FrameMaker 10 - Finding all graphics in a book with a Object Properties Scaling equal to 0%?

Is there a way in FrameMaker 10 in the book to quickly find all imported graphics (.bmp, .cgm, .jpg, & .wmf) that are out-of-aspect ratio or where the Object Properties Scaling equals 0%?
I import a lot of graphic (around a 100 or so) in FrameMaker 10 and I would like to be reassured that all imported graphic have the correct aspect ratio, and find any that are wrong quickly.
I would like to be able to do this search in the Book format rather than each section.
Is there a way to do this?
Thanks!

Denis, this would require scripting. ExtendScript would likely be the first choice and would be perfect for the job. Given that you want to operate on the whole book at once, the script would be a little bit longer, so you might not get someone to post it here for free. I would consider it because it would be a nice addition to the samples on my website, but I can't do it right this minute. If no one offers for free, hit me up in a day or two and I might be able to accommodate you.
One question though... are you really looking to verify the aspect ratio? This could be a considerably more complicated task. FrameMaker doesn't save the original ratio, so you would need to reimport the graphic into some other scratchpad area, calculate the aspect ratio, then compare it to the place of reference. I'm not sure that I could go that far.
Alex, I think you may have misunderstood the question. Also, it's not even clear if these are structured files, and if so, if there is a structured application to save as XML.
Russ

Similar Messages

How to find all tables that are associated with a given domain name.

I want to find all table, excluding the structures, of a given domain name, say, waers.
Some of the tables are directly contains the domains while others are related with a data element which is connected to that domain.
I want to find tables for all two case -either tables connected directly to the domain or connected via data element- and exclude the structures.
thanks in advance.

Hi,
The following thing may help you.
in se11-> search for tables having names like 'DD*'.
From this list of tables you can find the required table to get domain, data element nad table name.
one way of doing it:
SELECT rollname domname
FROM dd04l
INTO CORRESPONDING FIELDS OF TABLE it_tab.
SELECT rollname tabname
FROM dd03l
INTO CORRESPONDING FIELDS OF TABLE it_tab1
FOR ALL ENTRIES IN it_tab
WHERE rollname = it_tab-rollname.
SORT it_tab1.
DELETE ADJACENT DUPLICATES FROM it_tab1.
LOOP AT it_tab1 INTO wa_tab.
MODIFY it_tab FROM wa_tab
TRANSPORTING tabname
WHERE rollname = wa_tab-rollname.
ENDLOOP.
LOOP AT it_tab INTO wa_tab.
WRITE:/ wa_tab-domname,
wa_tab-tabname.
ENDLOOP.
Regards,
Manoj Kumar P

TS1702 how do i find all passwords i have used with my apple id

how do i find all passwords that i have used for my apple id

Other than remembering them, you can't.

Read graphic Object properties 'scaling'

Hi all,
I am trying to read 'scaling' graphic Object properties values using in below code. In case graphic having 60% that time also I am getting only 100%. So can I get some help? Thank you very much.
function CheckScaing(doc)
   graphicObj = doc.FirstGraphicInDoc;
while(graphicObj.ObjectValid())
        graphicObj = graphicObj.NextGraphicInDoc;
              if(graphicObj.type == Constants.FO_Inset)
                  name = graphicObj.InsetFile;
                  var insetDpis=graphicObj.InsetDpi
                  alert(insetDpis)

Hello,
There is no available built-in concerning the graphic objects displayed on the canvas. All you can do use another stacked canvas to show/hide the graphic objects located on it.
Francois

SQL query to find all suites that are associated with automation

I trying to incorporate CodeUI tests into a Release Mangement deployment template ... As a developer, I want to be able to specify a sub-tree of a test plan & only execute those test suites that are associated with automation. Is there a way to
extract all automated workitems and associated them with their respective test suites?
Any assistance would be greatly appreciated!

