Fractional sting to decimal number conversion

Hi!
I want to convert my fractional string to number in the following format. I want to restrict number after 3 decimal. Can anybody help.
My fractional string - 123.456789 i want number - 123.456
- 12.123456 - 12.123
- 123456.123456 - 123456.123
Kaustubh
VC (Pune)
INDIA

Check this out
The attached VI allows # of decimal point control
Cheers!
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com
Attachments:
IFK_STR_StrNum2Num(SetDecPoint).vi ‏16 KB

Similar Messages

How to convert fractional decimal number to hex number?

Hi,
Can any one help me to convert the fractional decimal number to its equivalent hex number and vice versa ?
if u have any code please share.
thanks
neethu

neethukk wrote:
Can any one help me to convert the fractional decimal number to its equivalent hex number and vice versa ?
if u have any code please share.
This question is not clear at all.
"Fractional decimal" is not a data type, but a way of formatting in readable form using numeric characters and a decimal separator.
Same to "hex number", but only for integers.
What do you mean by "convert"? Do you want to keep the value the same or retain the bit pattern of the numeric data type?
Hexadecimal is for integers. Are you talking about fixed point?
We clearly need significantly more information. What are the input and output data types? What are you actually trying to do?
Do you have an example input and corresponding output?
LabVIEW Champion . Do more with less code and in less time .

Conversion of decimal number

hi,
how to convert a decimal number
suppose i want to convert 500.00- to 500.
plz help me in resolving this.

Hi Ramya,
You can use Field symbol with CASTING operator to convert decimal to Numeric Type (Intergers). You can try with other Numeric type also.
data:wf_int type i,
wf_dec(10) type x.
field-symbols: <fs> type any.
wf_dec = '28'.
assign wf_dec to <fs> casting type i.
wf_int = <fs>.
write wf_int.
kindly reward if helpful.
cheers,
Hema.

Integer and fractional part of the number

Hello everybody,
I want to divide the floating point number to 2 integer words, first will receive the interger part of number, and the second will receive the fractional part of the number.
For example: I have number 751.98 in DBL, then I create two integer fields: first has value 751, second has value 98.
I have tried simple conversion from DBL to I16, but it always rounded me to higher interger. I don't want to round it. And I just don't know how to transform the fractional part to integer. Are there any specialized functions for this? Maybe should I use log10 or similar?
TIA,
Jacek.

The place to start with this problem is the IEEE-754 numerical
representations:
32 bit floating point is internally:
highest order bit is the sign bit.
the next 8 bits are the exponent bits
the last 23 bits are the mantissa bits
the mantissas and exponents are binary.
the mantissa value in a 1.22 fixed point binary number, i.e. the most
significant binary bit is equal to 1, the next most is equal to 1/2,
the next most is equal to 1/4, etc., etc.
The exponent part can go between 2^-127 and 2^128
You should be able to cast your 32 bit float to a 32 bit unsigned
integer, separate it into sign, mantissa and exponent parts, use the
exponent to rotate left or right your mantissa decimal point by the
exponent value and then separate the whole part from the fractional
part and then put each into the I16's or U16's as you want.
Douglas De Clue
LabVIEW programmer
[email protected]
[email protected] (Michael Ross) wrote in message news:...
> This problem needs some limits. Like: only return the decimal portion
> out to 6 places.
>
> First run the number through Remainder and Quotient (divisor of 1).
>
> 751.98743674645641000000 gets remainder of
>
> 0.98743674645641021900
>
> "floor" is 751
>
> Take the remainder and send through Decimal to Fractional String (this
> is where you set your number of decimal places [default is 6]).
>
> returns 0.987437
>
> Then use String Subset and set it to an offset of 2 (cleans off the
> leading zero and decimal point) with the "length" input left at the
> default of "rest" (of string).
>
> 987437 (in string form)
>
> Now use String to Decimal Number
>
> returns 987437 (as a decimal number)
> ====================================
> I think if you don't limit the number of places it is ugly. It is
> ugly going from numbers to strings and then back. But all numbers is a
> bad thing.
>
> The alogirithm for finding the answer mathematically is nasty.
> Especially without a limit on decimal places. You have to figure out
> the number of decimal places and multiply by the inverse of the last
> decimal place. Sounds easy.
> =============================
> Try this: New number: 751.98652
>
> Truncate out the remainder (Remainder and Quotient (divisor of 1)):
>
> 751.98652 ---> 0.98652
>
> Mult by 10 ----> 9.8652
>
> Take the floor (9) and divide by 10 ----> 0.9
>
> subtract the new number from the old. Is the answer non-zero? Not,
> then keep on
>
> 0.98652 - 0.9 = .08652 which not equal to 0
>
> If it is zero, the floor is the answer.
>
> Continue - Not:
>
> This time multiply by 100 ----> 98.652
>
> floor is 98, divide by 100 ----> 0.98
>
> Subtract 0.98 from 0.98652 = .00652 still non zero.
>
> Keep on. 1,000, 10,000...When you get to 100,000
>
> 0.98652 x 100,000 = 98652.00
>
> Get the floor
>
> divide the floor by 100,000 to get the original number (remainder is
> now 0.000), compare to original remainder
>
> 0.98652 - 0.98652 = 0. Yay.
>
> Take the 98652 and go with it. The last place was the one hundred
> thousandth.
>
> I can't take credit for the last, I had uglier stuff going on. I did
> do the string thing.
>
> I swear this is just like some sorry homework problem.
>
> Mike

