Formula that adds 1 to the prior field over and over again

I have a form that requires me to input numbers into the form fields. There are over 700 numbers that need to be inputted into separate fields. The numbers are sequential so if I input “1” in the first field, is there a JavaScript that I can use for the other 699 fields that will add one to the prior field?

Sure, but if the fields are named in a consistent manner, there's a very simple way of doing it using a loop.
Let's say the fields are named Field1 to Field700. Field1 is the editable field, and the rest should be calculated.
You can add this code as the custom validation code of Field1:
for (var i=2; i<=700; i++) {
this.getField("Field"+i).value = event.value ? (1*event.value)+(i-1) : "";

Similar Messages

I have a numbers spreadsheet for tracking company data. I want to copy the format of the spreadsheet (rows, columns,and formulas) but have all of the data fields be blank for the new year. How do I do that?

I have a numbers spreadsheet for tracking company data. I want to copy the format of the spreadsheet (rows, columns,and formulas) but have all of the data fields be blank for the new year. How do I do that?

click and hold on one cell, then drag to select the range, then release, then type the delete key. Only inlude cells in the range you do not want to keey the contents of the cell. You can remove one-off cells by holding the command key and clicking cells to add or remove as needed.
You can download the Numbers users guide here:
http://support.apple.com/manuals/#productivitysoftware

HR - have to add description for the customised field in infotype 4118.

I need to add description for the customised field in info type 4118 in HR module.

hi,
for HR infotype go to tansaction PM01 .
OPEN YOUR INFOTYPE . ADD YOUR COSTOMIZING FIELD .
also see these links
http://www.sapdevelopment.co.uk/hr/hrhome.htm
See:
http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
sites regarding hr-abap:
http://www.sapdevelopment.co.uk/hr/hrhome.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPA/PAPA.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPD/PAPD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PYINT/PYINT_BASICS.pdf
http://www.atomhr.com/training/Technical_Topics_in_HR.htm
http://www.planetsap.com/hr_abap_main_page.htm
You can see some Standard Program examples in this one ...
http://www.sapdevelopment.co.uk/programs/programshr.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?Offer=SAlgwn12604#Certification
http://www.erpgenie.com/faq/hr.htm.
http://www.planetsap.com/hr_abap_main_page.htm
http://www.sapbrain.com/TUTORIALS/FUNCTIONAL/HR_tutorial.html
These are the FAQ's that might helps you as well.
http://www.sap-img.com/human/hr-faq.htm
http://www.sapgenie.com/faq/hr.htm
http://www.planetsap.com/hr_abap_main_page.htm
http://www.atomhr.com/library_full.htm
HR Long texts Upload
Look at the below link
BDC - hr maintain text
HR
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPA/PAPA.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPD/PAPD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PYINT/PYINT_BASICS.pdf
http://www.atomhr.com/training/Technical_Topics_in_HR.htm
http://www.planetsap.com/hr_abap_main_page.htm
you can see some Standard Program examples in this one..
http://www.sapdevelopment.co.uk/programs/programshr.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?Offer=SAlgwn12604#Certification
These are the FAQ's that might helps you
http://www.sap-img.com/human/hr-faq.htm
http://www.sapgenie.com/faq/hr.htm
http://www.erpgenie.com/faq/hr.htm.
www.sap-img.com
http://www.planetsap.com/hr_abap_main_page.htm
http://www.sapbrain.com/TUTORIALS/FUNCTIONAL/HR_tutorial.html
http://www.sapfans.com/forums/viewtopic.php?p=498530&sid=d7ec5866e3fb26880da129de45ce79de
http://www.sapcookbook.com/preview_hr_questions.htm
http://www.atomhr.com/library_full.htm
http://www.sapdevelopment.co.uk/hr/hrhome.htm
http://www.planetsap.com/hr_abap_main_page.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci983590,00.html
http://www.allsaplinks.com/HRmaterial.html
http://www.allsaplinks.com/timemanagement.html
http://www.allsaplinks.com/payrollcompletefunctional.html
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/HRINF/HRINF.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PYXXFORM/PYINT_FORMBUILDER.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMPA/BCBMTWFMPA.pdfhttp://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_HR.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPA/PAPA.pdf
Re: New to ABAP HR Programming
http://www.planetsap.com/hr_abap_main_page.htm
Reward points if useful.
REGARDS ,
PANKAJ

I can not use the tab key to move to the next field or use the shift and tab to move to the prior field in forms.

After updating to 7.0.1 I can not always use the tab key to move to the next field or use the shift and tab to move to the prior field in forms. This always worked in previous versions and it's much needed for my type of work. Does anyone know of a setting to activate this? If not can the Firefox developers work on this issue (please). I love Firefox but desperately need this feature to work correctly. Thanks!

I tried in safe mode and the tab key worked just fine. I'm not sure about all web forms I've only recently updated to 7.0. The wen form I was using was for appraisal purposes and it has multiple data fields to fill in and also drop down menus to select from. Might I always have to use Firefox in safe mode to be able to utilize the tab between field feature? Thanks for your help!

