Forum lists are broken
It looks like forum lists are broken, i.e. the two buttons to the left of the "Font family" drop down menu.
Numbered
lists
are broken
and
bullet
points
are broken
Can this be fixed please?
Oliver.
Hi Oliver341,
It would seem that the bullet point formatting (numbers or text bullet points) are working, however are displayed depending what device or browser your using.
This would also be a Lithium issue and not a BT Retail forum issue as the forum is operated and built by Lithium. The Mods would probably need to raise a ticket with lithium for them to have a look at this
Cheers
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved.
Similar Messages
-
Is anyone else experiencing this? The forum search works fine but none of the links work. Pretty frustrating when you end up paging back through 60+ pages of postings to find the one you want to see.
Hi JJRAY,
True the links are broken at the moment. Thanks for bringing it to our notice.We would see to it this is resolved ASAP.We appreciate your patience on this.
Regards,
Creator Team. -
Excel ActiveX invoke nodes are broken
I am using LabVIEW 2007. We are using a VI that runs on most of the PC's in our facility however on some the "invoke node" related to Excel functions don't operate. They are broken and the VIs won't run. We get errors that the "Invoke Node: contains unwired ro bad terminals". When going to select methods or properties not all of the properties are shown as seen on the functional PCs. Some of the properties are missing from the selection menus, thus making it incompatible.
Has anyone seen this problem and a solution?
Thanks
Manliff,What about separating the compiled code from the source? I recognize that this will only work in LV2010, but I expect that that will prevent the compiler from breaking activeX code that depends on a different version than the local one...
Testing this idea is on my to-do-list, but I was wondering if anyone has tried it already.
-Barrett
CLD -
HP 6310 all in one, the Print Cartridge Door Hinges are broken.
I have 2 printers HP 6310 all in one with the same problem, the Print Cartridge Door Hinges are broken.
Were can I buy the parts? is it too difficult to change them?
Is it a HP repair services in my area?
Is it any "recall" for this problem? I know same peobles with the same trouble
I thank you for your help
genyHi geny,
I understand the cartridge door latch has broken.
I will be happy to help you.
This is a older model so you might not be able to get that part replaced.
I have provided the HP Parts Surfer. It doesn't look like a replaceable part.
If you can get it to connect and tape the door shut so the printer recognizes the door is closed, you might still be able to still use the printer.
Hope this helps.
Thank you for posting on the HP Forums.
Have a wonderful day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
My laptops cooling fan and hinge are broken. if i were to get a new computer and activate photoshop
my laptops cooling fan and hinge are broken. if i were to get a new computer and activate photoshop on it, should i worry about how many times i have activated photoshop? Is there a limit to how many times i can download photoshop?
Hi Pinrose,
Welcome to Adobe Forums.
You can use the same subscription on 2 machines. If you want to use it on a 3rd machine you can deactivate
Photoshop from this machine. Please follow the below article on how to deactivate.
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
Thanks -
DCs are broken in consolidation only
Hi All
I have a Software component which is imported from an old NWDI
I the new NWDI I have a track consist of this SC + the 3 standard SCs (JEE, JTECHS and BUILDT)
I have checked-in all the components into the transport studio. And transported them all the way to assembly.
The SCs are all building perfectly in development.
l have also checked out all DCs in NWDS, all DCs are compiling as they should here also.
But, when I try to assemble the components on the server I get error messages. (The Check-assembly.log file)
Info:Starting Step Check-assembly at 2011-02-21 15:56:24.0882 +1:00
Info:Checks for software component mycorp.com,COMMON are performed now:
Fatal:Contact CBS administrator: Nonempty list of broken DCs -stopping export now
Error:list of broken DCs:
Info:Step Check-assembly ended with result 'fatal error' ,stopping execution at 2011-02-21 15:11:32.0190 +1:00
If I look into CBS BuldSpaces Information, I have this these information regarding the DCs
TRACK_C: Total DCs: 17, Broken DCs: 17, Dirty DCs 0
TRACK_D: Total DCs: 189, Broken DCs: 0, Dirty DCs 0
To me it looks like the SC from SAP is somehow not available for assembly, but when I read the log statement, It only mentions the DCs from my own SC.
The three SCs is available on the test tab, so I know that they have been assembled succesfully.
Best Regards
Søren MadsenHi Søren,
it is indeed then very strange how comes that the DCs haven't been imported in the first place (I mean the "Total DCs" column that displays 0 for the CONSolidation buildspace). You said that the import into the consolidation was succesful ("import finished" for each SCs on Consolifation tab of the "Transport Studio of CMS") .
Can you please confirm the followings?
1 a Restore System State in CONS, and a new import of all the SCs brings no solution, but still 0 is displayed in CBS webui, however CMS states that import finished succesfully in case of each SC imports.
2 deleting the CONS buildspace, (you can do it in the main "Buildspace" view of CBS webui), resaving the track (this will recreate _C) and proceeding as described in point 1 brings no solution. Please delete only _C.
3 As you know an import stands of "a) DTR Repository import, b) CBS-Make and c) Deployment". If you go to the "History" of the Consolidation tab (in CMS), you list the imports took place in the past, and you click on a finished import, and press the "Details..." button, you can confirm that all of these 3 steps were really succesful as per the logs and traces. Do the same for each SC.
You also stated that after you faced this phenomenon, you tried a restore system state in DEV, and tried a new import and it was succesful. Can you please check the History, and via that all the Log Details (as mentioned above) of all the imported SCs ? Were the imports really succesful ? Can you try again a Restore System State in DEV and a reimport after you resave the track ? Are the SC still not displayed on the CONS tab after a succesful import on the Development tab ?
I hope this helps.
Thank you!
Best Regards,
Ervin -
Nonempty list of broken DCs error when we assemble using CBS
Hi
We created DC and we are going to assemble using CBS.
When we assemble, we got below error.
Info:Starting Step Check-assembly at 2005-03-15T10:13:57.0250-8:00
Fatal:Contact CBS administrator: Nonempty list of broken DCs -stopping export now
Error:list of broken DCs:
Error:lapha.net,nw04/tec/tax/calc_01
Error:lapha.net,nw04/tech/tax
Info:Step Check-assembly ended with result 'fatal error' ,stopping execution at 2005-03-15T10:13:58.0500-8:00
Any idea ?
