Frequency of job

somebody knows because the frequency of job is smaller of 1 minute?
thanks

Hi Paola,
please be a little more elaborate asking questions, otherwise it's difficult to help you. I guess, you are referring to the ABAP Job scheduler or ABAP jobs in general, so please ask the question in the <a href="https://www.sdn.sap.com/sdn/collaboration.sdn?node=linkFnode2-3&contenttype=url&content=https%3A%2F%2Fforums.sdn.sap.com%2Fforum.jspa%3FforumID%3D50">ABAP forum</a>
Regards, Stefan

Similar Messages

Frequency of job BBP_GET_STATUS_2?

CRM Gurus
Can someone tell me the recommended frequency to run program BBP_GET_STATUS_2 via a background job?
Does it all depend on business requirements?
thanks.

Hi
Which SRM version are you using ?
Please reschedule the jobs for reports CLEAN_REQREQ_UP and BBP_GET_STATUS_2 with a new frequency.... and give the time interval less than 5 minutes.
The data for GR and Invoice go to SRM with the frequency of the standard job BBP_GET_STATUS_2, you can see de details for the job in the master guide, also you have to program one job to update the SC data (program CLEAN_REQREQ_UP) if you wish, give an e-mail to send you the SRM Master guide.
Related links ->
Re: Back Ground Jobs in SRM
Re: Follow on doc(PREQ) not created in teh backend
Hope this will help. Do let me know.
Regards
- Atul

Content Deployment Job - Schedule

I have a moderlately large publishing site collection with 600+ sub sites and 12000+ pages. I have received requests to increase the frequency of content deployment incremental jobs from once a day to once every hour. I have 4 web servers and 4 app
servers. My question is, will increasing the frequency of the job to every hour degrade the performance of live site? I am asking because as people are accessing my live site, the import job will be importing content too, correct?
I didnt see any best practice around how frequently should the job be run. MS only says that do no have a very long gap b/w jobs but nothing about how frequent is good and what is dangerous.
Regards, Mahesh

Hi Mahesh,
The performance of the content deployment job will be affected by many elements, so it depends on the situation what frequency the job should run.
As the content deployment incremental jobs deploys only the modified content and items directly linked to the modified content, this increases the chance for problems which can cause incremental content deployment to fail.
In case that you have a large content deployment running with several GB of content it can happen that the decompression phase takes longer than 600 seconds, and then there will be a timeout. To avoid such Timeout message, you need to increase
the RemoteTimeout value.
Please check the link below for more details:
http://blogs.technet.com/b/stefan_gossner/archive/2009/01/16/content-deployment-best-practices.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Job scheduling in DB13 for DB2 systems

Hi,
I have installed ERP 6.0 SR3 with DB2 v9.1 FP5.
Please let me know what are the jobs I have to schedule in DB13 to improve the DB performance and the frequency of jobs.
Regards,
Nallasivam.D

Read
https://www.sdn.sap.com/irj/sdn/db6
--> Database Administration Guide "SAP on IBM DB2 for Linux, UNIX, and Windows"
Markus

Trigger an Event in PI when IDOC is created

Hi Expert ,
I am working on a inbound scenario where multiple IDOC is created from one XML file . When the IDOC is getting posted in ECC then its taking time to get processed . IDOC is getting processed by a batch job RBDAPPO1 and it is scheduled after every 30 min so IDOC processing is delayed for 30 min if it is getting posted just after the completion Job . We can't increase the frequency of job at its taking lot of resource .
So is it possible to create an event when IDOC arrives in ECC which will run the job program i.e instead of running the background job at scheduled time is it possible to raise an event while posting IDOC so RBDAPP01 can be run just after the IDOC is received in ECC.
There is an option of Process IDOC immediately in parter profile but we don't have to go for that as at one time lots of IDOC is being posted in ECC.
Regards,
Saurabh

