FPM personalization

Hello,
My query is regarding personalization, when the user clicks on the personalization icon on the extreme right hand side (say during the display of the LIST UIBB) and sets the settings for few columns like col A width is changed and col B is hidden and then he/she saves this as a personalization.
next time he loads the LIST UIBB and invokes this particular personalization, I want to read this personalization in my backend code i.e. feeder class        ( during the load event of the UIBB and do some processing based on the personalization values set for those columns).
can you please let me know how to achieve this?
Thanks,
Ravish

HI Ravish,
While Christian is correct. You can check out this detailed document that I wrote for the same to achieve exactly what you are looking for. I you have any question I can answer. Please ask in the blog or here.
ACCESSING THE PERSONALIZATION IN FPM_LIST_UIBB_ATS: An Enhancement
Regards,
Laeeq Siddique

Similar Messages

  • ESS US Addresses - Hide Review Button

    Hello Experts,
    I'm currently working on an ESS DC for BP 1.0 (ERP 2005), specifically the US Addresses webdynpro application (essusaaddr) and my requirement is to show the Edit Screen differently, according to the different Infotype 0006 subtypes available in the Bizcard overview screen.
    I got this done by verifying which is the active subtype and depending on this, I change fields atributes accordingly (e.g. Read Only, Invisible).
    Problem is that for one specific subtype I need to hide the Review and Save button, because this subtype is all read-only. And I cannot find the application's buttons anywhere, so I don't know how to act upon them...
    Bottom line is: where can I find the buttons for the Bizcard view and Edit view for the ESS US Addresses application? Anyone?
    Thanks a lot in advance,
    Antonio Caldas

    Hi Guys,
    Thanks for your replies.
    I'm sorry but I think I wasn't clear enough. The question is not hiding a button or label using the FPM personalization features. The question is that for the US Addr application, only one Edit view is provided, ao all subtypes existing in the Overview Screen point to it. The result is that if I hide the "Review" button in the Edit view, this will apply for all subtypes. And my requirement was only to hide the Review button for 2 specific subtypes.
    So the only way I managed to solve this by modifying the standard us~addr webdynpro application, using code logic.
    Thanks again for your replies,
    Antonio

  • FPM GAF: Personalization on skipping steps

    I have a GAF Application with 3 steps. Everytime I leave a step to an other step the data of this step are checked and saved. I set standardvalues for some fields over the personalization. Now I jump from step 1 to step 3 and skipping step 2. On skipping step 2 the data from step 2 are checked and saved, but the standardvalues of the personalization are not set. Is it possible to set the standardvalues from the personalization if i skipped a step.

    Hi Ankur,
    Did you find any solution for this issue?
    We are facing the same problem. Values in table seems to be properly maintained, when we go to configuration, the different steps for GAF are translated but when we run the application, it doesn't show the (new) translated texts.
    Thanks a lot,
    kr,
    Agustín Figueredo.

  • Capture screen positions on click of a button in FPM toolbar

    Hi Uve,
    Currently in visual business if i right click on any map stack i will get the option for personalization and to set the screen position per user.
    But my requirement is I have to set screen positions for multiple rail yards per user.So on click of a save button in fpm i require tje current screen positions so that i could save it and pass it during initialization of VB for that yard next time.
    But what i notice is only when we right click on a map stack the exact screen position details are fired to backend,But when we right click on spot or links screen positions details like zoom factor, change of perception values etc are not passed.
    Could you suggest a solution to get screen position from VB on an external FPM event.
    Thanks
    Siju

    Hello Siju,
    I am afraid this is a limitation of the current backend of Visual Business. Technically the camera value can be retrieved with every event fired by the control. But in your case there are two issues right now:
    1. There is no event raised by the VB control when you press an FPM button
    2. Even if there would be an event, the camera data needs to be requested with the event registration. This registration is fix for the backend API, and the data comes only with the right click on the map/scene.
    However, there is a chance to get this done! If you check impl of method IF_VBI_CONTROL_ADAPTER~CHECK_DATA_CHANGED of class CL_VBI_CONTROL_ADAPTER you see how to trigger an arbitrary event of the control from the backend. You can derive your own control adapter from our base class and add an own method triggering event "7" instead of "GenDummy". This should lead to a context menu request including the current camera values.
    Good luck,
    Uwe

  • Need expertice opinion on WebDynpro ABAP vs FPM for heavy custom apps

    Hi Experts,
    I have a lot of custom UI development,.for external users in SAP. Most of these applications can be simply developed using WebDynpro ABAP framework. If I do the same development using FPM framework I may need to do lot of reaseach espcially controling the UI behaviours like hiding, changing table cell  colors based on the data, manipulating the UI behavior in the runtime, lot more like this.
    The question I have is , which one is the right tool for my development FPM vs WebDynpro ABAP, what is the value in building the same apps in FPM rather then WebDynpro ABAP? If I develop these apps in WebDynpro ABAP does my client loose any new capabilities in he future releases? are any other drawbacks?
    The challenge i see the FPM Feeder classses doesnt have lot of interfaces other then few like ( IF_FPM_GUIBB_FORM, IF_FPM_GUIBB_FORM_REPEATER,IF_FPM_GUIBB_LIST,IF_FPM_GUIBB_SEARCH,IF_FPM_GUIBB_TREE,IF_FPM_GUIBB_LAUNCHPAD )
    to extend more custom UI functionalities, and the other thing I may need to invest lot of time in reseacrhing and analysing the framework events etc....Please can you shed some light on it and put me in right direction.
    Appreciate your time and help.
    Thanks
    Krishna

    Hello Krishna,
    the whole story revolves around reusability and abstraction, extensibility atleast in this context.
    FPM offers more abstraction than Webdynpro. i am sure we all appreciate the standard webdynpro components for ALV, Value help, as this is something we could reuse and if we build our components that it manipulates itself with the help of configuration, customization and personalization.
    So all the Standard SAP Dev could be enhanced (not modified) by simple, configuration, FPM is built around this concept.
    So if you want to do custom development, which could be extended for your different customers with minimal efforts, you could go for FPM.
    So here are some takeaways
    1) FPM offers more abstraction than Webdynpro
    2) FPM offers more reusability
    3) Say manipulating the UI behaviour and say some customers wants view1 first and other doesnt want view 1 and wants only view 2. so in FPM you could simply do it with different configuration. and with Webdynpro, you need to manage this dynamically based on certain application parameter or you may end up copying certain comp,,or you use different usage,,,,and you could calibrate this.
    Regarding limitation with FPM interfaces, could you explictly share what custom development you intend to do and in worst cases, you could always use freestyle UIBB,, which is webdynpro abap
    in that scenario, atleast wiring, application config(app parameter, combination of webdynpro, with thier respective config),,could be reused.
    Regards
    Anurag Chopra

  • Report personalization issue..

    Hi Experts,
    We have published our few reports which are orignially created in Query designer in our BW portal using the WAD iviews. We have a issue that when we choose "Personalize Web application"  for a report then same reports opens up every time even if we choose to open different report.
    Can any one please suggest why it is happening!
    Thanks
    VV

    Please see below link if you need to remove the personilsation:
    Page not displaying iviews
    It works on the same priciple as your issue.
    Thanks,
    Em

  • Application specific button on FPM toolbar to call action triggered in view

    Hello,
    In the content area of my FPM is an ALV with some buttons, e.g. clicking one of the button opens up certain ALV column for editing (for simplicity, I omit the details besides simply enable the columns).
    With FPM, I want the button to be placed in the toolbar as a application specific button. How do I achieve the same functionality e.g. from PROCESS_EVENT method calling an action (to open up certain ALV column for editing) via the application specific button placed on the toolbar communicating with the action/method found in the view controller ? Thank you.
    Regards
    Kir Chern

    Hi Arvind,
    I tried as follows :
    - Create an event in the component controller, say 'MA'
    - Within PROCESS_EVENT, raise the event as follows :
      data : lo_fpm type ref to if_fpm,
             lo_event type ref to cl_fpm_event.
      create object lo_event
         exporting
            iv_event_id = 'MA'.
       lo_fpm = cl_fpm_factory=>get_instance( ).
       lo_fpm->raise_event( io_event = lo_event ).
    - In the view controller, create an event handler which subscribe to the event, MA of the component controller.
    However, the code in the event handler is never executed despite the event being raised. Not sure how FPM event flow works here.
    Can anyone advise ? Thank you.
    Regards
    Kir Chern

  • How to find the user who did the personalization?

    Hi All,
    Is there a way to find out which user has done personalizations in a given OA page? For e.g. if a user has done personalization for hiding a text bean in a page, I want to find out that user's name by passing the page name to a script?
    Even if not possible through script, if there is any other way to achieve this, please let me know.
    Regards,
    Pradeep

    I dont think it is possible. The LAST_UPDATED_BY column in JDR_PATHS is always set to INTERNAL.
    Thanks
    Pradeep

  • In Design CS2 won't accept serial number during "Personalization" In Design

    Re: InDesignCS2 rejects the serial number provided for CS2 special "no-activation" versions.
    I am having an identical set of issues as outlined in the above discussion but I am using Windows 7.
    My hard disk died and I am simply trying to get back up to speed with the new one. I have Creative Suite 2 Premium.  Following the special instructions for moving certain files so that I wouldn't have the Insert Disk 2 problems I managed to get PhotoShop actuvated and running. However, I am unable to "personalize" InDesign because the system does not like the serial number.  I have tried the one that came on the original box and the one that was on the link I used to download the programs. Both with and without the hyphens.
    I have also been unable to uninstall InDesign and start over as the wizard was interrupted just as it was described above.
    I have followed the instructions on the link you provided to manually remove CS2:  Manually remove Adobe Creative Suite 2.x | Windows  Including attempting to uninstall Creative Suite.  However, Adobe InDesign CS2, Adobe Illustrator CS2, and Adobe SVG Viewer 3 still appear in the list of programs and for some reason cannot be uninstalled using the control panel.
    In looking at the files that are still on the computer I see a folder C:\Creative Suite CS2. It has folders in it for PhotoShop, Illustrator, and Version Cue plus some other stuff. I was able to delete each of the files individually. but when I attempt to delete Illustrator, I get an error message saying  that it can't be deleted  because a folder or file is open in another application. When I attempt to uninstall that one using the control panel I get a message saying the remover was interrupted before it could finish.
    I haven't even gotten to the part of the instructions where you remove things from the registry!
    Any thoughts on where to go from here?
    Thanks,
    E.

    You need to see the following for CS2 installation:
    Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3 -
    http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l

  • Refresh of FPM SEARCH Component  from Program

    Hi ABAPers,
    I am facing a problem with the Search UIBB (IF_FPM_GUIBB_SEARCH). The selection works fine: I can select the lead-selection, and the result is correctly provided to another UIBB.
    Within this second UIBB the data may be changed. In this case, I would like to update my search result with the new data (simply to be read from the database). This unfortunately does not work.
    My controller (the feeder class) gets all things set, but the view (Webdynpro) is not being refreshed (unless I click the buttons on the screen). After my data is changed, I fire these two events
    lo_fpm->raise_event_by_id( if_fpm_guibb_search=>fpm_reset_search ).
    lo_fpm->raise_event_by_id( if_fpm_guibb_search=>fpm_execute_search ).
    which are properly processed. In IF_FPM_GUIBB_SEARCH~GET_DATA I also set
    ev_search_criteria_changed = abap_true.
    As I said, when changing the search critera and pressing the buttons on the screen, all things work fine - so the coding should be fine basically. But when I fire the events manually through my program code to initiate the same thing, nothing happens on the screen.
    Is there any flag to be set to get to get the interaction between controller und view running?
    Any help is appreciated!
    Kind regards
    Torsten

    Hi Torsten,
    so the problem is that the result data is not updated? The result data is propably displayed in a FPM List UIBB and has its own feeder class. Therefore I got start for analyzing this, would be to figure out the feeder class of that result list uibb. Then I would debug what happens in method get_data. The interesting parameters are ct_data and ev_data_changed.
    Kind regards,
    Ulrich

  • Unable to see the personalization link on any page

    Hi,
    I am unable to see the personalization link on any of my pages (not even on login page).
    I am setting the profile option value to "Yes" for the profile option
    FND: Personalization Region Link Enabled
    Also I have bounced the Apache.
    Please help me as I am stuck due to this.
    Thanks,
    Anoop

    Did you enabled the profile option Personalize Self-Service Defn (FND_CUSTOM_OA_DEFINTION) .It must be set to Yes.
    Abhay

  • Capture FPM Event in another WDC

    Hello Friends,
    I trying to capture the name of event liek EDIT,CLOSE,NEXT etc.. that are defined in FPM in a std WDC.
    I need this because based on the ID of the button , i need to process some information.
    Could you pls let me know how to handle this or any code would be fine. ?
    Regards,
    Vinay