Regards, Arnold.Hello,
"broken DC" means that the build failed for this development component.This for example happens if a used component was changed in an incompatible way. It also happens if the DC itself contains errors and the developer used the "activate even if build fails"
option in NWDS.
If you view the buildspace of your system in CBS you will see which DCs are actually broken. And you can also see the build logs there.
The CMS prevents you from assembling a software component that contains broken DCs.
Hope this helps
Regards,
Wolfram -
How is possible to appear in the top users forum list
hi
i like to known how and who appear in THE TOP FORUM LIST.
The total posts send to forum is the condition?
Regards and Thanks a lotHi
If I understand your post correctly then launch WorkGroup Manager and select Preferences from the WorkGroup Manager Menu. Enable the Show "All Records" tab and inspector option and click OK. In the Users/Groups/Computer tab you should now see the addition of another icon - it looks like a bullseye. Select this and under the filter field selecting 'AccessControls' will show you a long list. Scroll down and select Users. Now go back to the Users tab and you should see all users visible and invisible. You’ll see the same thing for Groups.
You will see different Users and Groups depending which directory node you are in. In the LDAP node you should only see Directory and System Administrator as well as VPN MPPE Key Access User in addition to any user you have created within that node. In the local Net Info node you should see users such as Amavisd User, Clamav User, Cyrus IMAP User etc. You’ll also see UIDs and GUIDs amongst a wealth of other information if you select a user or group and select the Inspector tab.
You can modify record attribute and values as well as adding your own. You can even use WGM in the same way you would use Net Info Manager locally if you wish.
Tony -
WCEM Used DCs are broken in the Track.
WCEM 2.0 standard DCs are broken in my track. May I know if any one can give me the Dependencies list that are required for the SC in SLD and CMS?
Hi Suhaas
You will need to import the following SCAs into your track:
ENGFACADE
ENGINEAPI
FRAMEWORK
J2EEFRMW
MDMJAVAAPI
SAPBUILDT
SAPWEC
SAPWECFRW
Also, as part of the track definition, you need to ensure that SAPWEC and SAPWECFRW are included as developed components (and they must not be excluded from deployment).
The development guide defines the procedure for creating a WCEM development track quite well, so this would be worth a look to ensure that nothing was missed during track setup.
Best regards,
Matt -
On my drop down menus, the items listed are appearing twice.
On my drop down menus, the items listed are appearing twice. For instance, there are two "shut down" and two "restart." How do I fix this?
Hi Peter, and a warm welcome to the forums!
See Tom Gewecke's post here...
http://discussions.apple.com/thread.jspa?messageID=4395251�
This problem has been reported serveral times. It seems to be a loss of access to the main system font. I've not heard of any cure except a reinstall.
It appears to be time for a relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings. -
I deleted all my playlists provided. However, they are still on my Ipod Touch. Now, when I sync my Ipod with Itunes then the lists are copied back into Itunes?
A playlist takes up almost no room. A few kB at most.
It is simply a list of songs in the library
Do you want the playlists or not?
Now, when I sync my Ipod with Itunes then the lists are copied backinto iTunes?
Do you want them copied back into iTunes? -
Values in "vendor batch" in the Goods-in-order and Goods-in-plan lists are
Vendor batch No. : Transaction ZJPMPU322
(Background)
There are "vendor batch" and "batch" fields in Goods-in-order and Goods-in-plan lists (transaction ZJPMPU322). Values for these fields are retrieved from inbound delivery document (transaction VL33N). After core 7.0 upgrade, "vendor batch" is not copied from "batch" in inbound delivery document any more so that nothing appears in the vendor batch field in the lists.
(Change request)
Values in "vendor batch" in the Goods-in-order and Goods-in-plan lists are retrieved from "batch" in inbound delivery document ONLY IF "vendor batch" is blank in the inbound delivery document.
(Current design)
Batch is retrieved from LIPS-CHARG
Vendor batch is retrieved from LIPS-LICHN
(If there is no record in LIPS, blank will be printed out for both fields)
(After change)
Batch is retrieved from LIPS-CHARG
Vendor batch is retrieved from LIPS-LICHN only if LIPS-LICHN is not blank.
If LIPS-LICHN is blank, vendor batch is retrieved from LIPS-CHARG.
(If there is no record in LIPS, blank will be printed out for both fields. If both LIPS-CHARG and LIPS-LICHN are blank, blank will be printed out for both fields),
Following is the program:
REPORT zjpmrpu322 MESSAGE-ID zjpm001
NO STANDARD PAGE HEADING
LINE-COUNT 50
LINE-SIZE 255.