Hi,
interesting topic !
I add two info:
1. By using a dummy idoc or a proxy call (interesting idea) to trigger a job, be careful of one point: in PI, when idocs will be sent to ECC... well... PI will use different queues (SMQ2)... And so maybe your dummy idoc will use a "faster" queue and will arrive before all the other idocs. and the result will be not this one that you want !
Solution: EOIO by specifying a unique queue... but in that case, if there is a pb between PI and ECC, it's ALL the next exchanged of this interface which will be in status "wait inside the queue"... until you solve the first error.
2. with you dummy idoc, How to trigger a job to run your idocs... it's "easy", it's just in the function module linked to your dummy Idoc, that either you run directly RBDAPP01 with your specific Message Type, idoc type, parter, date, etc... (*) or your program create a job which to the same (personally I prefer this solution).
(*) as suggest by another guy, do a generic "dummy idoc".
Regards.
Mickael

Automation of load

Hello -
I have a scenario like this, appreciate if any BW gurus help me.
Existing Cube : A.
Cubes : X(daily snapshot data) and Y(monthly snapshot data).
MultiProvider : Z
Load Latest 3 months (92 requests) data on daily wise into the X cube from already existing cube A.
Once new month load is started, we need to automate the process of loading the previous 3rd month first day data requests from X into Y cube. After successful load into the Y cube, delete all the daily load requests in X cube for the previous 3rd Month (requests) only, so that we have only the daily loads for the current 3 months in the X cube.
Y cube should only contain data for 1st day of every month excluding the current 3 months.
This process needs to be automated when there is a start of New Month.
I wanted to know where exactly I need to write the code for the automation.
Hope this is clear.
Thanks in advance.
Praveen

Hi Praveen,
You can do this using process chain.
1)You can make the process chain to be trigered by an event.
You do so by having the Job that start the PC start after an Event.
Then you define your set of job's (thru SM37) and make sure these jobs fire the event that starts the PC.
There is an ABAP program you can use that fires events (FM -> BP_EVENT_RAISE).
2)In the Start process of your process chain, select Direct Scheduling and then click the Change Selections icon. This will bring you to the Start Time window where you can put in the Date/Time you want to start your process chain. At the bottom of this window, click on the Periodic job box and you will notice another icon way at the bottom called Period Values. Click this to determine what frequency the job should be rescheduled (ie. daily, weekly, etc.).
3)you can do this by right-clicking on the start process, selection "Maintain Variant", choose "Direct Scheduling". Next select "Change Selections", pick your date and time, set your period values and you're done.
Hope this helps.
****Assign Points If Helpful****
Thanks,
Amith

Export and Import data or Matadata only

Aloha,
I need to update an instance, update data only with a full dump. What parameter should i use on import. How can i drop the schema without touching the metadata and database objects?
Thanks in advance.
Hades

