Fpga HDL code generator
Hello,
It seems that FPGA module cannot interface custom FPGA board.
I wonder if FPGA can be used as a HDL code generator.
Here is what I'd like to do :
- code an algorithm in a LabVIEW block diagram
- make a HDL from the BG with FPGA module
- build the HDL code in my FPGA IDE (Quartus II, in this case)
- download it in my FPGA target with the JTAG probe
- use RS232 (or any VISA interface) to communicate the results to another LabVIEW vi
The main question is : can LabVIEW FPGA module generate HDL code ?
Thanks,
Hello,
The LabVIEW FPGA module generates *.vhd files, located in the directory C:\NIFPGA80\clntTmp\[projectDir]\ (if you use LabVIEW 8.0); those files are then sent to Xilinx tools to generate the FPGA bitfile. LabVIEW FPGA module is not designed for non-NI products, this is why those intermediate files are encrypted.
Cordially,
.mrLeft{float:left} .mrInfo{border-left:solid 1px #989898;font-size:x-small;color:#989898}
Mathieu R.
CTD - Certified TestStand Developer / Développeur TestStand Certifié
CLAD - Certified LabVIEW Associate Developer
Similar Messages
-
Warning codes generated in UCCHECK - Technical Upgrade - 4.0b to ECC 6.0
Hi SDN'ers ,
I am currently working on Technical Upgrade project from 4.0 b system to ECC 6.0 system . I am facing a
problem relating to the analysis of the warnings displayed whehn we run the UCCHECK for the client inventory by
checking the "Display lines that cannot be analyzed statically" option under the Selection-screen block
"Statements that cannot be analyzed statically" .Based on the warning codes generated during UCCHECK, they can
be classified into 12 different categories given below in the list ( Viz. ABB,MESSAGEG!C,MESSAGEG!D......MESSAGEG!P).The same are given below in the end
I want to know
- Which are the warning codes which need resolution so that the program does not encounter any runtime
errors or during Integration testing ?
- Do all the offset related errors (For example ;variable A = B+offset(length)
or variable A+offset(length) = B ) need resolution so that the program gives no runtime error.
- Also, do all statements where length is calculated using STRLEN also need changes ? I have seen offset length related warnings come under MESSAGEG!M warning code.
The objective of this is to make sure that the upgraded system ECC 6.0 in Australia ,when rolled out to
non-English speaking geographies in APAc such as Malaysia,Japan or China would only need translations and no ABAP Coding effort even when using languages such as Japanese which have double byte characters.
S.No. Error Code Message
1 ABB Syntax Check Aborted
ABB Total
2 MESSAGEG!C check at runtime. at runtime.
statement because of untyped or generic operands. It can only carry out this
The system could not perform a static convertibility check on the current
MESSAGEG!C Total
3 MESSAGEG!D out this check at runtime. It can only carry out this check at runtime.
to a table line because of untyped or generic operands. It can only carry out
The system could not perform a static check on convertibility from a work area
MESSAGEG!D Total
4 MESSAGEG!E check at runtime. at runtime.
defined by a "DATA" statement. .
statement because of untyped or generic operands. It can only carry out this
Field "ELEMENTN" is unknown. It is neither in one of the specified tables nor
The system could not perform a static comparability check on the current
MESSAGEG!E Total
5 MESSAGEG!F operand "<FELD1>" for the current statement. .
MESSAGEG!F Total
6 MESSAGEG!G current statement on incompletely typed operand "<DATA>". .
MESSAGEG!G Total
7 MESSAGEG!H for the incompletely typed operand "<S>". . - - - - - - - - -
The system cannot perform a static check on a character-type field data type
MESSAGEG!H Total
8 MESSAGEG!I incompletely-typed operand "<A>" in the current statement. .
The system cannot perform a static check on a character-type data type for the
MESSAGEG!I Total
9 MESSAGEG!J "<%_1_SYSINI>" in the current statement to check whether the operand can be
The system cannot perform a static check on incompletely-typed operand "VALUE"
MESSAGEG!J Total
Early response wil be highly appreciated.Hi Karthik
>
> 1) SPDD adjustments are done in which phase? PREPARE or UPGRADE?
>
SPDD is done in Upgrade ->Phase ACT_700
> 2) Are here special cases where the adjustments need to be done before running the UPGRADE phase?
>
At ACT_700 phase stop the upgrade and take a backup of the DB and the PUT<DIR> before starting the SPDD activity.
Make sure there are no pending tp request. Either release them or delete them.
All phase need to be completed successfully in PREPARE, before starting UPGRADE
Cheers
Shaji
Edited by: Shaji Jacob on May 5, 2008 9:23 PM -
Warning codes generated in UCCHECK
Hi SDN'ers ,
I am currently working on Technical Upgrade project from 4.0 b system to ECC 6.0 system . I am facing a
problem relating to the analysis of the warnings displayed whehn we run the UCCHECK for the client inventory by
checking the "Display lines that cannot be analyzed statically" option under the Selection-screen block
"Statements that cannot be analyzed statically" .Based on the warning codes generated during UCCHECK, they can
be classified into 12 different categories given below in the list ( Viz. ABB,MESSAGEG!C,MESSAGEG!D......MESSAGEG!P).The same are given below in the end
I want to know
- Which are the warning codes which need resolution so that the program does not encounter any runtime
errors or during Integration testing ?
- Do all the offset related errors (For example ;variable A = B+offset(length)
or variable A+offset(length) = B ) need resolution so that the program gives no runtime error.
- Also, do all statements where length is calculated using STRLEN also need changes ? I have seen offset length related warnings come under MESSAGEG!M warning code.
