Forms 6i query

By default forms 6i did not pass module name in v$session view module column during logon. How can i pass value in module column in v$session view during logon.

You can use dbms_application_info.set_module(get_application_property(current_form_name)) from your pre_form trigger.

Similar Messages

  • Purchase Order form in Query only mode for some users

    Hi All,
    I want to make the Purchase Orders form as query only for a single user. I tried by giving 'Query_only=Yes' in the parameters section. I am getting 'FRM-04151: You cannot query records here' message more than 10 time. I know we get this message and this is applicable to all the users. But this message is comming more than 10 times.
    Is there anyway that I can restrict the Query only mode to a single user and please suggest about the message also.
    Thanks in Advance,
    Naresh

    Naresh,
    Since you want to achieve this for one user only, I would suggest you create a new function/menu/responsibility and assign this responsibility to the user.
    Note: 400380.1 - How To Create a QUERY-ONLY FORM
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=400380.1
    For the FRM error, please review the following document.
    Note: 116074.1 - ACCESS LEVEL - REVIEW ONLY - PO
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=116074.1
    Regards,
    Hussein

  • Purchase Orders form in Query Only mode for a single user

    Hi All,
    I want to make the Purchase Orders form as query only for a single user. I tried by giving 'Query_only=Yes' in the parameters section. I am getting 'FRM-04151: You cannot query records here' message more than 10 time. I know we get this message and this is applicable to all the users. But this message is comming more than 10 times.
    Is there anyway that I can restrict the Query only mode to a single user and please suggest about the message also.
    Thanks in Advance,
    Naresh

    Please post this question here: OA Framework
    There are so many special conditions and restrictions for E-Biz Suite that this forum is not the right place to ask these questions. The Apps forum at this location is the right place.

  • How to put the form in Query mode

    Hello
    Please let me know how to put the form or block in Query mode , so that when i run the form it should be in Query mode . I have seen properties of SET_FORM_PROPERTY and SET_BLOCK_PROPERTY but cannot find one
    Thanks

    QUERY mode? Did you mean, that you can only QUERY without changing data.
    This is the QUERY-ONLY-mode, which can be started e.g. call_form
    this is the help for that topic:
    PROCEDURE CALL_FORM
    (formmodule_name VARCHAR2,
    display NUMBER,
    switch_menu NUMBER,
    query_mode NUMBER,
    data_mode NUMBER,
    paramlist_name VARCHAR2);
    query_mode     
    NO_QUERY_ONLY (The default.) Form Builder will run the indicated form in normal mode, allowing the end user to perform inserts, updates, and deletes from within the called form.
    QUERY_ONLY Form Builder will run the indicated form in query-only mode, allowing the end user to query, but not to insert, update, or delete records.

  • Open form in query mode

    I want to be able to open a form in query mode - is there any way to set this?
    I am using Designer and Headstart.
    Thanks

    Hi Cathy,
    You can do this. See the help topic: About the startup query mode of generated forms.
    Rgds
    Susan
    Oracle Designer Product Management

  • How do I get and pass Master-Detail rowid to another form in query mode?

    I am trying to get the rowid of my master record passed to
    another form in query mode. This is necessary because, I need to
    have a way to show other detail tables for my master record. I
    have been successful in calling the other forms, but only if I
    hard code the rowid(or Primary Key).
    Ultimately a "Tabbed" HTML table for each supporting detail
    table that I have would be perfect. Any help would be greatly
    appreciated. Thanks.

    correct me if I am wrong, is this a 9iAS (Application Server)
    related question? This forum is for 9iAS only.
    Regards,
    --Tao

  • Setting the cell width in a Tabular Form (SQL Query (updateable report) )

    version 3.2.1
    I have a Tabular Form (SQL Query (updateable report) ) and I have a column that is a VARCHAR2(4000) that when displayed extends the cell to the full length (which of course makes sense).
    How can I set the width of this cell to something like 30 or 50 and wrap the contents?
    Thanks,
    Joe