TheHades0210 wrote:
Hi,
Yes, i will import a full dump export but data only that i need to import and existing db_objects and metadata on the instance should not be touch.
Regards,
Hadeseasy as pie
[oracle@localhost ~]$ impdp help=yes
Import: Release 11.2.0.2.0 - Production on Mon Feb 4 19:57:10 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
The Data Pump Import utility provides a mechanism for transferring data objects
between Oracle databases. The utility is invoked with the following command:
     Example: impdp scott/tiger DIRECTORY=dmpdir DUMPFILE=scott.dmp
You can control how Import runs by entering the 'impdp' command followed
by various parameters. To specify parameters, you use keywords:
     Format: impdp KEYWORD=value or KEYWORD=(value1,value2,...,valueN)
     Example: impdp scott/tiger DIRECTORY=dmpdir DUMPFILE=scott.dmp
USERID must be the first parameter on the command line.
The available keywords and their descriptions follow. Default values are listed within square brackets.
ATTACH
Attach to an existing job.
For example, ATTACH=job_name.
CLUSTER
Utilize cluster resources and distribute workers across the Oracle RAC.
Valid keyword values are: [Y] and N.
CONTENT
Specifies data to load.
Valid keywords are: [ALL], DATA_ONLY and METADATA_ONLY.
DATA_OPTIONS
Data layer option flags.
Valid keywords are: SKIP_CONSTRAINT_ERRORS.
DIRECTORY
Directory object to be used for dump, log and SQL files.
DUMPFILE
List of dump files to import from [expdat.dmp].
For example, DUMPFILE=scott1.dmp, scott2.dmp, dmpdir:scott3.dmp.
ENCRYPTION_PASSWORD
Password key for accessing encrypted data within a dump file.
Not valid for network import jobs.
ESTIMATE
Calculate job estimates.
Valid keywords are: [BLOCKS] and STATISTICS.
EXCLUDE
Exclude specific object types.
For example, EXCLUDE=SCHEMA:"='HR'".
FLASHBACK_SCN
SCN used to reset session snapshot.
FLASHBACK_TIME
Time used to find the closest corresponding SCN value.
FULL
Import everything from source [Y].
HELP
Display help messages [N].
INCLUDE
Include specific object types.
For example, INCLUDE=TABLE_DATA.
JOB_NAME
Name of import job to create.
LOGFILE
Log file name [import.log].
NETWORK_LINK
Name of remote database link to the source system.
NOLOGFILE
Do not write log file [N].
PARALLEL
Change the number of active workers for current job.
PARFILE
Specify parameter file.
PARTITION_OPTIONS
Specify how partitions should be transformed.
Valid keywords are: DEPARTITION, MERGE and [NONE].
QUERY
Predicate clause used to import a subset of a table.
For example, QUERY=employees:"WHERE department_id > 10".
REMAP_DATA
Specify a data conversion function.
For example, REMAP_DATA=EMP.EMPNO:REMAPPKG.EMPNO.
REMAP_DATAFILE
Redefine data file references in all DDL statements.
REMAP_SCHEMA
Objects from one schema are loaded into another schema.
REMAP_TABLE
Table names are remapped to another table.
For example, REMAP_TABLE=HR.EMPLOYEES:EMPS.
REMAP_TABLESPACE
Tablespace objects are remapped to another tablespace.
REUSE_DATAFILES
Tablespace will be initialized if it already exists [N].
SCHEMAS
List of schemas to import.
SERVICE_NAME
Name of an active Service and associated resource group to constrain Oracle RAC resources.
SKIP_UNUSABLE_INDEXES
Skip indexes that were set to the Index Unusable state.
SOURCE_EDITION
Edition to be used for extracting metadata.
SQLFILE
Write all the SQL DDL to a specified file.
STATUS
Frequency (secs) job status is to be monitored where
the default [0] will show new status when available.
STREAMS_CONFIGURATION
Enable the loading of Streams metadata
TABLE_EXISTS_ACTION
Action to take if imported object already exists.
Valid keywords are: APPEND, REPLACE, [SKIP] and TRUNCATE.
TABLES
Identifies a list of tables to import.
For example, TABLES=HR.EMPLOYEES,SH.SALES:SALES_1995.
TABLESPACES
Identifies a list of tablespaces to import.
TARGET_EDITION
Edition to be used for loading metadata.
TRANSFORM
Metadata transform to apply to applicable objects.
Valid keywords are: OID, PCTSPACE, SEGMENT_ATTRIBUTES and STORAGE.
TRANSPORTABLE
Options for choosing transportable data movement.
Valid keywords are: ALWAYS and [NEVER].
Only valid in NETWORK_LINK mode import operations.
TRANSPORT_DATAFILES
List of data files to be imported by transportable mode.
TRANSPORT_FULL_CHECK
Verify storage segments of all tables [N].
TRANSPORT_TABLESPACES
List of tablespaces from which metadata will be loaded.
Only valid in NETWORK_LINK mode import operations.
VERSION
Version of objects to import.
Valid keywords are: [COMPATIBLE], LATEST or any valid database version.
Only valid for NETWORK_LINK and SQLFILE.
The following commands are valid while in interactive mode.
Note: abbreviations are allowed.
CONTINUE_CLIENT
Return to logging mode. Job will be restarted if idle.
EXIT_CLIENT
Quit client session and leave job running.
HELP
Summarize interactive commands.
KILL_JOB
Detach and delete job.
PARALLEL
Change the number of active workers for current job.
START_JOB
Start or resume current job.
Valid keywords are: SKIP_CURRENT.
STATUS
Frequency (secs) job status is to be monitored where
the default [0] will show new status when available.
STOP_JOB
Orderly shutdown of job execution and exits the client.
Valid keywords are: IMMEDIATE.

