Forms popup help - module implementation name must equal module short name.

I don't know if this was blatanly obvious, or if it has been already stated, but just in case it wasn't, I'll state it here.
Here is something that I noticed while trying to make the help system work. I found that the module's short name is stored in the CG_FORM_HELP (or any alternative name that one may use) table. However, when the form is generated, the key-help trigger sends the module's implementation name (only on property palette) to the procedure which calls the help form. I had modules with short names differing from the implementation name, and was forced to change the implementation name to match the short name in order to make the help system work correctly.
If anyone has problems with the user/help text from their modules, module components, and items not displaying (and maybe just the user/help text from the base tables showing up), then you may want to look into this.

I forgot to state that I was using Designer 6.0 Patchset 4 (6.0.3.8).

Similar Messages

  • Change My Home Directory Name to Match My Short Name

    Somewhere in the process of Migration and Setup Assistant accross 3 computers, I need to change my home folder name to match my shortname. It is getting a little confusing to have two short "names."
    My home folder is - admin
    My short name is - bobbyv
    I would like tho change my home folder to bobbyv
    The admin account as you can guess is root, i have two other accounts, one that is admin and one that is not. I know about the advanced options in the accounts preference pane, but I do not want to change in without knowing what I'm doing because I do not want to have an empty and clean new home folder, my data is important.
    Thanks everyone.

    Changing the short name is possible, but it is rather involved. Search for "change short name" on this site. It's easiest to create a new account and then transfer your data to that account.

  • Chnaged user name on machine but short name is greyed out

    hello
    i just put my old computer at another desk. on my new compter i entered in all my old info into the new computer.
    i went back to the old computer and changed the passwrod, etc for that machine. when i changed the user name, it let me, however the sort name remins the old one. is there a way to fix. its now confusing on the network.
    also, can i have a folder in an account a nd password protect it so no ome can open it not even the logged in user?
    thanks
    wayne

    My Mac Genius recommends against changing the short name. Some programs like Mozilla depend on the short name not changing.
    Make a new user. Move your stuff over there --> VIA --> the [hard disk] / USERS / SHARED user. Use the program BATCHMOD to change ownership. It's more reliable than the Finder at changing ownerships in my experience.
    Download BATCHMOD here http://www.macupdate.com/info.php/id/6440

  • PP Module implementation with out CO Module

    Hi friends,
    We are facing problem in implementing PP module because of CO areas.
    Here we are not implementing CO module so we have not defined controlling areas and cost centers etc.
    But we are getting problem related to CO in PP implementation.
    for that we want to know what major configuration settings should we fallows (related to production planning).we are facing problem while converting planned order to process order, it is asking about controlling area. How to define a resource without cost center.
    Please tell us.
    Mr Jitendra

    Hi Jithendra,
    Defining of controlling area,cost elements,cost centres are bare minimum requirements for PP - FI integration even if do not implement CO module.
    Incase you have product costing requirements you will require extensive integration with CO module.
    Regards
    Venugopal

  • What is the equalent module for SAP BASIS in ORACLE

    Hi,
    This is Krishna, i am new to Oracle, i am working as SAP BASIS Consultant and now i am planing to shift oracle please anybody help me " what is the equalent module for SAP BASIS in *Orcale*?".
    Thanks in Advance to Everybody.
    Krishna,
    SAP BASIS Consultant
    Edited by: user12292549 on Nov 30, 2009 11:41 PM

    Hi,
    Just use Trinidad's, I don't think 11g has an equivalent and Chris suggestion won't really work in this case as visible="false" is the same as rendered="false" for decoding purpose and you want it to be decoded in your case. Another poor man's solution would be
    <af:inputText value="..." inlineStyle="display:none;"/>Regards,
    ~ Simon

  • Changing Short Name

    Is there a way to change the short name on your Mac without reformatting the computer?

    Karen is absolutely correct. You cannot change a short name in Tiger. I copy and pasted this from my Tiger Help Viewer:
    "You can't change the short name for a user account after the account has been created. If you need to change the short name, you must delete the account and create a new user account with a new short name."
    The app she suggested at Version Tracker should do the trick and I am grateful that she had that information as I wasn't aware it was available!
    Carolyn

  • How can I change the "short name" of my account?

    I want to change the short name of my account because when my dad bought this computer for me he set up the account with his name as the short name and it has been bothering me ever since.
    When I go to system preferences and then accounts my account is listed and when I click on it under password I am able to change my name, but not my short name because it is greyed out and cannot be clicked. Is there any way to change the short name on my account? I can't even delete my account and make a new one because the account delete button is greyed out when I click on my account.
    Also, I went to my home folder and changed that from my dad's name to my name. This has reset every program on my computer to default settings! For example when I open my Safari browser a message pops up saying a keychain cannot be found to store Safari and asks me if I want to restore default settings.
    So pretty much I've tried to change the short name on my administrative account, I reset everything to default settings and my short name is still my father's name. Can anyone help me out here?

