Freetalk connect me adapter doesnot work suddenly

I've using freetalk connect me adapter from Nov, 2011, but after six months adapter doesn't work suddenly. I don't make any change with my network or computer or anything. What I know yesterday it works and today it suddently doesen't work. Any I also subscribed with skype and payed in time. My account is in good condition.
Until now I cannot use this adapter any more, how to fix this problem?
by the way, my internet is in good condition with timewarner high speed 10m.

AVAYA2012 wrote:
What I know yesterday it works and today it suddently doesen't work.
Hello,
We'll bring this to the attention of the hardware suppliers and ask for an investigation.
The suppliers may request additional information from you.
We don't support duplicate posting so I've deleted your second post. Please use only this thread for your issue. Thank you.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Similar Messages

  • Freetalk Connect Me Adapter for Skype

    Hi. I had seen many reviews about this product. Can any one tell how can I check my voicemail from this device? Your answer will really appiriciate. Thank you.
    Solved!
    Go to Solution.

    I have received email reply from eBuyNow Support.
    Dear Customer,
    You are receiving this email because you have recently purchased our Freetalk Connect Me Skype Home Phone adapter. We would like to take this opportunity to let you know that eBuyNow will soon release a software upgrade for your device. The upgrade procedure is automatic, however it does require your immediate attention. In order for it to process seamlessly, we have to ask you to verify your settings in the Freetalk Connect Me administration interface.
    Please follow the following steps:
    1 . Go to the administration interface as described in the "Quick Setup Guide", Step 6, that you had received with your Freetalk Connect Me. If you don't have the Quick Setup Guide with you, there is an online version available on our website. Please click here
    2. If you have previously configured your device, you will be taken to the login page. Please login with your Skype credentials.
    3. The administration interface will load. Please click on "System Settings" menu option.
    4. Under the "Firmware" section, please populate all the fields with your desired settings. Important: Please ensure that an e-mail address is entered. Click on "Save Settings".
    NOTICE:
    If you haven't used your device before and it hasn't been installed, please do so now by following the steps in the "Interactive Install Guide" online
    Over time your FREETALK Connect Me will update automatically, please try to leave it powered up and connected to your network.
    Kind regards
    Happy Skypeing,
    eBuyNow Ltd
    Product Development Team
    Hope this will help all Freetalk connect me owners.
    Thank you

  • Freetalk Connect•Me adapter

    Hi,
    I'm interested in how the adapter works. I tried looking for reviews and setup guides to no avail.
    From my understanding, the adapter gives a regular phone the ability to be used on Skype. However I have a few questions regarding the adapter.
    1. If you're only using a phone with a regular adapter, how do you dial your Skype contacts?
    2. Will I still be able to connect my phone to a regular landline along with the adapter?
    Solved!
    Go to Solution.

    I am looking into skype as my home phone.
    1.) Does your home computer have to be on all the time if you utilize this adapter?
    2.) If I understand, a normal home phone will work with this adapter?
    Thanks,
    Dan

  • Freetalk Connect Me - Suddenly Stopped Working

    I have the Skype service with a FreeTalk Connect Me box that we use as our landline phone. This has been in service for around 6 months without a hiccup, until recently. About a week ago it out of the blue would not make nor receive any calls. When you try to dial out it I have a dial tone, you hear it enter the numbers, and it makes the little doot-doot-doot-da-doot-doot jingle (my apologies for trying to type that phonetically) but does not ring. When trying to call the number it may ring a time or two and then says in a British voice (paraphrasing) "the Skype subscriber you have called is not available" and sends it to Skype voicemail.
    The light on the front of the box is blinking green as it is supposed to but nothing works. I have tried unplugging the box for an extended period of time but that has been my only attempt at diagnostic repair. I need this phone to be operational. Please help.
    Thank you in advance,
    Brian

    When mine does that, a power cylce fixes it.  In your case, I would suggest power cycling your router as well.  The device is pretty much plug-n-play so you are limited in what you can do.  You can also try to reset the device to factory default by either:
    1.  Browsing to the IP address of the unit.  You can get this off your router or by browsing your network places and double clicking the the Freetalk device icon.  
    Once there, log on, then click "System Settings" - "Factory Reset" (located at the bottom of the page)
    2.  Using the reset button on the unit itself.  Excerpt from the Freetalk website:  
    "To initiate factory reset, use a paper clip to press and hold the reset button on the device for as long as it takes for the LED to go off, and keep on holding it until the LED turns red again, then release. When this is done, give the device some time to load the software. The LED will start flashing green indicating you can access the configuration interface again."
    If done properly, you will have to complete the same Setup Wizard you ran when you first installed it.

