Formula in Excel Sheet shows #VALUE!.

Hi,
I have 11gr2 Forms/Reports with Windows Server 2008 64-bit.
I have Excel sheet imported from Oracle Reports with destype=enhancedspreadsheet.
Problem is in my Excel sheet, that when I add formula to multiply two columns, it shows #VALUE! error, which is actually occurs
when we multiply a text column with number column.
Although values in columns in number format (like 8600.000,45.000), it assumes these as text column and when
I re-enter same values in columns manually, formula column shows result without any error.
Is there any settings in REPORTS to avoid this error ?
Thanks with Regards.
Bhatt.

Tom,
This may seem like a stupid comment but have you checked to see if the excel formulas were put into the layout in the layout definitions screen and not in the layout while executing the layout? Also does the layout have dynamic columns?
For example, if I have 12 Dynamic columns for the periods of the year based on a variable it would only show up in the layout definition screen as 1 data column but would be 12 columns on executing the layout and thus the Excel Formula need to be in the 13th column rather than the 2nd column
Hope this helps,
Mary

Similar Messages

Problem in exporting ALV Report to excel sheet

Hi All,
I have developed a Report and now facing problem in exporting the same to excel sheet.
When we click the "Locate File" icon in the report layout, the system will pop up a window with radio buttons. I have opted for 'Spreadsheet'.
When i save the excel sheet into my desktop, the excel file has all the report headers (Title of each column). But no value is exported.
There are around 15 columns in the report and the excel sheet shows value of last 2 columns which has some text.
I have been into ALV report development and developed around 30+ reports in the same fashion.
What might be the reason behind this issue?
When i export other reports into excel sheet, everything is perfect without any flaws......
Kindly help me out......
Regards
Pavan

Hi,
Here's my suggestion: Install OpenOffice.org and ask SAP to deliver good integration with OpenOffice.org.
Alternative suggestion: re-install SAP Gui on the PC where the integration is not working. If that does not help, re-install Microsoft Office as well.
Here's my comment: I think you should ask this question in a different forum, e.g. in the Duet forum. That may not be the correct forum either, but as it is a Microsoft/SAP integration technology forum, someone there may know the solution.
Regards,
Raj.

How to Get the excel sheet formula from the server side into the j2me app?

How to Get the excel sheet formula from the server side into the j2me application?
Here the excel sheet is in server side.i want to do get the excel sheet values (only some part of the excel sheet based on some conditions) from server side into j2me.In j2me I want to done some client side validation based on the formula of excel sheet.Then i resend the new updated data to the server.
But here deosn't know any mehtod to get the excel sheet formula from server side.So kindly help me to get the excel sheet formula from the server.
So how to get the excel sheet formula frome the server side into j2me Application...
Plz guide me to solve this issue...
thanks & regards, Sivakumar.J

You should not post a thread more than once. You've crossposted this question to another forum. I have deleted that one.

Formatting problem in download report into EXCEL Sheet

I have requirement that the Column in the report have values as 1.50,1.5,3.50,when i'm downloading the report into Excel sheet,The values are rounded and appearing as 1.5,1.5,3.5.
Can anyone please let me know how to resolve this requirement

hi,
1) Excel will not take zero's after decimal(1.50) it will roundup(1.5) the values.
2) you can do like in formula section use CAST(column_name as CHAR) and download it to excel then u will get the zero i think...i didn't tried
or Column properties--->Data format --> Select Number--->use 1000's Seperator for 1 decimal and save the report and download it
but it should work!
thanks,
saichand.v
Edited by: saichand on Oct 27, 2009 4:11 PM
Edited by: saichand on Oct 27, 2009 4:12 PM

Excel sheet - Planning function

Hello,
I don't know if this is the best place to put this topic but i don't know where to put it.
It's like this, i have a planning function in SAP BW that shows some data in a excel worksheet. i pass a month and he makes that worksheet. What i want is to in the excel sheet i have a line that says all the months and in lhe line under i have a value for each month. I want to lock the cells of the values that are associated to the months that have passed.
like this:
i pass to the planning folder the month 4(Apr) and i want that when the excel sheet shows up, the values corresponding to month 1(jan),2(fev) and 3(mar) appers locked.
thanks,Ricardo

You can use data slices to create this functionality. Simply create a data slice on 0FISCPER 001.2006-003.2006 and you're done. Everything that falls under a data slice can only be displayed but not changed by BPs functionality.
P.S.: Next time you should use the BPS forum for this kind of question.
Best regards
Dirk

How to update a custom list when there is a changes in excel sheet uploaded in document library

I have created a document library in which m uploading a excel sheet with values in it and i have created a custom list with same no.of.rows and columns in the excel sheet given the same name of columns. Now i have to make sure that whatever changes i do
in the excel sheet should automatically gets updated in custom list in sharepoint

You'll need to create an event receiver for when you add/update a document on the source library (http://msdn.microsoft.com/en-us/library/office/gg749858(v=office.14).aspx)
Then, with code open the excel file and count the rows. You can use the OpenXmlSDK to do that (http://www.microsoft.com/en-us/download/details.aspx?id=5124)
Good luck ;)

