Formatting a specific cell

how do i format a specific cell in a JTable? help pls

You can start with the following example:
class MyTable extends JTable {
    // other constructors and methods are omited
    private TableCellRenderer specialCellRenderer = ...
    public TableCellRenderer getCellRenderer(int row, int column) {
        // first check if this is called for the cell you are intrested in
        if (row == ... && column ==...) {
            return specialCellRenderer;
        } else {
            return super.getCellRenderer(row, column);
}For examples how to write you custom cell renderer take a look at http://java.sun.com/docs/books/tutorial/uiswing/components/table.html#renderer

Similar Messages

Linking to specific cells in an Excel spreadsheet no longer working

I use RoboHelp HTML version 7 and just upgraded to MS Office 2007. I have project that contains hyperlinks to specific cells in an Excel spreadsheet using the following syntax: <a HREF="../file_name.xls#cell_name"> (a tip I found on Peter Grainge's website). This worked fine with Office 2003.
With Office 2007, however, the hyperlink opens the Excel spreadsheet to the first cell on the first tab regardless of the the #cell_name suffix. I've tried the following with no success:
delete the .xls baggage file, convert the .xls to the newer .xlsx format, add the .xlsx as a baggage file, rename the hyperlinks to .xlsx (in HTML view), generate new output
same as above but re-creating the hyperlinks (rather than just renaming)
When I preview the topic, the hyperlink is active but does not open the spreadsheet (topic cannot be found). In the generated output, the hyperlink is not even a hyperlink (just plain old text).
Another unusual behavior (I have no idea if this is related) -- before I tried to fix this, when the original spreadsheet (.xls) opened in "compatibility mode," it was not maximized in Excel's window. When I used to open this in Office 2003, it was always maximized.
Does anyone know if the #cell_name suffix works in Office 2007? Is there another way to link to a specific cell?

Hi all
As I understand it, the "X" on the 2007 stuff signifies a format similar to a zipped format. If what I understand is true, it would seem to make sense that this would also somewhat preclude linking in the manner you are speaking of. It would be akin to opening a specific document after first opening the zip archive.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Import from Excel-Mapping Specific cells

I've used the SQL Import/Export tool to import simple Excel data in the past. These were often simple column to table imports...easy mappings. I currently have an Excel spreadsheet kept by our Sales people that needs to be imported. The data in these sheets
are not grouped into simple columns. For example, data values are either horizontal or I need to import specific data FROM cell A4 TO table column 'CCode' and cell A6 to 'CCode'.
The trouble I'm facing is that the import wizard wants to simply map column for column from Excel. Even when I go into, "Edit Mappings" I'm not really finding a way to map specific cell data to the SQL column. Any help would be greatly appreciated...
Excel Example:
SQL Table:

I'm seeing that now. I'll admit the format of the spreadsheet will be changing after I get these imported and moving forward. I should have mentioned this is on an older SQL 2005 server, and am playing around with an Integration Services Project...
Essentially I need to pluck the data in cells A1, C2, A4, C4-E4 and insert those values into an existing SQL table. I've defined my Excel Source. Seeing as the source sheet is a mess and I need to select certain cells (not all are in a neat range like C4-E4...I
have some single cell values I ALSO need to import like A1 & C2) I chose "SQL Command" as my data access mode.
The one thing I can't figure out is how to write a select statement that allows me to select certain cells and a small range of cells. I can select a single value by using: SELECT * FROM [sheet1$A1:A1] OR I can choose a range with the following: SELECT *
FROM [sheet1$C4:E4]...how would I format a select statement that will allow me to pick not only the individual cells but ALSO the ranges I need?
I have tried SELECT...UNION...SELECT but am limited to two select statements and places everything into a single F1 column when I need it in a row view to map with the SQL columns...so each cell I pull has a separate F value so I can properly map the data
to the correct SQL column like the following:
F1 F2 F3 F4 F5 F6 F7
A1 C2 A4 A6 C4 D4 E4

How to get specific cell or whatever is in your datatable?