*& Development ID: PU_DD_322_LJP *
*& Report : ZJPMRPU322 *
*& The Purpose of this program is to print the Goods-in-order list *
*& and the Goods in plan list for raw materials, materials purchase *
*& etc at the Sasayama plant, Japan. *
*& Change Log: *
*& Init Who Date Text *
*& PV P V R S Varma 07-May-2003 Initial Version *
*& DU D.Usui 2004/02/26 CR No. 1432 *
*& DU D.Usui 2004/03/08 CR No. 1447 *
*& DU D.Usui 2004/05/06 CR No. 1591 *
Constants
CONSTANTS:
c_werks LIKE ekpo-werks VALUE 'JP01', "Plant code - Sasayama plant
c_id LIKE thead-tdid VALUE 'F02', "Text ID for Info record
c_object LIKE thead-tdobject VALUE 'EKPO',"Object of text for info rec
*c_zzjp_r1 LIKE marc-zzjp_re1 VALUE 'GMP', "Goods in plan- Domestic
*c_zzjp_r2 LIKE marc-zzjp_re1 VALUE 'GMPI', "Import sales order document
c_plus TYPE c VALUE '', "Holding '' sign
c_spras LIKE makt-spras VALUE 'J', "Language key Japan
*c_device(7) type c value 'PRINTER', "Device type
c_form(16) TYPE c VALUE 'ZJPMPU305', "Form name
c_ele_gmp(4) TYPE c VALUE 'GMP', "GMP Text element
c_ele_gmpi(4) TYPE c VALUE 'GMPI', "GMPI Text element
add begin CR1432
c_ele_bgmp(4) TYPE c VALUE 'BGMP', "BGMP
c_ele_bgmpi(5) TYPE c VALUE 'BGMPI', "BGMPI
add end CR1432
c_function(3) TYPE c VALUE 'SET', "Function
c_type(4) TYPE c VALUE 'BODY', "Window area in main window
c_win_head(7) TYPE c VALUE 'HEADING', "Heading window
c_win_shead(7) TYPE c VALUE 'SUBHEAD', "sub heading window
c_win_fot1(7) TYPE c VALUE 'FOOTER1', "Footer 1 window
c_win_main(4) TYPE c VALUE 'MAIN', "Main window
c_comd(8) TYPE c VALUE 'NEW-PAGE', "New-page command
c_zar TYPE ekko-bsart VALUE 'ZAR',
c_x TYPE c VALUE 'X', "Indicator for print options
c_f TYPE c VALUE 'F', "Indicator for Purchase Order
add begin CR1591
Deletion indicator in purchasing document
c_loekz(1) TYPE c VALUE 'L',
For ranges tables
c_sign_i(1) TYPE c VALUE 'I', "Sign(include)
c_op_eq(2) TYPE c VALUE 'EQ', "Option(=)
Confirmation category
c_ebtyp_ab(2) TYPE c VALUE 'AB', "Order acknowledgment
add end CR1591
c_la(2) TYPE c VALUE 'LA'. "Indicator for Inbound deliver
Database Tables
Vaiables / Internal tables *
Internal table to store PO information
Not used after CR1591
DATA: BEGIN OF t_purc OCCURS 0,
ebeln LIKE eket-ebeln, "Purchasing Document Number
ebelp LIKE eket-ebelp, "Item Number of Purchasing Document
eindt LIKE eket-eindt, "Item delivery date
menge LIKE eket-menge, "Scheduled quantity
charg LIKE eket-charg, "Batch number
matnr LIKE ekpo-matnr, "Material code
werks LIKE ekpo-werks, "Plant
meins LIKE ekpo-meins, "Unit of measure
lifnr LIKE ekko-lifnr, "Vendor number
END OF t_purc.
Internal table to store material description.
DATA: BEGIN OF t_makt OCCURS 0,
matnr LIKE makt-matnr, "Material code
maktx LIKE makt-maktx, "Material description
END OF t_makt.
Internal table for storage of final EKET data
DATA: BEGIN OF t_eket OCCURS 0,
ebeln LIKE eket-ebeln, "Purchasing Document Number
ebelp LIKE eket-ebelp, "Item Number of Purchasing Document
ebelp_ex(6) TYPE n, "Extended ebelp with length 6
eindt LIKE eket-eindt, "Item delivery date
menge LIKE eket-menge, "Scheduled quantity
dabmg LIKE ekes-dabmg, " Delivered Quantity
charg LIKE eket-charg, "Batch number
matnr LIKE ekpo-matnr, "Material code
werks LIKE ekpo-werks, "Plant
maktx LIKE makt-maktx, "Material Description-- jp check
etens LIKE ekes-etens, "Sequence Number
meins LIKE ekpo-meins, "Unit of measure
lifnr LIKE ekko-lifnr, "Vendor number
vbeln LIKE ekes-vbeln,
vbelp LIKE ekes-vbelp,
vpnam(40) TYPE c, "Vendor product name
END OF t_eket.
Internal table for extraction of data from EKES
Not used after CR1591
DATA: BEGIN OF t_ekes OCCURS 0,
ebeln LIKE ekes-ebeln, "Purchasing Document Number
ebelp LIKE ekes-ebelp, "Item Number of Purchasing Document
etens LIKE ekes-etens, "Sequence No
eindt LIKE ekes-eindt, "Item delivery date
menge LIKE ekes-menge, "Scheduled Quantity
dabmg LIKE ekes-dabmg, " delivered quantity
vbeln LIKE ekes-vbeln,
vbelp LIKE ekes-vbelp,
mark TYPE c,
END OF t_ekes.
Internal table for extraction of data from EKES
Not used after CR1591
DATA: BEGIN OF t_ekes_temp OCCURS 0,
ebeln LIKE ekes-ebeln, "Purchasing Document Number
ebelp LIKE ekes-ebelp, "Item Number of Purchasing Document
etens LIKE ekes-etens, "Sequence No
eindt LIKE ekes-eindt, "Item delivery date
menge LIKE ekes-menge, "Scheduled Quantity
END OF t_ekes_temp.
Internal table for storing data from MLGN table.
DATA: BEGIN OF t_mlgn OCCURS 0,
matnr LIKE mlgn-matnr, "material code
lhmg1 LIKE mlgn-lhmg1, "Standard pallet size
lhme1 LIKE mlgn-lhme1, "Unit of measure
lety1 LIKE mlgn-lety1, "tower
ltkze LIKE mlgn-ltkze, "Storage location
END OF t_mlgn.
Internal table for storing data from MARM table.
DATA: BEGIN OF t_marm OCCURS 0,
matnr LIKE marm-matnr, "material code
umrez LIKE marc-zzjp_cas_size, "Std package unit
meins LIKE ekpo-meins, "alternate unit
END OF t_marm.
Internal table for storing data from MARC table.
DATA: BEGIN OF t_marc OCCURS 0,
matnr LIKE marc-matnr, "Material code
zzjp_nyu_sop LIKE marc-zzjp_nyu_sop, "Product Std number
zzjp_dos_frm LIKE marc-zzjp_dos_frm, "Dosage form
zzjp_aprn LIKE marc-zzjp_aprn, "Apperance
zzjp_re1 LIKE marc-zzjp_re1, "Heading
END OF t_marc.
Internal table for storing data from lfa1 table.
DATA: BEGIN OF t_lfa1 OCCURS 0,
lifnr LIKE lfa1-lifnr, "Vendor code
name1 LIKE lfa1-name1, "Vendor name
END OF t_lfa1.
Internal table for Storing data from LIPS table.
