -
Is there a way to prevent a form user from paging up and down or scrolling through a form?
I'm using Livecycle Designer 8.0. I'm working on a registration form (it's set up like a survey). As users respond to questions, they will be sent to the appropriate next page in the form. In doing so, they will bypass certain pages. However, if users decide to scroll through the document, or page up or down, it will take them to pages that will not be appropriate given their initial responses. In some cases, it will appear that they are responding to the same question.
This was asked before and the answer seemed to be that this is not possible to do. However, it's been a year or two since then. It is my hope that the version I'm using now allows this.
Thank you in advance for any help you can offer.In this case, you do not want someone (whoever they are DBA etc) to connect as that
particuler user to change the password.Yes, but I wouldn't expect the users to[i] know that password. The connnect would be handled automatically, behind the scenes.
The clear implication of the OP's question and response was that users would not be allowed to change their own passwords. I'm guessing this is in response to a policy that says users mustn't have simple passwords like 123abc or mom. In such a scenario a better approach would be to apply regexp to a user's password to ensure it contains a mix of letters, numbers, punctuation, etc to achieve the desired level of complexity.
So questions, should not be regarded as daft Agreed, but the same is unfortunately not always true of business decisions. As the OP has told us not to ask we cannot know why they want to do this. Personally, I think a user's individual password should always be their responsibility; anything else strikes me as insecure. YMMV.
Cheers, APC -
JMS paging store - what is difference between bytes and messages threshholds?
You can activate and configure both "bytes paging" and "message paging". What
is the difference? Why use one or the other or are both required?
Thanks,
John
Hi Mr. Black,
Cool name.
Message paging is based on number of messages. Bytes paging is based
on the size of message payload (properties, body, corr-id, and type),
where the payload does not include the header size. One can set
either or both -- if both are set, paging kicks in as soon
as the first threshhold is reached.
As for which one to use, you may wish to set both. The former
accounts for large numbers of small messages, and the latter
handles large messages. (eg 1000 small 10 byte messages
will charge 10,000 bytes toward quota but actually use up
128,000 bytes of JVM memory once the header is thrown in...)
Tom
John Black wrote:
> You can activate and configure both "bytes paging" and "message
paging". What
> is the difference? Why use one or the other or are both required?
>
> Thanks,
> John
-
hi friends i am using third party tool (i.e jsptag) for paging
it is displaying first page properly..
but i when i click previous or next any page's then it is not working
and here is my code
<%@ page session="false" %>
<%@ taglib uri="http://jsptags.com/tags/navigation/pager" prefix="pg" %>
<%@ page import="tauvex.*;" %>
<%@ page import="java.util.*;" %>
<html>
<head>
<title>Pager Tag Library Demo</title>
<style type="text/css">
A.nodec { text-decoration: none; }
</style>
</head>
<body bgcolor="#ffffff">
<%
String style = getParam(request, "style", "simple");
String position = getParam(request, "position", "top");
String index = getParam(request, "index", "center");
int maxPageItems = getParam(request, "maxPageItems", 10);
int maxIndexPages = getParam(request, "maxIndexPages", 10);
TauvexData elem=new TauvexData();
List myDataList=(List)request.getAttribute("myDataList");
%>
<form action="<%= request.getRequestURI() %>" method="get">
<center>
<table border="0" width="90%" cellpadding="4">
<tr valign="top">
<input type="submit" value="Update">
</tr>
<tr>
<td colspan="2" align="center" valign="top">
<table border="0" cellspacing="2" cellpadding="0">
<tr><td>Max. Page Items </td>
<td><input type="text" size="4" name="maxPageItems" value="<%= maxPageItems %>" onChange="this.form.submit();"></td></tr>
<tr><td>Max. Index Pages </td>
<td><input type="text" size="4" name="maxIndexPages" value="<%= maxIndexPages %>" onChange="this.form.submit();"></td></tr>
</table>
</td>
</tr>
</table>
<pg:pager
items="<%= myDataList.size() %>"
index="<%= index %>"
maxPageItems="<%= maxPageItems %>"
maxIndexPages="<%= maxIndexPages %>"
isOffset="<%= true %>"
export="offset,currentPageNumber=pageNumber"
scope="request">
<%-- keep track of preference --%>
<pg:param name="yahoo"/>
<pg:param name="both"/>
<pg:param name="center"/>
<pg:param name="maxPageItems"/>
<pg:param name="maxIndexPages"/>
<%-- save pager offset during form changes --%>
<input type="hidden" name="pager.offset" value="<%= offset %>">
<%-- warn if offset is not a multiple of maxPageItems --%>
<% if (offset.intValue() % maxPageItems != 0 &&
("alltheweb".equals(style) || "lycos".equals(style)) )
%>
<p>Warning: The current page offset is not a multiple of Max. Page Items.