The objective of this is to make sure that the upgraded system ECC 6.0 in Australia ,when rolled out to
non-English speaking geographies in APAc such as Malaysia,Japan or China would only need translations and no ABAP Coding effort even when using languages such as Japanese which have double byte characters.
S.No. Error Code Message
1 ABB Syntax Check Aborted
ABB Total
2 MESSAGEG!C check at runtime. at runtime.
statement because of untyped or generic operands. It can only carry out this
The system could not perform a static convertibility check on the current
MESSAGEG!C Total
3 MESSAGEG!D out this check at runtime. It can only carry out this check at runtime.
to a table line because of untyped or generic operands. It can only carry out
The system could not perform a static check on convertibility from a work area
MESSAGEG!D Total
4 MESSAGEG!E check at runtime. at runtime.
defined by a "DATA" statement. .
statement because of untyped or generic operands. It can only carry out this
Field "ELEMENTN" is unknown. It is neither in one of the specified tables nor
The system could not perform a static comparability check on the current
MESSAGEG!E Total
5 MESSAGEG!F operand "<FELD1>" for the current statement. .
MESSAGEG!F Total
6 MESSAGEG!G current statement on incompletely typed operand "<DATA>". .
MESSAGEG!G Total
7 MESSAGEG!H for the incompletely typed operand "<S>". . - - - - - - - - -
The system cannot perform a static check on a character-type field data type
MESSAGEG!H Total
8 MESSAGEG!I incompletely-typed operand "<A>" in the current statement. .
The system cannot perform a static check on a character-type data type for the
MESSAGEG!I Total
9 MESSAGEG!J "<%_1_SYSINI>" in the current statement to check whether the operand can be
The system cannot perform a static check on incompletely-typed operand "VALUE"
MESSAGEG!J Total
Early response wil be highly appreciated.
10 MESSAGEG!K "<F_YEAR>" in the current statement to check whether the operand can be
The system cannot perform a static check for incompletely-typed operand "WINY2"
MESSAGEG!K Total
11 MESSAGEG!M .
at runtime. .
check will take place at runtime. .
entries for operand "<F_SOURCE>(2)". This check will take place at runtime. .
entries for operand "<F_SOURCE>+2(2)". This check will take place at runtime.
The system cannot perform a static check on the validity of the offset/length
MESSAGEG!M Total
12 MESSAGEG!P out this check at runtime. at runtime.
statement because of untyped or generic operands. The system can only carry
The system could not perform a static compatibility check on the current
MESSAGEG!P Total
Grand TotalHi Monica,
as bhaskar said no need to worry about warnings.
warnings will not lead to dump. only runtime errors will lead to dump.
if the system is unicode, remediate the objects without errors.
we can observe mainly,
open dataset, structure incompatibilty, offset, in byte or char mode etc
thanks
vinod -
Code generate report in excel format from portal(Application Server)
Hi all
Please give some solution with code generate report in excel format from
oracle portal(Application Server).Not feasible.
Why? Because "the Excel format" is a binary and proprietary Microsoft file format. And writing a generator to generate Excel files will be complex, and resource expensive. In the vast majority of cases this will not be justified.
As an alternative the very basic Microsoft XML office format can be used. But note that this is not a a ISO standard (it has been shot down in flames) - and effort and resources for that would be better spend on the Open Document XML standard (which very likely will be ratified as the ISO standard instead).
Of course, you could have meant a CSV file - in which case, you need to play close attention to details. CSV is not an Excel format. A software designers and developers, our success is determined by attention to technical detail. In which case you are not paying any attention to technical detail by confusing CSV with Excel. -