  • The FREETALK Connect•Me Home Phone Adapter for Sky...

    Hi all,
    I am seriously considering dropping my landline since I mostly if not only uses my iPhone as my primary device for calls. The problem I have is an alarm system is connected to my land line and requires a way to call the alarm centre in case of an emergency.
    I talk to my alarm service provider for an alternative. They already have the cellular option, but it adds $12/m which is not a big saving... They are working on finding an IP/Internet solution, but it will be also a $4/m.
    I was wondering if I could use the FREETALK Connect•Me Home Phone Adapter for Skype as a solution. From a computer I can call any 1-800 numbers for free, and I really suspect that the alarm centre is a toll free number too. So in theory it could work.
    Can anyone share their experience with the device and suggest if my solution can work or not?
    Thanks

    I use that adapter in my house, it works just as a normal landline would.  There is a slightly longer predial delay when initiating a call (approx 3 second Skype dialing noise), beyond that no real difference.  If the box doesn't lock up, or your Internet doesn't go down it should be rather reliable as a replacement.  Those are worst-case scenarios and I generally don't find myself having to do anything to maintain it.  In any case I have it connected to a power surge strip like I do the rest of my equipment.  Should I need to reset it, I just toggle the switch.

  • FREETALK Connect-Me phone adapter discontinued

    I noticed today that the FREETALK Connect-Me phone adapter has been discontinued. Is there a replacement solution? My device has been working great for several years and I use it all the time for connecting my home phones to skype.

    That's always a possibility.  However I'm not aware of it being discontinued by the manufacturer.  You can generally buy it from the Freetalk site (http://freetalk.me/). Occasionally I've seen it disappear from the site (like now) when they are out of stock, then reappear again.  It's also available on Amazon and Ebay.
    Some people have used the Soundwin SP110, but there have been a lot of stability/quality issues with that device.  http://www.soundwin.com/style/frame/templates3a/product_detail.asp?lang=2&customer_id=824&name_id=40...

  • I have the G Drive 1 TB (GEN4 1TB) external drive purchased in 2010. I need to connect to my new MacBook Pro. I'm using the external drive for media storage of my video editing projects. Will a 800fw to thunderbolt adapter cable work?

    I have the G Drive 1 TB (GEN4 1TB) external drive purchased in 2010. I need to connect to my new MacBook Pro. I'm using the external drive for media storage of my video editing projects. Will a 800fw to thunderbolt adapter cable work? I understand that using a USB port connection is not fast enough for video editing. I read somewhere the G Drives don't connect well to MacBook Pro.
    thanks
    larry

    I doubt this can be relocated or moved so you might want to just repost in the macbook pro area.
      MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os?view=discussions
    Can you afford a new Thunderbolt case and cable? any case with FW800 is going to be slow 72MB/sec and less, and any new 1TB drive is capable of 75MB/s minimum up to 125MB/sec.
    Thunderbolt storage can of course when setup properly reach 100's of MB higher using multiple drives.
    Use what you have for a system backup or for secondary backup storage.
    you might be able to take the drive - most cases allow you to open and swap drives - and use this:
    G-Technology 1TB G-DRIVE mini High-Speed Portable Hard Drive                                   
    or this:
    http://store.apple.com/us/product/HB137VC/A/g-technology-4tb-g-raid-professional -high-performance-dual-drive-hard-drive?fnode=5f

  • Hi, i am in a wifi (macbook pro) works fine but ipad2 and iphone doesnot work but shows as connected into wifi ? anybody can help

    hi, i am in a wifi (macbook pro) works fine but ipad2 and iphone doesnot work but shows as connected into wifi (wifi defenetley works) ? anybody can help

    Make a Genius Appointment at the Apple Store, take your laptop in and get them to help you upgrade it.