John,
I've partially resolved the issue of executing a sub-set of suites with the following powershell implementation:
1. Extract "potential" suite paths from a XML configuration file:
<?xml version="1.0"?>
<Configurations>
<Properties>
<Property key="DEFAULT" value="SuitePaths" />
<Property key="DatabaseServer" value="MYDBSERVER" />
<Property key="DatabaseInstance" value="Default" />
<Property key="DatabaseName" value="TFS_DefaultCollection" />
<Property key="ConfigurationName" value="US - Windows 7 and IE 10" />
</Properties>
<Notifications>
<Notification key="0" value="[email protected]" />
</Notifications>
<SuitePaths>
<SuitePath key="0" value="MyProject\WebProduct\Student\Features\Login" />
<SuitePath key="1" value="MyProject\WebProduct\Student\Features\Logout" />
</SuitePaths>
<AreaPaths>
<AreaPath key="0" value="MyProject\WebProduct\Student\Features\Login" />
</AreaPaths>
</Configurations>
2. Extract record set of suites from TFS via SQL query:
# FUNCTION: Retrieve-SuitePaths
# Parameters:
# (1.) LogFile -- Name of log file (e.g., C:\Temp or C:\Temp\DEPLOY_DatabaseServer_WebCMS2_DF06_20131031.6.log)
# (2.) Connection -- Database connection
# (3.) Paths -- Hash table of suite paths
Function Retrieve-SuitePaths
param
[Parameter(Mandatory=$True)][String]$LogFile,
[Parameter(Mandatory=$True)]$Connection,
[Parameter(Mandatory=$True)]$Paths
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
Write-Output "Retrieve suite(s): " | Out-File -FilePath $LogFile -Append
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
$SuitePaths = "("
$Counter = 0
foreach ($Key in $Paths.Keys)
if ($Counter -gt 0)
$SuitePaths = $SuitePaths + ", "
$SuitePaths = $SuitePaths + "'" + $Paths.Get_Item($Key) + "'"
$Counter += 1
$SuitePaths = $SuitePaths + ")"
# --DEBUG ONLY--> Write-Output "Paths: $SuitePaths" | Out-File -FilePath $LogFile -Append
$Command = New-Object System.Data.SqlClient.SqlCommand
$SQLStatement = "
WITH
cte_SuiteChildren
AS
-- Anchor definition to pull all certify modes
SELECT
S.[SuiteId],
S.[ProjectId],
PJ.ProjectName,
S.[PlanId],
P.[Name] AS PlanName,
S.[ParentSuiteId],
S.[SuitePath],
CONVERT(NVARCHAR(256), NULL) AS ParentTitle,
S.[Title],
0 AS RecurseLevel
FROM
[dbo].[tbl_Suite] AS S
INNER JOIN [dbo].[tbl_Plan] AS P ON S.PlanID = P.PlanID
INNER JOIN [dbo].[tbl_Project] AS PJ ON S.ProjectID = PJ.ProjectID
WHERE
S.ParentSuiteID = 0
UNION ALL
-- Recursive member to pull details of certify sessions
SELECT
S.[SuiteId],
S.[ProjectId],
PJ.ProjectName,
S.[PlanId],
P.[Name] AS PlanName,
S.[ParentSuiteId],
S.[SuitePath],
PS.[Title] AS ParentTitle,
S.[Title],
SC.[RecurseLevel] + 1 AS RecurseLevel
FROM
[dbo].[tbl_Suite] AS S
INNER JOIN cte_SuiteChildren AS SC on SC.SuiteID = S.ParentSuiteID
INNER JOIN [dbo].[tbl_Suite] AS PS ON SC.SuiteId = PS.SuiteId
INNER JOIN [dbo].[tbl_Plan] AS P ON S.PlanID = P.PlanID
INNER JOIN [dbo].[tbl_Project] AS PJ ON S.ProjectID = PJ.ProjectID
cte_SuiteLevel_0
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[ProjectName] + '\' + SC.[PlanName] AS Path,
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 0
cte_SuiteLevel_1
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 1
cte_SuiteLevel_2
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 2
cte_SuiteLevel_3
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 3
cte_SuiteLevel_4
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 4
cte_SuiteLevel_5
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 5
cte_SuiteLevel_6
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 6
cte_SuiteLevel_7
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 7
cte_SuiteLevel_8
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 8
cte_SuiteLevel_9
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 9
cte_SuiteLevel_10
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 10
cte_Suites
AS
SELECT
SL0.[ProjectId],
SL0.[PlanId],
CASE
WHEN SL2.ParentSuiteId IS NULL
THEN SL1.ParentSuiteId
ELSE CASE
WHEN SL3.ParentSuiteId IS NULL
THEN SL2.ParentSuiteId
ELSE CASE
WHEN SL4.ParentSuiteId IS NULL
THEN SL3.ParentSuiteId
ELSE CASE
WHEN SL5.ParentSuiteId IS NULL
THEN SL4.ParentSuiteId
ELSE CASE
WHEN SL6.ParentSuiteId IS NULL
THEN SL5.ParentSuiteId
ELSE CASE
WHEN SL7.ParentSuiteId IS NULL
THEN SL6.ParentSuiteId
ELSE CASE
WHEN SL8.ParentSuiteId IS NULL
THEN SL7.ParentSuiteId
ELSE CASE
WHEN SL9.ParentSuiteId IS NULL
THEN SL8.ParentSuiteId
ELSE CASE
WHEN SL10.ParentSuiteId IS NULL
THEN SL9.ParentSuiteId
ELSE SL10.ParentSuiteId
END
END
END
END
END
END
END
END
END AS [ParentSuiteId],
CASE
WHEN SL2.SuiteId IS NULL
THEN SL1.SuiteId
ELSE CASE
WHEN SL3.SuiteId IS NULL