    Hello Jens..
    I am not trying to go into EDIT mode in std..WDC delivered by SAP .. but thru enh implementation..
    I do have dev authorization.
    The interface IF_FPM_UI_BUILDING_BLOCK  is already implemented in  WDC
    What I did was..
    In the component controller methods.. the method... PROCESS_EVENT  is not in EDIT mode..
    But i wrote  i wrote the code for capturing the instance of the FPM event in the post-exit of that method..
    When i tested this in portal.. this code not executed and hence unable to caputre the event.
    Is the design approach correct ? or is there another way
    Many thanks..
    Regards,
    Vinay
    Edited by: Vinay Reddy on Feb 6, 2012 12:12 PM
    Edited by: Vinay Reddy on Feb 6, 2012 12:24 PM

  • Nginx + php-fpm problem

    Hello there.
    I just setup nginx with mysql and php-fpm to my archlinux install and i need help.
    i checked all over internet and try every solution, none still work.
    i have a blank page problem
    this is working correctly:
    <?php
    phpinfo();
    ?>
    short tags are enabled and php short tags are also working.
    i try to install phpbb, the install page load, once the install done.. blank page.
    i tryed a working backup of phpbb from my old server.. blank page, same with my phpnuke backup, blank page.
    i tryed chown to root:root and http:http, and chmod rwx for group user and other, i dont think it is a permission problem.
    Probably a little stupid error on my end but i can't find it, i tryed everything.
    my nginx.cong
    #user html;
    worker_processes 1;
    #error_log logs/error.log;
    #error_log logs/error.log notice;
    #error_log logs/error.log info;
    #pid logs/nginx.pid;
    events {
    worker_connections 1024;
    http {
    include mime.types;
    default_type application/octet-stream;
    #log_format main '$remote_addr - $remote_user [$time_local] "$request" '
    # '$status $body_bytes_sent "$http_referer" '
    # '"$http_user_agent" "$http_x_forwarded_for"';
    #access_log logs/access.log main;
    sendfile on;
    #tcp_nopush on;
    #keepalive_timeout 0;
    keepalive_timeout 65;
    #gzip on;
    server {
    listen 80;
    server_name localhost;
    #charset koi8-r;
    #access_log logs/host.access.log main;
    location / {
    root /usr/share/nginx/html;
    index index.html index.htm;
    #error_page 404 /404.html;
    # redirect server error pages to the static page /50x.html
    error_page 500 502 503 504 /50x.html;
    location = /50x.html {
    root /usr/share/nginx/html;
    # proxy the PHP scripts to Apache listening on 127.0.0.1:80
    #location ~ \.php$ {
    # proxy_pass http://127.0.0.1;
    # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
    #location ~ \.php$ {
    # root html;
    # fastcgi_pass unix:/var/run/php-fpm/php-fpm.sock;
    # fastcgi_index index.php;
    # fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
    # include fastcgi_params;
    # deny access to .htaccess files, if Apache's document root
    # concurs with nginx's one
    #location ~ /\.ht {
    # deny all;
    # another virtual host using mix of IP-, name-, and port-based configuration
    #server {
    # listen 8000;
    # listen somename:8080;
    # server_name somename alias another.alias;
    # location / {
    # root html;
    # index index.html index.htm;
    server {
    listen 80;
    listen clan-ws.net:80;
    server_name clan-ws.net www.clan-ws.net;
    autoindex on;
    root /srv/http/;
    index index.html index.htm index.php;
    location ~ \.php$ {
    #fastcgi_pass 127.0.0.1:9000;
    fastcgi_pass unix:/var/run/php-fpm/php-fpm.sock;
    fastcgi_index index.php;
    # include fastcgi.conf;
    include fastcgi_params;
    # include /etc/nginx/fastcgi_params;
    # HTTPS server
    #server {
    # listen 443;
    # server_name localhost;
    # ssl on;
    # ssl_certificate cert.pem;
    # ssl_certificate_key cert.key;
    # ssl_session_timeout 5m;
    # ssl_protocols SSLv2 SSLv3 TLSv1;
    # ssl_ciphers HIGH:!aNULL:!MD5;
    # ssl_prefer_server_ciphers on;
    # location / {
    # root html;
    # index index.html index.htm;
    php-fpm.conf
    ; FPM Configuration ;
    ; All relative paths in this configuration file are relative to PHP's install
    ; prefix (/usr). This prefix can be dynamicaly changed by using the
    ; '-p' argument from the command line.
    ; Include one or more files. If glob(3) exists, it is used to include a bunch of
    ; files from a glob(3) pattern. This directive can be used everywhere in the
    ; file.
    ; Relative path can also be used. They will be prefixed by:
    ; - the global prefix if it's been set (-p arguement)
    ; - /usr otherwise
    ;include=/etc/php/fpm.d/*.conf
    ; Global Options ;
    [global]
    ; Pid file
    ; Note: the default prefix is /var
    ; Default Value: none
    pid = /run/php-fpm/php-fpm.pid
    ; Error log file
    ; If it's set to "syslog", log is sent to syslogd instead of being written
    ; in a local file.
    ; Note: the default prefix is /var
    ; Default Value: log/php-fpm.log
    ;error_log = log/php-fpm.log
    ; syslog_facility is used to specify what type of program is logging the
    ; message. This lets syslogd specify that messages from different facilities
    ; will be handled differently.
    ; See syslog(3) for possible values (ex daemon equiv LOG_DAEMON)
    ; Default Value: daemon
    ;syslog.facility = daemon
    ; syslog_ident is prepended to every message. If you have multiple FPM
    ; instances running on the same server, you can change the default value
    ; which must suit common needs.
    ; Default Value: php-fpm
    ;syslog.ident = php-fpm
    ; Log level
    ; Possible Values: alert, error, warning, notice, debug
    ; Default Value: notice
    ;log_level = notice
    ; If this number of child processes exit with SIGSEGV or SIGBUS within the time
    ; interval set by emergency_restart_interval then FPM will restart. A value
    ; of '0' means 'Off'.
    ; Default Value: 0
    ;emergency_restart_threshold = 0
    ; Interval of time used by emergency_restart_interval to determine when
    ; a graceful restart will be initiated. This can be useful to work around
    ; accidental corruptions in an accelerator's shared memory.
    ; Available Units: s(econds), m(inutes), h(ours), or d(ays)
    ; Default Unit: seconds
    ; Default Value: 0
    ;emergency_restart_interval = 0
    ; Time limit for child processes to wait for a reaction on signals from master.
    ; Available units: s(econds), m(inutes), h(ours), or d(ays)
    ; Default Unit: seconds
    ; Default Value: 0
    ;process_control_timeout = 0
    ; The maximum number of processes FPM will fork. This has been design to control
    ; the global number of processes when using dynamic PM within a lot of pools.
    ; Use it with caution.
    ; Note: A value of 0 indicates no limit
    ; Default Value: 0
    ; process.max = 128
    ; Specify the nice(2) priority to apply to the master process (only if set)
    ; The value can vary from -19 (highest priority) to 20 (lower priority)
    ; Note: - It will only work if the FPM master process is launched as root
    ; - The pool process will inherit the master process priority
    ; unless it specified otherwise
    ; Default Value: no set
    ; process.priority = -19
    ; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging.
    ; Default Value: yes
    ;daemonize = yes
    ; Set open file descriptor rlimit for the master process.
    ; Default Value: system defined value
    ;rlimit_files = 1024
    ; Set max core size rlimit for the master process.
    ; Possible Values: 'unlimited' or an integer greater or equal to 0
    ; Default Value: system defined value
    ;rlimit_core = 0
    ; Specify the event mechanism FPM will use. The following is available:
    ; - select (any POSIX os)
    ; - poll (any POSIX os)
    ; - epoll (linux >= 2.5.44)
    ; - kqueue (FreeBSD >= 4.1, OpenBSD >= 2.9, NetBSD >= 2.0)
    ; - /dev/poll (Solaris >= 7)
    ; - port (Solaris >= 10)
    ; Default Value: not set (auto detection)
    ;events.mechanism = epoll
    ; When FPM is build with systemd integration, specify the interval,
    ; in second, between health report notification to systemd.
    ; Set to 0 to disable.
    ; Available Units: s(econds), m(inutes), h(ours)
    ; Default Unit: seconds
    ; Default value: 10
    ;systemd_interval = 10
    ; Pool Definitions ;
    ; Multiple pools of child processes may be started with different listening
    ; ports and different management options. The name of the pool will be
    ; used in logs and stats. There is no limitation on the number of pools which
    ; FPM can handle. Your system will tell you anyway :)
    ; Start a new pool named 'www'.
    ; the variable $pool can we used in any directive and will be replaced by the
    ; pool name ('www' here)
    [www]
    ; Per pool prefix
    ; It only applies on the following directives:
    ; - 'slowlog'
    ; - 'listen' (unixsocket)
    ; - 'chroot'
    ; - 'chdir'
    ; - 'php_values'
    ; - 'php_admin_values'
    ; When not set, the global prefix (or /usr) applies instead.
    ; Note: This directive can also be relative to the global prefix.
    ; Default Value: none
    ;prefix = /path/to/pools/$pool
    ; Unix user/group of processes
    ; Note: The user is mandatory. If the group is not set, the default user's group
    ; will be used.
    user = http
    group = http
    ; The address on which to accept FastCGI requests.
    ; Valid syntaxes are:
    ; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific address on
    ; a specific port;
    ; 'port' - to listen on a TCP socket to all addresses on a
    ; specific port;
    ; '/path/to/unix/socket' - to listen on a unix socket.
    ; Note: This value is mandatory.
    ;listen = 127.0.0.1:9000
    listen = /run/php-fpm/php-fpm.sock
    ; Set listen(2) backlog.
    ; Default Value: 128 (-1 on FreeBSD and OpenBSD)
    ;listen.backlog = 128
    ; Set permissions for unix socket, if one is used. In Linux, read/write
    ; permissions must be set in order to allow connections from a web server. Many
    ; BSD-derived systems allow connections regardless of permissions.
    ; Default Values: user and group are set as the running user
    ; mode is set to 0666
    listen.owner = http
    listen.group = http
    listen.mode = 0660
    ; List of ipv4 addresses of FastCGI clients which are allowed to connect.
    ; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
    ; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
    ; must be separated by a comma. If this value is left blank, connections will be
    ; accepted from any ip address.
    ; Default Value: any
    ;listen.allowed_clients = 127.0.0.1
    ; Specify the nice(2) priority to apply to the pool processes (only if set)
    ; The value can vary from -19 (highest priority) to 20 (lower priority)
    ; Note: - It will only work if the FPM master process is launched as root
    ; - The pool processes will inherit the master process priority
    ; unless it specified otherwise
    ; Default Value: no set
    ; priority = -19
    ; Choose how the process manager will control the number of child processes.
    ; Possible Values:
    ; static - a fixed number (pm.max_children) of child processes;
    ; dynamic - the number of child processes are set dynamically based on the
    ; following directives. With this process management, there will be
    ; always at least 1 children.
    ; pm.max_children - the maximum number of children that can
    ; be alive at the same time.
    ; pm.start_servers - the number of children created on startup.
    ; pm.min_spare_servers - the minimum number of children in 'idle'
    ; state (waiting to process). If the number
    ; of 'idle' processes is less than this
    ; number then some children will be created.
    ; pm.max_spare_servers - the maximum number of children in 'idle'
    ; state (waiting to process). If the number
    ; of 'idle' processes is greater than this
    ; number then some children will be killed.
    ; ondemand - no children are created at startup. Children will be forked when
    ; new requests will connect. The following parameter are used:
    ; pm.max_children - the maximum number of children that
    ; can be alive at the same time.
    ; pm.process_idle_timeout - The number of seconds after which
    ; an idle process will be killed.
    ; Note: This value is mandatory.
    pm = dynamic
    ; The number of child processes to be created when pm is set to 'static' and the
    ; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
    ; This value sets the limit on the number of simultaneous requests that will be
    ; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
    ; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
    ; CGI. The below defaults are based on a server without much resources. Don't
    ; forget to tweak pm.* to fit your needs.
    ; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
    ; Note: This value is mandatory.
    pm.max_children = 5
    ; The number of child processes created on startup.
    ; Note: Used only when pm is set to 'dynamic'
    ; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
    pm.start_servers = 2
    ; The desired minimum number of idle server processes.
    ; Note: Used only when pm is set to 'dynamic'
    ; Note: Mandatory when pm is set to 'dynamic'
    pm.min_spare_servers = 1
    ; The desired maximum number of idle server processes.
    ; Note: Used only when pm is set to 'dynamic'
    ; Note: Mandatory when pm is set to 'dynamic'
    pm.max_spare_servers = 3
    ; The number of seconds after which an idle process will be killed.
    ; Note: Used only when pm is set to 'ondemand'
    ; Default Value: 10s
    ;pm.process_idle_timeout = 10s;
    ; The number of requests each child process should execute before respawning.
    ; This can be useful to work around memory leaks in 3rd party libraries. For
    ; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
    ; Default Value: 0
    ;pm.max_requests = 500
    ; The URI to view the FPM status page. If this value is not set, no URI will be
    ; recognized as a status page. It shows the following informations:
    ; pool - the name of the pool;
    ; process manager - static, dynamic or ondemand;
    ; start time - the date and time FPM has started;
    ; start since - number of seconds since FPM has started;
    ; accepted conn - the number of request accepted by the pool;
    ; listen queue - the number of request in the queue of pending
    ; connections (see backlog in listen(2));
    ; max listen queue - the maximum number of requests in the queue
    ; of pending connections since FPM has started;
    ; listen queue len - the size of the socket queue of pending connections;
    ; idle processes - the number of idle processes;
    ; active processes - the number of active processes;
    ; total processes - the number of idle + active processes;
    ; max active processes - the maximum number of active processes since FPM
    ; has started;
    ; max children reached - number of times, the process limit has been reached,
    ; when pm tries to start more children (works only for
    ; pm 'dynamic' and 'ondemand');
    ; Value are updated in real time.
    ; Example output:
    ; pool: www
    ; process manager: static
    ; start time: 01/Jul/2011:17:53:49 +0200
    ; start since: 62636
    ; accepted conn: 190460
    ; listen queue: 0
    ; max listen queue: 1
    ; listen queue len: 42
    ; idle processes: 4
    ; active processes: 11
    ; total processes: 15
    ; max active processes: 12
    ; max children reached: 0
    ; By default the status page output is formatted as text/plain. Passing either
    ; 'html', 'xml' or 'json' in the query string will return the corresponding
    ; output syntax. Example:
    ; http://www.foo.bar/status
    ; http://www.foo.bar/status?json
    ; http://www.foo.bar/status?html
    ; http://www.foo.bar/status?xml
    ; By default the status page only outputs short status. Passing 'full' in the
    ; query string will also return status for each pool process.
    ; Example:
    ; http://www.foo.bar/status?full
    ; http://www.foo.bar/status?json&full
    ; http://www.foo.bar/status?html&full
    ; http://www.foo.bar/status?xml&full
    ; The Full status returns for each process:
    ; pid - the PID of the process;
    ; state - the state of the process (Idle, Running, ...);
    ; start time - the date and time the process has started;
    ; start since - the number of seconds since the process has started;
    ; requests - the number of requests the process has served;
    ; request duration - the duration in µs of the requests;
    ; request method - the request method (GET, POST, ...);
    ; request URI - the request URI with the query string;
    ; content length - the content length of the request (only with POST);
    ; user - the user (PHP_AUTH_USER) (or '-' if not set);
    ; script - the main script called (or '-' if not set);
    ; last request cpu - the %cpu the last request consumed
    ; it's always 0 if the process is not in Idle state
    ; because CPU calculation is done when the request
    ; processing has terminated;
    ; last request memory - the max amount of memory the last request consumed
    ; it's always 0 if the process is not in Idle state
    ; because memory calculation is done when the request
    ; processing has terminated;
    ; If the process is in Idle state, then informations are related to the
    ; last request the process has served. Otherwise informations are related to
    ; the current request being served.
    ; Example output:
    ; pid: 31330
    ; state: Running
    ; start time: 01/Jul/2011:17:53:49 +0200
    ; start since: 63087
    ; requests: 12808
    ; request duration: 1250261
    ; request method: GET
    ; request URI: /test_mem.php?N=10000
    ; content length: 0
    ; user: -
    ; script: /home/fat/web/docs/php/test_mem.php
    ; last request cpu: 0.00
    ; last request memory: 0
    ; Note: There is a real-time FPM status monitoring sample web page available
    ; It's available in: ${prefix}/share/fpm/status.html
    ; Note: The value must start with a leading slash (/). The value can be
    ; anything, but it may not be a good idea to use the .php extension or it
    ; may conflict with a real PHP file.
    ; Default Value: not set
    ;pm.status_path = /status
    ; The ping URI to call the monitoring page of FPM. If this value is not set, no
    ; URI will be recognized as a ping page. This could be used to test from outside
    ; that FPM is alive and responding, or to
    ; - create a graph of FPM availability (rrd or such);
    ; - remove a server from a group if it is not responding (load balancing);
    ; - trigger alerts for the operating team (24/7).
    ; Note: The value must start with a leading slash (/). The value can be
    ; anything, but it may not be a good idea to use the .php extension or it
    ; may conflict with a real PHP file.
    ; Default Value: not set
    ;ping.path = /ping
    ; This directive may be used to customize the response of a ping request. The
    ; response is formatted as text/plain with a 200 response code.
    ; Default Value: pong
    ;ping.response = pong
    ; The access log file
    ; Default: not set
    ;access.log = log/$pool.access.log
    ; The access log format.
    ; The following syntax is allowed
    ; %%: the '%' character
    ; %C: %CPU used by the request
    ; it can accept the following format:
    ; - %{user}C for user CPU only
    ; - %{system}C for system CPU only
    ; - %{total}C for user + system CPU (default)
    ; %d: time taken to serve the request
    ; it can accept the following format:
    ; - %{seconds}d (default)
    ; - %{miliseconds}d
    ; - %{mili}d
    ; - %{microseconds}d
    ; - %{micro}d
    ; %e: an environment variable (same as $_ENV or $_SERVER)
    ; it must be associated with embraces to specify the name of the env
    ; variable. Some exemples:
    ; - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
    ; - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
    ; %f: script filename
    ; %l: content-length of the request (for POST request only)
    ; %m: request method
    ; %M: peak of memory allocated by PHP
    ; it can accept the following format:
    ; - %{bytes}M (default)
    ; - %{kilobytes}M
    ; - %{kilo}M
    ; - %{megabytes}M
    ; - %{mega}M
    ; %n: pool name
    ; %o: ouput header
    ; it must be associated with embraces to specify the name of the header:
    ; - %{Content-Type}o
    ; - %{X-Powered-By}o
    ; - %{Transfert-Encoding}o
    ; %p: PID of the child that serviced the request
    ; %P: PID of the parent of the child that serviced the request
    ; %q: the query string
    ; %Q: the '?' character if query string exists
    ; %r: the request URI (without the query string, see %q and %Q)
    ; %R: remote IP address
    ; %s: status (response code)
    ; %t: server time the request was received
    ; it can accept a strftime(3) format:
    ; %d/%b/%Y:%H:%M:%S %z (default)
    ; %T: time the log has been written (the request has finished)
    ; it can accept a strftime(3) format:
    ; %d/%b/%Y:%H:%M:%S %z (default)
    ; %u: remote user
    ; Default: "%R - %u %t \"%m %r\" %s"
    ;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%"
    ; The log file for slow requests
    ; Default Value: not set
    ; Note: slowlog is mandatory if request_slowlog_timeout is set
    ;slowlog = log/$pool.log.slow
    ; The timeout for serving a single request after which a PHP backtrace will be
    ; dumped to the 'slowlog' file. A value of '0s' means 'off'.
    ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
    ; Default Value: 0
    ;request_slowlog_timeout = 0
    ; The timeout for serving a single request after which the worker process will
    ; be killed. This option should be used when the 'max_execution_time' ini option
    ; does not stop script execution for some reason. A value of '0' means 'off'.
    ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
    ; Default Value: 0
    ;request_terminate_timeout = 0
    ; Set open file descriptor rlimit.
    ; Default Value: system defined value
    ;rlimit_files = 1024
    ; Set max core size rlimit.
    ; Possible Values: 'unlimited' or an integer greater or equal to 0
    ; Default Value: system defined value
    ;rlimit_core = 0
    ; Chroot to this directory at the start. This value must be defined as an
    ; absolute path. When this value is not set, chroot is not used.
    ; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
    ; of its subdirectories. If the pool prefix is not set, the global prefix
    ; will be used instead.
    ; Note: chrooting is a great security feature and should be used whenever
    ; possible. However, all PHP paths will be relative to the chroot
    ; (error_log, sessions.save_path, ...).
    ; Default Value: not set
    ;chroot =
    ; Chdir to this directory at the start.
    ; Note: relative path can be used.
    ; Default Value: current directory or / when chroot
    ;chdir = /srv/http
    ; Redirect worker stdout and stderr into main error log. If not set, stdout and
    ; stderr will be redirected to /dev/null according to FastCGI specs.
    ; Note: on highloaded environement, this can cause some delay in the page
    ; process time (several ms).
    ; Default Value: no
    ;catch_workers_output = yes
    ; Limits the extensions of the main script FPM will allow to parse. This can
    ; prevent configuration mistakes on the web server side. You should only limit
    ; FPM to .php extensions to prevent malicious users to use other extensions to
    ; exectute php code.
    ; Note: set an empty value to allow all extensions.
    ; Default Value: .php
    ;security.limit_extensions = .php .php3 .php4 .php5
    ; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
    ; the current environment.
    ; Default Value: clean env
    ;env[HOSTNAME] = $HOSTNAME
    ;env[PATH] = /usr/local/bin:/usr/bin:/bin
    ;env[TMP] = /tmp
    ;env[TMPDIR] = /tmp
    ;env[TEMP] = /tmp
    ; Additional php.ini defines, specific to this pool of workers. These settings
    ; overwrite the values previously defined in the php.ini. The directives are the
    ; same as the PHP SAPI:
    ; php_value/php_flag - you can set classic ini defines which can
    ; be overwritten from PHP call 'ini_set'.
    ; php_admin_value/php_admin_flag - these directives won't be overwritten by
    ; PHP call 'ini_set'
    ; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
    ; Defining 'extension' will load the corresponding shared extension from
    ; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
    ; overwrite previously defined php.ini values, but will append the new value
    ; instead.
    ; Note: path INI options can be relative and will be expanded with the prefix
    ; (pool, global or /usr)
    ; Default Value: nothing is defined by default except the values in php.ini and
    ; specified at startup with the -d argument
    ;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f [email protected]
    ;php_flag[display_errors] = off
    ;php_admin_value[error_log] = /var/log/fpm-php.www.log
    ;php_admin_flag[log_errors] = on
    ;php_admin_value[memory_limit] = 32M
    php.ini
    [PHP]
    ; About php.ini ;
    ; PHP's initialization file, generally called php.ini, is responsible for
    ; configuring many of the aspects of PHP's behavior.
    ; PHP attempts to find and load this configuration from a number of locations.
    ; The following is a summary of its search order:
    ; 1. SAPI module specific location.
    ; 2. The PHPRC environment variable. (As of PHP 5.2.0)
    ; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
    ; 4. Current working directory (except CLI)
    ; 5. The web server's directory (for SAPI modules), or directory of PHP
    ; (otherwise in Windows)
    ; 6. The directory from the --with-config-file-path compile time option, or the
    ; Windows directory (C:\windows or C:\winnt)
    ; See the PHP docs for more specific information.
    ; http://php.net/configuration.file
    ; The syntax of the file is extremely simple. Whitespace and lines
    ; beginning with a semicolon are silently ignored (as you probably guessed).
    ; Section headers (e.g. [Foo]) are also silently ignored, even though
    ; they might mean something in the future.
    ; Directives following the section heading [PATH=/www/mysite] only
    ; apply to PHP files in the /www/mysite directory. Directives
    ; following the section heading [HOST=www.example.com] only apply to
    ; PHP files served from www.example.com. Directives set in these
    ; special sections cannot be overridden by user-defined INI files or
    ; at runtime. Currently, [PATH=] and [HOST=] sections only work under
    ; CGI/FastCGI.
    ; http://php.net/ini.sections
    ; Directives are specified using the following syntax:
    ; directive = value
    ; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
    ; Directives are variables used to configure PHP or PHP extensions.
    ; There is no name validation. If PHP can't find an expected
    ; directive because it is not set or is mistyped, a default value will be used.
    ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
    ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
    ; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
    ; previously set variable or directive (e.g. ${foo})
    ; Expressions in the INI file are limited to bitwise operators and parentheses:
    ; | bitwise OR
    ; ^ bitwise XOR
    ; & bitwise AND
    ; ~ bitwise NOT
    ; ! boolean NOT
    ; Boolean flags can be turned on using the values 1, On, True or Yes.
    ; They can be turned off using the values 0, Off, False or No.
    ; An empty string can be denoted by simply not writing anything after the equal
    ; sign, or by using the None keyword:
    ; foo = ; sets foo to an empty string
    ; foo = None ; sets foo to an empty string
    ; foo = "None" ; sets foo to the string 'None'
    ; If you use constants in your value, and these constants belong to a
    ; dynamically loaded extension (either a PHP extension or a Zend extension),
    ; you may only use these constants *after* the line that loads the extension.
    ; About this file ;
    ; PHP comes packaged with two INI files. One that is recommended to be used
    ; in production environments and one that is recommended to be used in
    ; development environments.
    ; php.ini-production contains settings which hold security, performance and
    ; best practices at its core. But please be aware, these settings may break
    ; compatibility with older or less security conscience applications. We
    ; recommending using the production ini in production and testing environments.
    ; php.ini-development is very similar to its production variant, except it's
    ; much more verbose when it comes to errors. We recommending using the
    ; development version only in development environments as errors shown to
    ; application users can inadvertently leak otherwise secure information.
    ; Quick Reference ;
    ; The following are all the settings which are different in either the production
    ; or development versions of the INIs with respect to PHP's default behavior.
    ; Please see the actual settings later in the document for more details as to why
    ; we recommend these changes in PHP's behavior.
    ; display_errors
    ; Default Value: On
    ; Development Value: On
    ; Production Value: Off
    ; display_startup_errors
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: Off
    ; error_reporting
    ; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
    ; Development Value: E_ALL
    ; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
    ; html_errors
    ; Default Value: On
    ; Development Value: On
    ; Production value: On
    ; log_errors
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: On
    ; max_input_time
    ; Default Value: -1 (Unlimited)
    ; Development Value: 60 (60 seconds)
    ; Production Value: 60 (60 seconds)
    ; output_buffering
    ; Default Value: Off
    ; Development Value: 4096
    ; Production Value: 4096
    ; register_argc_argv
    ; Default Value: On
    ; Development Value: Off
    ; Production Value: Off
    ; request_order
    ; Default Value: None
    ; Development Value: "GP"
    ; Production Value: "GP"
    ; session.bug_compat_42
    ; Default Value: On
    ; Development Value: On
    ; Production Value: Off
    ; session.bug_compat_warn
    ; Default Value: On
    ; Development Value: On
    ; Production Value: Off
    ; session.gc_divisor
    ; Default Value: 100
    ; Development Value: 1000
    ; Production Value: 1000
    ; session.hash_bits_per_character
    ; Default Value: 4
    ; Development Value: 5
    ; Production Value: 5
    ; short_open_tag
    ; Default Value: On
    ; Development Value: Off
    ; Production Value: Off
    ; track_errors
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: Off
    ; url_rewriter.tags
    ; Default Value: "a=href,area=href,frame=src,form=,fieldset="
    ; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
    ; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
    ; variables_order
    ; Default Value: "EGPCS"
    ; Development Value: "GPCS"
    ; Production Value: "GPCS"
    ; php.ini Options ;
    ; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
    ;user_ini.filename = ".user.ini"
    ; To disable this feature set this option to empty value
    ;user_ini.filename =
    ; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
    ;user_ini.cache_ttl = 300
    ; Language Options ;
    ; Enable the PHP scripting language engine under Apache.
    ; http://php.net/engine
    engine = On
    ; This directive determines whether or not PHP will recognize code between
    ; <? and ?> tags as PHP source which should be processed as such. It's been
    ; recommended for several years that you not use the short tag "short cut" and
    ; instead to use the full <?php and ?> tag combination. With the wide spread use
    ; of XML and use of these tags by other languages, the server can become easily
    ; confused and end up parsing the wrong code in the wrong context. But because
    ; this short cut has been a feature for such a long time, it's currently still
    ; supported for backwards compatibility, but we recommend you don't use them.
    ; Default Value: On
    ; Development Value: Off
    ; Production Value: Off
    ; http://php.net/short-open-tag
    short_open_tag = On
    ; Allow ASP-style <% %> tags.
    ; http://php.net/asp-tags
    asp_tags = Off
    ; The number of significant digits displayed in floating point numbers.
    ; http://php.net/precision
    precision = 14
    ; Output buffering is a mechanism for controlling how much output data
    ; (excluding headers and cookies) PHP should keep internally before pushing that
    ; data to the client. If your application's output exceeds this setting, PHP
    ; will send that data in chunks of roughly the size you specify.
    ; Turning on this setting and managing its maximum buffer size can yield some
    ; interesting side-effects depending on your application and web server.
    ; You may be able to send headers and cookies after you've already sent output
    ; through print or echo. You also may see performance benefits if your server is
    ; emitting less packets due to buffered output versus PHP streaming the output
    ; as it gets it. On production servers, 4096 bytes is a good setting for performance
    ; reasons.
    ; Note: Output buffering can also be controlled via Output Buffering Control
    ; functions.
    ; Possible Values:
    ; On = Enabled and buffer is unlimited. (Use with caution)
    ; Off = Disabled
    ; Integer = Enables the buffer and sets its maximum size in bytes.
    ; Note: This directive is hardcoded to Off for the CLI SAPI
    ; Default Value: Off
    ; Development Value: 4096
    ; Production Value: 4096
    ; http://php.net/output-buffering
    output_buffering = 4096
    ; You can redirect all of the output of your scripts to a function. For
    ; example, if you set output_handler to "mb_output_handler", character
    ; encoding will be transparently converted to the specified encoding.
    ; Setting any output handler automatically turns on output buffering.
    ; Note: People who wrote portable scripts should not depend on this ini
    ; directive. Instead, explicitly set the output handler using ob_start().
    ; Using this ini directive may cause problems unless you know what script
    ; is doing.
    ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
    ; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
    ; Note: output_handler must be empty if this is set 'On' !!!!
    ; Instead you must use zlib.output_handler.
    ; http://php.net/output-handler
    ;output_handler =
    ; Transparent output compression using the zlib library
    ; Valid values for this option are 'off', 'on', or a specific buffer size
    ; to be used for compression (default is 4KB)
    ; Note: Resulting chunk size may vary due to nature of compression. PHP
    ; outputs chunks that are few hundreds bytes each as a result of
    ; compression. If you prefer a larger chunk size for better
    ; performance, enable output_buffering in addition.
    ; Note: You need to use zlib.output_handler instead of the standard
    ; output_handler, or otherwise the output will be corrupted.
    ; http://php.net/zlib.output-compression
    zlib.output_compression = Off
    ; http://php.net/zlib.output-compression-level
    ;zlib.output_compression_level = -1
    ; You cannot specify additional output handlers if zlib.output_compression
    ; is activated here. This setting does the same as output_handler but in
    ; a different order.
    ; http://php.net/zlib.output-handler
    ;zlib.output_handler =
    ; Implicit flush tells PHP to tell the output layer to flush itself
    ; automatically after every output block. This is equivalent to calling the
    ; PHP function flush() after each and every call to print() or echo() and each
    ; and every HTML block. Turning this option on has serious performance
    ; implications and is generally recommended for debugging purposes only.
    ; http://php.net/implicit-flush
    ; Note: This directive is hardcoded to On for the CLI SAPI
    implicit_flush = Off
    ; The unserialize callback function will be called (with the undefined class'
    ; name as parameter), if the unserializer finds an undefined class
    ; which should be instantiated. A warning appears if the specified function is
    ; not defined, or if the function doesn't include/implement the missing class.
    ; So only set this entry, if you really want to implement such a
    ; callback-function.
    unserialize_callback_func =
    ; When floats & doubles are serialized store serialize_precision significant
    ; digits after the floating point. The default value ensures that when floats
    ; are decoded with unserialize, the data will remain the same.
    serialize_precision = 17
    ; open_basedir, if set, limits all file operations to the defined directory
    ; and below. This directive makes most sense if used in a per-directory
    ; or per-virtualhost web server configuration file. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ; http://php.net/open-basedir
    open_basedir = /srv/http/:/home/:/tmp/:/usr/share/pear/:/usr/share/webapps/
    ; This directive allows you to disable certain functions for security reasons.
    ; It receives a comma-delimited list of function names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ; http://php.net/disable-functions
    disable_functions =
    ; This directive allows you to disable certain classes for security reasons.
    ; It receives a comma-delimited list of class names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ; http://php.net/disable-classes
    disable_classes =
    ; Colors for Syntax Highlighting mode. Anything that's acceptable in
    ; <span style="color: ???????"> would work.
    ; http://php.net/syntax-highlighting
    ;highlight.string = #DD0000
    ;highlight.comment = #FF9900
    ;highlight.keyword = #007700
    ;highlight.default = #0000BB
    ;highlight.html = #000000
    ; If enabled, the request will be allowed to complete even if the user aborts
    ; the request. Consider enabling it if executing long requests, which may end up
    ; being interrupted by the user or a browser timing out. PHP's default behavior
    ; is to disable this feature.
    ; http://php.net/ignore-user-abort
    ;ignore_user_abort = On
    ; Determines the size of the realpath cache to be used by PHP. This value should
    ; be increased on systems where PHP opens many files to reflect the quantity of
    ; the file operations performed.
    ; http://php.net/realpath-cache-size
    ;realpath_cache_size = 16k
    ; Duration of time, in seconds for which to cache realpath information for a given
    ; file or directory. For systems with rarely changing files, consider increasing this
    ; value.
    ; http://php.net/realpath-cache-ttl
    ;realpath_cache_ttl = 120
    ; Enables or disables the circular reference collector.
    ; http://php.net/zend.enable-gc
    zend.enable_gc = On
    ; If enabled, scripts may be written in encodings that are incompatible with
    ; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such
    ; encodings. To use this feature, mbstring extension must be enabled.
    ; Default: Off
    ;zend.multibyte = Off
    ; Allows to set the default encoding for the scripts. This value will be used
    ; unless "declare(encoding=...)" directive appears at the top of the script.
    ; Only affects if zend.multibyte is set.
    ; Default: ""
    ;zend.script_encoding =
    ; Miscellaneous ;
    ; Decides whether PHP may expose the fact that it is installed on the server
    ; (e.g. by adding its signature to the Web server header). It is no security
    ; threat in any way, but it makes it possible to determine whether you use PHP
    ; on your server or not.
    ; http://php.net/expose-php
    expose_php = On
    ; Resource Limits ;
    ; Maximum execution time of each script, in seconds
    ; http://php.net/max-execution-time
    ; Note: This directive is hardcoded to 0 for the CLI SAPI
    max_execution_time = 30
    ; Maximum amount of time each script may spend parsing request data. It's a good
    ; idea to limit this time on productions servers in order to eliminate unexpectedly
    ; long running scripts.
    ; Note: This directive is hardcoded to -1 for the CLI SAPI
    ; Default Value: -1 (Unlimited)
    ; Development Value: 60 (60 seconds)
    ; Production Value: 60 (60 seconds)
    ; http://php.net/max-input-time
    max_input_time = 60
    ; Maximum input variable nesting level
    ; http://php.net/max-input-nesting-level
    ;max_input_nesting_level = 64
    ; How many GET/POST/COOKIE input variables may be accepted
    ; max_input_vars = 1000
    ; Maximum amount of memory a script may consume (128MB)
    ; http://php.net/memory-limit
    memory_limit = 128M
    ; Error handling and logging ;
    ; This directive informs PHP of which errors, warnings and notices you would like
    ; it to take action for. The recommended way of setting values for this
    ; directive is through the use of the error level constants and bitwise
    ; operators. The error level constants are below here for convenience as well as
    ; some common settings and their meanings.
    ; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
    ; those related to E_NOTICE and E_STRICT, which together cover best practices and
    ; recommended coding standards in PHP. For performance reasons, this is the
    ; recommend error reporting setting. Your production server shouldn't be wasting
    ; resources complaining about best practices and coding standards. That's what
    ; development servers and development settings are for.
    ; Note: The php.ini-development file has this setting as E_ALL. This
    ; means it pretty much reports everything which is exactly what you want during
    ; development and early testing.
    ; Error Level Constants:
    ; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
    ; E_ERROR - fatal run-time errors
    ; E_RECOVERABLE_ERROR - almost fatal run-time errors
    ; E_WARNING - run-time warnings (non-fatal errors)
    ; E_PARSE - compile-time parse errors
    ; E_NOTICE - run-time notices (these are warnings which often result
    ; from a bug in your code, but it's possible that it was
    ; intentional (e.g., using an uninitialized variable and
    ; relying on the fact it's automatically initialized to an
    ; empty string)
    ; E_STRICT - run-time notices, enable to have PHP suggest changes
    ; to your code which will ensure the best interoperability
    ; and forward compatibility of your code
    ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
    ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
    ; initial startup
    ; E_COMPILE_ERROR - fatal compile-time errors
    ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
    ; E_USER_ERROR - user-generated error message
    ; E_USER_WARNING - user-generated warning message
    ; E_USER_NOTICE - user-generated notice message
