Form results does not show column headers

I created a form and when I enter info and then view the results, the results page does not show column headers.  How do I correct this?

I just found out that the engineered version (10g) is also quite strange:
http://public.ceving.de/2012050900/postaladdress_10g.png
It shows the values in the columns for the types.
This looks very buggy.
Is it not recommended to create views with the data modeler?
Edited by: 931739 on 09.05.2012 06:38

Similar Messages

  • FSG report output does not show column headers (XML Publisher)

    Hi everyone
    Iam required to create a template for an FSG report with 20 columns. Used copy of FSG:Fixed number of columns Template(FSGTEMP) to create the template because i need to do some conditional formatting(need to show negative values in red color).
    here is the problem:
    when i use the template and run the program the output i can see the row data but not the column headers..column headings are blank!
    regarding the conditional formatting, can anybody tell me how to give the condition
    iam able to give the condition for oracle reports but not for FSG reports as i dont see the column name in the 'data field' in conditional format
    Regards
    sam

    Open the report in Edit Mode Click on the reports and in the properties section Uncheck the
    Enable Document Cache Property and your issue should be resolved.

  • Sometimes JavaFX form (BorderPane) does not show correctly

    We have a problem with a JavaFX application running on Java 7. Sometimes a form (BorderPane) does not show correctly – it seems to be transparent (i.e. content previously shown at the same place is still visible). Controls seem to be present and respond to events – e.g. we can close the form by blindly clicking the appropriate button. Once the issue happens it is persistent, i.e. next time we open the form, it behaves the same.
    We have no reproducible scenario leading to the issue. It just happens here and there – we have not been able to identify any pattern yet.
    Additional information:
    the form (BorderPane) is loaded during application start-up but it is not shown initially,
    to show the form we remove previous contents from a StackPane and add the form instead,
    to hide the form we do the reverse.
    Do you have any ideas how to diagnose the problem? Where to look first? What kind of diagnostic code could we put in the application that would help us?

    I am unaware of any such issue being reported previously.
    Without a reproducible test case, you are unlikely to get much assistance.
    Other than the creation of a minimal test case which reproduces the issue, I could not even advise how you might go about diagnosing and fixing your issue.
    There were many bug fixes implemented for Java 8.
    I advise you to upgrade your test environment to the latest Java early access release (currently Java 8u40) and test to verify if your issue replicates in that version.
    If the issue still reproduces, create a bug report which includes your test case and full environment details.

  • Exporting pdf does NOT show my headers and footers

    I export number files to my administrators. I've noticed when I print my file directly from my computer in iWork/Numbers it prints and show the footer and header. However, when I send a bcc to myself when I attach the pdf file to my administrator, it does not show or print my headers and footers. Any ideas?

    Re-reading the original question, it does appear that Gogoette is exporting to PDF then attaching the file to an email versus using the "Send via email as PDf" operation. In that case, setting it to Page View for the export will solve the problem. I had originally thought "Send via email as PDF" was being used. What I noticed is that it doesn't give you the choice of page versus sheet view but if you first go through the motions of exporting, it sets it up. In prior threads about exporting to PDF, we have all recommended using Print, not export, and choosing Print to PDF (rather than to a printer) as the best way to create a PDF. It gives more flexibility, such as allowing you to choose which pages to "print to PDF".

  • Why MSAccess database shows data but does not show columns and DDL in edit mode in jdeveloper?

    Sir,
    My developer ver is 12.1.3.0.0.
    I create a connection to MS Access database, this database shows data as bellow in jdeveloper databases window
    But when I open any table in Edit mode like bellow it does not show any columns and DDL and give an error like bellow
    Similarly when I try to create view objects on these tables then on data controls the view object also doesn't show any columns like bellow
    What could be the reason any help on this issue
    Should I use MS Access or not but I want to use ms access for very small databases.
    Regards

    If you look into the certification matrix at Oracle JDeveloper and ADF 12c (12.1.3) Supported Systems
    You'll see that ms access is not supported.
    You can use oracle xe which is free for your project.
    Timo