THEN SL2.SuiteId
ELSE CASE
WHEN SL4.SuiteId IS NULL
THEN SL3.SuiteId
ELSE CASE
WHEN SL5.SuiteId IS NULL
THEN SL4.SuiteId
ELSE CASE
WHEN SL6.SuiteId IS NULL
THEN SL5.SuiteId
ELSE CASE
WHEN SL7.SuiteId IS NULL
THEN SL6.SuiteId
ELSE CASE
WHEN SL8.SuiteId IS NULL
THEN SL7.SuiteId
ELSE CASE
WHEN SL9.SuiteId IS NULL
THEN SL8.SuiteId
ELSE CASE
WHEN SL10.SuiteId IS NULL
THEN SL9.SuiteId
ELSE SL10.SuiteId
END
END
END
END
END
END
END
END
END AS [SuiteId],
SL0.ProjectName,
SL0.PlanName,
--SL0.Path,
--SL1.[Title],
CASE
WHEN SL2.Title IS NULL
THEN SL0.Path + '\' + SL1.Title
ELSE CASE
WHEN SL3.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title
ELSE CASE
WHEN SL4.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title
ELSE CASE
WHEN SL5.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title + '\' + SL4.Title
ELSE CASE
WHEN SL6.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title + '\' + SL4.Title + '\' + SL5.Title
ELSE CASE
WHEN SL7.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title + '\' + SL4.Title + '\' + SL5.Title + '\' + SL6.Title
ELSE CASE
WHEN SL8.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title + '\' + SL4.Title + '\' + SL5.Title + '\' + SL6.Title + '\' + SL7.Title
ELSE CASE
WHEN SL9.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title + '\' + SL4.Title + '\' + SL5.Title + '\' + SL6.Title + '\' + SL7.Title + '\' + SL8.Title
ELSE CASE
WHEN SL10.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title + '\' + SL4.Title + '\' + SL5.Title + '\' + SL6.Title + '\' + SL7.Title + '\' + SL8.Title + '\' + SL9.Title
ELSE SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title + '\' + SL4.Title + '\' + SL5.Title + '\' + SL6.Title + '\' + SL7.Title + '\' + SL8.Title + '\' + SL9.Title + '\' + SL10.Title
END
END
END
END
END
END
END
END
END AS Path,
CASE
WHEN SL2.RecurseLevel IS NULL
THEN SL1.RecurseLevel
ELSE CASE
WHEN SL3.RecurseLevel IS NULL
THEN SL2.RecurseLevel
ELSE CASE
WHEN SL4.RecurseLevel IS NULL
THEN SL3.RecurseLevel
ELSE CASE
WHEN SL5.RecurseLevel IS NULL
THEN SL4.RecurseLevel
ELSE CASE
WHEN SL6.RecurseLevel IS NULL
THEN SL5.RecurseLevel
ELSE CASE
WHEN SL7.RecurseLevel IS NULL
THEN SL6.RecurseLevel
ELSE CASE
WHEN SL8.RecurseLevel IS NULL
THEN SL7.RecurseLevel
ELSE CASE
WHEN SL9.RecurseLevel IS NULL
THEN SL8.RecurseLevel
ELSE CASE
WHEN SL10.RecurseLevel IS NULL
THEN SL9.RecurseLevel
ELSE SL10.RecurseLevel
END
END
END
END
END
END
END
END
END AS RecurseLevel
FROM
cte_SuiteLevel_0 AS SL0
LEFT OUTER JOIN cte_SuiteLevel_1 AS SL1 ON SL1.ParentSuiteId = SL0.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_2 AS SL2 ON SL2.ParentSuiteId = SL1.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_3 AS SL3 ON SL3.ParentSuiteId = SL2.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_4 AS SL4 ON SL4.ParentSuiteId = SL3.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_5 AS SL5 ON SL5.ParentSuiteId = SL4.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_6 AS SL6 ON SL6.ParentSuiteId = SL5.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_7 AS SL7 ON SL7.ParentSuiteId = SL6.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_8 AS SL8 ON SL8.ParentSuiteId = SL7.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_9 AS SL9 ON SL9.ParentSuiteId = SL8.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_10 AS SL10 ON SL10.ParentSuiteId = SL9.SuiteId
SELECT
SS.[ProjectId],
SS.[PlanId],
SS.[ParentSuiteId],
SS.[SuiteId],
SS.[ProjectName],
SS.[PlanName],
SS.[Path],
SS.[RecurseLevel]
FROM
SELECT DISTINCT
S.[ProjectId],
S.[PlanId],
S.[ParentSuiteId],
S.[SuiteId],
S.[ProjectName],
S.[PlanName],
S.[Path],
S.[RecurseLevel]
FROM
cte_Suites AS S
WHERE
S.[RecurseLevel] IS NOT NULL
AND S.[Path] IN $($SuitePaths)
) AS SS
ORDER BY
SS.[Path]
$Command.CommandText = $SQLStatement
$Command.Connection = $Connection
$Command.CommandTimeout = 240
$DataAdapter = New-Object System.Data.SqlClient.SqlDataAdapter
$DataAdapter.SelectCommand = $Command
$DataSet = New-Object System.Data.DataSet
$DataAdapter.Fill($DataSet) | Out-Null
Write-Output "$SQLStatement" | Out-File -FilePath $LogFile -Append
# --DEBUG ONLY--> $DataSet.Tables[0]
return $DataSet
3. Execute every suite in the record set via TCM
$DataSet = ( Retrieve-SuitePaths -LogFile:$LogFile -Connection:$Connection -Path:$Paths)
# --DEBUG ONLY--> $DataSet.Tables[0].Rows.Count
# --DEBUG ONLY--> $DataSet.Tables[0]
# Determine whether or not any test suites were retrieved from TFS....
if ( $DataSet.Tables[0].Rows.Count -gt 0 )
$ListTestRunID = $null
$SumFailed = 0
$SumInconclusive = 0
foreach ($Row in $DataSet.Tables[0].Rows)