The new field blur and tilt shift filters have stopped working

The new field blur and and tilt shift filters worked a few times but are now greyed out in the menus. Any ideas why? Thanks.

Did you check the settings Chris mentioned? Your issue sounds like there might be a video card or driver issue, which can disable the GPU related features and give you a lesser version of the blur filters. See this link for some troubleshooting suggestions. See if issues with the video card have disabled - Edit>preferences>performance use graphics processor. Also check the advanced settings drawing modes. Be sure you have the current driver (system is updated and current on mac or go to the video manufacturer's website for pc) . That is often the cure.
You might want to copy your system information (photoshop help>system info) here for us to look at.
Pattie

Cocatenate the two fields ERDAT and ERZET in one field

Hello Friends, Please suggest how to Cocatenate the two fields ERDAT and ERZET in one field . in my ZTABLE.ERDAT IS DATE 8 and ERZET tims 6
so what should be the new ZCOMBO field length and type
Please give the ABAP Code to write that in Exit to Populate this Cocatenation of these two fields.
Thanks
Sincerely
Soniya Kapoor

Hi Soniya,
Declare the field as Timestamp and use Convert To timestamp statement for Concatenating Date and Time into a single field
CONVERT for Timestamps
Converts a timestamp into the correct date and time for the current time zone.
Syntax
CONVERT TIME STAMP <tst> TIME ZONE <tz> INTO DATE <d> TIME <t>.
CONVERT DATE <d> TIME <t> INTO TIME STAMP <tst> TIME ZONE <tz>.
As long as <tst> has type P(8) or P(11) with 7 decimal placed, and <tz> has type C(6), the time stamp <tst> will be converted to the correct date <d> and time <t> for the time zone <tz>.
Regards,
Abhishek

How to create a map that is larger than the game in width and height?

hi,
i wounder how i can create a map(not the design) that is larger than the game in width and height, part of it will appear in the main page and anther part you can move to it after you press the arrow symbol, but the map is just one image so i want put it in line and out line the game page, and the out line part includes buttons and symbols the player can use, but it will be in line and the other part will be out line when you press the left arrow or the down arrow, how i can do that?
and is that possible to animate it so when the player press the arrow, will give it action to start the animation in one sec, i know how to animate it if that possible but i don't know which code i will use for the mouse click with the arrow symbol, and how to use the same code in the same symbol to start anther animation depending on which part of the map is on?

I don't know a lot about mask and masked layers and how to work with the normal layers beside i will use some 3D graphics but not in the background, i will explain all this to you to be more clearly.
first i am using action script 3.0
close ex,
you have 2d map"image" 900*300 pixel.
this image contains some 2d symbols when you click will go to anther normal map (anther normal layer) so they must appear.
your game 320*320 px, and the place the map will show on 300*300, and there's basics objects will be in most pages including the page that show the map so i don't know a lot about how this will work with mask layers.
so you can only see the left side of the map image and what it contains, while there's two arrows one to the left and one to the right there's three cases here,
first when it show the left side(start from x:0 to x:300), the left arrow will not active when you press and the right arrow will start an animation that make the map image move to the mid side in one sec when you press.
in mid side (start from x:301 to x:600) the same left arrow will active when you press to send you back to the left side while the same right arrow will be active to send you not to the mid side but to the right side,
when moved to the right side the same left arrow will be active to send you to the mid and the right will not active when you press and depending on that,
first how to make the large image appear with the three sides in the same place without effecting the other objects "like disappearing them" ?
and the codes i need in the same left or right arrow symbol to make different actions with the same symbol when clicked depending on which part of the map is on.

I bought a new iphone and as i was setting my apple ID account and i signed in to my account and confirmed two useres with diffrent numbers that were signed to the same apple ID and it messed up my i messege and face time. how do i fix that ?

i bought a new iphone and as i was setting my apple ID account and i signed in to my account and confirmed two useres with diffrent numbers that were signed to the same apple ID and it messed up my i messege and face time. how do i fix that or delete one user ?

Hello sapiii96,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
To sign out of your Apple ID
Go to Settings > FaceTime, tap your Apple ID, and select Sign Out.
Go to Settings > Messages > Send & Receive, tap your Apple ID, and select Sign Out.
Best of luck,
Mario

In iMovie 11, how can you cut/paste a clip that has subtitles and actually have the subtitles get cut/pasted. When I try, the subtitles disappear into the void and I have to do the subtitling all over again.

In iMovie 11, how can you cut/paste a clip that has subtitles and actually have the subtitles get cut/pasted. When I try, the subtitles disappear into the void and I have to do the subtitling all over again.

If you think this is a bug, you can report it here:
Apple - Mac OS X - Feedback

On iTunes while downloading a movie it say error please check that the connection to the network is active and try again what does this mean i have an internet connection !!!

Help
I dont understand when i download a movie or tv series on my mac book air i get this error message after buying it! its iTunes while downloading a movie it say error please check that the connection to the network is active and try again what does this mean i have an internet connection !!!