Process Chains with Event Trigger

Hi Experts,
Happy Valentine day.
I have a requirement to run a Process Chain using Event IDs. Now these Evenrt ID should be triggered by a Program which raises this Eovent. Then this Program should be scheduled in BAckground to run periodically. Has anyone done this before. If yes, could you please shower some light on this topic with details on the steps.
Thanks
DV

Hi,
1)You can make the process chain to be trigered by an event.
You create user events in SM62. In SM62, next to "User even names", click on Maintain and press Enter. Click on the Create icon to create a new event (let's call it ZEVENT).
Next, in your process chain, change the Start variant to be scheduled "After event", and put in ZEVENT for the event name. Also, click on the "Periodic job" at the bottom. This will automatically reschedule the jobs for the process chain after it executes.
Next, create an ABAP program (let's call it Z_EVENT_RAISE) to call the function module BP_EVENT_RAISE. You're code can look like this:
codeREPORT Z_EVENT_RAISE.
PARAMETERS: P_EVENT LIKE TBTCO-EVENTID.
CALL FUNCTION 'BP_EVENT_RAISE'
EXPORTING
EVENTID = P_EVENT.
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.[/code]
This ABAP program will prompt for an event name, so you will need to create a variant (let's call it ZEVENT) which will save the value of the event name (also ZEVENT). You will need the variant name to be able to trigger the event in a batch job.
Now all you need is the batch job. Use tcode SM36 to create a batch job where you call the ABAP program (Z_EVENT_RAISE) using the variant (ZEVENT).
Note, SM64 only triggers an event manually.
and you can copy this job to schedule it three times a day.
2)In the Start process of your process chain, select Direct Scheduling and then click the Change Selections icon. This will bring you to the Start Time window where you can put in the Date/Time you want to start your process chain. At the bottom of this window, click on the Periodic job box and you will notice another icon way at the bottom called Period Values. Click this to determine what frequency the job should be rescheduled (ie. daily, weekly, etc.).
3)you can do this by right-clicking on the start process, selection "Maintain Variant", choose "Direct Scheduling". Next select "Change Selections", pick your date and time, set your period values and you're done.
Thanks,
JituK

Process Chain Adhoc schedule

Dear Experts,
I have daily schedule of Process chains . At the time of month end due to offline backup or at the time patch upgradation we need to stop the schedule for that day and next day again put in schedule.
Is there any way to define custom schedule like exclude certain days.
Regards,
Manish

Hi Manish,
1)You can make the process chain to be trigered by an event.
You do so by having the Job that start the PC start after an Event.
Then you define your set of job's (thru SM37) and make sure these jobs fire the event that starts the PC.
There is an ABAP program you can use that fires events (FM -> BP_EVENT_RAISE).
2)In the Start process of your process chain, select Direct Scheduling and then click the Change Selections icon. This will bring you to the Start Time window where you can put in the Date/Time you want to start your process chain. At the bottom of this window, click on the Periodic job box and you will notice another icon way at the bottom called Period Values. Click this to determine what frequency the job should be rescheduled (ie. daily, weekly, etc.).
3)you can do this by right-clicking on the start process, selection "Maintain Variant", choose "Direct Scheduling". Next select "Change Selections", pick your date and time, set your period values and you're done.
Hope this helps.
****Assign Points If Helpful****
Regards,
Ravikanth

How to trigger Process after Event

Hi,
I am trying to trigger a PC after an Event. This event is another PC variant. I know this will be Event= RSPROCESS but, How to get the value for Parameter.
Thanks in Advance

For Process Chain Adhoc scheduling
1)You can make the process chain to be trigered by an event.
You do so by having the Job that start the PC start after an Event.
Then you define your set of job's (tcode: SM37) and make sure these jobs fire the event that starts the PC.
There is an ABAP program you can use that fires events (FM -> BP_EVENT_RAISE).
try this in your ABAPcode:
CALL FUNCTION 'BP_EVENT_RAISE'
EXPORTING
eventid = 'Your Event'
eventparm = 'START'
target_instance = ' '
EXCEPTIONS
OTHERS = 01.
schedule ur process chain,
2)In the Start process of your process chain, select Direct Scheduling and then click the Change Selections icon. This will bring you to the Start Time window where you can put in the Date/Time you want to start your process chain. At the bottom of this window, click on the Periodic job box and you will notice another icon way at the bottom called Period Values. Click this to determine what frequency the job should be rescheduled (ie. daily, weekly, etc.).
3) u can do this by an alternate way--> click start process, --> selection "Maintain Variant", choose "Direct Scheduling". Next select "Change Selections", pick your date and time, set your period values , and activate it.