# Set project, plan & suite variables....
[Int16]$ProjectID = $Row.Item('ProjectId')
[Int16]$PlanID = $Row.Item('PlanId')
[Int16]$ParentSuiteID = $Row.Item('ParentSuiteId')
[Int16]$SuiteID = $Row.Item('SuiteId')
$ProjectName = $Row.Item('ProjectName')
$PlanName = $Row.Item('PlanName')
$Path = $Row.Item('Path')
$RecurseLevel = $Row.Item('RecurseLevel')
# Set local build path variable....
switch -wildcard ($Path)
"*WebCMS*\Administration\*"
$CUITBuildPath = $CUITPathUNC + '\WebCMS\Administration'
"*WebCMS*\Instructor\*"
$CUITBuildPath = $CUITPathUNC + '\WebCMS\Instructor'
"*WebCMS*\Student\*"
$CUITBuildPath = $CUITPathUNC + '\WebCMS\Student'
"*WebProduct*\Instructor\*"
$CUITBuildPath = $CUITPathUNC + '\WebProduct\Instructor'
"*WebProduct*\Student\*"
$CUITBuildPath = $CUITPathUNC + '\WebProduct\Student'
default
$CUITBuildPath = $CUITPathUNC
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
Write-Output 'Test Suite:' | Out-File -FilePath $LogFile -Append
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
Write-Output " ID:" | Out-File -FilePath $LogFile -Append
Write-Output " Project: $ProjectID" | Out-File -FilePath $LogFile -Append
Write-Output " Plan: $PlanID" | Out-File -FilePath $LogFile -Append
Write-Output " Parent Suite: $ParentSuiteID" | Out-File -FilePath $LogFile -Append
Write-Output " Suite: $SuiteID" | Out-File -FilePath $LogFile -Append
Write-Output " Config: $ConfigurationID" | Out-File -FilePath $LogFile -Append
Write-Output " Name:" | Out-File -FilePath $LogFile -Append
Write-Output " Project: $ProjectName" | Out-File -FilePath $LogFile -Append
Write-Output " Plan: $PlanName" | Out-File -FilePath $LogFile -Append
Write-Output " Config: $ConfigurationName" | Out-File -FilePath $LogFile -Append
Write-Output " Path:" | Out-File -FilePath $LogFile -Append
Write-Output " Suite: $Path" | Out-File -FilePath $LogFile -Append
Write-Output " Build: $CUITBuildPath" | Out-File -FilePath $LogFile -Append
# --DEBUG ONLY--> Write-Output " Recursion: $RecurseLevel" | Out-File -FilePath $LogFile -Append
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
# Set TCM arguements....
$ArguementPlanID = "/planid:$PlanID"
$ArguementTitle = "/title:$Title - $Path (SuiteID: $SuiteID)"
$ArguementSuiteID = "/suiteid:$SuiteID"
$ArguementConfigurationID = "/configid:$ConfigurationID"
$ArguementTFSCollection = "/collection:$TFSCollection"
$ArguementTeamProject = "/teamproject:$TFSTeamProject"
if(![string]::IsNullOrEmpty($CUITBuildPath))
$ArguementBuildDirectory = "/builddir:$CUITBuildPath"
$ArguementBuild = ""
$ArguementBuildDefinition = ""
else
$ArguementBuildDirectory = ""
$ArguementBuild = "/build:$TFSBuild"
$ArguementBuildDefinition = "/builddefinition:$BuildDefinition"
$ArguementTestEnvironment = "/testenvironment:$WebServer"
$ArguementSettingsName = ""
if(![string]::IsNullOrEmpty($SettingsName))
$ArguementSettingsName = "/settingsname:$SettingsName"
# Create test run....
Write-Host "$TCMEXE 'run' '/create' $ArguementTitle $ArguementPlanID $ArguementSuiteID $ArguementConfigurationID $ArguementTFSCollection $ArguementTeamProject $ArguementBuild $ArguementBuildDefinition $ArguementBuildDirectory $ArguementTestEnvironment $ArguementSettingsName"
Write-Output " $TCMEXE 'run' '/create' $ArguementTitle $ArguementPlanID $ArguementSuiteID $ArguementConfigurationID $ArguementTFSCollection $ArguementTeamProject $ArguementBuild $ArguementBuildDefinition $ArguementBuildDirectory $ArguementTestEnvironment $ArguementSettingsName" | Out-File -FilePath $LogFile -Append
try
$TestRunID = & $TCMEXE 'run' '/create' $ArguementTitle $ArguementPlanID $ArguementSuiteID $ArguementConfigurationID $ArguementTeamProject $ArguementTFSCollection $ArguementBuild $ArguementBuildDefinition $ArguementBuildDirectory $ArguementTestEnvironment $ArguementSettingsName
catch
$ExitMessage = $_Exception.Message
# --DEBUG ONLY--> Write-Output "TestRunID: $TestRunID" | Out-File -FilePath $LogFile -Append
if ($TestRunID -match '.+\:\s(?<TestRunID>\d+)\.')
# The test run ID is identified as a property in the match collection so we can access it directly by using the group name from the regular expression (i.e. TestRunID).
$TestRunID = $matches.TestRunID
$ArguementID = "/id:$TestRunID"
$TestRunResultsFile = $TempDirectory + "\TestRunResults$TestRunID.trx"
$ArguementQueryText = "/querytext:SELECT * FROM TestRun WHERE TestRunID=$TestRunID"
$ArguementResultsFile = "/resultsfile:""$TestRunResultsFile"""
Write-Host " Waiting for test run to complete ..."
Write-Host $TCMEXE 'run' '/list' $ArguementTeamProject $ArguementTFSCollection $ArguementQueryText
