Free download generator report for java
Maybe here is the forum to ask about this:
http://forum.java.sun.com/thread.jspa?threadID=5132502&messageID=9478120#9478120
Maybe here is the forum to ask about this:
http://forum.java.sun.com/thread.jspa?threadID=5132502&messageID=9478120#9478120
Similar Messages
-
Configuration of EWA reports for java systems.
Hello,
I am facing a problem with configuration of EWA reports for SAP NW Portal.
I have already configured EWA for abap systems, and those are running good on weekly basis. but i have problem with configuration of reports for java systems.
So far, i have installed an SMD agent and CA on my EP-satellite system. I have also configured and SMD server on my Sollution Manager and registered the SMD agent on SMD server and installed Willy Introscope on SMD server.
I am using a central SLD which is running on different host as Solution Manager. I did all the configuration (smsy_setup, configuration of sld_data_supplier etc... )
I have also created the system in SMSY, matched the smsy with SLD and assigned Logical component to java system.
So far, so good according to manuals but when i want do define data collection in the SMD for Gargage Collection (task in scheduler) i cannot see host of my portal system.
I can see only the hosts (scheduler tasks ) of all abap system for which the EWA reports have already been generated.
Am i missing something?
Some configuration in SMD?
My solution manager is running on Sap NW 7.0, SPS16,
Sattelite system NW 7.0 EP, SPS 6 (planning to SPS 19)
Thank you for your advices!!!Hi Suveer,
I did the configuration before. I forgot to mention it.
I found this errors in Diagnostic Setup, maybe this could be the cause of the issue.
Step BI Details
Cannot invoke CCMSBISETUP on host localhost
!! Exception : An exception occured during the execution of this function 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC'.(cause=com.sap.sup.admin.abap.rfc.exception.RfcExecutionException The function named 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC' doesn't exist!)
Exceptions
com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: An exception occured during the execution of this function 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC'.
at com.sap.sup.admin.abap.rfc.function.RfcFunction.execute(RfcFunction.java:92)
at com.sap.sup.admin.setup.AbapSysRfcAdapter.setupBIConfiguration_ccmsBiSetup(AbapSysRfcAdapter.java:743)
at com.sap.sup.admin.setup.AbapSysRfcAdapter.setupBIConfiguration_ccmsBiSetup(AbapSysRfcAdapter.java:727)
at com.sap.sup.admin.setup.ManagingServices.startCcmsBiSetup(ManagingServices.java:2686)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:334)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:304)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.setupSMDServer(ConfirmationView.java:378)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.onActionSetupServer(ConfirmationView.java:211)
at com.sap.sup.admin.setup.wizard.monitoring.wdp.InternalConfirmationView.wdInvokeEventHandler(InternalConfirmationView.java:278)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: The function named 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC' doesn't exist!
at com.sap.sup.admin.abap.rfc.function.RfcFunction.execute(RfcFunction.java:62)
... 37 more
And also this one>>
Step RFC Details
Failed to create TCP/IP RFC on ABAP side (SM59)
!! Exception : Source system cannot be set to Unicode , error key: RFC_ERROR_SYSTEM_FAILURE
Exceptions
com.sap.aii.proxy.framework.core.BaseProxyException: Source system cannot be set to Unicode , error key: RFC_ERROR_SYSTEM_FAILURE
at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
at com.sap.sup.admin.setup.abapproxy.tcpiprfc.TcpIpRfcProxy_PortType.inst_Create_Tcpip_Rfcdest(TcpIpRfcProxy_PortType.java:16)
at com.sap.sup.admin.setup.ManagingServices.createTcpIpRFC(ManagingServices.java:663)
at com.sap.sup.admin.setup.ManagingServices.createTcpIpRFC(ManagingServices.java:637)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:300)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:304)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.setupSMDServer(ConfirmationView.java:378)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.onActionSetupServer(ConfirmationView.java:211)
at com.sap.sup.admin.setup.wizard.monitoring.wdp.InternalConfirmationView.wdInvokeEventHandler(InternalConfirmationView.java:278)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
And in the troubleshooting setup for managed systems, i can see that no initial upload was found form the SMD agent which is running on Java System.
