Format problem when export to RTF

Hi,
Iam creating a RTF template, when export to pdf everything working fine. However, when i export to RTF(word) alot of document properties got lost such as :
font size default to 12 when it's blank line; page number are not re-start for multi sections; table properties not holding, header, footer and edge margin are not holding, etc...... Is there any way to fix these. I tried to create a word macro to fix some of the format problems, but the macro have to run manually instead of initialized form a text field option on exit. Any idea on how to fix or work around would be appreciated.
Thanks,
Tam

im2famous4u wrote:
Do you know if and when Pages will provide support for tables in rtf format? (My school requires that I send all assignments rtf format.)
As Yvan points out, no one here can write what they know about it, and the vast majority of us know nothing about it.
You cannot take any decision based on the assumption that Pages will one day support tables in RTFs, because it may never happen. If you need both RTF and tables, the only option is another tool (like NeoOffice, TextEdit, MS Office and so on).

Similar Messages

  • Cross Tab Formatting Problem when exported to excel

    Hi There,
    I got a problem with cross tab when exported to excel, Call_id field is occupying 4 cells. Below is the structure
    AssignedGroup-Call_Id-Total
    A--1001-
    A--1011-
    Total-----2-
    B--1021-
    B--1031-
    Total-----2-
    C--1041-
    Total-----1-
    can anyone help? How to restrict call_id to fit in single cell?
    Thanks,
    Jyothi
    Edited by: Jyothi Yepuri on Sep 16, 2009 7:50 AM

    Yeah.. crystal has giving  some issues while exporting reports without SPs, especialy previous versions.
    So  Better to install latest SP or patches for CR 10.0. I think SP 6 is the updated one for CR10.0.
    For More info Go through this link,
    http://resources.businessobjects.com/support/additional_downloads/service_packs/crystal_reports_en.asp#CR10
    Regards,
    Salah

  • Text formatting problems when exporting to Epub

    During my fixed layout export to epub, some of the text on  my pages is messed up (see image).  Anyone know how to fix this?
    FWIW: 1) I export with spreads disabled to keep the layout as i have it in ID. 2) I am using 3-4 fonts from  typekit.

    yes, you are correct about what i am trying to accomplish.  I will take your advice for testing the iBooks.  that said, I'm trying to get the kindle version to work correctly.  I don't know much about the process of preparing for Kindle and the documentation I've seen isn't much help to me (I'm not that technical). Any guidance for how i might resolve the issue described above?  It's reallly unfortunate I can't just design in ID and  then publish everywhere with the click of a button.
    Thanks in advance for any help!

  • Report Header problem when exporting as Editable RTF

    Hey i was advised to post my query to this forum. My query is this Thread My report Header shows underneath my Page Header in Crystal reports 2008 can someone help me please?

    hi Demeleo,
    i was going through old forum posts and saw this one...did this get resolved?
    Hey
    I created reports in Visual Studio 2008 with crystal reports basic, i then upgraded to Crystal reports 2008 so i could be able to export them as EditableRTF. My first problem was i could not open my reports in VS 2008 anymore, but i do open them in The CR 2008 IDE. My problem now is when i export my reports my report header appears underneath my page header and my page number stays one. I noticed this happens when i export a report as EditableRTF.How can i Export my report to be editable without having this problems?
    using cr 2008 v1 (for cr server) i was not able to reproduce this issue when exporting to RTF.
    when exporting to Word, Editable, i can see this issue. mostly because the word export has the cr page header info going into the word page header.
    as the word export is essentially an RTF export anyway, i would recommend getting the latest patches / service pack for your cr and the RTF export should be what you're looking for.
    jamie

  • Having problems when exporting .swf file as an animated gif

    Hi:
    I was wondering if anyone has ever had any issues exporting a
    flash file as an animated gif? When I do so, the image quality is
    very compromised and the animation is distorted. I know this is not
    very specific question, but I have never encountered this issue
    before, and I am trying to help a co-worker. I don't understand why
    it looks exactly the way we want it to look as an swf file, but not
    as an animated gif? Can anyone point me in the right direction as
    to what to look for as the potential source of this problem? I have
    the swf file, although this would not be very helpful as I don't
    have access to the flash file (but I can send it to you if that
    would help). We tried unchecking the feature to optimize the image,
    and changed the color pallete to adaptive, but this didn't solve
    the problem. I also tried removing any unnecessary layers prior to
    the export. Basically, I'm not sure as to how to proceed and what
    may be causing the problem. I also want to mention there is a
    placed image on the stage. Could the type of image placed be
    causing the problem when exporting to a gif file, but not as a
    .swf? If anyone could help, I would really appreciate it! Thanks.
    Sara