<br>Please
<pg:first><a href="<%= pageUrl %>">return to the first page</a></pg:first>
if any displayed range numbers appear incorrect.</p>
<% } %>
<%-- the pg:pager items attribute must be set to the total number of
items for index before items to work properly --%>
<% { %>
<br>
<pg:index>
<% if ("yahoo".equals("yahoo")) { %>
<jsp:include page="/WEB-INF/jsp/yahoo.jsp" flush="true"/>
<% } %>
</pg:index>
<% } %>
<hr>
<table width="90%" cellspacing="4" cellpadding="4">
<%--
Since the data source is static, it's easy to offset and limit the
loop for efficiency. If the data set size is not known or cannot
be easily offset, the pager tag library can count the items and display
the correct subset for you.
The following is an example using an enumeration data source of
unknown size. The pg:pager items and isOffset attributes must
not be set for this example:
<% while (enumeration.hasMoreElements()) { %>
<pg:item><%= enumeration.nextElement() %><br></pg:item>
<% } %>
--%>
<%
//Iterator iterator = myDataList.iterator();
for (int i = offset.intValue(),
l =myDataList.size();
i < l; i++)
{ %>
<pg:item>
<% elem = (TauvexData)myDataList.get(i);
out.println("<tr>");
out.println("<td> "+elem.Fitsfilename+" </td>");
out.println("<td> "+elem.RA_START+" </td>");
out.println("<td> "+elem.RA_END+"</td>");
out.println("<td> "+elem.DEC_START+" </td>");
out.println("<td> "+elem.DEC_END+" </td>");
out.println("<td> "+elem.telescope+" </td>");
out.println("<td> "+elem.STARTOBS+" </td>");
out.println(" <td> "+elem.ENDOBS+" </td>");
out.println("<td> "+elem.FILTER+" </td>");
out.println("</tr>");
%>
</pg:item>
<%}%>
</table>
<hr>
<pg:index>
<jsp:include page="/WEB-INF/jsp/yahoo.jsp" flush="true"/>
<pg:first>
<a href="<%= pageUrl %>">[ (<%= pageNumber %>) |< Previous ]</a>
</pg:first>
<pg:prev>
<a href="<%= pageUrl %>">[ (<%= pageNumber %>) << Previous ]</a>
</pg:prev>
<pg:pages>
<a href="<%= pageUrl %>"><%= pageNumber %></a>
</pg:pages>
<pg:next>
<a href="<%= pageUrl %>">[ Next >> (<%= pageNumber %>) ]</a>
</pg:next>
<pg:last>
<a href="<%= pageUrl %>">[ Last >| (<%= pageNumber %>) ]</a>
</pg:last>
</pg:index>
</pg:pager>
</center>
</body>
</html>
<%!
private static final String getParam(ServletRequest request, String name,
String defval)
String param = request.getParameter(name);
return (param != null ? param : defval);
private static final int getParam(ServletRequest request, String name,
int defval)
String param = request.getParameter(name);
int value = defval;
if (param != null) {
try { value = Integer.parseInt(param); }
catch (NumberFormatException ignore) { }
return value;
%>
plz check out the tags syntax..
i am trying to solve it from few days but i didnt
plz or if u have any sample code, then it will be really helpfull for me.
i appreaciate ur prompt reply
thanks in advanceI suggest you to use JSTL it is much more easier.