  • TS3899 sometimes my sound doesnot work.i m using 4s

    hi i have been isuing iphone 4s nearly 2 years.i m enjoying with the phone.but last month i was upset with the sound service.suddenly the sound doesnot work .i cant hear any song or ring tone.even though the sound key does not work.after half an hour the sound comes again.the problem occur almost every day.i m staying now in bangladesh.thesomethingre are no applle store in our country.my phone is my besr frnd but now it often make ****** me off.plz do somthing plz

    Hello muzaherul hoque,
    I would start troubleshooting your iPhone with the following steps:
    Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
    Make sure the Ring/Silent switch is not switched to silent.
    While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
    Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
    For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
    If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
    Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
    If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (choose Settings > General > Bluetooth).
    Restart the iPhone.
    If restarting the iPhone doesn't resolve the issue, try restoring the device.
    If the issue persists, go to the Service Answer Center - iPhone for information on service.
    via: iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Sincerely,
    Delgadoh

  • Mini-Displayport to DVI adapter not working, but Mini-Displayport to VGA and Thunderbolt work fine

    Mini-Displayport to DVI adapter not working, but Mini-Displayport to VGA and Thunderbolt work fine.
    This is a brand new MacBook Pro (15-inch, mid-2012) just received.  I suspect that this is a hardware problem as:
    The mini-displayport to DVI adapter and the external monitor that I am utilizing connect and operate just fine using my older MacBook Pro (mid-2010) with the same OS.
    The new MacBook Pro powers the external monitor with a mini-displayport to VGA adapater without issue.
    The new MacBook Pro powers an Apple Thunderbolt display without issue.
    Both MacBook Pro's are running OSX Lion 10.7.4.
    The only combination which does not work is the mini-displayport to DVI adapater used in conjunction with the brand new MacBook Pro (mid-2012).
    All adapters and components (mini-displayport adapters) are Apple retail adapter.
    I have tried several external monitors, including my Dell U2412m.
    When I connect the mini-displayport to DVI adapater to the new MacBook Pro (mid-2012), nothing happens. The external monitor reports "no signal" and attempts to go into sleep mode.  Using the "Detect displays" button has no effect, even when used multiple times.  Rebooting does not help, nor does resetting the SMC or PRAM.
    Any other suggestions before I take it to the Genius Bar?

    I turns out that the logic board of my MacBook Pro was faulty (despite being brand new).
    I took it to the Apple Store, presented the problem, and one of the Tech's came to the same conclusion that I had -- hardware failure.  Phone support was no help in the matter (and even told me that what I was trying to do wasn't a supported option, which is rediculous).  However, the Genius Bar did take care of the problem, and my MacBook Pro was back to me with a replaced logic board within a few days.
    Hope that htis helps.

  • Mini dvi to dvi adapter not working with monitor

    arright *** i got a mini dvi to dvi adapter which is connected to my vga monitor through a vga to dvi adapter. The computer recognizes the monitor in display preferences, but the monitor doesn't display anything it just sits in standby mode... any ideas why this isn't working? You'd think if the problem was going from vga-vga to dvi adapter-dvi to mini dvi adapter that it wouldn't even recognize the monitor but it does.
    well that *****, back to best buy to get the other one. Reason i got the dvi one is because i plan on getting a different monitor with dvi soon. But noo dvi adapter wont work with vga adapters.
    Message was edited by: Veiss

    The mini-DVD to DVI adapter doesn't pass through the analog video signals needed for VGA, so won't work with a DVI to VGA adapter. All the control signals are there, so the display is recognized, but there will be no picture.
    They could have used a DVI-D connector on the adapter, instead of DVD-I, so the DVI to VGA adapter wouldn't even plug in, but then it couldn't be used with some non-Apple LCDs, that use DVD-I connecters.

  • MiniDVI to VGA adapter not working

    Just last night the adapter was working fine at home connected to CRT display.
    But now at office it is not working connected to LCD.
    Nothing happen at all, MacBook doesn't detect the connection. Nothing on System Preference > Display, and nothing on About this Mac > More Info.
    Looking at the adapter pins (male MiniDVI), at first I thought 2 of the pins fell off or something but after checking internet, those pins (21 and 23) originally not installed. Thats fine.
    However, some of the other pins are shorter than others.
    Is this a defect or original condition also.
    I am not sure the problem is with the adapter or the MacBook connector or the LCD.
    Can somebody assist.
    Thanks.
    -will try again on the CRT when I get home.

    yup. but it still didn't detect.
    by the way, the connection with the LCD was working fine 2 days ago.
    so i guess the problem is either with the adapter or the MacBook's connector.
    is there any way to check whether it is one or the other?
    (other than taking them to the service center)
    Thanks Mort.
    MacBook   Mac OS X (10.4.9)  

  • Mini DVI - Video Adapter, Not Working?