  • View does not show column type

    I have two views containing a column, which is defined exactly in the same way. One view shows the column type as VARCHAR2 (200 CHAR) and the other does not show anything as the type.
    Here is the screen shot:
    http://public.ceving.de/2012050900/postaladdress.png
    First question: why is there a difference?
    Second question: why is the type VARCHAR2 although the modeler does not know VARCHAR2 but only VARCHAR as a column type?
    Here are the definitions of the views:
    This is "user_status":
    WITH user_status_data AS
    (SELECT work_user_status_data.person_id,
    MAX(work_user_status_data.startdate) AS startdate
    FROM work_user_status_data
    GROUP BY work_user_status_data.person_id
    SELECT person.id AS tmdid,
    person_a.lastname,
    person_a.firstname,
    person_a.email AS emailaddress,
    person_a.address
    || ', '
    || person_a.zipcode
    || ' '
    || person_a.city
    || ' '
    || person_a.country AS postaladdress,
    person_a.phone,
    person_a.mobile,
    person_a.company AS organization,
    person_a.orgunit_abbr AS orgunit,
    work_user_status_data.pwdresetflag,
    work_user_status_data.lockaccount,
    work_user_status_data.primarypwd,
    work_user_status_data.expdate,
    work_user_status_data.iamtid,
    work_user_status_data.startdate,
    work_user_status_data.stopdate,
    'IN PROGRESS' AS status
    FROM person_a
    INNER JOIN ts
    ON ts.id = person_a.ts_id
    INNER JOIN person
    ON person.id = person_a.person_id
    INNER JOIN user_status_data
    ON person.id = user_status_data.person_id
    INNER JOIN work_user_status_data
    ON user_status_data.person_id = work_user_status_data.person_id
    AND user_status_data.startdate = work_user_status_data.startdate
    WHERE ts."until" IS NULL
    And this is "work_user_status":
    SELECT person.id AS tmdid,
    person_a.lastname,
    person_a.firstname,
    person_a.email AS emailaddress,
    person_a.address
    || ', '
    || person_a.zipcode
    || ' '
    || person_a.city
    || ' '
    || person_a.country AS postaladdress,
    person_a.phone,
    person_a.mobile,
    person_a.company AS organization,
    person_a.orgunit_abbr AS orgunit,
    work_user_status_data.pwdresetflag,
    work_user_status_data.lockaccount,
    work_user_status_data.primarypwd,
    work_user_status_data.expdate,
    work_user_status_data.iamtid,
    work_user_status_data.startdate,
    work_user_status_data.stopdate,
    work_user_status_data.action,
    work_user_status_data.progress
    FROM person
    INNER JOIN person_a
    ON person.id = person_a.person_id
    INNER JOIN work_user_status_data
    ON person.id = work_user_status_data.person_id
    INNER JOIN ts
    ON ts.id = person_a.ts_id
    WHERE ts."until" IS NULL
    Edited by: 931739 on 09.05.2012 06:37

    I just found out that the engineered version (10g) is also quite strange:
    http://public.ceving.de/2012050900/postaladdress_10g.png
    It shows the values in the columns for the types.
    This looks very buggy.
    Is it not recommended to create views with the data modeler?
    Edited by: 931739 on 09.05.2012 06:38

  • 4.0 EA1 - Data Modeler does not show columns data types correctly

    Data Modeler shows all columns data types as 'unknown'.

    Hi,
    you need to check "system data types" directory and it contents. Its default location in SQL Developer is sqldeveloper\sqldeveloper\extensions\oracle.datamodeler\types
    Check "Preferences>Data Modeler>Default system data types directory" setting. If it's empty then copy defaultdomains.xml from previous installation to directory above.
    If it's not empty then you need to copy types.xml and defaultRDBMSSites.xml from default location to directory set as "Default system data types directory".
    Philip

  • How do I get autofill to work? it does not fill in my forms. Does not show on toolbar iether.

    I have been to help but nothing explains this to me.

    The built in [[Form autocomplete]] is rather basic, if you want enhanced form autofill capability you can use the [https://addons.mozilla.org/firefox/addon/4775/ Autofill Forms] add-on.

