Form6i Automatically Close During Downloading Image

We have built a form 6i version 6.0.18.3 application to download the image files from database 9i version 9.0.1.3. The image is as BFILE data type in the table. When we use the form application to download the file, the form application will be automatically closed suddenly during downloading.
We use "write_image_file('c:\temp\output.jpg','JFIF','u_image.image');
to download the file in the form.
Please advise how to fix this problem, thanks.
SK

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Similar Messages

In the 20.0.1 update, I noticed when you accidentally close your window your browsing it automatically closes your downloads. Can I bypass this?

In the 20.0.1 update, I noticed when you accidentally close your window your browsing it automatically closes your downloads. Previous versions when you close your window and reopen Firefox your downloads are unaffected until your downloads are finished or you cancel it yourself. Is there a setting I can set that my downloads are unaffected when I close my window.

You can set the browser.download.manager.quitBehavior pref to 2 on the about:config page.<br />
That will make Firefox ask for confirmation if you want to cancel the download if you close Firefox.
See:
* http://kb.mozillazine.org/browser.download.manager.quitBehavior
*http://kb.mozillazine.org/about:config

Downloading images used to go automatically to the last folder used to save images, even when reopening Firefox. In just the past few days, possibly coinciding wih the most recent updates, the folder defaults to the 'Downloads' folder. This is most annoyi

Downloading images used to go automatically to the last folder used to save images, even when reopening Firefox. In just the past few days, possibly coinciding wih the most recent updates, the folder defaults to the 'Downloads' folder. This is most annoying. What happened? Internet Explorer 8.0 did the same thing. This was one of the reasons why I started using Firefox to download all images. I went into Tools>Options and it only lets me set another folder. I dont want to set a specific folder I want it to always go to the last folder used. So what gives?
== This happened ==
Every time Firefox opened
== possibly when the most recent updates were installed, a few days ago

Thanks jscher 2000. I guess I didn't make it clear. "It restarts with all the addons activated, and resumes with the tabs that were open before closing it." IE, it's running fine now with all the extensions activated. Everything is OK now.
So something in the Firefox code was causing the bad behavior. It's not essential that I find out what the problem was - I'm just curious. And if anybody else has this same problem, it might be nice to have it corrected at the source.

Is there any way to set email to automatically download images?

Hi,
Is there any way to set the email on my 8330 to automatically download images? Currently using o/s v4.5.0.173. Email settings are set to enable HTML Email & set to download images automatically but I still have to tell it to download the images and go through the prompts advising that downloading internet images can expose your internet address, blah blah blah.

Hello,
See this KB...I believe the final "Note" might contain the relevant information you need (no...not to "fix" it...but to help you understand that it may be WAD -- Working As Designed).
Best.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I want to edit properties of the interface windows opened while "Open File", "Save Page As" and interface opened during Downloading of any file.

I am doing a small project on dedicated web client where in user automatically logs in non-root user and Firefox automatically starts.
I am using Fedora 14 kernel 2.6.35.12-88.fc14.i686 and Firefox 3.6.16.
I have installed only Gnome in my computer with no Nautilus or other file browser on it.
I want to edit properties of the interface windows opened while "Open File", "Save Page As" and interface opened during Downloading of any file.
Please guide me for this.

First, I sent an email to the author of PhotoME to inform him of the serious issues his addon caused with Firefox latest versions.
Now, for those of you who do not have the PhotoME addon and yet experience the same problem that I had and that I described above, I suggest the following strategy.
As PhotoME did cause these problems with Firefox latest versions, I am pretty covinved other addons probably might cause these problems too. Therefore, adopt the following method.
Test one addon at a time to see if this particular addon is behind your Firefox issues like the ones I had.
So, disable one addon only at a time. Then close your Firefox and restart it from scratch and see if you still have your Firefox problems. You must restart the Firefox browser from scratch. If you still have these Firefox problems, re-enable the disabled addon, restart your Firefox (again!) and repeat the same method for every single addon that you have.
Try to be selective by choosing first addons that are more likely to cause your Firefox problems such as not very well-known or not very popular addons (like it was the case for the PhotoME addon).
If this method works or if it does not work, report it on this web page so that others can be helped with your comments.
I hope this method will help you because I was really upset that I had these Firefox problems and I first thought it was the fault of Firefox, only to discover later that this PhotoME addon was the culprit and had caused me such upset.