How do I make this code generate a new pro when the "NEXT" button is pushed
How do I make this code generate a new set of problem when the "NEXT" Button is pushed
* To change this template, choose Tools | Templates
* and open the template in the editor.
/* Figure out how to create a new set of problms
* Type a list of specifications, include a list of test cases
* DONE :]
package javaapplication1;
import java.awt.GridLayout;
import java.awt.Window;
import javax.swing.*;
import java.awt.event.*;
* @author Baba Akinlolu -
class Grid extends JFrame{
int done = 0;
final int score = 0;
final int total = 0;
//Create Panels
JPanel p2 = new JPanel();
JPanel p3 = new JPanel();
final JPanel p1 = new JPanel();
//Create Radio buttons & group them
ButtonGroup group = new ButtonGroup();
final JRadioButton ADD = new JRadioButton("Addition");
final JRadioButton SUB = new JRadioButton("Subtraction");
final JRadioButton MUL = new JRadioButton("Multiplication");
final JRadioButton DIV = new JRadioButton("Division");
//Create buttons
JButton NEXT = new JButton("NEXT");
JButton END = new JButton("End");
//Create Labels
JLabel l1 = new JLabel("First num");
JLabel l2 = new JLabel("Second num");
JLabel l3 = new JLabel("Answer:");
JLabel l4 = new JLabel("Score:");
final JLabel l5 = new JLabel("");
JLabel l6 = new JLabel("/");
final JLabel l7 = new JLabel("");
//Create Textfields
final JTextField number = new JTextField(Generator1());
final JTextField number2 = new JTextField(Generator1());
final JTextField answer = new JTextField(5);
Grid(){
setLayout(new GridLayout(4, 4, 2 , 2));
p2.add(ADD);
p2.add(SUB);
group.add(ADD);
group.add(SUB);
group.add(MUL);
group.add(DIV);
p2.add(ADD);
p2.add(SUB);
p2.add(DIV);
p2.add(MUL);
//Add to panels
p1.add(l1);
p1.add(number);
p1.add(l2);
p1.add(number2);
p1.add(l3);
p1.add(answer);
p1.add(l4);
p1.add(l5);
p1.add(l6);
p1.add(l7);
p3.add(NEXT);
p3.add(END);
//Add panels
add(p2);
add(p1);
add(p3);
//Create Listners
Listeners();
void Listeners(){
NEXT.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
int answer1 = 0;
//Grab the numbers entered
int numm1 = Integer.parseInt(number.getText());
int numm2 = Integer.parseInt(number2.getText());
int nummsanswer = Integer.parseInt(answer.getText());
//Set the score and total into new variabls
int nummscore = score;
int nummtotal = total;
//Check if the add radio button is selected if so add
if (ADD.isSelected() == true){
answer1 = numm1 + numm2;
//otherwise check if the subtract button is selected if so subtract
else if (SUB.isSelected() == true){
answer1 = numm1 - numm2;
//check if the multiplication button is selected if so multiply
else if (MUL.isSelected() == true){
answer1 = numm1 * numm2;
//check if the division button is selected if so divide
else if (DIV.isSelected() == true){
answer1 = numm1 / numm2;
//If the answer user entered is the same with th true answer
if (nummsanswer == answer1){
//add to the total and score
nummtotal += 1;
nummscore += 1;
//Convert the input back to String
String newscore = String.valueOf(nummscore);
String newtotal = String.valueOf(nummtotal);
//Set the text
l5.setText(newscore);
l7.setText(newtotal);
//Otherwise just increase the total counter
else {
nummtotal += 1;
String newtotal = String.valueOf(nummtotal);
l7.setText(newtotal);
//Create End listener
END.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
// get the root window and call dispose on it
Window win = SwingUtilities.getWindowAncestor(p1);
win.dispose();
//new Grid();
String Generator1(){
int randomnum;
randomnum = (1 + (int)(Math.random() * 100));
String randomnumm = String.valueOf(randomnum);
return randomnumm;
public class Main {
* @param args the command line arguments
public static void main(String[] args) {
// TODO code application logic here
JFrame frame = new Grid();
frame.setTitle("Flashcard Testing");
frame.setSize(500, 200);