All there is in my datatable is one value loaded. Here's my code, but how do i convert that datatable to a string?
var fileName = string.Format("{0}\\file.xlsx", Directory.GetCurrentDirectory());
var connectionString = string.Format("Provider=Microsoft.Jet.OLEDB.12.0; data source={0}; Extended Properties=Excel 12.0;", fileName);
OleDbConnection connExcel = new OleDbConnection(connectionString);
connExcel.Open();
DataTable xlsData = new DataTable();
OleDbDataAdapter dbAdapter = new OleDbDataAdapter("select * from [Filters$B2]", connExcel);
dbAdapter.Fill(xlsData);
//Now i want to see that value in xlsData???? or possibly convert it since it is only one cell loaded to a string? HELP?

Hi vkid,
>>All there is in my datatable is one value loaded. Here's my code, but how do i convert that datatable to a string?
About convert datatable to a string, you can use the following code
string res = String.Join(Environment.NewLine, table.Rows.OfType<DataRow>().Select(x => String.Join(" ; ", x.ItemArray)));
But based on your title, How to get specific cell, please check the following code
string value = table.Rows[0].ItemArray[0].ToString();
It means get the firstrow and first column value. You can get the specified cell which you want.
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to select a specific cell in a JTable?

Hi there,
in a JTable, I would like to select a specific cell (to highlight it) from a JButton.
Here a sample code...
Who could help me to fill it?
import java.util.*;
import javax.swing.*;
import javax.swing.table.*;
import java.awt.*;
import java.awt.event.*;
public class TableSelection{
    public static void main (String args[]) {
      JFrame frame = new MyFrame();
      frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
      frame.show();
class MyFrame extends JFrame{
public MyFrame(){
    setTitle("TableSelection");
    setSize(WIDTH,HEIGHT);
    DefaultTableModel myModel = new DefaultTableModel(2,2);
    JTable myTable = new JTable(myModel);
    myTable.setCellSelectionEnabled(true);
    JButton button00 = new JButton("select 0,0");
    button00.addActionListener(new ActionListener(){
      public void actionPerformed(ActionEvent event){
     System.out.println("selection of cell (0,0)");
     //--- what code is required to select the cell(0,0)?
    JButton button11 = new JButton("select 1,1");
    button11.addActionListener(new ActionListener(){
      public void actionPerformed(ActionEvent event){
     System.out.println("selection of cell (1,1)");
     //--- what code is required to select the cell(1,1)?
    Box myBox = new Box(BoxLayout.Y_AXIS);
    myBox.add(new JScrollPane(myTable));
    myBox.add(button00);
    myBox.add(button11);
    getContentPane().add(myBox, BorderLayout.CENTER);
private static final int WIDTH=200;
private static final int HEIGHT=200;
}Thanks a lot for your help.
Denis

Use the addColumnSelectionInterval(int index1, int index2)method ~ http://java.sun.com/j2se/1.4/docs/api/javax/swing/JTable.html#addColumnSelectionInterval(int,%20int)
and the addRowSelectionInterval(int index1, int index2) method ~ http://java.sun.com/j2se/1.4/docs/api/javax/swing/JTable.html#addRowSelectionInterval(int,%20int)
Hope that helped.
afotoglidis

How to print a specific cell in numbers

how to print a specific cell in numbers?

Copy the cell (contents), Paste onto a page of a separate document, or onto a separate sheet of your Numbers document, Print.
Or insert a single cell table onto your Numbers document, type an = sign in the cell then click on the cell you want to print. Drag the new table to a second sheet, set up your page there, and print.
See the Numbers '09 User Guide for other useful tools and techniques. Download the guide via the Help menu in Nuimbers.
Regards,
Barry

How do I name a specific cell in Numbers 3.2.2?