Thanks a lot for your remarks -
How to create reports for java programs?
Hi,
I have planned to do a project using java,that will help to create reports for java programs. To create reports for java programs i used two options.
1)Crystal reports
2)Write the code to produce reports for each java programs
The second one little cumbersome.SO i planned to develop a software that is compatible for creating java reports.
I would like to know how i will do the project?Can you help me to made it a successful project.Hope you can help me.
Expecting your reply
PreethiRenjithUggg... Crystal reports...
I would personally write a generic report generator, It would probably be easier than fighting w/
crystal reports (CR is popular, but painful :) )
Anyhow, I've written report generators for many different applications. It is one of the simplest projects you
can take on, and the results make you feel special --
If your need nicely formated, portable, printable reports, you could have your report generator make PDF files (the format is open, and VERY simple, plus people like pdf files) you can get the pdf spec from adobe or from wotsit.org (the famous wotsit file format archive).
enjoy! -
How to create a report with data using the Crystal Reports for Java SDK
Hi,
How do I create a report with data that can be displayed via the Crystal Report for Java SDK and the Viewers API?
I am writing my own report designer, and would like to use the Crystal Runtime Engine to display my report in DHTML, PDF, and Excel formats. I can create my own report through the following code snippet:
ReportClientDocument boReportClientDocument = new ReportClientDocument();
boReportClientDocument.newDocument();
However, I cannot find a way to add data elements to the report without specifying an RPT file. Is this possible? I seems like it is since the Eclipse Plug In allows you to specify your database parameters when creating an RPT file.
is there a way to do this through these packages?
com.crystaldecisions.sdk.occa.report.data
com.crystaldecisions.sdk.occa.report.definition
Am I forced to create a RPT file for the different table and column structures I have?
Thank you in advance for any insights.
Ted JenneyHi Rameez,
After working through the example code some more, and doing some more research, I remain unable to populate a report with my own data and view the report in a browser. I realize this is a long post, but there are multiple errors I am receiving, and these are the seemingly essential ones that I am hitting.
Modeling the Sample code from Create_Report_From_Scratch.zip to add a database table, using the following code:
<%@ page import="com.crystaldecisions.sdk.occa.report.application.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.data.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.document.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.definition.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.lib.*" %>
<%@ page import = "com.crystaldecisions.report.web.viewer.*"%>
<%
try {
ReportClientDocument rcd = new ReportClientDocument();
rcd.newDocument();
// Setup the DB connection
String database_dll = "Sqlsrv32.dll";
String db = "qa_start_2012";
String dsn = "SQL Server";
String userName = "sa";
String pwd = "sa";
// Create the DB connection
ConnectionInfo oConnectionInfo = new ConnectionInfo();
PropertyBag oPropertyBag1 = oConnectionInfo.getAttributes();
// Set new table logon properties
PropertyBag oPropertyBag2 = new PropertyBag();
oPropertyBag2.put("DSN", dsn);
oPropertyBag2.put("Data Source", db);
// Set the connection info objects members
// 1. Pass the Logon Properties to the main PropertyBag
// 2. Set the Server Description to the new **System DSN**
oPropertyBag1.put(PropertyBagHelper.CONNINFO_CRQE_LOGONPROPERTIES, oPropertyBag2);
oPropertyBag1.put(PropertyBagHelper.CONNINFO_CRQE_SERVERDESCRIPTION, dsn);
oPropertyBag1.put("Database DLL", database_dll);
oConnectionInfo.setAttributes(oPropertyBag1);
oConnectionInfo.setUserName(userName);
oConnectionInfo.setPassword(pwd);
// The Kind of connectionInfos is CRQE (Crystal Reports Query Engine).