Re: Error, numeric or value error: character to number conversion error

Can someone please please tell me why I'm getting this error and what I'm doing wrong? It looks like a simple error, "numeric or value error: character to number conversion error".
My code is as follows:
string connectionString = WebConfigurationManager.ConnectionStrings["DEMO_TEST"].ConnectionString;
OracleConnection con = new OracleConnection(connectionString);
OracleCommand cmd = new OracleCommand("DEMO.PKG_LOCATION_TYPE.INS", con);
cmd.CommandType = CommandType.StoredProcedure;
cmd.Parameters.Add(new OracleParameter("@P_DESCRIPTION", OracleDbType.Varchar2, 60));
cmd.Parameters["@P_DESCRIPTION"].Value = "Test_Description";
cmd.Parameters.Add(new OracleParameter("@P_NAME", OracleDbType.Varchar2, 6));
cmd.Parameters["@P_NAME"].Value = "Test_Name";
cmd.Parameters.Add(new OracleParameter("@P_LOCATION_TYPE_CD", OracleDbType.Decimal, 4));
cmd.Parameters["@P_LOCATION_TYPE_CD"].Direction = ParameterDirection.InputOutput;
con.Open();
try
cmd.ExecuteNonQuery();
catch
//In case of an error
finally
con.Close();
con.Dispose();
And I recieve the following error block:
Oracle.DataAccess.Client.OracleException was unhandled by user code
Message="ORA-06502: PL/SQL: numeric or value error: character to number conversion error\nORA-06512: at line 1"
Source="Oracle Data Provider for .NET"
DataSource="demotest"
Number=6502
Procedure="DEMO.PKG_LOCATION_TYPE.INS"
StackTrace:
at Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, String procedure)
at Oracle.DataAccess.Client.OracleException.HandleError(Int32 errCode, OracleConnection conn, String procedure, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src)
at Oracle.DataAccess.Client.OracleCommand.ExecuteNonQuery()
at System.Web.UI.WebControls.Wizard.OnFinishButtonClick(WizardNavigationEventArgs e)
at System.Web.UI.WebControls.Wizard.OnBubbleEvent(Object source, EventArgs e)
at System.Web.UI.WebControls.Wizard.WizardChildTable.OnBubbleEvent(Object source, EventArgs args)
at System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args)
at System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
********************************************************

Are the parameters in your procedure in the same order as they are created in this code? Oracle command works by position unless you change it to be BindByName.
Failing that you seem to have defined a parameter (P_NAME) to have a length of 6, and are then setting it's value to a string with a length of 9.
Also the in/output parameter is defined as type decimal. Is this correct? It is defined as InputOutput but you don't assign it any value.
If these suggestions don't help then perhaps if you post the stored procedure you might get some more ideas.
HTH
Lyndon

