Forms 10g rel.2: new behaviour when accessing the db and not logged on

If I start a form and I'm not connected, then I have a problem with one of my standard-logon-routines.
This behaviour is new in 10g rel.2 I think.
If I start a function on the db and the form is not connected I get a FRM-92101 - There was a failure in the forms server during startup...
This is a migrated form, which runs in 6i, 9i, 10g rel.1, but not in rel. 2.
Who nows a workaround ?

see my post in this thread:
FRM-92101 when user tries to log on with invalid password

Similar Messages

  • Why can one mac access the internet and not the other?

    Hi I have just installed a 2nd generation Airport Express base station. I have setup a network and I can connect to it to access the web. Here's the rub, only my Macbook Pro can connect. My Macbook Air cannot connect? A weird error message says (translated from Swedish): Airport has the selfapplied/selfselected IP adress 169.254.67.130 and will not be able to connect to the internet.
    Why can one mac access the internet and not the other? Is there something simple that I can do to get more macs to be able to use my Airport Express to access the internet?
    Tech details:
    Airport Express 2nd generation (just purchased) model 1392
    Macbook Pro running 10.8.2
    MacBook Air running 10.6.8

    It seems the Airbook assigns a dummy IP address so somehow it doesn't reach and receive an IP from the Express. I deleted the previous Express setting restarted the Air connected again, restarted the modem, restarted the Express nothing....
    I spoke to the internet provider and the cable modem does not require any username or pw. from the modem to the cable it's one public ip, pure internet is flowing from the modem to the Express but the express doesn't seem to assign any IP address apart from the one assigned to the Macbook Pro.
    Do you need a screendump of the settings on the functioning Mac or the faulty one? What settings are you interested in i.e. which tab should it shot?

  • New Install - Can access the internet but not with Web Browser

    I just installed Solaris 10 11/06 with my new Ultra 20 M2 workstation. I can ping, complete NSLOOKUP commands on public domain names and can telnet; however, when I try to use the browser it says it cannot connect to the internet. I made sure of the following:
    - Web Browser is not using proxy
    - resolv.conf is accurate
    - defaultrouter is accurate
    - hosts, hostname.. are good
    - netmasks is fine.
    Any thoughts? thanks for your help.

    Is there a firewall between the server and the internet, try telneting the fully qualified domain name again but on port 80 (or 8080) (i.e. telnet www.yahoo.com 80), do you have another machine on this network that can access the internet through a browser (if so check it's settings) also if you have an intranet see if the browser can access that, if these don't work then the problem is settings\config in your browser.
    also try a traceroute and see where the packets are routed and how many hops it takes.

  • Forms 10g rel 1( 9.0.4 ) vs SUN JVM 1.5

    Hello:
    From SUN site you can read :
    "Changes in 1.5.0_06
    The full internal version number for this update release is 1.5.0_06-b05 (where "b" means "build"). The external version number is 5.0u6.
    Security Enhancements
    Prior to this update, an applet or application could specify the version of the JRE on which it would run. This has changed. All applets are executed with the latest JRE version. Unsigned Java Web Start applications that specify a version other than the latest trigger a warning, requiring explicit user permission before the application will run. Signed Java Web start applications are not affected. "
    Assuming that our customer will use SUN JVM , NOT Oracle JInitiator.
    We have seen that if in a client machine it is installed SUN JVM 1.4.2_10 ( certified ) AND SUN JVM 1.5 or newer.
    there is NO WAY to force Forms 9.0.4 applications to run with SUN JVM 1.4.2_10.
    In spite of doing the following settings at formsweb.cfg
    # Parameter related to the version of the Java Plugin
    jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_10
    when you run forms 9.0.4 applications from a browser in that machine, SUN JVM 1.5 is mandatory used by the browser.
    It seems that IT IS IMPOSSIBLE to tell 9.0.4 to use SUN JVM 1.4.2_10 because SUN prevents it according to the above documentation .
    Q1) I thank your comments on this
    Then, when you look for certification info:
    a) you can get this info for Forms 10g R2
    http://www.oracle.com/technology/products/forms/htdocs/10gR2/clientsod_forms10gR2.html
    b) you can get this info for Forms 10g R1
    http://www.oracle.com/technology/products/forms/htdocs/10g/clientsod_forms10g.ht
    ml
    Q2) What are ORACLE plans about certification of SUN JVM 1.5 AND Forms 10g Rel 1 ( 9.0.4 ) ?
    Thanks in advance,
    Fernando Rey