    ; E_DEPRECATED - warn about code that will not work in future versions
    ; of PHP
    ; E_USER_DEPRECATED - user-generated deprecation warnings
    ; Common Values:
    ; E_ALL (Show all errors, warnings and notices including coding standards.)
    ; E_ALL & ~E_NOTICE (Show all errors, except for notices)
    ; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.)
    ; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
    ; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
    ; Development Value: E_ALL
    ; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
    ; http://php.net/error-reporting
    error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT
    ; This directive controls whether or not and where PHP will output errors,
    ; notices and warnings too. Error output is very useful during development, but
    ; it could be very dangerous in production environments. Depending on the code
    ; which is triggering the error, sensitive information could potentially leak
    ; out of your application such as database usernames and passwords or worse.
    ; It's recommended that errors be logged on production servers rather than
    ; having the errors sent to STDOUT.
    ; Possible Values:
    ; Off = Do not display any errors
    ; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
    ; On or stdout = Display errors to STDOUT
    ; Default Value: On
    ; Development Value: On
    ; Production Value: Off
    ; http://php.net/display-errors
    display_errors = Off
    ; The display of errors which occur during PHP's startup sequence are handled
    ; separately from display_errors. PHP's default behavior is to suppress those
    ; errors from clients. Turning the display of startup errors on can be useful in
    ; debugging configuration problems. But, it's strongly recommended that you
    ; leave this setting off on production servers.
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: Off
    ; http://php.net/display-startup-errors
    display_startup_errors = Off
    ; Besides displaying errors, PHP can also log errors to locations such as a
    ; server-specific log, STDERR, or a location specified by the error_log
    ; directive found below. While errors should not be displayed on productions
    ; servers they should still be monitored and logging is a great way to do that.
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: On
    ; http://php.net/log-errors
    log_errors = On
    ; Set maximum length of log_errors. In error_log information about the source is
    ; added. The default is 1024 and 0 allows to not apply any maximum length at all.
    ; http://php.net/log-errors-max-len
    log_errors_max_len = 1024
    ; Do not log repeated messages. Repeated errors must occur in same file on same
    ; line unless ignore_repeated_source is set true.
    ; http://php.net/ignore-repeated-errors
    ignore_repeated_errors = Off
    ; Ignore source of message when ignoring repeated messages. When this setting
    ; is On you will not log errors with repeated messages from different files or
    ; source lines.
    ; http://php.net/ignore-repeated-source
    ignore_repeated_source = Off
    ; If this parameter is set to Off, then memory leaks will not be shown (on
    ; stdout or in the log). This has only effect in a debug compile, and if
    ; error reporting includes E_WARNING in the allowed list
    ; http://php.net/report-memleaks
    report_memleaks = On
    ; This setting is on by default.
    ;report_zend_debug = 0
    ; Store the last error/warning message in $php_errormsg (boolean). Setting this value
    ; to On can assist in debugging and is appropriate for development servers. It should
    ; however be disabled on production servers.
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: Off
    ; http://php.net/track-errors
    track_errors = Off
    ; Turn off normal error reporting and emit XML-RPC error XML
    ; http://php.net/xmlrpc-errors
    ;xmlrpc_errors = 0
    ; An XML-RPC faultCode
    ;xmlrpc_error_number = 0
    ; When PHP displays or logs an error, it has the capability of formatting the
    ; error message as HTML for easier reading. This directive controls whether
    ; the error message is formatted as HTML or not.
    ; Note: This directive is hardcoded to Off for the CLI SAPI
    ; Default Value: On
    ; Development Value: On
    ; Production value: On
    ; http://php.net/html-errors
    html_errors = On
    ; If html_errors is set to On *and* docref_root is not empty, then PHP
    ; produces clickable error messages that direct to a page describing the error
    ; or function causing the error in detail.
    ; You can download a copy of the PHP manual from http://php.net/docs
    ; and change docref_root to the base URL of your local copy including the
    ; leading '/'. You must also specify the file extension being used including
    ; the dot. PHP's default behavior is to leave these settings empty, in which
    ; case no links to documentation are generated.
    ; Note: Never use this feature for production boxes.
    ; http://php.net/docref-root
    ; Examples
    ;docref_root = "/phpmanual/"
    ; http://php.net/docref-ext
    ;docref_ext = .html
    ; String to output before an error message. PHP's default behavior is to leave
    ; this setting blank.
    ; http://php.net/error-prepend-string
    ; Example:
    ;error_prepend_string = "<span style='color: #ff0000'>"
    ; String to output after an error message. PHP's default behavior is to leave
    ; this setting blank.
    ; http://php.net/error-append-string
    ; Example:
    ;error_append_string = "</span>"
    ; Log errors to specified file. PHP's default behavior is to leave this value
    ; empty.
    ; http://php.net/error-log
    ; Example:
    ;error_log = php_errors.log
    ; Log errors to syslog (Event Log on NT, not valid in Windows 95).
    ;error_log = syslog
    ;windows.show_crt_warning
    ; Default value: 0
    ; Development value: 0
    ; Production value: 0
    ; Data Handling ;
    ; The separator used in PHP generated URLs to separate arguments.
    ; PHP's default setting is "&".
    ; http://php.net/arg-separator.output
    ; Example:
    ;arg_separator.output = "&amp;"
    ; List of separator(s) used by PHP to parse input URLs into variables.
    ; PHP's default setting is "&".
    ; NOTE: Every character in this directive is considered as separator!
    ; http://php.net/arg-separator.input
    ; Example:
    ;arg_separator.input = ";&"
    ; This directive determines which super global arrays are registered when PHP
    ; starts up. G,P,C,E & S are abbreviations for the following respective super
    ; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty
    ; paid for the registration of these arrays and because ENV is not as commonly
    ; used as the others, ENV is not recommended on productions servers. You
    ; can still get access to the environment variables through getenv() should you
    ; need to.
    ; Default Value: "EGPCS"
    ; Development Value: "GPCS"
    ; Production Value: "GPCS";
    ; http://php.net/variables-order
    variables_order = "GPCS"
    ; This directive determines which super global data (G,P,C,E & S) should
    ; be registered into the super global array REQUEST. If so, it also determines
    ; the order in which that data is registered. The values for this directive are
    ; specified in the same manner as the variables_order directive, EXCEPT one.
    ; Leaving this value empty will cause PHP to use the value set in the
    ; variables_order directive. It does not mean it will leave the super globals
    ; array REQUEST empty.
    ; Default Value: None
    ; Development Value: "GP"
    ; Production Value: "GP"
    ; http://php.net/request-order
    request_order = "GP"
    ; This directive determines whether PHP registers $argv & $argc each time it
    ; runs. $argv contains an array of all the arguments passed to PHP when a script
    ; is invoked. $argc contains an integer representing the number of arguments
    ; that were passed when the script was invoked. These arrays are extremely
    ; useful when running scripts from the command line. When this directive is
    ; enabled, registering these variables consumes CPU cycles and memory each time
    ; a script is executed. For performance reasons, this feature should be disabled
    ; on production servers.
    ; Note: This directive is hardcoded to On for the CLI SAPI
    ; Default Value: On
    ; Development Value: Off
    ; Production Value: Off
    ; http://php.net/register-argc-argv
    register_argc_argv = Off
    ; When enabled, the ENV, REQUEST and SERVER variables are created when they're
    ; first used (Just In Time) instead of when the script starts. If these
    ; variables are not used within a script, having this directive on will result
    ; in a performance gain. The PHP directive register_argc_argv must be disabled
    ; for this directive to have any affect.
    ; http://php.net/auto-globals-jit
    auto_globals_jit = On
    ; Whether PHP will read the POST data.
    ; This option is enabled by default.
    ; Most likely, you won't want to disable this option globally. It causes $_POST
    ; and $_FILES to always be empty; the only way you will be able to read the
    ; POST data will be through the php://input stream wrapper. This can be useful
    ; to proxy requests or to process the POST data in a memory efficient fashion.
    ; http://php.net/enable-post-data-reading
    ;enable_post_data_reading = Off
    ; Maximum size of POST data that PHP will accept.
    ; Its value may be 0 to disable the limit. It is ignored if POST data reading
    ; is disabled through enable_post_data_reading.
    ; http://php.net/post-max-size
    post_max_size = 8M
    ; Automatically add files before PHP document.
    ; http://php.net/auto-prepend-file
    auto_prepend_file =
    ; Automatically add files after PHP document.
    ; http://php.net/auto-append-file
    auto_append_file =
    ; By default, PHP will output a character encoding using
    ; the Content-type: header. To disable sending of the charset, simply
    ; set it to be empty.
    ; PHP's built-in default is text/html
    ; http://php.net/default-mimetype
    default_mimetype = "text/html"
    ; PHP's default character set is set to empty.
    ; http://php.net/default-charset
    ;default_charset = "UTF-8"
    ; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
    ; to disable this feature. If post reading is disabled through
    ; enable_post_data_reading, $HTTP_RAW_POST_DATA is *NOT* populated.
    ; http://php.net/always-populate-raw-post-data
    ;always_populate_raw_post_data = On
    ; Paths and Directories ;
    ; UNIX: "/path1:/path2"
    include_path = ".:/usr/share/pear"
    ; Windows: "\path1;\path2"
    ;include_path = ".;c:\php\includes"
    ; PHP's default setting for include_path is ".;/path/to/php/pear"
    ; http://php.net/include-path
    ; The root of the PHP pages, used only if nonempty.
    ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
    ; if you are running php as a CGI under any web server (other than IIS)
    ; see documentation for security issues. The alternate is to use the
    ; cgi.force_redirect configuration below
    ; http://php.net/doc-root
    doc_root =
    ; The directory under which PHP opens the script using /~username used only
    ; if nonempty.
    ; http://php.net/user-dir
    user_dir =
    ; Directory in which the loadable extensions (modules) reside.
    ; http://php.net/extension-dir
    extension_dir = "/usr/lib/php/modules/"
    ; On windows:
    ; extension_dir = "ext"
    ; Whether or not to enable the dl() function. The dl() function does NOT work
    ; properly in multithreaded servers, such as IIS or Zeus, and is automatically
    ; disabled on them.
    ; http://php.net/enable-dl
    enable_dl = Off
    ; cgi.force_redirect is necessary to provide security running PHP as a CGI under
    ; most web servers. Left undefined, PHP turns this on by default. You can
    ; turn it off here AT YOUR OWN RISK
    ; **You CAN safely turn this off for IIS, in fact, you MUST.**
    ; http://php.net/cgi.force-redirect
    ;cgi.force_redirect = 1
    ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
    ; every request. PHP's default behavior is to disable this feature.
    ;cgi.nph = 1
    ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
    ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
    ; will look for to know it is OK to continue execution. Setting this variable MAY
    ; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
    ; http://php.net/cgi.redirect-status-env
    ;cgi.redirect_status_env =
    ; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
    ; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
    ; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
    ; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
    ; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
    ; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
    ; http://php.net/cgi.fix-pathinfo
    ;cgi.fix_pathinfo=1
    ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
    ; security tokens of the calling client. This allows IIS to define the
    ; security context that the request runs under. mod_fastcgi under Apache
    ; does not currently support this feature (03/17/2002)
    ; Set to 1 if running under IIS. Default is zero.
    ; http://php.net/fastcgi.impersonate
    ;fastcgi.impersonate = 1
    ; Disable logging through FastCGI connection. PHP's default behavior is to enable
    ; this feature.
    ;fastcgi.logging = 0
    ; cgi.rfc2616_headers configuration option tells PHP what type of headers to
    ; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
    ; is supported by Apache. When this option is set to 1 PHP will send
    ; RFC2616 compliant header.
    ; Default is zero.
    ; http://php.net/cgi.rfc2616-headers
    ;cgi.rfc2616_headers = 0
    ; File Uploads ;
    ; Whether to allow HTTP file uploads.
    ; http://php.net/file-uploads
    file_uploads = On
    ; Temporary directory for HTTP uploaded files (will use system default if not
    ; specified).
    ; http://php.net/upload-tmp-dir
    ;upload_tmp_dir =
    ; Maximum allowed size for uploaded files.
    ; http://php.net/upload-max-filesize
    upload_max_filesize = 2M
    ; Maximum number of files that can be uploaded via a single request
    max_file_uploads = 20
    ; Fopen wrappers ;
    ; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
    ; http://php.net/allow-url-fopen
    allow_url_fopen = On
    ; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
    ; http://php.net/allow-url-include
    allow_url_include = Off
    ; Define the anonymous ftp password (your email address). PHP's default setting
    ; for this is empty.
    ; http://php.net/from
    ;from="[email protected]"
    ; Define the User-Agent string. PHP's default setting for this is empty.
    ; http://php.net/user-agent
    ;user_agent="PHP"
    ; Default timeout for socket based streams (seconds)
    ; http://php.net/default-socket-timeout
    default_socket_timeout = 60
    ; If your scripts have to deal with files from Macintosh systems,
    ; or you are running on a Mac and need to deal with files from
    ; unix or win32 systems, setting this flag will cause PHP to
    ; automatically detect the EOL character in those files so that
    ; fgets() and file() will work regardless of the source of the file.
    ; http://php.net/auto-detect-line-endings
    ;auto_detect_line_endings = Off
    ; Dynamic Extensions ;
    ; If you wish to have an extension loaded automatically, use the following
    ; syntax:
    ; extension=modulename.extension
    ; For example, on Windows:
    ; extension=msql.dll
    ; ... or under UNIX:
    ; extension=msql.so
    ; ... or with a path:
    ; extension=/path/to/extension/msql.so
    ; If you only provide the name of the extension, PHP will look for it in its
    ; default extension directory.
    ;extension=bcmath.so
    ;extension=bz2.so
    ;extension=calendar.so
    extension=curl.so
    ;extension=dba.so
    ;extension=enchant.so
    ;extension=exif.so
    ;extension=ftp.so
    ;extension=gd.so
    extension=gettext.so
    ;extension=gmp.so
    ;extension=iconv.so
    ;extension=imap.so
    ;extension=intl.so
    ;extension=ldap.so
    ;extension=mcrypt.so
    ;extension=mssql.so
    ;extension=mysqli.so
    ;extension=mysql.so
    ;extension=odbc.so
    ;extension=openssl.so
    ;extension=pdo_mysql.so
    ;extension=pdo_odbc.so
    ;extension=pdo_pgsql.so
    ;extension=pdo_sqlite.so
    ;extension=pgsql.so
    ;extension=phar.so
    ;extension=posix.so
    ;extension=pspell.so
    ;extension=shmop.so
    ;extension=snmp.so
    ;extension=soap.so
    ;extension=sockets.so
    ;extension=sqlite3.so
    ;extension=sysvmsg.so
    ;extension=sysvsem.so
    ;extension=sysvshm.so
    ;extension=tidy.so
    ;extension=xmlrpc.so
    ;extension=xsl.so
    ;extension=zip.so
    ; Module Settings ;
    [CLI Server]
    ; Whether the CLI web server uses ANSI color coding in its terminal output.
    cli_server.color = On
    [Date]
    ; Defines the default timezone used by the date functions
    ; http://php.net/date.timezone
    ;date.timezone =
    ; http://php.net/date.default-latitude
    ;date.default_latitude = 31.7667
    ; http://php.net/date.default-longitude
    ;date.default_longitude = 35.2333
    ; http://php.net/date.sunrise-zenith
    ;date.sunrise_zenith = 90.583333
    ; http://php.net/date.sunset-zenith
    ;date.sunset_zenith = 90.583333
    [filter]
    ; http://php.net/filter.default
    ;filter.default = unsafe_raw
    ; http://php.net/filter.default-flags
    ;filter.default_flags =
    [iconv]
    ;iconv.input_encoding = ISO-8859-1
    ;iconv.internal_encoding = ISO-8859-1
    ;iconv.output_encoding = ISO-8859-1
    [intl]
    ;intl.default_locale =
    ; This directive allows you to produce PHP errors when some error
    ; happens within intl functions. The value is the level of the error produced.
    ; Default is 0, which does not produce any errors.
    ;intl.error_level = E_WARNING
    [sqlite]
    ; http://php.net/sqlite.assoc-case
    ;sqlite.assoc_case = 0
    [sqlite3]
    ;sqlite3.extension_dir =
    [Pcre]
    ;PCRE library backtracking limit.
    ; http://php.net/pcre.backtrack-limit
    ;pcre.backtrack_limit=100000
    ;PCRE library recursion limit.
    ;Please note that if you set this value to a high number you may consume all
    ;the available process stack and eventually crash PHP (due to reaching the
    ;stack size limit imposed by the Operating System).
    ; http://php.net/pcre.recursion-limit
    ;pcre.recursion_limit=100000
    [Pdo]
    ; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
    ; http://php.net/pdo-odbc.connection-pooling
    ;pdo_odbc.connection_pooling=strict
    ;pdo_odbc.db2_instance_name
    [Pdo_mysql]
    ; If mysqlnd is used: Number of cache slots for the internal result set cache
    ; http://php.net/pdo_mysql.cache_size
    pdo_mysql.cache_size = 2000
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    ; http://php.net/pdo_mysql.default-socket
    pdo_mysql.default_socket=
    [Phar]
    ; http://php.net/phar.readonly
    ;phar.readonly = On
    ; http://php.net/phar.require-hash
    ;phar.require_hash = On
    ;phar.cache_list =
    [mail function]
    ; For Win32 only.
    ; http://php.net/smtp
    SMTP = localhost
    ; http://php.net/smtp-port
    smtp_port = 25
    ; For Win32 only.
    ; http://php.net/sendmail-from
    ;sendmail_from = [email protected]
    ; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
    ; http://php.net/sendmail-path
    ;sendmail_path =
    ; Force the addition of the specified parameters to be passed as extra parameters
    ; to the sendmail binary. These parameters will always replace the value of
    ; the 5th parameter to mail(), even in safe mode.
    ;mail.force_extra_parameters =
    ; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
    mail.add_x_header = On
    ; The path to a log file that will log all mail() calls. Log entries include
    ; the full path of the script, line number, To address and headers.
    ;mail.log =
    ; Log mail to syslog (Event Log on NT, not valid in Windows 95).
    ;mail.log = syslog
    [SQL]
    ; http://php.net/sql.safe-mode
    sql.safe_mode = Off
    [ODBC]
    ; http://php.net/odbc.default-db
    ;odbc.default_db = Not yet implemented
    ; http://php.net/odbc.default-user
    ;odbc.default_user = Not yet implemented
    ; http://php.net/odbc.default-pw
    ;odbc.default_pw = Not yet implemented
    ; Controls the ODBC cursor model.
    ; Default: SQL_CURSOR_STATIC (default).
    ;odbc.default_cursortype
    ; Allow or prevent persistent links.
    ; http://php.net/odbc.allow-persistent
    odbc.allow_persistent = On
    ; Check that a connection is still valid before reuse.
    ; http://php.net/odbc.check-persistent
    odbc.check_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    ; http://php.net/odbc.max-persistent
    odbc.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ; http://php.net/odbc.max-links
    odbc.max_links = -1
    ; Handling of LONG fields. Returns number of bytes to variables. 0 means
    ; passthru.
    ; http://php.net/odbc.defaultlrl
    odbc.defaultlrl = 4096
    ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
    ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
    ; of odbc.defaultlrl and odbc.defaultbinmode
    ; http://php.net/odbc.defaultbinmode
    odbc.defaultbinmode = 1
    ;birdstep.max_links = -1
    [Interbase]
    ; Allow or prevent persistent links.
    ibase.allow_persistent = 1
    ; Maximum number of persistent links. -1 means no limit.