DECIMAL = HEX CONVERSION PACKAGE 생성 SCRIPT

제품 : SQL*PLUS
작성날짜 : 2002-04-12
DECIMAL <=> HEX CONVERSION PACKAGE 생성 SCRIPT
==============================================
Purpose
Oracle내에서는 여러가지 값을 HEX 값으로 보여주는 경우가 있다.
이런 경우 DB내에서 decimal 값으로 변환하기 위한 방법을 알아보자.
Explanation
다음은 decimal <=> hexa 의 conversion을 위한 package 생성문으로서
system user로 수행하여 사용한다.
create or replace package support as
function dectohex (a number) return varchar2;
pragma restrict_references
(dectohex, WNDS, WNPS, RNDS, RNPS);
function hextodec (a varchar2) return number;
pragma restrict_references
(hextodec, WNDS, WNPS, RNDS, RNPS);
end support;
create or replace package body support as
FUNCTION hextodec(a IN VARCHAR2) RETURN NUMBER IS
x NUMBER := 0;
y NUMBER;
z VARCHAR2(1);
BEGIN
IF length(a) > 8 THEN
RAISE invalid_number;
END IF;
FOR i IN 1..length(a) LOOP
z := upper(substr(a,i,1));
IF z = 'A' THEN
y := 10;
ELSIF z = 'B' THEN
y := 11;
ELSIF z = 'C' THEN
y := 12;
ELSIF z = 'D' THEN
y := 13;
ELSIF z = 'E' THEN
y := 14;
ELSIF z = 'F' THEN
y := 15;
ELSE
y := to_number(z,9);
END IF;
x := x * 16;
x := x + y;
END LOOP;
RETURN x;
END hextodec;
FUNCTION dectohex(a IN NUMBER) RETURN VARCHAR2 IS
x VARCHAR2(8) := '';
y VARCHAR2(1);
z NUMBER;
w NUMBER;
BEGIN
IF a > power(2,32) OR a < 0 THEN
RAISE invalid_number;
END IF;
w := a;
WHILE w > 0 LOOP
z := w mod 16;
IF z = 10 THEN
y := 'A';
ELSIF z = 11 THEN
y := 'B';
ELSIF z = 12 THEN
y := 'C';
ELSIF z = 13 THEN
y := 'D';
ELSIF z = 14 THEN
y := 'E';
ELSIF z = 15 THEN
y := 'F';
ELSE
y := to_char(z);
END IF;
w := trunc(w / 16);
x := concat(y,x);
END LOOP;
RETURN x;
END dectohex;
END support;
drop public synonym support;
create public synonym support for system.support;
grant execute on support to public;

FYI: The new xf86-video-intel (2.9) has just been released:
http://article.gmane.org/gmane.comp.fre … xorg/40733
According to the release announcement, the new driver fixes the backlight issue with KMS:
* Add support for BACKLIGHT property when using kernel modesetting
(KMS). This allows backlight adjustment with programs such as
"xbacklight -set <percentage>" or "xrandr --set BACKLIGHT <value>".

How to convet a decimal number of in to base 64.

Hi friends,
my requirement is how to convet a decimal number of in to base 64.
ex:decimal number could be any type 1,1.2,-1,-1.2 etc
i found an API Base64.java but iam not able to use .
Please Help me out.

try this
Typecast your array of integers to Byte[] and use method byteArrayToBase64() as:
String encodeArray = Base64.byteArrayToBase64( new byte[]{ 3, 34, 116, 9 } );Also, browse the below link for more details
http://kickjava.com/src/java/util/prefs/Base64.java.htm
Message was edited by:
Mayank_03

FM for Material number conversion from R/3 to APO in R/3

Hi,
   Can anybody tell me conversion exit (function module) for Material number conversion from R/3 to APO in R/3 system. I mean i have 18 digit R/3 material number which i have to convert to 40 digit APO material number in R/3 system.
Please suggest to win full points.
Thaniks in Advance,
Chandan Dubey

Dear Chandan,
Conversion Exits:
CONVERSION_EXIT_MATN1_INPUT ....... If you are storing Material With Zeros
Then concatenate it with 22 zeros. i.e. '0000000000000000000000000000'.
For example:
data : v_matnr type matnr,            "R/3 Material
       v_apo_matnr(40) type c,        "APO Material with 40 length
       v_zeros(22) type c. value '0000000000000000000000000000'.
CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
       EXPORTING INPUT          = v_matnr
       IMPORTING OUTPUT         = v_matnr.
concatenate e_mantr v_zeros into
            v_apo_matnr.
Regards,
Naveen.

