Free download of transparent gateway for SQL Server

Can anyone give me the URL where I can download the transparent gateway for SQL Server.. I searched OTN but couldn't find it. I just want to try it out..
Thanks.

The indicated URL also shows the zip for the 10gR2 gateways for Windows software: 10201_gateways_win32.zip
To use a gateway you also have to use an Oracle database as a so-called integrating kernel. In this Oracle database you define the database link to the gateway to be able to connect to SQL Server.
But TG4MSQL 10gR2 has been desupported, which means that bugfixing has been stopped. Also just to make clear, allthough the software can be freely downloaded the product itself requires a license when you decide to use it after testing it.
And I recommend to try the DG4MSQL 11gR1 software instead, it can also be found at Oracle Technet:
http://www.oracle.com/technology/software/products/database/oracle11g/111070_win32_2008soft.html
When using a 11gR1 database gateway the Oracle database you use with the gateway must be 10.2.0.4.0 or higher. Or have a closer look at Metalink document: 457808.1 - Database Patch 5965763 Required For Pre-11g Databases Using 11g Database Gateways
Look for: win32_11gR1_gateways.zip
Regards,
Ed

Similar Messages

Oracle 9i on LINUX Transparent Gateway for SQL Server

Does anybody know if there is a Transparent Gateway available for Oracle 9i on LINUX to connect to SQL Server? I have run the installer and cannot seem to find the install options for any Transparent Gateways. I am familiar with their location in the universal installer as I have installed the Oracle/SQL Server Transparent Gateway with Oracle in WinNT. Perhaps Transparent Gateways for Oracle/LINUX are not available?
Thanks in advance.

I have the same issue - we want to upgrade our 9.2 to 10g Linux, and need to maintain connectivity to some legacy sqlserver databases. I can't find any mention of tg4msql for linux. What gives? Anyone know the answer to this? thanks, michael

Cannot find where to download Gateway for SQL Server

I have searched OTN every which way to find the Oracle Transparent Gateway for SQL Server. I have checked my CD's and I have every one imaginable but not the one for SQL server. Why? Where is it hidden? I am trying to connect to a SQL Server 6.0 and an Oracle 8.1.6.3 Database at the same time.
[email protected]

Hello,
All of the downloads are [url http://www.oracle.com/technology/software/products/jdev/htdocs/soft11.html]here. According to the [url http://www.oracle.com/technology/products/jdev/collateral/papers/11/certification/index.html]certification page, JDev 11.1.1.3 is certified against Windows 2008 server, so I'd start by downloading the Windows version from there (even though they didn't update the description to say "for windows 2008")
John

Oracle 11G Linux ( Oracle Database Gateway for SQL Server 11.1.0.6.0. )

Hi,
I am tring Gateway for SQL Server ..
I want to Select Oracle Database Gateway for SQL Server 11.1.0.6.0 at the time of installation, but It is not coming in the Avaliable Components List..
Is there any prerequisite for SQL server ?
Any Help please ?

Are you following the "Step Through the Oracle Universal Installer" section under
http://download.oracle.com/docs/cd/B28359_01/gateways.111/b31043/sqlserver.htm#CCHEDECC
?

Problem with "Database Gateway for SQL Server"