Here is some example:
Paging.tag
<%@ tag body-content="empty" %>
<%@ taglib uri="/WEB-INF/tld/struts-bean.tld" prefix="bean"%>
<%@ taglib uri="/WEB-INF/tld/struts-html.tld" prefix="html"%>
<%@ taglib uri="/WEB-INF/tld/struts-logic.tld" prefix="logic"%>
<%@ taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c"%>
<%@ attribute name="action" required="true" %>
<!-- TODO:karel: remove urlAppend -->
<%@ attribute name="urlAppend" required="true" %>
<%@ attribute name="listForm" required="true" type="java.lang.Object" %>
<%@ taglib prefix="om" tagdir="/WEB-INF/tags/om"%>// your tag lib!!!!!!!
<c:set var="prevUrl">${action}.do?${listForm.parameterString}&page=${listForm.page-1}</c:set>
<c:set var="nextUrl">${action}.do?${listForm.parameterString}&page=${listForm.page+1}</c:set>
<c:set var="hasPrev" value="${listForm.page > 0}"/>
<c:set var="hasNext" value="${!listForm.lastPage}"/>
<tr>
<td colspan="20">
<om:button-link href="${prevUrl}" key="paging.prev" disabled="${!hasPrev}" className="paging-button${hasPrev?'-active':''}"/>
<input type="button" disabled="true" value=" ${listForm.page+1} / ${listForm.noRow}" />
<om:button-link href="${nextUrl}" key="paging.next" disabled="${!hasNext}" className="paging-button${hasNext?'-active':''}"/>
</td>
</tr>and add this code where you need in jsp
<om:paging action="formAction" urlAppend="${urlAppend}" listForm="${listForm}" /> -
Forms 10g installed and running on Windows Vista
<font color=0000FF>Update 12-Dec-2008: </font>Oracle has published NOTE 559067.1 -- How to Install Developer Suite 10.1.2.0.2 - hence 10.1.2.3 - on Windows Vista, 24-OCT-2008 with some installation help.
<font color=0000FF>Update 07-July-2008: </font> Added text at the bottom showing how to find patchsets for Forms 10g.
<font color=0000FF>Update 29-May-2008: </font> This thread was started in November, 2007. In January, 2008, Oracle released Patch 3 for Forms 10g, which makes Forms 10g compatible with Windows Vista. As time permits I'll try to keep the information in this post up to date. Updated information will be inserted <font color=0000FF>as blue text.
</font>
<font color=0000FF>Original message begins here:</font>
This is a second thread I am posting to outline the steps I have used to install Forms on a Windows Vista Home Basic laptop. The other thread describes installing Forms 6i:
Forms 6i installed and running on Windows Vista
Please read through the initial part of that post for the background. I realize Oracle has not certified Forms 10g to run on Vista, but the time has come for my associates and I to upgrade our old computers to new desktop/laptop platforms, and I would hate to acquire XP machines and be stuck with them for the next 5 years. <font color=0000FF>(Note: Since first posting this message, Oracle has certified Forms 10g Patch 3 (version 10.1.2.3.0) to run on Vista)</font> So after another person informed me that he had Forms installed and running on Vista, I went ahead and bought one. I found that as long as I set the compatibility mode to run Forms programs as Windows XP (and a few other changes), Forms 6i and 10g run quite satisfactorily.
<font color=0000FF>Update 29-Jan-2008: </font> Unfortunately, it turns out that the Forms 10g Builder running on Vista <font color=0000FF>had</font> a major flaw: If you try to develop a form, the Builder will crash if you try to compile a procedure that calls another procedure in the form that has errors. The problem is reported and described in this thread: Error compiling a form under Vista
<font color=0000FF>Update 12-Mar-2008: </font> Installing Patch 3 on Vista does not help with this problem -- the Builder still crashes in the same situation.
<font color=0000FF>Update 25-July-2008: </font> Applying Patch 7047034 has corrected the problem. See this link within this thread: Forms 10g: Installing Patch 7047034 on Windows Vista
Webutil note: I am stuck in a Forms 6i client/server world, so all my forms must run in that environment. Therefore I have not used any Webutil software, and I do not know whether that part will run under Vista.