DATA: BEGIN OF t_lips OCCURS 0,
vbeln LIKE lips-vbeln, "Delivery document no
posnr LIKE lips-posnr, "Item number for Delivery document
charg LIKE lips-charg, "Batch number
lichn LIKE lips-lichn, "Vendor Batch number
END OF t_lips.
Internal table for storing the final display data.
DATA: BEGIN OF t_display OCCURS 0,
g_checkbox type c, "check box for selection of records
ebeln LIKE ekes-ebeln, "Purchasing Document Number
ebelp LIKE ekes-ebelp, "Item Number of Purchasing Document
etens LIKE ekes-etens, "Sequence No
eindt LIKE eket-eindt, "Item delivery date
menge LIKE eket-menge, "Scheduled Quantity
vpnam(40) TYPE c, "Vendor product name
lifnr LIKE ekko-lifnr, "Vendor code
name1 LIKE lfa1-name1, "Vendor name
meins LIKE ekpo-meins, "Unit of measure
matnr LIKE ekpo-matnr, "Material Number
maktx LIKE makt-maktx, "Material Description-- jp check
charg LIKE lips-charg, "Batch number
lichn LIKE lips-lichn, "Vendor Batch number
lhmg1 LIKE mlgn-lhmg1, "standard pallet size
lhme1 LIKE mlgn-lhme1, "Unit of standard pallet
lety1 LIKE mlgn-lety1, "tower
ltkze LIKE mlgn-ltkze, "Storage location
umrez LIKE marc-zzjp_cas_size, "Std package unit
meinh LIKE ekpo-meins, "alternate unit
zzjp_nyu_sop LIKE marc-zzjp_nyu_sop, "Product Std number
zzjp_dos_frm LIKE marc-zzjp_dos_frm, "Dosage form
zzjp_aprn LIKE marc-zzjp_aprn, "Apperance
zzjp_re1 LIKE marc-zzjp_re1, "Heading
std_pac_no(13) TYPE n, "Std receipt package no
tot_std_pt(13) TYPE n, "Total no of std pallets
add begin CR1447
Add new field 'Goods-in-order','Item' for goods in plan list
vbeln like ekes-vbeln, "Goods-in-order
vbelp like ekes-vbelp, "Item
add end CR1447
END OF t_display.
Internal table for storing the final display data -Goods in order list
DATA: BEGIN OF t_display1 OCCURS 0,
ebeln LIKE ekes-ebeln, "Purchasing Document Number
ebelp LIKE ekes-ebelp, "Item Number of Purchasing Document
etens LIKE ekes-etens, "Sequence No
eindt LIKE eket-eindt, "Item delivery date
menge LIKE eket-menge, "Scheduled Quantity
vpnam(40) TYPE c, "Vendor product name
lifnr LIKE ekko-lifnr, "Vendor code
name1 LIKE lfa1-name1, "Vendor name
meins LIKE ekpo-meins, "Unit of measure
matnr LIKE ekpo-matnr, "Material Number
maktx LIKE makt-maktx, "Material Description-- jp check
charg LIKE lips-charg, "Batch number
lichn LIKE lips-lichn, "Vendor Batch number
lhmg1 LIKE mlgn-lhmg1, "standard pallet size
lhme1 LIKE mlgn-lhme1, "Unit of standard pallet
lety1 LIKE mlgn-lety1, "tower
ltkze LIKE mlgn-ltkze, "Storage location
umrez LIKE marc-zzjp_cas_size, "Std package unit
meinh LIKE ekpo-meins, "alternate unit
zzjp_nyu_sop LIKE marc-zzjp_nyu_sop, "Product Std number
zzjp_dos_frm LIKE marc-zzjp_dos_frm, "Dosage form
zzjp_aprn LIKE marc-zzjp_aprn, "Apperance
zzjp_re1 LIKE marc-zzjp_re1, "Heading
std_pac_no(13) TYPE n, "Std receipt package no
tot_std_pt(13) TYPE n, "Total no of std pallets
END OF t_display1.
Internal table for storing the final display data - Goods in plan list
DATA: BEGIN OF t_display2 OCCURS 0,
ebeln LIKE ekes-ebeln, "Purchasing Document Number
ebelp LIKE ekes-ebelp, "Item Number of Purchasing Document
etens LIKE ekes-etens, "Sequence No
eindt LIKE eket-eindt, "Item delivery date
menge LIKE eket-menge, "Scheduled Quantity
name1 LIKE lfa1-name1, "Vendor name
meins LIKE ekpo-meins, "Unit of measure
matnr LIKE ekpo-matnr, "Material Number
maktx LIKE makt-maktx, "Material Description-- jp check
charg LIKE lips-charg, "Batch number
lichn LIKE lips-lichn, "Vendor Batch number
lhmg1 LIKE mlgn-lhmg1, "standard pallet size
lety1 LIKE mlgn-lety1, "tower
ltkze LIKE mlgn-ltkze, "Storage location
tot_std_pt(13) TYPE n, "Total no of std pallets
add begin CR1447
Add new field 'Goods-in-order','Item' for goods in plan list
vbeln like ekes-vbeln, "Goods-in-order
vbelp like ekes-vbelp, "Item
add end CR1447
END OF t_display2.
add begin CR1591
RANGES: r_matnr FOR mara-matnr, "for p_matnr
r_ebeln FOR ekpo-ebeln. "for p_ebeln
add end CR1591
DATA: line TYPE i. " line number
DATA: g_checkbox TYPE c. "check box for selection of records
DATA: g_tab LIKE sy-index. "variable to hold index
DATA g_tabix LIKE sy-tabix. "holder for table index
Printing Options.
DATA: lw_pr_options LIKE itcpo.
*lw_pr_options-tddest = 'SA03'. " Print Device Name
lw_pr_options-tdpreview = 'X'. " Print Preview
lw_pr_options-tdnewid = 'X'. " New Request
lw_pr_options-tdlifetime = 2. " Retention in Spool
Selection Screen *
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME.
SELECT-OPTIONS:
s_date FOR sy-datum DEFAULT sy-datum. " Search period.
PARAMETERS:
p_matnr LIKE mara-matnr, " Material code
p_ebeln LIKE ekpo-ebeln. " Purchase Document No
SELECTION-SCREEN END OF BLOCK blk1.
Selection Screen Checks *
AT SELECTION-SCREEN.