Hello,
i am testing the different technologies for connecting an oracle database with a sql-server database.
The way using 10g-generic-connectivity with ODBC works fine, but the 11g-DG4MSQL makes problems.
Environment:
Server PEGASUS (32bit Windows Server 2003 R2 SP2) with Oracle Database 10g Release 10.2.0.4.0
Server OBELIXUS (32bit Windows 2000 Sp4) with MS-SQL-Server 2005
On PEGASUS i have installed the gateway in a new oracle home directory:
"D:\oracle\product\10.2.0\db_1" => home directory of 10g
"D:\oracle\product\11.1.0\tg_1\" => home directory of the gateway
D:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\tnsnames.ora:
MSSQLDG =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = PEGASUS)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = DG4MSQL)
(HS = OK)
MSSQL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = PEGASUS)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = MSSQLTEST)
(HS = OK)
D:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = INTEGRAT)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(SID_NAME = INTEGRAT)
(SID_DESC =
(SID_NAME = MSSQLTEST)
(PROGRAM = D:\oracle\product\10.2.0\db_1\bin\hsodbc)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(SID_DESC=
(SID_NAME=DG4MSQL)
(ORACLE_HOME=D:\oracle\product\11.1.0\tg_1)
(PROGRAM=D:\oracle\product\11.1.0\tg_1\BIN\dg4msql)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = pegasus.cursor.de)(PORT = 1521))
D:\oracle\product\11.1.0\tg_1\dg4msql\admin\initDG4MSQL.ora:
HS_FDS_CONNECT_INFO=OBELIXUS/MSSQLSERVER/testuju
HS_FDS_TRACE_LEVEL=DEBUG
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVER
D:\oracle\product\10.2.0\db_1\hs\admin\initMSSQLTEST.ora:
HS_FDS_CONNECT_INFO=DSN_MSSQL
HS_FDS_TRACE_LEVEL=OFF
HS_LANGUAGE=AMERICAN_AMERICA.WE8MSWIN1252
HS_FDS_FETCH_ROWS=100
HS_RPC_FETCH_REBLOCKING=OFF
How mentioned above, the access from oracle to sqlserver using MSSQL(10g hsodbc.exe) works fine.
But when trying to acces the sqlserver using MSSQLDG (11g dg4msql.exe) I get the following error:
ORA-28500: Verbindung von ORACLE zu Fremdsystem gab diese Nachricht zurück:
[Oracle][ODBC SQL Server Driver][DBNETLIB]Ungültige Verbindung.
[Oracle][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (ParseConnectParams()).
[Oracle][ODBC SQL Server Driver]Ungültiges Attribut für die Verbindungszeichenfolge
ORA-02063: vorherige 2 lines von DBL_MSSQL4
Here the contect of the file "DG4MSQL_agt_2332.trc":
Oracle Corporation --- FREITAG AUG 22 2008 16:17:42.198
Heterogeneous Agent Release
11.1.0.6.0
Oracle Corporation --- FREITAG AUG 22 2008 16:17:42.198
Version 11.1.0.6.0
Entered hgogprd
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "DEBUG"
Entered hgosdip
setting HS_OPEN_CURSORS to default of 50
HOSGIP returned value of "RECOVER" for HS_FDS_RECOVERY_ACCOUNT
HOSGIP returned a value for HS_FDS_RECOVERY_PWD
setting HS_FDS_TRANSACTION_LOG to default of "HS_TRANSACTION_LOG"
setting HS_FDS_TRANSACTION_ISOLATION to default of "READ_COMMITTED"
setting HS_NLS_NCHAR to default of "AL16UTF16"
setting HS_FDS_TIMESTAMP_AS_DATE to default of "TRUE"
setting HS_RPC_FETCH_REBLOCKING to default of "ON"
setting HS_FDS_FETCH_ROWS to default of "100"
setting HS_FDS_RESULTSET_SUPPORT to default of "FALSE"
setting HS_FDS_PROC_IS_FUNC to default of "FALSE"
setting HS_FDS_CHARACTER_SEMANTICS to default of "FALSE"
setting HS_FDS_MAP_NCHAR to default of "TRUE"
setting HS_NLS_DATE_FORMAT to default of "YYYY-MM-DD HH24:MI:SS"
setting HS_FDS_REPORT_REAL_AS_DOUBLE to default of "FALSE"
setting HS_LONG_PIECE_TRANSFER_SIZE to default of "65536"
setting HS_SQL_HANDLE_STMT_REUSE to default of "FALSE"
setting HS_FDS_QUERY_DRIVER to default of "FALSE"
setting HS_CALL_NAME_ISP to "gtw$:SQLTables;gtw$:SQLColumns;gtw$:SQLPrimaryKeys;gtw$:SQLForeignKeys;gtw$:SQLProcedures;gtw$:SQLStatistics"
Exiting hgosdip, rc=0
ORACLE_SID is "DG4MSQL"
Product-Info:
Port Rls/Upd:6/0 PrdStat:0
Agent:Oracle Database Gateway for MSSQL
Facility:hsa
Class:MSSQL, ClassVsn:11.1.0.6.0_0006, Instance:DG4MSQL
Exiting hgogprd, rc=0
Entered hgoinit
HOCXU_COMP_CSET=1
HOCXU_DRV_CSET=178
HOCXU_DRV_NCHAR=2000
HOCXU_DB_CSET=178
HOCXU_SEM_VER=102000
Entered hgolofn at 2008/08/22-16:17:42
RC=-1 from HOSGIP for "PATH"
PATH from environment is "d:\oracle\product\11.1.0\tg_1\bin;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Programme\IBM\Informix\Client-SDK\bin"
Exiting hgolofn, rc=0 at 2008/08/22-16:17:43
HOSGIP for "HS_OPEN_CURSORS" returned "50"
HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
Exiting hgoinit, rc=0 at 2008/08/22-16:17:43
Entered hgolgon at 2008/08/22-16:17:43
reco:0, name:testuju, tflag:0
Entered hgosuec at 2008/08/22-16:17:43
uencoding=UTF16
Entered shgosuec at 2008/08/22-16:17:43
Exiting shgosuec, rc=0 at 2008/08/22-16:17:43
shgosuec() returned rc=0
Exiting hgosuec, rc=0 at 2008/08/22-16:17:43
HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
HOSGIP for "HS_FDS_TRANSACTION_LOG" returned ""HS_TRANSACTION_LOG""
HOSGIP for "HS_FDS_TIMESTAMP_AS_DATE" returned "TRUE"
HOSGIP for "HS_FDS_CHARACTER_SEMANTICS" returned "FALSE"
HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
HOSGIP for "HS_FDS_RESULT_SET_SUPPORT" returned "FALSE"
HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
using testuju as default value for "HS_FDS_DEFAULT_OWNER"
HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
Entered hgocont at 2008/08/22-16:17:43
HS_FDS_CONNECT_INFO = "OBELIXUS/MSSQLSERVER/testuju"
RC=-1 from HOSGIP for "HS_FDS_CONNECT_STRING"
Entered hgogenconstr at 2008/08/22-16:17:43
dsn:OBELIXUS/MSSQLSERVER/testuju, name:testuju
optn:
Entered shgogohn at 2008/08/22-16:17:43
ohn is 'OraGtw11g_home1'
Exiting shgogohn, rc=0 at 2008/08/22-16:17:43
Entered hgocont_OracleCsidToIANA at 2008/08/22-16:17:43
Returning 2252
Exiting hgocont_OracleCsidToIANA at 2008/08/22-16:17:43
##>Connect Parameters (len=223)<##
## DRIVER=Oracle 11g dg4msql-OraGtw11g_home1;
## SERVER=OBELIXUS\MSSQLSERVER;
## Database=testuju;
#! UID=testuju;
#! PWD=*
## AnsiNPW=Yes;
## QuotedId=Yes;
## IANAAppCodePage=2252;
## ArraySize=100;
## PadVarbinary=0;
## SupportNumericPrecisionGreaterThan38=1;
Exiting hgogenconstr, rc=0 at 2008/08/22-16:17:44
Entered hgopoer at 2008/08/22-16:18:00
hgopoer, line 159: got native error 14 and sqlstate 08001; message follows...
[Oracle][ODBC SQL Server Driver][DBNETLIB]Ungültige Verbindung.[Oracle][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (ParseConnectParams()).[Oracle][ODBC SQL Server Driver]Ungültiges Attribut für die Verbindungszeichenfolge
Exiting hgopoer, rc=0 at 2008/08/22-16:18:00
hgocont, line 1890: calling SqlDriverConnect got sqlstate 08001
Exiting hgocont, rc=28500 at 2008/08/22-16:18:00 with error ptr FILE:hgocont.c LINE:1910 ID:Something other than invalid authorization
Exiting hgolgon, rc=28500 at 2008/08/22-16:18:00 with error ptr FILE:hgolgon.c LINE:612 ID:Calling hgocont
Entered hgoexit at 2008/08/22-16:18:00
Exiting hgoexit, rc=0 at 2008/08/22-16:18:00
Many thanks in advance for any help!
Regards Hartmut

