Formulas in Update rule active Program

Hi,
I would like to know whether is it possible to see the formulas applied in the update rule active program generated .
for exampkle: (IF TRANINDIC = 0, NET_VALUE,0).....This formula has been applied for a specific kefigure in update rule.
I just wanted to see the above formula in the update rule activer progrma...so is it possible to see....if it is possible please let me know some tips and tricks to check the same.
Thanks
Sujan

Hi,
In rsa1 open upadate rules. and in the main menu. check for option generated program under menu options.
you can get the program.

Similar Messages

ODS update rule activation

Hi,
Can some help me out for ODS (0SD_O03) update rules activation,I am not finding any thread related to this issue.
Please donot suggest for RSAU_UPDR_REACTIVATE_ALL prg.It is for only Infocube update rules activation
Thanks,
Praveen

Hi Praveen,
RSAU_UPDR_REACTIVATE_ALL program is not only for InfoCubes update rules activation. You can activate any update rule through this program.
In program
S_UPDID give updaterule technical name such as(CONA85AOASV0HQ3B8I6E2EBJM)
S_TARGET give 0SD_O03
S_SOURCE give infosource name

Formula in Update rule(Urgent)

Dear Gurus,
Iam written Formula in update rule
Get source system type is SUBSTRING( Source System, 2, 1 )
And Get Client Formula is RIGHT( Source System, 3 )
Above formula syntax is correct.
But when iam loading data getting below error.
Formula in InfoObject /BIC/CLIENT : The argument 'R3DCLNT240' cannot be interpreted as.
In Help node it is showing below message.
This is a specific error message of processing from the handling of incorrect data data records. It enables the jump into the error requests or the PSA maintenance, depending on whether the generation of an error request was desired, and whether or not it was possible.
How to solve this problem?What does it mean?
Thanks in advance
Ramu

Hi Ramu,
Instead of using Formula why don't u try with Constant in Update rules for R3DCLNT240.
Try with this and hope it may works.
Thanks & Regards,
Reddy.

RSAU466 : Update rule Activation error

Hello Guys,
We upgrated BW3.5 to BI7.0 SP13
We're facing problem on Update Rule activation
the message is an RSAU466, I have locked for solution on service sap, they suggering to run SP13, but we're already on SP13
Any one have an idea ?

I recreated the update rule

Update rules Activation Problem

Hi,
Iam getting the error while transporting the update rules to production,saying error mesage,
Start of the after-import method for object type R3TR UPDR (Activation Mode)
Update rules 4AR6MO7P6M428KB2RPA65E9EX read in version M
Error when activating update rule 4AR6MO7P6M428KB2RPA65E9EX
Activation of the update rules for ZCG_O15 ZBW_CRTDN
IC=ZCG_O15 IS=ZBW_CRTDN error when checking the update rules.
from Dev to QA successfully transported and data hasbeen loaded with out any issues,
I didnot changed any thing in ODS,I Just created the new infosource with only two characteristics and created the update rules direct updating,with out any routines.
I activated the update rules in Dev couple of times and transported to PD,but every time it is giving same error,there was no issues upto QA,
Please suggest anybody how to resolve this issue.
Thanks
BI USER

Hi
Thanks for your replies,
Iam checking from transport request error log,iam getting error message as I mentioned in my question,
iam not getting detail information on error log,Update rules are available in PD system but in inactive state,
I did the Update rules check it is giving message 'no erreors found in update rules'.
I collected all dependent objects from transport collecter,still same error,I tried from Program
RSAU_UPDR_REACTIVATE_ALL,but my PD system is in not modifiable state.
Thanks

Updates rules activation triggers dump message type X

Hi,
In an existing update rule, I am trying to add a field (key figure=> characteristic (source)
after I activated the update rules a shot dump is triggered
"Message type X"
message class RSAA
Number 108
trigger location
%_T005N1
Module Name Instantiate
called function :
RSAU_GET_CUBE_TIME
I have already done some consistency test about the infocube in RSRV, but don't dind a clue for the moment.
any help would be grateful
John

Hi
Try to run standard program RSAU_UPDR_REACTIVATE_ALL.
Thanks
lokeshM

Update Rules Activation

Hi All,
I was told to activate Asset Accouting in BI Content. But to my ease, most of the data targets, info objects and data sources have been activated before hand. However the problem is the Update rules are not yet activated. If I try to select the Update Rules under each data target and try to install them...the system prompts a message "the delivery overwrites the selected objects. Do u want to overwrite the objects?". Can anyone please guide me how to activate just the update rules.
Thanks,
Regards,
Gautham

HI,
You can use teh program suggested by tinkugeo to activate the inactive update rules, present in the system.
Or, if you are installing from business content, the message it displays means that if you install the business content update rule(or any objetc for that matter)
and it has been installed and used earlier, and due to some reaason is inactive,
the business content installation will overwrite thoose changes and give you just the standard content.
So, if you are sure, taht there are no changes you can install the business content update rule, else use the program
and if the rule is not present in the system, and you are getting this message, its just a warning, ignore it and continue.
Hope this helps
Shilpa

Update rules - Activation error - in cube 0PAPA_C02

Hi All,
When i am activating the update rules of 0PAPA_C02 cube, i am encounting the following error for key fig "Headcount Change FTE Employee".
Empty or invalid formula 8RFPFLULBJGBAO07IDMZGMPXR.
Please let me know your thoughts.
Thanks & Regards,
Eswari.