    rune0077 wrote:
    Try this solution:
    https://wiki.archlinux.org/index.php/Ng … gh_FastCGI
    That isn't exactly my problem. The server responds with no body (so no blank html document)
    root@server ~# curl -vH "Host: ███████" localhost/test.php
    * Hostname was NOT found in DNS cache
    * Trying ::1...
    * connect to ::1 port 80 failed: Connection refused
    * Trying 127.0.0.1...
    * Connected to localhost (127.0.0.1) port 80 (#0)
    > GET /test.php HTTP/1.1
    > User-Agent: curl/7.36.0
    > Accept: */*
    > Host: ███████████
    >
    < HTTP/1.1 200 OK
    * Server nginx/1.6.0 is not blacklisted
    < Server: nginx/1.6.0
    < Date: Tue, 20 May 2014 20:11:02 GMT
    < Content-Type: text/html
    < Transfer-Encoding: chunked
    < Connection: keep-alive
    < Vary: Accept-Encoding
    <
    * Connection #0 to host localhost left intact
    When I do set SCRIPT_FILENAME to $document_root$fastcgi_script_name, it responds with "No input file specified."
    Spider.007 wrote:If there are no errors; tell us what your access-logs tell. Enable them in fpm and tell us if the request ends up there. Also; nginx can also log the upstream ip-address; if you add that to the access-logs you'll at least know if the problem is nginx, or fpm
    The nginx log message:
    127.0.0.1 - - [20/May/2014:14:15:50 -0600] "GET /test.php HTTP/1.1" 200 5 "-" "curl/7.36.0"
    I'll try to find a way to make php-fpm more verbose and I'll edit this post with the error when I do. At the moment it's only logging startups/shutdowns.
    Last edited by phillips1012 (2014-05-20 20:23:40)