oConnectionInfo.setKind(ConnectionInfoKind.CRQE);
// Add a Database table
String tableName = "Building";
Table oTable = new Table();
oTable.setName(tableName);
oTable.setConnectionInfo(oConnectionInfo);
rcd.getDatabaseController().addTable(oTable, null);
catch(ReportSDKException RsdkEx) {
out.println(RsdkEx);
catch (Exception ex) {
out.println(ex);
%>
Throws the exception
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: java.lang.NullPointerException---- Error code:-2147467259 Error code name:failed
There was other sample code on SDN which suggested the following - adding the table after calling table.setDataFields() as in:
String tableName = "Building";
String fieldname = "Building_Name";
Table oTable = new Table();
oTable.setName(tableName);
oTable.setAlias(tableName);
oTable.setQualifiedName(tableName);
oTable.setDescription(tableName) ;
Fields fields = new Fields();
DBField field = new DBField();
field.setDescription(fieldname);
field.setHeadingText(fieldname);
field.setName(fieldname);
field.setType(FieldValueType.stringField);
field.setLength(40);
fields.add(field);
oTable.setDataFields(fields);
oTable.setConnectionInfo(oConnectionInfo);
rcd.getDatabaseController().addTable(oTable, null);
This code succeeds, but it is not clear how to add that database field to a section. If I attempt to call the following:
FieldObject oFieldObject = new FieldObject();
oFieldObject.setDataSourceName(field.getFormulaForm());
oFieldObject.setFieldValueType(field.getType());
// Now add it to the section
oFieldObject.setLeft(3120);
oFieldObject.setTop(120);
oFieldObject.setWidth(1911);
oFieldObject.setHeight(226);
rcd.getReportDefController().getReportObjectController().add(oFieldObject, rcd.getReportDefController().getReportDefinition().getDetailArea().getSections().getSection(0), -1);
Then I get an error (which is not unexpected)
com.crystaldecisions.sdk.occa.report.lib.ReportDefControllerException: The field was not found.---- Error code:-2147213283 Error code name:invalidFieldObject
How do I add one of the table.SetDataFields() to my report to be displayed?
Are there any other pointers or suggestions you may have?
Thank you -
Unable to generate report for size of KM folder
hi all,
i want to generate report for size of folder in KM.I am havingthe following roles content admin,content management,system admin,home, are these roles sufficent to generate report or any roles are needed?
And other issue is after going into Content management role I am clicking reports workset but I am unable to see "Folder Size Calculation" option, any full access are needed to see it.
I am following help.sap link plz don't send it ,give me any other Material.
After starting the Km report in Resource Statistics its showing size as zero.
help me in sloving this issue.
thanks in advance,
AravindYou could find all KM reports to the given navigation
try all these paths...I am unable to findout your issue definitely permission related
System Administration -> System Configuration -> Knowledge Management -> Content Management -> Related Topics -> CM Repository Reports
Content Administration -> KM Content -> Toolbox -> Reports
Content Management -> Reports
Regards
Koti -
Problem generating stubs for Java EJB web service deployed in OAS
I created an EJB web service and I've successfully deployed it in my Oracle App Server. Some of the methods work fine but others produce the ff error:
org.apache.soap.SOAPException - java.lang.IllegalArgumentException: No Serializer found to serialize [classname] using encoding style [encoding]It seems that the objects specified as parameters in the web service methods exposed are the only ones that had stubs generated for them. Other objects I use, which are usually wrapped inside a Vector, did not have generated stubs.
Example:
public String loginUser(UserDTO userDTO) throws RemoteException, NamingException, SQLException;
public String addItems (Vector vecItems) throws RemoteException, NamingException, SQLException; // where vecItems is a collection of ItemDTO objects In this scenario, stubs were generated for the UserDTO class, but not for the ItemDTO class. In effect, calling the addItems method resulted to the exception I mentioned above.
I did a workaround wherein I declared a dummy method which accepted all the types of objects I needed as parameters so all the necessary stubs can be generated, but this fix doesn't feel like it's the proper solution to my problem.
If anyone can help me, it would be greatly appreciated. Thanks!Crossposted:
Problem generating stubs for Java EJB web service deployed in OAS -
EWA alert report for java system shows wrong data
Hi,
In our solman system, EWA alert reports are configured every week for all the production systems (both ABAP and JAVA). Recently oracle database was upgraded from 10g to 11g in all the production systems. The EWA alert report for ABAP systems is correctly taking the 11g database details and is suggesting parameter changes. Unforunately the EWA alert report for Java systems is still pointing to 10g database and is suggesting the parameter changes for 10g only but the systems are on 11g.