Colored Cells in Excel sheet

hi
we have a excel sheet with values which we created based on a tutorial spreadsheet. We tried the exactly the same steps provided in the PDF but it did not work. however when we used the original file we got the same output that was shown in the PDF screenshot. Here is what we tried.
we created a spreadsheet similar to the one given below
City     JAN     FEB     MAR     APR     MAY     JUN     JUL     AUG     SEP     OCT     NOV     DEC     Low     High
ABILENE, TX     44     49     56     65     73     80     84     83     76     66     54     45     44     84
AMARILLO, TX     36     41     48     56     65     74     78     76     69     58     45     37     36     78
AUSTIN/BERGSTROM, TX     48     53     60     67     75     80     83     82     78     69     58     50     48     83
In the canvas we placed a spreadsheet table control which contained the city names , a line chart and 2 gauges for HIGH and LOW values.
Now the problem we faced was when we click on the city name in the table control nothing changed in the chart even though it was mapped to the correct cells.
In the original file that came with the PDF there were YELLOW and RED blank cells to which it asked to map but those cells didnot contain any hidden data also. We would like to know is there any significance of those colored cells. whenever we download some sample excel file from the internet for a dashboard creation it has some colored cells, we would like to know does those cells contain any hidden info to make the dashboard work.
Thanks
GURU

Most of the times, colored cells are used by the dashboard's designer to represent cells that are used at run time as origin/destination cells. This means that although at design time they are empty (they indeed are - there is no "hidden" data there), they contain data when the dashboard is executed.
Some suggestions:
- Check the component's properties to see which cells it uses.
- Also, when in Preview, go to File -> Snapshot -> Current Excel Data to see what the Excel file actually looks like at run time. There you should see data in the colored cells.
HTH,
JK

Heading line in excel sheet.

Hi Experts,
           I am working in R/3 4.7 system. I am populating an excel sheet with values from an internal table. Now I want to include a row for heading in the beginning of the excel
sheet. In ECC 6.0 there is a parameter in GUI_DOWNLOAD for heading. But it is not available
in 4.7 system. How should i proceed?
Thanks in advance.

Hi,
Refer Below code
*&      Form down_desktop_file
      text
--> p1        text
<-- p2        text
FORM down_desktop_file .
*--Local Variables
DATA : l_file   TYPE string.
SELECT * FROM zsd_ra
      INTO TABLE it_sd_ra.
*-- for Heading in excel sheet
st_head-name = text-031.
APPEND st_head TO it_head.
st_head-name = text-032.
APPEND st_head TO it_head.
st_head-name = text-033.
APPEND st_head TO it_head.
st_head-name = text-034.
APPEND st_head TO it_head.
st_head-name = text-035.
APPEND st_head TO it_head.
st_head-name = text-036.
APPEND st_head TO it_head.
st_head-name = text-037.
APPEND st_head TO it_head.
st_head-name = text-038.
APPEND st_head TO it_head.
LOOP AT it_sd_ra INTO st_ra1.
    st_data-gjahr               = st_ra1-gjahr.
    MOVE st_ra1-monat TO st_data-monat.
    st_data-zzprojectid         = st_ra1-zzprojectid.
    st_data-zwbs                = st_ra1-zwbs.
    st_data-zeac_amount         = st_ra1-zeac_amount.
    st_data-zlabor             = st_ra1-zlabor.
    st_data-zmaterial           = st_ra1-zmaterial.
    st_data-zohead              = st_ra1-zohead.
    APPEND st_data TO it_data.
    CLEAR: st_ra1,
           st_data.
ENDLOOP.
Down load TAB delimited file
l_file = p_filep.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      filename                = l_file
      filetype                = 'ASC'
      write_field_separator   = c_chk
    TABLES
      data_tab                = it_data
      fieldnames              = it_head
    EXCEPTIONS
      file_write_error        = 1
      no_batch                = 2
      gui_refuse_filetransfer = 3
      invalid_type            = 4
      no_authority            = 5
      unknown_error           = 6
      header_not_allowed      = 7
      separator_not_allowed   = 8
      filesize_not_allowed    = 9
      header_too_long         = 10
      dp_error_create         = 11
      dp_error_send           = 12
      dp_error_write          = 13
      unknown_dp_error        = 14
      access_denied           = 15
      dp_out_of_memory        = 16
      disk_full               = 17
      dp_timeout              = 18
      file_not_found          = 19
      dataprovider_exception = 20
      control_flush_error     = 21
      OTHERS                  = 22.
IF sy-subrc <> 0.
    MESSAGE i368(00) WITH 'Error writing file'(m03) l_file.
ELSE.
    WRITE:/ 'file downloaded', l_file.
ENDIF.
ENDFORM.                    " down_desktop_file
Regards,
Prashant

Installing Control Panel 2/3 causes problems in opening Excel sheets

After installing the control panel 3.0, I can't open Excel sheets properly anymore. A message says that the Excel sheet contains corrupted data and Excel can try to restore them. After confirming this, the excel sheet shows opened but all formating is gone.
I had this issue yet with Control Panel 2.0. After some research on the web I found out that the problem is caused by the CP for Windows. I then switched back to CP V 1.1.4 and the excel sheets opened properly again.
Thanks for any advise. I'm using Windows 7 and Excel/Outlook 2007.