Write-Output " $TCMEXE 'run' '/list' $ArguementTeamProject $ArguementTFSCollection $ArguementQueryText" | Out-File -FilePath $LogFile -Append
$WaitingForTestRunCompletion = $true
$WaitCount= 0
while ($WaitingForTestRunCompletion)
$WaitCount = $WaitCount + 1
Write-Output " Waiting ($WaitCount)...." | Out-File -FilePath $LogFile -Append
Start-Sleep -s $TestRunWaitDelay
$TestRunStatus = & $TCMEXE 'run' '/list' $ArguementTeamProject $ArguementTFSCollection $ArguementQueryText
$TestRunStatus
if ($TestRunStatus.Count -lt 3 -or ($TestRunStatus.Count -gt 2 -and $TestRunStatus.GetValue(2) -match '.+(?<DateCompleted>\d+[/]\d+[/]\d+)'))
$WaitingForTestRunCompletion = $false
Write-Host "Evaluating test run $TestRunID results..."
# Take small pause(s) since the results might not be published yet....
Start-Sleep -s $TestRunWaitDelay
# Export results....
Write-Host $TCMEXE 'run' '/export' $ArguementID $ArguementTeamProject $ArguementTFSCollection $ArguementResultsFile
Write-Output " $TCMEXE 'run' '/export' $ArguementID $ArguementTeamProject $ArguementTFSCollection $ArguementResultsFile" | Out-File -FilePath $LogFile -Append
$WaitingForTestRunExport = $true
$WaitCount= 0
while ($WaitingForTestRunExport -and $WaitCount -lt 5)
$WaitCount = $WaitCount + 1
Write-Output " Waiting ($WaitCount)...." | Out-File -FilePath $LogFile -Append
$ExportResult = & $TCMEXE 'run' '/export' $ArguementID $ArguementResultsFile $ArguementTFSCollection $ArguementTeamProject
if ([System.IO.File]::Exists($TestRunResultsFile))
$WaitingForTestRunExport = $false
if ([System.IO.File]::Exists($TestRunResultsFile))
# Load the XML document contents.
[xml]$TestResultsXML = Get-Content "$TestRunResultsFile"
# Extract the results of the test run.
$TotalTests = $TestResultsXML.TestRun.ResultSummary.Counters.total
$PassedTests = $TestResultsXML.TestRun.ResultSummary.Counters.passed
$FailedTests = $TestResultsXML.TestRun.ResultSummary.Counters.failed
$InconclusiveTests = $TestResultsXML.TestRun.ResultSummary.Counters.inconclusive
# Output the results of the test run.
Write-Host "========== Test: $TotalTests tests ran, $PassedTests succeeded, $FailedTests failed, $InconclusiveTests inconclusive =========="
Write-Output "--------------------------------------------------------------------------------" | Out-File -FilePath $LogFile -Append
Write-Output "Summary:" | Out-File -FilePath $LogFile -Append
Write-Output "--------------------------------------------------------------------------------" | Out-File -FilePath $LogFile -Append
Write-Output " Total: $TotalTests" | Out-File -FilePath $LogFile -Append
Write-Output " Passed: $PassedTests" | Out-File -FilePath $LogFile -Append
Write-Output " Failed: $FailedTests" | Out-File -FilePath $LogFile -Append
Write-Output " Inconclusive: $InconclusiveTests" | Out-File -FilePath $LogFile -Append
$SumFailed += $FailedTests
$SumInconclusive += $InconclusiveTests
# Remove the test run results file.
[System.IO.File]::Delete($TestRunResultsFile) | Out-Null
# Add "current" TestRunID to the list of TestRunID(s)....
if ($ListTestRunID -ne $null)
$ListTestRunID = $ListTestRunID + ', '
$ListTestRunID = $ListTestRunID + $TestRunID
# Next test suite....
4. Extract record set of test runs from TFS via SQL query:
# FUNCTION: Retrieve-TestRuns
# Parameters:
# (1.) LogFile -- Name of log file (e.g., C:\Temp or C:\Temp\DEPLOY_DatabaseServer_WebCMS2_DF06_20131031.6.log)
# (2.) Connection -- Database connection
# (3.) ListTestRunID -- List of test run identifiers
Function Retrieve-TestRuns
param
[Parameter(Mandatory=$True)][String]$LogFile,
[Parameter(Mandatory=$True)]$Connection,
[Parameter(Mandatory=$True)][String]$ListTestRunID
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
Write-Output "Retrieve test run(s): " | Out-File -FilePath $LogFile -Append
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
$TestRuns = '(' + $ListTestRunID + ')'
$Command = New-Object System.Data.SqlClient.SqlCommand
$SQLStatement = "
WITH
cte_State
AS
SELECT 0 AS [StateID], 'Unspecified' AS [StateName]
UNION ALL
SELECT 1 AS [OutcomeId], 'To Be Determined (1)' AS [StateName]
UNION ALL
SELECT 2 AS [StateID], 'In Progress' AS [StateName]
UNION ALL
SELECT 3 AS [StateID], 'Completed' AS [StateName]
UNION ALL
SELECT 4 AS [StateID], 'Aborted' AS [StateName]
UNION ALL
SELECT 5 AS [OutcomeId], 'To Be Determined (5)' AS [StateName]
UNION ALL
SELECT 6 AS [StateID], 'Needs Investigation' AS [StateName]
SELECT
TR.[ProjectId] AS [Project Id],
P.[ProjectName],
TR.[TestPlanId] AS [Plan Id],
TP.Name AS [TestPlanName],
TR.[TestRunId] AS [Run Id],
TR.[Title],
S.[StateID] AS [State Id],
S.[StateName] AS [State],
TR.[StartDate] AS [Date Started],