Choosing only a selection of String from BufferReader/downloading images

I'm trying to write a program to download images from a webpage (basically it's a slide show, with links to the next/previous photo).. I am trying to automate it so that it will automatically load the next link, download the next image, until there are no more.. I haven't been able to find anything on how to download an image (jpg) to my computer.. and then I'm trying to figure out how to scan through the source code of the webpage, and choose only a selection of it (the link for the next page)..
For example, I'm trying to do this on this http://screenshots.teamxbox.com/screen/81845/XBlades/
Here's what I have so far--
import java.net.*;
import java.io.*;
import java.util.*;
public class Images {
    public static void main(String[] args) throws Exception {
         Scanner input = new Scanner(System.in);
         System.out.print("URL: ");
         String inUrl = input.nextLine();
    URL link = new URL(inUrl);
     BufferedReader in = new BufferedReader(
                    new InputStreamReader(
                    link.openStream()));
     String inputLine;
     while ((inputLine = in.readLine()) != null)
          if(inputLine.contains("http://media.teamxbox.com/games/ss/")){
             System.out.println("Photo Exists");
          in.close();
}If anyone could steer me into the right direction, it would be GREATLY appreciated. Thanks a lot!
I am willing to pay anyone who can help me figure it out.
-Reidypea

DrClap wrote:
reidypea wrote:
I didn't even do anything really.Yeah, I guess that's part of the problem.
Okay, let's take your original code. What's it supposed to be doing? Reading HTML from a web page? And you want to extract all the references to images in that HTML and do something with each of them? Okay. Then you need to parse the HTML and look for <img> tags and other HTML elements that refer to images. Extract the URL for each image. Probably it will be a relative URL, so you have to make that into an absolute URL based on what you used in the first place.
To download an image you use code much like what you have there, only you don't use a Reader because an image isn't text. Just use an InputStream by itself. You'll also have to look at the Content-type header to determine what type of image it is.
That should get you started. If you think it's too much work (and yeah, there's a lot of details to iron out there) then by all means go to one of the sites mentioned earlier to contract it out. But don't just mope around here pestering people to do it for you. Way too much work for a freebie.Thanks a lot man, I appreciate it

I am trying to reset my 4th generation ipod touch via itunes (as I cannot remember parental controls code). In itunes it does a download but then says the software was corrupted during download. Itunes is up to date. Operating system is vista. Any ideas?

I have given my 4th generation ipod touch to my husband and he wants to download some in app purchases, so I am trying to reset it via itunes. I dont remember setting parental controls but I must have at some point, maybe when I lent it to the kids. But I cannot remember the password and nothing I have tried works. So I have backed the ipod up and am trying to reset it but after speding 10 minutes doing a download I get a message that says:
"The softwaar for the iPod was corrupted during download. Disconnect and reconnect, then try again. Make sure your network settings are correct and your network connection is active, or try again later"
I have tried many times. All the settings are correct, and the network seems to be working fine in all respects.
Any advice very much appreciated.
Thank you
UPDATE - decided to try one more time after trying for hours and it has worked! I now suspect it may have been because my son was playing an online game. Though we have plenty of bandwidth. But in case, I guess it could be a bandwidth problem.

A Complete Guide to Restore or Recover Your iDevice (or if you forgot your passcode)
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
     If you have forgotten your Restrictions code, then follow the instructions
     below but DO NOT restore any previous backup. If you do then you will
     simply be restoring the old Restrictions code you have forgotten. This
     same warning applies if you need to restore a clean system.
If you need to restore your device or if you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
     1. Verify that you are using the latest version of iTunes before attempting to
         update.
     2. Connect your device to your computer.
     3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
     4. Select the Summary tab.
     5. Select the Restore option.
     6. When prompted to back up your settings before restoring, select the Back Up
         option (see in the image below). If you have just backed up the device, it is not
         necessary to create another.
     7. Select the Restore option when iTunes prompts you (as long as you've backed up,
         you should not have to worry about restoring your iOS device).
     8. When the restore process has completed, the device restarts and displays the Apple
         logo while starting up:
           After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
          to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
          iOS, keep your device connected until the "Connect to iTunes" screen goes away or
          you see "iPhone is activated."
     9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
     1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
         of the cable connected to your computer's USB port.
     2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
         red slider appears, then slide the slider. Wait for the device to turn off.
          If you cannot turn off the device using the slider, press and hold the Sleep/Wake
          and Home buttons at the same time. When the device turns off, release the Sleep/Wake
          and Home buttons.
     3. While pressing and holding the Home button, reconnect the USB cable to the device.
         The device should turn on. Note: If you see the screen pictured below, let the device
         charge for at least ten minutes to ensure that the battery has some charge, and then
         start with step 2 again.
     4. Continue holding the Home button until you see the "Connect to iTunes" screen.
         When this screen appears you can release the Home button.
     5. If necessary, open iTunes. You should see the following "recovery mode" alert:
     6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