At first your configuration is not really correct.
=====================================================
In the LISTENER.ORA from 10g, you must only refer to the database and hsodbc 10g
D:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = INTEGRAT)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(SID_NAME = INTEGRAT)
(SID_DESC =
(SID_NAME = MSSQLTEST)
(PROGRAM = D:\oracle\product\10.2.0\db_1\bin\hsodbc)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = pegasus.cursor.de)(PORT = 1521))
===========================================================
Then you have to create a new listener (new name) in the gateway oracle_home on a different port than instance database:
D:\oracle\product\11.1.0\tg_1\network\admin\listener.ora
SID_LIST_LISTENERGTW =
(SID_LIST =
(SID_DESC=
(SID_NAME=DG4MSQL)
(ORACLE_HOME=D:\oracle\product\11.1.0\tg_1)
(PROGRAM=D:\oracle\product\11.1.0\tg_1\BIN\dg4msql)
LISTENERGTW=
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = pegasus.cursor.de)(PORT = 1522))
To start it, use the command below:
D:\oracle\product\11.1.0\tg_1\bin\LSNRCTL start listenergtw
===========================================================
D:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\tnsnames.ora:
match the DG4MSQL with the listener on 1522 port
HSODBC match with binary10g on listener 1521 port
MSSQLDG =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = PEGASUS)(PORT = 1522))
(CONNECT_DATA =(SERVICE_NAME = DG4MSQL))
(HS = OK)
MSSQL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = PEGASUS)(PORT = 1521))
(CONNECT_DATA =(SERVICE_NAME = MSSQLTEST))
(HS = OK)
Try to configure and let me know your feedback
regards,
Mireille