    Scott,
    Thank you for replying.
    Your suggestion kinda worked. I say kinda because when the report is first displayed the cell is the full width and appears to ignore the width setting. There is a Select List on the report to restrict some of the data that is displayed. When a selection is made from this Select List, it appears that the cell width is then adjusted to what was set, but not for every selection from this Select List.
    I made the width entry in Tabular Form Element - Element Width
    Any idea why the width setting is ignored?
    Thanks,
    Joe

  • Developering ADF form in query mode (Oracle forms simulation)

    Hi,
    we have a requirement for developing the existing Oracle form using Oracle ADF. The existing Oracle form displays the form in query mode by default. We can enter the search criteria in any of the text fields and then execute query to get the results. If the user does not enter any search criteria, then the form loads specific record based on default criteria into the form. Could you please help developing similar form using ADF.
    At present I created the view object with one bind variable and dragged the view as ADF form to the jspx page. Then I am launching the form in query mode (executing the find method on the view object using operation binding at the time of loading the page). After entering the query criteria in the form, If I click on a button I am executing a method in the managed bean. In the managed bean I am executing the "Execute" operation on the view and it is working fine.
    But my problem is if the user does not enter the search criteria I have to pass default parameters to the view object and return the default record in the form.
    Can you please help in resolving the issue.
    Thanks and Regards,
    S R Prasad

    Hi Frank,
    Thank you for providing information. I created the query panel with the table by dragging all the named criteria. But this is not the look we are expecting for this form. As we have to deveop ADF form with the same behavior as oracle forms, the user must be in a position to edit the data in the same field as that of query field.
    As an example, we have to design a form for Dept table. We have to display all the columns of the dept view in the form at the time of launching the form in query mode. Once the user enters any search criteria in the form, we have to perform search and display the record(s) matching the query criteria in the same columns displayed in the form. User should not see any changes in the form layout.
    If the user does not enter any data in the form, then we have to display the record(s) in the form with the specific department id(This department id can be calculated based on the data in another table).
    Can you please help us in resolving the issue.
    Thanks and Regards,
    S R Prasad

  • Pass Values to Edit Form thru Query String and Save in List

    I have developed a custom Edit form from SharePoint Designer and I am passing values thru Query String as below;
    http://<>/cli/acc/Lists/GIInfo/testEdit.aspx?ID=262&com=POD_Send
    And, user supposed to save the form directly without changing the values came thru Query String as below. 
    Now, issue is, when user saves the form, values is not getting saved. It saves when we change the value in text box or when we do a text change event in form. Becasue data binding says Text Change even in data binding property.
    __designer:bind="{ddwrt:DataBind('u',concat('ff22',$Pos),'Text','TextChanged','ID',ddwrt:EscapeDelims(string(@ID)),'@Actions')}"/>
    Kindly guide me what is the issue, or correct approach to do that? I want to pass values to Edit Form thru Query string and save in List without changing those.
    -Rajesh A.

    I know this is late, but i found a very good solution on this post and credit goes to the author.
    https://social.msdn.microsoft.com/Forums/sharepoint/en-US/4be1be38-0663-4b80-8f28-45f38f98f9d0/sharepoint-designer-2010-custom-newformaspx-data-in-textbox-fields-dont-save-on-submission?forum=sharepointcustomizationprevious
    The issue was resolved by changing the textbox values,
    <asp:TextBox runat="server" id="ff1{$Pos}" Name="Title" Text="" Value="{$Destination}"  __designer:bind="{ddwrt:DataBind('i',concat('ff1',$Pos),'Text','TextChanged','ID',ddwrt:EscapeDelims(string(@ID)),'@Title')}">
    instead of
    <asp:TextBox runat="server" id="ff1{$Pos}" Name="Title" Text="{$Destination}"  __designer:bind="{ddwrt:DataBind('i',concat('ff1',$Pos),'Text','TextChanged','ID',ddwrt:EscapeDelims(string(@ID)),'@Title')}">

  • Put a form in QUERY mode

    Hi,
    how to put a form in QUERY mode ?
    Many thanks.