Acrobat XI Pro automatically closes itself with no messages etc. after few seconds

Greetings all,
I don't know why but my Acrobat XI Pro (11.0.0) automatically closes itself (with no warning, no messages etc.) after few seconds. I installed the AXI as a part of the CS6 Master Collection on my Windows 8 (x64) laptop. Just as suggested at some other posts in the forum:
I checked the "security settings (enhanced)" tab but the protected view option is already off.
I searched for the eula.exe under the "Program Files (x86)\Adobe\Acrobat 11.0" folder but there is no eula.exe. May it be not present because I installed it as a part of CS6 Master Coll. package?
I am using Eset Endpoint Antivirus as a third party Anti Virus Software.
The problem occurs when:
I open up a pdf file from outlook etc.
I manually open a pdf file from windows explorer
I open adobe acrobat with no file to view
As I mentioned above, I see no error messages or warnings during the closing down. It acts as if I clicked the close button on the top right corner. I know that there are a lot of posts in the forum about this issue, but none of them helped me to solve my problem. I would be glad if you can help me with this problem.
Thanks,

Hey i was having this issue also with Adobe Acrobat pro... it only seemed to be affecting one program that produced PDF output automatically. When the processes finished the PDF is supposed to be displayed and instead it would rapidly flash across the screen and close. THen i would have to hunt for the PDF to review its content. I tried a couple of things like deleting my preferences for acrobat C:\Users\[your user name]\AppData\Local\Adobe\Acrobat\10.0. You might have to show hidden files. In the explorer window select Organize-> Folder and search options-> once that opens view -> check show hidden files, folders and drives. then navigate that path above. Make sure adobe is closed then delete everything in there or move it off to another folder if your worried it will break it further.
That did not fix the problem though. I opened the application and ran my process again same results (adobe closes pdf auttmagically). so i opened adobe acrobat and navigated to Edit -> Preferences -> look under the General tab and click the select default PDF handler and that seemed to fix my problem. I also disabled the enhanced security look further down in that list under security enhanced. then a reboot so it is possible that the enhance security setting was the cause i think i will play with that for a minute to see if it was but i think my issue was the default handling. good luck

Help Please: Unable to download images in e-mail

Hi,
I am a new Blackberry user and I recently purchased a new Blackberry 8900 on T-mobile (USA). I am having a number of issues with e-mail. I am using a Blackberry Enterprise Server to connect to my personal e-mail which is hosted by the third party Microsoft Exchange hosting company.
Basically, I am able to receive e-mails but even though I have the settings set to "Yes" for both HTML E-mail and Download Images Automatically, when I open HTML e-mails, no images are displayed. To make matters even worse, when I open the menu and select "Get Images", they STILL do not download, even though I see the "arrow" icon on the top right corner. I have no idea why this is happening. I have tried rebooting and I have called T-mobile Tech Support, which is useless. They just tell me to reinstall the phone's software, which I don't think will help.
I am also have one other more minor issue. When my device first synched with my Exchange Accountallmye-mail came across but only the headers were downloaded.This is not an issue for any new messages I receive, just for the ones that were synched initially.The auto more feature was and is still turned on.
PLEASE HELP... I am desperate to solve these issues, or I think I am going to return the phone and just go back to my T-mobile Dash, which had none of these issues, despite it's shortcomings.
Thanks,
Matt.