frame.setLocationRelativeTo(null);
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.setVisible(true);
}Edited by: SirSaula on Dec 7, 2009 10:17 AMNot only are you continuing to post in the wrong forum but now you are multiposting: [http://forums.sun.com/thread.jspa?threadID=5418935]
If people haven't answered you other posting its probably because we don't understand the question. Quit cluttering the forum by asking the same question over and over and then next time you have a new question post it in the proper forum. Your first posting was moved becuase you didn't post it properly. -
NI工程師你好
我在FPGA端使用sine wave generator
可是出來的波形卻不是一個完整的Sin波圖形
可以請工程師幫我解答一下嗎??
已解決!
轉到解決方案。
附件:
sin.png 10 KB
sin-1.png 13 KB好吧,我認為問題可能是您使用的圖表上的FPGA。不幸的是,LabVIEW的通信方式,有時會導致與 FPGA圖表更新不當,因為他們目前沒有時間同步的時間在芯片上。我組建了一個簡單的應用程序,而不是傳輸分回的主機和波形似乎是正確的。讓我知道這是否有助於。
附件:
Sine.zip 317 KB -
OWB Code generator - does not generate consistent code in every deployment
Hi,
I have a mapping to load dimension WM_USERS_ADVISORS_DIM.
Every time I generate the code for this mapping code generated is different than previous. Hence the query optimization applied at database level does not work.
following are 2 different queries generated for the same mapping.
Also, In target load order for this dimension, automatically values are populated like USERS_ADVISORS_STG, where as I have not declared this table/dim.
I am unable to remove this from load order. Every time code gets generated these _STG is added to each level in Dimension.
Please suggest how to have a consistent ETL generated every single time ETL deploys?
INSERT /*+ APPEND PARALLEL ("USERS_ADVISORS_STG") */ INTO "OWB$ *USERS_ADVISORS__1FFE2A* " "USERS_ADVISORS_STG" ( "PERSON_ID", "ADVISOR_PERSON_ID", "INVITE_CLIENT_ID", "IS_PRIMARY_ADVISOR", "SCHEMA_NAME", "DUMMY_LEVEL_KEY", "DESCRIPTION", "DUMMY_VALUE") (SELECT "INGRP1". "PERSON_ID" "PERSON_ID$10", "INGRP1". "ADVISOR_PERSON_ID" "ADVISOR_PERSON_ID$10", "INGRP1". "INVITE_CLIENT_ID" "INVITE_CLIENT_ID$8", "INGRP1". "IS_PRIMARY_ADVISOR" "IS_PRIMARY_ADVISOR$10", "INGRP1". "SCHEMA_NAME" "SCHEMA_NAME$9", "INGRP2". "DUMMY_LEVEL_KEY" "DUMMY_LEVEL_KEY$8", "INGRP2". "DESCRIPTION" "DESCRIPTION$12", "INGRP1". "LOOKUP$$$_1_DUMMY_VALUE" "LOOKUP$$$_1_DUMMY_VALUE$6" FROM ( SELECT "LOOKUP_INPUT_SUBQUERY$5". "USERS_ADVISORS_KEY$6" "USERS_ADVISORS_KEY", "LOOKUP_INPUT_SUBQUERY$5". "PERSON_ID$11" "PERSON_ID", "LOOKUP_INPUT_SUBQUERY$5". "ADVISOR_PERSON_ID$11" "ADVISOR_PERSON_ID", "LOOKUP_INPUT_SUBQUERY$5". "INVITE_CLIENT_ID$9" "INVITE_CLIENT_ID", "LOOKUP_INPUT_SUBQUERY$5". "IS_PRIMARY_ADVISOR$11" "IS_PRIMARY_ADVISOR", "LOOKUP_INPUT_SUBQUERY$5". "SCHEMA_NAME$10" "SCHEMA_NAME", "LOOKUP_INPUT_SUBQUERY$5". "LOOKUP$$$_1_DUMMY_VALUE$7" "LOOKUP$$$_1_DUMMY_VALUE" FROM (SELECT "DEDUP_SRC_0$2". "USERS_ADVISORS_KEY$7" "USERS_ADVISORS_KEY$6", "DEDUP_SRC_0$2". "PERSON_ID$12" "PERSON_ID$11", "DEDUP_SRC_0$2". "ADVISOR_PERSON_ID$12" "ADVISOR_PERSON_ID$11", "DEDUP_SRC_0$2". "INVITE_CLIENT_ID$10" "INVITE_CLIENT_ID$9", "DEDUP_SRC_0$2". "IS_PRIMARY_ADVISOR$12" "IS_PRIMARY_ADVISOR$11", "DEDUP_SRC_0$2". "SCHEMA_NAME$11" "SCHEMA_NAME$10", "DEDUP_SRC_0$2". "LOOKUP$$$_1_DUMMY_VALUE$8" "LOOKUP$$$_1_DUMMY_VALUE$7" FROM (SELECT CAST (NULL AS NUMERIC) "USERS_ADVISORS_KEY$7", "AGG_INPUT$2". "PERSON_ID$13" "PERSON_ID$12", "AGG_INPUT$2". "ADVISOR_PERSON_ID$13" "ADVISOR_PERSON_ID$12", MIN( "AGG_INPUT$2". "INVITE_CLIENT_ID$11") "INVITE_CLIENT_ID$10", MIN( "AGG_INPUT$2". "IS_PRIMARY_ADVISOR$13") "IS_PRIMARY_ADVISOR$12", "AGG_INPUT$2". "SCHEMA_NAME$12" "SCHEMA_NAME$11", MIN( "AGG_INPUT$2". "LOOKUP$$$_1_DUMMY_VALUE$9") "LOOKUP$$$_1_DUMMY_VALUE$8" FROM (SELECT ( :B4 ) "USERS_ADVISORS_KEY$8", "USER_ADVISOR". "PERSON_ID" "PERSON_ID$13", "USER_ADVISOR". "ADVISOR_PERSON_ID" "ADVISOR_PERSON_ID$13", "INVITE_CLIENTS". "INVITE_CLIENT_ID" "INVITE_CLIENT_ID$11", "USER_ADVISOR". "IS_PRIMARY_ADVISOR" "IS_PRIMARY_ADVISOR$13", ( :B3 ) "SCHEMA_NAME$12", 0 "LOOKUP$$$_1_DUMMY_VALUE$9" FROM ( SELECT "SET_OPERATION$2". "PERSON_ID$14" "PERSON_ID", "SET_OPERATION$2". "ADVISOR_PERSON_ID$14" "ADVISOR_PERSON_ID", "SET_OPERATION$2". "CREATED_ON$2" "CREATED_ON", "SET_OPERATION$2". "IS_PRIMARY_ADVISOR$14" "IS_PRIMARY_ADVISOR", "SET_OPERATION$2". "MOD_TAG$2" "MOD_TAG", "SET_OPERATION$2". "MODIFIED_ON$2" "MODIFIED_ON" FROM (SELECT "PERSON_ID" "PERSON_ID$14", "ADVISOR_PERSON_ID" "ADVISOR_PERSON_ID$14", "CREATED_ON" "CREATED_ON$2", "IS_PRIMARY_ADVISOR" "IS_PRIMARY_ADVISOR$14", "MOD_TAG" "MOD_TAG$2", "MODIFIED_ON" "MODIFIED_ON$2" FROM (SELECT "USERS_ADVISORS". "PERSON_ID" "PERSON_ID", "USERS_ADVISORS". "ADVISOR_PERSON_ID" "ADVISOR_PERSON_ID", "USERS_ADVISORS". "CREATED_ON" "CREATED_ON", "USERS_ADVISORS". "IS_PRIMARY_ADVISOR" "IS_PRIMARY_ADVISOR", "USERS_ADVISORS". "MOD_TAG" "MOD_TAG", "USERS_ADVISORS". "MODIFIED_ON" "MODIFIED_ON" FROM "ADVIEWPROD". "USERS_ADVISORS" "USERS_ADVISORS" UNION SELECT "USERS_ADVISORS_DLOG". "PERSON_ID" "PERSON_ID", "USERS_ADVISORS_DLOG". "ADVISOR_PERSON_ID" "ADVISOR_PERSON_ID", "USERS_ADVISORS_DLOG". "CREATED_ON" "CREATED_ON", "USERS_ADVISORS_DLOG". "IS_PRIMARY_ADVISOR" "IS_PRIMARY_ADVISOR", "USERS_ADVISORS_DLOG". "MOD_TAG" "MOD_TAG", "USERS_ADVISORS_DLOG". "MODIFIED_ON" "MODIFIED_ON" FROM "ADVIEWPROD". "USERS_ADVISORS_DLOG" "USERS_ADVISORS_DLOG") ) "SET_OPERATION$2" ) "USER_ADVISOR" LEFT OUTER JOIN ( SELECT "INVITE_CLIENTS". "ADVISOR_PERSON_ID" "ADVISOR_PERSON_ID", "INVITE_CLIENTS". "PERSON_ID" "PERSON_ID", "INVITE_CLIENTS". "INVITE_CLIENT_ID" "INVITE_CLIENT_ID" FROM "ADVIEWPROD". "INVITE_CLIENTS" "INVITE_CLIENTS" ) "INVITE_CLIENTS" ON ( (( "USER_ADVISOR". "PERSON_ID" = "INVITE_CLIENTS". "PERSON_ID" )) AND (( "USER_ADVISOR". "ADVISOR_PERSON_ID" = "INVITE_CLIENTS". "ADVISOR_PERSON_ID" )) ) WHERE ( ( "USER_ADVISOR". "CREATED_ON" BETWEEN (TO_DATE( ( :B2 ) , 'mm/dd/yyyy hh24:mi:ss') ) AND (TO_DATE( ( :B1 ) , 'mm/dd/yyyy hh24:mi:ss') ) OR "USER_ADVISOR". "MODIFIED_ON" BETWEEN (TO_DATE( ( :B2 ) , 'mm/dd/yyyy hh24:mi:ss') ) AND (TO_DATE( ( :B1 ) , 'mm/dd/yyyy hh24:mi:ss') ) ) ) ) "AGG_INPUT$2" GROUP BY "AGG_INPUT$2". "PERSON_ID$13", "AGG_INPUT$2". "ADVISOR_PERSON_ID$13", "AGG_INPUT$2". "SCHEMA_NAME$12" ) "DEDUP_SRC_0$2" ) "LOOKUP_INPUT_SUBQUERY$5" WHERE ( (NOT ( "LOOKUP_INPUT_SUBQUERY$5". "PERSON_ID$11" IS NULL AND "LOOKUP_INPUT_SUBQUERY$5". "ADVISOR_PERSON_ID$11" IS NULL AND "LOOKUP_INPUT_SUBQUERY$5". "SCHEMA_NAME$10" IS NULL)) ) ) "INGRP1" LEFT OUTER JOIN ( SELECT "DUMMY_LEVEL_0". "DUMMY_LEVEL_KEY" "DUMMY_LEVEL_KEY", "DUMMY_LEVEL_0". "DUMMY_VALUE" "DUMMY_VALUE", "DUMMY_LEVEL_0". "DESCRIPTION" "DESCRIPTION" FROM "WM_USERS_ADVISORS_DIM" "DUMMY_LEVEL_0" WHERE ( "DUMMY_LEVEL_0". "DIMENSION_KEY" = "DUMMY_LEVEL_0". "DUMMY_LEVEL_KEY" ) AND ( "DUMMY_LEVEL_0". "DUMMY_LEVEL_KEY" IS NOT NULL ) ) "INGRP2" ON ( ( "INGRP1". "LOOKUP$$$_1_DUMMY_VALUE" = "INGRP2". "DUMMY_VALUE" ) ) )
INSERT /*+ APPEND PARALLEL ("USERS_ADVISORS_STG") */ INTO "OWB$ *USERS_ADVISORS__1FEA66* " "USERS_ADVISORS_STG" ( "PERSON_ID", "ADVISOR_PERSON_ID", "INVITE_CLIENT_ID", "IS_PRIMARY_ADVISOR", "SCHEMA_NAME", "DUMMY_LEVEL_KEY", "DESCRIPTION", "DUMMY_VALUE") (SELECT "INGRP1". "PERSON_ID" "PERSON_ID$10", "INGRP1". "ADVISOR_PERSON_ID" "ADVISOR_PERSON_ID$10", "INGRP1". "INVITE_CLIENT_ID" "INVITE_CLIENT_ID$8", "INGRP1". "IS_PRIMARY_ADVISOR" "IS_PRIMARY_ADVISOR$10", "INGRP1". "SCHEMA_NAME" "SCHEMA_NAME$9", "INGRP2". "DUMMY_LEVEL_KEY" "DUMMY_LEVEL_KEY$8", "INGRP2". "DESCRIPTION" "DESCRIPTION$12", "INGRP1". "LOOKUP$$$_1_DUMMY_VALUE" "LOOKUP$$$_1_DUMMY_VALUE$6" FROM ( SELECT "LOOKUP_INPUT_SUBQUERY$5". "USERS_ADVISORS_KEY$6" "USERS_ADVISORS_KEY", "LOOKUP_INPUT_SUBQUERY$5". "PERSON_ID$11" "PERSON_ID", "LOOKUP_INPUT_SUBQUERY$5". "ADVISOR_PERSON_ID$11" "ADVISOR_PERSON_ID", "LOOKUP_INPUT_SUBQUERY$5". "INVITE_CLIENT_ID$9" "INVITE_CLIENT_ID", "LOOKUP_INPUT_SUBQUERY$5". "IS_PRIMARY_ADVISOR$11" "IS_PRIMARY_ADVISOR", "LOOKUP_INPUT_SUBQUERY$5". "SCHEMA_NAME$10" "SCHEMA_NAME", "LOOKUP_INPUT_SUBQUERY$5". "LOOKUP$$$_1_DUMMY_VALUE$7" "LOOKUP$$$_1_DUMMY_VALUE" FROM (SELECT "DEDUP_SRC_0$2". "USERS_ADVISORS_KEY$7" "USERS_ADVISORS_KEY$6", "DEDUP_SRC_0$2". "PERSON_ID$12" "PERSON_ID$11", "DEDUP_SRC_0$2". "ADVISOR_PERSON_ID$12" "ADVISOR_PERSON_ID$11", "DEDUP_SRC_0$2". "INVITE_CLIENT_ID$10" "INVITE_CLIENT_ID$9", "DEDUP_SRC_0$2". "IS_PRIMARY_ADVISOR$12" "IS_PRIMARY_ADVISOR$11", "DEDUP_SRC_0$2". "SCHEMA_NAME$11" "SCHEMA_NAME$10", "DEDUP_SRC_0$2". "LOOKUP$$$_1_DUMMY_VALUE$8" "LOOKUP$$$_1_DUMMY_VALUE$7" FROM (SELECT CAST (NULL AS NUMERIC) "USERS_ADVISORS_KEY$7", "AGG_INPUT$2". "PERSON_ID$13" "PERSON_ID$12", "AGG_INPUT$2". "ADVISOR_PERSON_ID$13" "ADVISOR_PERSON_ID$12", MIN( "AGG_INPUT$2". "INVITE_CLIENT_ID$11") "INVITE_CLIENT_ID$10", MIN( "AGG_INPUT$2". "IS_PRIMARY_ADVISOR$13") "IS_PRIMARY_ADVISOR$12", "AGG_INPUT$2". "SCHEMA_NAME$12" "SCHEMA_NAME$11", MIN( "AGG_INPUT$2". "LOOKUP$$$_1_DUMMY_VALUE$9") "LOOKUP$$$_1_DUMMY_VALUE$8" FROM (SELECT ( :B4 ) "USERS_ADVISORS_KEY$8", "USER_ADVISOR". "PERSON_ID" "PERSON_ID$13", "USER_ADVISOR". "ADVISOR_PERSON_ID" "ADVISOR_PERSON_ID$13", "INVITE_CLIENTS". "INVITE_CLIENT_ID" "INVITE_CLIENT_ID$11", "USER_ADVISOR". "IS_PRIMARY_ADVISOR" "IS_PRIMARY_ADVISOR$13", ( :B3 ) "SCHEMA_NAME$12", 0 "LOOKUP$$$_1_DUMMY_VALUE$9" FROM ( SELECT "SET_OPERATION$2". "PERSON_ID$14" "PERSON_ID", "SET_OPERATION$2". "ADVISOR_PERSON_ID$14" "ADVISOR_PERSON_ID", "SET_OPERATION$2". "CREATED_ON$2" "CREATED_ON", "SET_OPERATION$2". "IS_PRIMARY_ADVISOR$14" "IS_PRIMARY_ADVISOR", "SET_OPERATION$2". "MOD_TAG$2" "MOD_TAG", "SET_OPERATION$2". "MODIFIED_ON$2" "MODIFIED_ON" FROM (SELECT "PERSON_ID" "PERSON_ID$14", "ADVISOR_PERSON_ID" "ADVISOR_PERSON_ID$14", "CREATED_ON" "CREATED_ON$2", "IS_PRIMARY_ADVISOR" "IS_PRIMARY_ADVISOR$14", "MOD_TAG" "MOD_TAG$2", "MODIFIED_ON" "MODIFIED_ON$2" FROM (SELECT "USERS_ADVISORS". "PERSON_ID" "PERSON_ID", "USERS_ADVISORS". "ADVISOR_PERSON_ID" "ADVISOR_PERSON_ID", "USERS_ADVISORS". "CREATED_ON" "CREATED_ON", "USERS_ADVISORS". "IS_PRIMARY_ADVISOR" "IS_PRIMARY_ADVISOR", "USERS_ADVISORS". "MOD_TAG" "MOD_TAG", "USERS_ADVISORS". "MODIFIED_ON" "MODIFIED_ON" FROM "ADVIEWPROD". "USERS_ADVISORS" "USERS_ADVISORS" UNION SELECT "USERS_ADVISORS_DLOG". "PERSON_ID" "PERSON_ID", "USERS_ADVISORS_DLOG". "ADVISOR_PERSON_ID" "ADVISOR_PERSON_ID", "USERS_ADVISORS_DLOG". "CREATED_ON" "CREATED_ON", "USERS_ADVISORS_DLOG". "IS_PRIMARY_ADVISOR" "IS_PRIMARY_ADVISOR", "USERS_ADVISORS_DLOG". "MOD_TAG" "MOD_TAG", "USERS_ADVISORS_DLOG". "MODIFIED_ON" "MODIFIED_ON" FROM "ADVIEWPROD". "USERS_ADVISORS_DLOG" "USERS_ADVISORS_DLOG") ) "SET_OPERATION$2" ) "USER_ADVISOR" LEFT OUTER JOIN ( SELECT "INVITE_CLIENTS". "ADVISOR_PERSON_ID" "ADVISOR_PERSON_ID", "INVITE_CLIENTS". "PERSON_ID" "PERSON_ID", "INVITE_CLIENTS". "INVITE_CLIENT_ID" "INVITE_CLIENT_ID" FROM "ADVIEWPROD". "INVITE_CLIENTS" "INVITE_CLIENTS" ) "INVITE_CLIENTS" ON ( (( "USER_ADVISOR". "PERSON_ID" = "INVITE_CLIENTS". "PERSON_ID" )) AND (( "USER_ADVISOR". "ADVISOR_PERSON_ID" = "INVITE_CLIENTS". "ADVISOR_PERSON_ID" )) ) WHERE ( ( "USER_ADVISOR". "CREATED_ON" BETWEEN (TO_DATE( ( :B2 ) , 'mm/dd/yyyy hh24:mi:ss') ) AND (TO_DATE( ( :B1 ) , 'mm/dd/yyyy hh24:mi:ss') ) OR "USER_ADVISOR". "MODIFIED_ON" BETWEEN (TO_DATE( ( :B2 ) , 'mm/dd/yyyy hh24:mi:ss') ) AND (TO_DATE( ( :B1 ) , 'mm/dd/yyyy hh24:mi:ss') ) ) ) ) "AGG_INPUT$2" GROUP BY "AGG_INPUT$2". "PERSON_ID$13", "AGG_INPUT$2". "ADVISOR_PERSON_ID$13", "AGG_INPUT$2". "SCHEMA_NAME$12" ) "DEDUP_SRC_0$2" ) "LOOKUP_INPUT_SUBQUERY$5" WHERE ( (NOT ( "LOOKUP_INPUT_SUBQUERY$5". "PERSON_ID$11" IS NULL AND "LOOKUP_INPUT_SUBQUERY$5". "ADVISOR_PERSON_ID$11" IS NULL AND "LOOKUP_INPUT_SUBQUERY$5". "SCHEMA_NAME$10" IS NULL)) ) ) "INGRP1" LEFT OUTER JOIN ( SELECT "DUMMY_LEVEL_0". "DUMMY_LEVEL_KEY" "DUMMY_LEVEL_KEY", "DUMMY_LEVEL_0". "DUMMY_VALUE" "DUMMY_VALUE", "DUMMY_LEVEL_0". "DESCRIPTION" "DESCRIPTION" FROM "WM_USERS_ADVISORS_DIM" "DUMMY_LEVEL_0" WHERE ( "DUMMY_LEVEL_0". "DIMENSION_KEY" = "DUMMY_LEVEL_0". "DUMMY_LEVEL_KEY" ) AND ( "DUMMY_LEVEL_0". "DUMMY_LEVEL_KEY" IS NOT NULL ) ) "INGRP2" ON ( ( "INGRP1". "LOOKUP$$$_1_DUMMY_VALUE" = "INGRP2". "DUMMY_VALUE" ) ) )