I can't use a decimal number in a update routine

Hi,
I want to use a decimal number in a udate routine (in a updating rule). I've a code similar to this:
IF COMM_STRUCTURE-/BIC/ZSATIAUX1 LT 1,5.
RESULT = 'GOOD'.
And when I save the routine I get the following error:
E:Comma without preceding colon (after IF ?).
The COMM_STRUCTURE-/BIC/ZSATIAUX1 field is numeric field with three decimal positions.
Can anybody tell me why I can't use decimals in my routine?
Thanks in advance.
Regards.

Hi,
Try following code:
Data: Val type COMM_STRUCTURE-/BIC/ZSATIAUX1 .
val = 1.5.
IF COMM_STRUCTURE-/BIC/ZSATIAUX1 LT val.
RESULT = 'GOOD'.
endif.
Regards,
Geetanjali

Error ORA-06502, numeric or value error character to number conversion

I have been trying to create an email including data from a table as part of the body. Whenever I try to send it, I get an error ORA-06502, numeric or value error, character to number conversion. If I take out the part referencing the table, the email will go without error, but if I put it back in I get the error.
There is the code:
DECLARE
v_email_body CLOB;
v_from_email_address VARCHAR2(100) := v('APP_USER');
v_id NUMBER;
BEGIN
v_email_body := 'Please pay the attached invoice from FY '||:P14_FY||' funds
Date: '||:P14_PURCHASE_DATE||'
Vendor: '||:P14_VENDOR||'
Invoice Number: '||:P14_INVOICE||'
Invoice Date: '||:P14_INVOICE_DT||'
Due Date: '||:P14_INVOICE_DUE_DT||'
KSR Number: '||:P14_KSR||'
DTS PO: '||:P14_DTS_PO||'
FINANCE DO: '||:P14_FINANCE_PO||'
FOR detail IN(SELECT OB_CODE
FROM BUDGET_USED
WHERE P_ID = :P14_ID)
v_email_body := v_email_body||detail.OB_CODE||utl_tcp.crlf;
LOOP
FOR detail2 IN (SELECT ob_code, amount
FROM budget_used
WHERE p_id = :P14_ID)
LOOP
v_email_body := v_email_body||detail2.ELCID||' - '||detail2.AMOUNT||utl_tcp.crlf;
END LOOP;
END LOOP;
v_email_body := v_email_body
'||:P14_EMAIL_NOTES||'
Thanks.
v_id := APEX_MAIL.SEND
(p_to => :P14_SUBMIT_TO
,p_cc => v('APP_USER')
,p_bcc => '[email protected]'
,p_from => v_from_email_address
,p_body => v_email_body
,p_subj => 'Invoice, '||:P14_VENDOR||', '||:P14_INVOICE||'');
--Having set up your email, now add one (or more) attachments...
FOR c1 in (SELECT FILENAME
,BLOB_CONTENT
,MIME_TYPE
FROM file_subjects f, apex_application_files a
where a.name = f.name
and f.P_ID = :P14_ID) LOOP
IF c1.blob_content IS NOT NULL THEN
APEX_MAIL.ADD_ATTACHMENT( p_mail_id => v_id,
p_attachment => c1.blob_content,
p_filename => c1.filename,
p_mime_type => c1.mime_type);
END IF;
END LOOP;
END;
Apex_mail.push_queue();
This is important to my company to be able to put this data into an email. If anyone can help me, I would greatly appreciate it. Thank you in advance.