Hi,
I am a new Blackberry user and I recently purchased a new Blackberry 8900 on T-mobile (USA). I am having a number of issues with e-mail. I am using a Blackberry Enterprise Server to connect to my personal e-mail which is hosted by the third party Microsoft Exchange hosting company.
Basically, I am able to receive e-mails but even though I have the settings set to "Yes" for both HTML E-mail and Download Images Automatically, when I open HTML e-mails, no images are displayed. To make matters even worse, when I open the menu and select "Get Images", they STILL do not download, even though I see the "arrow" icon on the top right corner. I have no idea why this is happening. I have tried rebooting and I have called T-mobile Tech Support, which is useless. They just tell me to reinstall the phone's software, which I don't think will help.
I am also have one other more minor issue. When my device first synched with my Exchange Accountallmye-mail came across but only the headers were downloaded.This is not an issue for any new messages I receive, just for the ones that were synched initially.The auto more feature was and is still turned on.
PLEASE HELP... I am desperate to solve these issues, or I think I am going to return the phone and just go back to my T-mobile Dash, which had none of these issues, despite it's shortcomings.
Thanks,
Matt.

HT204380 My phone (iPhone 5S) getting green display after one second going to switch off then automatically ON during FaceTime

My iPhone (iPhone 5S) getting green display after one second going to switch off then automatically ON during FaceTime call. My OS version now 7.0.4. I think recent update actually to fix the above issue but still continues.

Similar issue Andrew. After installing 8.0, the IOS deleted 225 songs from one of my playlists, and I'm still "recalling" songs that are no longer in my Music Library. Fortunately, although the playlist of 235 had only 6 songs left on it ( on my Mac), the Playlist was not erased from my I -Phone. I was able to recreate the Playlist on my Mac, using the intact playlist on my phone. When I synched however, I was back to square one. I went to the Apple store, and I had to reset the phone . We also downloaded IOS 8.02. They saved my playlist in the Cloud, deleted it from my Mac, then synched it. Lo and behold, the playlist I recreated on my Mac, synched to my I Phone. After the reset, I had like 11GB of free space. (Its been 5 days since the "reset" and the number of GBs fluctuates from day to day !!)
When I got home from the Apple store I spent after hours reinstalling all the apps, synchng the phone to the Bluetooth in my car ( you know the rest of the saga) , I purchased a song from I Tunes. I "drag and dropped" it into a Playlist, and synched. Didn't work. Song shows in "Recently Added", but the drag and drop feature doesn't work. Bottom line, I'm not willing to "reset" my phone every time I add a song ! I've tried any number of fixes posted to this support community, but none have worked for me.
Furthermore, it took me 3 hours to get the phone re-synched to the Bluetooth system in my car. However every time I connect to "Bluetooth Audio", the system needs to "find" and "reconnect to" my phone. If you ( or anyone else ) finds something that might work for both the music synch and /or the Bluetooth, I'd appreciate your input.
Thanks, Lorenzo

How do i download images from nokia 6350 w/o memory card?

I'm trying to download images taken with the Nokia 6350 camera to iPhoto using a USB cable. The phone does not have a memory card. I plug the cable in and select 'Data Storage' from the connectivity menu and then get a message ' Insert memory card to continue'. At this point iPhoto has started but does not recognize the phone as a data storage device. What am I missing (beside the memory card)?

Not a solution to your problem but during my Nokia days there used to be a application on Nokia website called 'nokia transfer' or something similar. I would use that and then import to iPhoto...sorry cannot give you a clue to your problem itself.

How to automatically close the client?

Hi all,
Is there any way to automatically close the client?
Att,
Renan Lopes

>
Juan Reyes wrote:
> Theres no such tool as standard and to be honest you wouldn't like to have one, Opening the system on a production environment should be only done in very particular situations and the utilization should be monitored closely.
>
> Regards
> Juan
Hi Juan,
The implementation of our environment was a six months ago and during the implementation, the client production was opened a few times. The problem is we are in a process of audit and I suggested as a security measure the automatic closing of the client.
Att,
Renan Lopes

