Forms builder 6i starts in minimized window

Hello!
After a properly working installation of Forms builder I suddenly got Forms Builder (version 6.0.8.18.3 on win 2000) as a minimized window (just an icon on the taskbar/Quick Launch) when starting ifbld60.exe. Unable to maximize it to a window on desktop useful for my purpose. Why is it so ? The only changes on my PC are the frequently Windows Update from Microsoft
Tried to reinstall Forms from CD without success.
Runform, Reports and other programs are working OK.
What�s to do. Any ideas from anyone ?
Thanks Bertil

Hi do you have access to metalink? note 351885.1 details how to resolve it.

Similar Messages

Form builder make an error in windows xp sp2 when connecting oracle xe

i have installed the forms from developer 6i and tried to connect to
oracle xe using form builder , the problem was that windows show an error and
it says that an error has occur and we are sorry , do you want to send the message

Hi Samer,
sorry, but I haven't done any character set migration yet. Usually I have used exp/imp to move the data to a new database instance that was created with the new target character set. But with XE you only have the choice between WE8MSWIN1252 and AL32UTF8, you cannot easily create a new instance with a different character set.
This should suffice for most applications. But you have a special case where you run into a problem with a product where you won't get any enhancements for anymore. Forms6i entered extended support on 01/2005.
Perhaps someone else can help you out with the character set migration.
Good luck,
~Dietmar.

How to connect Oracle Form Builder - Oracle Developer Suite 10g - Windows 7

Hi brothers and sisters,
Hope all you are fine. I have installed Oracle Developer Suite 10g on Windows 7 successfully and it is working properly. But when I connect to Oracle Form Builder using Connect window asking:
a. User Name
b. Password
c. Database
a message box appear: 'ORA-12154: TNS:could not resolve the connect identifier specified'
I verify my Connect String with: 'SELECT * FROM v$database', but the problem remain the same.
Please help me how can I connect to Oracle Form Builder.
Noor

hi
plz use Net Configuration Assistant or set tnsnames.ora with connect string and computer name.
Net Configuration Assistant.
when its opened then go to .
*Local Net Service Name Configuration.
*Click Next.
*Add.
*Click Next.
* Service Name--Type here connect String which is XE or any Connect String.
*TCP.
*Click Next.
*Host Name--Enter here Computer name or Ip address.
*Yes,Perform a test.
you can enter correct password and username here.
Note:- your Database should be Up if its not Up it will through the same error so plz startup your database first.
sarah

Run Form in Form Builder 9.0.4.0.0

Hi All:
I have installed developer suite with form builder 9.0.4.0.0. Installation was successful but when i run a form from form builder it opens a browser window having address of html file resides in my c:\documentsandsetting \username\localsetting\temp\xxx.htm. Actually this htm file is created dynamically in specified location with different names on different requests and then open actual form having address http://host:port/forms90/f90servlet. (i didn't see this behaviour in 9iDS).
Actually my problem is that my browser didn't get first address (c:\documentsandsetting\username\localsetting\temp\xxx.htm) correctly when i press "RUN FORM" button in form builder it contains http://%%20c:\documentsandsetting\username\localsetting\temp\xxx.htm and because of this address my actual form is not shown. If i ommit http://%%20 manually from address bar and press enter then my form runs perfectly.
Please tell me is there any solution exist for this problem.

Thanks Ronald for ur reply but unfortunately this method didn't work. I have changed my browser setting as follows
-ActiveX controls and plug-ins
* Download signed ActiveX controls
Enable
* Download unsigned ActiveX controls
Enable
* Initialize & script ActiveX controls not marked as safe
Enable
* Run ActiveX controls & plug-ins
ENable
* Script ActiveX controls marked safe for scripting
Enable
and even after i have restart my form builder and oc4j instance i have faced the same problem.
Plz. let me know is there any other solution exist.
Regards
Sam

Error starting Forms builder 10.1.2.0.2

Dears,
I just installed Oracle developer suite 10.1.2.0.2 on my xp sp2 machine. When I start the forms builder, I get a window error Oracle forms designer has encountered a problem and needs to clise, when I click on error report contents, it shows the problem in:
Error signature
AppName: frmbld.exe
AppVer: 10.1.2.0
ModeName: usp10.dll
ModVer: 1.420.2600.2180
Offset: 00032645
I tried de-install / install from different version and I get the same error, at the end I de-installed Oracle server 9i r2 from my machine, and tried to re-install developer suite complete again, but facing the same issue.
I had this version working before in previous installation, but I don't know what changed, and my windows version is very stable.
Could you please help, and add any suggestion, otherwise I will have it the hard way and re-install windows, which I really not in the situation to waste more hours for its setup & other application.