Where to download Netweaver 7.0 for SQL Server

Hi,
Can anybody please tell me where i can download Netweaver 7.0 installation for MS SQL Server database.
I've searched all over the market place, but the only thing i've found is Netweaver 7.0 SR2 for Oracle database.
Edited by: Vladimir Karev on Mar 14, 2008 5:41 PM

Ddi you check
http://service.sap.com/swdc
If you have licensed for SAP w/ MS SQL database it will show up there.
Thanks
Prince Jose

Transparent gateway to Sql Server losing the "\" in the SqlServer Connect s

HS_FDS_CONNECT_INFO="Sql2k5-Stats/SQL2K5-STATS\SQL2K5STATS/AZDPS"
No matter what we [inc Oracle support] put in here, somewhere it gets removed before it hits Sql Server
it gets turned into Sql2k5-Stats\SQL2K5-STATSSQL2K5STATS and sqlplus barfs an error about not being able to connect to remote and that is because the "\" has been removed.
Have tried numerous combinations for HS_FDS_CONNECT_INFO
Any ideas out there ?
Edited by: IanSparkes on Jun 23, 2009 12:01 PM

When connecting to SQL Server instances, you can define a SQL Server alias using the MS Client Configuration Tool or you can use two back slashes:
HS_FDS_CONNECT_INFO="SQLSERVER\\instance2.Northwind"
or using the SERVER and DATABASE naming convention:
HS_FDS_CONNECT_INFO="SERVER=<SERVER NAME>\\<INSTANCE NAME>;DATABASE=<DATABASE>"

Transparent gateway to SQL Server performance

I have a view created in Oracle on some tables in an SQL Server database.
When I run a select on the view it takes very long to complete. Several minutes in fact.
When i run the select that the view is built "as" (create view v_name as select....)
it completes in just a few seconds. Is there some type of performance hit when you select from a view built in Oracle that includes tables from SQL Server?

assuming your mentioned query running on Oracle, you can check the execution plan and statistics of two different behavior with sql*plus autotrace option - http://www.bhatipoglu.com/entry/17/oracle-performance-analysis-tracing-and-performance-evaluation

Security Update for SQL Server 2008 R2 Service Pack 2 (KB2977320)

So i have been trying to install this update on one of our servers since it is showing up on our MBSA scans but it has been failing on one of our machines with the error code: 0x80070643
I downloaded the update and tired to install it manually. The installer returned: There are no SQL Server instances or shared features that can be updated on this computer. If that was true then why is SCCM still pushing the update to the machine and why
is the MBSA showing that it needs the update? Any advice would be helpful. Thanks!