TR.[CompleteDate] AS [Date Completed],
DATEDIFF(SECOND, TR.[StartDate], TR.[CompleteDate]) AS Duration,
TR.[Type],
TR.[IsAutomated],
TR.[TotalTests] AS [Total],
TR.[PassedTests] AS [Passed],
TR.[IncompleteTests] AS [Incomplete],
TR.[UnanalyzedTests] AS [Unanalyzed],
TR.[NotApplicableTests] AS [Not Applicable]
FROM
[Tfs_DefaultCollection].[dbo].[tbl_TestRun] AS TR
INNER JOIN [Tfs_DefaultCollection].[dbo].[tbl_Project] AS P ON TR.ProjectId = P.ProjectId
INNER JOIN [Tfs_DefaultCollection].[dbo].[tbl_Plan] AS TP ON TR.TestPlanId = TP.PlanId
INNER JOIN cte_State AS S ON TR.[State] = S.[StateID]
WHERE
TR.TestRunId IN $($TestRuns)
ORDER BY
TR.[StartDate]
$Command.CommandText = $SQLStatement
$Command.Connection = $Connection
$Command.CommandTimeout = 30
$DataAdapter = New-Object System.Data.SqlClient.SqlDataAdapter
$DataAdapter.SelectCommand = $Command
$DataSet = New-Object System.Data.DataSet
$DataAdapter.Fill($DataSet) | Out-Null
Write-Output "$SQLStatement" | Out-File -FilePath $LogFile -Append
# --DEBUG ONLY--> $DataSet.Tables[0]
return $DataSet
5. Extract record set of test results from TFS via SQL query:
# FUNCTION: Retrieve-TestRunResults
# Parameters:
# (1.) LogFile -- Name of log file (e.g., C:\Temp or C:\Temp\DEPLOY_DatabaseServer_WebCMS2_DF06_20131031.6.log)
# (2.) Connection -- Database connection
# (3.) ListTestRunID -- List of test run identifiers
Function Retrieve-TestRunResults
param
[Parameter(Mandatory=$True)][String]$LogFile,
[Parameter(Mandatory=$True)]$Connection,
[Parameter(Mandatory=$True)][String]$ListTestRunID
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
Write-Output "Retrieve test result(s): " | Out-File -FilePath $LogFile -Append
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
$TestRuns = '(' + $ListTestRunID + ')'
$Command = New-Object System.Data.SqlClient.SqlCommand
$SQLStatement = "
WITH
cte_Outcome
AS
SELECT 0 AS [OutcomeId], 'To Be Determined (0)' AS [OutcomeName]
UNION ALL
SELECT 1 AS [OutcomeId], 'In Progress' AS [OutcomeName]
UNION ALL
SELECT 2 AS [OutcomeId], 'Passed' AS [OutcomeName]
UNION ALL
SELECT 3 AS [OutcomeId], 'Failed' AS [OutcomeName]
UNION ALL
SELECT 4 AS [OutcomeId], 'Inconclusive' AS [OutcomeName]
UNION ALL
SELECT 5 AS [OutcomeId], 'To Be Determined (5)' AS [OutcomeName]
UNION ALL
SELECT 6 AS [OutcomeId], 'Aborted' AS [OutcomeName]
UNION ALL
SELECT 7 AS [OutcomeId], 'Blocked' AS [OutcomeName]
UNION ALL
SELECT 8 AS [OutcomeId], 'Not Executed' AS [OutcomeName]
UNION ALL
SELECT 10 AS [OutcomeId], 'Error' AS [OutcomeName]
UNION ALL
SELECT 11 AS [OutcomeId], 'Not Applicable' AS [OutcomeName]
UNION ALL
SELECT 12 AS [OutcomeId], 'Paused' AS [OutcomeName]
UNION ALL
SELECT 13 AS [OutcomeId], 'To Be Determined (13)' AS [OutcomeName]
UNION ALL
SELECT 255 AS [OutcomeId], 'Never Run' AS [OutcomeName]
cte_State
AS
SELECT 0 AS [StateID], 'None' AS [StateName]
UNION ALL
SELECT 1 AS [StateID], 'Ready' AS [StateName]
UNION ALL
SELECT 2 AS [StateID], 'Completed' AS [StateName]
UNION ALL
SELECT 3 AS [StateID], 'Not Ready' AS [StateName]
UNION ALL
SELECT 4 AS [StateID], 'In Progress' AS [StateName]
UNION ALL
SELECT 5 AS [StateID], 'To Be Determined' AS [StateName]
SELECT DISTINCT
TR.[TestRunId] AS [Run Id],
TR.[TestCaseId] AS [Case Id],
O.[OutcomeID] AS [Outcome Id],
O.[OutcomeName] AS [Outcome],
S.[StateID] AS [State Id],
S.[StateName] AS [State],
TR.[TestCaseTitle] AS [Title],
TR.[AutomatedTestName] AS [Automation Method],
TR.[DateStarted] AS [Date Started],
TR.[DateCompleted] AS [Date Completed],
DATEDIFF(SECOND, TR.[DateStarted], TR.[DateCompleted]) AS Duration,
TR.[FailureType] AS [Failure Type],
TR.[ErrorMessage] AS [Error]
FROM
[Tfs_DefaultCollection].[dbo].[tbl_TestResult] AS TR
INNER JOIN cte_Outcome AS O ON TR.Outcome = O.OutcomeID
INNER JOIN cte_State AS S ON TR.State = S.StateID
WHERE
TR.TestRunId IN $($TestRuns)
ORDER BY
TR.[TestRunId],
O.[OutcomeName],
TR.[TestCaseTitle]
$Command.CommandText = $SQLStatement
$Command.Connection = $Connection
$Command.CommandTimeout = 30
$DataAdapter = New-Object System.Data.SqlClient.SqlDataAdapter
$DataAdapter.SelectCommand = $Command
$DataSet = New-Object System.Data.DataSet
$DataAdapter.Fill($DataSet) | Out-Null
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
Write-Output "SQL Statement: " | Out-File -FilePath $LogFile -Append
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
Write-Output "$SQLStatement" | Out-File -FilePath $LogFile -Append
# --DEBUG ONLY--> $DataSet.Tables[0]
return $DataSet
6. Email results to distribution list
Currently, I'm simplifying the extraction of suite path ... replacing hardcoded depth with STUFF() & XML PATH
Carl.