Lets isolate the erroring line by running the code in debug mode and adding some debug lines at various stages in the code
Apex has a builtin function named wwv_flow.debug which can print messages to the debug stack and would be visible when the page is run in debug mode.
DECLARE
v_email_body CLOB;
v_from_email_address VARCHAR2(100) := v('APP_USER');
v_id NUMBER;
BEGIN
wwv_flow.debug('BEGIN');
v_email_body := 'Please pay the attached invoice from FY '||:P14_FY||' funds
Date: '||:P14_PURCHASE_DATE||'
Vendor: '||:P14_VENDOR||'
Invoice Number: '||:P14_INVOICE||'
Invoice Date: '||:P14_INVOICE_DT||'
Due Date: '||:P14_INVOICE_DUE_DT||'
KSR Number: '||:P14_KSR||'
DTS PO: '||:P14_DTS_PO||'
FINANCE DO: '||:P14_FINANCE_PO||'
'||:P14_EMAIL_NOTES||'
Thanks.
wwv_flow.debug('Before sending mail');
v_id := APEX_MAIL.SEND
(p_to => :P14_SUBMIT_TO
,p_cc => v('APP_USER')
,p_bcc => '[email protected]'
,p_from => v_from_email_address
,p_body => v_email_body
,p_subj => 'Invoice, '||:P14_VENDOR||', '||:P14_INVOICE||'');
wwv_flow.debug('Before attachements');
--Having set up your email, now add one (or more) attachments...
FOR c1 in
         (SELECT FILENAME
        ,BLOB_CONTENT
        ,MIME_TYPE
        FROM file_subjects f, apex_application_files a
        where a.name = f.name
        and f.P_ID = :P14_ID)
LOOP
    IF c1.blob_content IS NOT NULL THEN
    APEX_MAIL.ADD_ATTACHMENT( p_mail_id => v_id,
    p_attachment => c1.blob_content,
    p_filename => c1.filename,
    p_mime_type => c1.mime_type);
    END IF;
END LOOP;
wwv_flow.debug('Finished attachements');
Apex_mail.push_queue();
END;What is the last message you see in the debug after running the page in debug mode and submitting it ?

Numeric or value error: character to number conversion error

I'm having problems inserting a value from a date picker field (DD-MON-YYYY HH MI )
i'm submitting this value to a packaged procedure that accepts this field as VARCHAR2 .
on the insert, i do a to_date( P_DATE, 'DD-MON-YYYY HH:MI PM' )
and i get the numeric conversion error.
If I change the to_date on the procedure side, I get the :could not read the end of the format mask - which I've found threads about on this site.
I've tried using HH24 and different formats, but I get one of the two above errors on the insert.
If I don't fill in the datepicker field at all, it works fine.
help is appreciated !
Bill

Here is the trace anyway:
*** ACTION NAME:(application 4000, page 1) 2004-09-24 12:58:44.052
*** MODULE NAME:(HTML DB) 2004-09-24 12:58:44.052
*** SERVICE NAME:(TOPS) 2004-09-24 12:58:44.052
*** SESSION ID:(151.1) 2004-09-24 12:58:44.052
*** 2004-09-24 12:58:44.052
ksedmp: internal or fatal error
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
Current SQL statement for this session:
declare
rc__ number;
begin
owa.init_cgi_env(:n__,:nm__,:v__);
htp.HTBUF_LEN := 255;
null;
null;
null;
null;
f(p=>:p);
if (wpg_docload.is_file_download) then
rc__ := 1;
wpg_docload.get_download_file(:doc_info);
null;
null;
null;
commit;
else
rc__ := 0;
null;
null;
null;
commit;
owa.get_page(:data__,:ndata__);
end if;
:rc__ := rc__;
end;
----- PL/SQL Call Stack -----
object line object
handle number name
6A3C4A00 532 package body FLOWS_010500.WWV_FLOW_UTILITIES
6A3C4A00 2502 package body FLOWS_010500.WWV_FLOW_UTILITIES
6A3C4A00 2748 package body FLOWS_010500.WWV_FLOW_UTILITIES
6A0E63C8 991 package body FLOWS_010500.WWV_FLOW_FORMS
6A11675C 932 package body FLOWS_010500.WWV_FLOW_DISP_PAGE_PLUGS
6A11675C 247 package body FLOWS_010500.WWV_FLOW_DISP_PAGE_PLUGS
6A4B54E0 8341 package body FLOWS_010500.WWV_FLOW
6A2A99F0 102 procedure FLOWS_010500.F
6A2B9E54 10 anonymous block
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
ksedmp+524          CALLrel ksedst+0 1
ksedmptracecb+15 CALLrel _ksedmp+0            C
_ksddoa+118          CALLreg 00000000             C
ksdpcg+143          CALLrel ksddoa+0
ksdpec+180          CALLrel ksdpcg+0 1966 6D7D208 1
__PGOSF3__ksfpec+11 CALLrel _ksdpec+0            0
8
_kgerev+77           CALLreg 00000000             7474210 1966
kgerec1+18          CALLrel kgerev+0 7474210 6DCE5EC 1966 1
6D7D260
peirve+465          CALLrel kgerec1+0
pevmCVTCN+346 CALLrel _peirve+0
pfrinstrCVTCN+36 CALLrel pevmCVTCN+0 6E6E604 71CE370 7160F0C
pfrrunno_tool+51 CALL??? 00000000
pfrrun+1834         CALLrel pfrrun_no_tool+0 6E6E604 6A3C010A 6E6E640
plsqlrun+1051 CALLrel _pfrrun+0            6E6E604
peicnt+179          CALLrel plsql_run+0 6E6E604 1 0
kkxexe+477          CALLrel peicnt+0
opiexe+4896         CALLrel kkxexe+0 6A2B9E54
kpoal8+1705         CALLrel opiexe+0 49 3 6D7E06C
_opiodr+977          CALLreg 00000000             5E 14 6D7E7CC
_ttcpip+1827         CALLreg 00000000             5E 14 6D7E7CC 0
_opitsk+1098         CALL??? 00000000
opiino+938          CALLrel opitsk+0 0 0 747ABC0 6DEFB14 D8 0
_opiodr+977          CALLreg 00000000             3C 4 6D7FBBC
opidrv+479          CALLrel opiodr+0 3C 4 6D7FBBC 0
sou2o+45            CALLrel opidrv+0 3C 4 6D7FBBC
opimai+237          CALLrel sou2o+0
OracleThreadStart@ CALLrel opimai+0
4+899
77E7D338 CALLreg 00000000

