FreeHand installation - New activation procedures

Take note that are new activation procedures for Macromedia software installation.
“When trying to activate your Creative Suite 2, Acrobat 7, or Macromedia products you may receive an error that the Activation server is unavailable. As of December 15th [2012] the activation servers for these products will be shut down.”
http://forums.adobe.com/thread/1114930
How to activate new installations of Macromedia branded products:
http://helpx.adobe.com/x-productkb/policy-pricing/macromedia-legacy-activation-error.html
Judy Arndt

Thanks for your fast answer.
I have not been able to run once the program. I installed it and when I lauched it I get a message saying that the Key Code is missing or has expirated (altough I just installed it!). Then I input the one I got in the installation pack and it says it is invalid.
I followed your instructions, but in the register there is no folder "Xcelsius".
On the contrary, I have seen that although I desinstalled the version Crystal Xcelsius Professional, I still have a folder with in the register (Suite 11.5 --> Crystal Xcelsius Professional) with the serial code from the previous version. And I also have a folder in c:\Program files\Business Objects... is this ok? Could it be the reason for the problems? Isnt't it removed when desinstalling Crystal Xcelsius Professional? Should I remove it manually?
Another thing: I already downloaded from your site the SP 1: cx2008_sp1
When running the Setup first it desinstalled Xcelsius Engage and then it installed the SP1, is this also ok? Seems a bit strange...
Thanks for your help!
Regards,
Nuria

Similar Messages

Problem with installation and activation

Hi, I have a problem with the installation of Adobe Muse.
I had a free 30-days trial, when it was over I bought the product ($ 13 per month),
I installed the program again and I see the same window with the finished Trials
and it requires a serial number and does not allow to enter the program.
I installed the program on your PC wife without any problems, but I can not install it on a laptop.
I have a laptop with Windows 8 operating system.
What I've done:
1. Uninstalled the free program,
2. check the connection to the Internet,
3. has installed a new program from the official website adobe.com,
4. Remove the line for the activation of the hosts file and resave the file,
5. turned off the brandmower,
6. rebooted.
I can't get support for a 3 days, is it the most terrible support I've ever seen? I dunno
Please help me at [email protected]

I guess this stuff helps me
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
2014-08-07 20:07 GMT+07:00 Дмитрий Броский <[email protected]>:
thanx
>
2014-08-07 18:18 GMT+07:00 Prabhakar.Kumar <[email protected]>:
problem with installation and activation created by Prabhakar.Kumar
>> <https://forums.adobe.com/people/Prabhakar.Kumar> in *Help with using
>> Adobe Muse CC* - View the full discussion
>> <https://forums.adobe.com/message/6619532#6619532>
>>

How to create a new Activity with report

I would want to know how I do to create a link in a report that connects me to the page of the Client to add a new record of activity if i want.
Substantially this link allows me to create a new activity in an agency that I directly select from the report.
Thank Vale.

Hi
You should use the observer user for performing read-only operations.
This is one of the users that is created when you installed AccAD.
Here is the section that mentions it from our administration guide:
You are asked to provide passwords for the root, admin, and observer
users. Make note of these passwords since you will be required to provide them later.
When the installation is complete, log out root and log on again as admin.
Important
Perform any additional operations using the secured admin account. You can use the observer account to access the AccAD Administrator web UI in read-only mode only; this user cannot log on to the machine.
Best,
Zeev

How cna I deactivate multiple CS products and get new activation keys for them?

I need to know how to deactivate all active installs of a given CS product and serial #, then get new activation keys for the same product. I realize this is a question only an Adobe rep can answer, but online chat is closed and the phone support line is completely useless, so I have to ask here.
-- Jon W.

you'll need to contact adobe support to reset your activation count for each product if you are unable to do that yourself, http://helpx.adobe.com/x-productkb/global/service1.html
you will not get or need a new activation key. your original one will still work for cs3 and later.