IF ( s_date-low IS INITIAL ) AND
( p_matnr IS INITIAL ) AND
( p_ebeln IS INITIAL ).
MESSAGE e000 WITH 'Entry Must in atleast one of the Fields'(t00).
ENDIF.
IF ( NOT p_matnr IS INITIAL ) AND
( s_date IS INITIAL ) AND
( p_ebeln IS INITIAL ).
MESSAGE e000 WITH 'Date should also be Entered'(t01).
ENDIF.
del begin CR1591
This check is not found in original FS
IF ( NOT p_matnr IS INITIAL ) AND
( s_date IS INITIAL ) AND
( NOT p_ebeln IS INITIAL ).
MESSAGE e000 WITH 'Date should also be Entered'(t01).
ENDIF.
del end CR1591
Validations for Data selection *
del begin CR1591
Waste check
IF ( NOT s_date IS INITIAL ) AND
( p_matnr IS INITIAL ) AND
( p_ebeln IS INITIAL ).
PERFORM f_check_date_in_eket.
ENDIF.
IF ( NOT s_date IS INITIAL ) AND
( NOT p_matnr IS INITIAL ) AND
( p_ebeln IS INITIAL ).
PERFORM f_check_matnr_in_plant.
PERFORM f_check_matnr_in_ekpo.
PERFORM f_check_date_in_eket.
PERFORM f_check_matnr_in_plant.
PERFORM f_check_matnr_in_ekpo.
ENDIF.
IF ( NOT s_date IS INITIAL ) AND
( NOT p_matnr IS INITIAL ) AND
( NOT p_ebeln IS INITIAL ).
PERFORM f_check_matnr_in_plant.
PERFORM f_check_matnr_in_ekpo.
PERFORM f_check_date_in_eket.
PERFORM f_check_ebeln_in_ekpo.
PERFORM f_check_werks_in_ekpo.
ENDIF.
IF ( NOT p_ebeln IS INITIAL ) AND
( NOT s_date IS INITIAL ) AND
( p_matnr IS INITIAL ).
PERFORM f_check_date_in_eket.
PERFORM f_check_ebeln_in_ekpo.
PERFORM f_check_werks_in_ekpo.
ENDIF.
IF ( NOT p_ebeln IS INITIAL ) AND
( s_date IS INITIAL ) AND
( p_matnr IS INITIAL ).
PERFORM f_check_ebeln_in_ekpo.
PERFORM f_check_werks_in_ekpo.
ENDIF.
del end CR1591
Data selection from Tables *
START-OF-SELECTION.
SET PF-STATUS 'SELECT'.
add begin CR1591
Set ranges tables
PERFORM set_ranges.
add end CR1591
mod begin CR1591
**Selection of PO data from EKET into internal table t_purc.
PERFORM f_select_eket.
**Selection of corresponding PO data for EKET from EKES into t_ekes.
PERFORM f_select_ekes.
**Selection of material desc from MAKT table into T_makt.
PERFORM f_select_makt.
**Copy the contents of t_purc and t_makt into t_eket table.
PERFORM f_move_eket.
**Replace the corresponding entries of t_eket with t_ekes.
PERFORM f_update_eket.
Selection of PO data from EKET into internal table T_EKET.
PERFORM f_select_eket2.
Selection of corresponding PO data from EKES appending to T_EKET.
PERFORM f_select_ekes2.
Selection of material desc from MAKT table into T_MAKT.
PERFORM f_select_makt2.
mod end CR1591
*Selection of vendor product name.
PERFORM f_select_vpnam.
del begin CR1591
No need
**copy t_eket-ebelp into temporary variable.
PERFORM f_copy_ebelp.
del end CR1591
*selection of data from MLGN table into t_mlgn internal table
PERFORM f_select_mlgn.
*selection of data from marm table into t_marm internal table
PERFORM f_select_marm.
*selection of data from marc table into t_marc internal table
PERFORM f_select_marc.
*selection of data from lfa1 table into t_lfa1 internal table
PERFORM f_select_lfa1.
*Selection of data from LIPS table into t_lips internal table
PERFORM f_select_lips.
del begin CR1591
Don't display list screen when no data exists
*END-OF-SELECTION.
del end CR1591
*lines = sy-linno - 1.
*Collection of data into the final display internal table t_Display
PERFORM f_collect_final.
*Display the contents of t_display as a simple List
PERFORM f_list_display.
AT USER-COMMAND.
PERFORM f_select_layout.
INCLUDE zjpmipu315.
INCLUDE zjpmipu316.
*& Form f_check_MATNR_in_plant
This Routine is to check if the the selected material code is
available in the plant 'JP01'.
FORM f_check_matnr_in_plant.
DATA: l_matnr LIKE mara-matnr.
SELECT matnr UP TO 1 ROWS FROM marc
INTO l_matnr
WHERE
matnr = p_matnr AND
werks = c_werks.
ENDSELECT.
IF l_matnr IS INITIAL.
MESSAGE e000 WITH
'The material is not available in '(t02) c_werks 'plant'(t20).
ENDIF.
ENDFORM. " f_check_MATNR_in_plant
*& Form f_check_EBELN_in_EKPO
This Routine is to check if the Purchase order number selected
is existing or not and if it exists, check if it is related to
the plant 'JP01'.
FORM f_check_ebeln_in_ekpo.
DATA: l_ebeln LIKE ekpo-ebeln.
SELECT ebeln UP TO 1 ROWS FROM ekpo
INTO l_ebeln
WHERE
ebeln = p_ebeln AND
werks = c_werks.
ENDSELECT.
IF l_ebeln IS INITIAL.
MESSAGE e000 WITH
'PO not available or not related to '(t03) c_werks 'plant'(t21).
ENDIF.
ENDFORM. " f_check_EBELN_in_EKPO
*& Form f_check_matnr_in_ekko
This routine is to check if any PO exist for the selected
Material code.
FORM f_check_matnr_in_ekpo.
DATA: l_matnr LIKE ekpo-matnr.
SELECT matnr UP TO 1 ROWS FROM ekpo
INTO l_matnr
WHERE
matnr = p_matnr.
ENDSELECT.
IF l_matnr IS INITIAL.