In SMSY, the database of the java systems is maintained as 11g only and not 10g. STill we are not sure where the data is being fetched from.
Please help me in finding the issue.
Regards,
RagavHello,
iNote 1482818 would be iapplicable if not java checks are being made. You are not reporting no java checks, you are reportijng the check is being performed, but has the wrong value. When you updated the database dis you perform Solman_setup, Mnaaged system setup?
The reason I ask s that is what prepares the java side for EWA. For isntance if you had on old version of ST-SER such as 700_2008_2 then it does not know about Oracle 11.2....but that is on the ABAP side, you would need ST-SEr 701_2010_1 to
recognize ORacle 11.2 on the ABAP side.
So while I am not 100% sure in this specific instance, it seems logical that if the Java side isn't recognizing the Oracle Database version ( which means it is making this check) then you may need to run the Solman_setup, Mnaged system setup to pick up the ability to detect a new version of Oracel on the Java side.
It is certainly worth the try.
Regards,
Paul -
ORACLE 10g generate reports for audit trail
HELP ORACLE 10 g
I am a beginner about the oracle 10g
anybody can guide me how to start with
generate reports for audit trail , top ten url
, no of hits in the portlets ......
=(
thank you ....In a nutshell:
1 - You will have to have the portal database schema as your data source.
2 - You will have to design a target database schema with the target data bjects (tables, dimensions and fact tables - cubes) where the data will be loaded for reporting purposes.
3 - Then you will have to model the loading process by defining mappings (mappings will translate into generated code for the load process) and process flows to run the mappings in the right order etc.
4 - You will deploy the sources, targets and processing entities to the target schema.
5 - You will run the deployed code periodically as needed and maintain the source, target and loading entities which might change with time.
One observetion - OWB does not produce reports. It creates and maintains the data infrastructure for a reporting/analysis system (a data warehouse, data mart or an operational data store). To produce reports (for example, the top-10 report mentioned by you), you will have to run a reporting tool on top of the data structures created and maintained by OWB.
Regards:
Igor -
Hi,
I have a cRIO-9014 with a NI9505 DC brushed servo drive module, and I would like to program the FPGA for PWM and Quadrature encoder interfacing using the intellectual property IP functions mentioned in the "CompactRIO Motor Control Basics Tutorial":
Quadrature Encoder dX Method (FPGA, Use in SCTL).vi
Pulse Width Modulation (FPGA, Use in SCTL).vi
I made a search at ni.com/ipnet but I couldn't find them.
Where can I find free downloadable IP cores for PWM and encoder blocks to include them in my FPGA interface program?
Thanking you in advance,
Manuel
Solved!
Go to Solution.Found by myself (google search!) at:
https://lumen.ni.com/nicif/us/codepowelecguide/content.xhtml -
How to generate report for Service sheet - ECC 6.0
Hi
Can anyone let me know regarding how to generate reports for service sheets entered
regards
SanjayHi,
Get Service Entry Sheet with following T.codes:
1.MSRV6
2.ML84
Regards,
Biju K -
Impossible to download SAP Gui for Java (7.20)
Hello,
I have been trying for more than an hour to download SAP GUI for Java (7.20), but without luck.
I'm on Linux, and have tried chrome, Firefox and download manager. I'm on a plain internet connection without proxy.
On Firefox and chrome:
1) Went to the market place and chose "SAP GUI FOR JAVA 7.20 -> Linux on IA32 32bit"
On the download tab, I see a list of files, amongst which is "PlatinGUILNX_3-10006060.JAR"
Clicking it brings up a new window, but no download is started, i.e. nothing happens. The link in the new window is
https://smpdla.sap.com/00000331/703/PlatinGUILNX_3-10006060.JAR?object_id=012002523100010356772010D&filepath=00000331\703\PlatinGUILNX_3-10006060.JAR&uid=S0008007141&LOC=FRA
2) So I installed the download manager, prepared a basket from the list at (1) and refreshed. Trying to connect brought up the failure: u201CThe basket content could not be read. [...]