    Try this.
    Or you could just create a new account and delete the old one.

  • Best Practice: changing a user's short name?

    I administer the OS X Servers and user accounts at my school, where typically a few teachers will come back from the summer having gotten married and changed their names.
    We use a standard for usernames of first letter of first name and last name, where Ann Smith is 'asmith' - when she goes and gets married and wants to be 'ajones' at the beginning of this year, what is the best way to go about this change?
    Users have network homes, and IMAP email is on a separate server. Here is what I was thinking:
    For the user's files, make a new user with their new username, 'ditto' the contents of the old username's home folder to the new username, and chown/chmod the new folder's contents to match the correct permissions.
    For the user's mail, use SirAdmin to add ACL's to the old username's mail folders to be able to read them as the new username, have the new username set up their mail and copy the contents of the old username's mail to their new IMAP folder(s).
    Does this make sense or is this far too complicated?
    Do I just tell these users to log in using their old name and burn their essentials to a DVD and just worry about helping them with their emails?
    Any and all suggestions would be appreciated -- thanks
    BC

    Hi Blair
    These look like good methods to me and should work. You could consider creating a second short name - something suitable like their first name instead? Enable Mobile Account (PHD) for the affected users and log in using that short name. Their account should now be created locally as well.
    If you have only a handful you could use a spare machine to do it with yourself? More on this later.
    If you these users have IMAP accounts you could enable POP for them as well. As you/they log in to download from the server their current home folder their mail should be downloaded also.
    What you have after that is effectively a back up of their home folders and mail kept locally on a client machine or a designated machine you decided to use. Delete their account, create the new long and short names, create the additional short name (exactly as it was before), log in with those details and upload the locally stored information back to the server. There should be no need to worry about permissions etc.
    What you could do is send an email to the affected users outlining the steps they need to take to achieve what you want. Minimal effort with maximum gain.
    When you are happy kill the mobile account option as well as deleting the additional short name. Send another mail advising they use the first short name for logging in. There'll be a little tidying up to do in deleting the locally created home folders but you can do this at your leisure using VNC.
    I would have in place one of the other methods as well - just in case.
    Tony

  • Change user's short name?

    Hi and thank you in advance for any assistance you may give.
    I am administering a group of computers for an office of about 20 architects. There is an XServe running 10.5.8 server. One user, when her server account was set up years ago had her name misspelled (Katie instead of Katy) on her server account. This has caused a few problems.
    In an attempt to resolve them I went into the Workgroup Manager, changed her account's name and added a short name which included the correct spelling. The services she accesses are file sharing and calendar, she is running 10.7.4 on an iMac.
    iCal, unfortunately, when I set her account to use the new short name, does not work and gives a 403 error. Setting the account to the previous short name works fine.
    I do not seem to be able to delete the old incorrect short name from her profile on the server. Is there a way to do this, and will this allow the new short name to work in iCal? Will it cause other issues?
    Any replies much appreciated.

    Hi baobhanjex!
    Here is a direct link that usually works, to the utility ChangeShortName by Dan Frakes.
    Read all of the instructions carefully, and proceed cautiously, as an improper change can result in unwanted results.
    Such as;
    Return to Default Desktop, Apparent "Loss" of Home Directory
    Mac OS X 10.3 Help: My home folder and desktop are different than before
    Also, here is a KB Article on How to change user short name or home directory name.
    ali b

  • How could I change the name of Short Name?

    I have some trouble on name creation on 10.4. I am a computer admin in my company. Everytime we bought new Mac, I will give a Short Name to the computer which is a part of new system setting. My difficulity is, I need to change the name frequently when the machine swap to a new user. How should I change the Short Name instead of reinstall the system?
    Thanks a lot for your help!
    Felix

    To change an account's short name, log in from an administrator account and then open the NetInfo Manager application in the /Applications/Utilities/ folder. Change the old name to the new name in the admin group, as well as that user account's name and home properties; don't alter or delete any other accounts, groups, or properties. Next, open the /Users/ folder in the Finder and rename that account's home folder so that it has the new short name. Log out and back in.
    (11684)

  • Change (rename) short names on existing Users

    Working on the Workgroup Manager with the Apple XServer 10.4.10, and I wonder if there was a code or script to change the “short name” of the users accounts as well as having the new (rename)“short name” stay the default short name. I don’t want the “old” short name to exist on the user account. Is there a process through the terminal program I can make this change?
    Thank you,

    The simple answer is 'no.' But if you're really bent on it, Apple documents the process of creating a new user and integrating the old user's files. http://docs.info.apple.com/article.html?artnum=106824 (updated 2005 so i assume the process has not changed)
    I believe this is targeted at OS X client, as a standalone. The process for an OpenDirectory account may differ.
    Also, there is a utility called ChangeShortName that supposedly automates this process at www.danfrakes.com. I haven't run it and I believe it's intended for standalone OS X clients -- I have no idea what it'd do on a server. I think it's one of those "run at your own risk" things.