    It is F11, type your query, then Ctrl + F11
    Or, click on View > Query By Example > Enter, enter your query, then click on View > Query By Example > Run
    Get all shortcuts from Help > Keyboard Help

  • Calling another form in query only mode

    Dear all,
    Please clarify me which parameters to use while calling another form in query only mode in
    fnd_function.execute.
    Regards,
    Kiran

    Hi,
    According to standard doc:
    When you define a form function in the Form Functions window or call an existing form function using FND_FUNCTION.EXECUTE or
    APP_NAVIGATE.EXECUTE, you can add the string:
    QUERY_ONLY=YES
    to the string in the Parameters field or in the arguments string (using the other_params argument). This argument causes the form to be
    called in query–only mode. The FND_FUNCTION.EXECUTE procedure (which is also used by the Oracle Application Object Library
    Navigator) sets the QUERY_ONLY flag that sets all database blocks to non–insertable, non–updatable, and non–deletable.
    Hope it helps.

  • Quote Form: Repeatively Query gives Error:ORA-06502: PLSQL numeric or value

    Hi,
    I am trying to query the sales order form (in Order Management) with the order number.
    Steps to Reporduce:
    Without closing the sales order form, query the same/different order number repetively again and again (upto 30 times) in sales order form and i am getting the following error. It might be due to the form buffer error i think, but i want to know how to resolve this issue.
    ORA-06502 : PLSQL : numeric or value error
    I have suggested the workaround as closing the form after querying every 15 times, but the customer needs a permanent fix by querying continously without closing the form, they want to query the record. Please suggest how to resolve this issue.
    Thanks

    The errors comes when in variable or fields data is coming more than the maximum length it.
    e.g
    declare
    vcheck varchar2(1) := 'ABC'; ---Errorplz share your code where you feel the problem might occurring usually POST-QUERY trigger.
    Baig,
    http://baigsorcl.blogspot.com

  • Data entry form problem - form in query-only mode

    Hi there,
    I am trying to create an data entry form to insert recordacross 2 out of 3 tables. The last of the four tables already have details and does not need to have record inserted into.
    This is the scenario, my four tables are Factory, Employee, Works_in. Works_in resolves a many to many relationship between Factory and Employee
    Now for a person to be employed in a factory, he must be assigned to a factory.
    I have a list of factories already in the database. After choosing a factory from the database, I want to insert records to do with his Fname, Lname, Hiredate bla, bla, bla to the Employee table.
    I have a single form with Factory as the master, and 2 tabs each for Employee and Works_in.
    After linking all my tables with the ability to choose a factory first on the master form from a combo box and after inserting records into the other forms, it says form running in query-only mode.
    What do you think?
    Many thanks in advance.
    Cube60

    I think that's too much of the wrong information.
    It sounds like you have multiple forms. Are they Modal or Non-Modal?
    What code do you use to call the form that's not working?
    Does it work initially and then stop working?
    James.

  • Called form in query only mode shows messages....

    Hi All,
    I am calling a form (say B ) in query only mode from a main form (say A) . When i query the called form B , i get 5-6 alerts (which has to be acknowledged by the user) and messages of the same error type saying :
    "FRM-40208 : Form running in query only mode . Cannot change database fields. "
    I have a 100 forms to be called from the main form A. So, I prefer not to change anything in the called forms . I tried to set message_level in the form A and code the on-error / on-message triggers to avoid the messages being shown, but nothing is working . Is there anything I can do in Form A i.e the main form ???
    Thanking you in advance.

    Since the error messages are being generated by form B, it is unlikely you will be able to fix form B problem using form A. Unfortunately, you may have to fix each of the 100 called forms.