Quartz + mysql confused..

Hey guys,
I just start to use quartz yesterday. and i got a problem here.
i followed the other people's post to construct quartz.properties as this:
# Configure Main Scheduler Properties
org.quartz.scheduler.instanceName = TestScheduler
org.quartz.scheduler.instanceId = one
# Configure ThreadPool
org.quartz.threadPool.class = org.quartz.simpl.SimpleThreadPool
org.quartz.threadPool.threadCount = 5
org.quartz.threadPool.threadPriority = 4
# Configure JobStore
org.quartz.jobStore.misfireThreshold = 5000
org.quartz.jobStore.class = org.quartz.impl.jdbcjobstore.JobStoreTX
org.quartz.jobStore.driverDelegateClass = org.quartz.impl.jdbcjobstore.StdJDBCDelegate
org.quartz.jobStore.dataSource = myDS
org.quartz.jobStore.tablePrefix = QRTZ_
# Configure Datasources
org.quartz.dataSource.myDS.driver = com.mysql.jdbc.Driver
org.quartz.dataSource.myDS.URL = jdbc:mysql://localhost:3306/sitemapper
org.quartz.dataSource.myDS.user = root
org.quartz.dataSource.myDS.password = root
org.quartz.dataSource.myDS.maxConnections 5
the quartz tables are created by quartz's tables_mysql.sql. i can see those tables are good in mysql db server.
my testing job will be very easy, just make it display "hello" every second every day.
and here is the code:
package test;
import org.quartz.*;
public class QuartzReport implements Job
public void execute(JobExecutionContext cntxt) throws JobExecutionException
System.out.println("Hello"
+ cntxt.getJobDetail().getJobDataMap().get("type"));
public static void main(String[] args)
try
SchedulerFactory schedFact = new org.quartz.impl.StdSchedulerFactory();
Scheduler sched = schedFact.getScheduler();
sched.start();
JobDetail jobDetail = new JobDetail("Income Report",
"Report Generation", QuartzReport.class);
jobDetail.getJobDataMap().put("type", "FULL");
CronTrigger trigger = new CronTrigger("Income Report",
"Report Generation");
trigger.setCronExpression("* * * * * ?");
sched.scheduleJob(jobDetail, trigger);
catch (Exception e)
e.printStackTrace();
but how can i add this frequency and job in the database out there?? i am confused. please help me. many thanks!

Hi JbloodH,
You are on the way.
I beleive you have configured your 'Quartz.properties' file properly.
Now your next step should be Just run your Job and Quartz will automatically manage your database for you. As soon as you start your 'Scheduler', you find one row inserted into both 'qrtz_triggers' and 'qrtz_job_details'
Hope this may helpful to you.
Allwyn

Advice me regarding the certification path for 10g database certification.

Hello friends,
I am planning to take the certification for Oracle 10g database Associate, and am confused about the codes of the tests I need to take.
I have following queries:-
1) Is it enough to take 1Z0-042, to take Oracle Certified Associate, certification?
2) Is it necessary to take 1Z0-047 as a support for this certification?
3) Would I be considered for job openings if I get certified? (I mean the frequency of jobs). I know it is hard to answer this question, however I want an idea of applying for certified related jobs that accept OCA.
Please advice me in this regard.
Thanks in advance
Murli

Please post any other certification-related questions in the forum: Oracle Certification Program
To become OCA you need to do the 1z0-042 exam and one of the following exams: 1z0-007, 1z0-051, 1z0-047.
Becoming certified will put you in front of many people, but what employers are mostly looking for is experience. Many companies require a certification for the person to be even eligible for the interview, others use it as a differential.