MESSAGE e000 WITH
'PO does not exist for the material no'(t04) p_matnr.
ENDIF.
ENDFORM. " f_check_matnr_in_ekpo
*& Form f_check_date_in_eket
This routine is to check if any purchase order exists
with the selected
FORM f_check_date_in_eket.
DATA: l_eindt LIKE eket-eindt.
SELECT eindt UP TO 1 ROWS FROM eket
INTO l_eindt
WHERE
eindt IN s_date.
ENDSELECT.
IF l_eindt IS INITIAL.
MESSAGE e000 WITH
'No PO exist with the selected delivery date '(t05).
ENDIF.
ENDFORM. " f_check_date_in_eket
*& Form f_check_werks_in_ekpo
This Routine is to check if the selected purchase order
is associated with the plant JP01
FORM f_check_werks_in_ekpo.
DATA: l_ebeln LIKE ekpo-ebeln.
SELECT ebeln UP TO 1 ROWS FROM ekpo
INTO l_ebeln
WHERE
werks = c_werks.
ENDSELECT.
IF l_ebeln IS INITIAL.
MESSAGE e000 WITH
'The selected P0 is not relevant to '(t06) c_werks 'plant'(t22).
ENDIF.
ENDFORM. " f_check_werks_in_ekpo
*& Form f_select_eket
Routine to collect data from EKET, EKPO, MAKT, EKKO tables
using inner join and store the data into internal table
t_PURC. The data selection is based on the selection screen's
input.
FORM f_select_eket.
IF ( NOT s_date-low IS INITIAL ) AND
( p_matnr IS INITIAL ) AND
( p_ebeln IS INITIAL ).
SELECT
eket~ebeln
eket~ebelp
eket~eindt
eket~menge
eket~charg
ekpo~matnr
ekpo~werks
ekpo~meins
ekko~lifnr
INTO TABLE t_purc
FROM
( ( eket INNER JOIN ekko ON
eketebeln = ekkoebeln ) INNER JOIN ekpo ON
eketebelp = ekpoebelp AND
ekpoebeln = ekkoebeln )
WHERE
eket~eindt IN s_date AND
ekpo~werks = c_werks AND
ekpo~elikz NE c_x AND
ekko~bstyp EQ c_f AND
ekko~bsart NE c_zar.
ELSEIF ( NOT s_date-low IS INITIAL ) AND
( NOT p_matnr IS INITIAL ) AND
( p_ebeln IS INITIAL ).
SELECT
eket~ebeln
eket~ebelp
eket~eindt
eket~menge
eket~charg
ekpo~matnr
ekpo~werks
ekpo~meins
ekko~lifnr
INTO TABLE t_purc
FROM
( ( eket INNER JOIN ekko ON
eketebeln = ekkoebeln ) INNER JOIN ekpo ON
eketebelp = ekpoebelp AND
ekpoebeln = ekkoebeln )
WHERE
eket~eindt IN s_date AND
ekpo~matnr = p_matnr AND
ekpo~werks = c_werks AND
ekpo~elikz NE c_x AND
ekko~bstyp EQ c_f AND
ekko~bsart NE c_zar.
ELSEIF ( NOT s_date-low IS INITIAL ) AND
( NOT p_matnr IS INITIAL ) AND
( NOT p_ebeln IS INITIAL ).
SELECT
eket~ebeln
eket~ebelp
eket~eindt
eket~menge
eket~charg
ekpo~matnr
ekpo~werks
ekpo~meins
ekko~lifnr
INTO TABLE t_purc
FROM
( ( eket INNER JOIN ekko ON
eketebeln = ekkoebeln ) INNER JOIN ekpo ON
eketebelp = ekpoebelp AND
ekpoebeln = ekkoebeln )
WHERE
eket~eindt IN s_date AND
ekpo~matnr = p_matnr AND
ekpo~ebeln = p_ebeln AND
ekpo~werks = c_werks AND
ekpo~elikz NE c_x AND
ekko~bstyp EQ c_f AND
ekko~bsart NE c_zar.
ELSEIF ( s_date-low IS INITIAL ) AND
( p_matnr IS INITIAL ) AND
( NOT p_ebeln IS INITIAL ).
SELECT
eket~ebeln
eket~ebelp
eket~eindt
eket~menge
eket~charg
ekpo~matnr
ekpo~werks
ekpo~meins
ekko~lifnr
INTO TABLE t_purc
FROM
( ( eket INNER JOIN ekko ON
eketebeln = ekkoebeln ) INNER JOIN ekpo ON
eketebelp = ekpoebelp AND
ekpoebeln = ekkoebeln )
WHERE
ekpo~ebeln = p_ebeln AND
ekpo~werks = c_werks AND
ekpo~elikz NE c_x AND
ekko~bstyp EQ c_f AND
ekko~bsart NE c_zar.
ELSEIF ( NOT s_date-low IS INITIAL ) AND
( p_matnr IS INITIAL ) AND
( NOT p_ebeln IS INITIAL ).
SELECT
eket~ebeln
eket~ebelp
eket~eindt
eket~menge
eket~charg
ekpo~matnr
ekpo~werks
ekpo~meins
ekko~lifnr
INTO TABLE t_purc
FROM
( ( eket INNER JOIN ekko ON
eketebeln = ekkoebeln ) INNER JOIN ekpo ON
eketebelp = ekpoebelp AND
ekpoebeln = ekkoebeln )
WHERE
eket~eindt IN s_date AND
ekpo~ebeln = p_ebeln AND
ekpo~werks = c_werks AND
ekpo~elikz NE c_x AND
ekko~bstyp EQ c_f AND
ekko~bsart NE c_zar.
ENDIF.
IF sy-subrc <> 0.
MESSAGE s000 WITH 'Data not found'(t07).
LEAVE LIST-PROCESSING.
ELSE.
SORT t_purc.
ENDIF.
ENDFORM. " f_select_eket
*& Form f_select_makt
Routine to select the material description for all the
materials present in T_purc table
FORM f_select_makt.
DATA: l_t_makt(4) TYPE c VALUE 'MAKT'.
SELECT
matnr
maktx
FROM
makt
INTO TABLE t_makt
FOR ALL ENTRIES IN t_purc
WHERE
matnr = t_purc-matnr AND
spras = c_spras.