Hi,
And also make sure that all target fields has proper maapings. i.e either a direct assignment with source field,or routine or formula or constant. Some times sytem shows a routine as update method but blank routine. It happens after,when you include a field to data target or coping the update rules.
Most of the time, you can solve this type of error by studing very carefully the existing mappings(routines,formulas).
With rgds,
Anil Kumar Sharma .P

Message RSAU466 when update rules activation

Hi everybody,
I did some corrections in an ABAP routine in update rules. When I try to activate them this message appears :
Message no. RSAU466
Diagnosis
When generating the update program for data target XXXXX, InfoSource YYYYY, a syntax error occured in row 1.980.
System response
The update rules cannot be activated.
Procedure
If the error message Incorrect logical expression. is cut off, do the following to get the complete error message:
Go into the update rule maintenance, choose Extras -> Display Activated Program and carry out a syntax check there. You can then find out what the error was.
I've tried to display the acitvated program but this message occurs : Unable to find a tool to process the request
I don't want to delete and recreate my update rules because thes are very complicated and it's very risky.
Any idea ?
Edited by: maredami on Jun 11, 2010 1:55 PM

Thanks for your help !
RSAU_UPDR_REACTIVATE_ALL doesnt work (No message exists).
I've already seen these notes but we don't want to import support packages...
I've found the generated program of the update rules (GPxxxxxxxxxxxx) and at the line 1980 that is wrote : S_COB_PRO_PLANT TYPE RSD_S_COB_PRO.
I have no idea what to do now...

Update Rules active error

Hi all:
I had add a new key infobject to an existing ODS (the ODS is empty) and then I active the ODS, all runs properly. Now I modify the update rule to fill the new added infoobject with a constant. When I try to active the update rules, the system returns RSAU206 error. No routine has been created for InfoObject & (data field: &) but the infoobject hasn´t routine. Can anyone help me?
Thanks in advance
Abel

HI Diego:
I just checked one by one all routines in update rules and all of them are rights. I try to display activated program ( in extras menu) and itsn´t appear. This is not the first time happend, sometimes when I add a new infoobject to an existing ODS I have problems to active the update rules. The only way taht I know is delete and make again the update rules.
Thanks

Urgent....Transported Update rules active version but still not active....

Hi Gurus,
i have changed a datasource and an ODSA
and this ODSA which also acts as a datamart to ODSB
so i have transported, transfer rules, transfer structure, infosource, update rules of ODSA and also the
update rules of ODSB as well
And before realsing the request into quality i have replicated the datasource from R/3 as well and then realsed this request to Quality everything is active like transfer rules, infosource, transfer structure
ODSA update rules
But the ODSB update rules are not active kindly tell how to make them active.
so again i have regenerated the export datasource and then again i transported only update rules of
ODSB.
but still the update rules are inactive, kindly someone guide me how to make them active
as i have to send this to production which is having 4 years of historical data so please kindly
help me.
thanks and regards
Harish

Hi A.H.P, vishvesh, anil, and buvanna
thankyou guys for your info and support i tried all that u have said
except activating them manually...as it is urgent i am going with manually activating
and vishvesh i could do check the update rules by basis help. thanks for that
A.H.P i have manually activated the update rules its working fine, so i am praying that everything should be fine in production as i have requested to have permissions to activate in prd as well
thankyou very much for all the support.
i am relieved that i have at last solved it
thanks and regards
harish

Update rules activation giving dump

Hello
I have inserted three new characteristics in already created cube and tried to activate the update rules but it started giving dump error.
To get back to original conditions, I have deleted newly inserted infoobjects but while activating update rules it is still giving dump error.
Can any one help with this issue?
there is no syntax error.

Hi abhishek,
First delete the contents of the cube , and then delete the inserted characteristic. Now, you will be able to delete the new characteristics.
Regards,
Krishna.

Update rule activation......

Hi,
I have added one of the fileds in ODS. This ODS gets data from 6 ODS.
All the update rules got deactivated.
Any reason why?
what we have to do ?
Will all the activation of all the update rules need to get transported again?
Thanks & Regards,
Jeetu

Hi,
BW don't know if/how this field should be updated from 1 or several of the 6 ODS'es. Therefore the update rules are inactive and you have to activate them AND updatethe new field if you want or set it to initial if you don't want to update it.
And yes, you should then transport this.
Kind regards
/martin

Regarding update rules activation in inventory management(2LIS_03_BF)

Hellow gurus,
i am working on inventory management with snap shot scenario for that we are using 3 business content datasources they are (2LIS_03_BX, 2LIS_03_BF, 2LIS_03_UM), now i want to activate the update rules for infosource(2LIS_03_BF) & cube, when i check the update rules it shows every thing is ok, but not activating ,please could you give me the suggestions
Regards,
Chandra.

bf setuptable filling based on posting date
give the posting date and give the name of job run
give the termination date and time
execute in background.you you can start the more jobs
depending on your data.you have bulk data you can divide the
jobs in based on posting date.
after that check the status in sm37.

Routine /Formula in update rule

Hello
I am trying to use formula function in update rule but its giving me error
scenerio here is
I tried with routine syntax wise itz correct but not working
here is the example
fill theIF 'KNART' eq 'ZP01'. internal table "MONITOR", to make
result value of the routine
RESULT = 'KNVAL'.IF 'KNART' eq 'ZP01'.
ENDIF.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line -
ENDFORM.
trying to update with knval( avleble in commication structure) only if other(KNART is eq zp01) i found sysntaxwise code is correct but its giving me shortdump at teh time of loading
any input will be great help
cheers
Praveen

Hi
I tried with this code though its syntax wise correct but again its not working
IF COMM_STRUCTURE-KNART eq 'ZP01'.
RESULT = COMM_STRUCTURE-KNVAL.
ELSE.
RETURNCODE = 1.
ENDIF.

Formulas in Update rule active Program

Similar Messages

Maybe you are looking for