Hi David,
Based on my understanding, the error code: 0x80070643 was thrown out when you install KB2977320 with MBSA. And installation also failed when you download and install update manually.
Regarding the error code: 0x80070643, it can be caused if the MSI software update registration has become corrupted, or if the .NET Framework installation on the computer has become corrupted. To fix this issue, we can follow these methods:
Fix MSI software update registration corruption issues
Repair the .Net Framework
Uninstall and reinstall the .Net Framework
For more information, please refer to this link:
http://support.microsoft.com/kb/976982.
Besides, the security update is released for SQL Server 2008 R2 Service Pack 2, please check the version of SQL Server you are using. About how to check the SQL Server version, please refer to this article: How to tell what SQL Server version you are running
(http://www.mssqltips.com/sqlservertip/1140/how-to-tell-what-sql-server-version-you-are-running/). Then please download the Security Update for SQL
Server 2008 R2 Service Pack 2 from this link (http://www.microsoft.com/en-us/download/details.aspx?id=43957), and retry install it manually.
Best regards,
Qiuyun Yu

SQL Server 2012 Cumulative update package 2 (CU2) for SQL Server 2012 Service Pack 2 - why only for x86 ?

Hey guys...
Im a little bit confused... i wanted to download the newest hotfixes for SQL server 2012...
But the download for :
2983175 Cumulative update package 2 (CU2) for SQL Server 2012 Service Pack
is only for the platform: x86 available ... but my SQL server 2012 is running in a x64 environment...
(when i checked the older cumulative updates... they're all only for x86.. can someone tell me why ? )
thanks and regards,
Dominic

There doesn't exist an SQL Express "Standard". It's two different editions.
For Express there are three 32bit/64bit editions:
Express, Express with Tools and Express with Advanced Services.
Express with Tools is essentially Express with Management Studio Tools, Express with Advanced Services adds also BI (Business Intelligence) + Reporting Services.
As for where you can apply the cumulative update, on the link you can see this:
Microsoft SQL Server 2012 Service Pack 2, when used with:
Microsoft SQL Server 2012 Analysis Services
Microsoft SQL Server 2012 Developer
Microsoft SQL Server 2012 Enterprise
Microsoft SQL Server 2012 Express
Microsoft SQL Server 2012 Business Intelligence
Microsoft SQL Server 2012 Standard
Microsoft SQL Server 2012 Web
"If there's nothing wrong with me, maybe there's something wrong with the universe!"

MS14-044 for SQL Server 2008 Standard on Windows Server 2003?

MS14-044 was recently released and states that it applied to MS SQL Server 2008 SP3, yet the patches available for this security bulletin do not list Windows Server 2003 in the supported operating systems. Does MS14-044 not apply to SQL Server running
on Windows Server 2003? If it does apply, why isn't there an update available to run on Windows Server 2003?

Hi Chasg76,
According to your description, the patches available for MS14-044 do not list Windows Server 2003 in the supported operating systems and you want to know whether MS14-044 applies to SQL Server running on Windows Server
2003.
Based on my test, KB2977321 applies to SQL Server 2008 Service Pack 3 product and it does apply to SQL Server 2008 SP3 running on Windows Server 2003.
I installed SQL Server 2008 Service Pack 3 in Windows Server 2003 SP2 x86. After the service pack 3 installation completed, KB2977321 was offered in the Automatic Update.
Besides, you can manually install the update by downloading the update form the Download Center web site as well.
I also tried the manually installation and I downloaded the Security Update for SQL Server 2008 Service Pack 3 (KB2977321) from this web: Security Update for SQL Server 2008 Service Pack 3 (KB2977321) (https://technet.microsoft.com/library/security/MS14-044),
it was installed successfully.
After installed security upgrade, I checked the file attributes and compared to this article: MS14-044: Description of the security update for SQL Server 2008 SP3 (GDR): August 12, 2014(http://support.microsoft.com/kb/2977321/en-us).
The result is the same.
According to my test, MS14-044 applies to SQL Server running on Windows Server 2003 even though Windows Server 2003 is not listed in the supported operating systems.
Best regards,
Qiuyun Yu