  • Personalization is not getting deleted in R12

    Hey OAF gurus,
    I have extended a standard CO in R12 and through personalization I attached my custom CO to that standard page .
    But due to some reason page is erroring out before rendering itself .So, now I want to delete that personalization .
    I tried with jdr_utils.deletedocument but it still pointing to my custom CO .
    Even I set the profile "Disable Self-Service Personal" as yes and then navigated to that page after that I tried to remove the custom CO by clicking personalize page but after clicking apply its still pointing to my custom CO.
    Please help me on this .
    Even when I am executing jdr_utils.listcustomizations its not showing anything which means that there is no personalization . But I am still getting the error which is pointing to my custom CO.

    Thanks sushant/Moorthy.
    I am able to delete the personalization .
    But when I am attaching I custom CO then I am getting the below error :-
    oracle.apps.fnd.framework.OAException: oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.classloader.util.AnnotatedNoClassDefFoundError, msg=
    *     Missing class: who.oracle.apps.ap.payments.psr.webui.APExtension (wrong name: who.oracle.apps.ap.payments.webui.APExtension)*
    *     Dependent class: who.oracle.apps.ap.payments.psr.webui.APExtension*
    *     Loader: oacore.root:0.0.0*
    *     Code-Source: /u02/apr12dev/r12dev/apps/apps_st/comn/java/classes/*
    *     Configuration: <library> in /u02/apr12dev/r12dev/apps/apps_st/comn/webapps/oacore/*
    The missing class is not available from any code-source or loader in the system.
    *     at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:912)*
    *     at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:888)*
    *     at OAErrorPage.jspService(_OAErrorPage.java:221)*
    *     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)*
    *     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:390)*
    *     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)*
    *     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)*
    *     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)*
    *     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:734)*
    *     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391)*
    *     at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:280)*
    *     at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:68)*
    *     at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:214)*
    *     at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)*
    *     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:219)*
    *     at com.evermind.server.http.EvermindPageContext.handlePageThrowable(EvermindPageContext.java:871)*
    *     at com.evermind.server.http.EvermindPageContext.handlePageException(EvermindPageContext.java:816)*
    *     at OA.jspService(_OA.java:256)*
    *     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)*
    *     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:390)*
    *     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)*
    *     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)*
    *     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)*
    *     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:734)*
    *     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391)*
    *     at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:280)*
    *     at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:68)*
    *     at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:214)*
    *     at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)*
    *     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:219)*
    *     at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:395)*
    *     at OA.jspService(_OA.java:221)*
    *     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)*
    *     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:390)*
    *     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)*
    *     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)*
    *     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)*
    *     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)*
    *     at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)*
    *     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)*
    *     at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)*
    *     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:642)*
    *     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391)*
    *     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:908)*
    *     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:458)*
    *     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)*
    *     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)*
    *     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)*
    *     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)*
    *     at java.lang.Thread.run(Thread.java:619)*
    *## Detail 0 ##*
    oracle.classloader.util.AnnotatedNoClassDefFoundError:
    *     Missing class: who.oracle.apps.ap.payments.psr.webui.APExtension (wrong name: who.oracle.apps.ap.payments.webui.APExtension)*
    *     Dependent class: who.oracle.apps.ap.payments.psr.webui.APExtension*
    *     Loader: oacore.root:0.0.0*
    *     Code-Source: /u02/apr12dev/r12dev/apps/apps_st/comn/java/classes/*
    *     Configuration: <library> in /u02/apr12dev/r12dev/apps/apps_st/comn/webapps/oacore/*
    The missing class is not available from any code-source or loader in the system.
    *     at oracle.classloader.PolicyClassLoader.defineClass(PolicyClassLoader.java:2401)*
    *     at oracle.classloader.PolicyClassLoader.findLocalClass(PolicyClassLoader.java:1539)*
    *     at oracle.classloader.SearchPolicy$FindLocal.getClass(SearchPolicy.java:226)*
    *     at oracle.classloader.SearchSequence.getClass(SearchSequence.java:119)*
    *     at oracle.classloader.SearchPolicy.loadClass(SearchPolicy.java:852)*
    *     at oracle.classloader.PolicyClassLoader.askParentForClass(PolicyClassLoader.java:1355)*
    *     at oracle.classloader.SearchPolicy$AskParent.getClass(SearchPolicy.java:72)*
    *     at oracle.classloader.SearchSequence.getClass(SearchSequence.java:119)*
    *     at oracle.classloader.PolicyClassLoader.internalLoadClass(PolicyClassLoader.java:1721)*
    *     at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1682)*
    *     at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1667)*
    *     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)*
    *     at java.lang.Class.forName0(Native Method)*
    *     at java.lang.Class.forName(Class.java:247)*
    *     at oracle.jbo.common.java2.JDK2ClassLoader.loadClassForName(JDK2ClassLoader.java:38)*
    *     at oracle.jbo.common.JBOClass.forName(JBOClass.java:164)*
    *     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.getController(OAWebBeanHelper.java:1871)*
    *     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:572)*
    *     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252)*
    *     at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1182)*
    *     at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569)*
    *     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:968)*
    *     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:935)*
    *     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:659)*
    *     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252)*
    *     at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(OAFormBean.java:385)*
    *     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:968)*
    *     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:935)*
    *     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:659)*
    *     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252)*
    *     at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:353)*
    *     at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2607)*
    *     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1940)*
    *     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:543)*
    *     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:431)*
    *     at OA.jspService(_OA.java:212)*
    *     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)*
    *     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:390)*
    *     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)*
    *     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)*
    *     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)*
    *     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:734)*
    *     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391)*
    *     at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:280)*
    *     at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:68)*
    *     at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:214)*
    *     at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)*
    *     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:219)*
    *     at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:395)*
    *     at OA.jspService(_OA.java:221)*
    *     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)*
    *     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:390)*
    *     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)*
    *     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)*
    *     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)*
    *     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)*
    *     at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)*
    *     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)*
    *     at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)*
    *     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:642)*
    *     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391)*
    *     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:908)*
    *     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:458)*
    *     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)*
    *     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)*
    *     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)*
    *     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)*
    *     at java.lang.Thread.run(Thread.java:619)*
    I placed my custom CO file in server at below path :-
    who.oracle.apps.ap.payments.psr.webui.APExtension but error file says wrong path who.oracle.apps.ap.payments.webui.APExtension