    Hi Guys,
    I am currently testing our portal with a number of JRE version or Jinitiator and the SUN JRE.
    I found some very useful information about changing the registry of the local PC to re-enable specific versioning, see info, below.
    I have tested this and it does work, but you need to be careful with Sun JRE versions to ensure that you are on 1.5.0.7 or higher.
    Another useful link is this discussion over on the sun forums.
    http://forum.java.sun.com/thread.jspa?threadID=730855
    Good Luck
    Scott
    We have found a conflict with the Sun JRE 1.4.2.6 and version Sun JRE 1.5.0.6
    To get around this conflict a registry key has to be added onto the users PC and the user needs to remove 1.5.0.6 and install 1.5.0.7 or higher. To make matters worse the auto-update feature in version 1.4, if left enabled, will update the user to 1.5.0.6 even thought the latest release from the sun web site is 1.5.0.8 !
    Therefore can you add this registry key onto the automated install of the Sun 1.4.2.6 setup as per the instructions below.
    Troubleshooting Conflicting JPI Versions on the Desktop:
    Per oracle note 368775.1, JRE 1.5 will not allow static versions. In other words version 1.5
    may override your required version of 1.4.2. They call it a security feature, but it can reek
    havoc with oracle forms. This section addresses a possible workaround.
    If your users either need to run JPI 1.5 for any reason, here is the workaround to force
    BANNER to use ONLY version 1.4.2.
    If you launch forms and in the java console it shows version 1.5.X, perform the following
    steps.
    1. Make a backup of the windows registry
    2. Edit the registry
    3. Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\
    4. Create a new directory by highlighting the key above and pressing <RIGHT
    CLICK>/<NEW KEY>
    5. Rename the key to [Java Deployment]
    6. Highlight the new key created in step 5 and press <RIGHT CLICK>/<NEW KEY>
    7. Rename this new value to [Policy]
    8. Highlight the new key created in step 7 and press <RIGHT CLICK>/<NEW DWORD>
    9. Rename this DWORD to “EnableSecureStaticVersioning”
    Re-launch forms and verify via the java console that the desktop is returning 1.4.2.

  • Strange behaviour when accessing Oracle 8i table from servlet

    Hi there,
    First a little background, I've got a 2 column table in an Oracle 8i DB that holds a very simple code to word map. There are no strange characters. Both columns are varchar.
    From my desktop machine, when I execute the the following:
    <SNIP>
                OracleDataSource ods = new OracleDataSource();
                ods.setDriverType("thin");
                ods.setServerName("DBserver.db");
                ods.setDatabaseName("DB");
                ods.setPortNumber(1527);
                ods.setUser("user");
                ods.setPassword("password");
                Connection connection = ods.getConnection();
                Statement stmt = connection.createStatement();
                ResultSet res = stmt.executeQuery(SQL);
                CachedRowSet crs = new CachedRowSetImpl();
                crs.populate(res);
                while (crs.next()) {
                    System.out.println("ID: " + crs.getString(1) +
                                       ",  Name: " + crs.getString(2));
                }<SNIP>
    Everything works fine, and I get the results I expect (both return values for getString(1) and getString(2) are exactly as they are stored in the table)
    HOWEVER:
    When I execute the same exact code in a servlet sitting on a Tomcat server (I'm using a simple applet servlet model to access the table and return a response to the applet), crs.getString(int) returns strings like: 0x53, 0x54, 0x4E and so on.
    I am unsure what this means, and would be grateful for any assistance. I am wondering where to start to troubleshoot the problem.