Internet Explorer note: On Windows Vista, IE CANNOT be used to run the Web Forms runtime. It crashes immediately when you try to run a form. Instead, I can use either Firefox (Firefox 2, Firefox 3.0 Crashes with Forms 10g) or Netscape, as long as they are set to disable java. <font color=0000FF>[ Correction: IE7 on Vista now runs the Forms 10g forms. You just need to add "?config=jpi" to the browser URL when starting the Web Forms session. More IE/Vista info: [url=http://forums.oracle.com/forums/thread.jspa?threadID=642973]Vista JInitiator Problem ]</font>
The Oracle Developer Suite download page:
http://www.oracle.com/technology/software/products/ids/index.html
Oracle Developer Suite Installation Guide:
http://download.oracle.com/docs/cd/B25016_07//doc/dl/core/B16012_04/toc.htm
The steps below are those I followed to install Forms 10g (version 10.1.2.0.2)
I. Preliminary system changes in Windows
When I started installing, I got the following error message: Install has encountered an error while
attempting to verify your virtual memory settings.
Please verify that the sum of the initial sizes of
the paging files is at least 256 MB.To fix this: Go to Control Panel, System and Maintenance, View amount of RAM and processor speed (under "System"),
Advanced system settings (in left "Tasks" column), Advanced tab, Settings (under "performance"), Advanced tab:
Virtual Memory shows a "Total paging file size for all drives: 2337MB.
Click "change", Uncheck "Automatically manage paging file size for all drives"
Click "custom size:", set Initial size to: 2048, Max to 4096
Click set button, then OK, get message:The changes you have made require you to restart your computer before
they can take effect.Restart the computer.
II. Installing Forms 10g
1. Download two files from Oracle:
ds_windows_x86_101202_disk1.zip (626,122,752 bytes)
ds_windows_x86_101202_disk2.zip (236,880,881 bytes)
2a. Before extracting, it is a good idea to shut down any virus protection software. It can sometimes prevent some files from being created.
2b. Extract both into the C:\oracle directory, as disk1 and disk2.
3. Using Windows Explorer, change the properties of setup.exe in the C:\oracle\disk1 folder. (In windows explorer, right click, properties, Compatibility tab.) Change the compatibility to run as Windows XP (Service Pack 2).
4. Right click setup.exe and click "Run as administrator"
5. Select "Installation type" = Complete (1.11 GB)
6. Received this message:Windows Firewall has blocked this program from
accepting incoming network connections. If you
unblock this program, it will be unblocked on all
public networks that you connect to.
C:\users\steve\appdata\local\temp\orainstall...
2007-10-29_11-59-08am\jre\1.4.2\bin\javaw.exeI clicked "Unblock"
7. Received this message: "Provide outgoing mail server information" I entered the smtp mail server that I use.
8. A summary screen displayed showing 274 products under New Installations.
I clicked the Install button.
9. Received this message: You can find a log of this install session at:
C:\Program Files\Oracle\Inventory\logs\installActions2007.....log
10. The installation completed. Installed products shows Forms 10.1.2.0.2
III. After the install completed
1. Create a shortcut to the Forms 10 Builder on the Desktop.
On the shortcut line, after the .exe, add *userid=userxxx/pwxxx@orcl* so Builder automatically logs into 10g database. If you do step 4 below (creating an easily-accessible folder to use for your forms) change the "Start in" path on the shortcut so it points to that folder. Otherwise, Forms Builder will not find referenced objects and PLL libraries when it opens a form. Also do the same on the Start, All Programs shortcut for the Forms Builder.
Edit: After applying Patch 3, the following steps are not necessary.
Set its compatibility to Windows XP.
Set checkbox: "Run this program as as an administrator." (Without this, FormBuilder will NOT open a PLL library.)
Click the "Show settings for all users" and change values there.
2. Copy "Start OC4J Instance" icon to desktop.
Set its compatibility to Windows XP.
The first time it runs, I got a Windows popup to unblock program named Java. I clicked "Unblock".