  • Changing concurrent program,executable short names

    hi,
    i created one report and registered in apps, with some executable short name and concurrent program short name.
    now i want to create a new program with the same short names, and no need of the first report.
    how can i do it?
    can anybody plz give any clue.
    with regards
    kiran

    You can not have two concurrent programs with the same short name but you probably already know that from trying it. Since you need a new program with the same short name and you don't need the old program, simply rename the program and description of your existing program. You will have to change the executable to point to the code of your new program.

  • Documentation Help on E-Recruitment module implementation

    Hi Experts,
    I need Documentation related to implementation of E-recruitment Module in EP and also its features and benefits.
    Help needed urgently.
    Thanks & Regards,
    Shailesh Nagar

    It depends upon the Business packages you are using, E-recruitment version and the application modes (webdynpro and BSP's).
    If you are using mySAP ERP 2005 Business Package version 1.0, check this [documentation|http://help.sap.com/saphelp_erp2005/helpdata/en/31/3a1665fe7741d5b6501cd505a6bd82/frameset.htm]
    The above documentation is based on webdynpro version.
    Check this [documentation|http://help.sap.com/saphelp_erp2005/helpdata/en/43/0fa05e9e242a8be10000000a1553f6/frameset.htm] for BSP application modes.
    Regards,
    Anil Kumar

  • TFS Build Error - Exception Message: The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters

    I am trying to set-up CI of Orchard CMS and deploy it on Azure using TF service. I am stuck at following error for path being
    longer than 260 characters. However, when counted the total characters in path are 235. Please see the below error :
    Other Errors and Warnings
    1 error(s), 1 warning(s)
    Exception Message: TF400889: The following path contains more than the allowed 259 characters: drop/_PublishedWebsites/Orchard.Web_Package/Archive/Content/C_C/a/src/projects/Orchard/dev/DevAltaf/Orchard/src/Orchard.Web/obj/Debug/Package/PackageTmp/Modules/BrentApart.BannerManager/Scripts/controllers/bannerAssignmentController.js. Specify a shorter path. (type VssServiceException)
    Exception Stack Trace: at Microsoft.TeamFoundation.Build.Workflow.Activities.FileContainerDropProvider.EndCopyDirectory(IAsyncResult result)
    at Microsoft.TeamFoundation.Build.Workflow.Activities.CopyDirectory.EndExecute(AsyncCodeActivityContext context, IAsyncResult result)
    at System.Activities.AsyncCodeActivity.CompleteAsyncCodeActivityData.CompleteAsyncCodeActivityWorkItem.Execute(ActivityExecutor executor, BookmarkManager bookmarkManager)
    Inner Exception Details:
    Exception Message: The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters. (type PathTooLongException)
    Did anyone came across such issue while deploying Orchard on Azure with TF service? If yes, how did you sort this freaking error?
    Thanks,
    Altaf B.

    Hi AltafB,
    For your situation, you can short the path for the source code. Or use a short path for build agent folder in your build definition. You can refer to the links below to solve your problem:
    http://blogs.msdn.com/b/aaronhallberg/archive/2007/06/20/team-build-and-260-character-paths.aspx
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/1638a5f0-9321-4ff9-9ee7-6d347badb972/please-some-solution-to-the-specified-path-file-name-or-both-are-too-long?forum=tfsbuild
    Besides, since you deploy Orchard to Azure, you can also publish it directly using publish profile in Visual Stduio or WebMatrix directly.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Why java file name and class name are equal

    could u explain why java file name and class name are equal in java

    The relevant section of the JLS (?7.6):
    When packages are stored in a file system (?7.2.1), the host system may choose to enforce the restriction that it is a compile-time error if a type is not found in a file under a name composed of the type name plus an extension (such as .java or .jav) if either of the following is true:
    * The type is referred to by code in other compilation units of the package in which the type is declared.
    * The type is declared public (and therefore is potentially accessible from code in other packages).
    This restriction implies that there must be at most one such type per compilation unit. This restriction makes it easy for a compiler for the Java programming language or an implementation of the Java virtual machine to find a named class within a package; for example, the source code for a public type wet.sprocket.Toad would be found in a file Toad.java in the directory wet/sprocket, and the corresponding object code would be found in the file Toad.class in the same directory.
    When packages are stored in a database (?7.2.2), the host system must not impose such restrictions. In practice, many programmers choose to put each class or interface type in its own compilation unit, whether or not it is public or is referred to by code in other compilation units.

Maybe you are looking for