I am working with a multi-table spreadsheet and I want to create a table of variables that are used in a specific formula throughout the spreadsheet. For example, here is the formula I'm working on:
=IF(C32≥321,"23",IF(C32≥281,"19",IF(C32≥241,"17",IF(C32≥201,"15",IF(C32≥161,"13" ,IF(C32≥121,"11",IF(C32≥80,"09","")))))))
Yes, all you database builders out there, it's a wacky way to spreadsheetize an IF, THEN, OR statement - fortunately, I'm only working with numbers. What I want to do is replace the cell values and the "then" result numbers with references from another table. I can't just link to the specific cell by clicking (resulting in something like "<table>::<cell>") because the formula builder spits it out claiming there are too many arguments. Here is an example of what I'm getting at if you replace the first number in each statement with a cell name like "R_1" and the calculated displayed value as "V_1":
=IF(C32≥R_1,"V_1",IF(C32≥R_2,"V_2",IF(C32≥R_3,"V_#",IF(C32≥R_4,"V_4",IF(C32≥R_5, "V_5",IF(C32≥R_6,"V_6",IF(C32≥R_7,"V_7","")))))))
Right now, I have to manually make changes to the formula in one cell then copy it across the other cells in the different tables. I'd much rather have the formula reference specific cells in a variable table so that I can update the values globally. In the "help" for Numbers, it states:
"If the reference is to a cell in another table, the reference must contain the name of the table (unless the cell name is unique within all tables). For example:
=Table 2::B2
Note that the table name and cell reference are separated by a double colon (::). The name of the table is automatically included when you select a cell in another table while building a formula.
If the reference is to a cell in a table in another sheet, the sheet name must also be included (unless the cell name is unique within all the sheets)." (emphasis mine)
However, I can't find any documentation to instruct me on how to create a unique cell name. Any advice?

Hi coop,
coop1108 wrote:
IF, THEN, OR
I think of the IF function as IF(this is true, THEN do this, ELSE do that)
From the Function Browser: type = in any cell, then type 'if' (no quotes) in the search box.
The IF function returns one of two values, depending on whether a specified expression evaluates to a boolean value of TRUE or FALSE.
IF(if-expression, if-true, if-false)
if-expression: A logical expression. if-expression can contain anything as long as the expression can be evaluated as a boolean value. If the expression evaluates to a number, 0 is considered to be FALSE, and any other number is considered to be TRUE.
if-true: The value returned if if-expression is TRUE. if-true can containany value. If if-true is omitted (there’s a comma, but no value) and if-expressionevaluates to TRUE, IF will return 0.
if-false: An optional argument specifying the value returned if if-expression is FALSE. if-false can contain any value. If if-false is omitted (there’s a comma, but no value) and if-expressionevaluates to FALSE, IF will return 0. If if-false is entirely omitted (there’s no comma after if-true) and if-expressionevaluates to FALSE, IF will return FALSE.
Or more to the point,
IF it is sunny, THEN have a picnic, ELSE stay in bed.
Call back with further questions. Maybe a LOOKUP function will work for you.
Regards,
Ian.

How can I upload a video from my PC through I tunes to camera roll on my iPhone? Is there an app or format of specific video supported? Sync from photos include video doesn't work for me.

How can I upload a video from my PC through I tunes to camera roll on my iPhone? Is there an app or format of specific video supported? Sync from photos include video doesn't work for me.

download the new you tube apps in i tunes, in os6 just pick a video in the photos apps and select share, the old you tube app icon will appear

Conditional formatting of a cell based on a value in another cell

I want to change the color of the text in a cell based on the value in a different cell. How can I accomplish this?

drmjdoyle,
There Numbers User Guide, http://support.apple.com/en_US/manuals/#iwork, will show you how to do that. Also, doing a search in these forums will provide many hits answering your question.
Click in the cell you want the color to change: click Format > Create custom cell format, in the first dropdown in that dialog box click Choose Rule, then follow the prompts.
Cordially,
RicD

How do I change the number formatting within a Cell Table in Microsoft Word?