    I also wanted to mention that the swf file uses sound. I am
    reading an old book that I have on Flash and it's saying that Flash
    and Shockwave Flash enter a special mode when they encounter a
    stream sound in which the animation is forced to keep up with the
    sound track, if the animation frames can not be drawn quickly
    enough, some frames are skipped. I am also reading that the
    animated gif format does not support sound. Again, the only
    reference I have is for a very old version of flash, and I'm not
    sure it applies to CS3. I am now just thinking that the sound may
    be the issue.

  • Format changing when exporting from InDesign to PDF

    I am using Acrobat 8 version 8.1.2, and InDesign version 5.0.2.
    I am noticing a very specific problem when exporting some files to PDF from InDesign.
    We often have a format where we have a numbered list of right-aligned number, followed by some text, a leader line, and then another number at the end of the line. This is set up with a left indent and a first line left indent (rather than using the numbered list options), and then the necessary tabs later in the lines.
    I am finding since we switched to IDCS3, that when I export to PDF, lines containing this format change in the PDF. The text that appears after the number in the front of the line is pushed over on top of the leader line, leaving a huge white space. On rarer occasions, it will move things in lines that have no indents, but contain tabs that aren't being used.
    I have been able to get the files to export correctly by removing the left indent and first-line left indent and using tabs instead (or by removing unused tabs). But we have hundreds of files set up in this manner so going in and changing how they are all set up is problematic to say the least.
    Is this a known issue? Does anyone know why this might happen and how I can prevent it?

    I haven't tried printing to PDF. I will try that and see what happens. Unfortunetly, where I work we are required to export to PDF rather than print to PDF, so if it works it will only be a clue for me rather than a solution.
    Thanks for the reply. I'll try a cross post to the InDesign forms.

  • Format Changes when Exporting to PDF

    I'm using Crystal 12.0 and have an issue very similar to these threads listed below. 
    While viewing a report on my development machine, all is fine.  I can export to PDF and the formatting is OK. 
    However, when the report is exported to PDF on the web server, the spacing between some of the text is off.  The spacing is used for a CrossTab cell in a "Display String" that I changed using "Format Field."   All that's supposed to happen here is several spaces are used to move the text under the proper column. 
    When exporting to PDF on the web, the text moves over to the left like it's missing some of the spaces.  I wondering if the below threads apply to Crystal 12.0. 
    Thread:1220516 and
    Format Changes when Exporting to PDF
    Thanks kindly for your assistance,
    -Marty

    I'm having a very similar problem using Crystal Reports for Visual Studio 2008. Everything is perfect when running in VS 2008, it takes the report and exports it to PDF format via VB code. The PDF file is idenitcal to the report. However, when run on the server the one page report (when exported to PDF) gets chopped into ten 4x4 chunks. So the PDF file is 10 pages....its like puzzle pieces of the original.
    I've drawn a bunch of lines on the report to look like boxes - perhaps this is causing issues? The font on the report is Arial.
    The server has the 10_5 runtime installed and it is set to the same default printer as the development PC. I have been stuck on this for days and would really appreciate any advice you may have.
    Thanks!
    Edited by: WanderingEye on Sep 18, 2009 4:54 PM

  • Hyperlink problem when exporting to PDF

    We are using Crystal Reports XI R2 and having a problem when exporting a report to PDF that contains a Hyperlink to "A File".  The hyperlink works correctly when previewed inside Crystal but when it is exported to a PDF the text does not appear to show any hyperlink at all.  Am I missing something or is this a bug?

    Hi Brian
    Please visit the following URLs that talk about the issue.
    http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2014557&sliceId=&dialogID=25464253&stateId=1%200%2025430948
    http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2014405&sliceId=&dialogID=25464259&stateId=1%200%2025430949
    You can also download the CR XI R2 Service Pack 4 by using the following URL and check for the results.
    -  https://websmp208.sap-ag.de/bosap-supportsw
    -  Then choose Crystal Reports from 'Software Products' dropdownlist,XI Release 2 from 'Product Version' dropdownlist and service packs from 'Software Types' dropdownlist.