3. tnsnames.ora:
Rename C:\oracle\DevSuiteHome_1\network\admin\tnsnames.ora
to: tnsnames_orig.ora
If you created a tnsnames.ora file for Forms 6i, just copy it to the path above. If not, do this:
Create a new tnsnames.ora file, copying entries old file on my old laptop, which contains all the connections I use.
Delete the old laptop entry, replace with new entry for the new local ORCL connection on new laptop from tnsnames file renamed from the c:\oracle\... ...\10.2.0\db_1\ path.
4. Optional: Create an easily accessible folder to store fmb files:
C:\users\steve\.1\fmb10
You don't really want to keep drilling into C:\oracle\DevSuiteHome_1\forms, and then find your .fmb file among the several dozen oracle-supplied files.
To create a folder named .1, you have to open a CMD.exe (Windows DOS) window, and type the Make Directory command:
MD .1
That will create the folder within the current directory -- mine defaults to C:\users\steve
Note: If you also need to use Forms 6i like me, DO NOT EVER open a .fmb file in the Forms 10 Builder from the Forms 6i folder. If you compile it, or even worse, save the .fmb, Forms 6i *cannot ever* access the file. Instead, always use the File Manager (Windows Explorer) to copy the fmb from the fmb6 folder into the fmb10 location.
5. Change the Forms 10g Default.env file using a text editor.
This file replaces all the settings originally written to the Windows Registry (GREAT idea, Oracle! I hate the registry.) No more Regedit. The default.env file is located at: (DevSuiteHome_1 path)\forms\server\default.env
Locate line with: FORMS_PATH= and add:
;C:\users\steve\.1\fmb10
Add a new line:
FORMS_MMAP=FALSE
The above allows compiling an fmx while the form is running.
Add a new line:
FORMS_ROWLOCK_OPTIMIZATION=FALSE
(This fixes Oracle bug number 3949854, which prevents automatic skipping if the same value is typed over another value. TAR 4806199.993 Automatic Skip failure...) See bug 4068896
Add a new Line:
FORMS_RESTRICT_ENTER_QUERY=False
This allows use of Query-Where window in enter query, after entering a colon in any input field. Without this, Forms returns FRM-40367: Invalid criteria in field nnn in example record. Oracle shut it down to prevent "sql injection" attacks.
6. Jiniator setup:
Run file jinit.exe in C:\oracle\DevSuiteHime_1\jinit\jinit.exe
It installs Jinitiator 1.3.1.22.
I installed it in C:\oracle\JInitiator 1.3.1.22\
For Firefox, make sure a copy of file \bin\NPJinit13122.dll resides in C:\Program Files\Mozilla Firefox\plugins.
For Netscape, the path is: C:\Program Files\Netscape\Navigator 9\plugins
7. Browser settings
See the note above about using Firefox 2 and not Firefox 3!
In Firefox 2 go to: Tools-> Options-> Content
Uncheck the "Enable Java" checkbox
--Firefox terminates if this is not done!
Note: After my system automatically installed updates to either java or Firefox, re-check the "Enable Java" setting. I am suspicious that one of these installs re-enables java in the browser.
Also note: some web sites cannot display properly if java is disabled. Example: U.S. time website: http://www.time.gov Use Internet Explorer to view these.
In Netscape make the same changes as Firefox. Without disabling java, it also terminates when you try to run a form.
Creating a url to use in the browser:
Try this:
http://127.0.0.1:8889/forms/frmservlet
If it does not work, change the 8889 port number as follows:
Open file: C:\oracle\DevSuiteHome_1\install\portlist.ini
Note the number in line:
Oracle Developer Suite HTTP port = 8889
Use the number as the port number.
You can also change the 127.0.0.1 to the computer name:
Control Panel, System and Maintenance, See the name of this computer (under "System"). Mine is "steve-PC"
So the alternate URL is: http://steve-PC:8889/forms/frmservlet
To try out the URL, start the OC4J instance set up above. Then start either Netscape or Firefox, and enter the URL. You should get a welcome screen.
If the above URL works, start up the Forms Builder, and open Edit, Preferences. On the General tab, uncheck the "Build before running" check box (optional). On the Runtime tab, set the "Application Server URL to the url above.