    I would like to use my standard definition television as an external display for my Macbook (late 2008 model running OS X 10.6.6), so I purchased a mini DVI-video adapter. I connected the adapter to my Macbook, then an S-video cable to the adapter, and then the S-video cable to my TV. Doing this makes the Macbook screen fade to blue then back to the regular screen, however the TV seems to not even register for it continues to show nothing. In my display settings there is a button for detecting external monitors, though when pushed nothing happens.
    I have tried to change the screen resolution and nothing happens. Also I have substituted a composite cable for the s-video cable and nothing seems to happen.
    CAN SOMEONE HERE PLEASE HELP ME SOLVE THIS ISSUE, OR ADVISE ME ON WHAT I SHOULD DO NEXT?

    Are you sure the adapter is compatible with your MB? There is a list here that should tell you if it will work or not.
    http://support.apple.com/kb/HT3235

  • StarTech Adapter not working with Dell Inspiron 15, model 3521

    Side Note: I wrote a reply to a thread that was from 2013. I do apologize because the link was sent to me by my bf and I did not realize how old it was. Since my reply has to be approved I can't delete it.
    Current Issue: StarTech Adapter not working with Dell Inspiron 15 model 3521 
    I bought my Dell laptop last year and at first I did not realize that it had only one audio jack (combo, as the specifications manual says), I only noticed when I was trying to plug in my Ozone Rage ST headset.
    I searched online threads and found out that I needed an adapter and most people mentioned Headset Buddy. I couldn't find any adapters for sale in my country (or employees didn't really know what I was talking about) and since Headset Buddy is a bit expensive, I decided to try StarTech Headset adapter for headsets with separate headphone/microphone plugs - 3.5mm 4 position to 2x 3 position 3.5mm M/F www.amazon.com/.../ref=cm_cr_pr_product_top.
    It arrived today and let me tell you that I can't make it work. I can hear everything but I can't get the external mic to work or even be detected. I have always used my headset (mostly for gaming) and I prefer to use my external mic rather than the internal one. First I connected my headphone and mic jacks to the adapter and only after that did I connect it to the laptop combo jack. I also tried vice-versa. It didn't work, regardless of the order. I even tried with a different headset and it still didn't work. What else can I do?
    I have also found a thread on Dell forums saying that Headset Buddy doesn't even work on Dell Inspiron 15, model 3521. So since it doesn't work and I'm assuming StarTech doesn't, either, what am I to do/buy?! I am getting extremely frustrated and I'm very disappointed with Dell because the brand should have included with the laptop a proper working adapter for these situations and not make its customers buy an extra accessory to make whatever working gear they already had function. It just doesn't make sense to me! Either make the changes work properly or simply don't touch anything. I spent some of my savings on this laptop which, overall, is great but now I am being forced to spend more on an item to allow me to use my headset. I am running out of options here and even Dell can't seem to tell its customers with 100% certainty what really works for this specific model. 
    If I can't make the adapter work, I just hope I can return it, otherwise I'll end up with no refund and with a piece of equipment I have no other use for! 
    Any thoughts?

    Hi,
    Thanks for your reply.
    This is the first time I was forced to buy adapters such as these so I don't know if I'm doing something wrong or if there's anything else I can do to make it work. When I plug the adapter to my Dell, the laptop presents me with several options such as: headphones, headphone, speakers, skull candy headphones, etc (maybe some may have different names but since I see them in Portuguese, I'm not quite sure how they appear for someone who has the computer in English), I have picked different options and it still doesn't work, the only noticeable changes are sound quality related, I guess.

  • Pavilion G7 wireless adapter stopped working and now will no longer boot.

    I bought a Pavilion G7 about 7 months ago. 
    After a couple of months, the wireless adapter stopped working, it just disappeared from the Device Manager (Win7 Home).
    I reset the computer to factory settings and it fixed that problem.
    One month after this, the wireless adapter problem returned, I tried to use system recovery to restore it to a previous point, no luck.
    I closed the laptop after this, didn't turn it off. 
    Opened it up and decided to watch a video I had on there, I had to pause the video halfway through (used Windows media player). Came back to continue watching and the screen was black. No lightbar activity, just blackness.
    I pressed a few buttons, nothing.
    Decided to do a hard reset (hold the power button for 8 seconds) then I left it and turned it on again, the blank screen returned, no signs of life, no boot, no HDD activity, nothing. The caps lock button was on, the wireless light (of course) was orange.
    What on Earth has gone wrong? What can I do to fix this?
    Thanks.

    Hi
    You have a couple of options as I see it please find the web link given below might help you fix the issue.
    Solve Setup and Internet Connection Issues on a Wireless Network with Windows 7
    Let us know how it goes!
    *Although I am an HP employee, I am speaking for myself and not for HP.
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

Maybe you are looking for