  • Problem when exporting Universe to Enterprise

    Hi All,
    I am facing problem when exporting universe to enterprise. I am getting the following error.
    "You do not have the right to add objects to the folder /webi universes" .
    1) I tried logging with admin account still getting the same error.
    2) I tried adding my user id to admin group but still has the same problem.
    I did not make any new changes to security. Do not know what might be the reason. Any ideas would be greatly appreciated.
    Environment: BOXI 3.1, windows server 2003.
    Thanks and Regards
    Sudharsan.

    Hi Prasanna,
    1) I checked the rights on universes for Administartors and Everyone for webi universes folder :
    Universe Security:
          a) Administartors:  Private
          b) Everyone has public.
    User Securtiy:
          a) Administrator : has full access
          b) Everyone : No access
    2) I tried adding my user id to admin group and exported it, but no luck. I also brought a new user into the system (thinking that i might have some restrictions some where)  and added him to admin group and tried with his user id too but still has same problem.
    Thanks
    Sudharsan.

  • Problem when exporting to Vimeo I get message "The share operation has failed. Quicktime error: -50" The file only gets to 8% before this happens any idea how to fix I have a movie deadline to meet!

    Hi all,
    Finished editing a short movie.
    Then went to share on vimeo but got this message - see also screenshot when I tried to export to desktop.
    Problem when exporting to Vimeo I get message "The share operation has failed. Quicktime error: -50" The file only gets to 8%.
    Have tried deleting my render files for the project and also another fix mentioned of deleting any black space files on the edit itself but neither work?
    Just upgraded to OS Mavericks could this be causing it? If so how to downgrade?
    thanks
    Louis B

    Thanks for your help both, I called Apple tech support and spoke to a really helpful chap called Andrea who helped me out. Now got my Master file sorted and am trying Vimeo upload again.
    Just to clarify points for people out there with the same issue:
    First steps
    - Ensure background rendering is turned off in preferences
    - Delete project and events render files
    - If upgraded to Mavericks then go to FCPX in finder under applications hit buttons 'CMD' and 'I' together and tick the 'prevent App Nap' box.
    Next Steps
    I had already done all of this when Apple Tech spoke to me so we discussed the message 'Quicktime -50' and what it meant. It wasnt a purely generic error message but was not detailed enough to point to one specific issue. This problem had occurred in previous years (so Mavericks not wholly to blame) and patches were issued over the years by Apple to help resolve some of the problems.
    The message essentially is indicating that there is a problem somewhere with the media in some way shape or form.
    My export went to 8% then failed. Apple's answer was that the project settings were corrupted in some way.
    So what they suggested (so simple I could kick myself) was to select all the media files by 'CMD + A' then copy them 'CMD + C' then create and open a new project timeline, and then paste in 'CMD + V'.
    Then we tried export again this time to a master file with some settings detailed by Apple.
    The difference now was it got to 40% then failed but due to a different reason 'error -1 frame 10124 error'
    At last we get past the project issues and into the event media issues, it seems that when I loaded the compact flash last night, the iMac kept ejecting the reader so had to copy files over quickly and seems that some of the file clip I used although showed on the viewer, didn't seem to have loaded all the correct media, so selecting this clip frame 10124 on the viewer I found that it showed as red on the frame row which implied an issue. So I simply bladed it off and deleted it.
    Then I reran the export to Master file and it worked, though jumping from 40% to 100% complete was a shock to me!
    Now am trying the export to Vimeo - hope this helps some of you out there. Worst case pick up the phone to Apple and speak to the Final Cut Pro guys they can help.
    best wishes,
    Louis B

  • Crash when exporting to RTF -Indesign CS4-

    I am experiencing a crash each time I try to export a specific chapter of a book I am making to rtf format.
    The original file had anchored objects (Numbered paragraphs) but since they are not carried over to the exported word file I have replaced them, so this mustn't be it. The text includes footnotes but no tables or any other demanding characteristics.
    All the following have failed:
    I have tried to copy and paste the text to a new document and then export.
    Just copy and paste into word.
    Replace all fonts with the system Arial font and then export.
    Just select a couple of paragraphs to export.
    I am using Indesign CS4 patched to the latest available version and have not installed any external plugins.
    Any help would be greatly appreciated.

    I'm working on Windows XP and the fonts were just system OTF Times New Roman and at a later time I tried with Arial.
    I finally found a workaround in this by trial and error. It seems the problem was caused by a particular paragraph. Once this paraph was removed, the rest of the document exported fine. And with later investigation I found that there was an "index marker" imported from word on the original text that was causing this.
    It seems that you cannot (as yet) export to RTF when your document is using INDEX markers. I made one just to test it and this happens for indexes created in indesign, too.
    I hope this bug is fixed. Thank you for your help.