  • Nginx with php-fpm, connection with php-fpm.sock failed

    I am feeling stumped, trying to setup NGINX for the first time on Arch. Followed the wiki a few times and keep getting hung up in the same spot. I followed the instructions to install NGINX in a chroot, then went on to setup php-fpm. I have not tried setting up any sites, just trying to get to the point of showing the "it works" page, before I moved to setting up a site.
    The error I am getting on the page
    Sorry, the page you are looking for is currently unavailable.
    Please try again later.
    error in log
    2013/03/07 13:04:05 [crit] 1868#0: *1 connect() to unix:/run/php-fpm/php-fpm.sock failed (2: No such file or directory) while connecting to upstream, client: MYIP, server: SERVERIP, request: "GET / HTTP/1.1", upstream: "fastcgi://unix:/run/php-fpm/php-fpm.sock:", host: "SERVERIP"
    SERVERIP: is the IP of the server and shows properly in the log, same with MYIP
    Here are my configs
    /srv/http/etc/nginx.conf
    #user http;
    worker_processes 1;
    #error_log logs/error.log;
    #error_log logs/error.log notice;
    #error_log logs/error.log info;
    #pid logs/nginx.pid;
    events {
    worker_connections 1024;
    http {
    include mime.types;
    default_type application/octet-stream;
    #log_format main '$remote_addr - $remote_user [$time_local] "$request" '
    # '$status $body_bytes_sent "$http_referer" '
    # '"$http_user_agent" "$http_x_forwarded_for"';
    #access_log logs/access.log main;
    sendfile on;
    #tcp_nopush on;
    #keepalive_timeout 0;
    keepalive_timeout 65;
    #gzip on;
    server {
    listen 80;
    server_name SERVERIP;
    include fpm.conf;
    #charset koi8-r;
    #access_log logs/host.access.log main;
    location / {
    root /usr/share/nginx/html;
    index index.html index.htm;
    #error_page 404 /404.html;
    # redirect server error pages to the static page /50x.html
    error_page 500 502 503 504 /50x.html;
    location = /50x.html {
    root /usr/share/nginx/html;
    # proxy the PHP scripts to Apache listening on 127.0.0.1:80
    #location ~ \.php$ {
    # proxy_pass http://127.0.0.1;
    # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
    #location ~ \.php$ {
    # root html;
    # fastcgi_pass 127.0.0.1:9000;
    # fastcgi_index index.php;
    # fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name;
    # include fastcgi_params;
    # deny access to .htaccess files, if Apache's document root
    # concurs with nginx's one
    #location ~ /\.ht {
    # deny all;
    # another virtual host using mix of IP-, name-, and port-based configuration
    #server {
    # listen 8000;
    # listen somename:8080;
    # server_name somename alias another.alias;
    # location / {
    # root html;
    # index index.html index.htm;
    # HTTPS server
    #server {
    # listen 443;
    # server_name localhost;
    # ssl on;
    # ssl_certificate cert.pem;
    # ssl_certificate_key cert.key;
    # ssl_session_timeout 5m;
    # ssl_protocols SSLv2 SSLv3 TLSv1;
    # ssl_ciphers HIGH:!aNULL:!MD5;
    # ssl_prefer_server_ciphers on;
    # location / {
    # root html;
    # index index.html index.htm;
    /srv/http/etc/nginx/fpm.conf  - this is the file in the wiki that says php.conf
    location ~ \.(php|html|htm)$ {
    fastcgi_pass unix:/run/php-fpm/php-fpm.sock;
    fastcgi_index index.php;
    include fastcgi.conf;
    /etc/php/php-fpm.conf
    ; FPM Configuration ;
    ; All relative paths in this configuration file are relative to PHP's install
    ; prefix (/usr). This prefix can be dynamicaly changed by using the
    ; '-p' argument from the command line.
    ; Include one or more files. If glob(3) exists, it is used to include a bunch of
    ; files from a glob(3) pattern. This directive can be used everywhere in the
    ; file.
    ; Relative path can also be used. They will be prefixed by:
    ; - the global prefix if it's been set (-p arguement)
    ; - /usr otherwise
    ;include=/etc/php/fpm.d/*.conf
    ; Global Options ;
    [global]
    ; Pid file
    ; Note: the default prefix is /var
    ; Default Value: none
    pid = /run/php-fpm/php-fpm.pid
    ; Error log file
    ; If it's set to "syslog", log is sent to syslogd instead of being written
    ; in a local file.
    ; Note: the default prefix is /var
    ; Default Value: log/php-fpm.log
    ;error_log = log/php-fpm.log
    ; syslog_facility is used to specify what type of program is logging the
    ; message. This lets syslogd specify that messages from different facilities
    ; will be handled differently.
    ; See syslog(3) for possible values (ex daemon equiv LOG_DAEMON)
    ; Default Value: daemon
    ;syslog.facility = daemon
    ; syslog_ident is prepended to every message. If you have multiple FPM
    ; instances running on the same server, you can change the default value
    ; which must suit common needs.
    ; Default Value: php-fpm
    ;syslog.ident = php-fpm
    ; Log level
    ; Possible Values: alert, error, warning, notice, debug
    ; Default Value: notice
    ;log_level = notice
    ; If this number of child processes exit with SIGSEGV or SIGBUS within the time
    ; interval set by emergency_restart_interval then FPM will restart. A value
    ; of '0' means 'Off'.
    ; Default Value: 0
    ;emergency_restart_threshold = 0
    ; Interval of time used by emergency_restart_interval to determine when
    ; a graceful restart will be initiated. This can be useful to work around
    ; accidental corruptions in an accelerator's shared memory.
    ; Available Units: s(econds), m(inutes), h(ours), or d(ays)
    ; Default Unit: seconds
    ; Default Value: 0
    ;emergency_restart_interval = 0
    ; Time limit for child processes to wait for a reaction on signals from master.
    ; Available units: s(econds), m(inutes), h(ours), or d(ays)
    ; Default Unit: seconds
    ; Default Value: 0
    ;process_control_timeout = 0
    ; The maximum number of processes FPM will fork. This has been design to control
    ; the global number of processes when using dynamic PM within a lot of pools.
    ; Use it with caution.
    ; Note: A value of 0 indicates no limit
    ; Default Value: 0
    ; process.max = 128
    ; Specify the nice(2) priority to apply to the master process (only if set)
    ; The value can vary from -19 (highest priority) to 20 (lower priority)
    ; Note: - It will only work if the FPM master process is launched as root
    ; - The pool process will inherit the master process priority
    ; unless it specified otherwise
    ; Default Value: no set
    ; process.priority = -19
    ; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging.
    ; Default Value: yes
    ;daemonize = yes
    ; Set open file descriptor rlimit for the master process.
    ; Default Value: system defined value
    ;rlimit_files = 1024
    ; Set max core size rlimit for the master process.
    ; Possible Values: 'unlimited' or an integer greater or equal to 0
    ; Default Value: system defined value
    ;rlimit_core = 0
    ; Specify the event mechanism FPM will use. The following is available:
    ; - select (any POSIX os)
    ; - poll (any POSIX os)
    ; - epoll (linux >= 2.5.44)
    ; - kqueue (FreeBSD >= 4.1, OpenBSD >= 2.9, NetBSD >= 2.0)
    ; - /dev/poll (Solaris >= 7)
    ; - port (Solaris >= 10)
    ; Default Value: not set (auto detection)
    ; events.mechanism = epoll
    ; Pool Definitions ;
    ; Multiple pools of child processes may be started with different listening
    ; ports and different management options. The name of the pool will be
    ; used in logs and stats. There is no limitation on the number of pools which
    ; FPM can handle. Your system will tell you anyway :)
    ; Start a new pool named 'www'.
    ; the variable $pool can we used in any directive and will be replaced by the
    ; pool name ('www' here)
    [www]
    ; Per pool prefix
    ; It only applies on the following directives:
    ; - 'slowlog'
    ; - 'listen' (unixsocket)
    ; - 'chroot'
    ; - 'chdir'
    ; - 'php_values'
    ; - 'php_admin_values'
    ; When not set, the global prefix (or /usr) applies instead.
    ; Note: This directive can also be relative to the global prefix.
    ; Default Value: none
    ;prefix = /path/to/pools/$pool
    ; Unix user/group of processes
    ; Note: The user is mandatory. If the group is not set, the default user's group
    ; will be used.
    user = http
    group = http
    ; The address on which to accept FastCGI requests.
    ; Valid syntaxes are:
    ; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific address on
    ; a specific port;
    ; 'port' - to listen on a TCP socket to all addresses on a
    ; specific port;
    ; '/path/to/unix/socket' - to listen on a unix socket.
    ; Note: This value is mandatory.
    ;listen = 127.0.0.1:9000
    listen = /run/php-fpm/php-fpm.sock
    ; Set listen(2) backlog.
    ; Default Value: 128 (-1 on FreeBSD and OpenBSD)
    ;listen.backlog = 128
    ; Set permissions for unix socket, if one is used. In Linux, read/write
    ; permissions must be set in order to allow connections from a web server. Many
    ; BSD-derived systems allow connections regardless of permissions.
    ; Default Values: user and group are set as the running user
    ; mode is set to 0666
    listen.owner = http
    listen.group = http
    listen.mode = 0666
    ; List of ipv4 addresses of FastCGI clients which are allowed to connect.
    ; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
    ; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
    ; must be separated by a comma. If this value is left blank, connections will be
    ; accepted from any ip address.
    ; Default Value: any
    ;listen.allowed_clients = 127.0.0.1
    ; Specify the nice(2) priority to apply to the pool processes (only if set)
    ; The value can vary from -19 (highest priority) to 20 (lower priority)
    ; Note: - It will only work if the FPM master process is launched as root
    ; - The pool processes will inherit the master process priority
    ; unless it specified otherwise
    ; Default Value: no set
    ; priority = -19
    ; Choose how the process manager will control the number of child processes.
    ; Possible Values:
    ; static - a fixed number (pm.max_children) of child processes;
    ; dynamic - the number of child processes are set dynamically based on the
    ; following directives. With this process management, there will be
    ; always at least 1 children.
    ; pm.max_children - the maximum number of children that can
    ; be alive at the same time.
    ; pm.start_servers - the number of children created on startup.
    ; pm.min_spare_servers - the minimum number of children in 'idle'
    ; state (waiting to process). If the number
    ; of 'idle' processes is less than this
    ; number then some children will be created.
    ; pm.max_spare_servers - the maximum number of children in 'idle'
    ; state (waiting to process). If the number
    ; of 'idle' processes is greater than this
    ; number then some children will be killed.
    ; ondemand - no children are created at startup. Children will be forked when
    ; new requests will connect. The following parameter are used:
    ; pm.max_children - the maximum number of children that
    ; can be alive at the same time.
    ; pm.process_idle_timeout - The number of seconds after which
    ; an idle process will be killed.
    ; Note: This value is mandatory.
    pm = dynamic
    ; The number of child processes to be created when pm is set to 'static' and the
    ; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
    ; This value sets the limit on the number of simultaneous requests that will be
    ; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
    ; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
    ; CGI. The below defaults are based on a server without much resources. Don't
    ; forget to tweak pm.* to fit your needs.
    ; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
    ; Note: This value is mandatory.
    pm.max_children = 5
    ; The number of child processes created on startup.
    ; Note: Used only when pm is set to 'dynamic'
    ; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
    pm.start_servers = 2
    ; The desired minimum number of idle server processes.
    ; Note: Used only when pm is set to 'dynamic'
    ; Note: Mandatory when pm is set to 'dynamic'
    pm.min_spare_servers = 1
    ; The desired maximum number of idle server processes.
    ; Note: Used only when pm is set to 'dynamic'
    ; Note: Mandatory when pm is set to 'dynamic'
    pm.max_spare_servers = 3
    ; The number of seconds after which an idle process will be killed.
    ; Note: Used only when pm is set to 'ondemand'
    ; Default Value: 10s
    ;pm.process_idle_timeout = 10s;
    ; The number of requests each child process should execute before respawning.
    ; This can be useful to work around memory leaks in 3rd party libraries. For
    ; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
    ; Default Value: 0
    ;pm.max_requests = 500
    ; The URI to view the FPM status page. If this value is not set, no URI will be
    ; recognized as a status page. It shows the following informations:
    ; pool - the name of the pool;
    ; process manager - static, dynamic or ondemand;
    ; start time - the date and time FPM has started;
    ; start since - number of seconds since FPM has started;
    ; accepted conn - the number of request accepted by the pool;
    ; listen queue - the number of request in the queue of pending
    ; connections (see backlog in listen(2));
    ; max listen queue - the maximum number of requests in the queue
    ; of pending connections since FPM has started;
    ; listen queue len - the size of the socket queue of pending connections;
    ; idle processes - the number of idle processes;
    ; active processes - the number of active processes;
    ; total processes - the number of idle + active processes;
    ; max active processes - the maximum number of active processes since FPM
    ; has started;
    ; max children reached - number of times, the process limit has been reached,
    ; when pm tries to start more children (works only for
    ; pm 'dynamic' and 'ondemand');
    ; Value are updated in real time.
    ; Example output:
    ; pool: www
    ; process manager: static
    ; start time: 01/Jul/2011:17:53:49 +0200
    ; start since: 62636
    ; accepted conn: 190460
    ; listen queue: 0
    ; max listen queue: 1
    ; listen queue len: 42
    ; idle processes: 4
    ; active processes: 11
    ; total processes: 15
    ; max active processes: 12
    ; max children reached: 0
    ; By default the status page output is formatted as text/plain. Passing either
    ; 'html', 'xml' or 'json' in the query string will return the corresponding
    ; output syntax. Example:
    ; http://www.foo.bar/status
    ; http://www.foo.bar/status?json
    ; http://www.foo.bar/status?html
    ; http://www.foo.bar/status?xml
    ; By default the status page only outputs short status. Passing 'full' in the
    ; query string will also return status for each pool process.
    ; Example:
    ; http://www.foo.bar/status?full
    ; http://www.foo.bar/status?json&full
    ; http://www.foo.bar/status?html&full
    ; http://www.foo.bar/status?xml&full
    ; The Full status returns for each process:
    ; pid - the PID of the process;
    ; state - the state of the process (Idle, Running, ...);
    ; start time - the date and time the process has started;
    ; start since - the number of seconds since the process has started;
    ; requests - the number of requests the process has served;
    ; request duration - the duration in µs of the requests;
    ; request method - the request method (GET, POST, ...);
    ; request URI - the request URI with the query string;
    ; content length - the content length of the request (only with POST);
    ; user - the user (PHP_AUTH_USER) (or '-' if not set);
    ; script - the main script called (or '-' if not set);
    ; last request cpu - the %cpu the last request consumed
    ; it's always 0 if the process is not in Idle state
    ; because CPU calculation is done when the request
    ; processing has terminated;
    ; last request memory - the max amount of memory the last request consumed
    ; it's always 0 if the process is not in Idle state
    ; because memory calculation is done when the request
    ; processing has terminated;
    ; If the process is in Idle state, then informations are related to the
    ; last request the process has served. Otherwise informations are related to
    ; the current request being served.
    ; Example output:
    ; pid: 31330
    ; state: Running
    ; start time: 01/Jul/2011:17:53:49 +0200
    ; start since: 63087
    ; requests: 12808
    ; request duration: 1250261
    ; request method: GET
    ; request URI: /test_mem.php?N=10000
    ; content length: 0
    ; user: -
    ; script: /home/fat/web/docs/php/test_mem.php
    ; last request cpu: 0.00
    ; last request memory: 0
    ; Note: There is a real-time FPM status monitoring sample web page available
    ; It's available in: ${prefix}/share/fpm/status.html
    ; Note: The value must start with a leading slash (/). The value can be
    ; anything, but it may not be a good idea to use the .php extension or it
    ; may conflict with a real PHP file.
    ; Default Value: not set
    ;pm.status_path = /status
    ; The ping URI to call the monitoring page of FPM. If this value is not set, no
    ; URI will be recognized as a ping page. This could be used to test from outside
    ; that FPM is alive and responding, or to
    ; - create a graph of FPM availability (rrd or such);
    ; - remove a server from a group if it is not responding (load balancing);
    ; - trigger alerts for the operating team (24/7).
    ; Note: The value must start with a leading slash (/). The value can be
    ; anything, but it may not be a good idea to use the .php extension or it
    ; may conflict with a real PHP file.
    ; Default Value: not set
    ;ping.path = /ping
    ; This directive may be used to customize the response of a ping request. The
    ; response is formatted as text/plain with a 200 response code.
    ; Default Value: pong
    ;ping.response = pong
    ; The access log file
    ; Default: not set
    ;access.log = log/$pool.access.log
    ; The access log format.
    ; The following syntax is allowed
    ; %%: the '%' character
    ; %C: %CPU used by the request
    ; it can accept the following format:
    ; - %{user}C for user CPU only
    ; - %{system}C for system CPU only
    ; - %{total}C for user + system CPU (default)
    ; %d: time taken to serve the request
    ; it can accept the following format:
    ; - %{seconds}d (default)
    ; - %{miliseconds}d
    ; - %{mili}d
    ; - %{microseconds}d
    ; - %{micro}d
    ; %e: an environment variable (same as $_ENV or $_SERVER)
    ; it must be associated with embraces to specify the name of the env
    ; variable. Some exemples:
    ; - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
    ; - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
    ; %f: script filename
    ; %l: content-length of the request (for POST request only)
    ; %m: request method
    ; %M: peak of memory allocated by PHP
    ; it can accept the following format:
    ; - %{bytes}M (default)
    ; - %{kilobytes}M
    ; - %{kilo}M
    ; - %{megabytes}M
    ; - %{mega}M
    ; %n: pool name
    ; %o: ouput header
    ; it must be associated with embraces to specify the name of the header:
    ; - %{Content-Type}o
    ; - %{X-Powered-By}o
    ; - %{Transfert-Encoding}o
    ; %p: PID of the child that serviced the request
    ; %P: PID of the parent of the child that serviced the request
    ; %q: the query string
    ; %Q: the '?' character if query string exists
    ; %r: the request URI (without the query string, see %q and %Q)
    ; %R: remote IP address
    ; %s: status (response code)
    ; %t: server time the request was received
    ; it can accept a strftime(3) format:
    ; %d/%b/%Y:%H:%M:%S %z (default)
    ; %T: time the log has been written (the request has finished)
    ; it can accept a strftime(3) format:
    ; %d/%b/%Y:%H:%M:%S %z (default)
    ; %u: remote user
    ; Default: "%R - %u %t \"%m %r\" %s"
    ;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%"
    ; The log file for slow requests
    ; Default Value: not set
    ; Note: slowlog is mandatory if request_slowlog_timeout is set
    ;slowlog = log/$pool.log.slow
    ; The timeout for serving a single request after which a PHP backtrace will be
    ; dumped to the 'slowlog' file. A value of '0s' means 'off'.
    ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
    ; Default Value: 0
    ;request_slowlog_timeout = 0
    ; The timeout for serving a single request after which the worker process will
    ; be killed. This option should be used when the 'max_execution_time' ini option
    ; does not stop script execution for some reason. A value of '0' means 'off'.
    ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
    ; Default Value: 0
    ;request_terminate_timeout = 0
    ; Set open file descriptor rlimit.
    ; Default Value: system defined value
    ;rlimit_files = 1024
    ; Set max core size rlimit.
    ; Possible Values: 'unlimited' or an integer greater or equal to 0
    ; Default Value: system defined value
    ;rlimit_core = 0
    ; Chroot to this directory at the start. This value must be defined as an
    ; absolute path. When this value is not set, chroot is not used.
    ; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
    ; of its subdirectories. If the pool prefix is not set, the global prefix
    ; will be used instead.
    ; Note: chrooting is a great security feature and should be used whenever
    ; possible. However, all PHP paths will be relative to the chroot
    ; (error_log, sessions.save_path, ...).
    ; Default Value: not set
    ;chroot =
    ; Chdir to this directory at the start.
    ; Note: relative path can be used.
    ; Default Value: current directory or / when chroot
    ;chdir = /srv/http
    ; Redirect worker stdout and stderr into main error log. If not set, stdout and
    ; stderr will be redirected to /dev/null according to FastCGI specs.
    ; Note: on highloaded environement, this can cause some delay in the page
    ; process time (several ms).
    ; Default Value: no
    ;catch_workers_output = yes
    ; Limits the extensions of the main script FPM will allow to parse. This can
    ; prevent configuration mistakes on the web server side. You should only limit
    ; FPM to .php extensions to prevent malicious users to use other extensions to
    ; exectute php code.
    ; Note: set an empty value to allow all extensions.
    ; Default Value: .php
    ;security.limit_extensions = .php .php3 .php4 .php5
    security.limit_extensions = .php .html
    ; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
    ; the current environment.
    ; Default Value: clean env
    ;env[HOSTNAME] = $HOSTNAME
    ;env[PATH] = /usr/local/bin:/usr/bin:/bin
    ;env[TMP] = /tmp
    ;env[TMPDIR] = /tmp
    ;env[TEMP] = /tmp
    ; Additional php.ini defines, specific to this pool of workers. These settings
    ; overwrite the values previously defined in the php.ini. The directives are the
    ; same as the PHP SAPI:
    ; php_value/php_flag - you can set classic ini defines which can
    ; be overwritten from PHP call 'ini_set'.
    ; php_admin_value/php_admin_flag - these directives won't be overwritten by
    ; PHP call 'ini_set'
    ; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
    ; Defining 'extension' will load the corresponding shared extension from
    ; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
    ; overwrite previously defined php.ini values, but will append the new value
    ; instead.
    ; Note: path INI options can be relative and will be expanded with the prefix
    ; (pool, global or /usr)
    ; Default Value: nothing is defined by default except the values in php.ini and
    ; specified at startup with the -d argument
    ;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f [email protected]
    ;php_flag[display_errors] = off
    ;php_admin_value[error_log] = /var/log/fpm-php.www.log
    ;php_admin_flag[log_errors] = on
    ;php_admin_value[memory_limit] = 32M
    In php-fpm.conf I have modified the permissions to be 0666 and I am still hitting the no such file or directory. But it is created.
    ls -la /run/php-fpm/
    total 4
    drwxr-xr-x 2 root root 80 Mar 7 13:05 .
    drwxr-xr-x 17 root root 520 Mar 7 10:59 ..
    -rw-r--r-- 1 root root 4 Mar 7 13:05 php-fpm.pid
    srw-rw-rw- 1 http http 0 Mar 7 13:05 php-fpm.sock
    Not getting what I am missing here, can someone help shed some light or smack me in the correct direction. Thanks.
    edit:
    Also verified that it is for sure running in the chroot
    ps -C nginx | awk '{print $1}' | sed 1d | while read -r PID; do ls -l /proc/$PID/root; done
    lrwxrwxrwx 1 root root 0 Mar 7 14:06 /proc/313/root -> /srv/http
    lrwxrwxrwx 1 http http 0 Mar 7 14:06 /proc/314/root -> /srv/http
    edit2:
    I just rebooted the box and was going over everything again to see if I missed anything or anything was not matching the wiki and the only extra info I could dig out of my box was new error in the logs relating to the nginx.pid
    2013/03/07 18:10:41 [notice] 411#0: signal process started
    2013/03/07 18:10:41 [alert] 387#0: unlink() "/run/nginx.pid" failed (13: Permission denied)
    ls -la /srv/http/run/
    total 12
    drwxr-xr-x 2 root root 4096 Mar 7 14:02 .
    d--x--x--x 9 root root 4096 Mar 7 11:07 ..
    -rw-r--r-- 1 http http 4 Mar 7 18:12 nginx.pid
    It appears to have the proper permissions and it is not in /run/
    ls -la /run/nginx.pid
    ls: cannot access /run/nginx.pid: No such file or directory
    Going to try setting it up again on another box to see if I catch what I did wrong on this one, but will be leaving this one as is to make sure I figure out what happened. Is it that my chroot is bad? That is really the only thing I can think of that is really any different than other NGINX installs I have done, which have always been on a Debian based system.
    Last edited by vwyodajl (2013-03-07 18:24:55)

