Forward one port to multiple ip addresses WRT300n

Is it possible to forward one port to all IP addresses on the network. I tried to use the broadcast address but it doesnt allow that.
any help is appreciated

You can only forward traffic to a single IP address. Anything else is impossible. It would be like you talking to 10 persons at the same time... Total confusion...

Similar Messages

Forward camera port for static IP address

Hi.
I have a Foscam camera which I have used with a Netgear modem-router. I used UPNP to forward its port to my IP address. My ISP then gave me an address which accesses my own non-static IP at all times.
I have now purchased and installed the AirPort Extreme, and I need to setup my camera. Everything is working properly, other than external access to the camera.
I have disabled the camera's UPNP as I understand AirPort doesn't support it. I added a port forward option for both TCP and UDP for the camera's private IP. However, I still cannot get the camera to work.
I tried to change various options - toggled the NAT PMP, camera's UPNP, added a default host, but nothing seems to work - I can't access the camera externally.
Appreciate any assistance.
Edit: It is interesting that when I try to browse the camera webpage (from an external internet source), I get the 'server not found' message faster for all ports I do not use, and it is significantly slower for the port I forward (8000). So something does appear to be working...

Thanks for the reply.
I can't run wireshark (I don't know how, anyway) on the camera, but I tried to add a port forward for my laptop and ran wireshark there.
Then, I accessed from an external network my IP:port, and I did see some activity (obviously, there's no one to answer on port 12345).
This is the response:
http://imgur.com/RTYvGzB
So it appears something is working, but I am not sure why my camera doesn't "get" it when I try to access its port (where it does work with the internal IP).

Pick one of the multiple email address of a contact!

Hi,
In the current app that I am working on, the user is presented with the address book. Let's say the contact that is selected has multiple email addresses - Home, Work1, Work2 (in this order).
How can the app know which one the user picks? Let's say the user wants to select the Work2 address.
The code below has a for-loop that cycles thru all the values. I want to compare the value of mobileLabel to the value that the user selected in the AddressBook picker - how is that passed on to the app?
ABMultiValueRef emailProperty = ABRecordCopyValue(person, kABPersonEmailProperty);
NSString* email=@"";
NSString* mobileLabel;
for (CFIndex i = 0; i < ABMultiValueGetCount(emailProperty); i++)
mobileLabel=(NSString*)ABMultiValueCopyLabelAtIndex(emailProperty, i);
NSLog(@"mobileLabel = <%@>", mobileLabel);
// if ([mobileLabel isEqualToString:@"_$!<Mobile>!$_"])
// if ([mobileLabel isEqualToString:@"_$!<Home>!$_"])
email=(NSString*)ABMultiValueCopyValueAtIndex(emailProperty,i);
NSLog(@"email: <%@>", email);
self.emailFromPicker = email;
break;
[email release];

It's given to you in the delegate method.
- (BOOL)personViewController:(ABPersonViewController *)personViewController shouldPerformDefaultActionForPerson:(ABRecordRef)person property:(ABPropertyID)property identifier:(ABMultiValueIdentifier)identifierForValue
Parameters
personViewController
The sender.
person
The person personViewController is displaying.
property
The property whose value the user selected.
valueIdentifier
When property is a multivalue property, the value the user selected.
See the +ABPersonViewControllerDelegate Protocol Reference+.
Message was edited by: xnav

Setting up one contact with multiple email addresses-i.e Family & Friends

Would like to setup one contact " Family & Friends " and show multiple email addresses - such as 20 or 30 addresses - can this be done >??

I the Ipad contact app does not handle groups. However, there are apps such as Mail2Group. They have both free (lite) and more fully featured version.

One port - two devices

Hi all!
I have a problem about port 3074. I have Pc and I play Call of duty MW3 on it - the game uses port 3074, unfortunetely the same port is being used by Xbox Live. Is there a way to forward one port to both machines simultaneously? My router is Bt Home Hub v2.0

The simple answer is no.
NAT (Network Address Translation) can only forward an incoming port to one device.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Multiple email address with one server account

Why can't Mail have multiple email addresses on one email account? Like Thunderbird calls them Identities. As I remember, Outlook also supports this. I like Mail but it seems rather dated and clunky in this respect.
I am using mainly IMAP so maybe I should switch to Thunderbird but I do still have some old messages in pop accounts in Mail.

You can have multiple accounts, but only one "identity." Configure new mail accounts for all the different email addresses you may have. They can each have different configurations, different servers, etc. as well as be individually made active or inactive. All incoming mail will funnel into a single Inbox, but you can use rules to transfer incoming mail to separate mailboxes based on the account.
What you cannot have are distinct "personalities."
Bear in mind that Mail is intended for a single user and the vast number of single users only have one email account. I actually have four different email addresses but three of them are set to forward mail to the account I use with Mail. Mail works quite well with IMAP, POP, and Outlook mail accounts.