New activation code for Elements

Hi,
My pc's hard drive recently failed , and I have replaced the pc with a Mac mini. Unfortunately, I cannot access the pc to deactivate the licence to allow me to activate it on the mac. Could you please help with this by providing a new licence code or tell me how to work around it?
Best regards
Jerry Filmer
[email protected]

Jerrysmac,
I agree that you need to contact Adobe Customer Support (not Technical Support), as they can reset your installations and activations.
As this is for Ps Elements, I will Move the post to the very good, and active Ps Elements Forum. Your link, and any e-mail subscriptions will follow.
Good luck,
Hunt
[Moved to Ps Elements Forum]

Comment installer et activer cs6 sur mon pc?

je n'arrive pas à réinstaller cs6 que j'ai désinstallé

Bonsoir,
Un grand merci à Andres, en suivant votre lien et après quelques tâtonnements, que je serais incapable de réexpliquer à posteriori, j’ai finalement réussi à réinstaller cs6 avec mon numéro de série et tout fonctionne de nouveau!
Merci beaucoup
sylvie
Le 4 nov. 2014 à 12:02, Arnaud Mélon <[email protected]> a écrit :
comment installer et activer cs6 sur mon pc?
created by Arnaud Mélon in Forums en français - View the full discussion
Bonjour Sylvie,
N'hésitez pas à nous informer de la suite du problème.
Est-ce que la solution donne par Andres a fonctionné?
Merci.
Arnaud.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6897518#6897518
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Forums en français by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

New Uninstall Procedure?

Is there a new uninstall procedure for Final Cut Server 1.5?
I need to remove all traces and figure out the command-line installation parameters using the installer command, but no matter what I do, it still sees pieces of the old install. It doesn't ask for a Serial Number, media locations, etc, and declares itself an 'upgrade'.
I've already gone through and tried deleting everything at http://support.apple.com/kb/HT1764
I'd really love to not need a complete reformat, but it seems like that may be the only option....

That gets most of it, but after some digging, it appears with Final Cut Studio and Final Cut Server, the /Library/Application Support/ProApps folder no longer contains individual System ID files, but rather one ProAppsSystemID item that contains the key information for all ProApps, and is not an easily editable file. Looks like I'll have to uninstall the entire suite.

Creation of a new pricing procedure by copying existing one (for sale order

Hi,
Existing pricing procures are here below:
1000     10     00     1     1     ZBRI01     Pricing Proc_Under Con                            1000     10     00     1     2     ZBRI02     Pricing upgradationFlat
Now I need to create a new pricing procedure for the following combination :
1000     10                 00                 1                     3                   ZBR103        Pricing_single sale
Please let me know the steps to follow.
With regards,
Parijatha

Dear JP,
Based on your last direction, I created a pricing procedure. It is hitting the right GL and everything looks ok. My problem is " ZCAR (car park value which is a ZFREE item should get added to the "Net value" which is not happening.    Control data -reference step overview is herebelow.   From step 50 to 300 all are ticked for Statistics.
50     0     ZBAV     Base Value for Calc     0     0               0     0     0
110     0     ZTCO     Apartment Value     0     0               0     0     0
115     0     ZDSQ     Discount on ApT     0     0               0     0     0
120     0     ZDVA     Discount on ApT_Lump     0     0               0     0     0
150     0     ZTGR     Terrace/garden Stat     0     0               0     0     0
160     0     ZDTG     Discount on Terrace     0     0               0     0     0
210     0     ZCAR     Car Park (booking)     0     0               0     0     0
250     0          Total Consideration     110     210               0     0     0
270     0     ZGOV     Govt Rate_Reg     0     0               0     0     164
300     0          Upgradation Value - Billing     250     270               0     0     0
310     0     ZBLD     Building - For Bill     270     0               0     0     164     ZBB
320     0     ZSDT     Reg and Stamp Duty     0     0               0     0     0     ZSD
330     0     ZSDA     Stamp duty-Agr-Sell     0     0               0     0     0     ZSA
340     0     ZECH     Power Consump. Chgs     0     0               0     0     0     ZEC
350     0     ZLFE     Legal Fees     0     0               0     0     0     ZLF
360     0     ZPTX     Property Tax     0     0               0     0     0     ZPT
Can you please help me what should I do to add ZCAR (item category is ZFREE) value to Net value.
With regards,
Parijatha