Hello.
Certain types of software can affect the way a computer sends and receives information from the Internet. This article may help you resolve the issue:
Information about error -50 and downloading videos
http://support.apple.com/kb/TS1583
If it did not work, contact iTunes Store via (http://www.apple.com/support/itunes/store/) and/or Apple Tech Support via 1-800-275-2273.

My mac book pro crashed and the logic board died. They said that i could get the hard drive out and it should have all my files on it. How do i get them off and put them on my new computer?

My mac book pro crashed and the logic board died. They said that i could get the hard drive out and it should have all my files on it. How do i get them off and put them on my new computer?

Mj
Do you mean a case for the external hard drive? See here. Hope this may be helpful to you.
Regards,
Joseph

I have a brand new macbook pro that i was doing a data transfer from an old macbook, it got stopped/cable pulled out, now have spinning wheel of death that wont stop, how do i reboot/stop the wheel of death and start again?

i have a brand new macbook pro that i was doing a data transfer via firewire from an old macbook, it got stopped/cable pulled out, now have spinning wheel of death that wont stop, how do i reboot/stop the wheel of death and start again? (this time il use time machine transfer)

Just power off the machine(s). Shut them down. Migration Assistant gets 'stuck' sometimes - best way to migrate really isn't over Firewire, though it will certainly work, but with both machines hardwired via Ethernet to the same router. You can use a TM backup, too, of course, provided that it's recent. Which is the best? Your choice. I've done it both ways and have a preference for MA, but TM restore can be a bit faster and less quarrelsome.
Clinton

What do i do after downloading iOS 3.1 software and "There was a problem downloading iOS 3.1.1 software update for ipod touch. an unknown error occurred (8288). Please check that the connection to the network is active and try again." comes up?

what do i do after downloading iOS 3.1 software and "There was a problem downloading iOS 3.1.1 software update for ipod touch. an unknown error occurred (8288). Please check that the connection to the network is active and try again." comes up?

Hello, I hope by now you have resolved the upgrade issue, but if not, here is what I ended up having to do:
“SUCCESS!!! I took my iPod to a friend who is a computer programmer/genius. He turned off his wireless, hooked the ethernet cable directly into his computer, and the download went through without a hitch. YAY!”
Here is my original post explaining what I had already tried:
“Hi all,
I got an iPod Touch 1st gen for my youngest son for Christmas as a starter. It has the 2.1.2 ios on it, but after I paid for the upgrade to 3.1.1, I keep getting an error message (8288) saying there was a problem with the network connection. I have called customer service, and they suggested I try on a different computer, and if that didn't work, try connecting to a different network, and then trying the update. None of this has worked. It seems that tech support is clueless with this issue.
I have installed and unistalled iTunes 10.5, 10.3, 10.4, and now I am back with 10.5. I have tried looking up the issue from several search engines but no one seems to have a universal solution and I have tried several.
I really want to have this thing updated for himw hwne he opens it, but I am starting to worry that my purchase was a bust. I know this is the oldest version, but I don't want to buy a newer, more expensive iPod and him still not be mature enough to really take care of it. As I said, this one is a starter.
Can anyone help? Please?!
Thank you!!!
P.S. We have a PC, with Windows XP Home.”
Now, there seem to be a lot of different ways to solve the 8288 error, none of which are universal. Best of luck getting yours upgraded!
Tiffany
P.S. The post by Sparkhi is a link to his blog going into a long story about how he wanted Apple to pay him for “solving” the issue….the one that apparently has been solved by multiple solutions. I’m not trying to bash, it just bothers me that he put up this whole story and finally, at the very end of his blog post, posts his solution.

What do I have to do in creating a Keynote presentation on my MAC so that when I send it to my iPad, I don't have to re-do the presentation all over again as the fonts have changed, sizing has changed and everything is basically a mess?

What do I have to do in creating a Keynote presentation on my MAC so that when I send it to my iPad, I don't have to re-do the presentation all over again as the fonts have changed, sizing has changed and everything is basically a mess?
I have downloaded many of my previous Keynote presentation into my new ipad mini and not ONE has opened properly
Rather defeats the purpose of icloud, synching, Keynote on IOS etc doesn't it?
Any tips anyone?
Cheers
Philip

Thanks for this Gary. Much appreciated. Will help with future ones.
Still a bit like using keynote in 'safe mode' and very limiting.
If anyone produces an 'auto convert' app that will save me the work of fixing existing presentations slide by slide, I'm buying it :-)
Thanks again

New to the Apple and I want to set up a user account that will not delete the guest users files and allow and preserve their personal settings after log out. Is this possible?

New to the Apple and I want to set up a user account that will not delete the guest users files and allow and preserve their personal settings after log out. Is this possible?

The built-in guest user account will not do this. Simply create a new standard account and call it "Guest" or "Guest Users" or whatever you like.
Go to System Preferences > Users& Groups, click "+" to make a new account.

Formula that adds 1 to the prior field over and over again

Similar Messages

Maybe you are looking for