Result recording configuration with automatic close indicator

Hi Guys,
I was testing this automatic result configuration in my system.
I selected the u201C1u201D (i.e. Automatic Close) Recording Configuration indicator on the plant level in SPRO > QM > Basic Settings > Maintain Settings at Plant Level> plant > Result recording tab > Recording configuration > maintain Automatic Close.
Next, I entered the three user parameter ID QAE, QAN, and QAS in the user parameter SU3. However, I leave the parameter value for these three ID blank as I donu2019t know what to put in.
During result recording, I tested this MIC characteristic on both reject and accept scenarios (i.e. fall under lower/upper limit, and fall outside lower/upper limit). To my surprise, nothing happens. In another word, there is no automatic close incurs on the inspection characteristics (i.e. both the accepted and rejected checkbox still remain unchecked even I navigate around, and hit the u201Ccontinueu201D, u201Cbacku201D, or u201Csaveu201D button).
Further, I have fulfilled the following prerequisite as specified in the SAP help portal on this topic:
1 - The inspection scope is fixed scope of this MIC.
2 - I entered the target sample size (i.e. both the value in the u201CInspectu201D and u201CInspectedu201D field is similar).
3 - I think I should have the authorization because I have entered the three parameter IDs on the SU3.
May I know what is wrong?
Can it be the parameter values for the three parameter ID are blank in my SU3? If so, what value I should enter for these three param ID? If not whatu2019s going wrong?
Thanks
YY

Hi Gajesh,
For some reason, it doesnu2019t work.
I think I will tell my guys to perform manually pressing the Lock icon button to force it to valuate and also become status 5, since this the two valuation checkboxes, i.e. accept and reject checkbox is either ticked correctly according to the sampling plan setup in the sampling schema.
Further, I donu2019t see why this extra manual step is so difficult for my worker.
Thanks for your help
YY

Automatic adjustements to RAW image?

Hi,
I am fairly new to using Lightroom and I wondered if someone might be able to help....
I notice that when i import RAW images into Lightroom and open them up, they immediately become dull, less vibrant and very different o the in-camera image. I have tried to find whether there is asetting which applied automatic adjustements to the image but have been unsuccessful. This doesn't seem to happen when i use the Canon RAW processing software. Any ideas?
Thanks in advance.

It might be that a preset is being applied to your photos during import.
Make sure that no auttone is applied. Go >Edit >Preferences >Presets tab and make sure that <Apply auto tone adjustments> is un-checked. See screen shot:
When you import images into Lr, on the right side in the Import Dialog under <Apply during Import> make sure that <None> is selected. See screen shot:
Irrespective of that, your image will look different than on your camera display.
It is sometimes assumed that the image on camera display must be the "correct" image. That is not so. The camera creates a tiny JPG for display that is not representative of the Raw image. Lr gives you a better rendition of your image.
If it looks flat and dull - that is not a flaw. Contrast and saturation or vibrancy can always and easily be adjusted. In fact, a flat looking image is easier to work with.
A "crispy" looking image seems "better" at first. But often the contrast and/or the saturation are too high and detail gets lost. This might not be visible on the screen but becomes apparent when the image is printed.
Aside from that: Lr can show you the image correctly only when your monitor is calibrated.

Newly downloaded images don't create a new project

When I download images from my CF card, they don't show up anywhere in my projects, They only show up in the last download folder.
My settings for import are Destination: New Project, Shore files: Aperture library, Rename files: none, No effect presets, no file types are checked, and no backup Location .
How do I get my new images into a new project, and why aren't automatically creating a new project?
I have an Imac running Mtn Lion, and the latest version of Aperture.

Aperture will not import into new projects. When I click import, the dialog says importing to new project. A new project is not created. I have 9 projects which appear to have every image I've ever imported (over 8000). I have other projects, Every new image goes to Name 1.0 ,Name 1.0 1,Name 1.0 2, Name 1.0 3,Etc. Each of these files have all of my images on them, even ones that have prevously been successfully imported into their new projects.
This is really weird. Either your current Aperture library needs fixing or you are having a problem with broken presets and preferences.
Could you please make a test and see, if you are having the same result, when you are importing into a new test library? When in Aperture , go to the "File" menu and use the command "File > Switch to library > Other/New". Now try importing into your library. Do you see the same wrong project names?
If it works well with a new Aperture Library, repair or rebuild your current library - see this manual page: Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual
If it does not work well with a new Aperture library, delete your Aperture user preferences as described here: Aperture 3: Troubleshooting Basics
Regards
Léonie

Form6i Automatically Close During Downloading Image

Similar Messages

Maybe you are looking for