  • Form auto query works in 10g developer, but not when served by forms server

    I have a form with a master and two detail blocks on the same canvas. When I run it from the developer tool on my desktop, it works great, the master block populates as expected based on the GO_BLOCK and EXECUTE_QUERY statements, and the detail blocks both populate automatically, firing their POST_QUERY triggers as well. When I run it on the server, I have to execute query manually, and then navigate to each of the detail blocks and then execute their queries manually too. When I do that, their POST_QUERY triggers are not firing.
    Desktop is (Windows XP Professional version 5.1 build 2600.xpsp_sp3_gdr.100427-1636 : Service Pack 3)
    Developer version is Forms [32 Bit] Version 10.1.2.0.2 (Production)
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    Oracle Toolkit Version 10.1.2.0.2 (Production)
    PL/SQL Version 10.1.0.4.2 (Production)
    Oracle Procedure Builder V10.1.2.0.2 - Production
    PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
    Oracle Query Builder 10.1.2.0.2 - Production
    Oracle Virtual Graphics System Version 10.1.2.0.2 (Production)
    Oracle Tools GUI Utilities Version 10.1.2.0.2 (Production)
    Oracle Multimedia Version 10.1.2.0.2 (Production)
    Oracle Tools Integration Version 10.1.2.0.2 (Production)
    Oracle Tools Common Area Version 10.1.2.0.2
    Oracle CORE     10.1.0.4.0     Production
    Server version is OAS forms/reports install – 10.1.2.3
    OS – x86-64bit (Red Hat Enterprise Linux Server release 5.4)

    hello,
    does oracle showing any errors in user_scheduler_job_run_details for this job ? I would advise try inserting some debug statement to identify where exactly its stuck. Also please check sample configurations syntax for user_scheduler_jobs.
    Cheers
    Sush

  • 10.1.2 form problem querying master details with underscore

    I have a problem on a form we have were by the user is querying a record and the detail block is bringing through an incorrect record. This occurs on all records that have an underscore "_"
    The form is huge so i am trying to cut down whilst testing but thought i would ask the question to see if its anything obvious.
    basically there are 3 tables all on there own blocks linked by the built in relationships in forms.
    the user queries the top one and the other 2 are set to auto query.
    the problem is with only one primary key that is referenced. This has an underscore in it.
    i.e user brings in top level "1000_0"
    this brings through on all detail records another primary key which is "1000-0" but the top level shows the correct "1000_0".
    Is anyone aware of anything this may be, iwill endeavor to set some testing up.

    ok i have recreated in its most basic concept and still exhibits same problem.
    3 db tables.
    create table testparts
    (part VARCHAR2(50) PRIMARY KEY)
    create table testroute
    (testroutepart VARCHAR2(50),
    testrouteno NUMBER,
    CONSTRAINT pK_testroute_PART PRIMARY KEY (testroutepart,testrouteno)  ENABLE,
    CONSTRAINT FK_testroute_PART FOREIGN KEY (testroutepart) REFERENCES testparts (part) ENABLE)
    create table testroutemat
    testroutepart VARCHAR2(50),
    testrouteno NUMBER,
    testroutemat VARCHAR2(50),
       CONSTRAINT PK_testrouteMAT PRIMARY KEY (testroutepart, testrouteno, testroutemat) ENABLE,
        CONSTRAINT FK_MP_PART FOREIGN KEY (testroutepart) REFERENCES testparts (part) ENABLE
    insert into testparts(part)
    values ('TEST_1');
    insert into testparts(part)
    values ('TEST-1');
    insert into testroute (testroutepart,testrouteno)
    values ('TEST-1',1);
    insert into testroutemat (
    testroutepart,
    testrouteno,
    testroutemat
    values(
    'TEST-1',1,'MATERIAL 1'
    insert into testroutemat (
    testroutepart,
    testrouteno,
    testroutemat
    values(
    'TEST-1',1,'MATERIAL 2'
    commit;Then create a new form.
    This form contains 4 blocks.
    a non db block with one non db item on it where the user types in part.
    then 3 further blocks based on the 3 tables above.
    On the block for testparts this has a default where containing
    part=:ctl.partand a relationship to detail block testroute
    part=testroutepartset this relationship to auto query also.
    Then on the blocks for testroute this has relationship to detail block testroutemat
    TESTROUTE.testroutepart=TESTROUTEMAT.testroutepart and TESTROUTE.testrouteno=TESTROUTEMAT.testroutenoI then have a button on on non db block containing
    go_block('TESTPARTS');
    execute_query(no_validate);you then enter TEST_1 within the non db block non db item. hit button and the other items are shown i.e TEST-1 for the detail items?
    Has anyone any ideas??

Maybe you are looking for