Hi, I was wondering if someone could help me out on an issue I've been having... I work for an accounting firm and we do a lot of financial statements.
I was wondering if we would be able to treat a cell table in Microsoft Word 2007 like I would a cell table in Microsoft Excel. Meaning, I would like to change the formatting of the numbers in the table to the "Accounting" (number) format so it
aligns by the decimal point and use the $ signs and () for negative numbers. We do use the link tables feature, however, most of our balancing pages just can't be done in Excel because of the way the text is written. It would be much harder to format
the text if it were to be typed in Excel. We have also tried creating an Excel sheet within Microsoft Word but it is the same as linking the tables... Again, a text formatting issue. The only option is to use tables within Word but how do we change
the number formatting to a "accounting" (number) format where the numbers would align with the decimal point and use () for the negative numbers. Is there ANY option for us to do this other than manually entering this information in using tabs?
If there are no options other than entering it in manually, please consider this as an option for your next software update. I believe that a LOT of people out there will be interested in this feature... My manager and I just attended a webinar on Microsoft
Advanced Word Tips Tricks and Techniques and 75% of the attending people had this question but no answer.
Thank you very much for your help!!!!!

Word does not really have number formatting for table cells. You can align cell contents on the decimal point, though, by setting a so-called decimal tab stop.
Option 1:
- Select the cells for which you want to do this.
- Display the ruler.
- Click the Tab box on the left hand side of the ruler until the box contains an inverted T with a dot.
- Click in the ruler where you want the decimal tab.
Option 2:
- Select the cells for which you want to do this.
- Click the arrow in the lower right corner of the Paragraph group on the Home tab of the ribbon.
- Click the Tabs... button in the lower left corner of the dialog.
- Specify a tab position in the box, e.g. 1.5".
- Select the 'Decimal' radio button under 'Alignment'.
- Click Set.
- Click OK.
You will have to type the numbers as they should appear, including the $ for currency and the ( ) for negative numbers.
Regards, Hans Vogelaar

How to make specific cell(s) read-only in a data-grid

Hi there!
Is there a way to make an specific cell read-only in a data-grid?
Best regards,
Ciro

Hi !
After some months... here is the solution:
Private WithEvents _gridTaste As DataGrid
Private Sub MyScreen_Created()
AddHandler FindControl("GridTaste").ControlAvailable,
Sub(s, e)
_gridTaste = CType(e.Control, DataGrid)
End Sub
End Sub
Private Sub _gridTaste_BeginningEdit(sender As Object, e As DataGridBeginningEditEventArgs) Handles _gridTaste.BeginningEdit
' I want do set the cell (2,0) as read only:
If e.Row.GetIndex = 2 AndAlso e.Column.DisplayIndex = 0 Then
e.Cancel = True
End If
End Sub
I hope this post help you too!
Best regards,
Ciro

HT3349 How do you select a sub-set of cells from the entire document so you can print only those specific cells?

How do you select a sub-set of cells from the entire document so you can print only those specific cells?

There is no analog to MS Excels print range. So the next best thing is to plan your data so that you don't need to use print range. The next best thing after that is to select the range of cells you want to print, then copy, the switch to the application Preview, and create a new document from the clipboard (select the menu item "File > New from Clibboard") then select all, copy then paste to the destination (maybe an email) .
You can also paste that portion of the table into another table (or a new table) by pasting values only

Is it possible to apply conditional formatting to a cell (or range) based upon a LOOKUP query to cell values in another sheet.? I want to alter the formatting (i.e., text and/or cell background color), but not cell content.

Is it possible to apply conditional formatting to a cell (or range) based upon a LOOKUP query to cell values in another sheet.?
I want to alter the formatting (i.e., text and/or cell background color), but not the content, of the target cell(s).

Hi Tom,
Your LOOKUP formula will return a value that it finds in the "other" table. That value can be used in conditional highlighting rules. (Numbers 3 calls it conditional highlighting, not conditional formatting. Just to keep us awake, I guess, but it works the same).
Please explain what you are trying to do.
Regards,
Ian.

Set color of specific cells in JTable.

I have a JTable where I want to set the color for specific cells. Is this possible to do, and if so, how?