Thanks in advance
Meg
Edited by: Meg on Jan 4, 2012 5:33 PMHello,
These wrappers were separated into different templates. What you would need to do is to run the templates that you need. You can find these templates in the C:\Program Files\National Instruments\MATRIXx\mx_71.4\case\ACC\templates folder.
Hope this helps.
Ricardo S.
National Instruments -
Hallo,
ich muss hunderte Visitenkarten erstellen auf denen ein personalisierter QR-Code oben sein soll. Laut Adobe Neuerungen in der CC 2014 InDesign, soll es nun
einen 'Erweiterter QR-Code-Generator' geben mit dem QR Codes automatisch erstellt werden können. Nur wo finde ich den? Help!
Danke!Hallo zusammen!
Ich glaube hier ist die Lösung.
Auto Generate QR Codes with Data Merge in InDesign CC 2014
Hatte nämlich auch das Problem und wusste nicht wie die Spalte für den QR-Code benannt werden musste.
Die Spalte muss so benannt werden "#QRcodes" damit sie erkannt wird.
Habe das ganze aber noch nicht ausprobiert.
Ich hoffe ich konnte euch helfen. -
How do I edit the file created by code generator?
hi all,
I want to modify a java file that is generated when you create the webdynpro, but I can not change.
// This file has been generated partially by the Web Dynpro Code Generator.
// MODIFY CODE ONLY IN SECTIONS ENCLOSED BY @@begin AND @@end.
// ALL OTHER CHANGES WILL BE LOST IF THE FILE IS REGENERATED.
how can I disable the file to modify
thanks!Hi Pablo.
There's no way to modify it, NW2004s and its IDE has a code compilation based in some internal scripts based on eclipse plugin architecture.
In your code you must consider this.
1 - Try to find in your declared methods, importing directives, packages declarations some like this:
// This file has been generated partially by the Web Dynpro Code Generator.
// MODIFY CODE ONLY IN SECTIONS ENCLOSED BY @@begin AND @@end.
// ALL OTHER CHANGES WILL BE LOST IF THE FILE IS REGENERATED.
package com.sap.teste;
// IMPORTANT NOTE:
// ALL IMPORT STATEMENTS MUST BE PLACED IN THE FOLLOWING SECTION ENCLOSED
// BY @@begin imports AND @@end. FURTHERMORE, THIS SECTION MUST ALWAYS CONTAIN
// AT LEAST ONE IMPORT STATEMENT (E.G. THAT FOR IPrivateTesteApp).
// OTHERWISE, USING THE ECLIPSE FUNCTION "Organize Imports" FOLLOWED BY
// A WEB DYNPRO CODE GENERATION (E.G. PROJECT BUILD) WILL RESULT IN THE LOSS
// OF IMPORT STATEMENTS.
//@@begin imports
import com.sap.teste.wdp.IPrivateTesteApp;
import com.sap.myimport.MyClass;
//@@end
//@@begin
//@@end
it means that between begin and end...you can add what you want..and the code will not be removed after class compilation....
//@@begin javadoc:wdDoExit()
/** Hook method called to clean up controller. */
//@@end
public void wdDoExit()
//@@begin wdDoExit()
//@@end
int this case too....if you implement something between //@@begin and //@@end in the method scope...all part of your code will be surely safe. -
What am I missing with this tool? It seems like it is not too useful because you have to go thru and input all the info, that it would be easier just to go thru
Financials -> Chart of Accounts
I am just curious if I am missing some type of functionality.
thank you,
JohnJohn,
The Account Code generator can be useful only if you are creating a fresh CoA with segments. When you are trying to port an existing CoA account ACG might not be the best option.
It is a tool to quickly create a number of active accounts from a combination of different segments.
Suda -
I am trying to place a time code generator on my sequence. It keeps failing. I receive "invalid file error" and "missing plug-ins" messages. What is the real problem and how can it be corrected?
Sorry, I can not duplicate the error. The standard answers would be try trashing your preferences and if that doesn't work, a re-install.