How to find all purchase documents for project with tcode CNMM

Hi all,
I have some PRs generated for project by MRP running, and i can't these PRs with tcode CNMM .
How to set the system to show them ?
Thanks .

Hi Wayne Weng,
CNMM transaction is for PROMAN.
To get the PRs against a project please try ME5J transaction. This will provide you with all the Purchase Requisitions against a project.
To get the POs against a project you may try ME2J.
Hope this will help you.
Venu

On import, graphics resized after displaying object properties

Hello, my XML files contain many links to EPS files, such as:
<image href="mygraphic.eps" align="right" id="0B">
After importing the XML files, the graphics are sized correctly. They're exactly the size of the imported-by-reference graphic.
Some of the graphics resize if I display the object properties or simply save the file. For example, an EPS will resize itself 20%.
In one file that contains two images, only one might resize itself.
My read/write rules have no rules to resize a graphic on import.
What could I be missing?

Thanks for the suggestion, I'll give it a try. But I'm not sure I can even read any temperatures from this old gpu. I ran sensors-detect and it found none.
Also, if it was a heat issue, why does it go away as soon as I restart the X server? Surely it would still be overheating. Maybe it's time to take this thing apart again and clean it out.
Last edited by xamindar (2015-01-17 16:29:38)

Is there a way to find all highlights made in the macbook ibooks library in the case that you cant remember the book in which the highlight was made?

Is there a way to find all highlights made in the MacBook iBooks library in the case that you cant remember the book in which the highlight was made?

Some things that might help:
1. Only the most recently used apps actually occupy memory (used to be the most recent 4, but may have changed in the latest iPhones). After 4 (or so), IOS writes them out of active memory, as it does for even the latest 4 if there's no activity for a long time. So the business of closing all the open apps, apart from the most recent ones doesn't make a difference. Tis article has a good explanation:
http://www.speirs.org/blog/2012/1/2/misconceptions-about-ios-multitasking.html
2. There are settings about background app activity that might help:
- Settings, General, Background App Refresh controls which apps can update their data in the background
- Settings, Notifications controls which apps can tell you things, which they have to wake up to do.
- Settings, Privacy, Location Services controls which apps monitor your location - another activity that uses resources
Hope some of that helps

I would like to see a way to share books like all my co-workers do with Kindle. Additionally, as a college student I would like to find a way to share my notes with other colleagues or book club members.

I would like to see a way to share books like all my co-workers do with Kindle. Additionally, as a college student I would like to find a way to share my notes with other colleagues or book club members.

I would like to see a way to share books like all my co-workers do with Kindle. Additionally, as a college student I would like to find a way to share my notes with other colleagues or book club members.

I am working with ADOBE "Classroom in a Book," with a supplied DVD. I have downloaded all the lessons, and in Lesson 5 I am able to find only (05A) but not 05B, 05C, 05D, and 05E. My disc seems not to have those...only 05A. I need your help?.

QUESTION: I am working with ADOBE 'Classroom in a Book" with the supplied DVD. I have copied all t he Lessons to my hard drive, and have completed Lessons 1-4. However, in LESSON 5, my disc shows me ONLY one of t he 5 examples shown in the book. I see ONLY "05a," BUT not the following which are in the book: 05B, 05C, 05D, and 05E. I need help to work with lesson #5.

See who published the book and contact that web site. There should be a place to download files pertaining to the book.

Changing format of all graphics files is very cumbersome - how to make it less so?

Hello,
This problem is happening in FM 8, running on Windows XP.
I have recently converted all the image files referenced in a book, from one format to another. When I open a chapter (.fm) file in that book, FM looks for the graphic file that has been referenced in the first frame it finds (I import all graphics by reference). It opens a navigation dialog so I can locate the missing file, at which time I select the new file instead. Unfortunately, I have to do this over and over, for each graphic referenced by the FM file. Isn't there a way for me to tell FM to look for the same base filename, but with a new extension? A default file type for imported files? Is there a way to modify the .fm file itself to change the reference to the imported graphics? Having to tell FM the new filename for every graphic in the book is cumbersome and time-consuming (and I will be doing the same thing for about 75 manuals!). If FM can remember the location of an imported file and look for subsequent files in the new location, can't it do something similar for file types?
Compounding this problem is the fact that when the navigation dialog opens, the files in the current folder are automatically listed in "List" form, and are not in alphabetical order. If there are many graphics in that folder, it takes extra time to hunt for the desired file, so I usually change the listing format to "Detail" and then sort on "Name". But even that takes time. Are there defaults I could set so that the folder's contents are listed in the navigation dialog in the format I choose? I'm not even sure whether this is a FrameMaker or a Windows issue, so I don't know where to look for option settings. (I have poked around in FM options dialogs, and also the help files, but haven't found any references to this.)
Help with even one of these would save me a lot of time.
Thank you!
Joyce Wermont

Error7103 -
Thank you for a quick response. I just tried this, and it seemed to work - I was able to edit the .mif file and change all the format extensions. Then I opened the .mif in FM and it looked OK, it loaded the correct graphic files automatically, and there didn't appear to be any scaling problems. But when I tried to save it as an FM doc file, it wouldn't allow that. Error message: "Filenames ending in .mif cannot be saved in Document format". I used Save As, btw. But it didn't work with plain Save either.
It sounds like you've been successful in saving .mif to .fm - any tips? Again, I'm using FM 8.
Thanks,
Joyce

Can I Rename Tags Across all Files in a Book?