Dears,
I solved the issue by replacing usp10.dll in windows, with the help of this article http://home.clara.net/bauhahnm/Khmer/usp10.html
Thanks

Start Forms Builder

Hello,
how to start Forms Builder in 11i apps,
what env vars should i source ?
thanx

how to start Forms Builder in 11i appsForms Builder executable file:
Unix/Linux: f60desm
Windows: ifbld60.exe
what env vars should i source ?
Unix/Linux: $APPL_TOP/APPSORA.env
Windows: %APPL_TOP%\envshell.cmd

Running oracle form builder 10g in windows 7 64 bit

i am working in windows 7 64 bit
oracle db 11g enterprise edition 11.2.0.10 64 bit
form builder 10.12.0.2 32 bit
my default browser is Google Chrome
i have java 6 standard edition 1.6.0_34
when i am trying to run any form this message appear " java (TM) is required to display some elements in this page"
what can i do to run those forms?

You can also refer to this OTN reference:
Oracle Application Server 10g (10.1.2) Certification Matrix
Other comments:
1. I would not recommend using Forms 10.1.2.0 with Oracle DB 11.2.x. Patching Oracle Forms to 10.1.2.3 would be recommended. Using version Forms 11 would be better.
2. Attempting to use the Developer Tools on Windows 7 is not a great idea although it can be made to work. Developer Suite 10 is no longer supported and was never really intended for use on Win7. Again, patching to 10.1.2.3 is recommended and required if you plan to follow the Oracle instructions and certifications.
3. Installing the Forms Builder (Developer Suite) on Win7-64bit is not at all certified and was never supported.
4. Using Java 7 was not certified and therefore not supported for use with Forms 10.x
In general, Forms 10.1.2.x has been desupported. Customer using this version or older should be working on a migration plan for getting to the latest supported version which is 11.1.2.1.

Forms Builder 10.1.2.3 Crash in Windows 7

Followed the installation steps mentioned in metalink note: 559067.1 [How to Install Developer Suite 10.1.2.3 on Windows Vista or Windows 7 ].
Followed the installation steps till point 7.
After the installation when I tried opening the forms builder (ORACLE_HOME/BIN\frmbld.exe) it immediately crash after oracle logo with the error message "Oracle Forms Designed had stopped working"
Machine details:
Windows 7 Ultimate 64bit
Macbookpro 2012
This is urgent. Any quick help is highly appreciated.
Thanks
Lakshmanan AK

I've installed Oracle Developer Suite (ODS) 10g R2 on numerous Windows 7 systems and have only encountered an issue with Forms Builder crashing a couple of times. Each time, I've been able to resolve the problem by modifying the OS PATH environment variable to ensure there is not a conflict between Oracle versions. If you only have ODS 10g installed, this should not be a problem, but if you have different versions of Forms installed - this could very well be the problem. My you might want to take a look at the OS PATH and make sure all Windows related directories are listed first. Then list the ODS directories second and lastly, list everything else. Oracle has a bad habit of putting it's program directories before the operating system directories.
It is also possible that your installation media is bad since your install is crashing in Windows XP mode as well. That being the case, you may want to download the installer again.
Craig...

Oracle 10g Forms Builder in Windows 7

Oracle 10g Forms Builder crashes whenever we try to open existing 10g fmb files.
is Windows 7 certified to run Oracle Dev Suite 10g and/or are there patches required to run this in the said OS?

Hi,
Thanks a lot for using our community.
Please note that your posting has been moved to the "Oracle Developer Suite (Forms、Reports、Designer)" Community to better deal with your topic.
Thank you and best regards,
Saravanan - Database Administration Community Moderator

Oracle forms builder - windows or unix?

Until recently we've been developing on Forms Builder 6i on our Sun/Solaris box. Now however, we want to move to developing using Forms 10g. We've already recompiled all our forms on the unix box, which has Application Server 10g and an 11g database. Do we stick to using the version of Form Builder on the unix box, or go with the Windows forms? I'm not keen on the unix version, never have been - it's rather clunky, but all our forms/libraries source code is on the server. What do people generally use? I've been ftp-ing files but this is no good longer term - is it best to go with a samba share?

Thanks Tony,
Yes we do still want to deploy on unix. Up until now we've been using unix source control to book modules in and out, as well as using the unix version of form builder. We don't have any other source control software so we'd still need to book in and out on unix. I'd still like to use the Windows forms builder, but we'd prefer to avoid having multiple copies of the source code on windows.