Port Forwarding and Printing with Static IP Address

Hey there -
I am trying to setup a network printer that can be printed to from anywhere in the world. My organization has 5 static IP addresses given to us by our ISP. Four of those I have on computers, and one of them I have on my Linksys router (WRT54G v.8).
What I want to do is be able to setup a printer on my router that I can print to from anywhere I have an internet connection. My wireless router's static IP address is 74.172.54.XXX - The address on my network is 192.168.7.1 - I have a printer statically assigned the IP address 192.168.7.2 - and I have a port forwarding for port 70 to forward to 192.168.7.2
In theory, I would think that now I could print to 74.172.54.XXX:70 and have no problems. But that doesn't seem to be working. Even printing to 192.168.7.1:70 doesn't seem to work either.
Also, the printer has a web GUI interface that if I type http://192.168.7.1/ into my browser it comes up, so in theory I would think typing http://74.172.54.XXX:70 into my browser it should come up (but it doesn't nor does http://192.168.7.1:70).
Anybody got any suggestions? I tried to do a search about this, but ever Port Forwarding question seemed to deal with gaming (which I have no desire to do). Thanks!
I will include two screen snapshots of what I am talking about:
Thanks for any help.

Is the router setup to accept static connections?
I have my router set up to accept both, so from 192.168.1.100 to 192.168.1.192 the addresses are static the other addresses are given by DHCP.
If you do not define a range and the address your laptop has as static IP conflicts with the address given by DHCP your loose ... as in you get no address.
Set up of that feature may depend on your type of router but usually any decent router will have that capability ... read your manual for specifics about your unit.
Best of luck.
R.
Last edited by ralvez (2009-12-10 00:08:50)

Exchange server 2010 forwarding to multiple email address

Is it possible to forward email from one address to multiple email address?

Hi,
On Exchange side, we can create a transport rule to copy the message to multiple addresses. The original recipients can see these addresses in Cc address. Or we can blind these addresses in Cc addresses. Here are detail steps:
Open EMC, navigate to Microsoft Exchange On-premises > Organization Configuration > Hub Transport
In middle panel, click on Transport Rules tab
In actions panel, click on New Transport Rule to create a transport rule.
Enter the name and comment of transport rule, then click
Next.
Select sent to people condition and click on people to add the email address you want to apply this rule to, then click
Next.
Select copy the message to addresses action (multiple addresses will show up in Cc address) or
Blind carbon copy(Bcc) the message to addresses action ( multiple addresses will show up in Bcc address and original recipient can’t see the Bcc address)
Click on addresses to add multiple addresses.
Then click on Next > Next > New to create and apply this transport rule.
Transport Rule Actions
http://technet.microsoft.com/en-us/library/aa998315(v=exchg.141).aspx
On Outlook client side, we can create email rule to achieve this goal. Here are steps:
Click File > Info > Manage Rules & Alerts
Click on New Rule, then select Apply rule on the messages I receive.
Click Next, select where my name is in the To or Cc box condition.
Click Next, select forward it to people or public group.
Click on people or public group to add multiple addresses.
Click Next > Next > Finish to create and apply this rule.
Best Regards.

How to configure multiple IP addresses on one NIC?

Hi,
I just installed a OVM Server in version 3.2.1 and the according VMManager. Now i wanted to try to configure the Server/Server Pool. Now i come across a problem, which was already a big problem in OVM 2 while configuring the Networks.
All our OVM Servers have three NICs in them. One is for VMs and Management, the others are for connection to our SAN (Dell PowerVault MD 3220i). My problem is, that due to the network setup, the two NICs for storage need two IP addresses in two different networks each. This shouldn't be a problem, because usually in linux all you have to do is configure something like eth1:1. I remember having huge trouble configuring it in our OVM 2 cluster up to the point where I had to write a shell script to configure the second IP.
Anyways, I have configured two of the storage networks on eth1 and eth2 of the VM Server. Now i cannot configure any more IP addresses, because eth1 and eth2 are not available anymore for configuration in a third network. I really hoped that it would be possible in OVM 3 to configure multiple IP addresses. And probably it is only my lack of knowledge of how to configure it.
So any advice is well appreciated.
Thanks!
Regards,
Marek Hubatka

You should be able to do this by using "VLAN Groups".
http://docs.oracle.com/cd/E35328_01/E35332/E35332.pdf
Check out the VLAN groups section. You must great the VLAN groups before you can assign them to interfaces.