IF sy-subrc <> 0.
MESSAGE s000 WITH
'Relevant data not found in'(t09) l_t_makt 'table'(t23).
ELSE.
SORT t_makt.
ENDIF.
ENDFORM. " f_select_makt
*& Form f_move_eket
Routine to join data in T_PURC and T_MAKT tables into
internal table T_MAKT.
FORM f_move_eket.
LOOP AT t_purc.
t_eket-ebeln = t_purc-ebeln.
t_eket-ebelp = t_purc-ebelp.
t_eket-eindt = t_purc-eindt.
t_eket-menge = t_purc-menge.
t_eket-charg = t_purc-charg.
t_eket-matnr = t_purc-matnr.
t_eket-werks = t_purc-werks.
t_eket-meins = t_purc-meins.
t_eket-lifnr = t_purc-lifnr.
READ TABLE t_makt WITH KEY matnr = t_purc-matnr
BINARY SEARCH.
IF sy-subrc = 0.
t_eket-maktx = t_makt-maktx.
ENDIF.
APPEND t_eket.
CLEAR t_eket.
ENDLOOP.
ENDFORM. " f_move_eket
*& Form f_select_ekes
Routine to select EKES data for all corresponding entries
of T_EKET.
FORM f_select_ekes.
DATA: l_tabix TYPE i.
IF NOT s_date IS INITIAL.
SELECT
ebeln
ebelp
etens
eindt
menge
INTO TABLE t_ekes
FROM
ekes
WHERE
eindt IN s_date.
ELSE.
DESCRIBE TABLE t_purc LINES l_tabix.
IF l_tabix GT 0.
SELECT
ebeln
ebelp
etens
eindt
menge
dabmg
vbeln
vbelp
FROM
ekes
INTO TABLE t_ekes
FOR ALL ENTRIES IN t_eket
FOR ALL ENTRIES IN t_purc
WHERE
ebeln = t_purc-ebeln AND
ebelp = t_purc-ebelp AND
eindt IN s_date.
AND ebeln eq p_ebeln.
and matnr in p_matnr.
ENDIF.
CLEAR l_tabix.
IF NOT s_date IS INITIAL AND NOT p_ebeln IS INITIAL.
SELECT
ekes~ebeln
ekes~ebelp
ekes~etens
ekes~eindt
ekes~menge
ekes~dabmg
APPENDING TABLE t_ekes
FROM ekes
WHERE
eindt IN s_date AND
ebeln EQ p_ebeln AND
ebtyp EQ c_la.
ELSEIF NOT s_date IS INITIAL AND p_ebeln IS INITIAL.
SELECT
ekes~ebeln
ekes~ebelp
ekes~etens
ekes~eindt
ekes~menge
ekes~dabmg
APPENDING TABLE t_ekes
FROM ekes
WHERE
eindt IN s_date AND
ebeln EQ p_ebeln AND
ebtyp EQ c_la.
ELSEIF s_date IS INITIAL AND NOT p_ebeln IS INITIAL.
SELECT
ekes~ebeln
ekes~ebelp
ekes~etens
ekes~eindt
ekes~menge
ekes~dabmg
APPENDING TABLE t_ekes
FROM ekes
WHERE
eindt IN s_date AND
ebeln EQ p_ebeln AND
ebtyp EQ c_la.
ENDIF.
IF sy-subrc = 0.
SORT t_ekes.
ENDIF.
IF NOT t_ekes[] IS INITIAL.
t_ekes_temp[] = t_ekes[].
SORT t_ekes_temp BY ebeln ebelp.
DELETE ADJACENT DUPLICATES FROM t_ekes_temp COMPARING ebeln ebelp.
LOOP AT t_ekes_temp.
READ TABLE t_purc WITH KEY ebeln = t_ekes_temp-ebeln
ebelp = t_ekes_temp-ebelp.
IF sy-subrc NE 0.
CLEAR t_purc.
SELECT SINGLE
eket~ebeln
eket~ebelp
eket~eindt
eket~menge
eket~charg
ekpo~matnr
ekpo~werks
ekpo~meins
ekko~lifnr
INTO CORRESPONDING FIELDS OF t_purc
FROM
( ( eket INNER JOIN ekko ON
eketebeln = ekkoebeln ) INNER JOIN ekpo ON
eketebelp = ekpoebelp AND
ekpoebeln = ekkoebeln )
WHERE
eket~ebeln = t_ekes_temp-ebeln
AND eket~ebelp = t_ekes_temp-ebelp
AND ekpo~elikz NE c_x
AND ekko~bstyp EQ c_f
AND ekko~bsart NE c_zar.
IF sy-subrc EQ 0.
APPEND t_purc.
CLEAR t_purc.
ENDIF.
ENDIF.
ENDLOOP.
ENDIF.
REFRESH: t_ekes_temp, t_ekes.
CLEAR: t_ekes_temp, t_ekes.
Once the header is filled up get the details from EKES
SELECT ebeln ebelp etens eindt menge dabmg vbeln vbelp
INTO TABLE t_ekes
FROM ekes
FOR ALL ENTRIES IN t_purc
WHERE ebeln EQ t_purc-ebeln.
Mark the entries as 'X' which falls in the date range
LOOP AT t_ekes.
IF t_ekes-eindt IN s_date.
t_ekes-mark = 'X'.
MODIFY t_ekes INDEX sy-tabix TRANSPORTING mark.
ENDIF.
ENDLOOP.
SORT t_ekes BY ebeln ebelp ASCENDING mark DESCENDING.
Delete the entries from eket if no entries in EKES falls in the period
LOOP AT t_purc.
l_tabix = sy-tabix.
READ TABLE t_ekes WITH KEY ebeln = t_purc-ebeln
ebelp = t_purc-ebelp.
IF sy-subrc EQ 0.
IF t_ekes-mark NE 'X'.
DELETE t_purc INDEX l_tabix.
ENDIF.
ENDIF.
ENDLOOP.
delete the entries from EKES which do not fall in the specified period
DELETE t_ekes WHERE mark NE 'X'.