Well, one way is to create a custom renderer that know the background color of each cell in the table. The Swing tutorial on [url http://java.sun.com/docs/books/tutorial/uiswing/components/table.html#renderer]How to Use Table has an example you might be able to build on.
Or, this posting may give you another approach. The key to both solutions is to somehow specify the color for every cell:
http://forum.java.sun.com/thread.jspa?forumID=57&threadID=610474

Import a CSV file into specific cells

Hello,
I have created a simple Numbers template and I want to import a csv file with its values entering specific cells in an automated way.
I think the best way to automate this process would be an AppleScript that does the following:
Selects the csv file;
Parses the values inserting them into the the Numbers template i.e. value1 to cell B2, value2 to cell B3 etc.
Unfortunately I know very little about AppleScript, does anyone have any experience in this area that they could pass on?
My idea would be to place the csv values in an array, and loop through the array entering the values in B2, B3 etc.
Many thanks in advance!
Dougie

Here is a script doing the full job in a single call.
--{code}
--[SCRIPT csv-to-selected-cell]
Enregistrer le script en tant que Script : csv-to-selected-cell.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Utilisateurs:<votreCompte>:Bibliothèque:Scripts:Applications :Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner la première cellule du bloc où vous souhaitez insérer les valeurs extraites d'un fichier CSV.
Aller au menu Scripts , choisir Numbers puis choisir “csv-to-selected-cell”
Le script demande de naviquer jusqu’au fichier CSV.
Il en lit le contenu,
remplace les séparateurs (";" ou ",") par des TABs
copie les données dans le presse-papiers
colle dans la table.
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: csv-to-selected-cell.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select the first cell of the block where values extracted from a CSV file must be inserted.
Go to the Scripts Menu, choose Numbers, then choose “csv-to-selected-cell”
The script urge you to navigate to the CSV file.
It read its contents,
replace the delimiters (";" or ",") by TAB chars
copy the datas in the clipboard
paste in the table.
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2012/01/18
--=====
on run
          local dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2, lesValeurs
          my activateGUIscripting()
Extract parameters describing the target cell *)
          set {dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
Choose the source CSV file *)
choose file of type {"csv"}
Get the file’s contents *)
          set lesValeurs to read result
Grab the delimiter in use *)
          if lesValeurs contains ";" then
          else
          end if
Replace the delimiter in use by TAB *)
          my remplace(lesValeurs, result, tab)
Move the 'normalized' datas to the clipboard *)
set the clipboard to result
Reset the target cell in case something changed *)
          tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
                    set selection range to range (name of cell colNum1 of row rowNum1)
          end tell
Paste matching style *)
          my raccourci("Numbers", "v", "cas")
end run
--=====
set { dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
on get_SelParams()
          local d_Name, s_Name, t_Name, row_Num1, col_Num1, row_Num2, col_Num2
          tell application "Numbers" to tell document 1
                    set d_Name to its name
                    set s_Name to ""
                    repeat with i from 1 to the count of sheets
                              tell sheet i to set maybe to the count of (tables whose selection range is not missing value)
                              if maybe is not 0 then
                                        set s_Name to name of sheet i
                                        exit repeat
                              end if -- maybe is not 0
                    end repeat
                    if s_Name is "" then
                              if my parleAnglais() then
                                        error "No sheet has a selected table embedding at least one selected cell !"
                              else
                                        error "Aucune feuille ne contient une table ayant au moins une cellule sélectionnée !"
                              end if
                    end if
                    tell sheet s_Name to tell (first table where selection range is not missing value)
                              tell selection range
                                        set {top_left, bottom_right} to {name of first cell, name of last cell}
                              end tell
                              set t_Name to its name
                              tell cell top_left to set {row_Num1, col_Num1} to {address of its row, address of its column}
                              if top_left is bottom_right then
                                        set {row_Num2, col_Num2} to {row_Num1, col_Num1}
                              else
                                        tell cell bottom_right to set {row_Num2, col_Num2} to {address of its row, address of its column}