    I suggest you use the name of the field in your getString() so you can be sure what field its getting.
    Example:
    from:
    crs.getString(1)
    to:
    crs.getString("first_name");
    Also, I suggest you get a connection, use it, and close it (along with closing the resultSet and statement) all within a try/catch/finally block. You have to close the connection when you are done with it or you may run out of connections.
    Also, I suggest replacing this:
    CachedRowSet crs = new CachedRowSetImpl();
    crs.populate(res);
    while (crs.next()) {
    System.out.println("ID: " + crs.getString(1) +
    ", Name: " + crs.getString(2));
    with something like this:
    while(resultSet.next()){
    System.out.println("ID"
    System.out.println("ID: " + resultSet.getString("first_name") +
    ", Name: " + resultSet.getString("last_name"));
    }

  • Itunes crash on startup or when accessing the store

    Hi,
    I upgraded to iTunes 12.0.1.26 from iTunes 11.1.1.11 on a win7 sp1 system.
    When I start Itunes, it crashes after a few seconds "iTunes has stopped working...".
    Log Name:      Application
    Source:        Application Error
    Date:          14/01/2015 05:46:13
    Event ID:      1000
    Task Category: (100)
    Level:         Error
    Faulting application name: iTunes.exe, version: 12.0.1.26, time stamp: 0x543e558b
    Faulting module name: WebKit.dll, version: 7537.60.17.14, time stamp: 0x53da8e3b
    I have since then uninstalled all iTunes ansd Apple related software as instructed in Troubleshooting issues with iTunes for Windows updates (uninstall, reboot, regclean, check for remnants and delete them, reboot, reinstall) without any luck.
    Removing the iTunes preference files as instructed in iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support seemed to allow me to start the application but as soon I try to access the iTunes store or log in, the application crashes again.
    I'm out of ideas.

    Update:
    after once more removing all installed Apple products I deleted all folders in c:\programm file (x86)\; c:\users\user\AppData\ etc. that had anything "Apple" or "iTunes" in them ( Apple, Apple Computer etc). Additionally, I renamed any iTunes folder I could find in my media folders.
    So far, I was able to start iTunes 12 and sign in to the iTunes store. I de-authorised all computers and authorised the machine I am sitting at. No crashes yet.
    Now I just need to read up on how to import the music, apps, books and movies I purchased a while back.

  • Itunes stops working when accessing the store what needs to be done to get it working again?

    itune stops working when accessing the store.  What needs to be done to get it working again?

    Hey Baitmaster61!
    Here is an article that will help you troubleshoot this issue:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    If you are still experiencing issues with reaching the iTunes Store, you may also need to reference this article:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • App malfunctions when accessed via URL but not when accessed in workspace

    I have an application that I have built at work. I have it on a test box. I have been using the app for several months with no problem. Because it is on the test box I am able to use the url to log into the app e.g. http://infotest.finone.bankone.net:7777/pls/htmldb/f?p=229
    Today I started having problems with the app not functioning properly for no apparent reason. A file browse upload process stopped uploading the files even though I got no error messages. Editable items stopped passing values to the next page when I click to edit something.
    The weird thing is when I log into my workspace on the test box and then launch the app from there everything works perfectly as before! I went in an deleted and purged all the sessions and then logged into the app via the url again and it worked for a minute then I had problems creep back up.
    This app is supposed to move to the production server soon. Any ideas why this weirdness is happening??!!

    Hi,
    As far as the file upload process...nothing happens and nothing appears in the Web Server Error Log at least not from what I see perhaps I am not looking in the right place. It's like as if the process just didn't actually activate or something although the page does in fact submit because the field values are cleared and the success message I coded in appears. So I know the page is submitted.
    The values being passed were actually part of the Wizard Form/Report on a Table. You click the Edit icon and it passes the value of the PK field to the subsequent field on the next page within the same session ID and fetches the appropriate row from the underlying table.
    So far not a single other person has had this happen to them. Today the app worked perfectly without any of these issues. Can there be local settings on my PC that are conflicting with the session state and other things on the Application? I log in and out of the app close to a 100 times a day, could this be clogging up session id's or something?
    Unfortunately its not consistently reproducible from the standpoint that today its not doing it all but when it was happening yesterday it certainly was consistent so at this point I don't know what to think.

  • HT201407 I have a new device. When selecting the language and country I am trying to connect to a wifi connection and getting the error 'Your Iphone could not be activated because the activation server cannot be reached. Try connecting to your Iphone to i

    I have a new device. When selecting the language and country I am trying to connect to a wifi connection and getting the error 'Your Iphone could not be activated because the activation server cannot be reached. Try connecting to your Iphone to iTunes to activate it, or try again in a few minutes.