--Bob -
How to use netlist of verilog hdl code in hdl interface node
Hello,
In labview 8.6, hdl node doesnot support verilog. I studied that netlist can be used in hdl interface node. How can I use netlist of verilog hdl code, in hdl interface node.
Please clarify
Thanks
PrashanthCheck out the given link. Similar problem is discussed over there.
http://forums.ni.com/ni/board/message?board.id=170&message.id=253724&requireLogin=False -
Automatic html code generated in {module_case} output
Does anyone know a work around for the automatic spacing and carriage return that BC system generates when the {module_case} is displayed? I have BC form that is transferring this data from BC to a third party site and the extra code being generated :
%0D = Carriage Return
%0A=line feed
Is killing the callback method of the form
Screenshot of how form looks on screen
http://screencast.com/t/aSw3pywL
Screenshot of backend with extra return
http://screencast.com/t/4xfESLGpu
Screenshot of extra code generated
http://screencast.com/t/NmlCxbGgiECIn struts my string pritns like this
var abc = new Array(["A", "B"]);
I pass this string to JSP. and in the outputted html,
all double quotes are replaces by its equivalent ASCII "
:( -
Modify code generated by Form Editor
Hello,
I'm wondering how I can add the methode
setLocationRelativeTo()
to the code generated by the Form Editor in JDeveloper12.
Or what do I have to do, to create a Project with Swing GUI, using a visual editor, which let's me modify the code???
Maybe this is a very odd question, but I'm just a little bit confused. I'm quite sure, that I was able to modify my code using the Visual Editor in JDeveloper10. Or am I on the wrong way and have to write the code by totaly by myself, if I want to have the possibility of modification?
Thanks
chrissyHi Timo,
that's the way I think it should work, but all code for components created with visual GUI Editor is blocked. What also makes sense, because the Form Editor will overwrite it, everytime I change something with the GUI Editor.
My start up was to create a new Application (Java Desktop Application) with a project. I think it is just using NetBeans (with which I have never worked before). Creating now a JFrame Form is using the Form Editor for visual stuff. What's nice to have, because a lot of code is auto-generated, but I also need to do some modifications, like setting the window appear in the middle of the screen with setLocationRelativeTo(). Is there a chance to do it, or do I have to start up another way, i.e. just creating a Custom Application and writing all the code by myself and use no visual editor?
Thanks
chrissy -
What is wrong with the idl code generated by packager.exe?
Hello everybody,
I am trying to figure out what is wrong with the idl code generated by packager.exe. In the evaluation for the bug posted at http://developer.java.sun.com/developer/bugParade/bugs/4964563.html it says that the IDispatch interface is not exposed correctly and thus early binding of java objects is not possible using the current activex bridge implementation.
As I am no idl expert I have no idea what that means. However, I managed to dig out the idl code generated by packager.exe for the following example bean:
package test;
public class MyBean
protected int value;
public MyBean()
public void setMyValue(int _value)
value = _value;
public int getMyValue()
return value;
public MyBean getSelfReference()
return this;
}The corresponding idl code generated by packager.exe is
uuid(81B0BF63-2A55-11D8-A73E-000475EBF021),
version(1.0)
library MyBean
importlib("Stdole2.tlb");
dispinterface MyBeanSource;
dispinterface MyBeanDispatch;
uuid(81B0BF64-2A55-11D8-A73E-000475EBF021),
version(1.0)
dispinterface MyBeanSource {
properties:
methods:
uuid(81B0BF65-2A55-11D8-A73E-000475EBF021),
version(1.0)
dispinterface MyBeanDispatch {
properties:
[id(4097)]
int myValue;
methods:
[id(32768)]
VARIANT_BOOL equals(IDispatch* arg0);
[id(32769)]
IDispatch* getClass();
[id(32770)]
int getMyValue();
[id(32771)]
IDispatch* getSelfReference();
[id(32772)]
int hashCode();
[id(32773)]
void notify();
[id(32774)]
void notifyAll();
[id(32775)]
void setMyValue(int arg0);
[id(32776)]
BSTR toString();
[id(32779)]
VARIANT wait([optional] VARIANT var0, [optional] VARIANT var1);
uuid(81B0BF62-2A55-11D8-A73E-000475EBF021),
version(1.0)
coclass MyBean {
[default, source] dispinterface MyBeanSource;
[default] dispinterface MyBeanDispatch;
};Does anyone know what is wrong with this code and maybe how to fix the idl code? Generating the dll should then be easy (I already tried several variations of the idl code but as my idl knowledge is limited it didn't really do what I wanted).Then the question is why it does work with visual controls (even if you set them to non-visible)?
Maybe you are looking for
-
How to download a file from the web
Say, a PDF.
-
Down Payment Request at Header Level of PO
Dear Friends We want to create Down Payment Request and subsequently the Down Payment at Purchase Order Header Level. We are looking for a standard solution without any Custom Development. While creating a Down Payment Request (F-47) the system does
-
System Data Container in ECATT
I am trying to create some catt scripts in the CUA box (SECATT) when creating a new system data container i am selecting the RFC destination and typing in the Target system and description fields. However - when ever we select the RFC destination the
-
Why won't my apps update?
I don't have wi-fi, but I thought that connecting to a computer via a usb cord, I'd still be able to get my apps to function and/or update, but they don't. I can't figure out what the difference between a wi-fi connection and a direct connection is t
-
I'm trying to see videos on youtube, videos that I can perfectly see on my iPhone or on the tablet, but the seres always says that an error occurred. I've: - updated adoble flash player - tryed on other computers, and it works - checked if I have the