Hi all,
I have a question about FrameMaker 8 to which I cannot find an answer.
Can I rename a Paragraph Tag across all files in a book? For example, I have a Paragraph Tag in each of my chapters named "SysResponse" that I want to rename to "System Response". I know that I can do this by going into each file and renaming the tag manually. However, I'm curious to know if I can do this once and apply it across all files so that the "SysResponse" tag renames to "System Response" automatically wherever it occurs.
If this is possible, it would save so much time; I need to rename several tags (Paragraph, Character, and Table) in preparation for a template transition/clean up. I'd even be willing to do it in an alternate way, such as doing a find and replace in a .MIF file, if this is what I need to do.
Thanks in advance for any advice!
Chris

Chris:
After backing up your files lest there be a disaster:
1. At the file level, rename one instance then use Edit > Copy Special > Paragraph Format to put the new paragraph style on the clipboard.
2. At the book level, in Edit > Find/Change choose Paragraph Tag in the list of Find choices then type the name of the new paragraph style.
3. In the Change list, choose By Pasting.
Note, too, that Silicon Prairies Paragraph Tools provides a cost-effective way to perform value-added operations on a book's Paragraph tags...
Cheers & hope this helps,
Riley

Regarding Pages charts, when I try to 'build' a 3D chart all I get is little dots but not graphics. No problems with 2D charts though. Guess my question is "Help?"

Regarding Pages charts, when I try to 'build' a 3D chart all I get is little dots but not graphics. No problems with 2D charts though. Guess my question is "Help?"

Sorry for the delay getting back to this.
Thanks to Fruhulda and Peter for their comments regarding the refusal of Pages to let me make 3D charts.
In answer to the questions put to me in this regard :
1. Pages version : Pages '09 v.4.1 (923)
2. Mac O/S :          v.10.6.8
3. 3D chart :          Can't find a 'name', but upright bars with rounded corners ???
4. Moved apps :    Not that I'm aware of! All should be as installed off the disc.
5. A note :              I have been able to create these in the past - related to a SW update?
                      and ... can create these charts perfectly in Keynote (go figure).
Thanks to all.
CM

Find all music files and move to one folder for all of family to access, find all music files and move to one folder for all of family to access

I seem to have music files in various places on my laptop, on my husbands computer and our main imac. What we want to do is put all music on imac so when each of us logs on we have the same files availabe in itunes, but we logon seperately so we can have different playlists and checked music. So here is what I want to do:
Find all music files on each computer seperately and put everything in one folder one each computer, so three folders total to start...
Move my husbands itunes library and my itunes library from each of our laptops to our main imac, making one huge itunes folder
I want to store our music on an external hard drive, which I have, so I have a full library for backup purposes.
I want all future music downloaded on any of our laptops to transfer to the main imac computer, again to keep one main library
I want all video, apps, books, etc on each laptop to be available in one file on my main imac also so we can all use them
So mainly I want to organize, organize, organize and put everything in one spot so things don't get all messed up and some items are only accessible to me some times and not my husband or vice versa. We want to share everything we can so we don't have to pay twice. I have read many instuctions, but nothing seems to be helping me and was hoping someone could...
Thanks, l

I am totally running into the same issue as well. On top of that, when syncing to my iPhone, it took some of the tracks from my iphone and recopied them to the iTunes library, as new files, so now I have a ton of duplicates, and tons of tracks that can't find the iTunes folder, so they have the little "!" next to them.
It would be really nice to have someone answer this question. I didn't think, moving my iTunes library to a bigger external hard drive would have caused all this madness

Is there a way to link two FrameMaker 12 books with shared content into the same RoboHelp 11 file?

This one might require some back story.
I'm working at a company with roughly 60 business units that will each be getting their own emergency response procedures (.FM files compiled into a single FrameMaker .book file for their department). I then want to link all of these books to a single RoboHelp so that when it comes time to publish all of these plans into WebHelp menus I can do that with a single batch generate/publish.
My problem is that some of the FM files within the books are shared (maybe two or more departments are at the same location or all of them share the same corporate level plans) so that when I try to link two books with a shared FM file it throws an error.
Is there away to allow multiple copies of a FM file to exist in a single RoboHelp? Or is there a better solution to the task at hand?
Any suggestions you might have would be greatly appreciated as I am still a moderate beginner with Frame and RoboHelp.
---Corey---
P.S. Just to complicate things this will all be done via SharePoint so books and FM files live there, and then the RoboHelp output will be published there.

I think you’re looking at creating a merged RH project – one parent project that subsumes all the linked FM to RH child projects – read up on merged help on Peter’s site (grainge.org)

FrameMaker 10 - Finding all graphics in a book with a Object Properties Scaling equal to 0%?

Similar Messages

Maybe you are looking for