                              end if
                    end tell -- sheet…
                    return {d_Name, s_Name, t_Name, row_Num1, col_Num1, row_Num2, col_Num2}
          end tell -- Numbers
end get_SelParams
--=====
on parleAnglais()
          local z
          try
                    tell application "Numbers" to set z to localized string "Cancel"
          on error
                    set z to "Cancel"
          end try
          return (z is not "Annuler")
end parleAnglais
--=====
on decoupe(t, d)
          local oTIDs, l
          set oTIDs to AppleScript's text item delimiters
          set AppleScript's text item delimiters to d
          set l to text items of t
          set AppleScript's text item delimiters to oTIDs
          return l
end decoupe
--=====
replaces every occurences of d1 by d2 in the text t
on remplace(t, d1, d2)
          local oTIDs, l
          set oTIDs to AppleScript's text item delimiters
          set AppleScript's text item delimiters to d1
          set l to text items of t
          set AppleScript's text item delimiters to d2
          set t to "" & l
          set AppleScript's text item delimiters to oTIDs
          return t
end remplace
--=====
on activateGUIscripting()
(* to be sure than GUI scripting will be active *)
          tell application "System Events"
                    if not (UI elements enabled) then set (UI elements enabled) to true
          end tell
end activateGUIscripting
--=====
==== Uses GUIscripting ====
This handler may be used to 'type' text, invisible characters if the third parameter is an empty string.
It may be used to 'type' keyboard raccourcis if the third parameter describe the required modifier keys.
I changed its name « shortcut » to « raccourci » to get rid of a name conflict in Smile.
on raccourci(a, t, d)
          local k
activate application a
          tell application "System Events" to tell application process a
                    set frontmost to true
                    try
                              t * 1
                              if d is "" then
key code t
                              else if d is "c" then
key code t using {command down}
                              else if d is "a" then
key code t using {option down}
                              else if d is "k" then
key code t using {control down}
                              else if d is "s" then
key code t using {shift down}
                              else if d is in {"ac", "ca"} then
key code t using {command down, option down}
                              else if d is in {"as", "sa"} then
key code t using {shift down, option down}
                              else if d is in {"sc", "cs"} then
key code t using {command down, shift down}
                              else if d is in {"kc", "ck"} then
key code t using {command down, control down}
                              else if d is in {"ks", "sk"} then
key code t using {shift down, control down}
                              else if (d contains "c") and (d contains "s") and d contains "k" then
key code t using {command down, shift down, control down}
                              else if (d contains "c") and (d contains "s") and d contains "a" then
key code t using {command down, shift down, option down}
                              end if
                    on error
                              repeat with k in t
                                        if d is "" then
keystroke (k as text)
                                        else if d is "c" then
keystroke (k as text) using {command down}
                                        else if d is "a" then
keystroke k using {option down}
                                        else if d is "k" then
keystroke (k as text) using {control down}
                                        else if d is "s" then
keystroke k using {shift down}
                                        else if d is in {"ac", "ca"} then
keystroke (k as text) using {command down, option down}
                                        else if d is in {"as", "sa"} then
keystroke (k as text) using {shift down, option down}
                                        else if d is in {"sc", "cs"} then
keystroke (k as text) using {command down, shift down}
                                        else if d is in {"kc", "ck"} then
keystroke (k as text) using {command down, control down}
                                        else if d is in {"ks", "sk"} then
keystroke (k as text) using {shift down, control down}
                                        else if (d contains "c") and (d contains "s") and d contains "k" then
keystroke (k as text) using {command down, shift down, control down}
                                        else if (d contains "c") and (d contains "s") and d contains "a" then
keystroke (k as text) using {command down, shift down, option down}
                                        end if
                              end repeat
                    end try
          end tell
end raccourci
--=====
--[/SCRIPT]
--{code}
Yvan KOENIG (VALLAURIS, France) mercredi 18 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
My iDisk is : http://public.me.com/koenigyvan

Formatting a specific cell

Similar Messages

Maybe you are looking for