    Might sound stupid, but do you have php-fpm running?
    Means, is there a php-fpm process on your box, and does the socket exist like in:
    └» ps -ef|grep php-fpm
    root 3045 1 0 Mär04 ? 00:00:09 php-fpm: master process (/etc/php/php-fpm.conf)
    http 13534 3045 0 18:22 ? 00:00:10 php-fpm: pool www
    http 13545 3045 0 18:22 ? 00:00:08 php-fpm: pool www
    http 22807 3045 0 19:46 ? 00:00:01 php-fpm: pool www
    tom 27863 28055 0 20:16 pts/1 00:00:00 grep --colour=auto php-fpm
    └» ls -l /run/php-fpm/php-fpm.sock
    srw-rw---- 1 http http 0 4. Mär 22:24 /run/php-fpm/php-fpm.sock
    EDIT: somehow missed your output regarding the php-fpm socket. Ignore above then, I have no idea about chroot, I use LXC.
    Last edited by teekay (2013-03-07 19:24:04)

Maybe you are looking for

  • Error Message in Field Exit

    Hi All, We have a FM which throws an error message. When that is executed in report, it works fine and the error message is displayed. We have implemented this FM in FIELD EXIT for PRCTR. But it is not throwing any message. We checked the data, it is

  • Keyboard not working properly

    Hi there, I have problem with my keyboard since yesterday. For certain letters or numbers by pressing them it types several characters. I didnt spil liquid on it and i cleanead it from dust and crumbs. Letters are not in the same area on keyboard. I

  • How to find latest entry in the table according to time

    how to find latest entry in the table according to the time is there any function module to do so \[removed by moderator\] Regards Shashi Edited by: Jan Stallkamp on Aug 25, 2008 4:39 PM

  • External Apple logo shows through to display

    I just returned to my iBook after 5 minutes (the time I have set to have the display turn off) to find that there is the vague outline of the Apple logo (the illuminated one on the outside over of the iBook) showing through to the display. It is a fu

  • Wireless Keyboard hangs iPad when composing email

    I, like most people, use the option key plus arrows in order to move through words and paragraphs quickly when editing text or composing an email. Several times I've been halfway through writing a long email and pressed an option+arrow combo only to