    Where exactly did you get this phone?
    Do you have a SIM in the phone?
    There are 2 primary causes for this.
    Either you don't have a SIM in the phone, which is REQUIRED to activate it, or the phone was hacked to unlock it.

  • When accessing the Itunes store on my Touch, I am unable to click "buy now," though I can search and preview items.

    When accessing the Itunes store on my Touch, I am unable to click "buy now," though I can search and preview items.  I have already cleared off and made enough disc space.  Unsure what the issue could be. 

    Logout from your iTunes store account on that device and then log back in to see if that helps

  • ITunes 12 crashes when accessing the store

    I installed Yosemite and iTunes 12.0.1. Since then, it crashes when accessing the store (wolor wheel)
    I re-installed iTunes. It works with my Library when my iMac is disconnected from the net, but as soon as iTunes tries to access the store and refresh iTunes Match… Bang. It freezes again and I have to re-install it (it freezes again when I restart, even when disconnected).
    Ho can I solve this, please ?

    I was having the same issue. iTunes Match had little or none to do with it. Basically anything that required logging into the store (I needed to re auth). Frustrating because iTunes now makes you use your apple id for the tiniest little tasks, and worse yet, it shows logged in, but it really isn't. Anytime I tried to authenticate it would time out and then cause iTunes and a library file to not respond, causing me to force quit. I did notice my wireless connection was suffering. I rebooted my router and tried again, voila! connected and authorized! no time outs! iTunes 12.0.1.26 seems to be a little sensitive to weak connections?

  • My itunes software crashes when accessing the music downloads. I use window 8.1

    Is there a fix for itunes crashing when accessing the music download. I use windows 8.1?

    Hello gaz2243,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Best of luck,
    Mario

  • When I'm on a page with many links it used to highlight or underline the link I was looking at ... so when it opened the link in a new window, I could look back and not lose my place

    when I'm on a page with many links it used to highlight or underline the link I was looking at ... so when it opened the link in a new window, I could look back and not lose my place

    It sounds like you have chosen a publishing template rather than a word processing template. There are two basic modes in MS Word: word processing and publishing layout. Word processing mode (and all word processing templates) have a continuous text box in the page for writing text. The publishing layout mode (and publishing templates) are documents that have text boxes placed for articles, titles, pictures, etc. Be sure to choose the word document template and you’ll get what you expect. Do not choose the word publishing document.

  • ITunes for Windows: Error -9812 when accessing the iTunes Store

    So here is the situation. When I try to access our iTunes U site from the public link it works great, when I go thru the link that has me authenticicate it works on macs but on PC's I get the error message "iTunes for Windows: Error -9812 when accessing the iTunes Store" it's happening all thru our campus with PC users. Any ideas?????

    We're having similar connection issues, and the error log on our web server says something about a certificate error. I noted that last year on this date there were messages related to certificates. Is it possible they are updated every Dec 2, and we should count on some down time?
    Katie

  • Certain Users getting double logon screen when accessing the Portal

    I have about 15 users out of 2500 that are getting the double logon screen when accessing the Portal. It's very intermittent, one minute it works fine the next minute it doesn't. I've tried almost everything on the client side, opened a case with Microsoft. Still no help.
    Does anyone have any ideas on this?

    The users are getting a login page with 2 login boxes. they can login, but it does not single sign them in.
    Yes we are using SPNEGO, and it works for everyone except these users, and it does work sometimes for them
    Yes it is possible these users are using NTLM becasue I see some events in the event viewer on the client indicating this
    You find an event similar to the following event in the system event log:
    Event Type: Warning
    Event Source: LSASRV
    Event Category: SPNEGO (Negotiator)
    Event ID: 40961
    Date: 10/27/2004
    Time: 1:00:50 PM
    User: N/A
    Computer: COMPUTER
    Description: The Security System could not establish a secured connection with the server ldap/DC01.corp.com/[email protected] No authentication protocol was available.
    Edited by: Jeremy Rafuse on Dec 21, 2007 7:26 PM

Maybe you are looking for