ENDFORM. " f_select_ekes
*& Form f_update_eket
Routine to substitute relevant t_eket entries with that of
t_ekes entries.It does not modify the remaining entries for
for which the corresponding values in t_ekes doesnot exist.
FORM f_update_eket.
DATA: BEGIN OF lt_temp_eket OCCURS 0,
ebeln LIKE eket-ebeln, "Purchasing Document Number
ebelp LIKE eket-ebelp, "Item Number of Purchasing Document
eindt LIKE eket-eindt, "Item delivery date
menge LIKE eket-menge, "Scheduled quantity
dabmg LIKE ekes-dabmg, " Delivered quantity
matnr LIKE ekpo-matnr, "Material code
maktx LIKE makt-maktx, "Material Description-- jp check
etens LIKE ekes-etens, "Sequence Number
meins LIKE ekpo-meins, "Unit of measure
lifnr LIKE ekko-lifnr, "Vendor number
charg LIKE eket-charg, " Batch number Added by PD 08/08/03
vbeln LIKE ekes-vbeln,
vbelp LIKE ekes-vbelp,
END OF lt_temp_eket,
l_menge LIKE ekes-menge.
LOOP AT t_eket.
LOOP AT t_ekes WHERE ebeln = t_eket-ebeln
AND ebelp = t_eket-ebelp.
Added by PD 08/08/03
MOVE t_eket-charg TO lt_temp_eket-charg.
addition ends
MOVE t_eket-ebeln TO lt_temp_eket-ebeln.
MOVE t_eket-ebelp TO lt_temp_eket-ebelp.
MOVE t_eket-meins TO lt_temp_eket-meins.
CLEAR l_menge.
l_menge = t_ekes-menge - t_ekes-dabmg.
IF l_menge LE 0.
CONTINUE.
ELSE.
MOVE l_menge TO lt_temp_eket-menge.
ENDIF.
MOVE t_ekes-eindt TO lt_temp_eket-eindt.
MOVE t_ekes-etens TO lt_temp_eket-etens.
MOVE t_eket-lifnr TO lt_temp_eket-lifnr.
MOVE t_eket-maktx TO lt_temp_eket-maktx.
MOVE t_eket-matnr TO lt_temp_eket-matnr.
MOVE t_ekes-vbeln TO lt_temp_eket-vbeln.
MOVE t_ekes-vbelp TO lt_temp_eket-vbelp.
APPEND lt_temp_eket.
CLEAR lt_temp_eket.
CLEAR t_ekes.
ENDLOOP.
IF sy-subrc NE 0.
Added by PD 08/08/03
MOVE t_eket-charg TO lt_temp_eket-charg.
addition ends
MOVE t_eket-ebelnDear
Problem No 1 : we are working in a process industries with three plants each of them have three order type. we have define MRP group in "OPPR" then assign each MRP group to Orde types in "OPPE". Now the problem is whn i convert plan order in process order for any material systme automaticaly pick the order type PIi01.
Answer :
1.Please check the OPPR -Plant and MRP group -Select Order Type Button -Check what Order Type you have assinged here ( PI01( May be the default Process Order Type )
2.If you are maintaing MRP group ( 0001 or 0002) , did you asisng the same in MRP1 view ?? because
3.Did you maintain the similar Order type in OPKP -Define Production Scheduling Profile ? -This has highest priority .
4.Did you maintain correct order type in OPJH-Maintain Order Type ??
Refer the expert comments on the same issue : Strategy group to define production order type
Problem No 2: 2nd Problem is system system is not creating plan order for prrevios dates. say i enter PIR for month of november from first november to 30th november and run MRP on 29th the sytem create plan order on 30th of november with exception message 30.
Answer : You can plan the order in back dated , if you maitain Satrt date in the Past optiuon in OPU3/OPU5-Define Scheduling parameters .Goto OPU3 -Select the Order Type -Double click -Maintain 90-60 days in the Start Date in the past in Scheduling Control and Details scheduling tab .
Hope it helps
regards
JH -
i need to authorize my computer but i am unable to do so as i am authorized to many times but i can't authorize the other computers because they are broken, what should i do?
About Authorization and Deauthorization.
Follow the instructions in the above link to deauthorize all and then authorize only the computers that you physically have access to and need authorized. -
Downloaded iTunes 11.0.2.26,the print CD jewel case does not print right,all the songs listed are printed in about a 1/2in. space,how can I get it to print right
I recently upgraded to itunes 11.0.1.12 and that fixed the CD Jewel Case Insert song titles problem. Thanks itunes. It's working great!!.
-
Translation from CS5 to Cloud doesn't work correct, navi and linked images are broken.
Translation from CS5 to Cloud doesn't work correct, <navi> and linked images are broken.
The data of CS5 was created at another PC. I installed Cloud version into two different PC. One has had the site data since dreamweaver CS5 and it works correct in Cloud version. Another PC got the site data from remote server and it doesn't work correct. <navi> and linked image are broken.Another PC got the site data from remote server and it doesn't work correct. <navi> and linked image are broken.
This implies your site is not properly defined in DW. Go to Site > Manage Sites.
Or simply go to your other installation of DW and export the site definition file from Manage Sites.
Save it to a flash stick or other removable drive. Then import the STE file into your 2nd installation of DW.
Nancy O.
Maybe you are looking for
-
if I run the following query from sys user then get the error SELECT COUNT(1) FROM SCOTT.USER_TABLES ORA-00942: TABLE OR VIEW does NOT exist why it is so ??
-
I accidently erased all my downloaded files from my videos to files, what can i do to restore?
Under settings i mistakenly erased my downloaded files. is there a way to restore those files?
-
How do you auto-size row height in a multi-column listbox with multiple lines?
I have a multi-column listbox containing four columns. The fourth column is for notes, which will be of arbitrary length; they can get to be very lengthy. I want the cells in the "notes" column to have a constant width. When the width of the text is
-
Hi Gurus, There are various assets costing less than 5000which are capitalised and 5% is claimed in the previous year. Current year these are standing as opening balances and normal depreciation claimed till june. Now the company has decided to claim
-
Roles........reuires to log into CRM web interface
I am getting the following error while logging into the we gui of CRM.It is giving me the following error "Logon is not possible because you have not been assigned to a business role". Do anybody have idea which role is required to log into the web g