Exception: class dlClient.ResponseParseException
Message: Invalid line in basket content data: <HTML>
Current token:"
(i.e. nothing more after current token.)
Any ideas? TIA
(I must say I'm a little disappointed through how many hoops I have to go for a simple download. The registration was already a bit more complicated than is usual, but I could understand security and administrative reasons. But why is it not possible to provide a simple download link for logged in users which only works for logged in users?)Hello Joeren,
I am really sorry that we are no longer allowed to provide the anonymous ftp download.
Method 2) is the one which should work for you.
Please have a look at [notes|http://service.sap.com/notes] of component XX-SER-SAPSMP-SDM, in particular [note 401195|https://service.sap.com/sap/support/notes/401195] regarding Download Manager. Did you enter the address of the SAP Service Marketplace (http://service.sap.com) correctly?
In case you do not find the information to make it work, please create a [support message|https://service.sap.com/message] on the component already mentioned, and someone responsible for Download Manager should contact you.
Apologizes for not being able to provide more assistance in this matter.
Best regards
Rolf-Martin -
Setup and configuration for system monitoring and IT Reporting for Java sys
Hi all,
How to setup and configuration for system monitoring and IT Reporting for Java system ?
How to connect Java system to Solman system?
Regards,
NeniHI,
What is your OS? You can use SAPCCMSR.exe to monitoring IT Reporting Java system on Solman.
Go to solman rz21 create a csmreg user. and configuration fil for agent. copy configuration fil on usr/sap/ccms/..
Go to comman line cd ../user/sap/xxx/sys/exe/.../ wite SAPCCMSR.00 -R pf=< ...../sys/profile/instans profile> .
You can se agent on rz10 and use this connaction on rz20 to monitoring and IT Reporting Java system on Solman.
I hope this help -
Reports :: can I download usage reports for more t...
Good morning Skypeland,
My Skype Manger accounts has a number of members and I need to download usage reports each month for those members. We will add members on a monthly basis which means the member list will grow and downloading reports could become a lengthy process.
Is there any way to download the reports for all members at the same time?
Kind regardsDid you get an answer to this?
I have over 3000 users and want ot get a basic usage report totals for different months.
Would be good if the report had more details included! -
DOWNLOAD CRYSTAL REPORTS FOR ECLIPSE 1.0.8 not compatible with java 1.4
Hi,
I understand that this plugin requires java 1.5. However, due to my company's existing infrastructure, I have to use java 1.4 for my web applications.
May I know if there is a older version of the CRYSTAL REPORTS FOR ECLIPSE compatible with java 1.4 (manual installation) available for download ?
Thanks in advance.You can download Java Runtime version 11.8.8.x [here|http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/1_0/crystalreports-javasdk-11.8.8.zip]
It supported JDK 1.4 for a few different web application server deployment. Check platform.txt in it. However this is very old version of CR runtime and can cause other issues in crystal reports rendering etc. in which case the only solution would be to get the latest CRJ runtime. -
How to generate Report in Java like VB.
I am doing a project in java, using 3-tier technology. As an front-end requirement i need to generate various reports for my company. So plea, if any one knows, reply me in detail.
to generation report in Java some user guided me to use e-Actuate. I want to know from were to download the software/or some e-Actuate help site.
Maybe you are looking for
-
How do I see more than 10 hits on the search page; it used to be 100
Under settings I used to be able to choose 100 hits for a question. Now, I am limited to 10. What happened? Thanks, Mac McClure
-
Start up slow on os x yosemite
os x Yosemite very slow on start up
-
When I am running "Preview" of few images and minimized 1 of them, if I double tap the tracking pad, magix mouse etc..., the gesture should show me what is currently open, the upper part of the screen and what is minimized, in the lower part of the
-
Hi After succeful completion of payment run,when i print payment propsal list, it will display vendor details ,bank details ,invoices and amount.suppose if a vendor is having 100 invoices then propsal list will be too lengthy,so i want the system to
-
I'm using Nokia 6500. I'm trying to move some messages from Inbox to Sent Messages folder using Nokia PC Suite 6.8.6. However, after I've done so, all the sender number is gone. It just said "not available". Please help!