Oracle Forms Builder in Windows Vista

Hi.
I have Windows Vista and when treatment to connect to me with Forms Builder vers. Forms [32 Bit] Version 9.0.4.0.19 generates to me east error according to the tests that I did has something to see with OCI_7 can help me please.
The error is:
ORA-00604: error occurred at recursive SQL level 1
ORA-01009: missing mandatory parameter
Thank you.
Harold Hernan Gonzalez Potes
Colombia

Forms Builder vers. Forms [32 Bit] Version 9.0.4.0.19 is not certified to work with Vista. See
http://www.oracle.com/technology/products/forms/htdocs/10gR2/clientsod_forms10gR2.html

Is Oracle Forms builder version 10.1.2.0.2 certified with Windows 7 ?

Hello
I need to change my old PC that is running 32 bit XP.
On this PC , I have installed Oracle Forms builder 10.1.2.0.2
I need to keep this version of forms as my customer is running the same version on linux.
I wish to upgrade my PC and install Windows7 (32 bit ) . Is Windows7 certified with Oracle Form builder 10.1.2.0.2?
Thanks
John Hall
Edited by: user2537956 on 20-May-2010 02:14

Hello Sunny,
I just asked that same question in a service request a few days ago and got this answer from Oracle Support:
Question "Could you please also check if Forms/Reports Builder *10g* (10.1.2.3.0) are being certified for Windows 7 (32- and 64-bit)? As far as I know Forms/Reports Builder 10g are currently not certified for Win7 at all."
ODM Answer / Action Plan:
"According to product management and http://www.oracle.com/technology/products/forms/htdocs/10gR2/clientsod_forms10gR2.html , Windows 7 is certified as a client platform for 10.1.2.3, however production runtime deployments on Windows 7 is not supported for this version. You can build your Forms applications using Forms Builder on Windows 7 and test it, but when it is time to deploy it in a multi user environment, it needs to be deployed on a supported production deployment. So it should be ok to install iDS 10.1.2.3 on Windows 7 and develop your applications. The installation should be according to How to Install Developer Suite 10.1.2.3 on Windows Vista (Doc ID 559067.1). The note is for Vista, but the instructions apply for Windows 7 as well."
So I'd assume Windows 7 to be supported as well with Forms and Reports Builder 10.1.2.3.0.
Regards
Andreas

Problem starting XML Forms Builder

Hi
I have a SAP EP 6.0 SP2 Patch 28 portal where I newly implemented the how to guide "How To Secure Permissions fro Initial Content In SAP EP 6.0 SP2".
In this guide I need to create a new Content Manager role, due to a SAP Note 775117.
All this seems ok, but now I am not able to start the XML Forms Builder.
I am getting an error message that says something about the <b>"Access is denied:com.sap.portal.system/applications/com.sap.km.cm/components/xfbuilder - security zone:medium_safety/Com.sap.km.cm"</b>
I have tried out several ways, then the recommendation, of implementing to get this application to be loaded, but unfortunately - this does not work.
Have anyone else reach some problem regarding this issue??
Regards
Kay-Arne

hi
navigate to systemconfiguration security Zone and to the folder as specified and change the security zone to low safety .also check with acl editor
With regards
subrato kundu

Reg: To open a Browse Window Using Form Builder

Dear All,
I am trying to open a browse window using form builder.I am using forms 10g.
I have user the following code.
Declare
l_file_name Varchar2(383);
Begin
l_file_name := webutil_file.file_open_dialog( );
If
l_file_name Is Not Null
Then
If
:images.Rowid Is Not Null
Then
create_record;
End If;
client_image.read_image_file ( l_file_name, Substr ( l_file_name, Instr ( l_file_name , -1 ) ), 'images.images' );--block.item
End If;
End;I have attached the webutil.pll in attached library.
It shows an error" WEBUTIL Object group not attached to this form".
Can any one help me how to attach that object group.
Thankx in advance.
Cheers,
Jai.

write this in your 'Browse' Button's , when_button_pressed trigger
DECLARE
filename VARCHAR2(500);
BEGIN
filename:=GET_FILE_NAME(' ',NULL,NULL,'Choose any directory.',OPEN_FILE,TRUE);
:txtbx3:=filename; -- Here you will assign to you form's field.
END;Edited by: Tuts009 on May 10, 2010 5:00 AM

Hang Form Builder 10.1.2.3 for fmb files more than 2MB at Windows VISTA& 7

Hi
When i open fmb files more than 2MB with Form Builder (10.1.2.3) at Windows 7 form builder Hange and Close.
Please help me if have any configuration or patch for forms builder.
Regards
Adel

hi
i think thats the VGA card problem check for compitible Driver.
sarah

Forms builder 6i starts in minimized window

Similar Messages

Maybe you are looking for