Comma or point in decimal number

Hi,
I wonder how to handle decimal number input from jsp page with comma or point. Is there a way to take care of this automatic so a comma get parsed to a point or vice versa.
Thanks in advance.

I don't know if it will be a comma or a dot that is inputed. My keyboard uses a comma on the numeric pad but if i change it to a US keyboard it will use dot instead so I can't tell what a user will input. And if I understand everything when java calculates a double it has to be with a dot, or am I completly wrong.
So with this in mind i decided to replace all dots with a comma and then parse it to a double with NumberFormat and do my calculation and then format it with NumberFormat again. This works fine and gives me a nice output if no one tries to input more than one point or comma.
I can't think of another way to do it so if this is completly wrong so please point me in the right direction.

PL/SQL: numeric or value error: character to number conversion error in TRG

Hi,
I've got strange issue with one trigger which during update of table reports (DB is 9.2.0.8):
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
ORA-06512: at "UDR_LOG", line 345
ORA-04088: error during execution of trigger 'UDR_LOG'but line 345 is:
END IF;
so its kind of strange
the code looks like
343 IF nvl(to_char(:old.PKD_ID),'''') <> nvl(to_char(:new.PKD_ID),'''') THEN
344 v_zmn := v_zmn || 'PKD_ID''' || to_char(:old.PKD_ID) || '''' || to_char(:new.PKD_ID) || '''';
345 END IF;
so its concatenation not to_number usage .error is triggered by update statement on any column .
I'm sorry I cant provide You with whole trigger code .
So if You could only recommend any investigation method that would be great .
Regards
Greg

Hi, Greg,
When there's an error in a trigger, the line numbers in the error messages are relative to the first DECLARE or BEGIN statement; often, that's a few lines after CREATE OR REPLACE TRIGGER. Post a few lines after what you already posted.
If you can't find the error, then create another table for testing this, and create a smaller trigger on that table, which does only enough to cause the error. Then you'll be able to post the complete trigger, and the code needed to re-create the problem.

ORA-06502: PL/SQL: numeric or value error: character to number conversion e

Hi,
when I do same thing in my procedure it throws below error but it works fine as annonymus block.
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
CREATE TABLE test_table
(memberid NUMBER,
trans_date date);
DECLARE
v_num number(10,0);
v_text varchar2(100);
begin
v_text := '123456abcdef';
v_num := substr(v_text,1,5);
INSERT INTO test_table
(memberid,
trans_DATE)
VALUES
(v_num,
sysdate);
end;Thanks
Sandhya