ASA 5525X - Multiple outside addresses PAT to one inside address

Hi
I am trying to get two external addresses to PAT to different ports on the same address in the dmz.
Object NAT is configured as follows:
object network Obj-192.168.1.20-1
nat (dmz,outside) static Obj-External-1 service tcp https https
object network Onj-192.168.1.20-2
nat (dmz,outside) static Obj-External-2 service tcp 2000 https
Obj-192.168.1.20-1 and Obj-192.168.1.20-2 contain the same host address.
The idea being that traffic destined for Obj-External-1 on port 443 will be forwarded to Obj-192.168.1.20-1 on port 443. Traffic for Obj-External-2 on port 443 will be forwarded to Obj-192.168.20-2 on port 2000.
Traffic for the first object, Obj-192.168.1.20-1, works but traffic for the second does not.
Can anyone help?
Thanks
Paul

Thanks Jouni
Output below:
Phase: 1
Type: CAPTURE
Subtype:
Result: ALLOW
Config:
Additional Information:
MAC Access list
Phase: 2
Type: ACCESS-LIST
Subtype:
Result: ALLOW
Config:
Implicit Rule
Additional Information:
MAC Access list
Phase: 3
Type: UN-NAT
Subtype: static
Result: ALLOW
Config:
object network Obj-192.168.20-2
nat (dmz,outside) static Obj-External-2 service tcp 2000 https
Additional Information:
NAT divert to egress interface dmz
Untranslate 194.168.208.72/443 to 192.168.1.20/2000
Phase: 4
Type: ACCESS-LIST
Subtype: log
Result: ALLOW
Config:
access-group outside_access_in in interface outside
access-list outside_access_in extended permit tcp any object Obj-192.168.1.20-1 eq 2000
Additional Information:
Phase: 5
Type: IP-OPTIONS
Subtype:
Result: ALLOW
Config:
Additional Information:
Phase: 6
Type: INSPECT
Subtype: inspect-skinny
Result: ALLOW
Config:
class-map inspection_default
match default-inspection-traffic
policy-map global_policy
class inspection_default
inspect skinny
service-policy global_policy global
Additional Information:
Phase: 7
Type: IDS
Subtype:
Result: ALLOW
Config:
Additional Information:
Phase: 8
Type: VPN
Subtype: ipsec-tunnel-flow
Result: ALLOW
Config:
Additional Information:
Phase: 9
Type: NAT
Subtype: rpf-check
Result: ALLOW
Config:
object network Obj-192.168.1.20-2
nat (dmz,outside) static Obj-External-2 service tcp 2000 https
Additional Information:
Phase: 10
Type: IP-OPTIONS
Subtype:
Result: ALLOW
Config:
Additional Information:
Phase: 11
Type: FLOW-CREATION
Subtype:
Result: ALLOW
Config:
Additional Information:
New flow created with id 7479639, packet dispatched to next module
Result:
input-interface: outside
input-status: up
input-line-status: up
output-interface: dmz
output-status: up
output-line-status: up
Action: allow

How do I add multiple email addresses i have received (900) to my address book instead of doing it one by one?

how do I add multiple email addresses i have received (+ -900) to my address book instead of having to do it one by one?

Grab them all and drag them to the Address Book.
Roger

How do I copy multiple email addresses from one email sent TO me into a new message?

How do I copy multiple email addresses from an email sent to me into a new message?

Are they in the body of the mail?
Hold your finger down in that mail until the little blue bubble pops up. One of the options should be to select all. Choose that and all will be hilighted. then a pop up comes up to copy, choose that, open your destination and hold your finger down to get the paste dialogue.

I am sending emails to a Smart Group created in my address book. The contact in my address book has multiple email addresses. Is there a way for the email to go to both addresses? (ex: work and home email address under one contact)

In my address book, I have contacts that have multiple email addresses. (ex: home and work) I have created a smart group off of the company name in the contact. When I send emails, I want it to go to both email address listed in the contact. Is there a way to make this happen? Or do I have to have a separate contact for each email address?

I will agree with you on this one. Version 31 and all the fixes so far are a mess. Since I have been here answering questions for a little more than a year now I have learned to wait to upgrade until all the dust settles. I see no end to the dust storm version 31 has caused. I am still on version 24.6 and plan on staying there for the duration. At least until the developers comes to their senses and put out a working product.

How can I forward a mail to multiple mail accounts that I have in a group without having to add them one by one?

How can I forward a mail to multiple mail accounts that I have in a group without having to add them one by one?

I don't think that you can. Yahoo's basic email features do not include mail forwarding.

How do I access my address book when forwarding an email to multiple addresses. I want to be able to view the names and click on them.

I'm trying to forward an email to multiple addresses. I want to be able to view my address book and click on the names I want to the email sent to. How can I do this. Have a MacBook Pro. Thanks.

this is not MBPro forum.
you want Maill Community and if you want to lean how to use Mail, start with Help menu and then I assume you would use BCC
http://www.apple.com/support/mail

Forward one port to multiple ip addresses WRT300n

Similar Messages

Maybe you are looking for