To run a real form, add this to the URL after frmservlet, (with no spaces):
?form={formname}&userid={userxxx}/{passwordyyy}@{connect-string}
but replace the parts in curly braces with the appropriate values. Example:
http://127.0.0.1:8889/forms/frmservlet?form=ABC&userid=abc123/zyx@orcl
Setting up Forms Builder to directly run a form in the browser:
Run the Forms Builder. Go to Edit, Preferences, Runtime tab.
Set the Application Server URL to:
http://127.0.0.1:8889/forms/frmservlet
(or use whatever URL string you developed above)
Set the Web Browser Location to:
"C:\Program Files\Netscape\Navigator 9\navigator.exe"
(or an equivalent to run the Firefox browser).
8. FORMSWEB.CFG file changes
The file is located at:
C:\ORA_DS_101202\DevSuiteHome_1\forms\server\formsweb.cfg
I changed the following two lines in the file, but these are my personal preferences:
separateFrame=true
lookandfeel=Generic
9. FMRWEB.RES file changes
For Oracle help: Enabling Key Mappings
The file fmrweb.res defines actions (triggers that run) when a function key is pressed while running Forms. The one released has unix-style key mapping, but I prefer keys originally mapped for Windows PC Forms users. There is a fmrpcweb.res in the same folder that can be renamed to fmrweb.res.
In the C:\oracle\DevSuiteHome_1\forms path, I renamed fmrweb.res to fmrweb_orig.res.
I have a file that I prefer to use, so I put it into the folder as fmrweb.res. The contents are listed below. It is organized so the most important keys are listed alphabetically at the top (URFD column is the sort column), followed by a group of less-important keys. These are keys that are available to users, but they either would not use, or are disabled within most forms. The URFD column in the second set starts with a hex A0 character, which is a high-order space, so collates after normal alphabetic characters. (Note: If you want to copy the text below and use it, the hex A0 character has been changed by the forum software to a space. So you would need to use a text editor with hexadecimal character capabilities to replace the space with the original character. )
My file has special keys defined for F2 (I use it for a debugging Key-F2 trigger in my forms), and a "Cursor to Home" F12 function. All the rest are pretty much the same as in the released fmrpcweb.res file, only mine are organized alphabetically on the URFD column.
The Web Forms fmrweb.res file is editable using any programming editor (NOT MS Word!!!). The old Client/Server key mapping file, fmrusw.res, could only be changed using the Oracle Terminal program (and it is a pain to use).
Here is the main part of my fmrweb.res file:#
#Jfn :Jmn: URKS :Ffn : URFD
# : : (User-readable : : (User-readable
# : : Key-sequence ) : : function description)
118 : 1 : "Shift F7" : 74 : "Clear Form"
121 : 0 : "F10" : 36 : "Commit"
117 : 0 : "F6" : 65 : "Create Record"
10 : 1 : "Shift Enter" : 82 : "Cursor to Home" # sdsu uses this
123 : 0 : "F12" : 82 : "Cursor to Home" # sdsu uses this
#: --Alt+Home works, but leaves the Action (first
#: --pull-down menu item) highlighted. Press Esc or
36 : 8 : "Alt Home, then Alt" : 82 : "Cursor to Home" #-- Alt again to clear highlight.