  • "ADF Navigation List" does not shows all items that are in table

    Hi
    Thank you for reading my post
    I am tring to use "ADF Navigation List" , (it can be draged from data control platte into a form)
    but when i drag and drop it on my form it does not shows all items that are available in my table ?
    it just shows 10 item when i have 60 record in my Table.
    Thanks

    Hi,
    in the pageDef ile, select the iterator for this list and set the fetch size to -1 (its 10 by default)
    Frank

  • Why this query does not show the result?

    Why the query with the schema prefixed does not show the result and the query without schema display the correct results?
    SQL> select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS';
    select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS'
    ERROR at line 1:
    ORA-00933: SQL command not properly ended
    SQL> select data_object_id,object_type from dba_objects where object_name='HR.JOBS';
    no rows selected
    SQL> select data_object_id, OWNER, object_type from dba_objects where object_name='JOBS';
    DATA_OBJECT_ID     OWNER                          OBJECT_TYPE
    69662              HR                                 TABLE
                       OE                                 SYNONYM
    SQL> SELECT USER FROM DUAL;
    USER
    SYS

    Hi,
    the column object_name refers to a object_name which is 'JOBS', the column owner refers to the owner 'HR', the value isn't stored together, so you have to select the two columns. It is the same behaviour as every other table/view. Have a look at the values in the view DBA_OBJECTS.
    Herald ten Dam
    Superconsult.nl

  • Hello am using ios 7.0.4 I have a question about messages that it does not show the time of a particular message after first message that I recive form a paricular person so please in the next version change this and with every message show time and date

    hello am using ios 7.0.4 I have a question about messages that it does not show the time of a particular message after first message that I recive form a paricular person so please in the next version change this and with every message show time and date

    Hi,
    How is everything going? Have you checked this issue from OWA? If so, please let me know the result.
    In adition, please also try to use the following powershell commands to check if the assistant has right permissions:
    Get-MailboxFolderPermission -Identity
    CEO’s email address:\Calendar -User assistant’s email address
    Also check with:
    Get-Mailbox -Identity CEO’s mailbox
    | fl *GrantSendOnBehalfTo
    Please let me know the result.
    Best Regards,
    Steve Fan
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Date field submited via my custom form does not show in mysql database

    I created a form with the custom form wizard with a birthdate field having the date picker feature. i set the birthdate field to sumit date as date datatype. My birthdate column in mysql database is datatype date. but when i submit the form the date does not show in mysql database. what should i do pls. is the problem with my form or with my database birtdate column.
    Thanks

    zeeztaz wrote:
    iis the problem with my form or with my database birtdate column.
    Thanks
    please post the complete code of the page which contains that form, otherwise it will be impossible to detect the possible reason for this error.
    Cheers,
    Günter

  • Multicolumn does not show any value when I tried to put a value on column 4 or above

    When I put a value in column 4 or above ( in any row ) multicolumn listbox doesn't show me any return. I got a example from NI forums and changed it to see if it works , but the results are the same.
    Does anyone know about it. I'm using labview 2009 9.0f3
    Thanks in advance

    Can you link to the example you are using?
    What is a "return" that it does not show? I am not familiar with these terms.
    Why don't you attach a simplified version of your VI with steps to demonstrate the problem
    LabVIEW Champion . Do more with less code and in less time .

  • Using firefox 14.0.1. Loading a link using right-click and "Open Link In New Window", results in new window opening but address bar does not show URL..

    Using firefox 14.0.1. Loading a link using right-click and "Open Link In New Window", results in new window opening but address bar does not show URL. However, if I right click on a link and select "Open Link In New Tab", the Tab shows URL in address bar. So it's working when it's a New Tab but not a New Window.

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • Report does not show the main section while calling from forms 6i

    Hi
    I am running report from report from forms 6i but is does not show the data in main section, where as the data in the header section is ok.
    But when i run the same report independantly from report builder it show the both header and main section with relevent data.
    pl solve the matter
    thanks in advance

    can you tell me more about this, you might check if you are using different users when you call this report or if the user has all privileges to see all tables in this report

Maybe you are looking for