Scheduling a process chain running in a specific hour

hi,
Is there any other way to schedule the process chain to run in a specific time besides using different meta chains to call the main process chain to do the loads separately.
Can we do this by using one main process chain?
for example, this is performed daily (hourly load: 4am load, 9am till 9pm load).
willie

Hi,
Process Chains:
From 3.x onwords to automate loads as well as process like Openhub,ababp
programs or activations or etc., We are using this process chains.
Coming to the major advantage
Like eariler infopakge groups if any pak fails we need to trigger all the loads
manully .wher as in Pchaing just correct that particular ipak and repaeat from that
particular process .it will take care abt remaing subsequent chain .
And also we can trigger parallel loads as well in this. Its much user friendly in monitoring.
1)You can make the process chain to be trigered by an event.
You do so by having the Job that start the PC start after an Event.
Then you define your set of job's (thru SM37) and make sure these jobs fire the event that starts the PC.
There is an ABAP program you can use that fires events (FM -> BP_EVENT_RAISE).
2)In the Start process of your process chain, select Direct Scheduling and then click the Change Selections icon. This will bring you to the Start Time window where you can put in the Date/Time you want to start your process chain. At the bottom of this window, click on the Periodic job box and you will notice another icon way at the bottom called Period Values. Click this to determine what frequency the job should be rescheduled (ie. daily, weekly, etc.).
3)you can do this by right-clicking on the start process, selection "Maintain Variant", choose "Direct Scheduling". Next select "Change Selections", pick your date and time, set your period values and you're done.
You can Schedule process chain in background by right-clicking on the start process, selection "Maintain Variant", choose "Direct Scheduling". Next select "Change Selections", pick your date and time, set your period values and you're done.
Hope it helps.
*****Assign points if helpful*******
Thanks,
Amith

Process chain 3 times schedule a day

Hi Experts,
In my requirement is to schedule the process chain 3 times a day but different times like 5am, 12pm, and 4pm.
Could you please anyone reply to step by step procedure.
Advance thanks
Regards,
Sathis

Hi,
1)You can make the process chain to be trigered by an event.
You create user events in SM62. In SM62, next to "User even names", click on Maintain and press Enter. Click on the Create icon to create a new event (let's call it ZEVENT).
Next, in your process chain, change the Start variant to be scheduled "After event", and put in ZEVENT for the event name. Also, click on the "Periodic job" at the bottom. This will automatically reschedule the jobs for the process chain after it executes.
Next, create an ABAP program (let's call it Z_EVENT_RAISE) to call the function module BP_EVENT_RAISE. You're code can look like this:
codeREPORT Z_EVENT_RAISE.
PARAMETERS: P_EVENT LIKE TBTCO-EVENTID.
CALL FUNCTION 'BP_EVENT_RAISE'
EXPORTING
EVENTID = P_EVENT.
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.[/code]
This ABAP program will prompt for an event name, so you will need to create a variant (let's call it ZEVENT) which will save the value of the event name (also ZEVENT). You will need the variant name to be able to trigger the event in a batch job.
Now all you need is the batch job. Use tcode SM36 to create a batch job where you call the ABAP program (Z_EVENT_RAISE) using the variant (ZEVENT).
Note, SM64 only triggers an event manually.
and you can copy this job to schedule it three times a day.
2)In the Start process of your process chain, select Direct Scheduling and then click the Change Selections icon. This will bring you to the Start Time window where you can put in the Date/Time you want to start your process chain. At the bottom of this window, click on the Periodic job box and you will notice another icon way at the bottom called Period Values. Click this to determine what frequency the job should be rescheduled (ie. daily, weekly, etc.).
3)you can do this by right-clicking on the start process, selection "Maintain Variant", choose "Direct Scheduling". Next select "Change Selections", pick your date and time, set your period values and you're done.
Hope this helps.
Regards
CSM Reddy

Scheduling of a process chain

Hi All gurus,
i want to automatically schedule a process chain at a fixed time each day.
Is it feasible?
Could you please tell me how to proceed?
Thanks in adv,
Federico

In the Start process of your process chain, select Direct Scheduling and then click the Change Selections icon. This will bring you to the Start Time window where you can put in the Date/Time you want to start your process chain. At the bottom of this window, click on the Periodic job box and you will notice another icon way at the bottom called Period Values. Click this to determine what frequency the job should be rescheduled (ie. daily, weekly, etc.).
Hope this helps.

Frequency of job

Similar Messages

Maybe you are looking for