117 : 1 : "Shift F6" : 63 : "Delete Record"
119 : 0 : "F8" : 77 : "Execute Query"
120 : 0 : "F9" : 29 : "List of Values"
9 : 0 : "Tab" : 1 : "Next Field"
40 : 0 : "Down-Arrow" : 7 : "Next Record"
9 : 1 : "Shift Tab" : 2 : "Previous Field"
38 : 0 : "Up-Arrow" : 6 : "Previous Record"
112 : 0 : "F1" : 35 : "Show Keys"
116 : 1 : "Shift F5" : 69 : " Clear Block"
116 : 2 : "Ctrl F5" : 3 : " Clear Field"
113 : 1 : "Shift F2" : 80 : " Count Query Hits"
112 : 1 : "Shift F1" : 78 : " Display Error"
114 : 0 : "F3" : 73 : " Duplicate Item"
115 : 0 : "F4" : 64 : " Duplicate Record"
69 : 2 : "Ctrl E" : 22 : " Edit Field"
122 : 0 : "F11" : 75 : " Enter " # Causes validation, w/o cursor move
118 : 0 : "F7" : 76 : " Enter Query"
81 : 2 : "Ctrl Q" : 32 : " Exit"
112 : 2 : "Ctrl F1" : 30 : " Help"
34 : 0 : "Page Down" : 66 : " Next Set of Records"
119 : 1 : "Shift F8" : 79 : " Print"
10 : 0 : "Enter/Return key": 27: " Enter/Next Field"
33 : 0 : "Page Up" : 12 : " Scroll Up"
116 : 0 : "F5" : 87 : " F5 Key for special uses"
#121 : 3 : "Shift Ctrl F10" : 82 : " Function 0" #--disabled. Cursor to home defined above
112 : 3 : "Shift Ctrl F1" : 83 : " Function 1"
113 : 0 : "F2" : 84 : " Function 2"
113 : 11: "Ctrl Alt Shift F2":95: " List Tab Pages" #<-REQUIRED, or F2 cant be assigned
114 : 3 : "Shift Ctrl F3" : 85 : " Function 3"
115 : 3 : "Shift Ctrl F4" : 86 : " Function 4"
117 : 3 : "Shift Ctrl F6" : 88 : " Function 6"
118 : 3 : "Shift Ctrl F7" : 89 : " Function 7"
119 : 3 : "Shift Ctrl F8" : 90 : " Function 8"
120 : 3 : "Shift Ctrl F9" : 91 : " Function 9"<B>Finding Forms 10g Patchsets</B>
Here is how to do the search: Log into metalink ( https://metalink.oracle.com ), then click on the Patches & Updates tab, then Simple Search.
In "Search by", select Product or Family. Enter "Developer Forms" in the box.
Then click the Release choices, and select "iAS 10.1.2.3"
Patch Type should be "Patchset/Minipack"
Platform or Language should be "Microsoft Windows (32-bit)"
Click Go, and the Forms 10g patch should show up. As of July, 2008 the only one available is: [url=
https://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=5983622&release=1710123&plat_lang=912P&patch_num_id=943599
]5983622
Edited 2008-12-12 to add a link to Oracle Note 559067.1 and added the fmrweb.res file listing.
Edited 2008-10-28 to change text format to work better within new forum format
Edited 2008-7-7 to add patchset search information.
Edited 2008-4-21 to modify information.
Edited 2008-3-6 to add information.
Edited 2008-5-29 to update information.I followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
Two points, Steve:
1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
Do you have any idea what to do to solve the problem?
Regards -
Error while installing oracle forms on windows 7
hello all,
i want to install oracle forms 10g on windows 7.
But during installation i am facing the following problem.
*"Install has encountered an error while attempting to verify your virtual settings.please verify that the sum of the initial sizes of the paging files is at least 256 mb"*
How can i avoid this?
Thanks
KaushalRead the following link and you will get Answer.
How to Install Oracle ON windows 7
If someone response is helpful or correct, please mark it accordingly.
Maybe you are looking for
-
Bom dia, Estou com dificuldade para customizar uma nota fiscal de saída. Preciso inserir um campo no layout da NF que mostre qual lote foi utilizado na saída do produto e outro que indique quantas unidades saíram do mesmo. Como o cliente atua no ram
-
The error message suggests that this problem can sometimes be caused by disabling or refusing to accept cookies, yet cookies are enabled. I want to import my calendar from Outlook but I can't even open the exisiting calendar I have already set up in
-
My alarms are not being logged in DSC 8.6.1. I can tell that the alarms are being properly generated when I monitor them in the Distributed System Manger. In keeping with previous posts, I know that the MSSQL server is running in the taskbar. I've
-
Is there any way to increase the font size in the Creative Cloud. Using a Lenovo Yoga 2 with 14" screen and care barely see the menus.
-
Advantages of Webcenter over ADF
Hi, For our new project, we are considering to use Webcenter and ADF. I want to know the advantages of using Webcenter and what extra features it has when comparing to ADF. Kindly explain for what kind of applications we can use ADF and Webcenter. Th