Help Configuring Transparent Gateway for Ms Sql Server

I have Installed Oracle 9.2.0.1.0 with Transparent Gateway for Ms Sql Server.
Followed the configuration furnished therein the Documents for Tnsnames.ora & Listener.ora.
Connection to Sql Server 2000 is NOT SUCCESSFUL. Trace File contents from Tg4sql is furnished below :
Oracle Corporation --- WEDNESDAY DEC 18 2002 22:32:50.625
Heterogeneous Agent Release
9.2.0.1.0
HS Agent diagnosed error on initial communication,
probable cause is an error in network administration
Network error 2: NCR-00002: NCR: Invalid usage
Note :- Sql Server & Oracle Server are on the same Machine running of Windows 2000 Server.
Am i missing something !!!
TIA

Please guide me, would appreciate your suggestions to solve this heck....
TIA

Oracle Transparent Gateway for MS SQL Server

Hello,
I successfully installed the Oracle transparent Gateway for MS SQL Server for Oracle 8i. Now I am doing the same for Oracle 9i.
Does anyone know how to 'create a new gateway service' on 9i???
This is how you would do that on 8i on the Windows box...
1) At the MS-DOS prompt, enter:
> set GTW_EXE=TG4MSQL.EXE
2) To create a new gateway service name, enter:
> GTWSRV73 sid -CREATE | MORE
-where sid is the gateway sid.
Does anyone know how to do those steps for 9i Oracle Transparent Gateway?
Thank you.

Hi
I need oracle Tranparent Gateway for Microsoft Sqlserver (tg4msql) for oracle 10g on linux x86-64 bit. I have searched for it on otn.oracle.com and on edelivery.oracle.com. But couldn't find it.
Can any one help me in this regard.
Regards
Nadir.

Download for SQL Server machine running Windows Server 2008 Enterprise SP2

I am confused what 11g product to download and how to configure for the above server. I just need for SQL Server 2008 to be able to communicate with some Oracle databases. I don't need to manage the Oracle database, nor do I need to create one. I just need to be able to create linked servers, use SQL Plus, and create some SSIS or DTS packages that will bring Oracle data into the SQL Server. I think I just need the client, but for 11g, I see it is less than 1GB in size. I am afraid I may be missing something because I thought the client downloads were about 2GB, but the 2GB downloads are not called "client". This is a 64bit machine running an Intel Xeon X7460 chip.
Our server has a C:\, D:\, and E:\ drive on it. The data (.mdf) is on drive E:\. The normal environment is on C:\ like usual. I also need to know if I need to set environment variables which I read about, but am not sure how to set them and make them stay, or if the software does that.
As an aside, I tried installing a 10g on there that the DBA downloaded and could never get it to work, although I was successful in getting tnsping to work, but SQLPlusW would close on me when I tried to connect and SQLPlus failed with some error but can't remember what right now. I uninstalled it. I think it may have been the wrong download.
I would appreciate any info at all, even if you don't know about everything said here.
I have a link here where I think I am close, but I still am not sure. Let me know if this is correct and which link to click. If I am wrong, please provide the correct link if you can. Thank you.
[http://www.oracle.com/technetwork/database/enterprise-edition/downloads/112010-win64soft-094461.html]
Edited by: user486992 on Oct 20, 2010 11:07 AM

Hi,
To integrate Oracle with SQL server you need the following
Install Oracle 11g Release 2 client software
Install Oracle 11g Release 2 ODAC software
Restart SQL services
Configure OraOLEDB.Oracle provider
Create linked server
Add remote logins for linked server
see this links
http://www.mssqltips.com/tip.asp?tip=1433
http://www.easysoft.com/applications/oracle/database-gateway-dg4odbc.html :)

Any one can provide me a free JDBC dirver for SQL Server 7.0

I have searched it on microsoft web site, but I can only find it for SQL Server 2000, is anybody can provide me a free JDBC dirver for SQL Server 7.0?
Thanks a lot!

cheers chiliast,
yeah aveconnect trial version did expire
after 30 or something.. days.. and it did provide unlimited no of
connections ..
We found it to be really worth a try and even buy..
I think that for commercial purposes and serious programing,
its better to buy a driver, because all the better ones are
evaluation versions :-( , and there are no many free drivers
around.
anyway if you really need a free driver,..
there is an open source driver from the Free TDS..
see
http://www.freetds.org/
It does have some limitations in functionality, but supports sql 7.
hope it helps,
Jer

Free download of transparent gateway for SQL Server

Similar Messages

Maybe you are looking for