Works fine as a procedure as well;
SQL> DECLARE
2 v_num number(10,0);
3 v_text varchar2(100);
4 begin
5 v_text := '123456abcdef';
6 v_num := substr(v_text,1,5);
7 INSERT INTO test_table
8 (memberid,
9 trans_DATE)
10 VALUES
11 (v_num,
12 sysdate);
13 end;
14
15 /
PL/SQL procedure successfully completed.
SQL> select * from test_table;
MEMBERID TRANS_DAT
     12345 20-MAY-10
SQL> create or replace procedure ins_test_table as
2
3    v_num number(10,0);
4 v_text varchar2(100);
5 begin
6 v_text := '123456abcdef';
7 v_num := substr(v_text,1,5);
8 INSERT INTO test_table
9 (memberid,
10 trans_DATE)
11 VALUES
12 (v_num,
13 sysdate);
14
15 end ins_test_table;
16 /
Procedure created.
SQL>
SQL> exec ins_test_table;
PL/SQL procedure successfully completed.
SQL> select * from test_table;
MEMBERID TRANS_DAT
     12345 20-MAY-10
     12345 20-MAY-10

"Settings for material number conversion not found" occurs when ...

After I run an initial load data into the InfoCube 0PUR_C01, I want to check the InfoCube Content by the following path:
RSA1 -> pick up the InfoCube 0PUR_C01, right click it and select Manage -> Get to Content tab -> Click InfoCube Content button -> Deselect all selection, only tick the 1st column checkbox next to 0Material, then hit enter, get a small window titled as "Cancel" with a red STOP msg sysing "Settings for material number conversion not found" with an "Exit" button and a question mark button, click Exit button leads to SAP Easy Access screen, if clicking the question mark button, another window pops up with the msg showed above, click Technical Information button causes the original window short dump and the short dump msg shows below in between two dashed lines:
Runtime Errors         RPERF_ILLEGAL_STATEMENT
Date and Time          11/28/2005 14:43:13
ShrtText
    Statement "CALL SCREEN" is not allowed in this form.
What happened?
    Error in ABAP application program.
    The current ABAP program "SAPLSHL2" had to be terminated because on
    statements could not be executed.
    This is probably due to an error in the ABAP program.
Error analysis
    There is probably an error in the program
    "SAPLSHL2".
    The program was probably called in a conversion exit
    or in a field exit. These are implemented by
    function modules called CONVERSION_EXIT_xxxxx_INPUT/OUTPUT or
    USER_EXIT_xxxxx_INPUT.
    Conversion exits are triggered during screen field transports or
    WRITE statements, field exits during field transports from the
    screen to the ABAP/4 program.
    In this connection, the following ABAP/4 statements are not allowed:
    - CALL SCREEN
    - CALL DIALOG
    - CALL TRANSACTION
    - SUBMIT
    - MESSAGE W... and MESSAGE I...
    - COMMIT WORK, ROLLBACK WORK
    - COMMUNICATION RECEIVE
    - STOP
    - REJECT
    - EXIT FROM STEP-LOOP
    Moreover, conversion exits for output conversion
    (implemented by function modules called
    CONVERSION_EXIT_xxxxx_OUTPUT) do not allow
    - MESSAGE E...
    to be used.
Trigger Location of Runtime Error
Program                                 SAPLSHL2
Include                                 LSHL2F19
Row                                     3
Module type                             (FORM)
Module Name                             TECHNISCHE_INFO5
rce Code Extract
e SourceCde
1 ***INCLUDE LSHL2F19 .
2 form technische_info5.
>>   call screen 1900 starting at 5 8.
4 endform.
5
6 &----
7 *&      Form SHRINK_VALUES
8 &----
9 *       text                                                           *
10 ----
11 * --> p1        text
12 * <-- p2        text
13 ----
14 form shrink_values.
15
16   loop at dynpselect.
17     clear checktable.
18     if dynpvaluetab-lowvalue ne space and dynpvaluetab-lowvalue na '*'.
19       move 'EQ' to checktable-op.
20       move dynpvaluetab-lowvalue to checktable-low_value.
21       append checktable.
22     endif.
What could cause the problem by selecting only 0Material when checking the InfoCube 0PUR_C01 content? What does that mean by this STOP msg "Settings for material number conversion not found"?
Thanks

Hi Kevin,
Set the length of 0MATERIAL and change conversion to alpha:
Re: Error Installing 0MATERIAL from Business Content
Best regards,
Eugene

Fractional sting to decimal number conversion

Similar Messages

Maybe you are looking for