Problem with new pricing procedure - free of cost

i set up a new pricing procedure where i have zsed (special excise duty) and zmws (sales tax) set as manual, it's not valid on some free sample orders. but when i goto create order it does not show up under conditions, even though i've maintained it for that material in vk11. and when i click on condition type in conditions, it doesn't show up in the drop down either (at the order level). if i just type zsed it says zsed cannot be processed manually.
but if i change the pricing procedure and take off the manual check mark, the tax shows up on the same order automatically (from vk11) but i can't delete it there.
suggestions? i need for it to show up or have an option where if it shows up i can delete it. thanks!

fyi,
If you set the "Manual" indicator in pricing procedure against to any condition type, then you can enter this condition type value in particular transaction. ( But for this condition type details, " changes can be made- setting maintain as "D" not possible to process manuall). Same "manual" logic in the pricing procedure will not work.
Because controls in Condition type has priority than anyother.
Now coming to your question,
If I understood it properly,
ZSED is not applicable to every free of cost order, but it may be applicable to other orders ( excl: FOC orders). Expecting ZSED Condition type maintained in both pricing procedures ( FOC sales pricing procedure & non FOC sales procedure).
if you set the " Manual entries has priority"/ tick mark delete check box in ZSED, then it will allow to enter manually/delete the condition type in FOC order as well as non FOC orders too.
Then there could be chance that user may delete/manually enter ZSED in non FOC sales.
better way would be, create new conditiont table by including Sales document type ( assume you created new document type for FOC sales) with other required fields ( eg: customer/material etc..,).
assign this condition table in top of all the accesses in ZSED's access sequence.
Maintain Condition record.
By doing so, Condition record is applicable only to FOC doc type sales- if maintained , else it will search next condition record.
which will not effect the non FOC sales & user cant delete ZSED from non FOC sales.
Hope it helps

How we can configure new pricing procedure at the time of billing document

Hi SD Gurus,
Can u plz tell me how we can configure new pricing procedure at the time of billing document level.
Thanks & Regards,
Sreenivas.P

Hello,
Why?
The sales order confirms the price given to the customer. If you have re-determined a new price/discount then you may consider in VTFL to use pricing type C.
Regards
Waza

IC Webclient: Adding new activity

Hi All,
Could you please tell me the steps of adding new activity (Business Activity) in IC Webclient Framework.
Thanks
PD

hi
In general these are the steps
     Define a transactional launcher profile.(Menu Path: IMG ->CRM-> IC WebClient ->Transaction Launcher
->Define Transaction Launcher Profile)
     Create a navigational bar profile.(IMG ->CRM-> IC WebClient -> Navigation Bar-> Define Navigation Bar Profile )
     Create a new button by creating a new entry to your navigation Profile(IMG ->CRM-> IC WebClient -> Navigation Bar-> Define Navigation Bar Profile Wizard)
     ID in navigation bar profile should be the same as your transaction launcher profile (IMG ->CRM-> IC WebClient-> Transaction Launcher -> Configure Transaction Launcher Wizard)
Award points if helpful

New Rebate procedure set up steps

Dear All,
I am working on setting up of new rebate procedure.
1. I have done the info structure S136 setting to update synchronously in OMO1 transaction.
Now I am trying to populate the old billing documents in the info structure S136 using transaction OLI9, but is not working.
After I found out that first I need to execute OLI7 & OLI8 transactions to update the orders & deliveries in the table MCVSRFK.
After doing all these things when I execute OLI9 still the billing document is not updated in the info structure table S136.
Could you please guide me on the correct process so that I can use the new rebate procedure effectively.
Thanks for your help in advance.
Best regards,
Sharan

Hi
Create rebate Agreement -VBo1
Create Sales Order-VA01
Create Delivery - VL01N
Create Billing-Vf01
Update Billing document-VBOF
Check sales voule in rebate agreement -Vbo2
Perofrm periodic parial settlement- RBT_ENH_VB7
Thanks.
Vasu

How to activate new pricing procedure for old Pur Document

Dear all,
we have added some condition type in our pricing procedure,every thing is ok but my question is this new condition added in pricing procedure are not reflecting in previously created purchasing document/po, how can we do it
I kw that if we create new po all condition will be reflec as per in pricing procedure
shakir

Hi
Assign Document pricing procedure Z in VOV8 for CR document type , Now do the pricing procedure determination in OVKK with sales area + Cupp+Dupp=new pricing procedure
Example :
In OVKK, determine with 1000 + 10+ 10 + A+ 1 = standard pricing procedure for normal sales
For credit memo in OVKK determine with 1000 + 10+ 10 + Z+ 1 = New pricing procedure for Credit memo
Then when you create a sales order (with document type CR ) with reference to billing document then the new pricing procedure will get copied.
Regards
Srinath

How to replicate a new pricing procedure from SAP ERP?