  • Formatting lost when exported to excel

    When I export a worksheet results to excel the formatting is being lost like in my worksheet I wanted a line and space for every grouped item which is lost in excel sheet. Is there a way get around for this ?
    Thanks

    Not exactly sure what formatting you're having a problem with, but I'll list some of the points I can think of, of exporting to Excel and will hopefully cover it. I believe you may be referring to point 1 below, but just in case ...
    1. If you have group sort on for a column or more, then when exported to Excel, you won't have those 'blank' values for the column(s) that's grouped. That's why when you know someone will be exporting to Excel, it's a pain as all group sorts are usually taken back off (which can screw up exactly what you're trying to point out in the workbook).
    2. If you have a page -> item (ie: lots of values you pull down like a LOV), then I believe, that you won't get an Excel worksheet for each value in the LOV but only for the one currently displayed when you performed the File -> Export.
    3. When you export to Excel, you only get actual values, no functions of how it was calculated (ie: it'll be static, not dynamic).
    4. You can export to Excel using Plus and might not get the formatting characteristics you want in Excel. I've seen users specifically bring up Viewer just to get the formatting characteristics (colors, fonts, etc.) when they export from that Disco version.
    5. Sometimes when you export from Disco to Excel, that actual value that gets posted in Excel is different. I know ... it sounds wierd, but it's a fact. The problem is NOT Disco, but is a problem with Windows and a setting has to be altered (although I'd have to hunt what that setting is now though). However, I've only seen this happen a few times, so definitely not the norm.
    Russ

  • Crystal Reports Formatting issues when exporting to Word Editable document

    Version: CR XI, I am editing a document exported from CR to Word Editable
    When exporting to a Word Editable (.rtf) document the formatting changes.  For example: lines that were drawn in the report do not come across, there  is a tab in front of each line and a carriage return at the end of each line and spacing and justification formatting are not the same.  Is there a way to export to Word Editable and keep the formatting integrity? This report was developed by a third party but I can edit it if needed.

    Pages 5 is, as an early reviewer put it, "an unmitigated disaster." Not only does it lack some 100 feautres that are present in Pages 09 (4.3), it is also VERY buggy, A quick look through these discussions will reveal a painful litany of data corruption, files that cannot be opened, lost data, and other anomalies. Links do not export reliably to PDFs, and, as you've discovered, export to .docx format is unreliable. Sadly, the best advice is to trash Pages 5.1 and use Pages 4.3 or — yes, it's come to that — Word instead.

  • Layout Problems When Exporting to ePub

    Hi,
    When exporting my document to ePub, I always receive the following errors:
    Export Warning - Some style settings, including multiple columns, table styles, and character formatting, aren’t supported. Your document might look different.
    Export Warning - Headers and footers aren’t supported and were removed.
    First of all, how can I see these on the document? When I look at pages, the layout seems perfect.  Please note that I used Baskerville as the font everywhere, didnt use any multiple columns or tables. There are no footers but only some headers.
    The main problem I have is with the layout. Some chapters need to start on a new page but instead iBooks puts it at the end of the last page. Please check the picture below as what I mean.
    There also is a blank page on the ibooks which I dont know why. It is a single page and it is blank. There are no blank pages on my pages doc...
    Also on TOC, I dont see anything like ''Title Page'' on pages but when I export it to ibooks, on top there is this ''title page'' thing. My book will not be in English so is there any way to delete it from TOC?
    Thank you
    Note: I use Pages v4.3

    Most of us that usually answer questions in this forum don't create ePubs and will have problem helping you. If you don't get an answer here try this forum Creating ePubs. I hope it will help.

  • Audio problems when exporting files from Premiere Pro CS5

    I try to post in English.
    I have audio problems in Premiere Pro CS5 when exporting a film.
    I cut an interview. The sound seems not to be synchronized when exporting a file. It doesn´t matter what file format I export. On cutting points the sound is different to the sound I hear in premiere. In premiere the audio sounds very good but in exported file I hear cracks on cutting points.
    When I reimport the audio file an put it in the timeline the synch point is correct but the interview differs about 2 frames to the original audio in premiere.
    The material was filmed on Sony ex3. The files are XDCam HD. I have updated the production suite.
    Thanks for answers
    Frieder

    Also, make sure that you check the box marked "Export Audio" if you want a MP4 extension.

Maybe you are looking for