You are downloading software illegally. ShapeShifter is shareware so unless you indicate that you paid for it I don't feel it is appropriate to post your issue in this forum setting.

Regarding Excel Sheet

Thanks for the immediate response for my queries. The answers are very useful.
As per our requirement, I need to display excel sheet with values on the front panel itself so that customer can view the values there itself.
How can i do this in LabView?
Thanks in Advance
Regards
Malleswari

Are you trying to save the data in excel and display that excel sheet?
If yes, you can do that using Report generation toolkit.

Unable to display double values in Excel sheet using JExcel API

Hi
I am writing code to generate report in the form of Excel Sheet using JExcel API.
Everything is going fine but whenever I want to put some double values in a cell it is only showing 2 decimal places. My problem is "I want to show upto five decimal places".
Any kind of reply might help me lot.
Thank U.

If you enable the submit zero option, it still happens? This is a new feature on the display tabl
#NumericZero Enhancements
To display a numeric zero in place of an error message, you can enter #NumericZero in any of the three Replacement text fields. When you use the #NumericZero option:
· Excel formatting for the cell is retained.
· All calculations with dependency on the cell will compute correctly and will take the value of this cell as zero.
· This numeric zero is for display only. When you submit, the zero value is NOT submitted back to the data source.
You cannot set display strings for cells that contain an invalid member or dimension name (metadata error). Metadata errors produce standard descriptive error messages.
Errors are prioritized in the following order from highest to lowest. The error message for a higher-priority error takes precedence over that for a lower-priority error.
1. (Highest) Metadata errors
2. #No access
3. #Invalid/Meaningless
4. #No data\Missing

How do I search for a value in an Excel sheet using ActixeX

I am already accessing my excel sheets however I need to be able to search the sheet for a certain value and return the row/cell location. Is there an activeX control that can do this?

You will need a reference to the range to search. This can be the entire sheet if you wish. Just wire that to the method node Find. Here you can specify all of the typical search options. Wire your string or number into the What input. For the what to LOOKAT value, use -4163 for Value and -4123 for formulas.
The reference returned is the range of the found value. You can wire it into the property node Row and Column to get the location.
Michael Munroe
www.abcdef.biz
Michael Munroe, ABCDEF
Certified LabVIEW Developer, MCP
Find and fix bad VI Properties with Property Inspector

Y-axis Does not show values when exported to excel

Hi,
We are facing trouble while showing Y-axis values when report is exported to excel. On report Y-axis is shown properly however when we export it to excel only 1 value is shown with arrow mark(=>).
If we will right click Y axis, we can see all data exported in "Select Data". If we select Y-axis, and change axis properties to automatic, we can see Y-axis values on excel.
Now, is there any property setting which will show all the data on Y-axis instead of showing up single value with arrow?

Thanks for your reply. I tried it closing all sheets and exporting, however result doesn't change. There is an aggregate table we are querying to which holds almost 20k records. Right now I have observed this with 3 reports. In one of the report I am using Horizontal chart. In that report there is issue with X-axis.
e.g.
Band
1000<= |
             |
             |________________________________
              A                     B                  C                D

How to export the value t.code me2s to an excel sheet ?

HI ,
THIS IS sandipan. I am very new in this field . My requirement is when i am going me2s . then i am giving purchasing group , plant , Service Number as input. then it showing purchase doc . , item , porg , matl... , plant , crcy . It's ok. but after that when i am click purchase order it displays Purchase order for external services : overview screen . I need to export this screen value to an excel sheet. There is a option system .....>list .......> save ..........>local file. but it is in inactive mode.
how Is it possible ? please answer me...
Edited by: sandipan.sap on Feb 10, 2012 3:29 PM

Hi
U have to use Jxl jar files(As suggested by previous reply ) in External DC Project, then only u will able to work with data and property of excel files.
Further ,take the help from following threads
1.[Download Data to an excel sheet, with colours|Re: Download Data to an excel sheet, with colours;
2.[Color cells in excel file|Re: Color cells in excel file;
3.[Changing properties of only few selected cells in MS excel..??|Re: Changing properties of only few selected cells in MS excel..??;
Best Regards
Satish Kumar

Excel download into a sheet-2by taking formula from another sheet.-1

i hv an internal table itab.which contain 3 fields a,b,c.
a,b are input parameters (int).c = ab.Now i hv to download the values of a,b,c into a excel sheet-2 by <b>taking the formula</b>(c = ab) <b>from another sheet-1</b>.and everytime the new vales of a,b,c should be appended ito the sheet2.
can anybody tell me which fm i shoud use?? or some sample code will be grrr88.
points will be rewarded.

See if these blogs can help you ...
/people/rich.heilman2/blog/2005/09/12/manipulate-excel-with-ole-abap
/people/sap.user72/blog/2006/02/07/downloading-data-into-excel-with-format-options
Not sure if you can do the calculations.
Regards,
Ravi

Formula in Excel Sheet shows #VALUE!.

Similar Messages

Maybe you are looking for