Dear Experts,
I have set up a new pricing procedure in the ERP backend and I would like to replicate this to SAP CRM.
A replication using object DNL_CUST_CNDALL has been executed once in the past.
What would be the best way for me to download the new pricing procedure without overwritting any of the existing pricing settings in SAP CRM?
Thanks,
Dan

Hello Dan,
The views in CRM pricing customizing do not allow to change the pricing procedures, condition types and access sequences that have been downloaded from the ERP system. You will see a field in customizing Source System with value A indicating that these were not created originally in CRM and the view does not go to edit mode.
In case a i.e. condition type had been created originally in CRM with the same name as a condition type that exists in the ERP the download of the adapter object will not delete the condition type that was created in CRM.
Therefore it is safe to execute the initial download of the adapter object DNL_CUST_CNDALL without filtering. If you have many pricing procedures in the ERP and you do not want to transfer its customizing to CRM you can create your own adapter object by copying the content of DNL_CUST_CNDALL ( to be on the safe side and keep the original) and then add a filter in your adapter object ,for example in pricing procedures using field KALSM of table T683S, including all the pricing procedures that must be transferred to CRM u2013 those that were transferred in the past and the one that you want to transfer now .However this filter is optional, most SAP customers do not change the standard filters.
The usual options are:
-- Download only DNL_CUST_CNDALL (or a Z object that was created based on DNL_CUST_CNDALL) which contains client dependent and also independent customizing ( i.e access sequences, condition tables). Condition tables may be generated too and it can take longer, maybe up to 45 minutes or so.
-- If you have made changes only to pricing procedure(s) or condition types u2013 client dependent customizing-- it will be enough if you download only DNL_CUST_PRC. As there is no generation of condition tables the download will be faster.
But you must consider that you should not download both adapter objects at the same time ( overlapping times), as part of the content being downloaded is the same and the database will be inconsistent. This can cause errors in pricing, not a severe issue, as it can be solved by a new download of DNL_CUST_CNDALL, but an issue that causes trouble as it is sometimes difficult to determine the root cause of the problem. So if you for whatever reason ( i.e. additional changes in a condition type) download both adapter objects you should always check R3AM1 and download the second object when the download of the first one has finished ( green light in transaction R3AM1)
Best Regards
Luis Rivera

NOT specify new DataSource for every new stored procedure?

I'm in a solution where I'm having multiple reports, and I want to create my reports one at a time, create a stored procedure for it, then create a report for that stored procedure, then go on to the next report in the same way. The problem is that
in Visual Studio, the DataSource does not update to recognize the new stored procedure, so I have to keep creating a new data source each time. Is there any way around this so I don't have to create a million data sources?

Hi jiwakersm,
I will answer your questions one by one:
Report Builder vs Report Designer:
• Report Builder is available in two versions: stand-alone and ClickOnce. The stand-alone version is installed on your computer by you or an administrator. The ClickOnce version is installed automatically with SQL Server 2012 Reporting Services (SSRS)
and downloaded to your computer from Report Manager or a SharePoint site integrated with Reporting Services.
• Report Designer in Business Intelligence Development Studio is a report authoring environment that is hosted in Microsoft Visual Studio.
If we want to
create an .rdlc report file, we should use ReportViewer control in an application project or a Web site. If we want to open an .rdlc report file, we should open the project or web site in Visual Studio. Note that Report Builder and Report Designer are not
included in Visual Studio.
As to the Report Data pane, we should click one report in the Solution Explorer, then select Report Data after clicking View button in the menu pane. The document said that “create a data source reference, and then select the new option.” means we should
create a shared data source in advance (we can create it in Solution Explorer), then use it as data source. If you are create .rdlc report in Visual Studio, we couldn’t create shared data source. But we can create one data source, then use it to create several
reports in the same project.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

FreeHand installation - New activation procedures

Similar Messages

Maybe you are looking for